diff options
Diffstat (limited to 'patches/newlib')
-rw-r--r-- | patches/newlib/1.17.0/100-avr32.patch | 32450 |
1 files changed, 0 insertions, 32450 deletions
diff --git a/patches/newlib/1.17.0/100-avr32.patch b/patches/newlib/1.17.0/100-avr32.patch deleted file mode 100644 index 7e0520c..0000000 --- a/patches/newlib/1.17.0/100-avr32.patch +++ /dev/null @@ -1,32450 +0,0 @@ -diff -Naur newlib-1.17.0/COPYING.LIBGLOSS newlib-1.17.0-new/COPYING.LIBGLOSS ---- newlib-1.17.0/COPYING.LIBGLOSS 2008-12-18 00:16:07.000000000 +0100 -+++ newlib-1.17.0-new/COPYING.LIBGLOSS 2009-05-22 09:57:49.000000000 +0200 -@@ -228,3 +228,33 @@ - LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - SUCH DAMAGE. -+ -+(13) Atmel Corporation (avr32 targets only) -+Copyright (c) 2006, Atmel Corporation All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ -+1. Redistributions of source code must retain the above copyright notice, -+this list of conditions and the following disclaimer. -+ -+2. Redistributions in binary form must reproduce the above copyright notice, -+this list of conditions and the following disclaimer in the documentation -+and/or other materials provided with the distribution. -+ -+3. The name of ATMEL may not be used to endorse or promote products -+derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS -+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -+PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY -+DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, -+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -+OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY -+WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+POSSIBILITY OF SUCH DAMAGE. -diff -Naur newlib-1.17.0/COPYING.NEWLIB newlib-1.17.0-new/COPYING.NEWLIB ---- newlib-1.17.0/COPYING.NEWLIB 2008-12-18 00:16:07.000000000 +0100 -+++ newlib-1.17.0-new/COPYING.NEWLIB 2009-05-22 09:57:49.000000000 +0200 -@@ -767,3 +767,33 @@ - LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - SUCH DAMAGE. -+ -+(35) Atmel Corporation (avr32 targets only) -+Copyright (c) 2006, Atmel Corporation All rights reserved. -+ -+Redistribution and use in source and binary forms, with or without -+modification, are permitted provided that the following conditions are met: -+ -+1. Redistributions of source code must retain the above copyright notice, -+this list of conditions and the following disclaimer. -+ -+2. Redistributions in binary form must reproduce the above copyright notice, -+this list of conditions and the following disclaimer in the documentation -+and/or other materials provided with the distribution. -+ -+3. The name of ATMEL may not be used to endorse or promote products -+derived from this software without specific prior written permission. -+ -+THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS -+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -+PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY -+DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, -+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -+OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY -+WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+POSSIBILITY OF SUCH DAMAGE. -diff -Naur newlib-1.17.0/newlib/configure.host newlib-1.17.0-new/newlib/configure.host ---- newlib-1.17.0/newlib/configure.host 2008-12-18 00:09:09.000000000 +0100 -+++ newlib-1.17.0-new/newlib/configure.host 2009-05-22 09:57:49.000000000 +0200 -@@ -99,6 +99,10 @@ - arm) - machine_dir=arm - ;; -+ avr32*) -+ machine_dir=avr32 -+ newlib_cflags="${newlib_cflags} -ffunction-sections" -+ ;; - avr*) - newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues" - ;; -@@ -365,6 +369,9 @@ - crx*) - sys_dir= - ;; -+ avr32-*-*) -+ sys_dir=avr32 -+ ;; - d10v*) - sys_dir=d10v - ;; -@@ -575,6 +582,10 @@ - arc*) - newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED" - ;; -+ avr32*) -+ syscall_dir=syscalls -+ newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM" -+ ;; - avr*) - newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES" - ;; -diff -Naur newlib-1.17.0/newlib/libc/include/machine/ieeefp.h newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h ---- newlib-1.17.0/newlib/libc/include/machine/ieeefp.h 2008-12-11 21:05:38.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h 2009-05-22 09:57:49.000000000 +0200 -@@ -275,6 +275,10 @@ - #define _DOUBLE_IS_32BITS - #endif - -+#ifdef __AVR32__ -+#define __IEEE_BIG_ENDIAN -+#endif -+ - #if defined(__or32__) || defined(__or1k__) || defined(__or16__) - #define __IEEE_BIG_ENDIAN - #endif -diff -Naur newlib-1.17.0/newlib/libc/include/machine/setjmp.h newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h ---- newlib-1.17.0/newlib/libc/include/machine/setjmp.h 2008-12-11 21:05:38.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h 2009-05-22 09:57:49.000000000 +0200 -@@ -13,6 +13,13 @@ - #define _JBLEN 24 - #endif - -+#if defined(__AVR32__) -+/* -+ r0-r7, lr, sp -+ */ -+#define _JBLEN 10 -+#endif -+ - #ifdef __sparc__ - /* - * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext). -diff -Naur newlib-1.17.0/newlib/libc/include/machine/time.h newlib-1.17.0-new/newlib/libc/include/machine/time.h ---- newlib-1.17.0/newlib/libc/include/machine/time.h 2000-12-04 20:06:37.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/include/machine/time.h 2009-05-22 09:57:49.000000000 +0200 -@@ -6,6 +6,10 @@ - #else /* !__rtems__ */ - #if defined(__arm__) || defined(__thumb__) - #define _CLOCKS_PER_SEC_ 100 -+#else -+#if defined(__AVR32__) -+#define _CLOCKS_PER_SEC_ 1000000 -+#endif - #endif - #endif /* !__rtems__ */ - -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4 ---- newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4 2009-05-22 09:57:49.000000000 +0200 -@@ -0,0 +1,382 @@ -+dnl aclocal.m4 generated automatically by aclocal 1.4-p6 -+ -+dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -+dnl This file is free software; the Free Software Foundation -+dnl gives unlimited permission to copy and/or distribute it, -+dnl with or without modifications, as long as this notice is preserved. -+ -+dnl This program is distributed in the hope that it will be useful, -+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -+dnl PARTICULAR PURPOSE. -+ -+dnl This provides configure definitions used by all the newlib -+dnl configure.in files. -+ -+dnl Basic newlib configury. This calls basic introductory stuff, -+dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs -+dnl configure.host. The only argument is the relative path to the top -+dnl newlib directory. -+ -+AC_DEFUN(NEWLIB_CONFIGURE, -+[ -+dnl Default to --enable-multilib -+AC_ARG_ENABLE(multilib, -+[ --enable-multilib build many library versions (default)], -+[case "${enableval}" in -+ yes) multilib=yes ;; -+ no) multilib=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; -+ esac], [multilib=yes])dnl -+ -+dnl Support --enable-target-optspace -+AC_ARG_ENABLE(target-optspace, -+[ --enable-target-optspace optimize for space], -+[case "${enableval}" in -+ yes) target_optspace=yes ;; -+ no) target_optspace=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; -+ esac], [target_optspace=])dnl -+ -+dnl Support --enable-malloc-debugging - currently only supported for Cygwin -+AC_ARG_ENABLE(malloc-debugging, -+[ --enable-malloc-debugging indicate malloc debugging requested], -+[case "${enableval}" in -+ yes) malloc_debugging=yes ;; -+ no) malloc_debugging=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; -+ esac], [malloc_debugging=])dnl -+ -+dnl Support --enable-newlib-mb -+AC_ARG_ENABLE(newlib-mb, -+[ --enable-newlib-mb enable multibyte support], -+[case "${enableval}" in -+ yes) newlib_mb=yes ;; -+ no) newlib_mb=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;; -+ esac], [newlib_mb=])dnl -+ -+dnl Support --enable-newlib-iconv -+AC_ARG_ENABLE(newlib-iconv, -+[ --enable-newlib-iconv enable iconv library support], -+[case "${enableval}" in -+ yes) newlib_iconv=yes ;; -+ no) newlib_iconv=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; -+ esac], [newlib_iconv=])dnl -+ -+dnl Support --enable-newlib-builtin-converters -+AC_ARG_ENABLE(newlib-builtin-converters, -+[ --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in], -+[if test x${enableval} = x; then -+ AC_MSG_ERROR(bad value ${enableval} for newlib-builtin-converters option - use comma-separated list) -+ fi -+ builtin_converters=${enableval} -+ ], [builtin_converters=])dnl -+ -+dnl Support --enable-newlib-multithread -+AC_ARG_ENABLE(newlib-multithread, -+[ --enable-newlib-multithread enable support for multiple threads], -+[case "${enableval}" in -+ yes) newlib_multithread=yes ;; -+ no) newlib_multithread=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; -+ esac], [newlib_multithread=yes])dnl -+ -+dnl Support --enable-newlib-elix-level -+AC_ARG_ENABLE(newlib-elix-level, -+[ --enable-newlib-elix-level supply desired elix library level (1-4)], -+[case "${enableval}" in -+ 0) newlib_elix_level=0 ;; -+ 1) newlib_elix_level=1 ;; -+ 2) newlib_elix_level=2 ;; -+ 3) newlib_elix_level=3 ;; -+ 4) newlib_elix_level=4 ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; -+ esac], [newlib_elix_level=0])dnl -+ -+dnl Support --disable-newlib-io-float -+AC_ARG_ENABLE(newlib-io-float, -+[ --disable-newlib-io-float disable printf/scanf family float support], -+[case "${enableval}" in -+ yes) newlib_io_float=yes ;; -+ no) newlib_io_float=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; -+ esac], [newlib_io_float=yes])dnl -+ -+dnl Support --disable-newlib-supplied-syscalls -+AC_ARG_ENABLE(newlib-supplied-syscalls, -+[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], -+[case "${enableval}" in -+ yes) newlib_may_supply_syscalls=yes ;; -+ no) newlib_may_supply_syscalls=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; -+ esac], [newlib_may_supply_syscalls=yes])dnl -+ -+AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) -+ -+dnl We may get other options which we don't document: -+dnl --with-target-subdir, --with-multisrctop, --with-multisubdir -+ -+test -z "[$]{with_target_subdir}" && with_target_subdir=. -+ -+if test "[$]{srcdir}" = "."; then -+ if test "[$]{with_target_subdir}" != "."; then -+ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" -+ else -+ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" -+ fi -+else -+ newlib_basedir="[$]{srcdir}/$1" -+fi -+AC_SUBST(newlib_basedir) -+ -+AC_CANONICAL_SYSTEM -+ -+AM_INIT_AUTOMAKE(newlib, 1.12.0) -+ -+# FIXME: We temporarily define our own version of AC_PROG_CC. This is -+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -+# are probably using a cross compiler, which will not be able to fully -+# link an executable. This should really be fixed in autoconf -+# itself. -+ -+AC_DEFUN(LIB_AC_PROG_CC, -+[AC_BEFORE([$0], [AC_PROG_CPP])dnl -+AC_CHECK_PROG(CC, gcc, gcc) -+if test -z "$CC"; then -+ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) -+ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) -+fi -+ -+AC_PROG_CC_GNU -+ -+if test $ac_cv_prog_gcc = yes; then -+ GCC=yes -+dnl Check whether -g works, even if CFLAGS is set, in case the package -+dnl plays around with CFLAGS (such as to build both debugging and -+dnl normal versions of a library), tasteless as that idea is. -+ ac_test_CFLAGS="${CFLAGS+set}" -+ ac_save_CFLAGS="$CFLAGS" -+ CFLAGS= -+ AC_PROG_CC_G -+ if test "$ac_test_CFLAGS" = set; then -+ CFLAGS="$ac_save_CFLAGS" -+ elif test $ac_cv_prog_cc_g = yes; then -+ CFLAGS="-g -O2" -+ else -+ CFLAGS="-O2" -+ fi -+else -+ GCC= -+ test "${CFLAGS+set}" = set || CFLAGS="-g" -+fi -+]) -+ -+LIB_AC_PROG_CC -+ -+AC_CHECK_TOOL(AS, as) -+AC_CHECK_TOOL(AR, ar) -+AC_CHECK_TOOL(RANLIB, ranlib, :) -+ -+AC_PROG_INSTALL -+ -+AM_MAINTAINER_MODE -+ -+# We need AC_EXEEXT to keep automake happy in cygnus mode. However, -+# at least currently, we never actually build a program, so we never -+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally -+# fails, because we are probably configuring with a cross compiler -+# which can't create executables. So we include AC_EXEEXT to keep -+# automake happy, but we don't execute it, since we don't care about -+# the result. -+if false; then -+ AC_EXEEXT -+fi -+ -+. [$]{newlib_basedir}/configure.host -+ -+newlib_cflags="[$]{newlib_cflags} -fno-builtin" -+ -+NEWLIB_CFLAGS=${newlib_cflags} -+AC_SUBST(NEWLIB_CFLAGS) -+ -+LDFLAGS=${ldflags} -+AC_SUBST(LDFLAGS) -+ -+AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) -+AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) -+AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) -+AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) -+AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) -+ -+AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) -+ -+# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we -+# use oext, which is set in configure.host based on the target platform. -+OBJEXT=${oext} -+ -+AC_SUBST(OBJEXT) -+AC_SUBST(oext) -+AC_SUBST(aext) -+ -+AC_SUBST(libm_machine_dir) -+AC_SUBST(machine_dir) -+AC_SUBST(sys_dir) -+]) -+ -+# Do all the work for Automake. This macro actually does too much -- -+# some checks are only needed if your package does certain things. -+# But this isn't really a big deal. -+ -+# serial 1 -+ -+dnl Usage: -+dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -+ -+AC_DEFUN([AM_INIT_AUTOMAKE], -+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -+AC_REQUIRE([AC_PROG_INSTALL]) -+PACKAGE=[$1] -+AC_SUBST(PACKAGE) -+VERSION=[$2] -+AC_SUBST(VERSION) -+dnl test to see if srcdir already configured -+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then -+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -+fi -+ifelse([$3],, -+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) -+AC_REQUIRE([AM_SANITY_CHECK]) -+AC_REQUIRE([AC_ARG_PROGRAM]) -+dnl FIXME This is truly gross. -+missing_dir=`cd $ac_aux_dir && pwd` -+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) -+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) -+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) -+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) -+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) -+AC_REQUIRE([AC_PROG_MAKE_SET])]) -+ -+# Copyright 2002 Free Software Foundation, Inc. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2, or (at your option) -+# any later version. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+ -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -+ -+# AM_AUTOMAKE_VERSION(VERSION) -+# ---------------------------- -+# Automake X.Y traces this macro to ensure aclocal.m4 has been -+# generated from the m4 files accompanying Automake X.Y. -+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) -+ -+# AM_SET_CURRENT_AUTOMAKE_VERSION -+# ------------------------------- -+# Call AM_AUTOMAKE_VERSION so it can be traced. -+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -+ [AM_AUTOMAKE_VERSION([1.4-p6])]) -+ -+# -+# Check to make sure that the build environment is sane. -+# -+ -+AC_DEFUN([AM_SANITY_CHECK], -+[AC_MSG_CHECKING([whether build environment is sane]) -+# Just in case -+sleep 1 -+echo timestamp > conftestfile -+# Do `set' in a subshell so we don't clobber the current shell's -+# arguments. Must try -L first in case configure is actually a -+# symlink; some systems play weird games with the mod time of symlinks -+# (eg FreeBSD returns the mod time of the symlink's containing -+# directory). -+if ( -+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` -+ if test "[$]*" = "X"; then -+ # -L didn't work. -+ set X `ls -t $srcdir/configure conftestfile` -+ fi -+ if test "[$]*" != "X $srcdir/configure conftestfile" \ -+ && test "[$]*" != "X conftestfile $srcdir/configure"; then -+ -+ # If neither matched, then we have a broken ls. This can happen -+ # if, for instance, CONFIG_SHELL is bash and it inherits a -+ # broken ls alias from the environment. This has actually -+ # happened. Such a system could not be considered "sane". -+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -+alias in your environment]) -+ fi -+ -+ test "[$]2" = conftestfile -+ ) -+then -+ # Ok. -+ : -+else -+ AC_MSG_ERROR([newly created file is older than distributed files! -+Check your system clock]) -+fi -+rm -f conftest* -+AC_MSG_RESULT(yes)]) -+ -+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) -+dnl The program must properly implement --version. -+AC_DEFUN([AM_MISSING_PROG], -+[AC_MSG_CHECKING(for working $2) -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if ($2 --version) < /dev/null > /dev/null 2>&1; then -+ $1=$2 -+ AC_MSG_RESULT(found) -+else -+ $1="$3/missing $2" -+ AC_MSG_RESULT(missing) -+fi -+AC_SUBST($1)]) -+ -+# Define a conditional. -+ -+AC_DEFUN([AM_CONDITIONAL], -+[AC_SUBST($1_TRUE) -+AC_SUBST($1_FALSE) -+if $2; then -+ $1_TRUE= -+ $1_FALSE='#' -+else -+ $1_TRUE='#' -+ $1_FALSE= -+fi]) -+ -+# Add --enable-maintainer-mode option to configure. -+# From Jim Meyering -+ -+# serial 1 -+ -+AC_DEFUN([AM_MAINTAINER_MODE], -+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) -+ dnl maintainer-mode is disabled by default -+ AC_ARG_ENABLE(maintainer-mode, -+[ --enable-maintainer-mode enable make rules and dependencies not useful -+ (and sometimes confusing) to the casual installer], -+ USE_MAINTAINER_MODE=$enableval, -+ USE_MAINTAINER_MODE=no) -+ AC_MSG_RESULT($USE_MAINTAINER_MODE) -+ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) -+ MAINT=$MAINTAINER_MODE_TRUE -+ AC_SUBST(MAINT)dnl -+] -+) -+ -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure newlib-1.17.0-new/newlib/libc/machine/avr32/configure ---- newlib-1.17.0/newlib/libc/machine/avr32/configure 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure 2009-05-22 09:57:49.000000000 +0200 -@@ -0,0 +1,3950 @@ -+#! /bin/sh -+# Guess values for system-dependent variables and create Makefiles. -+# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION. -+# -+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+# This configure script is free software; the Free Software Foundation -+# gives unlimited permission to copy, distribute and modify it. -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename -- "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH -+ -+ -+if test "x$CONFIG_SHELL" = x; then -+ if (eval ":") 2>/dev/null; then -+ as_have_required=yes -+else -+ as_have_required=no -+fi -+ -+ if test $as_have_required = yes && (eval ": -+(as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=\$LINENO -+ as_lineno_2=\$LINENO -+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && -+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -+") 2> /dev/null; then -+ : -+else -+ as_candidate_shells= -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ case $as_dir in -+ /*) -+ for as_base in sh bash ksh sh5; do -+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" -+ done;; -+ esac -+done -+IFS=$as_save_IFS -+ -+ -+ for as_shell in $as_candidate_shells $SHELL; do -+ # Try only shells that exist, to save several forks. -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { ("$as_shell") 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+_ASEOF -+}; then -+ CONFIG_SHELL=$as_shell -+ as_have_required=yes -+ if { "$as_shell" 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+(as_func_return () { -+ (exit $1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = "$1" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test $exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -+ -+_ASEOF -+}; then -+ break -+fi -+ -+fi -+ -+ done -+ -+ if test "x$CONFIG_SHELL" != x; then -+ for as_var in BASH_ENV ENV -+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ done -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ -+ if test $as_have_required = no; then -+ echo This script requires a shell more modern than all the -+ echo shells that I found on your system. Please install a -+ echo modern shell, or manually run the script under such a -+ echo shell if you do have one. -+ { (exit 1); exit 1; } -+fi -+ -+ -+fi -+ -+fi -+ -+ -+ -+(eval "as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0") || { -+ echo No shell found that supports shell functions. -+ echo Please tell autoconf@gnu.org about your system, -+ echo including any error possibly output before this -+ echo message -+} -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | -+ sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno -+ N -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -+ t loop -+ s/-\n.*// -+ ' >$as_me.lineno && -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+ -+exec 7<&0 </dev/null 6>&1 -+ -+# Name of the host. -+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -+# so uname gets run too. -+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -+ -+# -+# Initializations. -+# -+ac_default_prefix=/usr/local -+ac_clean_files= -+ac_config_libobj_dir=. -+LIBOBJS= -+cross_compiling=no -+subdirs= -+MFLAGS= -+MAKEFLAGS= -+SHELL=${CONFIG_SHELL-/bin/sh} -+ -+# Identity of this package. -+PACKAGE_NAME='newlib' -+PACKAGE_TARNAME='newlib' -+PACKAGE_VERSION='NEWLIB_VERSION' -+PACKAGE_STRING='newlib NEWLIB_VERSION' -+PACKAGE_BUGREPORT='' -+ -+ac_unique_file="Makefile.am" -+ac_subst_vars='SHELL -+PATH_SEPARATOR -+PACKAGE_NAME -+PACKAGE_TARNAME -+PACKAGE_VERSION -+PACKAGE_STRING -+PACKAGE_BUGREPORT -+exec_prefix -+prefix -+program_transform_name -+bindir -+sbindir -+libexecdir -+datarootdir -+datadir -+sysconfdir -+sharedstatedir -+localstatedir -+includedir -+oldincludedir -+docdir -+infodir -+htmldir -+dvidir -+pdfdir -+psdir -+libdir -+localedir -+mandir -+DEFS -+ECHO_C -+ECHO_N -+ECHO_T -+LIBS -+build_alias -+host_alias -+target_alias -+MAY_SUPPLY_SYSCALLS_TRUE -+MAY_SUPPLY_SYSCALLS_FALSE -+newlib_basedir -+build -+build_cpu -+build_vendor -+build_os -+host -+host_cpu -+host_vendor -+host_os -+target -+target_cpu -+target_vendor -+target_os -+INSTALL_PROGRAM -+INSTALL_SCRIPT -+INSTALL_DATA -+PACKAGE -+VERSION -+ACLOCAL -+AUTOCONF -+AUTOMAKE -+AUTOHEADER -+MAKEINFO -+SET_MAKE -+CC -+AS -+AR -+RANLIB -+MAINTAINER_MODE_TRUE -+MAINTAINER_MODE_FALSE -+MAINT -+NEWLIB_CFLAGS -+LDFLAGS -+ELIX_LEVEL_0_TRUE -+ELIX_LEVEL_0_FALSE -+ELIX_LEVEL_1_TRUE -+ELIX_LEVEL_1_FALSE -+ELIX_LEVEL_2_TRUE -+ELIX_LEVEL_2_FALSE -+ELIX_LEVEL_3_TRUE -+ELIX_LEVEL_3_FALSE -+ELIX_LEVEL_4_TRUE -+ELIX_LEVEL_4_FALSE -+USE_LIBTOOL_TRUE -+USE_LIBTOOL_FALSE -+OBJEXT -+oext -+aext -+libm_machine_dir -+machine_dir -+sys_dir -+LIBOBJS -+LTLIBOBJS' -+ac_subst_files='' -+ ac_precious_vars='build_alias -+host_alias -+target_alias' -+ -+ -+# Initialize some variables set by options. -+ac_init_help= -+ac_init_version=false -+# The variables have the same names as the options, with -+# dashes changed to underlines. -+cache_file=/dev/null -+exec_prefix=NONE -+no_create= -+no_recursion= -+prefix=NONE -+program_prefix=NONE -+program_suffix=NONE -+program_transform_name=s,x,x, -+silent= -+site= -+srcdir= -+verbose= -+x_includes=NONE -+x_libraries=NONE -+ -+# Installation directory options. -+# These are left unexpanded so users can "make install exec_prefix=/foo" -+# and all the variables that are supposed to be based on exec_prefix -+# by default will actually change. -+# Use braces instead of parens because sh, perl, etc. also accept them. -+# (The list follows the same order as the GNU Coding Standards.) -+bindir='${exec_prefix}/bin' -+sbindir='${exec_prefix}/sbin' -+libexecdir='${exec_prefix}/libexec' -+datarootdir='${prefix}/share' -+datadir='${datarootdir}' -+sysconfdir='${prefix}/etc' -+sharedstatedir='${prefix}/com' -+localstatedir='${prefix}/var' -+includedir='${prefix}/include' -+oldincludedir='/usr/include' -+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -+infodir='${datarootdir}/info' -+htmldir='${docdir}' -+dvidir='${docdir}' -+pdfdir='${docdir}' -+psdir='${docdir}' -+libdir='${exec_prefix}/lib' -+localedir='${datarootdir}/locale' -+mandir='${datarootdir}/man' -+ -+ac_prev= -+ac_dashdash= -+for ac_option -+do -+ # If the previous option needs an argument, assign it. -+ if test -n "$ac_prev"; then -+ eval $ac_prev=\$ac_option -+ ac_prev= -+ continue -+ fi -+ -+ case $ac_option in -+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *) ac_optarg=yes ;; -+ esac -+ -+ # Accept the important Cygnus configure options, so we can diagnose typos. -+ -+ case $ac_dashdash$ac_option in -+ --) -+ ac_dashdash=yes ;; -+ -+ -bindir | --bindir | --bindi | --bind | --bin | --bi) -+ ac_prev=bindir ;; -+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) -+ bindir=$ac_optarg ;; -+ -+ -build | --build | --buil | --bui | --bu) -+ ac_prev=build_alias ;; -+ -build=* | --build=* | --buil=* | --bui=* | --bu=*) -+ build_alias=$ac_optarg ;; -+ -+ -cache-file | --cache-file | --cache-fil | --cache-fi \ -+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) -+ ac_prev=cache_file ;; -+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ -+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) -+ cache_file=$ac_optarg ;; -+ -+ --config-cache | -C) -+ cache_file=config.cache ;; -+ -+ -datadir | --datadir | --datadi | --datad) -+ ac_prev=datadir ;; -+ -datadir=* | --datadir=* | --datadi=* | --datad=*) -+ datadir=$ac_optarg ;; -+ -+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ -+ | --dataroo | --dataro | --datar) -+ ac_prev=datarootdir ;; -+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ -+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) -+ datarootdir=$ac_optarg ;; -+ -+ -disable-* | --disable-*) -+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=no ;; -+ -+ -docdir | --docdir | --docdi | --doc | --do) -+ ac_prev=docdir ;; -+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) -+ docdir=$ac_optarg ;; -+ -+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) -+ ac_prev=dvidir ;; -+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) -+ dvidir=$ac_optarg ;; -+ -+ -enable-* | --enable-*) -+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=\$ac_optarg ;; -+ -+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ -+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -+ | --exec | --exe | --ex) -+ ac_prev=exec_prefix ;; -+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ -+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ -+ | --exec=* | --exe=* | --ex=*) -+ exec_prefix=$ac_optarg ;; -+ -+ -gas | --gas | --ga | --g) -+ # Obsolete; use --with-gas. -+ with_gas=yes ;; -+ -+ -help | --help | --hel | --he | -h) -+ ac_init_help=long ;; -+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) -+ ac_init_help=recursive ;; -+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) -+ ac_init_help=short ;; -+ -+ -host | --host | --hos | --ho) -+ ac_prev=host_alias ;; -+ -host=* | --host=* | --hos=* | --ho=*) -+ host_alias=$ac_optarg ;; -+ -+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) -+ ac_prev=htmldir ;; -+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ -+ | --ht=*) -+ htmldir=$ac_optarg ;; -+ -+ -includedir | --includedir | --includedi | --included | --include \ -+ | --includ | --inclu | --incl | --inc) -+ ac_prev=includedir ;; -+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ -+ | --includ=* | --inclu=* | --incl=* | --inc=*) -+ includedir=$ac_optarg ;; -+ -+ -infodir | --infodir | --infodi | --infod | --info | --inf) -+ ac_prev=infodir ;; -+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) -+ infodir=$ac_optarg ;; -+ -+ -libdir | --libdir | --libdi | --libd) -+ ac_prev=libdir ;; -+ -libdir=* | --libdir=* | --libdi=* | --libd=*) -+ libdir=$ac_optarg ;; -+ -+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ -+ | --libexe | --libex | --libe) -+ ac_prev=libexecdir ;; -+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ -+ | --libexe=* | --libex=* | --libe=*) -+ libexecdir=$ac_optarg ;; -+ -+ -localedir | --localedir | --localedi | --localed | --locale) -+ ac_prev=localedir ;; -+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) -+ localedir=$ac_optarg ;; -+ -+ -localstatedir | --localstatedir | --localstatedi | --localstated \ -+ | --localstate | --localstat | --localsta | --localst | --locals) -+ ac_prev=localstatedir ;; -+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ -+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) -+ localstatedir=$ac_optarg ;; -+ -+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) -+ ac_prev=mandir ;; -+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) -+ mandir=$ac_optarg ;; -+ -+ -nfp | --nfp | --nf) -+ # Obsolete; use --without-fp. -+ with_fp=no ;; -+ -+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ -+ | --no-cr | --no-c | -n) -+ no_create=yes ;; -+ -+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ -+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) -+ no_recursion=yes ;; -+ -+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ -+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ -+ | --oldin | --oldi | --old | --ol | --o) -+ ac_prev=oldincludedir ;; -+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ -+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ -+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) -+ oldincludedir=$ac_optarg ;; -+ -+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) -+ ac_prev=prefix ;; -+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) -+ prefix=$ac_optarg ;; -+ -+ -program-prefix | --program-prefix | --program-prefi | --program-pref \ -+ | --program-pre | --program-pr | --program-p) -+ ac_prev=program_prefix ;; -+ -program-prefix=* | --program-prefix=* | --program-prefi=* \ -+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) -+ program_prefix=$ac_optarg ;; -+ -+ -program-suffix | --program-suffix | --program-suffi | --program-suff \ -+ | --program-suf | --program-su | --program-s) -+ ac_prev=program_suffix ;; -+ -program-suffix=* | --program-suffix=* | --program-suffi=* \ -+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) -+ program_suffix=$ac_optarg ;; -+ -+ -program-transform-name | --program-transform-name \ -+ | --program-transform-nam | --program-transform-na \ -+ | --program-transform-n | --program-transform- \ -+ | --program-transform | --program-transfor \ -+ | --program-transfo | --program-transf \ -+ | --program-trans | --program-tran \ -+ | --progr-tra | --program-tr | --program-t) -+ ac_prev=program_transform_name ;; -+ -program-transform-name=* | --program-transform-name=* \ -+ | --program-transform-nam=* | --program-transform-na=* \ -+ | --program-transform-n=* | --program-transform-=* \ -+ | --program-transform=* | --program-transfor=* \ -+ | --program-transfo=* | --program-transf=* \ -+ | --program-trans=* | --program-tran=* \ -+ | --progr-tra=* | --program-tr=* | --program-t=*) -+ program_transform_name=$ac_optarg ;; -+ -+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) -+ ac_prev=pdfdir ;; -+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) -+ pdfdir=$ac_optarg ;; -+ -+ -psdir | --psdir | --psdi | --psd | --ps) -+ ac_prev=psdir ;; -+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) -+ psdir=$ac_optarg ;; -+ -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil) -+ silent=yes ;; -+ -+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) -+ ac_prev=sbindir ;; -+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ -+ | --sbi=* | --sb=*) -+ sbindir=$ac_optarg ;; -+ -+ -sharedstatedir | --sharedstatedir | --sharedstatedi \ -+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ -+ | --sharedst | --shareds | --shared | --share | --shar \ -+ | --sha | --sh) -+ ac_prev=sharedstatedir ;; -+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ -+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ -+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ -+ | --sha=* | --sh=*) -+ sharedstatedir=$ac_optarg ;; -+ -+ -site | --site | --sit) -+ ac_prev=site ;; -+ -site=* | --site=* | --sit=*) -+ site=$ac_optarg ;; -+ -+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) -+ ac_prev=srcdir ;; -+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) -+ srcdir=$ac_optarg ;; -+ -+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ -+ | --syscon | --sysco | --sysc | --sys | --sy) -+ ac_prev=sysconfdir ;; -+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ -+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) -+ sysconfdir=$ac_optarg ;; -+ -+ -target | --target | --targe | --targ | --tar | --ta | --t) -+ ac_prev=target_alias ;; -+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) -+ target_alias=$ac_optarg ;; -+ -+ -v | -verbose | --verbose | --verbos | --verbo | --verb) -+ verbose=yes ;; -+ -+ -version | --version | --versio | --versi | --vers | -V) -+ ac_init_version=: ;; -+ -+ -with-* | --with-*) -+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=\$ac_optarg ;; -+ -+ -without-* | --without-*) -+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=no ;; -+ -+ --x) -+ # Obsolete; use --with-x. -+ with_x=yes ;; -+ -+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ -+ | --x-incl | --x-inc | --x-in | --x-i) -+ ac_prev=x_includes ;; -+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ -+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) -+ x_includes=$ac_optarg ;; -+ -+ -x-libraries | --x-libraries | --x-librarie | --x-librari \ -+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) -+ ac_prev=x_libraries ;; -+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ -+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) -+ x_libraries=$ac_optarg ;; -+ -+ -*) { echo "$as_me: error: unrecognized option: $ac_option -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } -+ ;; -+ -+ *=*) -+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -+ { (exit 1); exit 1; }; } -+ eval $ac_envvar=\$ac_optarg -+ export $ac_envvar ;; -+ -+ *) -+ # FIXME: should be removed in autoconf 3.0. -+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} -+ ;; -+ -+ esac -+done -+ -+if test -n "$ac_prev"; then -+ ac_option=--`echo $ac_prev | sed 's/_/-/g'` -+ { echo "$as_me: error: missing argument to $ac_option" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ -+# Be sure to have absolute directory names. -+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ -+ datadir sysconfdir sharedstatedir localstatedir includedir \ -+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ -+ libdir localedir mandir -+do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ [\\/$]* | ?:[\\/]* ) continue;; -+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; -+ esac -+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; } -+done -+ -+# There might be people who depend on the old broken behavior: `$host' -+# used to hold the argument of --host etc. -+# FIXME: To remove some day. -+build=$build_alias -+host=$host_alias -+target=$target_alias -+ -+# FIXME: To remove some day. -+if test "x$host_alias" != x; then -+ if test "x$build_alias" = x; then -+ cross_compiling=maybe -+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -+ If a cross compiler is detected then cross compile mode will be used." >&2 -+ elif test "x$build_alias" != "x$host_alias"; then -+ cross_compiling=yes -+ fi -+fi -+ -+ac_tool_prefix= -+test -n "$host_alias" && ac_tool_prefix=$host_alias- -+ -+test "$silent" = yes && exec 6>/dev/null -+ -+ -+ac_pwd=`pwd` && test -n "$ac_pwd" && -+ac_ls_di=`ls -di .` && -+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -+ { echo "$as_me: error: Working directory cannot be determined" >&2 -+ { (exit 1); exit 1; }; } -+test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -+ { echo "$as_me: error: pwd does not report name of working directory" >&2 -+ { (exit 1); exit 1; }; } -+ -+ -+# Find the source files, if location was not specified. -+if test -z "$srcdir"; then -+ ac_srcdir_defaulted=yes -+ # Try the directory containing this script, then the parent directory. -+ ac_confdir=`$as_dirname -- "$0" || -+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$0" : 'X\(//\)[^/]' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$0" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ srcdir=$ac_confdir -+ if test ! -r "$srcdir/$ac_unique_file"; then -+ srcdir=.. -+ fi -+else -+ ac_srcdir_defaulted=no -+fi -+if test ! -r "$srcdir/$ac_unique_file"; then -+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -+ac_abs_confdir=`( -+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 -+ { (exit 1); exit 1; }; } -+ pwd)` -+# When building in place, set srcdir=. -+if test "$ac_abs_confdir" = "$ac_pwd"; then -+ srcdir=. -+fi -+# Remove unnecessary trailing slashes from srcdir. -+# Double slashes in file names in object file debugging info -+# mess up M-x gdb in Emacs. -+case $srcdir in -+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -+esac -+for ac_var in $ac_precious_vars; do -+ eval ac_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_env_${ac_var}_value=\$${ac_var} -+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_cv_env_${ac_var}_value=\$${ac_var} -+done -+ -+# -+# Report the --help message. -+# -+if test "$ac_init_help" = "long"; then -+ # Omit some internal or obsolete options to make the list less imposing. -+ # This message is too long to be a string in the A/UX 3.1 sh. -+ cat <<_ACEOF -+\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems. -+ -+Usage: $0 [OPTION]... [VAR=VALUE]... -+ -+To assign environment variables (e.g., CC, CFLAGS...), specify them as -+VAR=VALUE. See below for descriptions of some of the useful variables. -+ -+Defaults for the options are specified in brackets. -+ -+Configuration: -+ -h, --help display this help and exit -+ --help=short display options specific to this package -+ --help=recursive display the short help of all the included packages -+ -V, --version display version information and exit -+ -q, --quiet, --silent do not print \`checking...' messages -+ --cache-file=FILE cache test results in FILE [disabled] -+ -C, --config-cache alias for \`--cache-file=config.cache' -+ -n, --no-create do not create output files -+ --srcdir=DIR find the sources in DIR [configure dir or \`..'] -+ -+Installation directories: -+ --prefix=PREFIX install architecture-independent files in PREFIX -+ [$ac_default_prefix] -+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -+ [PREFIX] -+ -+By default, \`make install' will install all the files in -+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -+an installation prefix other than \`$ac_default_prefix' using \`--prefix', -+for instance \`--prefix=\$HOME'. -+ -+For better control, use the options below. -+ -+Fine tuning of the installation directories: -+ --bindir=DIR user executables [EPREFIX/bin] -+ --sbindir=DIR system admin executables [EPREFIX/sbin] -+ --libexecdir=DIR program executables [EPREFIX/libexec] -+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data [PREFIX/var] -+ --libdir=DIR object code libraries [EPREFIX/lib] -+ --includedir=DIR C header files [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc [/usr/include] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] -+_ACEOF -+ -+ cat <<\_ACEOF -+ -+Program names: -+ --program-prefix=PREFIX prepend PREFIX to installed program names -+ --program-suffix=SUFFIX append SUFFIX to installed program names -+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names -+ -+System types: -+ --build=BUILD configure for building on BUILD [guessed] -+ --host=HOST cross-compile to build programs to run on HOST [BUILD] -+ --target=TARGET configure for building compilers for TARGET [HOST] -+_ACEOF -+fi -+ -+if test -n "$ac_init_help"; then -+ case $ac_init_help in -+ short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";; -+ esac -+ cat <<\_ACEOF -+ -+Optional Features: -+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) -+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] -+ --enable-multilib build many library versions (default) -+ --enable-target-optspace optimize for space -+ --enable-malloc-debugging indicate malloc debugging requested -+ --enable-newlib-mb enable multibyte support -+ --enable-newlib-iconv enable iconv library support -+ --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in -+ --enable-newlib-multithread enable support for multiple threads -+ --enable-newlib-elix-level supply desired elix library level (1-4) -+ --disable-newlib-io-float disable printf/scanf family float support -+ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls -+ --enable-maintainer-mode enable make rules and dependencies not useful -+ (and sometimes confusing) to the casual installer -+ -+_ACEOF -+ac_status=$? -+fi -+ -+if test "$ac_init_help" = "recursive"; then -+ # If there are subdirs, report their specific --help. -+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -+ test -d "$ac_dir" || continue -+ ac_builddir=. -+ -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix -+ -+case $srcdir in -+ .) # We are building in place. -+ ac_srcdir=. