diff options
Diffstat (limited to 'patches/gcc/3.4.5')
-rw-r--r-- | patches/gcc/3.4.5/fix-fixincl.patch | 70 | ||||
-rw-r--r-- | patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch | 82 | ||||
-rw-r--r-- | patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch | 27 | ||||
-rw-r--r-- | patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch | 24 | ||||
-rw-r--r-- | patches/gcc/3.4.5/pr15068-fix.patch | 44 |
5 files changed, 0 insertions, 247 deletions
diff --git a/patches/gcc/3.4.5/fix-fixincl.patch b/patches/gcc/3.4.5/fix-fixincl.patch deleted file mode 100644 index 7936b19..0000000 --- a/patches/gcc/3.4.5/fix-fixincl.patch +++ /dev/null @@ -1,70 +0,0 @@ -See http://gcc.gnu.org/PR22541 - -From: Dan Kegel - -When building gcc-3.4.3 or gcc-4.0.0 as a cross into a clean $PREFIX -(the only two I've tried like this), the configure script happily copies -the glibc include files from include to sys-include; here's the line -from the log file (with $PREFIX instead of the real prefix): - -Copying $PREFIX/i686-unknown-linux-gnu/include to $PREFIX/i686-unknown-linux-gnu/sys-include - -But later, when running fixincludes, it gives the error message - The directory that should contain system headers does not exist: - $PREFIX/lib/gcc/i686-unknown-linux-gnu/3.4.3/../../../../i686-unknown-linux-gnu/sys-include - -Nevertheless, it continues building; the header files it installs in - $PREFIX/lib/gcc/i686-unknown-linux-gnu/3.4.3/include -do not include the boilerplate that would cause it to #include_next the -glibc headers in the system header directory. -Thus the resulting toolchain can't compile the following program: -#include <limits.h> -int x = PATH_MAX; -because its limits.h doesn't include the glibc header. - -That's not nice. I suspect the problem is that gcc/Makefile.in assumes that -it can refer to $PREFIX/i686-unknown-linux-gnu with the path - $PREFIX/lib/../i686-unknown-linux-gnu, but -that fails because the directory $PREFIX/lib doesn't exist during 'make all'; -it is only created later, during 'make install'. (Which makes this problem -confusing, since one only notices the breakage well after 'make install', -at which point the path configure complained about does exist, and has the -right stuff in it.) - -A possible fix is to replace the line in gcc/Makefile.in that says - SYSTEM_HEADER_DIR = @SYSTEM_HEADER_DIR@ -with a version that gets rid of extra ..'s, e.g. - SYSTEM_HEADER_DIR = `echo @SYSTEM_HEADER_DIR@ | sed -e :a -e "s,[^/]*/\.\.\/,,;ta"` -(hey, that's the first time I've ever used a label in a sed script; thanks to the sed faq -for explaining the :a ... ta method of looping to repeat a search-and-replace until it doesn't match.) - - ---- gcc-3.4.3/gcc/Makefile.in.foo 2005-05-20 11:41:39.000000000 -0700 -+++ gcc-3.4.3/gcc/Makefile.in 2005-05-20 12:08:46.000000000 -0700 -@@ -350,7 +350,10 @@ - CROSS_SYSTEM_HEADER_DIR = @CROSS_SYSTEM_HEADER_DIR@ - - # autoconf sets SYSTEM_HEADER_DIR to one of the above. --SYSTEM_HEADER_DIR = @SYSTEM_HEADER_DIR@ -+# Purge it of unneccessary internal relative paths -+# to directories that might not exist yet. -+# The sed idiom for this is to repeat the search-and-replace until it doesn't match, using :a ... ta. -+SYSTEM_HEADER_DIR = `echo @SYSTEM_HEADER_DIR@ | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta` - - # Control whether to run fixproto and fixincludes. - STMP_FIXPROTO = @STMP_FIXPROTO@ -@@ -2532,11 +2535,13 @@ - $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(gcc_tooldir) - - # Build fixed copies of system files. -+# Abort if no system headers available, unless building a crosscompiler. -+# FIXME: abort unless building --without-headers would be more accurate and less ugly - stmp-fixinc: fixinc.sh gsyslimits.h - @if test ! -d ${SYSTEM_HEADER_DIR}; then \ - echo The directory that should contain system headers does not exist: >&2 ; \ - echo " ${SYSTEM_HEADER_DIR}" >&2 ; \ -- if test "x${SYSTEM_HEADER_DIR}" = "x${gcc_tooldir}/sys-include"; \ -+ if test "x${SYSTEM_HEADER_DIR}" = "x`echo "${gcc_tooldir}/sys-include" | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta`"; \ - then sleep 1; else exit 1; fi; \ - fi - rm -rf include; mkdir include diff --git a/patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch b/patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch deleted file mode 100644 index f7178c1..0000000 --- a/patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch +++ /dev/null @@ -1,82 +0,0 @@ -By Lennert Buytenhek <buytenh@wantstofly.org> -Adds support for arm*b-linux* big-endian ARM targets - -Fixes build error - -/opt/crosstool/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/armeb-unknown-linux-gnu/bin/ld: unrecognised emulation mode: armelf_linux -Supported emulations: armelfb_linux armelfb -collect2: ld returned 1 exit status -make[2]: *** [/home/dank/wk/crosstool-0.28-rc36/build/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/build-glibc/csu/crt1.o] Error 1 -make[2]: Leaving directory `/home/dank/wk/crosstool-0.28-rc36/build/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/glibc-2.3.3/csu' -make[1]: *** [csu/subdir_lib] Error 2 -make[1]: Leaving directory `/home/dank/wk/crosstool-0.28-rc36/build/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/glibc-2.3.3' -make: *** [all] Error 2 - - -See http://gcc.gnu.org/PR16350 - -diff -urN gcc-3.4.0.orig/gcc/config/arm/linux-elf.h gcc-3.4.0/gcc/config/arm/linux-elf.h ---- gcc-3.4.0.orig/gcc/config/arm/linux-elf.h 2004-01-31 07:18:11.000000000 +0100 -+++ gcc-3.4.0/gcc/config/arm/linux-elf.h 2004-07-02 14:46:29.225443757 +0200 -@@ -30,17 +30,34 @@ - /* Do not assume anything about header files. */ - #define NO_IMPLICIT_EXTERN_C - -+/* -+ * 'config.gcc' defines TARGET_BIG_ENDIAN_DEFAULT as 1 for arm*b-* -+ * (big endian) configurations. -+ */ -+#if TARGET_BIG_ENDIAN_DEFAULT -+#define TARGET_ENDIAN_DEFAULT ARM_FLAG_BIG_END -+#define TARGET_ENDIAN_OPTION "mbig-endian" -+#define TARGET_LINKER_EMULATION "armelfb_linux" -+#else -+#define TARGET_ENDIAN_DEFAULT 0 -+#define TARGET_ENDIAN_OPTION "mlittle-endian" -+#define TARGET_LINKER_EMULATION "armelf_linux" -+#endif -+ - /* Default is to use APCS-32 mode. */ - #undef TARGET_DEFAULT --#define TARGET_DEFAULT (ARM_FLAG_APCS_32 | ARM_FLAG_MMU_TRAPS) -+#define TARGET_DEFAULT \ -+ ( ARM_FLAG_APCS_32 | \ -+ ARM_FLAG_MMU_TRAPS | \ -+ TARGET_ENDIAN_DEFAULT ) - - #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm6 - --#define SUBTARGET_EXTRA_LINK_SPEC " -m armelf_linux -p" -+#define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION " -p" - - #undef MULTILIB_DEFAULTS - #define MULTILIB_DEFAULTS \ -- { "marm", "mlittle-endian", "mhard-float", "mapcs-32", "mno-thumb-interwork" } -+ { "marm", TARGET_ENDIAN_OPTION, "mhard-float", "mapcs-32", "mno-thumb-interwork" } - - #define CPP_APCS_PC_DEFAULT_SPEC "-D__APCS_32__" - -@@ -89,7 +106,7 @@ - %{rdynamic:-export-dynamic} \ - %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2} \ - -X \ -- %{mbig-endian:-EB}" \ -+ %{mbig-endian:-EB} %{mlittle-endian:-EL}" \ - SUBTARGET_EXTRA_LINK_SPEC - - #define TARGET_OS_CPP_BUILTINS() LINUX_TARGET_OS_CPP_BUILTINS() -diff -urN gcc-3.4.0.orig/gcc/config.gcc gcc-3.4.0/gcc/config.gcc ---- gcc-3.4.0.orig/gcc/config.gcc 2004-04-17 04:28:24.000000000 +0200 -+++ gcc-3.4.0/gcc/config.gcc 2004-07-02 14:44:40.045822542 +0200 -@@ -666,6 +666,11 @@ - ;; - arm*-*-linux*) # ARM GNU/Linux with ELF - tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h" -+ case $target in -+ arm*b-*) -+ tm_defines="TARGET_BIG_ENDIAN_DEFAULT=1 $tm_defines" -+ ;; -+ esac - tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux" - extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" - gnu_ld=yes diff --git a/patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch b/patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch deleted file mode 100644 index 69a79d5..0000000 --- a/patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch +++ /dev/null @@ -1,27 +0,0 @@ -# Origin: from a patch by Dimitry Andric <dimitry@andric.com>, 2004-05-01 -# See http://gcc.gnu.org/PR14352 and http://gcc.gnu.org/PR16314 -# See also http://gcc.gnu.org/ml/gcc-patches/2004-08/msg02568.html et seq for why this isn't in mainline -# Fixes errors like the following when building glibc (or any other executable -# or shared library) when using gcc 3.4.0 for ARM with softfloat: -# -# .../libc_pic.os(.text+0x15834): In function `__modf': undefined reference to `__subdf3' -# .../libc_pic.os(.text+0x158b8): In function `__modf': undefined reference to `__subdf3' -# .../libc_pic.os(.text+0x1590c): In function `scalbn': undefined reference to `__muldf3' -# .../libc_pic.os(.text+0x15e94): In function `__ldexpf': undefined reference to `__eqsf2' -# .../libc_pic.os(.text+0xcee4c): In function `monstartup': undefined reference to `__fixsfsi' - -diff -urNd gcc-3.4.0-orig/gcc/config/arm/t-linux gcc-3.4.0/gcc/config/arm/t-linux ---- gcc-3.4.0-orig/gcc/config/arm/t-linux 2003-09-20 23:09:07.000000000 +0200 -+++ gcc-3.4.0/gcc/config/arm/t-linux 2004-05-01 20:31:59.102846400 +0200 -@@ -4,7 +4,10 @@ - LIBGCC2_DEBUG_CFLAGS = -g0 - - LIB1ASMSRC = arm/lib1funcs.asm --LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx -+LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \ -+ _negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi _fixunsdfsi \ -+ _truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \ -+ _fixsfsi _fixunssfsi - - # MULTILIB_OPTIONS = mhard-float/msoft-float - # MULTILIB_DIRNAMES = hard-float soft-float diff --git a/patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch b/patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch deleted file mode 100644 index 43eed3e..0000000 --- a/patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch +++ /dev/null @@ -1,24 +0,0 @@ -# Dimitry Andric <dimitry@andric.com>, 2004-05-01 -# -# * Removed the extra -lfloat option from LIBGCC_SPEC, since it isn't needed -# anymore. (The required functions are now in libgcc.) -# -# Fixes errors like -# arm-softfloat-linux-gnu/3.4.0/../../../../arm-softfloat-linux-gnu/bin/ld: cannot find -lfloat -# collect2: ld returned 1 exit status -# make[2]: *** [arm-softfloat-linux-gnu/gcc-3.4.0-glibc-2.3.2/build-glibc/iconvdata/ISO8859-1.so] Error 1 -# when building glibc-2.3.3 with gcc-3.4.0 for arm-softfloat - -diff -urNd gcc-3.4.0-orig/gcc/config/arm/linux-elf.h gcc-3.4.0/gcc/config/arm/linux-elf.h ---- gcc-3.4.0-orig/gcc/config/arm/linux-elf.h 2004-01-31 07:18:11.000000000 +0100 -+++ gcc-3.4.0/gcc/config/arm/linux-elf.h 2004-05-01 19:19:06.935979200 +0200 -@@ -55,7 +73,7 @@ - %{shared:-lc} \ - %{!shared:%{profile:-lc_p}%{!profile:-lc}}" - --#define LIBGCC_SPEC "%{msoft-float:-lfloat} -lgcc" -+#define LIBGCC_SPEC "-lgcc" - - /* Provide a STARTFILE_SPEC appropriate for GNU/Linux. Here we add - the GNU/Linux magical crtbegin.o file (see crtstuff.c) which - diff --git a/patches/gcc/3.4.5/pr15068-fix.patch b/patches/gcc/3.4.5/pr15068-fix.patch deleted file mode 100644 index 2977765..0000000 --- a/patches/gcc/3.4.5/pr15068-fix.patch +++ /dev/null @@ -1,44 +0,0 @@ -See http://gcc.gnu.org/PR15068 - -Fixes error - -../sysdeps/generic/s_fmax.c: In function `__fmax': -../sysdeps/generic/s_fmax.c:28: internal compiler error: in elim_reg_cond, at flow.c:3257 -Please submit a full bug report, -with preprocessed source if appropriate. -See <URL:http://gcc.gnu.org/bugs.html> for instructions. -make[2]: *** [/home/dank/wk/crosstool-0.28-rc35/build/arm-unknown-linux-gnu/gcc-3.4.1-glibc-20040822/build-glibc/math/s_fmax.o] Error 1 -make[2]: Leaving directory `/home/dank/wk/crosstool-0.28-rc35/build/arm-unknown-linux-gnu/gcc-3.4.1-glibc-20040822/glibc-20040822/math' -make[1]: *** [math/others] Error 2 -make[1]: Leaving directory `/home/dank/wk/crosstool-0.28-rc35/build/arm-unknown-linux-gnu/gcc-3.4.1-glibc-20040822/glibc-20040822' -make: *** [all] Error 2 - -[ rediffed against gcc-3.4.1, with elbow grease, ending up with same thing as -http://gcc.gnu.org/cgi-bin/cvsweb.cgi/gcc/gcc/flow.c.diff?cvsroot=gcc&only_with_tag=csl-arm-branch&r1=1.563.4.2&r2=1.563.4.3 ] - ---- gcc-3.4.1/gcc/flow.c.old 2004-02-27 19:39:19.000000000 -0800 -+++ gcc-3.4.1/gcc/flow.c 2004-08-26 07:29:46.000000000 -0700 -@@ -1878,6 +1878,7 @@ - rtx set_src = SET_SRC (pc_set (BB_END (bb))); - rtx cond_true = XEXP (set_src, 0); - rtx reg = XEXP (cond_true, 0); -+ enum rtx_code inv_cond; - - if (GET_CODE (reg) == SUBREG) - reg = SUBREG_REG (reg); -@@ -1886,11 +1887,13 @@ - in the form of a comparison of a register against zero. - If the condition is more complex than that, then it is safe - not to record any information. */ -- if (GET_CODE (reg) == REG -+ inv_cond = reversed_comparison_code (cond_true, BB_END (bb)); -+ if (inv_cond != UNKNOWN -+ && GET_CODE (reg) == REG - && XEXP (cond_true, 1) == const0_rtx) - { - rtx cond_false -- = gen_rtx_fmt_ee (reverse_condition (GET_CODE (cond_true)), -+ = gen_rtx_fmt_ee (inv_cond, - GET_MODE (cond_true), XEXP (cond_true, 0), - XEXP (cond_true, 1)); - if (GET_CODE (XEXP (set_src, 1)) == PC) |