diff options
Diffstat (limited to 'config/libc/glibc.in.2')
-rw-r--r-- | config/libc/glibc.in.2 | 268 |
1 files changed, 267 insertions, 1 deletions
diff --git a/config/libc/glibc.in.2 b/config/libc/glibc.in.2 index 84553f3..346f9b7 100644 --- a/config/libc/glibc.in.2 +++ b/config/libc/glibc.in.2 @@ -1 +1,267 @@ -source "config/libc/glibc-eglibc.in-common" +# This file contains the common configuration options +# that apply to both glibc. + +# Some architectures require the ports addon. List them one by one here: +# This list must be carefully in sync with the architectures names +# we can find in config/arch/* + +config LIBC_GLIBC_PORTS_EXTERNAL + bool + default n + +config LIBC_GLIBC_MAY_FORCE_PORTS + bool + default y if ARCH_arm + default y if ARCH_mips + select LIBC_GLIBC_USE_PORTS + depends on !LIBC_GLIBC_2_20_or_later + +# Force using the BFD linker during the toolchain build +config LIBC_glibc_familly + bool + default y + select BINUTILS_FORCE_LD_BFD + +config LIBC_GLIBC_EXTRA_CONFIG_ARRAY + string + prompt "extra config" + default "" + help + Extra flags to pass onto ./configure when configuring. + + You can enter multiple arguments here, and arguments can contain spaces + if they are properly quoted (or escaped, but prefer quotes). Eg.: + --with-foo="1st arg with 4 spaces" --with-bar=2nd-arg-without-space + +config LIBC_GLIBC_CONFIGPARMS + string + prompt "Extra config params (READ HELP)" + default "" if ! ARCH_sh + default "no-z-defs=yes" if ARCH_sh + help + Some architectures need to set options in the file configparms. + This is the case for sh3/4, which really need to set configparms + to "no-z-defs=yes" as of gcc-3.4/glibc-2.3.2. + + Unless you are building a toolchain for sh3/4, you should leave that empty. + + Note: If you need to pass more than one value, separate them with + '\n'. Eg.: var1=val1\nvar2=val2 + +config LIBC_GLIBC_EXTRA_CFLAGS + string + prompt "extra target CFLAGS" + default "" + help + Extra target CFLAGS to use when building. + +config LIBC_EXTRA_CC_ARGS + string + prompt "gcc extra flags" + default "" + help + Extra flags to pass gcc when building. + + Seldom used, except for sparc64 which seems to need the flag -64 + to be passed onto gcc. + +config LIBC_ENABLE_FORTIFIED_BUILD + bool + prompt "Enable fortified build (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + If you say 'y' here, then glibc will be using fortified versions + of functions with format arguments (eg. vsyslog, printf...), and + do a sanity check on the format at runtime, to avoid some of the + common format string attacks. + + This is currently not supported, and will most probably result in + a broken build, with an error message like: + ../misc/syslog.c: In function '__vsyslog_chk': + ../misc/syslog.c:123: sorry, unimplemented: inlining failed in + call to 'syslog': function body not available + + If you are brave enough and want to debug the issue, then say 'y' + here. Otherwise, be still and say 'n' (the default). ;-) + + +config LIBC_DISABLE_VERSIONING + bool + prompt "Disable symbols versioning" + help + Do not include versioning information in the library objects. + +config LIBC_OLDEST_ABI + string + prompt "Oldest supported ABI" + default "" + help + Set the oldest ABI supported by the C library. + + Setting this option, for example, to 2.2 will provide ABI support + back to (e)glibc-2.2. + + If this option is not set, (e)glibc will choose for you. + +config LIBC_GLIBC_FORCE_UNWIND + bool + prompt "Force unwind support (READ HELP!)" + default y + help + If your toolchain fails building while building the C library + start files, or the complete C library, with a message like: + configure: error: forced unwind support is required + + then you may try changing this option. Otherwise, leave it to + the default 'y'. + + The issue seems to be related to building NPTL on old versions + of glibc on some architectures + (seen on s390, s390x and x86_64). + +config LIBC_GLIBC_USE_PORTS + bool + prompt "Use the ports addon" + depends on !LIBC_GLIBC_2_20_or_later + help + The ports addon contains some architecture ports that are not available + in the official distribution. + + For example, this is the case for ARM with glibc-2.4 and above. + + Say n only if you're sure that your architecture is in the official + distribution for your chosen version. + +config LIBC_ADDONS_LIST + string + prompt "Extra addons" + default "" + help + Extra addons to include. Space separated list. + + You