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -+ -+ cd "$ac_dir" || { ac_status=$?; continue; } -+ # Check for guested configure. -+ if test -f "$ac_srcdir/configure.gnu"; then -+ echo && -+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive -+ elif test -f "$ac_srcdir/configure"; then -+ echo && -+ $SHELL "$ac_srcdir/configure" --help=recursive -+ else -+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -+ fi || ac_status=$? -+ cd "$ac_pwd" || { ac_status=$?; break; } -+ done -+fi -+ -+test -n "$ac_init_help" && exit $ac_status -+if $ac_init_version; then -+ cat <<\_ACEOF -+newlib configure NEWLIB_VERSION -+generated by GNU Autoconf 2.61 -+ -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+This configure script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it. -+_ACEOF -+ exit -+fi -+cat >config.log <<_ACEOF -+This file contains any messages produced by compilers while -+running configure, to aid debugging if configure makes a mistake. -+ -+It was created by newlib $as_me NEWLIB_VERSION, which was -+generated by GNU Autoconf 2.61. Invocation command line was -+ -+ $ $0 $@ -+ -+_ACEOF -+exec 5>>config.log -+{ -+cat <<_ASUNAME -+## --------- ## -+## Platform. ## -+## --------- ## -+ -+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -+uname -m = `(uname -m) 2>/dev/null || echo unknown` -+uname -r = `(uname -r) 2>/dev/null || echo unknown` -+uname -s = `(uname -s) 2>/dev/null || echo unknown` -+uname -v = `(uname -v) 2>/dev/null || echo unknown` -+ -+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` -+ -+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -+ -+_ASUNAME -+ -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ echo "PATH: $as_dir" -+done -+IFS=$as_save_IFS -+ -+} >&5 -+ -+cat >&5 <<_ACEOF -+ -+ -+## ----------- ## -+## Core tests. ## -+## ----------- ## -+ -+_ACEOF -+ -+ -+# Keep a trace of the command line. -+# Strip out --no-create and --no-recursion so they do not pile up. -+# Strip out --silent because we don't want to record it for future runs. -+# Also quote any args containing shell meta-characters. -+# Make two passes to allow for proper duplicate-argument suppression. -+ac_configure_args= -+ac_configure_args0= -+ac_configure_args1= -+ac_must_keep_next=false -+for ac_pass in 1 2 -+do -+ for ac_arg -+ do -+ case $ac_arg in -+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil) -+ continue ;; -+ *\'*) -+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ esac -+ case $ac_pass in -+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; -+ 2) -+ ac_configure_args1="$ac_configure_args1 '$ac_arg'" -+ if test $ac_must_keep_next = true; then -+ ac_must_keep_next=false # Got value, back to normal. -+ else -+ case $ac_arg in -+ *=* | --config-cache | -C | -disable-* | --disable-* \ -+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ -+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ -+ | -with-* | --with-* | -without-* | --without-* | --x) -+ case "$ac_configure_args0 " in -+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; -+ esac -+ ;; -+ -* ) ac_must_keep_next=true ;; -+ esac -+ fi -+ ac_configure_args="$ac_configure_args '$ac_arg'" -+ ;; -+ esac -+ done -+done -+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } -+ -+# When interrupted or exit'd, cleanup temporary files, and complete -+# config.log. We remove comments because anyway the quotes in there -+# would cause problems or look ugly. -+# WARNING: Use '\'' to represent an apostrophe within the trap. -+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -+trap 'exit_status=$? -+ # Save into config.log some information that might help in debugging. -+ { -+ echo -+ -+ cat <<\_ASBOX -+## ---------------- ## -+## Cache variables. ## -+## ---------------- ## -+_ASBOX -+ echo -+ # The following way of writing the cache mishandles newlines in values, -+( -+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ (set) 2>&1 | -+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) -+ sed -n \ -+ "s/'\''/'\''\\\\'\'''\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" -+ ;; #( -+ *) -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" -+ ;; -+ esac | -+ sort -+) -+ echo -+ -+ cat <<\_ASBOX -+## ----------------- ## -+## Output variables. ## -+## ----------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_vars -+ do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" -+ done | sort -+ echo -+ -+ if test -n "$ac_subst_files"; then -+ cat <<\_ASBOX -+## ------------------- ## -+## File substitutions. ## -+## ------------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_files -+ do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" -+ done | sort -+ echo -+ fi -+ -+ if test -s confdefs.h; then -+ cat <<\_ASBOX -+## ----------- ## -+## confdefs.h. ## -+## ----------- ## -+_ASBOX -+ echo -+ cat confdefs.h -+ echo -+ fi -+ test "$ac_signal" != 0 && -+ echo "$as_me: caught signal $ac_signal" -+ echo "$as_me: exit $exit_status" -+ } >&5 -+ rm -f core *.core core.conftest.* && -+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && -+ exit $exit_status -+' 0 -+for ac_signal in 1 2 13 15; do -+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -+done -+ac_signal=0 -+ -+# confdefs.h avoids OS command line length limits that DEFS can exceed. -+rm -f -r conftest* confdefs.h -+ -+# Predefined preprocessor variables. -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_NAME "$PACKAGE_NAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_VERSION "$PACKAGE_VERSION" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_STRING "$PACKAGE_STRING" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -+_ACEOF -+ -+ -+# Let the site file select an alternate cache file if it wants to. -+# Prefer explicitly selected file to automatically selected ones. -+if test -n "$CONFIG_SITE"; then -+ set x "$CONFIG_SITE" -+elif test "x$prefix" != xNONE; then -+ set x "$prefix/share/config.site" "$prefix/etc/config.site" -+else -+ set x "$ac_default_prefix/share/config.site" \ -+ "$ac_default_prefix/etc/config.site" -+fi -+shift -+for ac_site_file -+do -+ if test -r "$ac_site_file"; then -+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -+echo "$as_me: loading site script $ac_site_file" >&6;} -+ sed 's/^/| /' "$ac_site_file" >&5 -+ . "$ac_site_file" -+ fi -+done -+ -+if test -r "$cache_file"; then -+ # Some versions of bash will fail to source /dev/null (special -+ # files actually), so we avoid doing that. -+ if test -f "$cache_file"; then -+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -+echo "$as_me: loading cache $cache_file" >&6;} -+ case $cache_file in -+ [\\/]* | ?:[\\/]* ) . "$cache_file";; -+ *) . "./$cache_file";; -+ esac -+ fi -+else -+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -+echo "$as_me: creating cache $cache_file" >&6;} -+ >$cache_file -+fi -+ -+# Check that the precious variables saved in the cache have kept the same -+# value. -+ac_cache_corrupted=false -+for ac_var in $ac_precious_vars; do -+ eval ac_old_set=\$ac_cv_env_${ac_var}_set -+ eval ac_new_set=\$ac_env_${ac_var}_set -+ eval ac_old_val=\$ac_cv_env_${ac_var}_value -+ eval ac_new_val=\$ac_env_${ac_var}_value -+ case $ac_old_set,$ac_new_set in -+ set,) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,set) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,);; -+ *) -+ if test "x$ac_old_val" != "x$ac_new_val"; then -+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -+echo "$as_me: former value: $ac_old_val" >&2;} -+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -+echo "$as_me: current value: $ac_new_val" >&2;} -+ ac_cache_corrupted=: -+ fi;; -+ esac -+ # Pass precious variables to config.status. -+ if test "$ac_new_set" = set; then -+ case $ac_new_val in -+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *) ac_arg=$ac_var=$ac_new_val ;; -+ esac -+ case " $ac_configure_args " in -+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. -+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; -+ esac -+ fi -+done -+if $ac_cache_corrupted; then -+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -+echo "$as_me: error: changes in the environment can compromise the build" >&2;} -+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+ -+ -+ -+ac_aux_dir= -+for ac_dir in ../../../.. "$srcdir"/../../../..; do -+ if test -f "$ac_dir/install-sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install-sh -c" -+ break -+ elif test -f "$ac_dir/install.sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install.sh -c" -+ break -+ elif test -f "$ac_dir/shtool"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/shtool install -c" -+ break -+ fi -+done -+if test -z "$ac_aux_dir"; then -+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5 -+echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+# These three variables are undocumented and unsupported, -+# and are intended to be withdrawn in a future Autoconf release. -+# They can cause serious problems if a builder's source tree is in a directory -+# whose full name contains unusual characters. -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -+ -+ -+ -+# Make sure we can run config.sub. -+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} -+ { (exit 1); exit 1; }; } -+ -+{ echo "$as_me:$LINENO: checking build system type" >&5 -+echo $ECHO_N "checking build system type... $ECHO_C" >&6; } -+if test "${ac_cv_build+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_build_alias=$build_alias -+test "x$ac_build_alias" = x && -+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -+test "x$ac_build_alias" = x && -+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -+echo "$as_me: error: cannot guess build type; you must specify one" >&2;} -+ { (exit 1); exit 1; }; } -+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -+echo "${ECHO_T}$ac_cv_build" >&6; } -+case $ac_cv_build in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -+echo "$as_me: error: invalid value of canonical build" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+build=$ac_cv_build -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_build -+shift -+build_cpu=$1 -+build_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+build_os=$* -+IFS=$ac_save_IFS -+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -+ -+ -+{ echo "$as_me:$LINENO: checking host system type" >&5 -+echo $ECHO_N "checking host system type... $ECHO_C" >&6; } -+if test "${ac_cv_host+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test "x$host_alias" = x; then -+ ac_cv_host=$ac_cv_build -+else -+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -+echo "${ECHO_T}$ac_cv_host" >&6; } -+case $ac_cv_host in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -+echo "$as_me: error: invalid value of canonical host" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+host=$ac_cv_host -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_host -+shift -+host_cpu=$1 -+host_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+host_os=$* -+IFS=$ac_save_IFS -+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -+ -+ -+am__api_version="1.4" -+# Find a good install program. We prefer a C program (faster), -+# so one script is as good as another. But avoid the broken or -+# incompatible versions: -+# SysV /etc/install, /usr/sbin/install -+# SunOS /usr/etc/install -+# IRIX /sbin/install -+# AIX /bin/install -+# AmigaOS /C/install, which installs bootblocks on floppy discs -+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -+# AFS /usr/afsws/bin/install, which mishandles nonexistent args -+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -+# OS/2's system install, which has a completely different semantic -+# ./install, which can be erroneously created by make from ./install.sh. -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -+if test -z "$INSTALL"; then -+if test "${ac_cv_path_install+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in -+ ./ | .// | /cC/* | \ -+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ /usr/ucb/* ) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then -+ if test $ac_prog = install && -+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # AIX install. It has an incompatible calling convention. -+ : -+ elif test $ac_prog = install && -+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # program-specific install script used by HP pwplus--don't use. -+ : -+ else -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi -+ fi -+ done -+ done -+ ;; -+esac -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ if test "${ac_cv_path_install+set}" = set; then -+ INSTALL=$ac_cv_path_install -+ else -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will -+ # break other packages using the cache if that directory is -+ # removed, or if the value is a relative name. -+ INSTALL=$ac_install_sh -+ fi -+fi -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } -+ -+# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -+# It thinks the first close brace ends the variable substitution. -+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -+ -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' -+ -+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -+ -+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } -+# Just in case -+sleep 1 -+echo timestamp > conftestfile -+# Do `set' in a subshell so we don't clobber the current shell's -+# arguments. Must try -L first in case configure is actually a -+# symlink; some systems play weird games with the mod time of symlinks -+# (eg FreeBSD returns the mod time of the symlink's containing -+# directory). -+if ( -+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` -+ if test "$*" = "X"; then -+ # -L didn't work. -+ set X `ls -t $srcdir/configure conftestfile` -+ fi -+ if test "$*" != "X $srcdir/configure conftestfile" \ -+ && test "$*" != "X conftestfile $srcdir/configure"; then -+ -+ # If neither matched, then we have a broken ls. This can happen -+ # if, for instance, CONFIG_SHELL is bash and it inherits a -+ # broken ls alias from the environment. This has actually -+ # happened. Such a system could not be considered "sane". -+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -+alias in your environment" >&5 -+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -+alias in your environment" >&2;} -+ { (exit 1); exit 1; }; } -+ fi -+ -+ test "$2" = conftestfile -+ ) -+then -+ # Ok. -+ : -+else -+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -+Check your system clock" >&5 -+echo "$as_me: error: newly created file is older than distributed files! -+Check your system clock" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+rm -f conftest* -+{ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } -+test "$program_prefix" != NONE && -+ program_transform_name="s&^&$program_prefix&;$program_transform_name" -+# Use a double $ so make ignores it. -+test "$program_suffix" != NONE && -+ program_transform_name="s&\$&$program_suffix&;$program_transform_name" -+# Double any \ or $. echo might interpret backslashes. -+# By default was `s,x,x', remove it if useless. -+cat <<\_ACEOF >conftest.sed -+s/[\\$]/&&/g;s/;s,x,x,$// -+_ACEOF -+program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -+rm -f conftest.sed -+ -+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.make <<\_ACEOF -+SHELL = /bin/sh -+all: -+ @echo '@@@%%%=$(MAKE)=@@@%%%' -+_ACEOF -+# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -+case `${MAKE-make} -f conftest.make 2>/dev/null` in -+ *@@@%%%=?*=@@@%%%*) -+ eval ac_cv_prog_make_${ac_make}_set=yes;; -+ *) -+ eval ac_cv_prog_make_${ac_make}_set=no;; -+esac -+rm -f conftest.make -+fi -+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } -+ SET_MAKE= -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+ SET_MAKE="MAKE=${MAKE-make}" -+fi -+ -+ -+# Check whether --enable-multilib was given. -+if test "${enable_multilib+set}" = set; then -+ enableval=$enable_multilib; case "${enableval}" in -+ yes) multilib=yes ;; -+ no) multilib=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 -+echo "$as_me: error: bad value ${enableval} for multilib option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ multilib=yes -+fi -+ -+# Check whether --enable-target-optspace was given. -+if test "${enable_target_optspace+set}" = set; then -+ enableval=$enable_target_optspace; case "${enableval}" in -+ yes) target_optspace=yes ;; -+ no) target_optspace=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 -+echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ target_optspace= -+fi -+ -+# Check whether --enable-malloc-debugging was given. -+if test "${enable_malloc_debugging+set}" = set; then -+ enableval=$enable_malloc_debugging; case "${enableval}" in -+ yes) malloc_debugging=yes ;; -+ no) malloc_debugging=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 -+echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ malloc_debugging= -+fi -+ -+# Check whether --enable-newlib-mb was given. -+if test "${enable_newlib_mb+set}" = set; then -+ enableval=$enable_newlib_mb; case "${enableval}" in -+ yes) newlib_mb=yes ;; -+ no) newlib_mb=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-mb option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-mb option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_mb= -+fi -+ -+# Check whether --enable-newlib-iconv was given. -+if test "${enable_newlib_iconv+set}" = set; then -+ enableval=$enable_newlib_iconv; case "${enableval}" in -+ yes) newlib_iconv=yes ;; -+ no) newlib_iconv=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_iconv= -+fi -+ -+# Check whether --enable-newlib-builtin-converters was given. -+if test "${enable_newlib_builtin_converters+set}" = set; then -+ enableval=$enable_newlib_builtin_converters; if test x${enableval} = x; then -+ { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&2;} -+ { (exit 1); exit 1; }; } -+ fi -+ builtin_converters=${enableval} -+ -+else -+ builtin_converters= -+fi -+ -+# Check whether --enable-newlib-multithread was given. -+if test "${enable_newlib_multithread+set}" = set; then -+ enableval=$enable_newlib_multithread; case "${enableval}" in -+ yes) newlib_multithread=yes ;; -+ no) newlib_multithread=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_multithread=yes -+fi -+ -+# Check whether --enable-newlib-elix-level was given. -+if test "${enable_newlib_elix_level+set}" = set; then -+ enableval=$enable_newlib_elix_level; case "${enableval}" in -+ 0) newlib_elix_level=0 ;; -+ 1) newlib_elix_level=1 ;; -+ 2) newlib_elix_level=2 ;; -+ 3) newlib_elix_level=3 ;; -+ 4) newlib_elix_level=4 ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_elix_level=0 -+fi -+ -+# Check whether --enable-newlib-io-float was given. -+if test "${enable_newlib_io_float+set}" = set; then -+ enableval=$enable_newlib_io_float; case "${enableval}" in -+ yes) newlib_io_float=yes ;; -+ no) newlib_io_float=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_io_float=yes -+fi -+ -+# Check whether --enable-newlib-supplied-syscalls was given. -+if test "${enable_newlib_supplied_syscalls+set}" = set; then -+ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in -+ yes) newlib_may_supply_syscalls=yes ;; -+ no) newlib_may_supply_syscalls=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_may_supply_syscalls=yes -+fi -+ -+ -+ -+if test x${newlib_may_supply_syscalls} = xyes; then -+ MAY_SUPPLY_SYSCALLS_TRUE= -+ MAY_SUPPLY_SYSCALLS_FALSE='#' -+else -+ MAY_SUPPLY_SYSCALLS_TRUE='#' -+ MAY_SUPPLY_SYSCALLS_FALSE= -+fi -+ -+ -+test -z "${with_target_subdir}" && with_target_subdir=. -+ -+if test "${srcdir}" = "."; then -+ if test "${with_target_subdir}" != "."; then -+ newlib_basedir="${srcdir}/${with_multisrctop}../../../.." -+ else -+ newlib_basedir="${srcdir}/${with_multisrctop}../../.." -+ fi -+else -+ newlib_basedir="${srcdir}/../../.." -+fi -+ -+ -+{ echo "$as_me:$LINENO: checking target system type" >&5 -+echo $ECHO_N "checking target system type... $ECHO_C" >&6; } -+if test "${ac_cv_target+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test "x$target_alias" = x; then -+ ac_cv_target=$ac_cv_host -+else -+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 -+echo "${ECHO_T}$ac_cv_target" >&6; } -+case $ac_cv_target in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 -+echo "$as_me: error: invalid value of canonical target" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+target=$ac_cv_target -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_target -+shift -+target_cpu=$1 -+target_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+target_os=$* -+IFS=$ac_save_IFS -+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac -+ -+ -+# The aliases save the names the user supplied, while $host etc. -+# will get canonicalized. -+test -n "$target_alias" && -+ test "$program_prefix$program_suffix$program_transform_name" = \ -+ NONENONEs,x,x, && -+ program_prefix=${target_alias}- -+ -+ -+PACKAGE=newlib -+ -+VERSION=1.12.0 -+ -+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then -+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE "$PACKAGE" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define VERSION "$VERSION" -+_ACEOF -+ -+ -+ -+missing_dir=`cd $ac_aux_dir && pwd` -+{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 -+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then -+ ACLOCAL=aclocal-${am__api_version} -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working autoconf" >&5 -+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (autoconf --version) < /dev/null > /dev/null 2>&1; then -+ AUTOCONF=autoconf -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ AUTOCONF="$missing_dir/missing autoconf" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 -+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then -+ AUTOMAKE=automake-${am__api_version} -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ AUTOMAKE="$missing_dir/missing automake-${am__api_version}" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working autoheader" >&5 -+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (autoheader --version) < /dev/null > /dev/null 2>&1; then -+ AUTOHEADER=autoheader -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ AUTOHEADER="$missing_dir/missing autoheader" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working makeinfo" >&5 -+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then -+ MAKEINFO=makeinfo -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ MAKEINFO="$missing_dir/missing makeinfo" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+ -+ -+# FIXME: We temporarily define our own version of AC_PROG_CC. This is -+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -+# are probably using a cross compiler, which will not be able to fully -+# link an executable. This should really be fixed in autoconf -+# itself. -+ -+ -+ -+# Extract the first word of "gcc", so it can be a program name with args. -+set dummy gcc; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_CC="gcc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+CC=$ac_cv_prog_CC -+if test -n "$CC"; then -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+if test -z "$CC"; then -+ # Extract the first word of "cc", so it can be a program name with args. -+set dummy cc; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. -+else -+ ac_prog_rejected=no -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -+ ac_prog_rejected=yes -+ continue -+ fi -+ ac_cv_prog_CC="cc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+if test $ac_prog_rejected = yes; then -+ # We found a bogon in the path, so make sure we never use it. -+ set dummy $ac_cv_prog_CC -+ shift -+ if test $# != 0; then -+ # We chose a different compiler from the bogus one. -+ # However, it has the same basename, so the bogon will be chosen -+ # first if we set CC to just the basename; use the full file name. -+ shift -+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" -+ fi -+fi -+fi -+fi -+CC=$ac_cv_prog_CC -+if test -n "$CC"; then -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+ test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 -+echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+#AC_PROG_CC_GNU -+ -+if test $ac_cv_c_compiler_gnu = yes; then -+ GCC=yes -+ ac_test_CFLAGS="${CFLAGS+set}" -+ ac_save_CFLAGS="$CFLAGS" -+ CFLAGS= -+# AC_PROG_CC_G -+ if test "$ac_test_CFLAGS" = set; then -+ CFLAGS="$ac_save_CFLAGS" -+ elif test $ac_cv_prog_cc_g = yes; then -+ CFLAGS="-g -O2" -+ else -+ CFLAGS="-O2" -+ fi -+else -+ GCC= -+ test "${CFLAGS+set}" = set || CFLAGS="-g" -+fi -+ -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -+set dummy ${ac_tool_prefix}as; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_AS+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$AS"; then -+ ac_cv_prog_AS="$AS" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_AS="${ac_tool_prefix}as" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+AS=$ac_cv_prog_AS -+if test -n "$AS"; then -+ { echo "$as_me:$LINENO: result: $AS" >&5 -+echo "${ECHO_T}$AS" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_AS"; then -+ ac_ct_AS=$AS -+ # Extract the first word of "as", so it can be a program name with args. -+set dummy as; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_AS"; then -+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_AS="as" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_AS=$ac_cv_prog_ac_ct_AS -+if test -n "$ac_ct_AS"; then -+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -+echo "${ECHO_T}$ac_ct_AS" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ if test "x$ac_ct_AS" = x; then -+ AS="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AS=$ac_ct_AS -+ fi -+else -+ AS="$ac_cv_prog_AS" -+fi -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -+set dummy ${ac_tool_prefix}ar; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_AR+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$AR"; then -+ ac_cv_prog_AR="$AR" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_AR="${ac_tool_prefix}ar" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+AR=$ac_cv_prog_AR -+if test -n "$AR"; then -+ { echo "$as_me:$LINENO: result: $AR" >&5 -+echo "${ECHO_T}$AR" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_AR"; then -+ ac_ct_AR=$AR -+ # Extract the first word of "ar", so it can be a program name with args. -+set dummy ar; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_AR"; then -+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_AR="ar" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_AR=$ac_cv_prog_ac_ct_AR -+if test -n "$ac_ct_AR"; then -+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -+echo "${ECHO_T}$ac_ct_AR" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ if test "x$ac_ct_AR" = x; then -+ AR="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AR=$ac_ct_AR -+ fi -+else -+ AR="$ac_cv_prog_AR" -+fi -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -+set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_RANLIB+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$RANLIB"; then -+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+RANLIB=$ac_cv_prog_RANLIB -+if test -n "$RANLIB"; then -+ { echo "$as_me:$LINENO: result: $RANLIB" >&5 -+echo "${ECHO_T}$RANLIB" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_RANLIB"; then -+ ac_ct_RANLIB=$RANLIB -+ # Extract the first word of "ranlib", so it can be a program name with args. -+set dummy ranlib; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_RANLIB"; then -+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_RANLIB="ranlib" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -+if test -n "$ac_ct_RANLIB"; then -+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -+echo "${ECHO_T}$ac_ct_RANLIB" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ if test "x$ac_ct_RANLIB" = x; then -+ RANLIB=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ RANLIB=$ac_ct_RANLIB -+ fi -+else -+ RANLIB="$ac_cv_prog_RANLIB" -+fi -+ -+ -+# Find a good install program. We prefer a C program (faster), -+# so one script is as good as another. But avoid the broken or -+# incompatible versions: -+# SysV /etc/install, /usr/sbin/install -+# SunOS /usr/etc/install -+# IRIX /sbin/install -+# AIX /bin/install -+# AmigaOS /C/install, which installs bootblocks on floppy discs -+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -+# AFS /usr/afsws/bin/install, which mishandles nonexistent args -+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -+# OS/2's system install, which has a completely different semantic -+# ./install, which can be erroneously created by make from ./install.sh. -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -+if test -z "$INSTALL"; then -+if test "${ac_cv_path_install+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in -+ ./ | .// | /cC/* | \ -+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ /usr/ucb/* ) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then -+ if test $ac_prog = install && -+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # AIX install. It has an incompatible calling convention. -+ : -+ elif test $ac_prog = install && -+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # program-specific install script used by HP pwplus--don't use. -+ : -+ else -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi -+ fi -+ done -+ done -+ ;; -+esac -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ if test "${ac_cv_path_install+set}" = set; then -+ INSTALL=$ac_cv_path_install -+ else -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will -+ # break other packages using the cache if that directory is -+ # removed, or if the value is a relative name. -+ INSTALL=$ac_install_sh -+ fi -+fi -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } -+ -+# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -+# It thinks the first close brace ends the variable substitution. -+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -+ -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' -+ -+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -+ -+ -+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } -+ # Check whether --enable-maintainer-mode was given. -+if test "${enable_maintainer_mode+set}" = set; then -+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -+else -+ USE_MAINTAINER_MODE=no -+fi -+ -+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } -+ -+ -+if test $USE_MAINTAINER_MODE = yes; then -+ MAINTAINER_MODE_TRUE= -+ MAINTAINER_MODE_FALSE='#' -+else -+ MAINTAINER_MODE_TRUE='#' -+ MAINTAINER_MODE_FALSE= -+fi -+ MAINT=$MAINTAINER_MODE_TRUE -+ -+ -+ -+# We need AC_EXEEXT to keep automake happy in cygnus mode. However, -+# at least currently, we never actually build a program, so we never -+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally -+# fails, because we are probably configuring with a cross compiler -+# which can't create executables. So we include AC_EXEEXT to keep -+# automake happy, but we don't execute it, since we don't care about -+# the result. -+#if false; then -+# -+#fi -+ -+. ${newlib_basedir}/configure.host -+ -+newlib_cflags="${newlib_cflags} -fno-builtin" -+ -+NEWLIB_CFLAGS=${newlib_cflags} -+ -+ -+LDFLAGS=${ldflags} -+ -+ -+ -+ -+if test x${newlib_elix_level} = x0; then -+ ELIX_LEVEL_0_TRUE= -+ ELIX_LEVEL_0_FALSE='#' -+else -+ ELIX_LEVEL_0_TRUE='#' -+ ELIX_LEVEL_0_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x1; then -+ ELIX_LEVEL_1_TRUE= -+ ELIX_LEVEL_1_FALSE='#' -+else -+ ELIX_LEVEL_1_TRUE='#' -+ ELIX_LEVEL_1_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x2; then -+ ELIX_LEVEL_2_TRUE= -+ ELIX_LEVEL_2_FALSE='#' -+else -+ ELIX_LEVEL_2_TRUE='#' -+ ELIX_LEVEL_2_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x3; then -+ ELIX_LEVEL_3_TRUE= -+ ELIX_LEVEL_3_FALSE='#' -+else -+ ELIX_LEVEL_3_TRUE='#' -+ ELIX_LEVEL_3_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x4; then -+ ELIX_LEVEL_4_TRUE= -+ ELIX_LEVEL_4_FALSE='#' -+else -+ ELIX_LEVEL_4_TRUE='#' -+ ELIX_LEVEL_4_FALSE= -+fi -+ -+ -+ -+if test x${use_libtool} = xyes; then -+ USE_LIBTOOL_TRUE= -+ USE_LIBTOOL_FALSE='#' -+else -+ USE_LIBTOOL_TRUE='#' -+ USE_LIBTOOL_FALSE= -+fi -+ -+# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we -+# use oext, which is set in configure.host based on the target platform. -+OBJEXT=${oext} -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ac_config_files="$ac_config_files Makefile" -+ -+cat >confcache <<\_ACEOF -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs, see configure's option --config-cache. -+# It is not useful on other systems. If it contains results you don't -+# want to keep, you may remove or edit it. -+# -+# config.status only pays attention to the cache file if you give it -+# the --recheck option to rerun configure. -+# -+# `ac_cv_env_foo' variables (set or unset) will be overridden when -+# loading this file, other *unset* `ac_cv_foo' will be assigned the -+# following values. -+ -+_ACEOF -+ -+# The following way of writing the cache mishandles newlines in values, -+# but we know of no workaround that is simple, portable, and efficient. -+# So, we kill variables containing newlines. -+# Ultrix sh set writes to stderr and can't be redirected directly, -+# and sets the high bit in the cache file unless we assign to the vars. -+( -+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ -+ (set) 2>&1 | -+ case $as_nl`(ac_space=' '; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) -+ # `set' does not quote correctly, so add quotes (double-quote -+ # substitution turns \\\\ into \\, and sed turns \\ into \). -+ sed -n \ -+ "s/'/'\\\\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -+ ;; #( -+ *) -+ # `set' quotes correctly as required by POSIX, so do not add quotes. -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" -+ ;; -+ esac | -+ sort -+) | -+ sed ' -+ /^ac_cv_env_/b end -+ t clear -+ :clear -+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ -+ t end -+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -+ :end' >>confcache -+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else -+ if test -w "$cache_file"; then -+ test "x$cache_file" != "x/dev/null" && -+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -+echo "$as_me: updating cache $cache_file" >&6;} -+ cat confcache >$cache_file -+ else -+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -+echo "$as_me: not updating unwritable cache $cache_file" >&6;} -+ fi -+fi -+rm -f confcache -+ -+test "x$prefix" = xNONE && prefix=$ac_default_prefix -+# Let make expand exec_prefix. -+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -+ -+# Transform confdefs.h into DEFS. -+# Protect against shell expansion while executing Makefile rules. -+# Protect against Makefile macro expansion. -+# -+# If the first sed substitution is executed (which looks for macros that -+# take arguments), then branch to the quote section. Otherwise, -+# look for a macro that doesn't take arguments. -+ac_script=' -+t clear -+:clear -+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g -+t quote -+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g -+t quote -+b any -+:quote -+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -+s/\[/\\&/g -+s/\]/\\&/g -+s/\$/$$/g -+H -+:any -+${ -+ g -+ s/^\n// -+ s/\n/ /g -+ p -+} -+' -+DEFS=`sed -n "$ac_script" confdefs.h` -+ -+ -+ac_libobjs= -+ac_ltlibobjs= -+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue -+ # 1. Remove the extension, and $U if already installed. -+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -+ ac_i=`echo "$ac_i" | sed "$ac_script"` -+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR -+ # will be set to the directory where LIBOBJS objects are built. -+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" -+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -+done -+LIBOBJS=$ac_libobjs -+ -+LTLIBOBJS=$ac_ltlibobjs -+ -+ -+ -+: ${CONFIG_STATUS=./config.status} -+ac_clean_files_save=$ac_clean_files -+ac_clean_files="$ac_clean_files $CONFIG_STATUS" -+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -+echo "$as_me: creating $CONFIG_STATUS" >&6;} -+cat >$CONFIG_STATUS <<_ACEOF -+#! $SHELL -+# Generated by $as_me. -+# Run this file to recreate the current configuration. -+# Compiler output produced by configure, useful for debugging -+# configure, is in config.log if it exists. -+ -+debug=false -+ac_cs_recheck=false -+ac_cs_silent=false -+SHELL=\${CONFIG_SHELL-$SHELL} -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename -- "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | -+ sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno -+ N -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -+ t loop -+ s/-\n.*// -+ ' >$as_me.lineno && -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+exec 6>&1 -+ -+# Save the log message, to keep $[0] and so on meaningful, and to -+# report actual input values of CONFIG_FILES etc. instead of their -+# values after options handling. -+ac_log=" -+This file was extended by newlib $as_me NEWLIB_VERSION, which was -+generated by GNU Autoconf 2.61. Invocation command line was -+ -+ CONFIG_FILES = $CONFIG_FILES -+ CONFIG_HEADERS = $CONFIG_HEADERS -+ CONFIG_LINKS = $CONFIG_LINKS -+ CONFIG_COMMANDS = $CONFIG_COMMANDS -+ $ $0 $@ -+ -+on `(hostname || uname -n) 2>/dev/null | sed 1q` -+" -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+# Files that config.status was made for. -+config_files="$ac_config_files" -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ac_cs_usage="\ -+\`$as_me' instantiates files from templates according to the -+current configuration. -+ -+Usage: $0 [OPTIONS] [FILE]... -+ -+ -h, --help print this help, then exit -+ -V, --version print version number and configuration settings, then exit -+ -q, --quiet do not print progress messages -+ -d, --debug don't remove temporary files -+ --recheck update $as_me by reconfiguring in the same conditions -+ --file=FILE[:TEMPLATE] -+ instantiate the configuration file FILE -+ -+Configuration files: -+$config_files -+ -+Report bugs to <bug-autoconf@gnu.org>." -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ac_cs_version="\\ -+newlib config.status NEWLIB_VERSION -+configured by $0, generated by GNU Autoconf 2.61, -+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -+ -+Copyright (C) 2006 Free Software Foundation, Inc. -+This config.status script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it." -+ -+ac_pwd='$ac_pwd' -+srcdir='$srcdir' -+INSTALL='$INSTALL' -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If no file are specified by the user, then we need to provide default -+# value. By we need to know if files were specified by the user. -+ac_need_defaults=: -+while test $# != 0 -+do -+ case $1 in -+ --*=*) -+ ac_option=`expr "X$1" : 'X\([^=]*\)='` -+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` -+ ac_shift=: -+ ;; -+ *) -+ ac_option=$1 -+ ac_optarg=$2 -+ ac_shift=shift -+ ;; -+ esac -+ -+ case $ac_option in -+ # Handling of the options. -+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) -+ ac_cs_recheck=: ;; -+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) -+ echo "$ac_cs_version"; exit ;; -+ --debug | --debu | --deb | --de | --d | -d ) -+ debug=: ;; -+ --file | --fil | --fi | --f ) -+ $ac_shift -+ CONFIG_FILES="$CONFIG_FILES $ac_optarg" -+ ac_need_defaults=false;; -+ --he | --h | --help | --hel | -h ) -+ echo "$ac_cs_usage"; exit ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil | --si | --s) -+ ac_cs_silent=: ;; -+ -+ # This is an error. -+ -*) { echo "$as_me: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } ;; -+ -+ *) ac_config_targets="$ac_config_targets $1" -+ ac_need_defaults=false ;; -+ -+ esac -+ shift -+done -+ -+ac_configure_extra_args= -+ -+if $ac_cs_silent; then -+ exec 6>/dev/null -+ ac_configure_extra_args="$ac_configure_extra_args --silent" -+fi -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+if \$ac_cs_recheck; then -+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -+ CONFIG_SHELL=$SHELL -+ export CONFIG_SHELL -+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+fi -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+exec 5>>config.log -+{ -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+ echo "$ac_log" -+} >&5 -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ -+# Handling of arguments. -+for ac_config_target in $ac_config_targets -+do -+ case $ac_config_target in -+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ -+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -+echo "$as_me: error: invalid argument: $ac_config_target" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+done -+ -+ -+# If the user did not use the arguments to specify the items to instantiate, -+# then the envvar interface is used. Set only those that are not. -+# We use the long form for the default assignment because of an extremely -+# bizarre bug on SunOS 4.1.3. -+if $ac_need_defaults; then -+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -+fi -+ -+# Have a temporary directory for convenience. Make it in the build tree -+# simply because there is no reason against having it here, and in addition, -+# creating and moving files from /tmp can sometimes cause problems. -+# Hook for its removal unless debugging. -+# Note that there is a small window in which the directory will not be cleaned: -+# after its creation but before its name has been assigned to `$tmp'. -+$debug || -+{ -+ tmp= -+ trap 'exit_status=$? -+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+' 0 -+ trap '{ (exit 1); exit 1; }' 1 2 13 15 -+} -+# Create a (secure) tmp directory for tmp files. -+ -+{ -+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && -+ test -n "$tmp" && test -d "$tmp" -+} || -+{ -+ tmp=./conf$$-$RANDOM -+ (umask 077 && mkdir "$tmp") -+} || -+{ -+ echo "$me: cannot create a temporary directory in ." >&2 -+ { (exit 1); exit 1; } -+} -+ -+# -+# Set up the sed scripts for CONFIG_FILES section. -+# -+ -+# No need to generate the scripts if there are no CONFIG_FILES. -+# This happens for instance when ./config.status config.h -+if test -n "$CONFIG_FILES"; then -+ -+_ACEOF -+ -+ -+ -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ cat >conf$$subs.sed <<_ACEOF -+SHELL!$SHELL$ac_delim -+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -+PACKAGE_NAME!$PACKAGE_NAME$ac_delim -+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -+PACKAGE_STRING!$PACKAGE_STRING$ac_delim -+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -+exec_prefix!$exec_prefix$ac_delim -+prefix!$prefix$ac_delim -+program_transform_name!$program_transform_name$ac_delim -+bindir!$bindir$ac_delim -+sbindir!$sbindir$ac_delim -+libexecdir!$libexecdir$ac_delim -+datarootdir!$datarootdir$ac_delim -+datadir!$datadir$ac_delim -+sysconfdir!$sysconfdir$ac_delim -+sharedstatedir!$sharedstatedir$ac_delim -+localstatedir!$localstatedir$ac_delim -+includedir!$includedir$ac_delim -+oldincludedir!$oldincludedir$ac_delim -+docdir!$docdir$ac_delim -+infodir!$infodir$ac_delim -+htmldir!$htmldir$ac_delim -+dvidir!$dvidir$ac_delim -+pdfdir!$pdfdir$ac_delim -+psdir!$psdir$ac_delim -+libdir!$libdir$ac_delim -+localedir!$localedir$ac_delim -+mandir!$mandir$ac_delim -+DEFS!$DEFS$ac_delim -+ECHO_C!$ECHO_C$ac_delim -+ECHO_N!$ECHO_N$ac_delim -+ECHO_T!$ECHO_T$ac_delim -+LIBS!$LIBS$ac_delim -+build_alias!$build_alias$ac_delim -+host_alias!$host_alias$ac_delim -+target_alias!$target_alias$ac_delim -+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim -+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim -+newlib_basedir!$newlib_basedir$ac_delim -+build!$build$ac_delim -+build_cpu!$build_cpu$ac_delim -+build_vendor!$build_vendor$ac_delim -+build_os!$build_os$ac_delim -+host!$host$ac_delim -+host_cpu!$host_cpu$ac_delim -+host_vendor!$host_vendor$ac_delim -+host_os!$host_os$ac_delim -+target!$target$ac_delim -+target_cpu!$target_cpu$ac_delim -+target_vendor!$target_vendor$ac_delim -+target_os!$target_os$ac_delim -+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -+INSTALL_DATA!$INSTALL_DATA$ac_delim -+PACKAGE!$PACKAGE$ac_delim -+VERSION!$VERSION$ac_delim -+ACLOCAL!$ACLOCAL$ac_delim -+AUTOCONF!$AUTOCONF$ac_delim -+AUTOMAKE!$AUTOMAKE$ac_delim -+AUTOHEADER!$AUTOHEADER$ac_delim -+MAKEINFO!$MAKEINFO$ac_delim -+SET_MAKE!$SET_MAKE$ac_delim -+CC!$CC$ac_delim -+AS!$AS$ac_delim -+AR!$AR$ac_delim -+RANLIB!$RANLIB$ac_delim -+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim -+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim -+MAINT!$MAINT$ac_delim -+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim -+LDFLAGS!$LDFLAGS$ac_delim -+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim -+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim -+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim -+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim -+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim -+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim -+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim -+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim -+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim -+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim -+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim -+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim -+OBJEXT!$OBJEXT$ac_delim -+oext!$oext$ac_delim -+aext!$aext$ac_delim -+libm_machine_dir!$libm_machine_dir$ac_delim -+machine_dir!$machine_dir$ac_delim -+sys_dir!$sys_dir$ac_delim -+LIBOBJS!$LIBOBJS$ac_delim -+LTLIBOBJS!$LTLIBOBJS$ac_delim -+_ACEOF -+ -+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then -+ break -+ elif $ac_last_try; then -+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " -+ fi -+done -+ -+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -+if test -n "$ac_eof"; then -+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` -+ ac_eof=`expr $ac_eof + 1` -+fi -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -+_ACEOF -+sed ' -+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -+s/^/s,@/; s/!/@,|#_!!_#|/ -+:n -+t n -+s/'"$ac_delim"'$/,g/; t -+s/$/\\/; p -+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -+' >>$CONFIG_STATUS <conf$$subs.sed -+rm -f conf$$subs.sed -+cat >>$CONFIG_STATUS <<_ACEOF -+:end -+s/|#_!!_#|//g -+CEOF$ac_eof -+_ACEOF -+ -+ -+# VPATH may cause trouble with some makes, so we remove $(srcdir), -+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). -+if test "x$srcdir" = x.; then -+ ac_vpsub='/^[ ]*VPATH[ ]*=/{ -+s/:*\$(srcdir):*/:/ -+s/:*\${srcdir}:*/:/ -+s/:*@srcdir@:*/:/ -+s/^\([^=]*=[ ]*\):*/\1/ -+s/:*$// -+s/^[^=]*=[ ]*$// -+}' -+fi -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+fi # test -n "$CONFIG_FILES" -+ -+ -+for ac_tag in :F $CONFIG_FILES -+do -+ case $ac_tag in -+ :[FHLC]) ac_mode=$ac_tag; continue;; -+ esac -+ case $ac_mode$ac_tag in -+ :[FHL]*:*);; -+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -+echo "$as_me: error: Invalid tag $ac_tag." >&2;} -+ { (exit 1); exit 1; }; };; -+ :[FH]-) ac_tag=-:-;; -+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; -+ esac -+ ac_save_IFS=$IFS -+ IFS=: -+ set x $ac_tag -+ IFS=$ac_save_IFS -+ shift -+ ac_file=$1 -+ shift -+ -+ case $ac_mode in -+ :L) ac_source=$1;; -+ :[FH]) -+ ac_file_inputs= -+ for ac_f -+ do -+ case $ac_f in -+ -) ac_f="$tmp/stdin";; -+ *) # Look for the file first in the build tree, then in the source tree -+ # (if the path is not absolute). The absolute path cannot be DOS-style, -+ # because $ac_f cannot contain `:'. -+ test -f "$ac_f" || -+ case $ac_f in -+ [\\/$]*) false;; -+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; -+ esac || -+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -+echo "$as_me: error: cannot find input file: $ac_f" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+ ac_file_inputs="$ac_file_inputs $ac_f" -+ done -+ -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ configure_input="Generated from "`IFS=: -+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." -+ if test x"$ac_file" != x-; then -+ configure_input="$ac_file. $configure_input" -+ { echo "$as_me:$LINENO: creating $ac_file" >&5 -+echo "$as_me: creating $ac_file" >&6;} -+ fi -+ -+ case $ac_tag in -+ *:-:* | *:-) cat >"$tmp/stdin";; -+ esac -+ ;; -+ esac -+ -+ ac_dir=`$as_dirname -- "$ac_file" || -+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$ac_file" : 'X\(//\)[^/]' \| \ -+ X"$ac_file" : 'X\(//\)$' \| \ -+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$ac_file" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { -+ as_dirs= -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || -+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X\(//\)[^/]' \| \ -+ X"$as_dir" : 'X\(//\)$' \| \ -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break -+ done -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} -+ { (exit 1); exit 1; }; }; } -+ ac_builddir=. -+ -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix -+ -+case $srcdir in -+ .) # We are building in place. -+ ac_srcdir=. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -+ -+ -+ case $ac_mode in -+ :F) -+ # -+ # CONFIG_FILE -+ # -+ -+ case $INSTALL in -+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; -+ esac -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If the template does not know about datarootdir, expand it. -+# FIXME: This hack should be removed a few years after 2.60. -+ac_datarootdir_hack=; ac_datarootdir_seen= -+ -+case `sed -n '/datarootdir/ { -+ p -+ q -+} -+/@datadir@/p -+/@docdir@/p -+/@infodir@/p -+/@localedir@/p -+/@mandir@/p -+' $ac_file_inputs` in -+*datarootdir*) ac_datarootdir_seen=yes;; -+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) -+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ ac_datarootdir_hack=' -+ s&@datadir@&$datadir&g -+ s&@docdir@&$docdir&g -+ s&@infodir@&$infodir&g -+ s&@localedir@&$localedir&g -+ s&@mandir@&$mandir&g -+ s&\\\${datarootdir}&$datarootdir&g' ;; -+esac -+_ACEOF -+ -+# Neutralize VPATH when `$srcdir' = `.'. -+# Shell code in configure.ac might set extrasub. -+# FIXME: do we really want to maintain this feature? -+cat >>$CONFIG_STATUS <<_ACEOF -+ sed "$ac_vpsub -+$extrasub -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+:t -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -+s&@configure_input@&$configure_input&;t t -+s&@top_builddir@&$ac_top_builddir_sub&;t t -+s&@srcdir@&$ac_srcdir&;t t -+s&@abs_srcdir@&$ac_abs_srcdir&;t t -+s&@top_srcdir@&$ac_top_srcdir&;t t -+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -+s&@builddir@&$ac_builddir&;t t -+s&@abs_builddir@&$ac_abs_builddir&;t t -+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -+s&@INSTALL@&$ac_INSTALL&;t t -+$ac_datarootdir_hack -+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out -+ -+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&5 -+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&2;} -+ -+ rm -f "$tmp/stdin" -+ case $ac_file in -+ -) cat "$tmp/out"; rm -f "$tmp/out";; -+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; -+ esac -+ ;; -+ -+ -+ -+ esac -+ -+done # for ac_tag -+ -+ -+{ (exit 0); exit 0; } -+_ACEOF -+chmod +x $CONFIG_STATUS -+ac_clean_files=$ac_clean_files_save -+ -+ -+# configure is writing to config.log, and then calls config.status. -+# config.status does its own redirection, appending to config.log. -+# Unfortunately, on DOS this fails, as config.log is still kept open -+# by configure, so config.status won't be able to write to it; its -+# output is simply discarded. So we exec the FD to /dev/null, -+# effectively closing config.log, so it can be properly (re)opened and -+# appended to by config.status. When coming back to configure, we -+# need to make the FD available again. -+if test "$no_create" != yes; then -+ ac_cs_success=: -+ ac_config_status_args= -+ test "$silent" = yes && -+ ac_config_status_args="$ac_config_status_args --quiet" -+ exec 5>/dev/null -+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false -+ exec 5>>config.log -+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which -+ # would make configure fail if this is the last instruction. -+ $ac_cs_success || { (exit 1); exit 1; } -+fi -+ -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure.in newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in ---- newlib-1.17.0/newlib/libc/machine/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,14 @@ -+dnl This is the newlib/libc/machine/arm configure.in file. -+dnl Process this file with autoconf to produce a configure script. -+ -+AC_PREREQ(2.59) -+AC_INIT([newlib],[NEWLIB_VERSION]) -+AC_CONFIG_SRCDIR([Makefile.am]) -+ -+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. -+AC_CONFIG_AUX_DIR(../../../..) -+ -+NEWLIB_CONFIGURE(../../..) -+ -+AC_CONFIG_FILES([Makefile]) -+AC_OUTPUT -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am ---- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,16 @@ -+## Process this file with automake to generate Makefile.in -+ -+AUTOMAKE_OPTIONS = cygnus -+ -+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -+ -+AM_CCASFLAGS = $(INCLUDES) -+ -+noinst_LIBRARIES = lib.a -+ -+lib_a_SOURCES = strcmp.S strncpy.S memcpy.S -+lib_a_CCASFLAGS=$(AM_CCASFLAGS) -+lib_a_CFLAGS = $(AM_CFLAGS) -+ -+ACLOCAL_AMFLAGS = -I ../../.. -+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in ---- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,327 @@ -+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -+ -+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -+# This Makefile.in is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -+# PARTICULAR PURPOSE. -+ -+ -+SHELL = @SHELL@ -+ -+srcdir = @srcdir@ -+top_srcdir = @top_srcdir@ -+VPATH = @srcdir@ -+prefix = @prefix@ -+exec_prefix = @exec_prefix@ -+ -+bindir = @bindir@ -+sbindir = @sbindir@ -+libexecdir = @libexecdir@ -+datadir = @datadir@ -+sysconfdir = @sysconfdir@ -+sharedstatedir = @sharedstatedir@ -+localstatedir = @localstatedir@ -+libdir = @libdir@ -+infodir = @infodir@ -+mandir = @mandir@ -+includedir = @includedir@ -+oldincludedir = /usr/include -+ -+DESTDIR = -+ -+pkgdatadir = $(datadir)/@PACKAGE@ -+pkglibdir = $(libdir)/@PACKAGE@ -+pkgincludedir = $(includedir)/@PACKAGE@ -+ -+top_builddir = . -+ -+ACLOCAL = @ACLOCAL@ -+AUTOCONF = @AUTOCONF@ -+AUTOMAKE = @AUTOMAKE@ -+AUTOHEADER = @AUTOHEADER@ -+ -+INSTALL = @INSTALL@ -+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) -+INSTALL_DATA = @INSTALL_DATA@ -+INSTALL_SCRIPT = @INSTALL_SCRIPT@ -+transform = @program_transform_name@ -+ -+NORMAL_INSTALL = : -+PRE_INSTALL = : -+POST_INSTALL = : -+NORMAL_UNINSTALL = : -+PRE_UNINSTALL = : -+POST_UNINSTALL = : -+build_alias = @build_alias@ -+build_triplet = @build@ -+host_alias = @host_alias@ -+host_triplet = @host@ -+target_alias = @target_alias@ -+target_triplet = @target@ -+AR = @AR@ -+AS = @AS@ -+CC = @CC@ -+CPP = @CPP@ -+EXEEXT = @EXEEXT@ -+LDFLAGS = @LDFLAGS@ -+MAINT = @MAINT@ -+MAKEINFO = @MAKEINFO@ -+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ -+OBJEXT = @OBJEXT@ -+PACKAGE = @PACKAGE@ -+RANLIB = @RANLIB@ -+VERSION = @VERSION@ -+aext = @aext@ -+libm_machine_dir = @libm_machine_dir@ -+machine_dir = @machine_dir@ -+newlib_basedir = @newlib_basedir@ -+oext = @oext@ -+sys_dir = @sys_dir@ -+ -+AUTOMAKE_OPTIONS = cygnus -+ -+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -+ -+noinst_LIBRARIES = lib.a -+ -+lib_a_SOURCES = strcmp.S strncpy.S memcpy.S -+ -+ACLOCAL_AMFLAGS = -I ../../.. -+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host -+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs -+CONFIG_CLEAN_FILES = -+LIBRARIES = $(noinst_LIBRARIES) -+ -+ -+DEFS = @DEFS@ -I. -I$(srcdir) -+CPPFLAGS = -+LIBS = @LIBS@ -+lib_a_LIBADD = -+lib_a_OBJECTS = strcmp.o strncpy.o memcpy.o -+CFLAGS = @CFLAGS@ -+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -+CCLD = $(CC) -+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ -+DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in -+ -+ -+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -+ -+TAR = gtar -+GZIP_ENV = --best -+SOURCES = $(lib_a_SOURCES) -+OBJECTS = $(lib_a_OBJECTS) -+ -+all: all-redirect -+.SUFFIXES: -+.SUFFIXES: .S .c .o .s -+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -+ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile -+ -+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status -+ cd $(top_builddir) \ -+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -+ -+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ -+ ../../../acinclude.m4 ../../../aclocal.m4 \ -+ ../../../libtool.m4 -+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -+ -+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) -+ $(SHELL) ./config.status --recheck -+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) -+ cd $(srcdir) && $(AUTOCONF) -+ -+mostlyclean-noinstLIBRARIES: -+ -+clean-noinstLIBRARIES: -+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -+ -+distclean-noinstLIBRARIES: -+ -+maintainer-clean-noinstLIBRARIES: -+ -+.c.o: -+ $(COMPILE) -c $< -+ -+.s.o: -+ $(COMPILE) -c $< -+ -+.S.o: -+ $(COMPILE) -c $< -+ -+mostlyclean-compile: -+ -rm -f *.o core *.core -+ -+clean-compile: -+ -+distclean-compile: -+ -rm -f *.tab.c -+ -+maintainer-clean-compile: -+ -+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) -+ -rm -f lib.a -+ $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) -+ $(RANLIB) lib.a -+ -+tags: TAGS -+ -+ID: $(HEADERS) $(SOURCES) $(LISP) -+ list='$(SOURCES) $(HEADERS)'; \ -+ unique=`for i in $$list; do echo $$i; done | \ -+ awk ' { files[$$0] = 1; } \ -+ END { for (i in files) print i; }'`; \ -+ here=`pwd` && cd $(srcdir) \ -+ && mkid -f$$here/ID $$unique $(LISP) -+ -+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) -+ tags=; \ -+ here=`pwd`; \ -+ list='$(SOURCES) $(HEADERS)'; \ -+ unique=`for i in $$list; do echo $$i; done | \ -+ awk ' { files[$$0] = 1; } \ -+ END { for (i in files) print i; }'`; \ -+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ -+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) -+ -+mostlyclean-tags: -+ -+clean-tags: -+ -+distclean-tags: -+ -rm -f TAGS ID -+ -+maintainer-clean-tags: -+ -+distdir = $(PACKAGE)-$(VERSION) -+top_distdir = $(distdir) -+ -+# This target untars the dist file and tries a VPATH configuration. Then -+# it guarantees that the distribution is self-contained by making another -+# tarfile. -+distcheck: dist -+ -rm -rf $(distdir) -+ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz -+ mkdir $(distdir)/=build -+ mkdir $(distdir)/=inst -+ dc_install_base=`cd $(distdir)/=inst && pwd`; \ -+ cd $(distdir)/=build \ -+ && ../configure --srcdir=.. --prefix=$$dc_install_base \ -+ && $(MAKE) $(AM_MAKEFLAGS) \ -+ && $(MAKE) $(AM_MAKEFLAGS) dvi \ -+ && $(MAKE) $(AM_MAKEFLAGS) check \ -+ && $(MAKE) $(AM_MAKEFLAGS) install \ -+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ -+ && $(MAKE) $(AM_MAKEFLAGS) dist -+ -rm -rf $(distdir) -+ @banner="$(distdir).tar.gz is ready for distribution"; \ -+ dashes=`echo "$$banner" | sed s/./=/g`; \ -+ echo "$$dashes"; \ -+ echo "$$banner"; \ -+ echo "$$dashes" -+dist: distdir -+ -chmod -R a+r $(distdir) -+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -+ -rm -rf $(distdir) -+dist-all: distdir -+ -chmod -R a+r $(distdir) -+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -+ -rm -rf $(distdir) -+distdir: $(DISTFILES) -+ -rm -rf $(distdir) -+ mkdir $(distdir) -+ -chmod 777 $(distdir) -+ @for file in $(DISTFILES); do \ -+ if test -f $$file; then d=.; else d=$(srcdir); fi; \ -+ if test -d $$d/$$file; then \ -+ cp -pr $$d/$$file $(distdir)/$$file; \ -+ else \ -+ test -f $(distdir)/$$file \ -+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ -+ || cp -p $$d/$$file $(distdir)/$$file || :; \ -+ fi; \ -+ done -+info-am: -+info: info-am -+dvi-am: -+dvi: dvi-am -+check-am: -+check: check-am -+installcheck-am: -+installcheck: installcheck-am -+install-info-am: -+install-info: install-info-am -+install-exec-am: -+install-exec: install-exec-am -+ -+install-data-am: -+install-data: install-data-am -+ -+install-am: all-am -+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -+install: install-am -+uninstall-am: -+uninstall: uninstall-am -+all-am: Makefile $(LIBRARIES) -+all-redirect: all-am -+install-strip: -+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -+installdirs: -+ -+ -+mostlyclean-generic: -+ -+clean-generic: -+ -+distclean-generic: -+ -rm -f Makefile $(CONFIG_CLEAN_FILES) -+ -rm -f config.cache config.log stamp-h stamp-h[0-9]* -+ -+maintainer-clean-generic: -+mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ -+ mostlyclean-tags mostlyclean-generic -+ -+mostlyclean: mostlyclean-am -+ -+clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ -+ mostlyclean-am -+ -+clean: clean-am -+ -+distclean-am: distclean-noinstLIBRARIES distclean-compile \ -+ distclean-tags distclean-generic clean-am -+ -+distclean: distclean-am -+ -rm -f config.status -+ -+maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ -+ maintainer-clean-compile maintainer-clean-tags \ -+ maintainer-clean-generic distclean-am -+ @echo "This command is intended for maintainers to use;" -+ @echo "it deletes files that may require special tools to rebuild." -+ -+maintainer-clean: maintainer-clean-am -+ -rm -f config.status -+ -+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ -+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ -+mostlyclean-compile distclean-compile clean-compile \ -+maintainer-clean-compile tags mostlyclean-tags distclean-tags \ -+clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ -+check-am installcheck-am installcheck install-info-am install-info \ -+install-exec-am install-exec install-data-am install-data install-am \ -+install uninstall-am uninstall all-redirect all-am all installdirs \ -+mostlyclean-generic distclean-generic clean-generic \ -+maintainer-clean-generic clean mostlyclean distclean maintainer-clean -+ -+ -+# Tell versions [3.59,3.63) of GNU make to not export all variables. -+# Otherwise a system limit (for SysV at least) may be exceeded. -+.NOEXPORT: -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S ---- newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,269 @@ -+/* -+ * Copyright (C) 2004 Atmel Norway -+ */ -+ -+/* Don't use r12 as dst since we must return it unmodified */ -+ -+ .text -+ .global memcpy -+ .type memcpy, @function -+#if defined(__AVR32_HAS_UNALIGNED_WORD__) -+memcpy: -+ /* Check if src and dst are aligned -+ if not do a word based copying. */ -+ or r9, r12, r11 -+ andl r9, 3, COH -+ brne .Lunaligned_copy -+ -+ pushm r12, lr -+ sub r10, 8 -+ brmi .Lword_copy -+ -+0: -+ ld.d r8, r11++ -+ sub r10, 8 -+ st.d r12++, r8 -+ brpl 0b -+ -+.Lword_copy: -+ sub r10, -4 -+ brmi .Lbyte_copy -+ -+0: -+ ld.w r8, r11++ -+ sub r10, 4 -+ st.w r12++, r8 -+ brpl 0b -+ -+.Lbyte_copy: -+ sub r10, -4 -+ breq 2f -+1: -+ ld.ub r8, r11++ -+ sub r10, 1 -+ st.b r12++, r8 -+ brne 1b -+2: -+ popm r12, pc -+ -+.Lunaligned_copy: -+ mov r9, r12 -+ sub r10, 4 -+ -+ brmi .Lbyte_copy2 -+ -+0: -+ ld.w r8, r11++ -+ sub r10, 4 -+ st.w r12++, r8 -+ brpl 0b -+ -+.Lbyte_copy2: -+ sub r10, -4 -+ reteq r9 -+1: -+ ld.ub r8, r11++ -+ sub r10, 1 -+ st.b r12++, r8 -+ brne 1b -+ -+ ret r9 -+ -+ -+#else -+ -+#define dst r9 -+#define src r11 -+#define len r10 -+ -+#if defined(__AVR32_UC__) -+memcpy: -+ /* If we have less than 8 bytes, don't do anything fancy -+ just an unrolled byte copy */ -+ cp.w r10, 8 -+ brlt .Lless_than_8 -+ /* Check if src and dst are aligned. */ -+ or r9, r12, r11 -+ andl r9, 3, COH -+ brne .Lunaligned_copy -+ -+ /* Check if larger than 31 */ -+ cp.w r10, 32 -+ brge .Lmore_than_31: -+ -+ /* Less than 32. */ -+ asr r8, r10, 2 -+ rsub r9, r8, 8 -+ add pc, pc, r9 << 2 -+ .irp offset,0,1,2,3,4,5,6 -+ ld.w r9, r11[(6-\offset)*4] -+ st.w r12[(6-\offset)*4], r9 -+ .endr -+ -+ add r11, r11, r8 << 2 -+ add r8, r12, r8 << 2 -+ andl r10, 0x3 -+ rsub r10, r10, 4 -+ add pc, pc, r10 << 2 -+ .irp offset,0,1,2 -+ ld.ub r9, r11[2-\offset] -+ st.b r8[2-\offset], r9 -+ .endr -+ -+ retal r12 -+ -+.Lless_than_8: -+ rsub r10, r10, 9 -+ add pc, pc, r10 << 2 -+ .irp offset,0,1,2,3,4,5,6,7 -+ ld.ub r9, r11[7-\offset] -+ st.b r12[7-\offset], r9 -+ .endr -+ -+ retal r12 -+ -+.Lmore_than_31: -+ stm --sp, r6-r7, lr -+ mov r9, r12 -+ -+.Laligned_copy: -+ sub r10, 32 -+ -+1: /* Copy 32 bytes at a time */ -+ ld.d r6, r11++ -+ st.d r9++, r6 -+ ld.d r6, r11++ -+ st.d r9++, r6 -+ ld.d r6, r11++ -+ st.d r9++, r6 -+ ld.d r6, r11++ -+ st.d r9++, r6 -+ sub r10, 32 -+ brge 1b -+ -+.Lless_than_32: -+ /* Copy 16 more bytes if possible */ -+ sub r10, -16 -+ brlt .Lless_than_16 -+ ld.d r6, r11++ -+ st.d r9++, r6 -+ ld.d r6, r11++ -+ st.d r9++, r6 -+ sub r10, 16 -+ -+.Lless_than_16: -+ -+ /* Do the remaining as byte copies */ -+ neg r10 -+ add pc, pc, r10 << 3 -+ nop -+ nop -+ .irp offset,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14 -+ ld.ub r6, r11[14-\offset],e -+ st.b r9[14-\offset], r6,e -+ .endr -+ -+ ldm sp++, r6-r7, pc -+ -+.Lunaligned_copy: -+ /* src and dst are unaligned. */ -+0: -+ sub r10, 1 -+ ld.ub r9, r11[r10] -+ st.b r12[r10], r9 -+ brne 0b -+ -+ retal r12 -+ .size memcpy, . - memcpy -+ -+#else -+memcpy: -+ pref src[0] -+ mov dst, r12 -+ -+ /* If we have less than 32 bytes, don't do anything fancy */ -+ cp.w len, 32 -+ brge .Lmore_than_31 -+ -+ sub len, 1 -+ retlt r12 -+1: ld.ub r8, src++ -+ st.b r12, r8 -+ sub len, 1 -+ brge 1b -+ retal r12 -+ -+.Lmore_than_31: -+ pushm r0-r7, lr -+ -+ /* Check alignment */ -+ mov r8, src -+ andl r8, 31, COH -+ brne .Lunaligned_src -+ mov r8, dst -+ andl r8, 3, COH -+ brne .Lunaligned_dst -+ -+.Laligned_copy: -+ sub len, 32 -+ brlt .Lless_than_32 -+ -+1: /* Copy 32 bytes at a time */ -+ pref src[32] -+ ldm src, r0-r7 -+ sub src, -32 -+ stm dst, r0-r7 -+ sub dst, -32 -+ sub len, 32 -+ brge 1b -+ -+.Lless_than_32: -+ /* Copy 16 more bytes if possible */ -+ sub len, -16 -+ brlt .Lless_than_16 -+ ldm src, r0-r3 -+ sub src, -16 -+ sub len, 16 -+ stm dst, r0-r3 -+ sub dst, -16 -+ -+.Lless_than_16: -+ /* Do the remaining as byte copies */ -+ neg len -+ add pc, pc, len << 2 -+ .rept 15 -+ ld.ub r0, src++ -+ st.b dst++, r0 -+ .endr -+ -+ popm r0-r7, pc -+ -+.Lunaligned_src: -+ /* Make src cacheline-aligned. r8 = (src & 31) */ -+ rsub r8, r8, 32 -+ sub len, r8 -+1: ld.ub r0, src++ -+ st.b dst++, r0 -+ sub r8, 1 -+ brne 1b -+ -+ /* If dst is word-aligned, we're ready to go */ -+ pref src[0] -+ mov r8, 3 -+ tst dst, r8 -+ breq .Laligned_copy -+ -+.Lunaligned_dst: -+ /* src is aligned, but dst is not. Expect bad performance */ -+0: -+ ld.ub r0, src++ -+ st.b dst++, r0 -+ sub len, 1 -+ brne 0b -+ -+ popm r0-r7, pc -+ .size memcpy, . - memcpy -+ -+ -+#endif -+#endif -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S ---- newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,133 @@ -+ .align 2 -+ .global strcmp -+ -+strcmp: -+#if !defined(__AVR32_HAS_UNALIGNED_WORD__) -+#ifdef __AVR32_UC__ -+ /* Check if both strings are aligned. */ -+ or r10, r12, r11 -+ andl r10, 3, COH -+ brne .Lbyte_strcmp -+0: -+ ld.w r10, r12[0] -+ ld.w r9, r11[0] -+ tnbz r10 -+ breq 1f -+ cp.w r10, r9 -+ brne 1f -+ ld.w r10, r12[4] -+ ld.w r9, r11[4] -+ tnbz r10 -+ breq 1f -+ cp.w r10, r9 -+ brne 1f -+ ld.w r10, r12[8] -+ ld.w r9, r11[8] -+ tnbz r10 -+ breq 1f -+ cp.w r10, r9 -+ brne 1f -+ ld.w r10, r12[12] -+ ld.w r9, r11[12] -+ tnbz r10 -+ breq 1f -+ sub r12, -16 -+ sub r11, -16 -+ cp.w r10, r9 -+ breq 0b -+1: -+ bfextu r12, r10, 24, 8 -+ bfextu r11, r9, 24, 8 -+ reteq r12 -+ sub r12, r11 -+ retne r12 -+ -+ bfextu r12, r10, 16, 8 -+ bfextu r11, r9, 16, 8 -+ reteq r12 -+ sub r12, r11 -+ retne r12 -+ -+ bfextu r12, r10, 8, 8 -+ bfextu r11, r9, 8, 8 -+ reteq r12 -+ sub r12, r11 -+ retne r12 -+ -+ castu.b r10 -+ castu.b r9 -+ sub r10, r9 -+ ret r10 -+ -+.Lbyte_strcmp: -+0: -+ ld.ub r10, r11[0] -+ ld.ub r9, r12[0] -+ cp.w r10, 0 -+ reteq r9 -+ sub r9, r10 -+ retne r9 -+ ld.ub r10, r11[1] -+ ld.ub r9, r12[1] -+ cp.w r10, 0 -+ reteq r9 -+ sub r9, r10 -+ retne r9 -+ ld.ub r10, r11[2] -+ ld.ub r9, r12[2] -+ cp.w r10, 0 -+ reteq r9 -+ sub r9, r10 -+ retne r9 -+ ld.ub r10, r11[3] -+ ld.ub r9, r12[3] -+ cp.w r10, 0 -+ reteq r9 -+ sub r9, r10 -+ retne r9 -+ sub r11, -4 -+ sub r12, -4 -+ rjmp 0b -+#else -+0: -+ ld.ub r10, r11++ -+ ld.ub r9, r12++ -+ cp.w r10, 0 -+ reteq r9 -+ sub r9, r10 -+ breq 0b -+ ret r9 -+#endif -+#else -+0: -+ ld.w r10, r12++ -+ ld.w r9, r11++ -+ tnbz r10 -+ breq 1f -+ cp.w r10, r9 -+ breq 0b -+ -+1: -+ bfextu r12, r10, 24, 8 -+ bfextu r11, r9, 24, 8 -+ reteq r12 -+ sub r12, r11 -+ retne r12 -+ -+ bfextu r12, r10, 16, 8 -+ bfextu r11, r9, 16, 8 -+ reteq r12 -+ sub r12, r11 -+ retne r12 -+ -+ bfextu r12, r10, 8, 8 -+ bfextu r11, r9, 8, 8 -+ reteq r12 -+ sub r12, r11 -+ retne r12 -+ -+ castu.b r10 -+ castu.b r9 -+ sub r10, r9 -+ ret r10 -+#endif -diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S ---- newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,39 @@ -+ .align 2 -+ .global strncpy -+ -+strncpy : -+#ifdef __AVR32_UC__ -+ mov r8, 0 -+0: -+ cp.w r10, r8 -+ reteq r12 -+ ld.ub r9, r11[r8] -+ st.b r12[r8], r9 -+ sub r8, -1 -+ cp.w r9, 0 -+ brne 0b -+ -+1: -+ cp.w r10, r8 -+ reteq r12 -+ st.b r12[r8], r9 -+ sub r8, -1 -+ rjmp 1b -+#else -+ mov r8, r12 -+0: -+ sub r10, 1 -+ ld.ub r9, r11++ -+ retmi r12 -+ st.b r8++, r9 -+ cp.w r9, 0 -+ brne 0b -+ -+1: -+ sub r10, 1 -+ retmi r12 -+ st.b r8++, r9 -+ rjmp 1b -+ -+ -+#endif -diff -Naur newlib-1.17.0/newlib/libc/machine/configure newlib-1.17.0-new/newlib/libc/machine/configure ---- newlib-1.17.0/newlib/libc/machine/configure 2008-12-22 20:45:41.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/configure 2009-05-22 09:57:50.000000000 +0200 -@@ -1,25 +1,54 @@ - #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.59 for newlib 1.17.0. -+# Generated by GNU Autoconf 2.61 for newlib 1.17.0. - # --# Copyright (C) 2003 Free Software Foundation, Inc. -+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. - ## --------------------- ## - ## M4sh Initialization. ## - ## --------------------- ## - --# Be Bourne compatible -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh - fi --DUALCASE=1; export DUALCASE # for MKS sh - - # Support unset when possible. - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -29,8 +58,43 @@ - fi - - -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ - # Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done - PS1='$ ' - PS2='> ' - PS4='+ ' -@@ -44,18 +108,19 @@ - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else -- $as_unset $as_var -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi - done - - # Required to use basename. --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename - else - as_basename=false -@@ -63,157 +128,388 @@ - - - # Name of the executable. --as_me=`$as_basename "$0" || -+as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)$' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || - echo X/"$0" | -- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -- /^X\/\(\/\/\)$/{ s//\1/; q; } -- /^X\/\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - -+# CDPATH. -+$as_unset CDPATH - --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits - --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh -+if test "x$CONFIG_SHELL" = x; then -+ if (eval ":") 2>/dev/null; then -+ as_have_required=yes -+else -+ as_have_required=no - fi - -+ if test $as_have_required = yes && (eval ": -+(as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} - -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi - -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=\$LINENO -+ as_lineno_2=\$LINENO -+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && -+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -+") 2> /dev/null; then -+ : -+else -+ as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -+ case $as_dir in - /*) -- if ("$as_dir/$as_base" -c ' -+ for as_base in sh bash ksh sh5; do -+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" -+ done;; -+ esac -+done -+IFS=$as_save_IFS -+ -+ -+ for as_shell in $as_candidate_shells $SHELL; do -+ # Try only shells that exist, to save several forks. -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { ("$as_shell") 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+_ASEOF -+}; then -+ CONFIG_SHELL=$as_shell -+ as_have_required=yes -+ if { "$as_shell" 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+(as_func_return () { -+ (exit $1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = "$1" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test $exitcode = 0) || { (exit 1); exit 1; } -+ -+( - as_lineno_1=$LINENO - as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -+ -+_ASEOF -+}; then -+ break -+fi -+ -+fi -+ -+ done -+ -+ if test "x$CONFIG_SHELL" != x; then -+ for as_var in BASH_ENV ENV -+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ done -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ -+ if test $as_have_required = no; then -+ echo This script requires a shell more modern than all the -+ echo shells that I found on your system. Please install a -+ echo modern shell, or manually run the script under such a -+ echo shell if you do have one. -+ { (exit 1); exit 1; } -+fi -+ -+ -+fi -+ -+fi -+ -+ -+ -+(eval "as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0") || { -+ echo No shell found that supports shell functions. -+ echo Please tell autoconf@gnu.org about your system, -+ echo including any error possibly output before this -+ echo message -+} -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | - sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno - N -- s,$,-, -- : loop -- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -+ s/-\n.*// - ' >$as_me.lineno && -- chmod +x $as_me.lineno || -+ chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" - # Exit status is that of the last command. - exit - } - - --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; - esac - --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - - rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi - echo >conf$$.file - if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -- else -- as_ln_s='ln -s' -- fi - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi --rm -f conf$$ conf$$.exe conf$$.file -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null - - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -@@ -222,7 +518,28 @@ - as_mkdir_p=false - fi - --as_executable_p="test -f" -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x - - # Sed expression to map a string onto a valid CPP name. - as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -@@ -231,15 +548,6 @@ - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH -- - - - # Check that we are running under the correct shell. -@@ -390,29 +698,26 @@ - - - -+exec 7<&0 </dev/null 6>&1 -+ - # Name of the host. - # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, - # so uname gets run too. - ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - --exec 6>&1 -- - # - # Initializations. - # - ac_default_prefix=/usr/local -+ac_clean_files= - ac_config_libobj_dir=. -+LIBOBJS= - cross_compiling=no - subdirs= - MFLAGS= - MAKEFLAGS= - SHELL=${CONFIG_SHELL-/bin/sh} - --# Maximum number of lines to put in a shell here document. --# This variable seems obsolete. It should probably be removed, and --# only ac_max_sed_lines should be used. --: ${ac_max_here_lines=38} -- - # Identity of this package. - PACKAGE_NAME='newlib' - PACKAGE_TARNAME='newlib' -@@ -424,81 +729,228 @@ - # Factoring default headers for most tests. - ac_includes_default="\ - #include <stdio.h> --#if HAVE_SYS_TYPES_H -+#ifdef HAVE_SYS_TYPES_H - # include <sys/types.h> - #endif --#if HAVE_SYS_STAT_H -+#ifdef HAVE_SYS_STAT_H - # include <sys/stat.h> - #endif --#if STDC_HEADERS -+#ifdef STDC_HEADERS - # include <stdlib.h> - # include <stddef.h> - #else --# if HAVE_STDLIB_H -+# ifdef HAVE_STDLIB_H - # include <stdlib.h> - # endif - #endif --#if HAVE_STRING_H --# if !STDC_HEADERS && HAVE_MEMORY_H -+#ifdef HAVE_STRING_H -+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H - # include <memory.h> - # endif - # include <string.h> - #endif --#if HAVE_STRINGS_H -+#ifdef HAVE_STRINGS_H - # include <strings.h> - #endif --#if HAVE_INTTYPES_H -+#ifdef HAVE_INTTYPES_H - # include <inttypes.h> --#else --# if HAVE_STDINT_H --# include <stdint.h> --# endif - #endif --#if HAVE_UNISTD_H -+#ifdef HAVE_STDINT_H -+# include <stdint.h> -+#endif -+#ifdef HAVE_UNISTD_H - # include <unistd.h> - #endif" - --ac_subdirs_all="$ac_subdirs_all a29k" --ac_subdirs_all="$ac_subdirs_all arm" --ac_subdirs_all="$ac_subdirs_all bfin" --ac_subdirs_all="$ac_subdirs_all cris" --ac_subdirs_all="$ac_subdirs_all crx" --ac_subdirs_all="$ac_subdirs_all d10v" --ac_subdirs_all="$ac_subdirs_all d30v" --ac_subdirs_all="$ac_subdirs_all fr30" --ac_subdirs_all="$ac_subdirs_all frv" --ac_subdirs_all="$ac_subdirs_all h8300" --ac_subdirs_all="$ac_subdirs_all h8500" --ac_subdirs_all="$ac_subdirs_all hppa" --ac_subdirs_all="$ac_subdirs_all i386" --ac_subdirs_all="$ac_subdirs_all i960" --ac_subdirs_all="$ac_subdirs_all iq2000" --ac_subdirs_all="$ac_subdirs_all lm32" --ac_subdirs_all="$ac_subdirs_all m32c" --ac_subdirs_all="$ac_subdirs_all m32r" --ac_subdirs_all="$ac_subdirs_all m68hc11" --ac_subdirs_all="$ac_subdirs_all m68k" --ac_subdirs_all="$ac_subdirs_all m88k" --ac_subdirs_all="$ac_subdirs_all mep" --ac_subdirs_all="$ac_subdirs_all mips" --ac_subdirs_all="$ac_subdirs_all mn10200" --ac_subdirs_all="$ac_subdirs_all mn10300" --ac_subdirs_all="$ac_subdirs_all mt" --ac_subdirs_all="$ac_subdirs_all necv70" --ac_subdirs_all="$ac_subdirs_all powerpc" --ac_subdirs_all="$ac_subdirs_all sh" --ac_subdirs_all="$ac_subdirs_all sparc" --ac_subdirs_all="$ac_subdirs_all spu" --ac_subdirs_all="$ac_subdirs_all tic4x" --ac_subdirs_all="$ac_subdirs_all tic80" --ac_subdirs_all="$ac_subdirs_all v850" --ac_subdirs_all="$ac_subdirs_all w65" --ac_subdirs_all="$ac_subdirs_all x86_64" --ac_subdirs_all="$ac_subdirs_all xscale" --ac_subdirs_all="$ac_subdirs_all xstormy16" --ac_subdirs_all="$ac_subdirs_all z8k" --ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs HAVE_MACHINE_DIR_TRUE HAVE_MACHINE_DIR_FALSE LIBOBJS LTLIBOBJS' -+ac_subst_vars='SHELL -+PATH_SEPARATOR -+PACKAGE_NAME -+PACKAGE_TARNAME -+PACKAGE_VERSION -+PACKAGE_STRING -+PACKAGE_BUGREPORT -+exec_prefix -+prefix -+program_transform_name -+bindir -+sbindir -+libexecdir -+datarootdir -+datadir -+sysconfdir -+sharedstatedir -+localstatedir -+includedir -+oldincludedir -+docdir -+infodir -+htmldir -+dvidir -+pdfdir -+psdir -+libdir -+localedir -+mandir -+DEFS -+ECHO_C -+ECHO_N -+ECHO_T -+LIBS -+build_alias -+host_alias -+target_alias -+MAY_SUPPLY_SYSCALLS_TRUE -+MAY_SUPPLY_SYSCALLS_FALSE -+newlib_basedir -+build -+build_cpu -+build_vendor -+build_os -+host -+host_cpu -+host_vendor -+host_os -+INSTALL_PROGRAM -+INSTALL_SCRIPT -+INSTALL_DATA -+CYGPATH_W -+PACKAGE -+VERSION -+ACLOCAL -+AUTOCONF -+AUTOMAKE -+AUTOHEADER -+MAKEINFO -+install_sh -+STRIP -+INSTALL_STRIP_PROGRAM -+mkdir_p -+AWK -+SET_MAKE -+am__leading_dot -+AMTAR -+am__tar -+am__untar -+CC -+DEPDIR -+am__include -+am__quote -+AMDEP_TRUE -+AMDEP_FALSE -+AMDEPBACKSLASH -+CCDEPMODE -+am__fastdepCC_TRUE -+am__fastdepCC_FALSE -+AS -+AR -+RANLIB -+READELF -+MAINTAINER_MODE_TRUE -+MAINTAINER_MODE_FALSE -+MAINT -+CCAS -+CCASFLAGS -+NEWLIB_CFLAGS -+LDFLAGS -+ELIX_LEVEL_0_TRUE -+ELIX_LEVEL_0_FALSE -+ELIX_LEVEL_1_TRUE -+ELIX_LEVEL_1_FALSE -+ELIX_LEVEL_2_TRUE -+ELIX_LEVEL_2_FALSE -+ELIX_LEVEL_3_TRUE -+ELIX_LEVEL_3_FALSE -+ELIX_LEVEL_4_TRUE -+ELIX_LEVEL_4_FALSE -+USE_LIBTOOL_TRUE -+USE_LIBTOOL_FALSE -+OBJEXT -+oext -+aext -+lpfx -+libm_machine_dir -+machine_dir -+sys_dir -+SED -+DLLTOOL -+OBJDUMP -+LIBTOOL -+CFLAGS -+CPPFLAGS -+ac_ct_CC -+EXEEXT -+GREP -+EGREP -+FGREP -+LD -+DUMPBIN -+ac_ct_DUMPBIN -+NM -+LN_S -+lt_ECHO -+DSYMUTIL -+NMEDIT -+LIPO -+OTOOL -+OTOOL64 -+CPP -+subdirs -+HAVE_MACHINE_DIR_TRUE -+HAVE_MACHINE_DIR_FALSE -+LIBOBJS -+LTLIBOBJS' - ac_subst_files='' -+ ac_precious_vars='build_alias -+host_alias -+target_alias -+CCAS -+CCASFLAGS -+CC -+CFLAGS -+LDFLAGS -+LIBS -+CPPFLAGS -+CPP' -+ac_subdirs_all='a29k -+arm -+avr32 -+bfin -+cris -+crx -+d10v -+d30v -+fr30 -+frv -+h8300 -+h8500 -+hppa -+i386 -+i960 -+iq2000 -+lm32 -+m32c -+m32r -+m68hc11 -+m68k -+m88k -+mep -+mips -+mn10200 -+mn10300 -+mt -+necv70 -+powerpc -+sh -+sparc -+spu -+tic4x -+tic80 -+v850 -+w65 -+x86_64 -+xscale -+xstormy16 -+z8k' - - # Initialize some variables set by options. - ac_init_help= -@@ -525,34 +977,48 @@ - # and all the variables that are supposed to be based on exec_prefix - # by default will actually change. - # Use braces instead of parens because sh, perl, etc. also accept them. -+# (The list follows the same order as the GNU Coding Standards.) - bindir='${exec_prefix}/bin' - sbindir='${exec_prefix}/sbin' - libexecdir='${exec_prefix}/libexec' --datadir='${prefix}/share' -+datarootdir='${prefix}/share' -+datadir='${datarootdir}' - sysconfdir='${prefix}/etc' - sharedstatedir='${prefix}/com' - localstatedir='${prefix}/var' --libdir='${exec_prefix}/lib' - includedir='${prefix}/include' - oldincludedir='/usr/include' --infodir='${prefix}/info' --mandir='${prefix}/man' -+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -+infodir='${datarootdir}/info' -+htmldir='${docdir}' -+dvidir='${docdir}' -+pdfdir='${docdir}' -+psdir='${docdir}' -+libdir='${exec_prefix}/lib' -+localedir='${datarootdir}/locale' -+mandir='${datarootdir}/man' - - ac_prev= -+ac_dashdash= - for ac_option - do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then -- eval "$ac_prev=\$ac_option" -+ eval $ac_prev=\$ac_option - ac_prev= - continue - fi - -- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` -+ case $ac_option in -+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *) ac_optarg=yes ;; -+ esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - -- case $ac_option in -+ case $ac_dashdash$ac_option in -+ --) -+ ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; -@@ -574,33 +1040,45 @@ - --config-cache | -C) - cache_file=config.cache ;; - -- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) -+ -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; -- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ -- | --da=*) -+ -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - -+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ -+ | --dataroo | --dataro | --datar) -+ ac_prev=datarootdir ;; -+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ -+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) -+ datarootdir=$ac_optarg ;; -+ - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- eval "enable_$ac_feature=no" ;; -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=no ;; -+ -+ -docdir | --docdir | --docdi | --doc | --do) -+ ac_prev=docdir ;; -+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) -+ docdir=$ac_optarg ;; -+ -+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) -+ ac_prev=dvidir ;; -+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) -+ dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -- esac -- eval "enable_$ac_feature='$ac_optarg'" ;; -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -@@ -627,6 +1105,12 @@ - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - -+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) -+ ac_prev=htmldir ;; -+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ -+ | --ht=*) -+ htmldir=$ac_optarg ;; -+ - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; -@@ -651,13 +1135,16 @@ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - -+ -localedir | --localedir | --localedi | --localed | --locale) -+ ac_prev=localedir ;; -+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) -+ localedir=$ac_optarg ;; -+ - -localstatedir | --localstatedir | --localstatedi | --localstated \ -- | --localstate | --localstat | --localsta | --localst \ -- | --locals | --local | --loca | --loc | --lo) -+ | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ -- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ -- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) -+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) -@@ -722,6 +1209,16 @@ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - -+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) -+ ac_prev=pdfdir ;; -+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) -+ pdfdir=$ac_optarg ;; -+ -+ -psdir | --psdir | --psdi | --psd | --ps) -+ ac_prev=psdir ;; -+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) -+ psdir=$ac_optarg ;; -+ - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; -@@ -774,24 +1271,20 @@ - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package| sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -- esac -- eval "with_$ac_package='$ac_optarg'" ;; -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=\$ac_optarg ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package | sed 's/-/_/g'` -- eval "with_$ac_package=no" ;; -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=no ;; - - --x) - # Obsolete; use --with-x. -@@ -822,8 +1315,7 @@ - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } -- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` -- eval "$ac_envvar='$ac_optarg'" -+ eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) -@@ -843,27 +1335,19 @@ - { (exit 1); exit 1; }; } - fi - --# Be sure to have absolute paths. --for ac_var in exec_prefix prefix --do -- eval ac_val=$`echo $ac_var` -- case $ac_val in -- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -- esac --done -- --# Be sure to have absolute paths. --for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ -- localstatedir libdir includedir oldincludedir infodir mandir -+# Be sure to have absolute directory names. -+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ -+ datadir sysconfdir sharedstatedir localstatedir includedir \ -+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ -+ libdir localedir mandir - do -- eval ac_val=$`echo $ac_var` -+ eval ac_val=\$$ac_var - case $ac_val in -- [\\/$]* | ?:[\\/]* ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -+ [\\/$]* | ?:[\\/]* ) continue;; -+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac -+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; } - done - - # There might be people who depend on the old broken behavior: `$host' -@@ -890,82 +1374,76 @@ - test "$silent" = yes && exec 6>/dev/null - - -+ac_pwd=`pwd` && test -n "$ac_pwd" && -+ac_ls_di=`ls -di .