need to specify neither linuxthreads nor nptl, as they are added + automagically for you depending on the threading model you chose + earlier. + + Eg.: crypt (for very old libces) + +if LIBC_GLIBC_USE_PORTS || ( LIBC_ADDONS_LIST != "" ) +comment "WARNING !!! " +comment "| For glibc >= 2.8, it can happen that the tarballs " +comment "| for the addons are not available for download. " +comment "| If that happens, bad luck... Try a previous version " +comment "| or try again later... :-( " +endif + +config LIBC_LOCALES + bool + prompt "Build and install locales" + help + Whether to build and install the libc locale files for the target, + which is required in order to support internationalization. + +if LIBC_glibc && LIBC_LOCALES +comment "WARNING! " +comment "| The built locales will be usable if and only if the build " +comment "| machine and the target: " +comment "| - have the same endianness, " +comment "| - and have the same alignment requirements for uint32_t. " +comment "| You will have to check by yourself (for now). " +endif # LIBC_glibc && LIBC_LOCALES + +if KERNEL_linux + +choice LIBC_GLIBC_SUPPORTED_KERNEL + bool + prompt "Minimum supported kernel version" + default LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS + +config LIBC_GLIBC_KERNEL_VERSION_NONE + bool + prompt "Let ./configure decide" + help + Let ./configure decide what minimum kernel version glibc will be + able to run against. + + This will include legacy compatibility code for older kernels in + the C library, thus ensuring that it will run on a large number + of old kernels. + + The minimum kernel version supported will be dependent upon the + target you build for. For example: + alpha*-*-linux-gnu Requires Linux 2.6.9 for NPTL + sh[34]-*-linux-gnu Requires Linux 2.6.11 + powerpc* Requires Linux 2.4.19 + arm*-*-linux-*gnueabi Requires Linux 2.6.16 + +config LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS + bool + prompt "Same as kernel headers (default)" + help + Normally, you'll want glibc to run against the same kernel + version as the one used for the headers. + + This is the default. + + If enabled, crosstool-ng will use the chosen version of kernel + headers for the glibc minimum kernel version supported, which is + what gets passed to "--enable-kernel=" when configuring glibc. + + Enabling this will ensure that no legacy compatibility code for + older kernels is built into your C libraries, but it will + be unable to run on kernel versions older than whichever kernel + headers version you've built the toolchain for. + + If you know for sure that your toolchain will never need to build + applications that will run under a kernel version older than your + chosen kernel headers version (CT_KERNEL_VERSION), you can choose + "y" here. + +config LIBC_GLIBC_KERNEL_VERSION_CHOSEN + bool + prompt "Specific kernel version" + help + Specify the earliest Linux kernel version you want glibc to + include support for. This does not have to match the kernel + headers version used for your toolchain. This controls what is + passed to the "--enable-kernel=" option to the glibc configure + script. + + If you want to be able to statically link programs with your + toolchain's C library, make sure this kernel version is lower than + all kernels you wish to support to avoid "FATAL: kernel too old" + errors. The higher the version you specify, the less legacy code + will be built into libc. + + Most people can leave this at the default value of "2.6.9". + +if LIBC_GLIBC_KERNEL_VERSION_CHOSEN + +config LIBC_GLIBC_MIN_KERNEL_VERSION + string + prompt "Minimum kernel version to support" + default "2.6.9" + help + Enter here the lowest kernel version glibc will be able to run against. + + The minimum kernel version supported will be dependent upon the + target you build for. For example: + alpha*-*-linux-gnu Requires Linux 2.6.9 for NPTL + sh[34]-*-linux-gnu Requires Linux 2.6.11 + powerpc* Requires Linux 2.4.19 + arm*-*-linux-*gnueabi Requires Linux 2.6.16 + + Note that no sanity check is performed by crosstool-NG to ensure + that the value you enter here is appropriate for your target. + +endif # LIBC_GLIBC_KERNEL_VERSION_CHOSEN + +endchoice + +config LIBC_GLIBC_MIN_KERNEL + string + default "" if LIBC_GLIBC_KERNEL_VERSION_NONE + default KERNEL_VERSION if LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS + default LIBC_GLIBC_MIN_KERNEL_VERSION if LIBC_GLIBC_KERNEL_VERSION_CHOSEN + +endif # KERNEL_linux |