` && -+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -+ { echo "$as_me: error: Working directory cannot be determined" >&2 -+ { (exit 1); exit 1; }; } -+test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -+ { echo "$as_me: error: pwd does not report name of working directory" >&2 -+ { (exit 1); exit 1; }; } -+ -+ - # Find the source files, if location was not specified. - if test -z "$srcdir"; then - ac_srcdir_defaulted=yes -- # Try the directory containing this script, then its parent. -- ac_confdir=`(dirname "$0") 2>/dev/null || -+ # Try the directory containing this script, then the parent directory. -+ ac_confdir=`$as_dirname -- "$0" || - $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || - echo X"$0" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - srcdir=$ac_confdir -- if test ! -r $srcdir/$ac_unique_file; then -+ if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi - else - ac_srcdir_defaulted=no - fi --if test ! -r $srcdir/$ac_unique_file; then -- if test "$ac_srcdir_defaulted" = yes; then -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 -- { (exit 1); exit 1; }; } -- else -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -- { (exit 1); exit 1; }; } -- fi --fi --(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || -- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 -- { (exit 1); exit 1; }; } --srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` --ac_env_build_alias_set=${build_alias+set} --ac_env_build_alias_value=$build_alias --ac_cv_env_build_alias_set=${build_alias+set} --ac_cv_env_build_alias_value=$build_alias --ac_env_host_alias_set=${host_alias+set} --ac_env_host_alias_value=$host_alias --ac_cv_env_host_alias_set=${host_alias+set} --ac_cv_env_host_alias_value=$host_alias --ac_env_target_alias_set=${target_alias+set} --ac_env_target_alias_value=$target_alias --ac_cv_env_target_alias_set=${target_alias+set} --ac_cv_env_target_alias_value=$target_alias --ac_env_CCAS_set=${CCAS+set} --ac_env_CCAS_value=$CCAS --ac_cv_env_CCAS_set=${CCAS+set} --ac_cv_env_CCAS_value=$CCAS --ac_env_CCASFLAGS_set=${CCASFLAGS+set} --ac_env_CCASFLAGS_value=$CCASFLAGS --ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set} --ac_cv_env_CCASFLAGS_value=$CCASFLAGS --ac_env_CC_set=${CC+set} --ac_env_CC_value=$CC --ac_cv_env_CC_set=${CC+set} --ac_cv_env_CC_value=$CC --ac_env_CFLAGS_set=${CFLAGS+set} --ac_env_CFLAGS_value=$CFLAGS --ac_cv_env_CFLAGS_set=${CFLAGS+set} --ac_cv_env_CFLAGS_value=$CFLAGS --ac_env_LDFLAGS_set=${LDFLAGS+set} --ac_env_LDFLAGS_value=$LDFLAGS --ac_cv_env_LDFLAGS_set=${LDFLAGS+set} --ac_cv_env_LDFLAGS_value=$LDFLAGS --ac_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_env_CPPFLAGS_value=$CPPFLAGS --ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_cv_env_CPPFLAGS_value=$CPPFLAGS --ac_env_CPP_set=${CPP+set} --ac_env_CPP_value=$CPP --ac_cv_env_CPP_set=${CPP+set} --ac_cv_env_CPP_value=$CPP -+if test ! -r "$srcdir/$ac_unique_file"; then -+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -+ac_abs_confdir=`( -+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 -+ { (exit 1); exit 1; }; } -+ pwd)` -+# When building in place, set srcdir=. -+if test "$ac_abs_confdir" = "$ac_pwd"; then -+ srcdir=. -+fi -+# Remove unnecessary trailing slashes from srcdir. -+# Double slashes in file names in object file debugging info -+# mess up M-x gdb in Emacs. -+case $srcdir in -+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -+esac -+for ac_var in $ac_precious_vars; do -+ eval ac_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_env_${ac_var}_value=\$${ac_var} -+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_cv_env_${ac_var}_value=\$${ac_var} -+done - - # - # Report the --help message. -@@ -994,9 +1472,6 @@ - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - --_ACEOF -- -- cat <<_ACEOF - Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] -@@ -1014,15 +1489,22 @@ - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] -- --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] -- --infodir=DIR info documentation [PREFIX/info] -- --mandir=DIR man documentation [PREFIX/man] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] - _ACEOF - - cat <<\_ACEOF -@@ -1059,10 +1541,8 @@ - --enable-dependency-tracking do not reject slow dependency extractors - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer -- --enable-shared[=PKGS] -- build shared libraries [default=yes] -- --enable-static[=PKGS] -- build static libraries [default=yes] -+ --enable-shared[=PKGS] build shared libraries [default=yes] -+ --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) -@@ -1081,128 +1561,95 @@ - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> -- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have -- headers in a nonstandard directory <include dir> -+ LIBS libraries to pass to the linker, e.g. -l<library> -+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if -+ you have headers in a nonstandard directory <include dir> - CPP C preprocessor - - Use these variables to override the choices made by `configure' or to help - it to find libraries and programs with nonstandard names/locations. - - _ACEOF -+ac_status=$? - fi - - if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. -- ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -- test -d $ac_dir || continue -+ test -d "$ac_dir" || continue - ac_builddir=. - --if test "$ac_dir" != .; then -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -- --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; - esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - -- cd $ac_dir -- # Check for guested configure; otherwise get Cygnus style configure. -- if test -f $ac_srcdir/configure.gnu; then -- echo -- $SHELL $ac_srcdir/configure.gnu --help=recursive -- elif test -f $ac_srcdir/configure; then -- echo -- $SHELL $ac_srcdir/configure --help=recursive -- elif test -f $ac_srcdir/configure.ac || -- test -f $ac_srcdir/configure.in; then -- echo -- $ac_configure --help -+ cd "$ac_dir" || { ac_status=$?; continue; } -+ # Check for guested configure. -+ if test -f "$ac_srcdir/configure.gnu"; then -+ echo && -+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive -+ elif test -f "$ac_srcdir/configure"; then -+ echo && -+ $SHELL "$ac_srcdir/configure" --help=recursive - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -- fi -- cd $ac_popdir -+ fi || ac_status=$? -+ cd "$ac_pwd" || { ac_status=$?; break; } - done - fi - --test -n "$ac_init_help" && exit 0 -+test -n "$ac_init_help" && exit $ac_status - if $ac_init_version; then - cat <<\_ACEOF - newlib configure 1.17.0 --generated by GNU Autoconf 2.59 -+generated by GNU Autoconf 2.61 - --Copyright (C) 2003 Free Software Foundation, Inc. -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - This configure script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it. - _ACEOF -- exit 0 -+ exit - fi --exec 5>config.log --cat >&5 <<_ACEOF -+cat >config.log <<_ACEOF - This file contains any messages produced by compilers while - running configure, to aid debugging if configure makes a mistake. - - It was created by newlib $as_me 1.17.0, which was --generated by GNU Autoconf 2.59. Invocation command line was -+generated by GNU Autoconf 2.61. Invocation command line was - - $ $0 $@ - - _ACEOF -+exec 5>>config.log - { - cat <<_ASUNAME - ## --------- ## -@@ -1221,7 +1668,7 @@ - /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` - /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` - /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` --hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` - /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` - /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` - /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -@@ -1235,6 +1682,7 @@ - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" - done -+IFS=$as_save_IFS - - } >&5 - -@@ -1256,7 +1704,6 @@ - ac_configure_args= - ac_configure_args0= - ac_configure_args1= --ac_sep= - ac_must_keep_next=false - for ac_pass in 1 2 - do -@@ -1267,7 +1714,7 @@ - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -+ *\'*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in -@@ -1289,9 +1736,7 @@ - -* ) ac_must_keep_next=true ;; - esac - fi -- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" -- # Get rid of the leading space. -- ac_sep=" " -+ ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -@@ -1302,8 +1747,8 @@ - # When interrupted or exit'd, cleanup temporary files, and complete - # config.log. We remove comments because anyway the quotes in there - # would cause problems or look ugly. --# WARNING: Be sure not to use single quotes in there, as some shells, --# such as our DU 5.0 friend, will then `close' the trap. -+# WARNING: Use '\'' to represent an apostrophe within the trap. -+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. - trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { -@@ -1316,20 +1761,34 @@ - _ASBOX - echo - # The following way of writing the cache mishandles newlines in values, --{ -+( -+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done - (set) 2>&1 | -- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) - sed -n \ -- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; -- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" -- ;; -+ "s/'\''/'\''\\\\'\'''\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" -+ ;; #( - *) -- sed -n \ -- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; -- esac; --} -+ esac | -+ sort -+) - echo - - cat <<\_ASBOX -@@ -1340,22 +1799,28 @@ - echo - for ac_var in $ac_subst_vars - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX --## ------------- ## --## Output files. ## --## ------------- ## -+## ------------------- ## -+## File substitutions. ## -+## ------------------- ## - _ASBOX - echo - for ac_var in $ac_subst_files - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi -@@ -1367,26 +1832,24 @@ - ## ----------- ## - _ASBOX - echo -- sed "/^$/d" confdefs.h | sort -+ cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 -- rm -f core *.core && -- rm -rf conftest* confdefs* conf$$* $ac_clean_files && -+ rm -f core *.core core.conftest.* && -+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -- ' 0 -+' 0 - for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal - done - ac_signal=0 - - # confdefs.h avoids OS command line length limits that DEFS can exceed. --rm -rf conftest* confdefs.h --# AIX cpp loses on an empty file, so make sure it contains at least a newline. --echo >confdefs.h -+rm -f -r conftest* confdefs.h - - # Predefined preprocessor variables. - -@@ -1417,14 +1880,17 @@ - - # Let the site file select an alternate cache file if it wants to. - # Prefer explicitly selected file to automatically selected ones. --if test -z "$CONFIG_SITE"; then -- if test "x$prefix" != xNONE; then -- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" -- else -- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" -- fi -+if test -n "$CONFIG_SITE"; then -+ set x "$CONFIG_SITE" -+elif test "x$prefix" != xNONE; then -+ set x "$prefix/share/config.site" "$prefix/etc/config.site" -+else -+ set x "$ac_default_prefix/share/config.site" \ -+ "$ac_default_prefix/etc/config.site" - fi --for ac_site_file in $CONFIG_SITE; do -+shift -+for ac_site_file -+do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 - echo "$as_me: loading site script $ac_site_file" >&6;} -@@ -1440,8 +1906,8 @@ - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 - echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in -- [\\/]* | ?:[\\/]* ) . $cache_file;; -- *) . ./$cache_file;; -+ [\\/]* | ?:[\\/]* ) . "$cache_file";; -+ *) . "./$cache_file";; - esac - fi - else -@@ -1453,12 +1919,11 @@ - # Check that the precious variables saved in the cache have kept the same - # value. - ac_cache_corrupted=false --for ac_var in `(set) 2>&1 | -- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do -+for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set -- eval ac_old_val="\$ac_cv_env_${ac_var}_value" -- eval ac_new_val="\$ac_env_${ac_var}_value" -+ eval ac_old_val=\$ac_cv_env_${ac_var}_value -+ eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -@@ -1483,8 +1948,7 @@ - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in -@@ -1501,12 +1965,6 @@ - { (exit 1); exit 1; }; } - fi - --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu -- - - - -@@ -1531,67 +1989,92 @@ - - - -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - ac_aux_dir= --for ac_dir in ../../.. $srcdir/../../..; do -- if test -f $ac_dir/install-sh; then -+for ac_dir in ../../.. "$srcdir"/../../..; do -+ if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break -- elif test -f $ac_dir/install.sh; then -+ elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break -- elif test -f $ac_dir/shtool; then -+ elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi - done - if test -z "$ac_aux_dir"; then -- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5 --echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;} -+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5 -+echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;} - { (exit 1); exit 1; }; } - fi --ac_config_guess="$SHELL $ac_aux_dir/config.guess" --ac_config_sub="$SHELL $ac_aux_dir/config.sub" --ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. -+ -+# These three variables are undocumented and unsupported, -+# and are intended to be withdrawn in a future Autoconf release. -+# They can cause serious problems if a builder's source tree is in a directory -+# whose full name contains unusual characters. -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -+ - - - - # Make sure we can run config.sub. --$ac_config_sub sun4 >/dev/null 2>&1 || -- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 --echo "$as_me: error: cannot run $ac_config_sub" >&2;} -+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } - --echo "$as_me:$LINENO: checking build system type" >&5 --echo $ECHO_N "checking build system type... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking build system type" >&5 -+echo $ECHO_N "checking build system type... $ECHO_C" >&6; } - if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_cv_build_alias=$build_alias --test -z "$ac_cv_build_alias" && -- ac_cv_build_alias=`$ac_config_guess` --test -z "$ac_cv_build_alias" && -+ ac_build_alias=$build_alias -+test "x$ac_build_alias" = x && -+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -+test "x$ac_build_alias" = x && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 - echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } --ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} -+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - - fi --echo "$as_me:$LINENO: result: $ac_cv_build" >&5 --echo "${ECHO_T}$ac_cv_build" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -+echo "${ECHO_T}$ac_cv_build" >&6; } -+case $ac_cv_build in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -+echo "$as_me: error: invalid value of canonical build" >&2;} -+ { (exit 1); exit 1; }; };; -+esac - build=$ac_cv_build --build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` --build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` --build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_build -+shift -+build_cpu=$1 -+build_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+build_os=$* -+IFS=$ac_save_IFS -+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - - am__api_version="1.9" -@@ -1608,8 +2091,8 @@ - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } - if test -z "$INSTALL"; then - if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -@@ -1631,7 +2114,7 @@ - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. -@@ -1650,21 +2133,22 @@ - ;; - esac - done -+IFS=$as_save_IFS - - - fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else -- # As a last resort, use the slow shell script. We don't cache a -- # path for INSTALL within a source directory, because that will -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is -- # removed, or if the path is relative. -+ # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. -@@ -1674,8 +2158,8 @@ - - test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - --echo "$as_me:$LINENO: checking whether build environment is sane" >&5 --echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } - # Just in case - sleep 1 - echo timestamp > conftest.file -@@ -1717,20 +2201,20 @@ - Check your system clock" >&2;} - { (exit 1); exit 1; }; } - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - test "$program_prefix" != NONE && -- program_transform_name="s,^,$program_prefix,;$program_transform_name" -+ program_transform_name="s&^&$program_prefix&;$program_transform_name" - # Use a double $ so make ignores it. - test "$program_suffix" != NONE && -- program_transform_name="s,\$,$program_suffix,;$program_transform_name" -+ program_transform_name="s&\$&$program_suffix&;$program_transform_name" - # Double any \ or $. echo might interpret backslashes. - # By default was `s,x,x', remove it if useless. - cat <<\_ACEOF >conftest.sed - s/[\\$]/&&/g;s/;s,x,x,$// - _ACEOF - program_transform_name=`echo $program_transform_name | sed -f conftest.sed` --rm conftest.sed -+rm -f conftest.sed - - # expand $ac_aux_dir to an absolute path - am_aux_dir=`cd $ac_aux_dir && pwd` -@@ -1782,8 +2266,8 @@ - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -1796,54 +2280,57 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AWK=$ac_cv_prog_AWK - if test -n "$AWK"; then -- echo "$as_me:$LINENO: result: $AWK" >&5 --echo "${ECHO_T}$AWK" >&6 -+ { echo "$as_me:$LINENO: result: $AWK" >&5 -+echo "${ECHO_T}$AWK" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$AWK" && break - done - --echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 --echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 --set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` --if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then -+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - cat >conftest.make <<\_ACEOF -+SHELL = /bin/sh - all: -- @echo 'ac_maketemp="$(MAKE)"' -+ @echo '@@@%%%=$(MAKE)=@@@%%%' - _ACEOF - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. --eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` --if test -n "$ac_maketemp"; then -- eval ac_cv_prog_make_${ac_make}_set=yes --else -- eval ac_cv_prog_make_${ac_make}_set=no --fi -+case `${MAKE-make} -f conftest.make 2>/dev/null` in -+ *@@@%%%=?*=@@@%%%*) -+ eval ac_cv_prog_make_${ac_make}_set=yes;; -+ *) -+ eval ac_cv_prog_make_${ac_make}_set=no;; -+esac - rm -f conftest.make - fi --if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - SET_MAKE= - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" - fi - -@@ -1858,7 +2345,7 @@ - - DEPDIR="${am__leading_dot}deps" - -- ac_config_commands="$ac_config_commands depfiles" -+ac_config_commands="$ac_config_commands depfiles" - - - am_make=${MAKE-make} -@@ -1868,8 +2355,8 @@ - .PHONY: am__doit - END - # If we don't find an include directive, just comment out the code. --echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 --echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } - am__include="#" - am__quote= - _am_result=none -@@ -1896,15 +2383,15 @@ - fi - - --echo "$as_me:$LINENO: result: $_am_result" >&5 --echo "${ECHO_T}$_am_result" >&6 -+{ echo "$as_me:$LINENO: result: $_am_result" >&5 -+echo "${ECHO_T}$_am_result" >&6; } - rm -f confinc confmf - --# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -+# Check whether --enable-dependency-tracking was given. - if test "${enable_dependency_tracking+set}" = set; then -- enableval="$enable_dependency_tracking" -+ enableval=$enable_dependency_tracking; -+fi - --fi; - if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -@@ -1922,10 +2409,9 @@ - - - --# Check whether --enable-multilib or --disable-multilib was given. -+# Check whether --enable-multilib was given. - if test "${enable_multilib+set}" = set; then -- enableval="$enable_multilib" -- case "${enableval}" in -+ enableval=$enable_multilib; case "${enableval}" in - yes) multilib=yes ;; - no) multilib=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 -@@ -1934,11 +2420,11 @@ - esac - else - multilib=yes --fi; --# Check whether --enable-target-optspace or --disable-target-optspace was given. -+fi -+ -+# Check whether --enable-target-optspace was given. - if test "${enable_target_optspace+set}" = set; then -- enableval="$enable_target_optspace" -- case "${enableval}" in -+ enableval=$enable_target_optspace; case "${enableval}" in - yes) target_optspace=yes ;; - no) target_optspace=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 -@@ -1947,11 +2433,11 @@ - esac - else - target_optspace= --fi; --# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. -+fi -+ -+# Check whether --enable-malloc-debugging was given. - if test "${enable_malloc_debugging+set}" = set; then -- enableval="$enable_malloc_debugging" -- case "${enableval}" in -+ enableval=$enable_malloc_debugging; case "${enableval}" in - yes) malloc_debugging=yes ;; - no) malloc_debugging=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 -@@ -1960,11 +2446,11 @@ - esac - else - malloc_debugging= --fi; --# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. -+fi -+ -+# Check whether --enable-newlib-multithread was given. - if test "${enable_newlib_multithread+set}" = set; then -- enableval="$enable_newlib_multithread" -- case "${enableval}" in -+ enableval=$enable_newlib_multithread; case "${enableval}" in - yes) newlib_multithread=yes ;; - no) newlib_multithread=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 -@@ -1973,11 +2459,11 @@ - esac - else - newlib_multithread=yes --fi; --# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. -+fi -+ -+# Check whether --enable-newlib-iconv was given. - if test "${enable_newlib_iconv+set}" = set; then -- enableval="$enable_newlib_iconv" -- if test "${newlib_iconv+set}" != set; then -+ enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then - case "${enableval}" in - yes) newlib_iconv=yes ;; - no) newlib_iconv=no ;; -@@ -1988,11 +2474,11 @@ - fi - else - newlib_iconv=${newlib_iconv} --fi; --# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. -+fi -+ -+# Check whether --enable-newlib-elix-level was given. - if test "${enable_newlib_elix_level+set}" = set; then -- enableval="$enable_newlib_elix_level" -- case "${enableval}" in -+ enableval=$enable_newlib_elix_level; case "${enableval}" in - 0) newlib_elix_level=0 ;; - 1) newlib_elix_level=1 ;; - 2) newlib_elix_level=2 ;; -@@ -2004,11 +2490,11 @@ - esac - else - newlib_elix_level=0 --fi; --# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. -+fi -+ -+# Check whether --enable-newlib-io-float was given. - if test "${enable_newlib_io_float+set}" = set; then -- enableval="$enable_newlib_io_float" -- case "${enableval}" in -+ enableval=$enable_newlib_io_float; case "${enableval}" in - yes) newlib_io_float=yes ;; - no) newlib_io_float=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 -@@ -2017,11 +2503,11 @@ - esac - else - newlib_io_float=yes --fi; --# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. -+fi -+ -+# Check whether --enable-newlib-supplied-syscalls was given. - if test "${enable_newlib_supplied_syscalls+set}" = set; then -- enableval="$enable_newlib_supplied_syscalls" -- case "${enableval}" in -+ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in - yes) newlib_may_supply_syscalls=yes ;; - no) newlib_may_supply_syscalls=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 -@@ -2030,7 +2516,8 @@ - esac - else - newlib_may_supply_syscalls=yes --fi; -+fi -+ - - - if test x${newlib_may_supply_syscalls} = xyes; then -@@ -2056,26 +2543,41 @@ - fi - - --echo "$as_me:$LINENO: checking host system type" >&5 --echo $ECHO_N "checking host system type... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking host system type" >&5 -+echo $ECHO_N "checking host system type... $ECHO_C" >&6; } - if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_cv_host_alias=$host_alias --test -z "$ac_cv_host_alias" && -- ac_cv_host_alias=$ac_cv_build_alias --ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} -+ if test "x$host_alias" = x; then -+ ac_cv_host=$ac_cv_build -+else -+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } -+fi - - fi --echo "$as_me:$LINENO: result: $ac_cv_host" >&5 --echo "${ECHO_T}$ac_cv_host" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -+echo "${ECHO_T}$ac_cv_host" >&6; } -+case $ac_cv_host in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -+echo "$as_me: error: invalid value of canonical host" >&2;} -+ { (exit 1); exit 1; }; };; -+esac - host=$ac_cv_host --host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` --host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` --host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_host -+shift -+host_cpu=$1 -+host_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+host_os=$* -+IFS=$ac_save_IFS -+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - -@@ -2128,8 +2630,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. - set dummy ${ac_tool_prefix}strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2142,32 +2644,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - STRIP=$ac_cv_prog_STRIP - if test -n "$STRIP"; then -- echo "$as_me:$LINENO: result: $STRIP" >&5 --echo "${ECHO_T}$STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $STRIP" >&5 -+echo "${ECHO_T}$STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. - set dummy strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2180,27 +2684,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" - fi - fi - ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP - if test -n "$ac_ct_STRIP"; then -- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 --echo "${ECHO_T}$ac_ct_STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -+echo "${ECHO_T}$ac_ct_STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- STRIP=$ac_ct_STRIP -+ if test "x$ac_ct_STRIP" = x; then -+ STRIP=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ STRIP=$ac_ct_STRIP -+ fi - else - STRIP="$ac_cv_prog_STRIP" - fi -@@ -2235,8 +2753,8 @@ - - # Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2249,30 +2767,32 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -+ - depcc="$CC" am_compiler_list= - --echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 --echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } - if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2361,8 +2881,8 @@ - fi - - fi --echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 --echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } - CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -@@ -2381,8 +2901,8 @@ - if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2396,7 +2916,7 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue -@@ -2407,6 +2927,7 @@ - fi - done - done -+IFS=$as_save_IFS - - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. -@@ -2424,20 +2945,21 @@ - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 - echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} - { (exit 1); exit 1; }; } - fi - --echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 --echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 -+echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; } - if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2457,8 +2979,8 @@ - ac_cv_c_compiler_gnu=no - fi - fi --echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } - - if test $ac_cv_c_compiler_gnu = yes; then - GCC=yes -@@ -2467,13 +2989,16 @@ - CFLAGS= - ac_test_CFLAGS=${CFLAGS+set} - ac_save_CFLAGS=$CFLAGS --CFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 --echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } - if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- cat >conftest.$ac_ext <<_ACEOF -+ ac_save_c_werror_flag=$ac_c_werror_flag -+ ac_c_werror_flag=yes -+ ac_cv_prog_cc_g=no -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext -@@ -2489,38 +3014,118 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_g=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ CFLAGS="" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ : -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_c_werror_flag=$ac_save_c_werror_flag -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_prog_cc_g=no -+ -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_c_werror_flag=$ac_save_c_werror_flag - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } - if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS - elif test $ac_cv_prog_cc_g = yes; then -@@ -2552,8 +3157,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. - set dummy ${ac_tool_prefix}as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2566,32 +3171,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AS="${ac_tool_prefix}as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AS=$ac_cv_prog_AS - if test -n "$AS"; then -- echo "$as_me:$LINENO: result: $AS" >&5 --echo "${ECHO_T}$AS" >&6 -+ { echo "$as_me:$LINENO: result: $AS" >&5 -+echo "${ECHO_T}$AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. - set dummy as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2604,26 +3211,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AS="as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_AS=$ac_cv_prog_ac_ct_AS - if test -n "$ac_ct_AS"; then -- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 --echo "${ECHO_T}$ac_ct_AS" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -+echo "${ECHO_T}$ac_ct_AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AS=$ac_ct_AS -+ if test "x$ac_ct_AS" = x; then -+ AS="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AS=$ac_ct_AS -+ fi - else - AS="$ac_cv_prog_AS" - fi -@@ -2631,8 +3253,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. - set dummy ${ac_tool_prefix}ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2645,32 +3267,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AR=$ac_cv_prog_AR - if test -n "$AR"; then -- echo "$as_me:$LINENO: result: $AR" >&5 --echo "${ECHO_T}$AR" >&6 -+ { echo "$as_me:$LINENO: result: $AR" >&5 -+echo "${ECHO_T}$AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. - set dummy ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2683,26 +3307,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_AR=$ac_cv_prog_ac_ct_AR - if test -n "$ac_ct_AR"; then -- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 --echo "${ECHO_T}$ac_ct_AR" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -+echo "${ECHO_T}$ac_ct_AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AR=$ac_ct_AR -+ if test "x$ac_ct_AR" = x; then -+ AR="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AR=$ac_ct_AR -+ fi - else - AR="$ac_cv_prog_AR" - fi -@@ -2710,8 +3349,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. - set dummy ${ac_tool_prefix}ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2724,32 +3363,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - RANLIB=$ac_cv_prog_RANLIB - if test -n "$RANLIB"; then -- echo "$as_me:$LINENO: result: $RANLIB" >&5 --echo "${ECHO_T}$RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $RANLIB" >&5 -+echo "${ECHO_T}$RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. - set dummy ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2762,27 +3403,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" - fi - fi - ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB - if test -n "$ac_ct_RANLIB"; then -- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 --echo "${ECHO_T}$ac_ct_RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -+echo "${ECHO_T}$ac_ct_RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- RANLIB=$ac_ct_RANLIB -+ if test "x$ac_ct_RANLIB" = x; then -+ RANLIB=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ RANLIB=$ac_ct_RANLIB -+ fi - else - RANLIB="$ac_cv_prog_RANLIB" - fi -@@ -2790,8 +3445,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. - set dummy ${ac_tool_prefix}readelf; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_READELF+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2804,32 +3459,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_READELF="${ac_tool_prefix}readelf" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - READELF=$ac_cv_prog_READELF - if test -n "$READELF"; then -- echo "$as_me:$LINENO: result: $READELF" >&5 --echo "${ECHO_T}$READELF" >&6 -+ { echo "$as_me:$LINENO: result: $READELF" >&5 -+echo "${ECHO_T}$READELF" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_READELF"; then - ac_ct_READELF=$READELF - # Extract the first word of "readelf", so it can be a program name with args. - set dummy readelf; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2842,27 +3499,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_READELF="readelf" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":" - fi - fi - ac_ct_READELF=$ac_cv_prog_ac_ct_READELF - if test -n "$ac_ct_READELF"; then -- echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 --echo "${ECHO_T}$ac_ct_READELF" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 -+echo "${ECHO_T}$ac_ct_READELF" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- READELF=$ac_ct_READELF -+ if test "x$ac_ct_READELF" = x; then -+ READELF=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ READELF=$ac_ct_READELF -+ fi - else - READELF="$ac_cv_prog_READELF" - fi -@@ -2881,8 +3552,8 @@ - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } - if test -z "$INSTALL"; then - if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -@@ -2904,7 +3575,7 @@ - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. -@@ -2923,21 +3594,22 @@ - ;; - esac - done -+IFS=$as_save_IFS - - - fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else -- # As a last resort, use the slow shell script. We don't cache a -- # path for INSTALL within a source directory, because that will -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is -- # removed, or if the path is relative. -+ # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. -@@ -2951,17 +3623,17 @@ - # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */ - ac_given_INSTALL=$INSTALL - --echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 --echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 -- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. -+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } -+ # Check whether --enable-maintainer-mode was given. - if test "${enable_maintainer_mode+set}" = set; then -- enableval="$enable_maintainer_mode" -- USE_MAINTAINER_MODE=$enableval -+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval - else - USE_MAINTAINER_MODE=no --fi; -- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 --echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 -+fi -+ -+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } - - - if test $USE_MAINTAINER_MODE = yes; then -@@ -3081,64 +3753,89 @@ - - - --echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 --echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 --if test "${lt_cv_path_SED+set}" = set; then -+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } -+if test "${ac_cv_path_SED+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ -+ for ac_i in 1 2 3 4 5 6 7; do -+ ac_script="$ac_script$as_nl$ac_script" -+ done -+ echo "$ac_script" | sed 99q >conftest.sed -+ $as_unset ac_script || ac_script= -+ # Extract the first word of "sed gsed" to use in msg output -+if test -z "$SED"; then -+set dummy sed gsed; ac_prog_name=$2 -+if test "${ac_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- # Loop through the user's path and test for sed and gsed. --# Then use that list of sed's as ones to test for truncation. -+ ac_path_SED_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for lt_ac_prog in sed gsed; do -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then -- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" -- fi -- done -- done --done --IFS=$as_save_IFS --lt_ac_max=0 --lt_ac_count=0 --# Add /usr/xpg4/bin/sed as it is typically found on Solaris --# along with /bin/sed that truncates output. --for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do -- test ! -f $lt_ac_sed && continue -- cat /dev/null > conftest.in -- lt_ac_count=0 -- echo $ECHO_N "0123456789$ECHO_C" >conftest.in -- # Check for GNU sed and select it if it is found. -- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then -- lt_cv_path_SED=$lt_ac_sed -- break -- fi -- while true; do -- cat conftest.in conftest.in >conftest.tmp -- mv conftest.tmp conftest.in -- cp conftest.in conftest.nl -- echo >>conftest.nl -- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break -- cmp -s conftest.out conftest.nl || break -- # 10000 chars as input seems more than enough -- test $lt_ac_count -gt 10 && break -- lt_ac_count=`expr $lt_ac_count + 1` -- if test $lt_ac_count -gt $lt_ac_max; then -- lt_ac_max=$lt_ac_count -- lt_cv_path_SED=$lt_ac_sed -+ for ac_prog in sed gsed; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -+ # Check for GNU ac_path_SED and select it if it is found. -+ # Check for GNU $ac_path_SED -+case `"$ac_path_SED" --version 2>&1` in -+*GNU*) -+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo '' >> "conftest.nl" -+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_SED_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_SED="$ac_path_SED" -+ ac_path_SED_max=$ac_count - fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ -+ $ac_path_SED_found && break 3 - done - done - -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ -+SED="$ac_cv_path_SED" -+if test -z "$SED"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} -+ { (exit 1); exit 1; }; } - fi - --SED=$lt_cv_path_SED -+else -+ ac_cv_path_SED=$SED -+fi - --echo "$as_me:$LINENO: result: $SED" >&5 --echo "${ECHO_T}$SED" >&6 -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 -+echo "${ECHO_T}$ac_cv_path_SED" >&6; } -+ SED="$ac_cv_path_SED" -+ rm -f conftest.sed - - test -z "$SED" && SED=sed - Xsed="$SED -e 1s/^X//" -@@ -3161,8 +3858,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. - set dummy ${ac_tool_prefix}as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3175,32 +3872,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AS="${ac_tool_prefix}as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AS=$ac_cv_prog_AS - if test -n "$AS"; then -- echo "$as_me:$LINENO: result: $AS" >&5 --echo "${ECHO_T}$AS" >&6 -+ { echo "$as_me:$LINENO: result: $AS" >&5 -+echo "${ECHO_T}$AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. - set dummy as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3213,27 +3912,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AS="as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false" - fi - fi - ac_ct_AS=$ac_cv_prog_ac_ct_AS - if test -n "$ac_ct_AS"; then -- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 --echo "${ECHO_T}$ac_ct_AS" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -+echo "${ECHO_T}$ac_ct_AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AS=$ac_ct_AS -+ if test "x$ac_ct_AS" = x; then -+ AS="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AS=$ac_ct_AS -+ fi - else - AS="$ac_cv_prog_AS" - fi -@@ -3241,8 +3954,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. - set dummy ${ac_tool_prefix}dlltool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_DLLTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3255,32 +3968,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - DLLTOOL=$ac_cv_prog_DLLTOOL - if test -n "$DLLTOOL"; then -- echo "$as_me:$LINENO: result: $DLLTOOL" >&5 --echo "${ECHO_T}$DLLTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 -+echo "${ECHO_T}$DLLTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. - set dummy dlltool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3293,27 +4008,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false" - fi - fi - ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL - if test -n "$ac_ct_DLLTOOL"; then -- echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 --echo "${ECHO_T}$ac_ct_DLLTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 -+echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- DLLTOOL=$ac_ct_DLLTOOL -+ if test "x$ac_ct_DLLTOOL" = x; then -+ DLLTOOL="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ DLLTOOL=$ac_ct_DLLTOOL -+ fi - else - DLLTOOL="$ac_cv_prog_DLLTOOL" - fi -@@ -3321,8 +4050,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. - set dummy ${ac_tool_prefix}objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3335,32 +4064,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OBJDUMP=$ac_cv_prog_OBJDUMP - if test -n "$OBJDUMP"; then -- echo "$as_me:$LINENO: result: $OBJDUMP" >&5 --echo "${ECHO_T}$OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -+echo "${ECHO_T}$OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. - set dummy objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3373,27 +4104,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" - fi - fi - ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP - if test -n "$ac_ct_OBJDUMP"; then -- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 --echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OBJDUMP=$ac_ct_OBJDUMP -+ if test "x$ac_ct_OBJDUMP" = x; then -+ OBJDUMP="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OBJDUMP=$ac_ct_OBJDUMP -+ fi - else - OBJDUMP="$ac_cv_prog_OBJDUMP" - fi -@@ -3454,8 +4199,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. - set dummy ${ac_tool_prefix}gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3468,32 +4213,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3506,36 +4253,51 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - else - CC="$ac_cv_prog_CC" - fi - - if test -z "$CC"; then -- if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. - set dummy ${ac_tool_prefix}cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3548,98 +4310,59 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ -+ fi - fi --if test -z "$ac_cv_prog_CC"; then -- ac_ct_CC=$CC -+if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- if test -n "$ac_ct_CC"; then -- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. - else -+ ac_prog_rejected=no - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- --fi --fi --ac_ct_CC=$ac_cv_prog_ac_ct_CC --if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- -- CC=$ac_ct_CC --else -- CC="$ac_cv_prog_CC" --fi -- --fi --if test -z "$CC"; then -- # Extract the first word of "cc", so it can be a program name with args. --set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$CC"; then -- ac_cv_prog_CC="$CC" # Let the user override the test. --else -- ac_prog_rejected=no --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -- ac_prog_rejected=yes -- continue -- fi -- ac_cv_prog_CC="cc" -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -+ ac_prog_rejected=yes -+ continue -+ fi -+ ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. -@@ -3657,22 +4380,23 @@ - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3685,36 +4409,38 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$CC" && break - done - fi - if test -z "$CC"; then - ac_ct_CC=$CC -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3727,29 +4453,45 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$ac_ct_CC" && break - done - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - fi - - fi -@@ -3762,21 +4504,35 @@ - { (exit 1); exit 1; }; } - - # Provide some information about the compiler. --echo "$as_me:$LINENO:" \ -- "checking for C compiler version" >&5 -+echo "$as_me:$LINENO: checking for C compiler version" >&5 - ac_compiler=`set X $ac_compile; echo $2` --{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 -- (eval $ac_compiler --version </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler --version >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 -- (eval $ac_compiler -v </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler -v >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 -- (eval $ac_compiler -V </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler -V >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -@@ -3801,47 +4557,77 @@ - # Try to create an executable without -o first, disregard a.out. - # It will help us diagnose broken compilers, and finding out an intuition - # of exeext. --echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 --echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } - ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` --if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 -- (eval $ac_link_default) 2>&5 -+# -+# List of possible output files, starting from the most likely. -+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) -+# only as a last resort. b.out is created by i960 compilers. -+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' -+# -+# The IRIX 6 linker writes into existing files which may not be -+# executable, retaining their permissions. Remove them first so a -+# subsequent execution test works. -+ac_rmfiles= -+for ac_file in $ac_files -+do -+ case $ac_file in -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; -+ * ) ac_rmfiles="$ac_rmfiles $ac_file";; -+ esac -+done -+rm -f $ac_rmfiles -+ -+if { (ac_try="$ac_link_default" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link_default") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -- # Find the output, starting from the most likely. This scheme is --# not robust to junk in `.', hence go to wildcards (a.*) only as a last --# resort. -- --# Be careful to initialize this variable, since it used to be cached. --# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. --ac_cv_exeext= --# b.out is created by i960 compilers. --for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -+# in a Makefile. We should not override ac_cv_exeext if it was cached, -+# so that the user can short-circuit this test for compilers unknown to -+# Autoconf. -+for ac_file in $ac_files '' - do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) -- ;; -- conftest.$ac_ext ) -- # This is the source file. -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) -- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- # FIXME: I believe we export ac_cv_exeext for Libtool, -- # but it would be cool to find out if it's true. Does anybody -- # maintain Libtool? --akim. -- export ac_cv_exeext -+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; -+ then :; else -+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -+ fi -+ # We set ac_cv_exeext here because the later test for it is not -+ # safe: cross compilers may not add the suffix if given an `-o' -+ # argument, so we may need to know it at that point already. -+ # Even if this section looks crufty: it has the advantage of -+ # actually working. - break;; - * ) - break;; - esac - done -+test "$ac_cv_exeext" = no && ac_cv_exeext= -+ - else -+ ac_file='' -+fi -+ -+{ echo "$as_me:$LINENO: result: $ac_file" >&5 -+echo "${ECHO_T}$ac_file" >&6; } -+if test -z "$ac_file"; then - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -@@ -3853,19 +4639,21 @@ - fi - - ac_exeext=$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_file" >&5 --echo "${ECHO_T}$ac_file" >&6 - --# Check the compiler produces executables we can run. If not, either -+# Check that the compiler produces executables we can run. If not, either - # the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether the C compiler works" >&5 --echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } - # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 - # If not cross compiling, check that we can run a simple program. - if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ { (case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -@@ -3884,22 +4672,27 @@ - fi - fi - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - - rm -f a.out a.exe conftest$ac_cv_exeext b.out - ac_clean_files=$ac_clean_files_save --# Check the compiler produces executables we can run. If not, either -+# Check that the compiler produces executables we can run. If not, either - # the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 --echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 --echo "$as_me:$LINENO: result: $cross_compiling" >&5 --echo "${ECHO_T}$cross_compiling" >&6 -- --echo "$as_me:$LINENO: checking for suffix of executables" >&5 --echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } -+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 -+echo "${ECHO_T}$cross_compiling" >&6; } -+ -+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 -+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -@@ -3910,9 +4703,8 @@ - for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- export ac_cv_exeext - break;; - * ) break;; - esac -@@ -3926,14 +4718,14 @@ - fi - - rm -f conftest$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 --echo "${ECHO_T}$ac_cv_exeext" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -+echo "${ECHO_T}$ac_cv_exeext" >&6; } - - rm -f conftest.$ac_ext - EXEEXT=$ac_cv_exeext - ac_exeext=$EXEEXT --echo "$as_me:$LINENO: checking for suffix of object files" >&5 --echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 -+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } - if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3953,14 +4745,20 @@ - } - _ACEOF - rm -f conftest.o conftest.obj --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do -+ for ac_file in conftest.o conftest.obj conftest.*; do -+ test -f "$ac_file" || continue; - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -@@ -3978,12 +4776,12 @@ - - rm -f conftest.$ac_cv_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 --echo "${ECHO_T}$ac_cv_objext" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -+echo "${ECHO_T}$ac_cv_objext" >&6; } - OBJEXT=$ac_cv_objext - ac_objext=$OBJEXT --echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 --echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } - if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4006,50 +4804,49 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_compiler_gnu=no -+ ac_compiler_gnu=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_c_compiler_gnu=$ac_compiler_gnu - - fi --echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } - GCC=`test $ac_compiler_gnu = yes && echo yes` - ac_test_CFLAGS=${CFLAGS+set} - ac_save_CFLAGS=$CFLAGS --CFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 --echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } - if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- cat >conftest.$ac_ext <<_ACEOF -+ ac_save_c_werror_flag=$ac_c_werror_flag -+ ac_c_werror_flag=yes -+ ac_cv_prog_cc_g=no -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext -@@ -4065,38 +4862,118 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_g=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ CFLAGS="" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ : -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_c_werror_flag=$ac_save_c_werror_flag -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_prog_cc_g=no -+ - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_c_werror_flag=$ac_save_c_werror_flag - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } - if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS - elif test $ac_cv_prog_cc_g = yes; then -@@ -4112,12 +4989,12 @@ - CFLAGS= - fi - fi --echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 --echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 --if test "${ac_cv_prog_cc_stdc+set}" = set; then -+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -+if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_cv_prog_cc_stdc=no -+ ac_cv_prog_cc_c89=no - ac_save_CC=$CC - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -4151,12 +5028,17 @@ - /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated -- as 'x'. The following induces an error, until -std1 is added to get -+ as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something -- that's true only with -std1. */ -+ that's true only with -std. */ - int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters -+ inside strings and character constants. */ -+#define FOO(x) 'x' -+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; -+ - int test (int i, double x); - struct s1 {int (*f) (int a);}; - struct s2 {int (*f) (double a);}; -@@ -4171,205 +5053,57 @@ - return 0; - } - _ACEOF --# Don't try gcc -ansi; that turns off useful extensions and --# breaks some systems' header files. --# AIX -qlanglvl=ansi --# Ultrix and OSF/1 -std1 --# HP-UX 10.20 and later -Ae --# HP-UX older versions -Aa -D_HPUX_SOURCE --# SVR4 -Xc -D__EXTENSIONS__ --for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" - do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_prog_cc_stdc=$ac_arg --break -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_c89=$ac_arg - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext -+ -+rm -f core conftest.err conftest.$ac_objext -+ test "x$ac_cv_prog_cc_c89" != "xno" && break - done --rm -f conftest.$ac_ext conftest.$ac_objext -+rm -f conftest.$ac_ext - CC=$ac_save_CC - - fi -- --case "x$ac_cv_prog_cc_stdc" in -- x|xno) -- echo "$as_me:$LINENO: result: none needed" >&5 --echo "${ECHO_T}none needed" >&6 ;; -+# AC_CACHE_VAL -+case "x$ac_cv_prog_cc_c89" in -+ x) -+ { echo "$as_me:$LINENO: result: none needed" >&5 -+echo "${ECHO_T}none needed" >&6; } ;; -+ xno) -+ { echo "$as_me:$LINENO: result: unsupported" >&5 -+echo "${ECHO_T}unsupported" >&6; } ;; - *) -- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 -- CC="$CC $ac_cv_prog_cc_stdc" ;; -+ CC="$CC $ac_cv_prog_cc_c89" -+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; - esac - --# Some people use a C++ compiler to compile C. Since we use `exit', --# in C++ we need to declare it. In case someone uses the same compiler --# for both compiling C and C++ we need to have the C++ compiler decide --# the declaration of exit, since it's the most demanding environment. --cat >conftest.$ac_ext <<_ACEOF --#ifndef __cplusplus -- choke me --#endif --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- for ac_declaration in \ -- '' \ -- 'extern "C" void std::exit (int) throw (); using std::exit;' \ -- 'extern "C" void std::exit (int); using std::exit;' \ -- 'extern "C" void exit (int) throw ();' \ -- 'extern "C" void exit (int);' \ -- 'void exit (int);' --do -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --#include <stdlib.h> --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 - --continue --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --done --rm -f conftest* --if test -n "$ac_declaration"; then -- echo '#ifdef __cplusplus' >>confdefs.h -- echo $ac_declaration >>confdefs.h -- echo '#endif' >>confdefs.h --fi -- --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -@@ -4378,8 +5112,8 @@ - - depcc="$CC" am_compiler_list= - --echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 --echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } - if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4461,58 +5195,273 @@ - fi - done - -- cd .. -- rm -rf conftest.dir --else -- am_cv_CC_dependencies_compiler_type=none --fi -+ cd .. -+ rm -rf conftest.dir -+else -+ am_cv_CC_dependencies_compiler_type=none -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } -+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type -+ -+ -+ -+if -+ test "x$enable_dependency_tracking" != xno \ -+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then -+ am__fastdepCC_TRUE= -+ am__fastdepCC_FALSE='#' -+else -+ am__fastdepCC_TRUE='#' -+ am__fastdepCC_FALSE= -+fi -+ -+ -+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } -+if test "${ac_cv_path_GREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ # Extract the first word of "grep ggrep" to use in msg output -+if test -z "$GREP"; then -+set dummy grep ggrep; ac_prog_name=$2 -+if test "${ac_cv_path_GREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_path_GREP_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in grep ggrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -+ # Check for GNU ac_path_GREP and select it if it is found. -+ # Check for GNU $ac_path_GREP -+case `"$ac_path_GREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo 'GREP' >> "conftest.nl" -+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_GREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_GREP="$ac_path_GREP" -+ ac_path_GREP_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ -+ $ac_path_GREP_found && break 3 -+ done -+done -+ -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ -+GREP="$ac_cv_path_GREP" -+if test -z "$GREP"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+else -+ ac_cv_path_GREP=$GREP -+fi -+ -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -+echo "${ECHO_T}$ac_cv_path_GREP" >&6; } -+ GREP="$ac_cv_path_GREP" -+ -+ -+{ echo "$as_me:$LINENO: checking for egrep" >&5 -+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } -+if test "${ac_cv_path_EGREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 -+ then ac_cv_path_EGREP="$GREP -E" -+ else -+ # Extract the first word of "egrep" to use in msg output -+if test -z "$EGREP"; then -+set dummy egrep; ac_prog_name=$2 -+if test "${ac_cv_path_EGREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_path_EGREP_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in egrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -+ # Check for GNU ac_path_EGREP and select it if it is found. -+ # Check for GNU $ac_path_EGREP -+case `"$ac_path_EGREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo 'EGREP' >> "conftest.nl" -+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_EGREP="$ac_path_EGREP" -+ ac_path_EGREP_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ -+ $ac_path_EGREP_found && break 3 -+ done -+done -+ -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ -+EGREP="$ac_cv_path_EGREP" -+if test -z "$EGREP"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+else -+ ac_cv_path_EGREP=$EGREP -+fi -+ -+ -+ fi -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } -+ EGREP="$ac_cv_path_EGREP" -+ -+ -+{ echo "$as_me:$LINENO: checking for fgrep" >&5 -+echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } -+if test "${ac_cv_path_FGREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 -+ then ac_cv_path_FGREP="$GREP -F" -+ else -+ # Extract the first word of "fgrep" to use in msg output -+if test -z "$FGREP"; then -+set dummy fgrep; ac_prog_name=$2 -+if test "${ac_cv_path_FGREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_path_FGREP_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in fgrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -+ # Check for GNU ac_path_FGREP and select it if it is found. -+ # Check for GNU $ac_path_FGREP -+case `"$ac_path_FGREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo 'FGREP' >> "conftest.nl" -+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_FGREP="$ac_path_FGREP" -+ ac_path_FGREP_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ - --fi --echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 --echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 --CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type -+ $ac_path_FGREP_found && break 3 -+ done -+done - -+done -+IFS=$as_save_IFS - - --if -- test "x$enable_dependency_tracking" != xno \ -- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then -- am__fastdepCC_TRUE= -- am__fastdepCC_FALSE='#' --else -- am__fastdepCC_TRUE='#' -- am__fastdepCC_FALSE= - fi - -+FGREP="$ac_cv_path_FGREP" -+if test -z "$FGREP"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } -+fi - --echo "$as_me:$LINENO: checking for egrep" >&5 --echo $ECHO_N "checking for egrep... $ECHO_C" >&6 --if test "${ac_cv_prog_egrep+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 -- then ac_cv_prog_egrep='grep -E' -- else ac_cv_prog_egrep='egrep' -- fi -+ ac_cv_path_FGREP=$FGREP - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 --echo "${ECHO_T}$ac_cv_prog_egrep" >&6 -- EGREP=$ac_cv_prog_egrep - - --echo "$as_me:$LINENO: checking for fgrep" >&5 --echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 --if test "${ac_cv_prog_fgrep+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1 -- then ac_cv_prog_fgrep='grep -F' -- else ac_cv_prog_fgrep='fgrep' -- fi -+ fi - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5 --echo "${ECHO_T}$ac_cv_prog_fgrep" >&6 -- FGREP=$ac_cv_prog_fgrep -+{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 -+echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } -+ FGREP="$ac_cv_path_FGREP" - - - test -z "$GREP" && GREP=grep -@@ -4535,18 +5484,18 @@ - - - --# Check whether --with-gnu-ld or --without-gnu-ld was given. -+# Check whether --with-gnu-ld was given. - if test "${with_gnu_ld+set}" = set; then -- withval="$with_gnu_ld" -- test "$withval" = no || with_gnu_ld=yes -+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes - else - with_gnu_ld=no --fi; -+fi -+ - ac_prog=ld - if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. -- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 --echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw -@@ -4575,11 +5524,11 @@ - ;; - esac - elif test "$with_gnu_ld" = yes; then -- echo "$as_me:$LINENO: checking for GNU ld" >&5 --echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for GNU ld" >&5 -+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } - else -- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 --echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } - fi - if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -@@ -4612,17 +5561,17 @@ - - LD="$lt_cv_path_LD" - if test -n "$LD"; then -- echo "$as_me:$LINENO: result: $LD" >&5 --echo "${ECHO_T}$LD" >&6 -+ { echo "$as_me:$LINENO: result: $LD" >&5 -+echo "${ECHO_T}$LD" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 - echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } --echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 --echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } - if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4636,8 +5585,8 @@ - ;; - esac - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 --echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } - with_gnu_ld=$lt_cv_prog_gnu_ld - - -@@ -4648,8 +5597,8 @@ - - - --echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 --echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 -+echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } - if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4697,8 +5646,8 @@ - : ${lt_cv_path_NM=no} - fi - fi --echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 --echo "${ECHO_T}$lt_cv_path_NM" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -+echo "${ECHO_T}$lt_cv_path_NM" >&6; } - if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" - else -@@ -4708,8 +5657,8 @@ - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_DUMPBIN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4722,25 +5671,27 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - DUMPBIN=$ac_cv_prog_DUMPBIN - if test -n "$DUMPBIN"; then -- echo "$as_me:$LINENO: result: $DUMPBIN" >&5 --echo "${ECHO_T}$DUMPBIN" >&6 -+ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 -+echo "${ECHO_T}$DUMPBIN" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$DUMPBIN" && break - done - fi -@@ -4750,8 +5701,8 @@ - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4764,30 +5715,45 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN - if test -n "$ac_ct_DUMPBIN"; then -- echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 --echo "${ECHO_T}$ac_ct_DUMPBIN" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 -+echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$ac_ct_DUMPBIN" && break - done --test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":" - -- DUMPBIN=$ac_ct_DUMPBIN -+ if test "x$ac_ct_DUMPBIN" = x; then -+ DUMPBIN=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ DUMPBIN=$ac_ct_DUMPBIN -+ fi - fi - - -@@ -4802,43 +5768,43 @@ - - - --echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 --echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 -+echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } - if test "${lt_cv_nm_interface+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext -- (eval echo "\"\$as_me:4812: $ac_compile\"" >&5) -+ (eval echo "\"\$as_me:5778: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 -- (eval echo "\"\$as_me:4815: $NM \\\"conftest.$ac_objext\\\"\"" >&5) -+ (eval echo "\"\$as_me:5781: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 -- (eval echo "\"\$as_me:4818: output\"" >&5) -+ (eval echo "\"\$as_me:5784: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* - fi --echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 --echo "${ECHO_T}$lt_cv_nm_interface" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 -+echo "${ECHO_T}$lt_cv_nm_interface" >&6; } - --echo "$as_me:$LINENO: checking whether ln -s works" >&5 --echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 -+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } - LN_S=$as_ln_s - if test "$LN_S" = "ln -s"; then -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - else -- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 --echo "${ECHO_T}no, using $LN_S" >&6 -+ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -+echo "${ECHO_T}no, using $LN_S" >&6; } - fi - - # find the maximum length of command line arguments --echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 --echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } - if test "${lt_cv_sys_max_cmd_len+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4957,11 +5923,11 @@ - fi - - if test -n $lt_cv_sys_max_cmd_len ; then -- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 --echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 -+ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } - else -- echo "$as_me:$LINENO: result: none" >&5 --echo "${ECHO_T}none" >&6 -+ { echo "$as_me:$LINENO: result: none" >&5 -+echo "${ECHO_T}none" >&6; } - fi - max_cmd_len=$lt_cv_sys_max_cmd_len - -@@ -4974,8 +5940,8 @@ - : ${MV="mv -f"} - : ${RM="rm -f"} - --echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 --echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 -+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } - # Try some XSI features - xsi_shell=no - ( _lt_dummy="a/b/c" -@@ -4984,18 +5950,18 @@ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes --echo "$as_me:$LINENO: result: $xsi_shell" >&5 --echo "${ECHO_T}$xsi_shell" >&6 -+{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 -+echo "${ECHO_T}$xsi_shell" >&6; } - - --echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 --echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 -+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } - lt_shell_append=no - ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes --echo "$as_me:$LINENO: result: $lt_shell_append" >&5 --echo "${ECHO_T}$lt_shell_append" >&6 -+{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 -+echo "${ECHO_T}$lt_shell_append" >&6; } - - - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -5029,15 +5995,15 @@ - - - --echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 --echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } - if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - lt_cv_ld_reload_flag='-r' - fi --echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 --echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } - reload_flag=$lt_cv_ld_reload_flag - case $reload_flag in - "" | " "*) ;; -@@ -5065,8 +6031,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. - set dummy ${ac_tool_prefix}objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5079,32 +6045,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OBJDUMP=$ac_cv_prog_OBJDUMP - if test -n "$OBJDUMP"; then -- echo "$as_me:$LINENO: result: $OBJDUMP" >&5 --echo "${ECHO_T}$OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -+echo "${ECHO_T}$OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. - set dummy objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5117,27 +6085,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" - fi - fi - ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP - if test -n "$ac_ct_OBJDUMP"; then -- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 --echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OBJDUMP=$ac_ct_OBJDUMP -+ if test "x$ac_ct_OBJDUMP" = x; then -+ OBJDUMP="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OBJDUMP=$ac_ct_OBJDUMP -+ fi - else - OBJDUMP="$ac_cv_prog_OBJDUMP" - fi -@@ -5149,8 +6131,8 @@ - - - --echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 --echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 -+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } - if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5345,8 +6327,8 @@ - esac - - fi --echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 --echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } - file_magic_cmd=$lt_cv_file_magic_cmd - deplibs_check_method=$lt_cv_deplibs_check_method - test -z "$deplibs_check_method" && deplibs_check_method=unknown -@@ -5365,8 +6347,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. - set dummy ${ac_tool_prefix}ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5379,32 +6361,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AR=$ac_cv_prog_AR - if test -n "$AR"; then -- echo "$as_me:$LINENO: result: $AR" >&5 --echo "${ECHO_T}$AR" >&6 -+ { echo "$as_me:$LINENO: result: $AR" >&5 -+echo "${ECHO_T}$AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. - set dummy ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5417,27 +6401,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" - fi - fi - ac_ct_AR=$ac_cv_prog_ac_ct_AR - if test -n "$ac_ct_AR"; then -- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 --echo "${ECHO_T}$ac_ct_AR" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -+echo "${ECHO_T}$ac_ct_AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AR=$ac_ct_AR -+ if test "x$ac_ct_AR" = x; then -+ AR="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AR=$ac_ct_AR -+ fi - else - AR="$ac_cv_prog_AR" - fi -@@ -5458,8 +6456,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. - set dummy ${ac_tool_prefix}strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5472,32 +6470,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - STRIP=$ac_cv_prog_STRIP - if test -n "$STRIP"; then -- echo "$as_me:$LINENO: result: $STRIP" >&5 --echo "${ECHO_T}$STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $STRIP" >&5 -+echo "${ECHO_T}$STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. - set dummy strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5510,27 +6510,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" - fi - fi - ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP - if test -n "$ac_ct_STRIP"; then -- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 --echo "${ECHO_T}$ac_ct_STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -+echo "${ECHO_T}$ac_ct_STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- STRIP=$ac_ct_STRIP -+ if test "x$ac_ct_STRIP" = x; then -+ STRIP=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ STRIP=$ac_ct_STRIP -+ fi - else - STRIP="$ac_cv_prog_STRIP" - fi -@@ -5545,8 +6559,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. - set dummy ${ac_tool_prefix}ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5559,32 +6573,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - RANLIB=$ac_cv_prog_RANLIB - if test -n "$RANLIB"; then -- echo "$as_me:$LINENO: result: $RANLIB" >&5 --echo "${ECHO_T}$RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $RANLIB" >&5 -+echo "${ECHO_T}$RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. - set dummy ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5597,27 +6613,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" - fi - fi - ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB - if test -n "$ac_ct_RANLIB"; then -- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 --echo "${ECHO_T}$ac_ct_RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -+echo "${ECHO_T}$ac_ct_RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- RANLIB=$ac_ct_RANLIB -+ if test "x$ac_ct_RANLIB" = x; then -+ RANLIB=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ RANLIB=$ac_ct_RANLIB -+ fi - else - RANLIB="$ac_cv_prog_RANLIB" - fi -@@ -5690,8 +6720,8 @@ - - - # Check for command to grab the raw symbol name followed by C symbol from nm. --echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 --echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } - if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5910,11 +6940,11 @@ - lt_cv_sys_global_symbol_to_cdecl= - fi - if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then -- echo "$as_me:$LINENO: result: failed" >&5 --echo "${ECHO_T}failed" >&6 -+ { echo "$as_me:$LINENO: result: failed" >&5 -+echo "${ECHO_T}failed" >&6; } - else -- echo "$as_me:$LINENO: result: ok" >&5 --echo "${ECHO_T}ok" >&6 -+ { echo "$as_me:$LINENO: result: ok" >&5 -+echo "${ECHO_T}ok" >&6; } - fi - - -@@ -5939,11 +6969,11 @@ - - - --# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -+# Check whether --enable-libtool-lock was given. - if test "${enable_libtool_lock+set}" = set; then -- enableval="$enable_libtool_lock" -+ enableval=$enable_libtool_lock; -+fi - --fi; - test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - - # Some flags need to be propagated to the compiler or linker for good -@@ -5970,7 +7000,7 @@ - ;; - *-*-irix6*) - # Find out which ABI we are using. -- echo '#line 5973 "configure"' > conftest.$ac_ext -+ echo '#line 7003 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? -@@ -6062,8 +7092,8 @@ - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" -- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 --echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } - if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6089,35 +7119,32 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - lt_cv_cc_needs_belf=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --lt_cv_cc_needs_belf=no -+ lt_cv_cc_needs_belf=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' -@@ -6126,8 +7153,8 @@ - ac_compiler_gnu=$ac_cv_c_compiler_gnu - - fi --echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 --echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" -@@ -6166,8 +7193,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. - set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6180,32 +7207,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - DSYMUTIL=$ac_cv_prog_DSYMUTIL - if test -n "$DSYMUTIL"; then -- echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 --echo "${ECHO_T}$DSYMUTIL" >&6 -+ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -+echo "${ECHO_T}$DSYMUTIL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. - set dummy dsymutil; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6218,27 +7247,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":" - fi - fi - ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL - if test -n "$ac_ct_DSYMUTIL"; then -- echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 --echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- DSYMUTIL=$ac_ct_DSYMUTIL -+ if test "x$ac_ct_DSYMUTIL" = x; then -+ DSYMUTIL=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ DSYMUTIL=$ac_ct_DSYMUTIL -+ fi - else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" - fi -@@ -6246,8 +7289,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. - set dummy ${ac_tool_prefix}nmedit; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6260,32 +7303,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - NMEDIT=$ac_cv_prog_NMEDIT - if test -n "$NMEDIT"; then -- echo "$as_me:$LINENO: result: $NMEDIT" >&5 --echo "${ECHO_T}$NMEDIT" >&6 -+ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 -+echo "${ECHO_T}$NMEDIT" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. - set dummy nmedit; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6298,27 +7343,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":" - fi - fi - ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT - if test -n "$ac_ct_NMEDIT"; then -- echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 --echo "${ECHO_T}$ac_ct_NMEDIT" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- NMEDIT=$ac_ct_NMEDIT -+ if test "x$ac_ct_NMEDIT" = x; then -+ NMEDIT=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ NMEDIT=$ac_ct_NMEDIT -+ fi - else - NMEDIT="$ac_cv_prog_NMEDIT" - fi -@@ -6326,8 +7385,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. - set dummy ${ac_tool_prefix}lipo; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_LIPO+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6340,32 +7399,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - LIPO=$ac_cv_prog_LIPO - if test -n "$LIPO"; then -- echo "$as_me:$LINENO: result: $LIPO" >&5 --echo "${ECHO_T}$LIPO" >&6 -+ { echo "$as_me:$LINENO: result: $LIPO" >&5 -+echo "${ECHO_T}$LIPO" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. - set dummy lipo; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6378,27 +7439,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":" - fi - fi - ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO - if test -n "$ac_ct_LIPO"; then -- echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 --echo "${ECHO_T}$ac_ct_LIPO" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 -+echo "${ECHO_T}$ac_ct_LIPO" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- LIPO=$ac_ct_LIPO -+ if test "x$ac_ct_LIPO" = x; then -+ LIPO=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ LIPO=$ac_ct_LIPO -+ fi - else - LIPO="$ac_cv_prog_LIPO" - fi -@@ -6406,8 +7481,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. - set dummy ${ac_tool_prefix}otool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6420,32 +7495,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OTOOL=$ac_cv_prog_OTOOL - if test -n "$OTOOL"; then -- echo "$as_me:$LINENO: result: $OTOOL" >&5 --echo "${ECHO_T}$OTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $OTOOL" >&5 -+echo "${ECHO_T}$OTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. - set dummy otool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6458,27 +7535,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":" - fi - fi - ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL - if test -n "$ac_ct_OTOOL"; then -- echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 --echo "${ECHO_T}$ac_ct_OTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 -+echo "${ECHO_T}$ac_ct_OTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OTOOL=$ac_ct_OTOOL -+ if test "x$ac_ct_OTOOL" = x; then -+ OTOOL=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OTOOL=$ac_ct_OTOOL -+ fi - else - OTOOL="$ac_cv_prog_OTOOL" - fi -@@ -6486,8 +7577,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. - set dummy ${ac_tool_prefix}otool64; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OTOOL64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6500,32 +7591,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OTOOL64=$ac_cv_prog_OTOOL64 - if test -n "$OTOOL64"; then -- echo "$as_me:$LINENO: result: $OTOOL64" >&5 --echo "${ECHO_T}$OTOOL64" >&6 -+ { echo "$as_me:$LINENO: result: $OTOOL64" >&5 -+echo "${ECHO_T}$OTOOL64" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. - set dummy otool64; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6538,27 +7631,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":" - fi - fi - ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 - if test -n "$ac_ct_OTOOL64"; then -- echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 --echo "${ECHO_T}$ac_ct_OTOOL64" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 -+echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OTOOL64=$ac_ct_OTOOL64 -+ if test "x$ac_ct_OTOOL64" = x; then -+ OTOOL64=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OTOOL64=$ac_ct_OTOOL64 -+ fi - else - OTOOL64="$ac_cv_prog_OTOOL64" - fi -@@ -6589,8 +7696,8 @@ - - - -- echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 --echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 -+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } - if test "${lt_cv_apple_cc_single_mod+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6616,10 +7723,10 @@ - rm -f conftest.* - fi - fi --echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 --echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6 -- echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 --echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 -+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } -+ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 -+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } - if test "${lt_cv_ld_exported_symbols_list+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6643,41 +7750,38 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - lt_cv_ld_exported_symbols_list=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --lt_cv_ld_exported_symbols_list=no -+ lt_cv_ld_exported_symbols_list=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - - fi --echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 --echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -@@ -6718,8 +7822,8 @@ - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu --echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 --echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } - # On Suns, sometimes $CPP names a directory. - if test -n "$CPP" && test -d "$CPP"; then - CPP= -@@ -6753,24 +7857,22 @@ - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - : - else - echo "$as_me: failed program was:" >&5 -@@ -6779,9 +7881,10 @@ - # Broken: fails on valid input. - continue - fi -+ - rm -f conftest.err conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -6791,24 +7894,22 @@ - /* end confdefs.h. */ - #include <ac_nonexistent.h> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - # Broken: success on invalid input. - continue - else -@@ -6819,6 +7920,7 @@ - ac_preproc_ok=: - break - fi -+ - rm -f conftest.err conftest.$ac_ext - - done -@@ -6836,8 +7938,8 @@ - else - ac_cv_prog_CPP=$CPP - fi --echo "$as_me:$LINENO: result: $CPP" >&5 --echo "${ECHO_T}$CPP" >&6 -+{ echo "$as_me:$LINENO: result: $CPP" >&5 -+echo "${ECHO_T}$CPP" >&6; } - ac_preproc_ok=false - for ac_c_preproc_warn_flag in '' yes - do -@@ -6860,24 +7962,22 @@ - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - : - else - echo "$as_me: failed program was:" >&5 -@@ -6886,9 +7986,10 @@ - # Broken: fails on valid input. - continue - fi -+ - rm -f conftest.err conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -6898,24 +7999,22 @@ - /* end confdefs.h. */ - #include <ac_nonexistent.h> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - # Broken: success on invalid input. - continue - else -@@ -6926,6 +8025,7 @@ - ac_preproc_ok=: - break - fi -+ - rm -f conftest.err conftest.$ac_ext - - done -@@ -6948,8 +8048,8 @@ - ac_compiler_gnu=$ac_cv_c_compiler_gnu - - --echo "$as_me:$LINENO: checking for ANSI C header files" >&5 --echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } - if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6973,35 +8073,31 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_header_stdc=no -+ ac_cv_header_stdc=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - - if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -@@ -7057,6 +8153,7 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - #include <ctype.h> -+#include <stdlib.h> - #if ((' ' & 0x0FF) == 0x020) - # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') - # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -@@ -7076,18 +8173,27 @@ - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) -- exit(2); -- exit (0); -+ return 2; -+ return 0; - } - _ACEOF - rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ { (case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -@@ -7100,12 +8206,14 @@ - ( exit $ac_status ) - ac_cv_header_stdc=no - fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext - fi -+ -+ - fi - fi --echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 --echo "${ECHO_T}$ac_cv_header_stdc" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -+echo "${ECHO_T}$ac_cv_header_stdc" >&6; } - if test $ac_cv_header_stdc = yes; then - - cat >>confdefs.h <<\_ACEOF -@@ -7128,9 +8236,9 @@ - inttypes.h stdint.h unistd.h - do - as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -+{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - cat >conftest.$ac_ext <<_ACEOF -@@ -7144,38 +8252,35 @@ - #include <$ac_header> - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --eval "$as_ac_Header=no" -+ eval "$as_ac_Header=no" - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ac_res=`eval echo '${'$as_ac_Header'}'` -+ { echo "$as_me:$LINENO: result: $ac_res" >&5 -+echo "${ECHO_T}$ac_res" >&6; } - if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF - #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -@@ -7190,9 +8295,9 @@ - for ac_header in dlfcn.h - do - as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -+{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - cat >conftest.$ac_ext <<_ACEOF -@@ -7206,38 +8311,35 @@ - #include <$ac_header> - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --eval "$as_ac_Header=no" -+ eval "$as_ac_Header=no" - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ac_res=`eval echo '${'$as_ac_Header'}'` -+ { echo "$as_me:$LINENO: result: $ac_res" >&5 -+echo "${ECHO_T}$ac_res" >&6; } - if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF - #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -@@ -7257,10 +8359,9 @@ - - - -- # Check whether --enable-shared or --disable-shared was given. -+ # Check whether --enable-shared was given. - if test "${enable_shared+set}" = set; then -- enableval="$enable_shared" -- p=${PACKAGE-default} -+ enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; -@@ -7279,7 +8380,8 @@ - esac - else - enable_shared=yes --fi; -+fi -+ - - - -@@ -7288,10 +8390,9 @@ - - - -- # Check whether --enable-static or --disable-static was given. -+ # Check whether --enable-static was given. - if test "${enable_static+set}" = set; then -- enableval="$enable_static" -- p=${PACKAGE-default} -+ enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; -@@ -7310,7 +8411,8 @@ - esac - else - enable_static=yes --fi; -+fi -+ - - - -@@ -7320,13 +8422,13 @@ - - - --# Check whether --with-pic or --without-pic was given. -+# Check whether --with-pic was given. - if test "${with_pic+set}" = set; then -- withval="$with_pic" -- pic_mode="$withval" -+ withval=$with_pic; pic_mode="$withval" - else - pic_mode=default --fi; -+fi -+ - - test -z "$pic_mode" && pic_mode=default - -@@ -7336,10 +8438,9 @@ - - - -- # Check whether --enable-fast-install or --disable-fast-install was given. -+ # Check whether --enable-fast-install was given. - if test "${enable_fast_install+set}" = set; then -- enableval="$enable_fast_install" -- p=${PACKAGE-default} -+ enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; -@@ -7358,7 +8459,8 @@ - esac - else - enable_fast_install=yes --fi; -+fi -+ - - - -@@ -7418,8 +8520,8 @@ - setopt NO_GLOB_SUBST - fi - --echo "$as_me:$LINENO: checking for objdir" >&5 --echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for objdir" >&5 -+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } - if test "${lt_cv_objdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7433,8 +8535,8 @@ - fi - rmdir .libs 2>/dev/null - fi --echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 --echo "${ECHO_T}$lt_cv_objdir" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -+echo "${ECHO_T}$lt_cv_objdir" >&6; } - objdir=$lt_cv_objdir - - -@@ -7526,8 +8628,8 @@ - case $deplibs_check_method in - file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then -- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 --echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } - if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7579,11 +8681,11 @@ - - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if test -n "$MAGIC_CMD"; then -- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 --echo "${ECHO_T}$MAGIC_CMD" >&6 -+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -+echo "${ECHO_T}$MAGIC_CMD" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -7592,8 +8694,8 @@ - - if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then -- echo "$as_me:$LINENO: checking for file" >&5 --echo $ECHO_N "checking for file... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for file" >&5 -+echo $ECHO_N "checking for file... $ECHO_C" >&6; } - if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7645,11 +8747,11 @@ - - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if test -n "$MAGIC_CMD"; then -- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 --echo "${ECHO_T}$MAGIC_CMD" >&6 -+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -+echo "${ECHO_T}$MAGIC_CMD" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -7729,8 +8831,8 @@ - if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - -- echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 --echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7747,11 +8849,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:7750: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:8852: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 -- echo "$as_me:7754: \$? = $ac_status" >&5 -+ echo "$as_me:8856: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -@@ -7764,8 +8866,8 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } - - if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -@@ -7784,8 +8886,8 @@ - lt_prog_compiler_pic= - lt_prog_compiler_static= - --echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 --echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' -@@ -8056,8 +9158,8 @@ - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; - esac --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic" >&6 -+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } - - - -@@ -8068,8 +9170,8 @@ - # Check to make sure the PIC flag actually works. - # - if test -n "$lt_prog_compiler_pic"; then -- echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 --echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8086,11 +9188,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:8089: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:9191: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 -- echo "$as_me:8093: \$? = $ac_status" >&5 -+ echo "$as_me:9195: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -@@ -8103,8 +9205,8 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } - - if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in -@@ -8127,8 +9229,8 @@ - # Check to make sure the static flag actually works. - # - wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" --echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 --echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8155,8 +9257,8 @@ - LDFLAGS="$save_LDFLAGS" - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } - - if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -@@ -8170,8 +9272,8 @@ - - - -- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8191,11 +9293,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:8194: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:9296: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:8198: \$? = $ac_status" >&5 -+ echo "$as_me:9300: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized -@@ -8217,16 +9319,16 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - - - - - - -- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8246,11 +9348,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:8249: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:9351: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:8253: \$? = $ac_status" >&5 -+ echo "$as_me:9355: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized -@@ -8272,8 +9374,8 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - - - -@@ -8281,16 +9383,16 @@ - hard_links="nottested" - if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user -- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 --echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no -- echo "$as_me:$LINENO: result: $hard_links" >&5 --echo "${ECHO_T}$hard_links" >&6 -+ { echo "$as_me:$LINENO: result: $hard_links" >&5 -+echo "${ECHO_T}$hard_links" >&6; } - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 - echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -@@ -8305,8 +9407,8 @@ - - - -- echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 --echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } - - runpath_var= - allow_undefined_flag= -@@ -8763,27 +9865,23 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { -@@ -8801,8 +9899,10 @@ - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - -@@ -8832,27 +9932,23 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { -@@ -8870,8 +9966,10 @@ - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - -@@ -9088,35 +10186,33 @@ - int foo(void) {} - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - else -@@ -9373,8 +10469,8 @@ - fi - fi - --echo "$as_me:$LINENO: result: $ld_shlibs" >&5 --echo "${ECHO_T}$ld_shlibs" >&6 -+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -+echo "${ECHO_T}$ld_shlibs" >&6; } - test "$ld_shlibs" = no && can_build_shared=no - - with_gnu_ld=$with_gnu_ld -@@ -9410,46 +10506,52 @@ - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. -- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 --echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 -- $RM conftest* -- echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } -+if test "${lt_cv_archive_cmds_need_lc+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext - -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl -- pic_flag=$lt_prog_compiler_pic -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag -- allow_undefined_flag= -- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$lt_prog_compiler_wl -+ pic_flag=$lt_prog_compiler_pic -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$allow_undefined_flag -+ allow_undefined_flag= -+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -- then -- archive_cmds_need_lc=no -- else -- archive_cmds_need_lc=yes -- fi -- allow_undefined_flag=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $RM conftest* -- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 --echo "${ECHO_T}$archive_cmds_need_lc" >&6 -+ then -+ lt_cv_archive_cmds_need_lc=no -+ else -+ lt_cv_archive_cmds_need_lc=yes -+ fi -+ allow_undefined_flag=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ -+fi -+{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 -+echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; } -+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi -@@ -9612,8 +10714,8 @@ - - - -- echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 --echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } - - if test "$GCC" = yes; then - case $host_os in -@@ -10029,12 +11131,17 @@ - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no -+ - # Some binutils ld are patched to set DT_RUNPATH -- save_LDFLAGS=$LDFLAGS -- save_libdir=$libdir -- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ -- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" -- cat >conftest.$ac_ext <<_ACEOF -+ if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ lt_cv_shlibpath_overrides_runpath=no -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ -+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" -+ cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext -@@ -10050,40 +11157,42 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then -- shlibpath_overrides_runpath=yes -+ lt_cv_shlibpath_overrides_runpath=yes - fi - - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -- LDFLAGS=$save_LDFLAGS -- libdir=$save_libdir -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir -+ -+fi -+ -+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install -@@ -10293,8 +11402,8 @@ - dynamic_linker=no - ;; - esac --echo "$as_me:$LINENO: result: $dynamic_linker" >&5 --echo "${ECHO_T}$dynamic_linker" >&6 -+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -+echo "${ECHO_T}$dynamic_linker" >&6; } - test "$dynamic_linker" = no && can_build_shared=no - - variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -@@ -10395,8 +11504,8 @@ - - - -- echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 --echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } - hardcode_action= - if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || -@@ -10420,8 +11529,8 @@ - # directories. - hardcode_action=unsupported - fi --echo "$as_me:$LINENO: result: $hardcode_action" >&5 --echo "${ECHO_T}$hardcode_action" >&6 -+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 -+echo "${ECHO_T}$hardcode_action" >&6; } - - if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then -@@ -10465,8 +11574,8 @@ - - darwin*) - # if libdl is installed we need to link against it -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } - if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10479,56 +11588,53 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - int - main () - { --dlopen (); -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dl_dlopen=no -+ ac_cv_lib_dl_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } - if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" - else -@@ -10542,8 +11648,8 @@ - ;; - - *) -- echo "$as_me:$LINENO: checking for shl_load" >&5 --echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for shl_load" >&5 -+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } - if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10570,73 +11676,64 @@ - - #undef shl_load - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" --{ - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char shl_load (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ --#if defined (__stub_shl_load) || defined (__stub___shl_load) -+#if defined __stub_shl_load || defined __stub___shl_load - choke me --#else --char (*f) () = shl_load; --#endif --#ifdef __cplusplus --} - #endif - - int - main () - { --return f != shl_load; -+return shl_load (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_func_shl_load=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_func_shl_load=no -+ ac_cv_func_shl_load=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 --echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } - if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" - else -- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 --echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } - if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10649,61 +11746,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char shl_load (); - int - main () - { --shl_load (); -+return shl_load (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_shl_load=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dld_shl_load=no -+ ac_cv_lib_dld_shl_load=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } - if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" - else -- echo "$as_me:$LINENO: checking for dlopen" >&5 --echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen" >&5 -+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } - if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10730,73 +11824,64 @@ - - #undef dlopen - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" --{ - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ --#if defined (__stub_dlopen) || defined (__stub___dlopen) -+#if defined __stub_dlopen || defined __stub___dlopen - choke me --#else --char (*f) () = dlopen; --#endif --#ifdef __cplusplus --} - #endif - - int - main () - { --return f != dlopen; -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_func_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_func_dlopen=no -+ ac_cv_func_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 --echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } - if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" - else -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } - if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10809,61 +11894,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - int - main () - { --dlopen (); -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dl_dlopen=no -+ ac_cv_lib_dl_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } - if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" - else -- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 --echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } - if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10876,61 +11958,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - int - main () - { --dlopen (); -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_svld_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_svld_dlopen=no -+ ac_cv_lib_svld_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } - if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" - else -- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 --echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } - if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10943,56 +12022,53 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dld_link (); - int - main () - { --dld_link (); -+return dld_link (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_dld_link=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dld_dld_link=no -+ ac_cv_lib_dld_dld_link=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } - if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" - fi -@@ -11032,8 +12108,8 @@ - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - -- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 --echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } - if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -11043,7 +12119,7 @@ - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF --#line 11046 "configure" -+#line 12122 "configure" - #include "confdefs.h" - - #if HAVE_DLFCN_H -@@ -11123,13 +12199,13 @@ - - - fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" -- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 --echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } - if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -11139,7 +12215,7 @@ - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF --#line 11142 "configure" -+#line 12218 "configure" - #include "confdefs.h" - - #if HAVE_DLFCN_H -@@ -11219,8 +12295,8 @@ - - - fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" -@@ -11258,13 +12334,13 @@ - - striplib= - old_striplib= --echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 --echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } - if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - else - # FIXME - insert some real tests, host_os isn't really good enough - case $host_os in -@@ -11272,16 +12348,16 @@ - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - ;; - *) -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - ;; - esac - fi -@@ -11298,13 +12374,13 @@ - - - # Report which library types will actually be built -- echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 --echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -- echo "$as_me:$LINENO: result: $can_build_shared" >&5 --echo "${ECHO_T}$can_build_shared" >&6 -+ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } -+ { echo "$as_me:$LINENO: result: $can_build_shared" >&5 -+echo "${ECHO_T}$can_build_shared" >&6; } - -- echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 --echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and -@@ -11324,15 +12400,15 @@ - fi - ;; - esac -- echo "$as_me:$LINENO: result: $enable_shared" >&5 --echo "${ECHO_T}$enable_shared" >&6 -+ { echo "$as_me:$LINENO: result: $enable_shared" >&5 -+echo "${ECHO_T}$enable_shared" >&6; } - -- echo "$as_me:$LINENO: checking whether to build static libraries" >&5 --echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes -- echo "$as_me:$LINENO: result: $enable_static" >&5 --echo "${ECHO_T}$enable_static" >&6 -+ { echo "$as_me:$LINENO: result: $enable_static" >&5 -+echo "${ECHO_T}$enable_static" >&6; } - - - -@@ -11358,7 +12434,7 @@ - - - -- ac_config_commands="$ac_config_commands libtool" -+ ac_config_commands="$ac_config_commands libtool" - - - -@@ -11370,161 +12446,85 @@ - - if test -n "${machine_dir}"; then - case ${machine_dir} in -- a29k) -- --subdirs="$subdirs a29k" -+ a29k) subdirs="$subdirs a29k" - ;; -- arm) -- --subdirs="$subdirs arm" -+ arm) subdirs="$subdirs arm" - ;; -- bfin) -- --subdirs="$subdirs bfin" -+ avr32) subdirs="$subdirs avr32" - ;; -- cris) -- --subdirs="$subdirs cris" -+ bfin) subdirs="$subdirs bfin" - ;; -- crx) -- --subdirs="$subdirs crx" -+ cris) subdirs="$subdirs cris" - ;; -- d10v) -- --subdirs="$subdirs d10v" -+ crx) subdirs="$subdirs crx" - ;; -- d30v) -- --subdirs="$subdirs d30v" -+ d10v) subdirs="$subdirs d10v" - ;; -- fr30) -- --subdirs="$subdirs fr30" -+ d30v) subdirs="$subdirs d30v" - ;; -- frv) -- --subdirs="$subdirs frv" -+ fr30) subdirs="$subdirs fr30" - ;; -- h8300) -- --subdirs="$subdirs h8300" -+ frv) subdirs="$subdirs frv" - ;; -- h8500) -- --subdirs="$subdirs h8500" -+ h8300) subdirs="$subdirs h8300" - ;; -- hppa) -- --subdirs="$subdirs hppa" -+ h8500) subdirs="$subdirs h8500" - ;; -- i386) -- --subdirs="$subdirs i386" -+ hppa) subdirs="$subdirs hppa" - ;; -- i960) -- --subdirs="$subdirs i960" -+ i386) subdirs="$subdirs i386" - ;; -- iq2000) -- --subdirs="$subdirs iq2000" -+ i960) subdirs="$subdirs i960" - ;; -- lm32) -- --subdirs="$subdirs lm32" -+ iq2000) subdirs="$subdirs iq2000" - ;; -- m32c) -- --subdirs="$subdirs m32c" -+ lm32) subdirs="$subdirs lm32" - ;; -- m32r) -- --subdirs="$subdirs m32r" -+ m32c) subdirs="$subdirs m32c" - ;; -- m68hc11) -- --subdirs="$subdirs m68hc11" -+ m32r) subdirs="$subdirs m32r" - ;; -- m68k) -- --subdirs="$subdirs m68k" -+ m68hc11) subdirs="$subdirs m68hc11" - ;; -- m88k) -- --subdirs="$subdirs m88k" -+ m68k) subdirs="$subdirs m68k" - ;; -- mep ) -- --subdirs="$subdirs mep" -+ m88k) subdirs="$subdirs m88k" - ;; -- mips) -- --subdirs="$subdirs mips" -+ mep ) subdirs="$subdirs mep" - ;; -- mn10200) -- --subdirs="$subdirs mn10200" -+ mips) subdirs="$subdirs mips" - ;; -- mn10300) -- --subdirs="$subdirs mn10300" -+ mn10200) subdirs="$subdirs mn10200" - ;; -- mt) -- --subdirs="$subdirs mt" -+ mn10300) subdirs="$subdirs mn10300" - ;; -- necv70) -- --subdirs="$subdirs necv70" -+ mt) subdirs="$subdirs mt" - ;; -- powerpc) -- --subdirs="$subdirs powerpc" -+ necv70) subdirs="$subdirs necv70" - ;; -- sh) -- --subdirs="$subdirs sh" -+ powerpc) subdirs="$subdirs powerpc" - ;; -- sparc) -- --subdirs="$subdirs sparc" -+ sh) subdirs="$subdirs sh" - ;; -- spu) -- --subdirs="$subdirs spu" -+ sparc) subdirs="$subdirs sparc" - ;; -- tic4x) -- --subdirs="$subdirs tic4x" -+ spu) subdirs="$subdirs spu" - ;; -- tic80) -- --subdirs="$subdirs tic80" -+ tic4x) subdirs="$subdirs tic4x" - ;; -- v850) -- --subdirs="$subdirs v850" -+ tic80) subdirs="$subdirs tic80" - ;; -- w65) -- --subdirs="$subdirs w65" -+ v850) subdirs="$subdirs v850" - ;; -- x86_64) -- --subdirs="$subdirs x86_64" -+ w65) subdirs="$subdirs w65" - ;; -- xscale) -- --subdirs="$subdirs xscale" -+ x86_64) subdirs="$subdirs x86_64" - ;; -- xstormy16) -- --subdirs="$subdirs xstormy16" -+ xscale) subdirs="$subdirs xscale" - ;; -- z8k) -- --subdirs="$subdirs z8k" -+ xstormy16) subdirs="$subdirs xstormy16" -+ ;; -+ z8k) subdirs="$subdirs z8k" - ;; - esac; - fi -@@ -11540,7 +12540,7 @@ - fi - - -- ac_config_files="$ac_config_files Makefile" -+ac_config_files="$ac_config_files Makefile" - - cat >confcache <<\_ACEOF - # This file is a shell script that caches the results of configure -@@ -11560,39 +12560,58 @@ - - # The following way of writing the cache mishandles newlines in values, - # but we know of no workaround that is simple, portable, and efficient. --# So, don't put newlines in cache variables' values. -+# So, we kill variables containing newlines. - # Ultrix sh set writes to stderr and can't be redirected directly, - # and sets the high bit in the cache file unless we assign to the vars. --{ -+( -+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ - (set) 2>&1 | -- case `(ac_space=' '; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -+ case $as_nl`(ac_space=' '; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -- ;; -+ ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. -- sed -n \ -- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; -- esac; --} | -+ esac | -+ sort -+) | - sed ' -+ /^ac_cv_env_/b end - t clear -- : clear -+ :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end -- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -- : end' >>confcache --if diff $cache_file confcache >/dev/null 2>&1; then :; else -- if test -w $cache_file; then -- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" -+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -+ :end' >>confcache -+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else -+ if test -w "$cache_file"; then -+ test "x$cache_file" != "x/dev/null" && -+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -+echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else -- echo "not updating unwritable cache $cache_file" -+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -+echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi - fi - rm -f confcache -@@ -11601,63 +12620,48 @@ - # Let make expand exec_prefix. - test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - --# VPATH may cause trouble with some makes, so we remove $(srcdir), --# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and --# trailing colons and then remove the whole line if VPATH becomes empty --# (actually we leave an empty line to preserve line numbers). --if test "x$srcdir" = x.; then -- ac_vpsub='/^[ ]*VPATH[ ]*=/{ --s/:*\$(srcdir):*/:/; --s/:*\${srcdir}:*/:/; --s/:*@srcdir@:*/:/; --s/^\([^=]*=[ ]*\):*/\1/; --s/:*$//; --s/^[^=]*=[ ]*$//; --}' --fi -- - # Transform confdefs.h into DEFS. - # Protect against shell expansion while executing Makefile rules. - # Protect against Makefile macro expansion. - # - # If the first sed substitution is executed (which looks for macros that --# take arguments), then we branch to the quote section. Otherwise, -+# take arguments), then branch to the quote section. Otherwise, - # look for a macro that doesn't take arguments. --cat >confdef2opt.sed <<\_ACEOF -+ac_script=' - t clear --: clear --s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g -+:clear -+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g - t quote --s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g -+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g - t quote --d --: quote --s,[ `~#$^&*(){}\\|;'"<>?],\\&,g --s,\[,\\&,g --s,\],\\&,g --s,\$,$$,g --p --_ACEOF --# We use echo to avoid assuming a particular line-breaking character. --# The extra dot is to prevent the shell from consuming trailing --# line-breaks from the sub-command output. A line-break within --# single-quotes doesn't work because, if this script is created in a --# platform that uses two characters for line-breaks (e.g., DOS), tr --# would break. --ac_LF_and_DOT=`echo; echo .` --DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` --rm -f confdef2opt.sed -+b any -+:quote -+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -+s/\[/\\&/g -+s/\]/\\&/g -+s/\$/$$/g -+H -+:any -+${ -+ g -+ s/^\n// -+ s/\n/ /g -+ p -+} -+' -+DEFS=`sed -n "$ac_script" confdefs.h` - - - ac_libobjs= - ac_ltlibobjs= - for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. -- ac_i=`echo "$ac_i" | -- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` -- # 2. Add them. -- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" -- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -+ ac_i=`echo "$ac_i" | sed "$ac_script"` -+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR -+ # will be set to the directory where LIBOBJS objects are built. -+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" -+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' - done - LIBOBJS=$ac_libobjs - -@@ -11772,17 +12776,45 @@ - ## M4sh Initialization. ## - ## --------------------- ## - --# Be Bourne compatible -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh - fi --DUALCASE=1; export DUALCASE # for MKS sh - - # Support unset when possible. - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -11792,8 +12824,43 @@ - fi - - -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ - # Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done - PS1='$ ' - PS2='> ' - PS4='+ ' -@@ -11807,18 +12874,19 @@ - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else -- $as_unset $as_var -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi - done - - # Required to use basename. --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename - else - as_basename=false -@@ -11826,159 +12894,120 @@ - - - # Name of the executable. --as_me=`$as_basename "$0" || -+as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)$' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || - echo X/"$0" | -- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -- /^X\/\(\/\/\)$/{ s//\1/; q; } -- /^X\/\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- -- --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits -- --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh --fi -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH - - -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done - -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 --echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -- /*) -- if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | - sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno - N -- s,$,-, -- : loop -- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -+ s/-\n.*// - ' >$as_me.lineno && -- chmod +x $as_me.lineno || -- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 --echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" - # Exit status is that of the last command. - exit - } - - --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; - esac - --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - - rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi - echo >conf$$.file - if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -- else -- as_ln_s='ln -s' -- fi - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi --rm -f conf$$ conf$$.exe conf$$.file -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null - - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -@@ -11987,7 +13016,28 @@ - as_mkdir_p=false - fi - --as_executable_p="test -f" -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x - - # Sed expression to map a string onto a valid CPP name. - as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -@@ -11996,31 +13046,14 @@ - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH -- - exec 6>&1 - --# Open the log real soon, to keep \$[0] and so on meaningful, and to -+# Save the log message, to keep $[0] and so on meaningful, and to - # report actual input values of CONFIG_FILES etc. instead of their --# values after options handling. Logging --version etc. is OK. --exec 5>>config.log --{ -- echo -- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX --## Running $as_me. ## --_ASBOX --} >&5 --cat >&5 <<_CSEOF -- -+# values after options handling. -+ac_log=" - This file was extended by newlib $as_me 1.17.0, which was --generated by GNU Autoconf 2.59. Invocation command line was -+generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS -@@ -12028,30 +13061,19 @@ - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - --_CSEOF --echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 --echo >&5 -+on `(hostname || uname -n) 2>/dev/null | sed 1q` -+" -+ - _ACEOF - -+cat >>$CONFIG_STATUS <<_ACEOF - # Files that config.status was made for. --if test -n "$ac_config_files"; then -- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS --fi -- --if test -n "$ac_config_headers"; then -- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS --fi -- --if test -n "$ac_config_links"; then -- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS --fi -+config_files="$ac_config_files" -+config_commands="$ac_config_commands" - --if test -n "$ac_config_commands"; then -- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS --fi -+_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF -- - ac_cs_usage="\ - \`$as_me' instantiates files from templates according to the - current configuration. -@@ -12059,7 +13081,7 @@ - Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit -- -V, --version print version number, then exit -+ -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions -@@ -12073,19 +13095,21 @@ - $config_commands - - Report bugs to <bug-autoconf@gnu.org>." --_ACEOF - -+_ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - ac_cs_version="\\ - newlib config.status 1.17.0 --configured by $0, generated by GNU Autoconf 2.59, -- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" -+configured by $0, generated by GNU Autoconf 2.61, -+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" - --Copyright (C) 2003 Free Software Foundation, Inc. -+Copyright (C) 2006 Free Software Foundation, Inc. - This config.status script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it." --srcdir=$srcdir --INSTALL="$INSTALL" -+ -+ac_pwd='$ac_pwd' -+srcdir='$srcdir' -+INSTALL='$INSTALL' - _ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF -@@ -12096,60 +13120,42 @@ - do - case $1 in - --*=*) -- ac_option=`expr "x$1" : 'x\([^=]*\)='` -- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` -+ ac_option=`expr "X$1" : 'X\([^=]*\)='` -+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; -- -*) -+ *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; -- *) # This is not an option, so the user has probably given explicit -- # arguments. -- ac_option=$1 -- ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; -- --version | --vers* | -V ) -- echo "$ac_cs_version"; exit 0 ;; -- --he | --h) -- # Conflict between --help and --header -- { { echo "$as_me:$LINENO: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&2;} -- { (exit 1); exit 1; }; };; -- --help | --hel | -h ) -- echo "$ac_cs_usage"; exit 0 ;; -- --debug | --d* | -d ) -+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) -+ echo "$ac_cs_version"; exit ;; -+ --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; -- --header | --heade | --head | --hea ) -- $ac_shift -- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" -- ac_need_defaults=false;; -+ --he | --h | --help | --hel | -h ) -+ echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. -- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&2;} -+ -*) { echo "$as_me: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - -- *) ac_config_targets="$ac_config_targets $1" ;; -+ *) ac_config_targets="$ac_config_targets $1" -+ ac_need_defaults=false ;; - - esac - shift -@@ -12165,17 +13171,28 @@ - _ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - if \$ac_cs_recheck; then -- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -+ CONFIG_SHELL=$SHELL -+ export CONFIG_SHELL -+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - fi - - _ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+exec 5>>config.log -+{ -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+ echo "$ac_log" -+} >&5 - -+_ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - # --# INIT-COMMANDS section. -+# INIT-COMMANDS - # -- - AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -@@ -12436,22 +13453,23 @@ - - _ACEOF - -- -- - cat >>$CONFIG_STATUS <<\_ACEOF -+ -+# Handling of arguments. - for ac_config_target in $ac_config_targets - do -- case "$ac_config_target" in -- # Handling of arguments. -- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; -- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -- "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; -+ case $ac_config_target in -+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; -+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 - echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac - done - -+ - # If the user did not use the arguments to specify the items to instantiate, - # then the envvar interface is used. Set only those that are not. - # We use the long form for the default assignment because of an extremely -@@ -12462,396 +13480,492 @@ - fi - - # Have a temporary directory for convenience. Make it in the build tree --# simply because there is no reason to put it here, and in addition, -+# simply because there is no reason against having it here, and in addition, - # creating and moving files from /tmp can sometimes cause problems. --# Create a temporary directory, and hook for its removal unless debugging. -+# Hook for its removal unless debugging. -+# Note that there is a small window in which the directory will not be cleaned: -+# after its creation but before its name has been assigned to `$tmp'. - $debug || - { -- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 -+ tmp= -+ trap 'exit_status=$? -+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 - } -- - # Create a (secure) tmp directory for tmp files. - - { -- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && -+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" - } || - { -- tmp=./confstat$$-$RANDOM -- (umask 077 && mkdir $tmp) -+ tmp=./conf$$-$RANDOM -+ (umask 077 && mkdir "$tmp") - } || - { - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } - } - --_ACEOF -- --cat >>$CONFIG_STATUS <<_ACEOF -- - # --# CONFIG_FILES section. -+# Set up the sed scripts for CONFIG_FILES section. - # - - # No need to generate the scripts if there are no CONFIG_FILES. - # This happens for instance when ./config.status config.h --if test -n "\$CONFIG_FILES"; then -- # Protect against being on the right side of a sed subst in config.status. -- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; -- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF --s,@SHELL@,$SHELL,;t t --s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t --s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t --s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t --s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t --s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t --s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t --s,@exec_prefix@,$exec_prefix,;t t --s,@prefix@,$prefix,;t t --s,@program_transform_name@,$program_transform_name,;t t --s,@bindir@,$bindir,;t t --s,@sbindir@,$sbindir,;t t --s,@libexecdir@,$libexecdir,;t t --s,@datadir@,$datadir,;t t --s,@sysconfdir@,$sysconfdir,;t t --s,@sharedstatedir@,$sharedstatedir,;t t --s,@localstatedir@,$localstatedir,;t t --s,@libdir@,$libdir,;t t --s,@includedir@,$includedir,;t t --s,@oldincludedir@,$oldincludedir,;t t --s,@infodir@,$infodir,;t t --s,@mandir@,$mandir,;t t --s,@build_alias@,$build_alias,;t t --s,@host_alias@,$host_alias,;t t --s,@target_alias@,$target_alias,;t t --s,@DEFS@,$DEFS,;t t --s,@ECHO_C@,$ECHO_C,;t t --s,@ECHO_N@,$ECHO_N,;t t --s,@ECHO_T@,$ECHO_T,;t t --s,@LIBS@,$LIBS,;t t --s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t --s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t --s,@newlib_basedir@,$newlib_basedir,;t t --s,@build@,$build,;t t --s,@build_cpu@,$build_cpu,;t t --s,@build_vendor@,$build_vendor,;t t --s,@build_os@,$build_os,;t t --s,@host@,$host,;t t --s,@host_cpu@,$host_cpu,;t t --s,@host_vendor@,$host_vendor,;t t --s,@host_os@,$host_os,;t t --s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t --s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t --s,@INSTALL_DATA@,$INSTALL_DATA,;t t --s,@CYGPATH_W@,$CYGPATH_W,;t t --s,@PACKAGE@,$PACKAGE,;t t --s,@VERSION@,$VERSION,;t t --s,@ACLOCAL@,$ACLOCAL,;t t --s,@AUTOCONF@,$AUTOCONF,;t t --s,@AUTOMAKE@,$AUTOMAKE,;t t --s,@AUTOHEADER@,$AUTOHEADER,;t t --s,@MAKEINFO@,$MAKEINFO,;t t --s,@install_sh@,$install_sh,;t t --s,@STRIP@,$STRIP,;t t --s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t --s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t --s,@mkdir_p@,$mkdir_p,;t t --s,@AWK@,$AWK,;t t --s,@SET_MAKE@,$SET_MAKE,;t t --s,@am__leading_dot@,$am__leading_dot,;t t --s,@AMTAR@,$AMTAR,;t t --s,@am__tar@,$am__tar,;t t --s,@am__untar@,$am__untar,;t t --s,@CC@,$CC,;t t --s,@DEPDIR@,$DEPDIR,;t t --s,@am__include@,$am__include,;t t --s,@am__quote@,$am__quote,;t t --s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t --s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t --s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t --s,@CCDEPMODE@,$CCDEPMODE,;t t --s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t --s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t --s,@AS@,$AS,;t t --s,@ac_ct_AS@,$ac_ct_AS,;t t --s,@AR@,$AR,;t t --s,@ac_ct_AR@,$ac_ct_AR,;t t --s,@RANLIB@,$RANLIB,;t t --s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t --s,@READELF@,$READELF,;t t --s,@ac_ct_READELF@,$ac_ct_READELF,;t t --s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t --s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t --s,@MAINT@,$MAINT,;t t --s,@CCAS@,$CCAS,;t t --s,@CCASFLAGS@,$CCASFLAGS,;t t --s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t --s,@LDFLAGS@,$LDFLAGS,;t t --s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t --s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t --s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t --s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t --s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t --s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t --s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t --s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t --s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t --s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t --s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t --s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t --s,@OBJEXT@,$OBJEXT,;t t --s,@oext@,$oext,;t t --s,@aext@,$aext,;t t --s,@lpfx@,$lpfx,;t t --s,@libm_machine_dir@,$libm_machine_dir,;t t --s,@machine_dir@,$machine_dir,;t t --s,@sys_dir@,$sys_dir,;t t --s,@SED@,$SED,;t t --s,@DLLTOOL@,$DLLTOOL,;t t --s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t --s,@OBJDUMP@,$OBJDUMP,;t t --s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t --s,@LIBTOOL@,$LIBTOOL,;t t --s,@CFLAGS@,$CFLAGS,;t t --s,@CPPFLAGS@,$CPPFLAGS,;t t --s,@ac_ct_CC@,$ac_ct_CC,;t t --s,@EXEEXT@,$EXEEXT,;t t --s,@EGREP@,$EGREP,;t t --s,@FGREP@,$FGREP,;t t --s,@GREP@,$GREP,;t t --s,@LD@,$LD,;t t --s,@DUMPBIN@,$DUMPBIN,;t t --s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t --s,@NM@,$NM,;t t --s,@LN_S@,$LN_S,;t t --s,@lt_ECHO@,$lt_ECHO,;t t --s,@DSYMUTIL@,$DSYMUTIL,;t t --s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t --s,@NMEDIT@,$NMEDIT,;t t --s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t --s,@LIPO@,$LIPO,;t t --s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t --s,@OTOOL@,$OTOOL,;t t --s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t --s,@OTOOL64@,$OTOOL64,;t t --s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t --s,@CPP@,$CPP,;t t --s,@subdirs@,$subdirs,;t t --s,@HAVE_MACHINE_DIR_TRUE@,$HAVE_MACHINE_DIR_TRUE,;t t --s,@HAVE_MACHINE_DIR_FALSE@,$HAVE_MACHINE_DIR_FALSE,;t t --s,@LIBOBJS@,$LIBOBJS,;t t --s,@LTLIBOBJS@,$LTLIBOBJS,;t t --CEOF -- --_ACEOF -- -- cat >>$CONFIG_STATUS <<\_ACEOF -- # Split the substitutions into bite-sized pieces for seds with -- # small command number limits, like on Digital OSF/1 and HP-UX. -- ac_max_sed_lines=48 -- ac_sed_frag=1 # Number of current file. -- ac_beg=1 # First line for current file. -- ac_end=$ac_max_sed_lines # Line after last line for current file. -- ac_more_lines=: -- ac_sed_cmds= -- while $ac_more_lines; do -- if test $ac_beg -gt 1; then -- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- else -- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- fi -- if test ! -s $tmp/subs.frag; then -- ac_more_lines=false -- else -- # The purpose of the label and of the branching condition is to -- # speed up the sed processing (if there are no `@' at all, there -- # is no need to browse any of the substitutions). -- # These are the two extra sed commands mentioned above. -- (echo ':t -- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" -- else -- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" -- fi -- ac_sed_frag=`expr $ac_sed_frag + 1` -- ac_beg=$ac_end -- ac_end=`expr $ac_end + $ac_max_sed_lines` -- fi -- done -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds=cat -+if test -n "$CONFIG_FILES"; then -+ -+_ACEOF -+ -+ -+ -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ cat >conf$$subs.sed <<_ACEOF -+SHELL!$SHELL$ac_delim -+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -+PACKAGE_NAME!$PACKAGE_NAME$ac_delim -+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -+PACKAGE_STRING!$PACKAGE_STRING$ac_delim -+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -+exec_prefix!$exec_prefix$ac_delim -+prefix!$prefix$ac_delim -+program_transform_name!$program_transform_name$ac_delim -+bindir!$bindir$ac_delim -+sbindir!$sbindir$ac_delim -+libexecdir!$libexecdir$ac_delim -+datarootdir!$datarootdir$ac_delim -+datadir!$datadir$ac_delim -+sysconfdir!$sysconfdir$ac_delim -+sharedstatedir!$sharedstatedir$ac_delim -+localstatedir!$localstatedir$ac_delim -+includedir!$includedir$ac_delim -+oldincludedir!$oldincludedir$ac_delim -+docdir!$docdir$ac_delim -+infodir!$infodir$ac_delim -+htmldir!$htmldir$ac_delim -+dvidir!$dvidir$ac_delim -+pdfdir!$pdfdir$ac_delim -+psdir!$psdir$ac_delim -+libdir!$libdir$ac_delim -+localedir!$localedir$ac_delim -+mandir!$mandir$ac_delim -+DEFS!$DEFS$ac_delim -+ECHO_C!$ECHO_C$ac_delim -+ECHO_N!$ECHO_N$ac_delim -+ECHO_T!$ECHO_T$ac_delim -+LIBS!$LIBS$ac_delim -+build_alias!$build_alias$ac_delim -+host_alias!$host_alias$ac_delim -+target_alias!$target_alias$ac_delim -+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim -+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim -+newlib_basedir!$newlib_basedir$ac_delim -+build!$build$ac_delim -+build_cpu!$build_cpu$ac_delim -+build_vendor!$build_vendor$ac_delim -+build_os!$build_os$ac_delim -+host!$host$ac_delim -+host_cpu!$host_cpu$ac_delim -+host_vendor!$host_vendor$ac_delim -+host_os!$host_os$ac_delim -+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -+INSTALL_DATA!$INSTALL_DATA$ac_delim -+CYGPATH_W!$CYGPATH_W$ac_delim -+PACKAGE!$PACKAGE$ac_delim -+VERSION!$VERSION$ac_delim -+ACLOCAL!$ACLOCAL$ac_delim -+AUTOCONF!$AUTOCONF$ac_delim -+AUTOMAKE!$AUTOMAKE$ac_delim -+AUTOHEADER!$AUTOHEADER$ac_delim -+MAKEINFO!$MAKEINFO$ac_delim -+install_sh!$install_sh$ac_delim -+STRIP!$STRIP$ac_delim -+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim -+mkdir_p!$mkdir_p$ac_delim -+AWK!$AWK$ac_delim -+SET_MAKE!$SET_MAKE$ac_delim -+am__leading_dot!$am__leading_dot$ac_delim -+AMTAR!$AMTAR$ac_delim -+am__tar!$am__tar$ac_delim -+am__untar!$am__untar$ac_delim -+CC!$CC$ac_delim -+DEPDIR!$DEPDIR$ac_delim -+am__include!$am__include$ac_delim -+am__quote!$am__quote$ac_delim -+AMDEP_TRUE!$AMDEP_TRUE$ac_delim -+AMDEP_FALSE!$AMDEP_FALSE$ac_delim -+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim -+CCDEPMODE!$CCDEPMODE$ac_delim -+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim -+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim -+AS!$AS$ac_delim -+AR!$AR$ac_delim -+RANLIB!$RANLIB$ac_delim -+READELF!$READELF$ac_delim -+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim -+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim -+MAINT!$MAINT$ac_delim -+CCAS!$CCAS$ac_delim -+CCASFLAGS!$CCASFLAGS$ac_delim -+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim -+LDFLAGS!$LDFLAGS$ac_delim -+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim -+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim -+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim -+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim -+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim -+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim -+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim -+_ACEOF -+ -+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then -+ break -+ elif $ac_last_try; then -+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi --fi # test -n "$CONFIG_FILES" -+done -+ -+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -+if test -n "$ac_eof"; then -+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` -+ ac_eof=`expr $ac_eof + 1` -+fi -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -+_ACEOF -+sed ' -+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -+s/^/s,@/; s/!/@,|#_!!_#|/ -+:n -+t n -+s/'"$ac_delim"'$/,g/; t -+s/$/\\/; p -+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -+' >>$CONFIG_STATUS <conf$$subs.sed -+rm -f conf$$subs.sed -+cat >>$CONFIG_STATUS <<_ACEOF -+CEOF$ac_eof -+_ACEOF -+ -+ -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ cat >conf$$subs.sed <<_ACEOF -+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim -+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim -+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim -+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim -+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim -+OBJEXT!$OBJEXT$ac_delim -+oext!$oext$ac_delim -+aext!$aext$ac_delim -+lpfx!$lpfx$ac_delim -+libm_machine_dir!$libm_machine_dir$ac_delim -+machine_dir!$machine_dir$ac_delim -+sys_dir!$sys_dir$ac_delim -+SED!$SED$ac_delim -+DLLTOOL!$DLLTOOL$ac_delim -+OBJDUMP!$OBJDUMP$ac_delim -+LIBTOOL!$LIBTOOL$ac_delim -+CFLAGS!$CFLAGS$ac_delim -+CPPFLAGS!$CPPFLAGS$ac_delim -+ac_ct_CC!$ac_ct_CC$ac_delim -+EXEEXT!$EXEEXT$ac_delim -+GREP!$GREP$ac_delim -+EGREP!$EGREP$ac_delim -+FGREP!$FGREP$ac_delim -+LD!$LD$ac_delim -+DUMPBIN!$DUMPBIN$ac_delim -+ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim -+NM!$NM$ac_delim -+LN_S!$LN_S$ac_delim -+lt_ECHO!$lt_ECHO$ac_delim -+DSYMUTIL!$DSYMUTIL$ac_delim -+NMEDIT!$NMEDIT$ac_delim -+LIPO!$LIPO$ac_delim -+OTOOL!$OTOOL$ac_delim -+OTOOL64!$OTOOL64$ac_delim -+CPP!$CPP$ac_delim -+subdirs!$subdirs$ac_delim -+HAVE_MACHINE_DIR_TRUE!$HAVE_MACHINE_DIR_TRUE$ac_delim -+HAVE_MACHINE_DIR_FALSE!$HAVE_MACHINE_DIR_FALSE$ac_delim -+LIBOBJS!$LIBOBJS$ac_delim -+LTLIBOBJS!$LTLIBOBJS$ac_delim -+_ACEOF -+ -+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 40; then -+ break -+ elif $ac_last_try; then -+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " -+ fi -+done -+ -+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -+if test -n "$ac_eof"; then -+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` -+ ac_eof=`expr $ac_eof + 1` -+fi - -+cat >>$CONFIG_STATUS <<_ACEOF -+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -+_ACEOF -+sed ' -+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -+s/^/s,@/; s/!/@,|#_!!_#|/ -+:n -+t n -+s/'"$ac_delim"'$/,g/; t -+s/$/\\/; p -+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -+' >>$CONFIG_STATUS <conf$$subs.sed -+rm -f conf$$subs.sed -+cat >>$CONFIG_STATUS <<_ACEOF -+:end -+s/|#_!!_#|//g -+CEOF$ac_eof - _ACEOF -+ -+ -+# VPATH may cause trouble with some makes, so we remove $(srcdir), -+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). -+if test "x$srcdir" = x.; then -+ ac_vpsub='/^[ ]*VPATH[ ]*=/{ -+s/:*\$(srcdir):*/:/ -+s/:*\${srcdir}:*/:/ -+s/:*@srcdir@:*/:/ -+s/^\([^=]*=[ ]*\):*/\1/ -+s/:*$// -+s/^[^=]*=[ ]*$// -+}' -+fi -+ - cat >>$CONFIG_STATUS <<\_ACEOF --for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue -- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -- case $ac_file in -- - | *:- | *:-:* ) # input from stdin -- cat >$tmp/stdin -- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- * ) ac_file_in=$ac_file.in ;; -+fi # test -n "$CONFIG_FILES" -+ -+ -+for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS -+do -+ case $ac_tag in -+ :[FHLC]) ac_mode=$ac_tag; continue;; -+ esac -+ case $ac_mode$ac_tag in -+ :[FHL]*:*);; -+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -+echo "$as_me: error: Invalid tag $ac_tag." >&2;} -+ { (exit 1); exit 1; }; };; -+ :[FH]-) ac_tag=-:-;; -+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; -+ esac -+ ac_save_IFS=$IFS -+ IFS=: -+ set x $ac_tag -+ IFS=$ac_save_IFS -+ shift -+ ac_file=$1 -+ shift -+ -+ case $ac_mode in -+ :L) ac_source=$1;; -+ :[FH]) -+ ac_file_inputs= -+ for ac_f -+ do -+ case $ac_f in -+ -) ac_f="$tmp/stdin";; -+ *) # Look for the file first in the build tree, then in the source tree -+ # (if the path is not absolute). The absolute path cannot be DOS-style, -+ # because $ac_f cannot contain `:'. -+ test -f "$ac_f" || -+ case $ac_f in -+ [\\/$]*) false;; -+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; -+ esac || -+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -+echo "$as_me: error: cannot find input file: $ac_f" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+ ac_file_inputs="$ac_file_inputs $ac_f" -+ done -+ -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ configure_input="Generated from "`IFS=: -+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." -+ if test x"$ac_file" != x-; then -+ configure_input="$ac_file. $configure_input" -+ { echo "$as_me:$LINENO: creating $ac_file" >&5 -+echo "$as_me: creating $ac_file" >&6;} -+ fi -+ -+ case $ac_tag in -+ *:-:* | *:-) cat >"$tmp/stdin";; -+ esac -+ ;; - esac - -- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. -- ac_dir=`(dirname "$ac_file") 2>/dev/null || -+ ac_dir=`$as_dirname -- "$ac_file" || - $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ -- X"$ac_file" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || - echo X"$ac_file" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || - echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - ac_builddir=. - --if test "$ac_dir" != .; then -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac - -+ case $ac_mode in -+ :F) -+ # -+ # CONFIG_FILE -+ # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; -+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac -+_ACEOF - -- if test x"$ac_file" != x-; then -- { echo "$as_me:$LINENO: creating $ac_file" >&5 --echo "$as_me: creating $ac_file" >&6;} -- rm -f "$ac_file" -- fi -- # Let's still pretend it is `configure' which instantiates (i.e., don't -- # use $as_me), people would be surprised to read: -- # /* config.h. Generated by config.status. */ -- if test x"$ac_file" = x-; then -- configure_input= -- else -- configure_input="$ac_file. " -- fi -- configure_input=$configure_input"Generated from `echo $ac_file_in | -- sed 's,.*/,,'` by configure." -- -- # First look for the input files in the build tree, otherwise in the -- # src tree. -- ac_file_inputs=`IFS=: -- for f in $ac_file_in; do -- case $f in -- -) echo $tmp/stdin ;; -- [\\/$]*) -- # Absolute (can't be DOS-style, as IFS=:) -- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- echo "$f";; -- *) # Relative -- if test -f "$f"; then -- # Build tree -- echo "$f" -- elif test -f "$srcdir/$f"; then -- # Source tree -- echo "$srcdir/$f" -- else -- # /dev/null tree -- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- fi;; -- esac -- done` || { (exit 1); exit 1; } -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If the template does not know about datarootdir, expand it. -+# FIXME: This hack should be removed a few years after 2.60. -+ac_datarootdir_hack=; ac_datarootdir_seen= -+ -+case `sed -n '/datarootdir/ { -+ p -+ q -+} -+/@datadir@/p -+/@docdir@/p -+/@infodir@/p -+/@localedir@/p -+/@mandir@/p -+' $ac_file_inputs` in -+*datarootdir*) ac_datarootdir_seen=yes;; -+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) -+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ ac_datarootdir_hack=' -+ s&@datadir@&$datadir&g -+ s&@docdir@&$docdir&g -+ s&@infodir@&$infodir&g -+ s&@localedir@&$localedir&g -+ s&@mandir@&$mandir&g -+ s&\\\${datarootdir}&$datarootdir&g' ;; -+esac - _ACEOF -+ -+# Neutralize VPATH when `$srcdir' = `.'. -+# Shell code in configure.ac might set extrasub. -+# FIXME: do we really want to maintain this feature? - cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub - $extrasub -@@ -12859,142 +13973,43 @@ - cat >>$CONFIG_STATUS <<\_ACEOF - :t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b --s,@configure_input@,$configure_input,;t t --s,@srcdir@,$ac_srcdir,;t t --s,@abs_srcdir@,$ac_abs_srcdir,;t t --s,@top_srcdir@,$ac_top_srcdir,;t t --s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t --s,@builddir@,$ac_builddir,;t t --s,@abs_builddir@,$ac_abs_builddir,;t t --s,@top_builddir@,$ac_top_builddir,;t t --s,@abs_top_builddir@,$ac_abs_top_builddir,;t t --s,@INSTALL@,$ac_INSTALL,;t t --" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out -- rm -f $tmp/stdin -- if test x"$ac_file" != x-; then -- mv $tmp/out $ac_file -- else -- cat $tmp/out -- rm -f $tmp/out -- fi -- --done --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -- --# --# CONFIG_COMMANDS section. --# --for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue -- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` -- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_dir=`(dirname "$ac_dest") 2>/dev/null || --$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$ac_dest" : 'X\(//\)[^/]' \| \ -- X"$ac_dest" : 'X\(//\)$' \| \ -- X"$ac_dest" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$ac_dest" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X\(//\)[^/]' \| \ -- X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -- { (exit 1); exit 1; }; }; } -+s&@configure_input@&$configure_input&;t t -+s&@top_builddir@&$ac_top_builddir_sub&;t t -+s&@srcdir@&$ac_srcdir&;t t -+s&@abs_srcdir@&$ac_abs_srcdir&;t t -+s&@top_srcdir@&$ac_top_srcdir&;t t -+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -+s&@builddir@&$ac_builddir&;t t -+s&@abs_builddir@&$ac_abs_builddir&;t t -+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -+s&@INSTALL@&$ac_INSTALL&;t t -+$ac_datarootdir_hack -+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out -+ -+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&5 -+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&2;} - -- ac_builddir=. -- --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ rm -f "$tmp/stdin" -+ case $ac_file in -+ -) cat "$tmp/out"; rm -f "$tmp/out";; -+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; -+ esac -+ ;; - --case $srcdir in -- .) # No --srcdir option. We are building in place. -- ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -- ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac - --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac -+ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 -+echo "$as_me: executing $ac_file commands" >&6;} -+ ;; -+ esac - - -- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 --echo "$as_me: executing $ac_dest commands" >&6;} -- case $ac_dest in -- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do -+ case $ac_file$ac_mode in -+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. -@@ -13004,18 +14019,29 @@ - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then -- dirpart=`(dirname "$mf") 2>/dev/null || -+ dirpart=`$as_dirname -- "$mf" || - $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ -- X"$mf" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$mf" : 'X\(/\)' \| . 2>/dev/null || - echo X"$mf" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - else - continue - fi -@@ -13037,49 +14063,76 @@ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue -- fdir=`(dirname "$file") 2>/dev/null || -+ fdir=`$as_dirname -- "$file" || - $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ -- X"$file" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$file" : 'X\(/\)' \| . 2>/dev/null || - echo X"$file" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p $dirpart/$fdir -- else -- as_dir=$dirpart/$fdir -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir=$dirpart/$fdir -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || - echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 --echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done - ;; -- libtool ) -+ "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. -@@ -13720,11 +14773,10 @@ - chmod +x "$ofile" - - ;; -+ - esac --done --_ACEOF -+done # for ac_tag - --cat >>$CONFIG_STATUS <<\_ACEOF - - { (exit 0); exit 0; } - _ACEOF -@@ -13754,7 +14806,7 @@ - fi - - # --# CONFIG_SUBDIRS section, as fixed in confsubdir.m4. -+# CONFIG_SUBDIRS section. - # - if test "$no_recursion" != yes; then - -@@ -13801,7 +14853,12 @@ - case $ac_arg in - *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac -- ac_sub_configure_args="$ac_arg $ac_sub_configure_args" -+ ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" -+ -+ # Pass --silent -+ if test "$silent" = yes; then -+ ac_sub_configure_args="--silent $ac_sub_configure_args" -+ fi - - ac_popdir=`pwd` - for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue -@@ -13810,97 +14867,83 @@ - # parts of a large source tree are present. - test -d "$srcdir/$ac_dir" || continue - -- { echo "$as_me:$LINENO: configuring in $ac_dir" >&5 --echo "$as_me: configuring in $ac_dir" >&6;} -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -+ ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" -+ echo "$as_me:$LINENO: $ac_msg" >&5 -+ echo "$ac_msg" >&6 -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || - echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - ac_builddir=. - --if test "$ac_dir" != .; then -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -- --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; - esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - cd "$ac_dir" -@@ -13924,8 +14967,8 @@ - # Make the cache file name correct relative to the subdirectory. - case $cache_file in - [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; -- *) # Relative path. -- ac_sub_cache_file=$ac_top_builddir$cache_file ;; -+ *) # Relative name. -+ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; - esac - - { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 -diff -Naur newlib-1.17.0/newlib/libc/machine/configure.in newlib-1.17.0-new/newlib/libc/machine/configure.in ---- newlib-1.17.0/newlib/libc/machine/configure.in 2008-12-11 21:05:38.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/machine/configure.in 2009-05-22 09:57:50.000000000 +0200 -@@ -24,6 +24,7 @@ - case ${machine_dir} in - a29k) AC_CONFIG_SUBDIRS(a29k) ;; - arm) AC_CONFIG_SUBDIRS(arm) ;; -+ avr32) AC_CONFIG_SUBDIRS(avr32) ;; - bfin) AC_CONFIG_SUBDIRS(bfin) ;; - cris) AC_CONFIG_SUBDIRS(cris) ;; - crx) AC_CONFIG_SUBDIRS(crx) ;; -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4 ---- newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,366 @@ -+dnl aclocal.m4 generated automatically by aclocal 1.4-p6 -+ -+dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -+dnl This file is free software; the Free Software Foundation -+dnl gives unlimited permission to copy and/or distribute it, -+dnl with or without modifications, as long as this notice is preserved. -+ -+dnl This program is distributed in the hope that it will be useful, -+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -+dnl PARTICULAR PURPOSE. -+ -+dnl This provides configure definitions used by all the newlib -+dnl configure.in files. -+ -+dnl Basic newlib configury. This calls basic introductory stuff, -+dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs -+dnl configure.host. The only argument is the relative path to the top -+dnl newlib directory. -+ -+AC_DEFUN(NEWLIB_CONFIGURE, -+[ -+dnl Default to --enable-multilib -+AC_ARG_ENABLE(multilib, -+[ --enable-multilib build many library versions (default)], -+[case "${enableval}" in -+ yes) multilib=yes ;; -+ no) multilib=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; -+ esac], [multilib=yes])dnl -+ -+dnl Support --enable-target-optspace -+AC_ARG_ENABLE(target-optspace, -+[ --enable-target-optspace optimize for space], -+[case "${enableval}" in -+ yes) target_optspace=yes ;; -+ no) target_optspace=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; -+ esac], [target_optspace=])dnl -+ -+dnl Support --enable-malloc-debugging - currently only supported for Cygwin -+AC_ARG_ENABLE(malloc-debugging, -+[ --enable-malloc-debugging indicate malloc debugging requested], -+[case "${enableval}" in -+ yes) malloc_debugging=yes ;; -+ no) malloc_debugging=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; -+ esac], [malloc_debugging=])dnl -+ -+dnl Support --enable-newlib-multithread -+AC_ARG_ENABLE(newlib-multithread, -+[ --enable-newlib-multithread enable support for multiple threads], -+[case "${enableval}" in -+ yes) newlib_multithread=yes ;; -+ no) newlib_multithread=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; -+ esac], [newlib_multithread=yes])dnl -+ -+dnl Support --enable-newlib-iconv -+AC_ARG_ENABLE(newlib-iconv, -+[ --enable-newlib-iconv enable iconv library support], -+[if test "${newlib_iconv+set}" != set; then -+ case "${enableval}" in -+ yes) newlib_iconv=yes ;; -+ no) newlib_iconv=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; -+ esac -+ fi], [newlib_iconv=${newlib_iconv}])dnl -+ -+dnl Support --enable-newlib-elix-level -+AC_ARG_ENABLE(newlib-elix-level, -+[ --enable-newlib-elix-level supply desired elix library level (1-4)], -+[case "${enableval}" in -+ 0) newlib_elix_level=0 ;; -+ 1) newlib_elix_level=1 ;; -+ 2) newlib_elix_level=2 ;; -+ 3) newlib_elix_level=3 ;; -+ 4) newlib_elix_level=4 ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; -+ esac], [newlib_elix_level=0])dnl -+ -+dnl Support --disable-newlib-io-float -+AC_ARG_ENABLE(newlib-io-float, -+[ --disable-newlib-io-float disable printf/scanf family float support], -+[case "${enableval}" in -+ yes) newlib_io_float=yes ;; -+ no) newlib_io_float=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; -+ esac], [newlib_io_float=yes])dnl -+ -+dnl Support --disable-newlib-supplied-syscalls -+AC_ARG_ENABLE(newlib-supplied-syscalls, -+[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], -+[case "${enableval}" in -+ yes) newlib_may_supply_syscalls=yes ;; -+ no) newlib_may_supply_syscalls=no ;; -+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; -+ esac], [newlib_may_supply_syscalls=yes])dnl -+ -+AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) -+ -+dnl We may get other options which we don't document: -+dnl --with-target-subdir, --with-multisrctop, --with-multisubdir -+ -+test -z "[$]{with_target_subdir}" && with_target_subdir=. -+ -+if test "[$]{srcdir}" = "."; then -+ if test "[$]{with_target_subdir}" != "."; then -+ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" -+ else -+ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" -+ fi -+else -+ newlib_basedir="[$]{srcdir}/$1" -+fi -+AC_SUBST(newlib_basedir) -+ -+AC_CANONICAL_SYSTEM -+ -+AM_INIT_AUTOMAKE(newlib, 1.14.0.atmel.1.0.1) -+ -+# FIXME: We temporarily define our own version of AC_PROG_CC. This is -+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -+# are probably using a cross compiler, which will not be able to fully -+# link an executable. This should really be fixed in autoconf -+# itself. -+ -+AC_DEFUN(LIB_AC_PROG_CC, -+[AC_BEFORE([$0], [AC_PROG_CPP])dnl -+AC_CHECK_PROG(CC, gcc, gcc) -+if test -z "$CC"; then -+ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) -+ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) -+fi -+ -+AC_PROG_CC_GNU -+ -+if test $ac_cv_prog_gcc = yes; then -+ GCC=yes -+dnl Check whether -g works, even if CFLAGS is set, in case the package -+dnl plays around with CFLAGS (such as to build both debugging and -+dnl normal versions of a library), tasteless as that idea is. -+ ac_test_CFLAGS="${CFLAGS+set}" -+ ac_save_CFLAGS="$CFLAGS" -+ CFLAGS= -+ AC_PROG_CC_G -+ if test "$ac_test_CFLAGS" = set; then -+ CFLAGS="$ac_save_CFLAGS" -+ elif test $ac_cv_prog_cc_g = yes; then -+ CFLAGS="-g -O2" -+ else -+ CFLAGS="-O2" -+ fi -+else -+ GCC= -+ test "${CFLAGS+set}" = set || CFLAGS="-g" -+fi -+]) -+ -+LIB_AC_PROG_CC -+ -+AC_CHECK_TOOL(AS, as) -+AC_CHECK_TOOL(AR, ar) -+AC_CHECK_TOOL(RANLIB, ranlib, :) -+ -+AC_PROG_INSTALL -+ -+AM_MAINTAINER_MODE -+ -+# We need AC_EXEEXT to keep automake happy in cygnus mode. However, -+# at least currently, we never actually build a program, so we never -+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally -+# fails, because we are probably configuring with a cross compiler -+# which can't create executables. So we include AC_EXEEXT to keep -+# automake happy, but we don't execute it, since we don't care about -+# the result. -+if false; then -+ AC_EXEEXT -+fi -+ -+. [$]{newlib_basedir}/configure.host -+ -+newlib_cflags="[$]{newlib_cflags} -fno-builtin" -+ -+NEWLIB_CFLAGS=${newlib_cflags} -+AC_SUBST(NEWLIB_CFLAGS) -+ -+LDFLAGS=${ldflags} -+AC_SUBST(LDFLAGS) -+ -+AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) -+AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) -+AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) -+AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) -+AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) -+ -+AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) -+ -+# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we -+# use oext, which is set in configure.host based on the target platform. -+OBJEXT=${oext} -+ -+AC_SUBST(OBJEXT) -+AC_SUBST(oext) -+AC_SUBST(aext) -+ -+AC_SUBST(libm_machine_dir) -+AC_SUBST(machine_dir) -+AC_SUBST(sys_dir) -+]) -+ -+# Do all the work for Automake. This macro actually does too much -- -+# some checks are only needed if your package does certain things. -+# But this isn't really a big deal. -+ -+# serial 1 -+ -+dnl Usage: -+dnl AM_INIT_AUTOMAKE(package,version, [no-define]) -+ -+AC_DEFUN([AM_INIT_AUTOMAKE], -+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -+AC_REQUIRE([AC_PROG_INSTALL]) -+PACKAGE=[$1] -+AC_SUBST(PACKAGE) -+VERSION=[$2] -+AC_SUBST(VERSION) -+dnl test to see if srcdir already configured -+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then -+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -+fi -+ifelse([$3],, -+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) -+AC_REQUIRE([AM_SANITY_CHECK]) -+AC_REQUIRE([AC_ARG_PROGRAM]) -+dnl FIXME This is truly gross. -+missing_dir=`cd $ac_aux_dir && pwd` -+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) -+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) -+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) -+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) -+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) -+AC_REQUIRE([AC_PROG_MAKE_SET])]) -+ -+# Copyright 2002 Free Software Foundation, Inc. -+ -+# This program is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2, or (at your option) -+# any later version. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+ -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -+ -+# AM_AUTOMAKE_VERSION(VERSION) -+# ---------------------------- -+# Automake X.Y traces this macro to ensure aclocal.m4 has been -+# generated from the m4 files accompanying Automake X.Y. -+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) -+ -+# AM_SET_CURRENT_AUTOMAKE_VERSION -+# ------------------------------- -+# Call AM_AUTOMAKE_VERSION so it can be traced. -+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -+ [AM_AUTOMAKE_VERSION([1.4-p6])]) -+ -+# -+# Check to make sure that the build environment is sane. -+# -+ -+AC_DEFUN([AM_SANITY_CHECK], -+[AC_MSG_CHECKING([whether build environment is sane]) -+# Just in case -+sleep 1 -+echo timestamp > conftestfile -+# Do `set' in a subshell so we don't clobber the current shell's -+# arguments. Must try -L first in case configure is actually a -+# symlink; some systems play weird games with the mod time of symlinks -+# (eg FreeBSD returns the mod time of the symlink's containing -+# directory). -+if ( -+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` -+ if test "[$]*" = "X"; then -+ # -L didn't work. -+ set X `ls -t $srcdir/configure conftestfile` -+ fi -+ if test "[$]*" != "X $srcdir/configure conftestfile" \ -+ && test "[$]*" != "X conftestfile $srcdir/configure"; then -+ -+ # If neither matched, then we have a broken ls. This can happen -+ # if, for instance, CONFIG_SHELL is bash and it inherits a -+ # broken ls alias from the environment. This has actually -+ # happened. Such a system could not be considered "sane". -+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -+alias in your environment]) -+ fi -+ -+ test "[$]2" = conftestfile -+ ) -+then -+ # Ok. -+ : -+else -+ AC_MSG_ERROR([newly created file is older than distributed files! -+Check your system clock]) -+fi -+rm -f conftest* -+AC_MSG_RESULT(yes)]) -+ -+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) -+dnl The program must properly implement --version. -+AC_DEFUN([AM_MISSING_PROG], -+[AC_MSG_CHECKING(for working $2) -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if ($2 --version) < /dev/null > /dev/null 2>&1; then -+ $1=$2 -+ AC_MSG_RESULT(found) -+else -+ $1="$3/missing $2" -+ AC_MSG_RESULT(missing) -+fi -+AC_SUBST($1)]) -+ -+# Define a conditional. -+ -+AC_DEFUN([AM_CONDITIONAL], -+[AC_SUBST($1_TRUE) -+AC_SUBST($1_FALSE) -+if $2; then -+ $1_TRUE= -+ $1_FALSE='#' -+else -+ $1_TRUE='#' -+ $1_FALSE= -+fi]) -+ -+# Add --enable-maintainer-mode option to configure. -+# From Jim Meyering -+ -+# serial 1 -+ -+AC_DEFUN([AM_MAINTAINER_MODE], -+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) -+ dnl maintainer-mode is disabled by default -+ AC_ARG_ENABLE(maintainer-mode, -+[ --enable-maintainer-mode enable make rules and dependencies not useful -+ (and sometimes confusing) to the casual installer], -+ USE_MAINTAINER_MODE=$enableval, -+ USE_MAINTAINER_MODE=no) -+ AC_MSG_RESULT($USE_MAINTAINER_MODE) -+ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) -+ MAINT=$MAINTAINER_MODE_TRUE -+ AC_SUBST(MAINT)dnl -+] -+) -+ -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h ---- newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1 @@ -+ -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure newlib-1.17.0-new/newlib/libc/sys/avr32/configure ---- newlib-1.17.0/newlib/libc/sys/avr32/configure 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,3922 @@ -+#! /bin/sh -+# Guess values for system-dependent variables and create Makefiles. -+# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION. -+# -+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+# This configure script is free software; the Free Software Foundation -+# gives unlimited permission to copy, distribute and modify it. -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename -- "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH -+ -+ -+if test "x$CONFIG_SHELL" = x; then -+ if (eval ":") 2>/dev/null; then -+ as_have_required=yes -+else -+ as_have_required=no -+fi -+ -+ if test $as_have_required = yes && (eval ": -+(as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=\$LINENO -+ as_lineno_2=\$LINENO -+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && -+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -+") 2> /dev/null; then -+ : -+else -+ as_candidate_shells= -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ case $as_dir in -+ /*) -+ for as_base in sh bash ksh sh5; do -+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" -+ done;; -+ esac -+done -+IFS=$as_save_IFS -+ -+ -+ for as_shell in $as_candidate_shells $SHELL; do -+ # Try only shells that exist, to save several forks. -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { ("$as_shell") 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+_ASEOF -+}; then -+ CONFIG_SHELL=$as_shell -+ as_have_required=yes -+ if { "$as_shell" 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+(as_func_return () { -+ (exit $1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = "$1" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test $exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -+ -+_ASEOF -+}; then -+ break -+fi -+ -+fi -+ -+ done -+ -+ if test "x$CONFIG_SHELL" != x; then -+ for as_var in BASH_ENV ENV -+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ done -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ -+ if test $as_have_required = no; then -+ echo This script requires a shell more modern than all the -+ echo shells that I found on your system. Please install a -+ echo modern shell, or manually run the script under such a -+ echo shell if you do have one. -+ { (exit 1); exit 1; } -+fi -+ -+ -+fi -+ -+fi -+ -+ -+ -+(eval "as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0") || { -+ echo No shell found that supports shell functions. -+ echo Please tell autoconf@gnu.org about your system, -+ echo including any error possibly output before this -+ echo message -+} -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | -+ sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno -+ N -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -+ t loop -+ s/-\n.*// -+ ' >$as_me.lineno && -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+ -+exec 7<&0 </dev/null 6>&1 -+ -+# Name of the host. -+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -+# so uname gets run too. -+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -+ -+# -+# Initializations. -+# -+ac_default_prefix=/usr/local -+ac_clean_files= -+ac_config_libobj_dir=. -+LIBOBJS= -+cross_compiling=no -+subdirs= -+MFLAGS= -+MAKEFLAGS= -+SHELL=${CONFIG_SHELL-/bin/sh} -+ -+# Identity of this package. -+PACKAGE_NAME='newlib' -+PACKAGE_TARNAME='newlib' -+PACKAGE_VERSION='NEWLIB_VERSION' -+PACKAGE_STRING='newlib NEWLIB_VERSION' -+PACKAGE_BUGREPORT='' -+ -+ac_subst_vars='SHELL -+PATH_SEPARATOR -+PACKAGE_NAME -+PACKAGE_TARNAME -+PACKAGE_VERSION -+PACKAGE_STRING -+PACKAGE_BUGREPORT -+exec_prefix -+prefix -+program_transform_name -+bindir -+sbindir -+libexecdir -+datarootdir -+datadir -+sysconfdir -+sharedstatedir -+localstatedir -+includedir -+oldincludedir -+docdir -+infodir -+htmldir -+dvidir -+pdfdir -+psdir -+libdir -+localedir -+mandir -+DEFS -+ECHO_C -+ECHO_N -+ECHO_T -+LIBS -+build_alias -+host_alias -+target_alias -+MAY_SUPPLY_SYSCALLS_TRUE -+MAY_SUPPLY_SYSCALLS_FALSE -+newlib_basedir -+build -+build_cpu -+build_vendor -+build_os -+host -+host_cpu -+host_vendor -+host_os -+target -+target_cpu -+target_vendor -+target_os -+INSTALL_PROGRAM -+INSTALL_SCRIPT -+INSTALL_DATA -+PACKAGE -+VERSION -+ACLOCAL -+AUTOCONF -+AUTOMAKE -+AUTOHEADER -+MAKEINFO -+SET_MAKE -+CC -+AS -+AR -+RANLIB -+MAINTAINER_MODE_TRUE -+MAINTAINER_MODE_FALSE -+MAINT -+NEWLIB_CFLAGS -+LDFLAGS -+ELIX_LEVEL_0_TRUE -+ELIX_LEVEL_0_FALSE -+ELIX_LEVEL_1_TRUE -+ELIX_LEVEL_1_FALSE -+ELIX_LEVEL_2_TRUE -+ELIX_LEVEL_2_FALSE -+ELIX_LEVEL_3_TRUE -+ELIX_LEVEL_3_FALSE -+ELIX_LEVEL_4_TRUE -+ELIX_LEVEL_4_FALSE -+USE_LIBTOOL_TRUE -+USE_LIBTOOL_FALSE -+OBJEXT -+oext -+aext -+libm_machine_dir -+machine_dir -+sys_dir -+LIBOBJS -+LTLIBOBJS' -+ac_subst_files='' -+ ac_precious_vars='build_alias -+host_alias -+target_alias' -+ -+ -+# Initialize some variables set by options. -+ac_init_help= -+ac_init_version=false -+# The variables have the same names as the options, with -+# dashes changed to underlines. -+cache_file=/dev/null -+exec_prefix=NONE -+no_create= -+no_recursion= -+prefix=NONE -+program_prefix=NONE -+program_suffix=NONE -+program_transform_name=s,x,x, -+silent= -+site= -+srcdir= -+verbose= -+x_includes=NONE -+x_libraries=NONE -+ -+# Installation directory options. -+# These are left unexpanded so users can "make install exec_prefix=/foo" -+# and all the variables that are supposed to be based on exec_prefix -+# by default will actually change. -+# Use braces instead of parens because sh, perl, etc. also accept them. -+# (The list follows the same order as the GNU Coding Standards.) -+bindir='${exec_prefix}/bin' -+sbindir='${exec_prefix}/sbin' -+libexecdir='${exec_prefix}/libexec' -+datarootdir='${prefix}/share' -+datadir='${datarootdir}' -+sysconfdir='${prefix}/etc' -+sharedstatedir='${prefix}/com' -+localstatedir='${prefix}/var' -+includedir='${prefix}/include' -+oldincludedir='/usr/include' -+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -+infodir='${datarootdir}/info' -+htmldir='${docdir}' -+dvidir='${docdir}' -+pdfdir='${docdir}' -+psdir='${docdir}' -+libdir='${exec_prefix}/lib' -+localedir='${datarootdir}/locale' -+mandir='${datarootdir}/man' -+ -+ac_prev= -+ac_dashdash= -+for ac_option -+do -+ # If the previous option needs an argument, assign it. -+ if test -n "$ac_prev"; then -+ eval $ac_prev=\$ac_option -+ ac_prev= -+ continue -+ fi -+ -+ case $ac_option in -+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *) ac_optarg=yes ;; -+ esac -+ -+ # Accept the important Cygnus configure options, so we can diagnose typos. -+ -+ case $ac_dashdash$ac_option in -+ --) -+ ac_dashdash=yes ;; -+ -+ -bindir | --bindir | --bindi | --bind | --bin | --bi) -+ ac_prev=bindir ;; -+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) -+ bindir=$ac_optarg ;; -+ -+ -build | --build | --buil | --bui | --bu) -+ ac_prev=build_alias ;; -+ -build=* | --build=* | --buil=* | --bui=* | --bu=*) -+ build_alias=$ac_optarg ;; -+ -+ -cache-file | --cache-file | --cache-fil | --cache-fi \ -+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) -+ ac_prev=cache_file ;; -+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ -+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) -+ cache_file=$ac_optarg ;; -+ -+ --config-cache | -C) -+ cache_file=config.cache ;; -+ -+ -datadir | --datadir | --datadi | --datad) -+ ac_prev=datadir ;; -+ -datadir=* | --datadir=* | --datadi=* | --datad=*) -+ datadir=$ac_optarg ;; -+ -+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ -+ | --dataroo | --dataro | --datar) -+ ac_prev=datarootdir ;; -+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ -+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) -+ datarootdir=$ac_optarg ;; -+ -+ -disable-* | --disable-*) -+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=no ;; -+ -+ -docdir | --docdir | --docdi | --doc | --do) -+ ac_prev=docdir ;; -+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) -+ docdir=$ac_optarg ;; -+ -+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) -+ ac_prev=dvidir ;; -+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) -+ dvidir=$ac_optarg ;; -+ -+ -enable-* | --enable-*) -+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=\$ac_optarg ;; -+ -+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ -+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -+ | --exec | --exe | --ex) -+ ac_prev=exec_prefix ;; -+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ -+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ -+ | --exec=* | --exe=* | --ex=*) -+ exec_prefix=$ac_optarg ;; -+ -+ -gas | --gas | --ga | --g) -+ # Obsolete; use --with-gas. -+ with_gas=yes ;; -+ -+ -help | --help | --hel | --he | -h) -+ ac_init_help=long ;; -+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) -+ ac_init_help=recursive ;; -+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) -+ ac_init_help=short ;; -+ -+ -host | --host | --hos | --ho) -+ ac_prev=host_alias ;; -+ -host=* | --host=* | --hos=* | --ho=*) -+ host_alias=$ac_optarg ;; -+ -+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) -+ ac_prev=htmldir ;; -+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ -+ | --ht=*) -+ htmldir=$ac_optarg ;; -+ -+ -includedir | --includedir | --includedi | --included | --include \ -+ | --includ | --inclu | --incl | --inc) -+ ac_prev=includedir ;; -+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ -+ | --includ=* | --inclu=* | --incl=* | --inc=*) -+ includedir=$ac_optarg ;; -+ -+ -infodir | --infodir | --infodi | --infod | --info | --inf) -+ ac_prev=infodir ;; -+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) -+ infodir=$ac_optarg ;; -+ -+ -libdir | --libdir | --libdi | --libd) -+ ac_prev=libdir ;; -+ -libdir=* | --libdir=* | --libdi=* | --libd=*) -+ libdir=$ac_optarg ;; -+ -+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ -+ | --libexe | --libex | --libe) -+ ac_prev=libexecdir ;; -+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ -+ | --libexe=* | --libex=* | --libe=*) -+ libexecdir=$ac_optarg ;; -+ -+ -localedir | --localedir | --localedi | --localed | --locale) -+ ac_prev=localedir ;; -+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) -+ localedir=$ac_optarg ;; -+ -+ -localstatedir | --localstatedir | --localstatedi | --localstated \ -+ | --localstate | --localstat | --localsta | --localst | --locals) -+ ac_prev=localstatedir ;; -+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ -+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) -+ localstatedir=$ac_optarg ;; -+ -+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) -+ ac_prev=mandir ;; -+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) -+ mandir=$ac_optarg ;; -+ -+ -nfp | --nfp | --nf) -+ # Obsolete; use --without-fp. -+ with_fp=no ;; -+ -+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ -+ | --no-cr | --no-c | -n) -+ no_create=yes ;; -+ -+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ -+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) -+ no_recursion=yes ;; -+ -+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ -+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ -+ | --oldin | --oldi | --old | --ol | --o) -+ ac_prev=oldincludedir ;; -+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ -+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ -+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) -+ oldincludedir=$ac_optarg ;; -+ -+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) -+ ac_prev=prefix ;; -+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) -+ prefix=$ac_optarg ;; -+ -+ -program-prefix | --program-prefix | --program-prefi | --program-pref \ -+ | --program-pre | --program-pr | --program-p) -+ ac_prev=program_prefix ;; -+ -program-prefix=* | --program-prefix=* | --program-prefi=* \ -+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) -+ program_prefix=$ac_optarg ;; -+ -+ -program-suffix | --program-suffix | --program-suffi | --program-suff \ -+ | --program-suf | --program-su | --program-s) -+ ac_prev=program_suffix ;; -+ -program-suffix=* | --program-suffix=* | --program-suffi=* \ -+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) -+ program_suffix=$ac_optarg ;; -+ -+ -program-transform-name | --program-transform-name \ -+ | --program-transform-nam | --program-transform-na \ -+ | --program-transform-n | --program-transform- \ -+ | --program-transform | --program-transfor \ -+ | --program-transfo | --program-transf \ -+ | --program-trans | --program-tran \ -+ | --progr-tra | --program-tr | --program-t) -+ ac_prev=program_transform_name ;; -+ -program-transform-name=* | --program-transform-name=* \ -+ | --program-transform-nam=* | --program-transform-na=* \ -+ | --program-transform-n=* | --program-transform-=* \ -+ | --program-transform=* | --program-transfor=* \ -+ | --program-transfo=* | --program-transf=* \ -+ | --program-trans=* | --program-tran=* \ -+ | --progr-tra=* | --program-tr=* | --program-t=*) -+ program_transform_name=$ac_optarg ;; -+ -+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) -+ ac_prev=pdfdir ;; -+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) -+ pdfdir=$ac_optarg ;; -+ -+ -psdir | --psdir | --psdi | --psd | --ps) -+ ac_prev=psdir ;; -+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) -+ psdir=$ac_optarg ;; -+ -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil) -+ silent=yes ;; -+ -+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) -+ ac_prev=sbindir ;; -+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ -+ | --sbi=* | --sb=*) -+ sbindir=$ac_optarg ;; -+ -+ -sharedstatedir | --sharedstatedir | --sharedstatedi \ -+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ -+ | --sharedst | --shareds | --shared | --share | --shar \ -+ | --sha | --sh) -+ ac_prev=sharedstatedir ;; -+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ -+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ -+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ -+ | --sha=* | --sh=*) -+ sharedstatedir=$ac_optarg ;; -+ -+ -site | --site | --sit) -+ ac_prev=site ;; -+ -site=* | --site=* | --sit=*) -+ site=$ac_optarg ;; -+ -+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) -+ ac_prev=srcdir ;; -+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) -+ srcdir=$ac_optarg ;; -+ -+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ -+ | --syscon | --sysco | --sysc | --sys | --sy) -+ ac_prev=sysconfdir ;; -+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ -+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) -+ sysconfdir=$ac_optarg ;; -+ -+ -target | --target | --targe | --targ | --tar | --ta | --t) -+ ac_prev=target_alias ;; -+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) -+ target_alias=$ac_optarg ;; -+ -+ -v | -verbose | --verbose | --verbos | --verbo | --verb) -+ verbose=yes ;; -+ -+ -version | --version | --versio | --versi | --vers | -V) -+ ac_init_version=: ;; -+ -+ -with-* | --with-*) -+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=\$ac_optarg ;; -+ -+ -without-* | --without-*) -+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=no ;; -+ -+ --x) -+ # Obsolete; use --with-x. -+ with_x=yes ;; -+ -+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ -+ | --x-incl | --x-inc | --x-in | --x-i) -+ ac_prev=x_includes ;; -+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ -+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) -+ x_includes=$ac_optarg ;; -+ -+ -x-libraries | --x-libraries | --x-librarie | --x-librari \ -+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) -+ ac_prev=x_libraries ;; -+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ -+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) -+ x_libraries=$ac_optarg ;; -+ -+ -*) { echo "$as_me: error: unrecognized option: $ac_option -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } -+ ;; -+ -+ *=*) -+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -+ { (exit 1); exit 1; }; } -+ eval $ac_envvar=\$ac_optarg -+ export $ac_envvar ;; -+ -+ *) -+ # FIXME: should be removed in autoconf 3.0. -+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} -+ ;; -+ -+ esac -+done -+ -+if test -n "$ac_prev"; then -+ ac_option=--`echo $ac_prev | sed 's/_/-/g'` -+ { echo "$as_me: error: missing argument to $ac_option" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ -+# Be sure to have absolute directory names. -+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ -+ datadir sysconfdir sharedstatedir localstatedir includedir \ -+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ -+ libdir localedir mandir -+do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ [\\/$]* | ?:[\\/]* ) continue;; -+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; -+ esac -+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; } -+done -+ -+# There might be people who depend on the old broken behavior: `$host' -+# used to hold the argument of --host etc. -+# FIXME: To remove some day. -+build=$build_alias -+host=$host_alias -+target=$target_alias -+ -+# FIXME: To remove some day. -+if test "x$host_alias" != x; then -+ if test "x$build_alias" = x; then -+ cross_compiling=maybe -+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -+ If a cross compiler is detected then cross compile mode will be used." >&2 -+ elif test "x$build_alias" != "x$host_alias"; then -+ cross_compiling=yes -+ fi -+fi -+ -+ac_tool_prefix= -+test -n "$host_alias" && ac_tool_prefix=$host_alias- -+ -+test "$silent" = yes && exec 6>/dev/null -+ -+ -+ac_pwd=`pwd` && test -n "$ac_pwd" && -+ac_ls_di=`ls -di .` && -+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -+ { echo "$as_me: error: Working directory cannot be determined" >&2 -+ { (exit 1); exit 1; }; } -+test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -+ { echo "$as_me: error: pwd does not report name of working directory" >&2 -+ { (exit 1); exit 1; }; } -+ -+ -+# Find the source files, if location was not specified. -+if test -z "$srcdir"; then -+ ac_srcdir_defaulted=yes -+ # Try the directory containing this script, then the parent directory. -+ ac_confdir=`$as_dirname -- "$0" || -+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$0" : 'X\(//\)[^/]' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$0" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ srcdir=$ac_confdir -+ if test ! -r "$srcdir/$ac_unique_file"; then -+ srcdir=.. -+ fi -+else -+ ac_srcdir_defaulted=no -+fi -+if test ! -r "$srcdir/$ac_unique_file"; then -+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -+ac_abs_confdir=`( -+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 -+ { (exit 1); exit 1; }; } -+ pwd)` -+# When building in place, set srcdir=. -+if test "$ac_abs_confdir" = "$ac_pwd"; then -+ srcdir=. -+fi -+# Remove unnecessary trailing slashes from srcdir. -+# Double slashes in file names in object file debugging info -+# mess up M-x gdb in Emacs. -+case $srcdir in -+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -+esac -+for ac_var in $ac_precious_vars; do -+ eval ac_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_env_${ac_var}_value=\$${ac_var} -+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_cv_env_${ac_var}_value=\$${ac_var} -+done -+ -+# -+# Report the --help message. -+# -+if test "$ac_init_help" = "long"; then -+ # Omit some internal or obsolete options to make the list less imposing. -+ # This message is too long to be a string in the A/UX 3.1 sh. -+ cat <<_ACEOF -+\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems. -+ -+Usage: $0 [OPTION]... [VAR=VALUE]... -+ -+To assign environment variables (e.g., CC, CFLAGS...), specify them as -+VAR=VALUE. See below for descriptions of some of the useful variables. -+ -+Defaults for the options are specified in brackets. -+ -+Configuration: -+ -h, --help display this help and exit -+ --help=short display options specific to this package -+ --help=recursive display the short help of all the included packages -+ -V, --version display version information and exit -+ -q, --quiet, --silent do not print \`checking...' messages -+ --cache-file=FILE cache test results in FILE [disabled] -+ -C, --config-cache alias for \`--cache-file=config.cache' -+ -n, --no-create do not create output files -+ --srcdir=DIR find the sources in DIR [configure dir or \`..'] -+ -+Installation directories: -+ --prefix=PREFIX install architecture-independent files in PREFIX -+ [$ac_default_prefix] -+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -+ [PREFIX] -+ -+By default, \`make install' will install all the files in -+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -+an installation prefix other than \`$ac_default_prefix' using \`--prefix', -+for instance \`--prefix=\$HOME'. -+ -+For better control, use the options below. -+ -+Fine tuning of the installation directories: -+ --bindir=DIR user executables [EPREFIX/bin] -+ --sbindir=DIR system admin executables [EPREFIX/sbin] -+ --libexecdir=DIR program executables [EPREFIX/libexec] -+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data [PREFIX/var] -+ --libdir=DIR object code libraries [EPREFIX/lib] -+ --includedir=DIR C header files [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc [/usr/include] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] -+_ACEOF -+ -+ cat <<\_ACEOF -+ -+Program names: -+ --program-prefix=PREFIX prepend PREFIX to installed program names -+ --program-suffix=SUFFIX append SUFFIX to installed program names -+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names -+ -+System types: -+ --build=BUILD configure for building on BUILD [guessed] -+ --host=HOST cross-compile to build programs to run on HOST [BUILD] -+ --target=TARGET configure for building compilers for TARGET [HOST] -+_ACEOF -+fi -+ -+if test -n "$ac_init_help"; then -+ case $ac_init_help in -+ short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";; -+ esac -+ cat <<\_ACEOF -+ -+Optional Features: -+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) -+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] -+ --enable-multilib build many library versions (default) -+ --enable-target-optspace optimize for space -+ --enable-malloc-debugging indicate malloc debugging requested -+ --enable-newlib-multithread enable support for multiple threads -+ --enable-newlib-iconv enable iconv library support -+ --enable-newlib-elix-level supply desired elix library level (1-4) -+ --disable-newlib-io-float disable printf/scanf family float support -+ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls -+ --enable-maintainer-mode enable make rules and dependencies not useful -+ (and sometimes confusing) to the casual installer -+ -+_ACEOF -+ac_status=$? -+fi -+ -+if test "$ac_init_help" = "recursive"; then -+ # If there are subdirs, report their specific --help. -+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -+ test -d "$ac_dir" || continue -+ ac_builddir=. -+ -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix -+ -+case $srcdir in -+ .) # We are building in place. -+ ac_srcdir=. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -+ -+ cd "$ac_dir" || { ac_status=$?; continue; } -+ # Check for guested configure. -+ if test -f "$ac_srcdir/configure.gnu"; then -+ echo && -+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive -+ elif test -f "$ac_srcdir/configure"; then -+ echo && -+ $SHELL "$ac_srcdir/configure" --help=recursive -+ else -+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -+ fi || ac_status=$? -+ cd "$ac_pwd" || { ac_status=$?; break; } -+ done -+fi -+ -+test -n "$ac_init_help" && exit $ac_status -+if $ac_init_version; then -+ cat <<\_ACEOF -+newlib configure NEWLIB_VERSION -+generated by GNU Autoconf 2.61 -+ -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+This configure script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it. -+_ACEOF -+ exit -+fi -+cat >config.log <<_ACEOF -+This file contains any messages produced by compilers while -+running configure, to aid debugging if configure makes a mistake. -+ -+It was created by newlib $as_me NEWLIB_VERSION, which was -+generated by GNU Autoconf 2.61. Invocation command line was -+ -+ $ $0 $@ -+ -+_ACEOF -+exec 5>>config.log -+{ -+cat <<_ASUNAME -+## --------- ## -+## Platform. ## -+## --------- ## -+ -+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -+uname -m = `(uname -m) 2>/dev/null || echo unknown` -+uname -r = `(uname -r) 2>/dev/null || echo unknown` -+uname -s = `(uname -s) 2>/dev/null || echo unknown` -+uname -v = `(uname -v) 2>/dev/null || echo unknown` -+ -+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` -+ -+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -+ -+_ASUNAME -+ -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ echo "PATH: $as_dir" -+done -+IFS=$as_save_IFS -+ -+} >&5 -+ -+cat >&5 <<_ACEOF -+ -+ -+## ----------- ## -+## Core tests. ## -+## ----------- ## -+ -+_ACEOF -+ -+ -+# Keep a trace of the command line. -+# Strip out --no-create and --no-recursion so they do not pile up. -+# Strip out --silent because we don't want to record it for future runs. -+# Also quote any args containing shell meta-characters. -+# Make two passes to allow for proper duplicate-argument suppression. -+ac_configure_args= -+ac_configure_args0= -+ac_configure_args1= -+ac_must_keep_next=false -+for ac_pass in 1 2 -+do -+ for ac_arg -+ do -+ case $ac_arg in -+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil) -+ continue ;; -+ *\'*) -+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ esac -+ case $ac_pass in -+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; -+ 2) -+ ac_configure_args1="$ac_configure_args1 '$ac_arg'" -+ if test $ac_must_keep_next = true; then -+ ac_must_keep_next=false # Got value, back to normal. -+ else -+ case $ac_arg in -+ *=* | --config-cache | -C | -disable-* | --disable-* \ -+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ -+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ -+ | -with-* | --with-* | -without-* | --without-* | --x) -+ case "$ac_configure_args0 " in -+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; -+ esac -+ ;; -+ -* ) ac_must_keep_next=true ;; -+ esac -+ fi -+ ac_configure_args="$ac_configure_args '$ac_arg'" -+ ;; -+ esac -+ done -+done -+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } -+ -+# When interrupted or exit'd, cleanup temporary files, and complete -+# config.log. We remove comments because anyway the quotes in there -+# would cause problems or look ugly. -+# WARNING: Use '\'' to represent an apostrophe within the trap. -+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -+trap 'exit_status=$? -+ # Save into config.log some information that might help in debugging. -+ { -+ echo -+ -+ cat <<\_ASBOX -+## ---------------- ## -+## Cache variables. ## -+## ---------------- ## -+_ASBOX -+ echo -+ # The following way of writing the cache mishandles newlines in values, -+( -+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ (set) 2>&1 | -+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) -+ sed -n \ -+ "s/'\''/'\''\\\\'\'''\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" -+ ;; #( -+ *) -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" -+ ;; -+ esac | -+ sort -+) -+ echo -+ -+ cat <<\_ASBOX -+## ----------------- ## -+## Output variables. ## -+## ----------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_vars -+ do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" -+ done | sort -+ echo -+ -+ if test -n "$ac_subst_files"; then -+ cat <<\_ASBOX -+## ------------------- ## -+## File substitutions. ## -+## ------------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_files -+ do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" -+ done | sort -+ echo -+ fi -+ -+ if test -s confdefs.h; then -+ cat <<\_ASBOX -+## ----------- ## -+## confdefs.h. ## -+## ----------- ## -+_ASBOX -+ echo -+ cat confdefs.h -+ echo -+ fi -+ test "$ac_signal" != 0 && -+ echo "$as_me: caught signal $ac_signal" -+ echo "$as_me: exit $exit_status" -+ } >&5 -+ rm -f core *.core core.conftest.* && -+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && -+ exit $exit_status -+' 0 -+for ac_signal in 1 2 13 15; do -+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -+done -+ac_signal=0 -+ -+# confdefs.h avoids OS command line length limits that DEFS can exceed. -+rm -f -r conftest* confdefs.h -+ -+# Predefined preprocessor variables. -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_NAME "$PACKAGE_NAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_VERSION "$PACKAGE_VERSION" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_STRING "$PACKAGE_STRING" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -+_ACEOF -+ -+ -+# Let the site file select an alternate cache file if it wants to. -+# Prefer explicitly selected file to automatically selected ones. -+if test -n "$CONFIG_SITE"; then -+ set x "$CONFIG_SITE" -+elif test "x$prefix" != xNONE; then -+ set x "$prefix/share/config.site" "$prefix/etc/config.site" -+else -+ set x "$ac_default_prefix/share/config.site" \ -+ "$ac_default_prefix/etc/config.site" -+fi -+shift -+for ac_site_file -+do -+ if test -r "$ac_site_file"; then -+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -+echo "$as_me: loading site script $ac_site_file" >&6;} -+ sed 's/^/| /' "$ac_site_file" >&5 -+ . "$ac_site_file" -+ fi -+done -+ -+if test -r "$cache_file"; then -+ # Some versions of bash will fail to source /dev/null (special -+ # files actually), so we avoid doing that. -+ if test -f "$cache_file"; then -+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -+echo "$as_me: loading cache $cache_file" >&6;} -+ case $cache_file in -+ [\\/]* | ?:[\\/]* ) . "$cache_file";; -+ *) . "./$cache_file";; -+ esac -+ fi -+else -+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -+echo "$as_me: creating cache $cache_file" >&6;} -+ >$cache_file -+fi -+ -+# Check that the precious variables saved in the cache have kept the same -+# value. -+ac_cache_corrupted=false -+for ac_var in $ac_precious_vars; do -+ eval ac_old_set=\$ac_cv_env_${ac_var}_set -+ eval ac_new_set=\$ac_env_${ac_var}_set -+ eval ac_old_val=\$ac_cv_env_${ac_var}_value -+ eval ac_new_val=\$ac_env_${ac_var}_value -+ case $ac_old_set,$ac_new_set in -+ set,) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,set) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,);; -+ *) -+ if test "x$ac_old_val" != "x$ac_new_val"; then -+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -+echo "$as_me: former value: $ac_old_val" >&2;} -+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -+echo "$as_me: current value: $ac_new_val" >&2;} -+ ac_cache_corrupted=: -+ fi;; -+ esac -+ # Pass precious variables to config.status. -+ if test "$ac_new_set" = set; then -+ case $ac_new_val in -+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *) ac_arg=$ac_var=$ac_new_val ;; -+ esac -+ case " $ac_configure_args " in -+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. -+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; -+ esac -+ fi -+done -+if $ac_cache_corrupted; then -+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -+echo "$as_me: error: changes in the environment can compromise the build" >&2;} -+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+ -+ -+ac_aux_dir= -+for ac_dir in ../../../.. "$srcdir"/../../../..; do -+ if test -f "$ac_dir/install-sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install-sh -c" -+ break -+ elif test -f "$ac_dir/install.sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install.sh -c" -+ break -+ elif test -f "$ac_dir/shtool"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/shtool install -c" -+ break -+ fi -+done -+if test -z "$ac_aux_dir"; then -+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5 -+echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+# These three variables are undocumented and unsupported, -+# and are intended to be withdrawn in a future Autoconf release. -+# They can cause serious problems if a builder's source tree is in a directory -+# whose full name contains unusual characters. -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -+ -+ -+ -+# Make sure we can run config.sub. -+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} -+ { (exit 1); exit 1; }; } -+ -+{ echo "$as_me:$LINENO: checking build system type" >&5 -+echo $ECHO_N "checking build system type... $ECHO_C" >&6; } -+if test "${ac_cv_build+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_build_alias=$build_alias -+test "x$ac_build_alias" = x && -+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -+test "x$ac_build_alias" = x && -+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -+echo "$as_me: error: cannot guess build type; you must specify one" >&2;} -+ { (exit 1); exit 1; }; } -+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -+echo "${ECHO_T}$ac_cv_build" >&6; } -+case $ac_cv_build in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -+echo "$as_me: error: invalid value of canonical build" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+build=$ac_cv_build -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_build -+shift -+build_cpu=$1 -+build_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+build_os=$* -+IFS=$ac_save_IFS -+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -+ -+ -+{ echo "$as_me:$LINENO: checking host system type" >&5 -+echo $ECHO_N "checking host system type... $ECHO_C" >&6; } -+if test "${ac_cv_host+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test "x$host_alias" = x; then -+ ac_cv_host=$ac_cv_build -+else -+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -+echo "${ECHO_T}$ac_cv_host" >&6; } -+case $ac_cv_host in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -+echo "$as_me: error: invalid value of canonical host" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+host=$ac_cv_host -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_host -+shift -+host_cpu=$1 -+host_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+host_os=$* -+IFS=$ac_save_IFS -+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -+ -+ -+am__api_version="1.4" -+# Find a good install program. We prefer a C program (faster), -+# so one script is as good as another. But avoid the broken or -+# incompatible versions: -+# SysV /etc/install, /usr/sbin/install -+# SunOS /usr/etc/install -+# IRIX /sbin/install -+# AIX /bin/install -+# AmigaOS /C/install, which installs bootblocks on floppy discs -+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -+# AFS /usr/afsws/bin/install, which mishandles nonexistent args -+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -+# OS/2's system install, which has a completely different semantic -+# ./install, which can be erroneously created by make from ./install.sh. -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -+if test -z "$INSTALL"; then -+if test "${ac_cv_path_install+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in -+ ./ | .// | /cC/* | \ -+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ /usr/ucb/* ) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then -+ if test $ac_prog = install && -+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # AIX install. It has an incompatible calling convention. -+ : -+ elif test $ac_prog = install && -+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # program-specific install script used by HP pwplus--don't use. -+ : -+ else -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi -+ fi -+ done -+ done -+ ;; -+esac -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ if test "${ac_cv_path_install+set}" = set; then -+ INSTALL=$ac_cv_path_install -+ else -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will -+ # break other packages using the cache if that directory is -+ # removed, or if the value is a relative name. -+ INSTALL=$ac_install_sh -+ fi -+fi -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } -+ -+# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -+# It thinks the first close brace ends the variable substitution. -+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -+ -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' -+ -+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -+ -+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } -+# Just in case -+sleep 1 -+echo timestamp > conftestfile -+# Do `set' in a subshell so we don't clobber the current shell's -+# arguments. Must try -L first in case configure is actually a -+# symlink; some systems play weird games with the mod time of symlinks -+# (eg FreeBSD returns the mod time of the symlink's containing -+# directory). -+if ( -+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` -+ if test "$*" = "X"; then -+ # -L didn't work. -+ set X `ls -t $srcdir/configure conftestfile` -+ fi -+ if test "$*" != "X $srcdir/configure conftestfile" \ -+ && test "$*" != "X conftestfile $srcdir/configure"; then -+ -+ # If neither matched, then we have a broken ls. This can happen -+ # if, for instance, CONFIG_SHELL is bash and it inherits a -+ # broken ls alias from the environment. This has actually -+ # happened. Such a system could not be considered "sane". -+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -+alias in your environment" >&5 -+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -+alias in your environment" >&2;} -+ { (exit 1); exit 1; }; } -+ fi -+ -+ test "$2" = conftestfile -+ ) -+then -+ # Ok. -+ : -+else -+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -+Check your system clock" >&5 -+echo "$as_me: error: newly created file is older than distributed files! -+Check your system clock" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+rm -f conftest* -+{ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } -+test "$program_prefix" != NONE && -+ program_transform_name="s&^&$program_prefix&;$program_transform_name" -+# Use a double $ so make ignores it. -+test "$program_suffix" != NONE && -+ program_transform_name="s&\$&$program_suffix&;$program_transform_name" -+# Double any \ or $. echo might interpret backslashes. -+# By default was `s,x,x', remove it if useless. -+cat <<\_ACEOF >conftest.sed -+s/[\\$]/&&/g;s/;s,x,x,$// -+_ACEOF -+program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -+rm -f conftest.sed -+ -+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ cat >conftest.make <<\_ACEOF -+SHELL = /bin/sh -+all: -+ @echo '@@@%%%=$(MAKE)=@@@%%%' -+_ACEOF -+# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -+case `${MAKE-make} -f conftest.make 2>/dev/null` in -+ *@@@%%%=?*=@@@%%%*) -+ eval ac_cv_prog_make_${ac_make}_set=yes;; -+ *) -+ eval ac_cv_prog_make_${ac_make}_set=no;; -+esac -+rm -f conftest.make -+fi -+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } -+ SET_MAKE= -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+ SET_MAKE="MAKE=${MAKE-make}" -+fi -+ -+ -+# Check whether --enable-multilib was given. -+if test "${enable_multilib+set}" = set; then -+ enableval=$enable_multilib; case "${enableval}" in -+ yes) multilib=yes ;; -+ no) multilib=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 -+echo "$as_me: error: bad value ${enableval} for multilib option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ multilib=yes -+fi -+ -+# Check whether --enable-target-optspace was given. -+if test "${enable_target_optspace+set}" = set; then -+ enableval=$enable_target_optspace; case "${enableval}" in -+ yes) target_optspace=yes ;; -+ no) target_optspace=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 -+echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ target_optspace= -+fi -+ -+# Check whether --enable-malloc-debugging was given. -+if test "${enable_malloc_debugging+set}" = set; then -+ enableval=$enable_malloc_debugging; case "${enableval}" in -+ yes) malloc_debugging=yes ;; -+ no) malloc_debugging=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 -+echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ malloc_debugging= -+fi -+ -+# Check whether --enable-newlib-multithread was given. -+if test "${enable_newlib_multithread+set}" = set; then -+ enableval=$enable_newlib_multithread; case "${enableval}" in -+ yes) newlib_multithread=yes ;; -+ no) newlib_multithread=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_multithread=yes -+fi -+ -+# Check whether --enable-newlib-iconv was given. -+if test "${enable_newlib_iconv+set}" = set; then -+ enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then -+ case "${enableval}" in -+ yes) newlib_iconv=yes ;; -+ no) newlib_iconv=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+ fi -+else -+ newlib_iconv=${newlib_iconv} -+fi -+ -+# Check whether --enable-newlib-elix-level was given. -+if test "${enable_newlib_elix_level+set}" = set; then -+ enableval=$enable_newlib_elix_level; case "${enableval}" in -+ 0) newlib_elix_level=0 ;; -+ 1) newlib_elix_level=1 ;; -+ 2) newlib_elix_level=2 ;; -+ 3) newlib_elix_level=3 ;; -+ 4) newlib_elix_level=4 ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_elix_level=0 -+fi -+ -+# Check whether --enable-newlib-io-float was given. -+if test "${enable_newlib_io_float+set}" = set; then -+ enableval=$enable_newlib_io_float; case "${enableval}" in -+ yes) newlib_io_float=yes ;; -+ no) newlib_io_float=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_io_float=yes -+fi -+ -+# Check whether --enable-newlib-supplied-syscalls was given. -+if test "${enable_newlib_supplied_syscalls+set}" = set; then -+ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in -+ yes) newlib_may_supply_syscalls=yes ;; -+ no) newlib_may_supply_syscalls=no ;; -+ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 -+echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;} -+ { (exit 1); exit 1; }; } ;; -+ esac -+else -+ newlib_may_supply_syscalls=yes -+fi -+ -+ -+ -+if test x${newlib_may_supply_syscalls} = xyes; then -+ MAY_SUPPLY_SYSCALLS_TRUE= -+ MAY_SUPPLY_SYSCALLS_FALSE='#' -+else -+ MAY_SUPPLY_SYSCALLS_TRUE='#' -+ MAY_SUPPLY_SYSCALLS_FALSE= -+fi -+ -+ -+test -z "${with_target_subdir}" && with_target_subdir=. -+ -+if test "${srcdir}" = "."; then -+ if test "${with_target_subdir}" != "."; then -+ newlib_basedir="${srcdir}/${with_multisrctop}../../../.." -+ else -+ newlib_basedir="${srcdir}/${with_multisrctop}../../.." -+ fi -+else -+ newlib_basedir="${srcdir}/../../.." -+fi -+ -+ -+{ echo "$as_me:$LINENO: checking target system type" >&5 -+echo $ECHO_N "checking target system type... $ECHO_C" >&6; } -+if test "${ac_cv_target+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test "x$target_alias" = x; then -+ ac_cv_target=$ac_cv_host -+else -+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 -+echo "${ECHO_T}$ac_cv_target" >&6; } -+case $ac_cv_target in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 -+echo "$as_me: error: invalid value of canonical target" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+target=$ac_cv_target -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_target -+shift -+target_cpu=$1 -+target_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+target_os=$* -+IFS=$ac_save_IFS -+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac -+ -+ -+# The aliases save the names the user supplied, while $host etc. -+# will get canonicalized. -+test -n "$target_alias" && -+ test "$program_prefix$program_suffix$program_transform_name" = \ -+ NONENONEs,x,x, && -+ program_prefix=${target_alias}- -+ -+ -+PACKAGE=newlib -+ -+VERSION=1.14.0.atmel.1.0.1 -+ -+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then -+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE "$PACKAGE" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define VERSION "$VERSION" -+_ACEOF -+ -+ -+ -+missing_dir=`cd $ac_aux_dir && pwd` -+{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 -+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then -+ ACLOCAL=aclocal-${am__api_version} -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working autoconf" >&5 -+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (autoconf --version) < /dev/null > /dev/null 2>&1; then -+ AUTOCONF=autoconf -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ AUTOCONF="$missing_dir/missing autoconf" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 -+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then -+ AUTOMAKE=automake-${am__api_version} -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ AUTOMAKE="$missing_dir/missing automake-${am__api_version}" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working autoheader" >&5 -+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (autoheader --version) < /dev/null > /dev/null 2>&1; then -+ AUTOHEADER=autoheader -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ AUTOHEADER="$missing_dir/missing autoheader" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+{ echo "$as_me:$LINENO: checking for working makeinfo" >&5 -+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; } -+# Run test in a subshell; some versions of sh will print an error if -+# an executable is not found, even if stderr is redirected. -+# Redirect stdin to placate older versions of autoconf. Sigh. -+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then -+ MAKEINFO=makeinfo -+ { echo "$as_me:$LINENO: result: found" >&5 -+echo "${ECHO_T}found" >&6; } -+else -+ MAKEINFO="$missing_dir/missing makeinfo" -+ { echo "$as_me:$LINENO: result: missing" >&5 -+echo "${ECHO_T}missing" >&6; } -+fi -+ -+ -+ -+# FIXME: We temporarily define our own version of AC_PROG_CC. This is -+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -+# are probably using a cross compiler, which will not be able to fully -+# link an executable. This should really be fixed in autoconf -+# itself. -+ -+ -+ -+# Extract the first word of "gcc", so it can be a program name with args. -+set dummy gcc; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_CC="gcc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+CC=$ac_cv_prog_CC -+if test -n "$CC"; then -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+if test -z "$CC"; then -+ # Extract the first word of "cc", so it can be a program name with args. -+set dummy cc; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. -+else -+ ac_prog_rejected=no -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -+ ac_prog_rejected=yes -+ continue -+ fi -+ ac_cv_prog_CC="cc" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+if test $ac_prog_rejected = yes; then -+ # We found a bogon in the path, so make sure we never use it. -+ set dummy $ac_cv_prog_CC -+ shift -+ if test $# != 0; then -+ # We chose a different compiler from the bogus one. -+ # However, it has the same basename, so the bogon will be chosen -+ # first if we set CC to just the basename; use the full file name. -+ shift -+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" -+ fi -+fi -+fi -+fi -+CC=$ac_cv_prog_CC -+if test -n "$CC"; then -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+ test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 -+echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+#AC_PROG_CC_GNU -+ -+if test $ac_cv_c_compiler_gnu = yes; then -+ GCC=yes -+ ac_test_CFLAGS="${CFLAGS+set}" -+ ac_save_CFLAGS="$CFLAGS" -+ CFLAGS= -+# AC_PROG_CC_G -+ if test "$ac_test_CFLAGS" = set; then -+ CFLAGS="$ac_save_CFLAGS" -+ elif test $ac_cv_prog_cc_g = yes; then -+ CFLAGS="-g -O2" -+ else -+ CFLAGS="-O2" -+ fi -+else -+ GCC= -+ test "${CFLAGS+set}" = set || CFLAGS="-g" -+fi -+ -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -+set dummy ${ac_tool_prefix}as; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_AS+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$AS"; then -+ ac_cv_prog_AS="$AS" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_AS="${ac_tool_prefix}as" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+AS=$ac_cv_prog_AS -+if test -n "$AS"; then -+ { echo "$as_me:$LINENO: result: $AS" >&5 -+echo "${ECHO_T}$AS" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_AS"; then -+ ac_ct_AS=$AS -+ # Extract the first word of "as", so it can be a program name with args. -+set dummy as; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_AS"; then -+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_AS="as" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_AS=$ac_cv_prog_ac_ct_AS -+if test -n "$ac_ct_AS"; then -+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -+echo "${ECHO_T}$ac_ct_AS" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ if test "x$ac_ct_AS" = x; then -+ AS="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AS=$ac_ct_AS -+ fi -+else -+ AS="$ac_cv_prog_AS" -+fi -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -+set dummy ${ac_tool_prefix}ar; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_AR+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$AR"; then -+ ac_cv_prog_AR="$AR" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_AR="${ac_tool_prefix}ar" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+AR=$ac_cv_prog_AR -+if test -n "$AR"; then -+ { echo "$as_me:$LINENO: result: $AR" >&5 -+echo "${ECHO_T}$AR" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_AR"; then -+ ac_ct_AR=$AR -+ # Extract the first word of "ar", so it can be a program name with args. -+set dummy ar; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_AR"; then -+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_AR="ar" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_AR=$ac_cv_prog_ac_ct_AR -+if test -n "$ac_ct_AR"; then -+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -+echo "${ECHO_T}$ac_ct_AR" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ if test "x$ac_ct_AR" = x; then -+ AR="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AR=$ac_ct_AR -+ fi -+else -+ AR="$ac_cv_prog_AR" -+fi -+ -+if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -+set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_RANLIB+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$RANLIB"; then -+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+RANLIB=$ac_cv_prog_RANLIB -+if test -n "$RANLIB"; then -+ { echo "$as_me:$LINENO: result: $RANLIB" >&5 -+echo "${ECHO_T}$RANLIB" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ -+fi -+if test -z "$ac_cv_prog_RANLIB"; then -+ ac_ct_RANLIB=$RANLIB -+ # Extract the first word of "ranlib", so it can be a program name with args. -+set dummy ranlib; ac_word=$2 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test -n "$ac_ct_RANLIB"; then -+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -+else -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ ac_cv_prog_ac_ct_RANLIB="ranlib" -+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -+ break 2 -+ fi -+done -+done -+IFS=$as_save_IFS -+ -+fi -+fi -+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -+if test -n "$ac_ct_RANLIB"; then -+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -+echo "${ECHO_T}$ac_ct_RANLIB" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } -+fi -+ -+ if test "x$ac_ct_RANLIB" = x; then -+ RANLIB=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ RANLIB=$ac_ct_RANLIB -+ fi -+else -+ RANLIB="$ac_cv_prog_RANLIB" -+fi -+ -+ -+# Find a good install program. We prefer a C program (faster), -+# so one script is as good as another. But avoid the broken or -+# incompatible versions: -+# SysV /etc/install, /usr/sbin/install -+# SunOS /usr/etc/install -+# IRIX /sbin/install -+# AIX /bin/install -+# AmigaOS /C/install, which installs bootblocks on floppy discs -+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -+# AFS /usr/afsws/bin/install, which mishandles nonexistent args -+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -+# OS/2's system install, which has a completely different semantic -+# ./install, which can be erroneously created by make from ./install.sh. -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -+if test -z "$INSTALL"; then -+if test "${ac_cv_path_install+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in -+ ./ | .// | /cC/* | \ -+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ /usr/ucb/* ) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then -+ if test $ac_prog = install && -+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # AIX install. It has an incompatible calling convention. -+ : -+ elif test $ac_prog = install && -+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # program-specific install script used by HP pwplus--don't use. -+ : -+ else -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi -+ fi -+ done -+ done -+ ;; -+esac -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ if test "${ac_cv_path_install+set}" = set; then -+ INSTALL=$ac_cv_path_install -+ else -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will -+ # break other packages using the cache if that directory is -+ # removed, or if the value is a relative name. -+ INSTALL=$ac_install_sh -+ fi -+fi -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } -+ -+# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -+# It thinks the first close brace ends the variable substitution. -+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -+ -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' -+ -+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -+ -+ -+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } -+ # Check whether --enable-maintainer-mode was given. -+if test "${enable_maintainer_mode+set}" = set; then -+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -+else -+ USE_MAINTAINER_MODE=no -+fi -+ -+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } -+ -+ -+if test $USE_MAINTAINER_MODE = yes; then -+ MAINTAINER_MODE_TRUE= -+ MAINTAINER_MODE_FALSE='#' -+else -+ MAINTAINER_MODE_TRUE='#' -+ MAINTAINER_MODE_FALSE= -+fi -+ MAINT=$MAINTAINER_MODE_TRUE -+ -+ -+ -+# We need AC_EXEEXT to keep automake happy in cygnus mode. However, -+# at least currently, we never actually build a program, so we never -+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally -+# fails, because we are probably configuring with a cross compiler -+# which can't create executables. So we include AC_EXEEXT to keep -+# automake happy, but we don't execute it, since we don't care about -+# the result. -+#if false; then -+# -+#fi -+ -+. ${newlib_basedir}/configure.host -+ -+newlib_cflags="${newlib_cflags} -fno-builtin" -+ -+NEWLIB_CFLAGS=${newlib_cflags} -+ -+ -+LDFLAGS=${ldflags} -+ -+ -+ -+ -+if test x${newlib_elix_level} = x0; then -+ ELIX_LEVEL_0_TRUE= -+ ELIX_LEVEL_0_FALSE='#' -+else -+ ELIX_LEVEL_0_TRUE='#' -+ ELIX_LEVEL_0_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x1; then -+ ELIX_LEVEL_1_TRUE= -+ ELIX_LEVEL_1_FALSE='#' -+else -+ ELIX_LEVEL_1_TRUE='#' -+ ELIX_LEVEL_1_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x2; then -+ ELIX_LEVEL_2_TRUE= -+ ELIX_LEVEL_2_FALSE='#' -+else -+ ELIX_LEVEL_2_TRUE='#' -+ ELIX_LEVEL_2_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x3; then -+ ELIX_LEVEL_3_TRUE= -+ ELIX_LEVEL_3_FALSE='#' -+else -+ ELIX_LEVEL_3_TRUE='#' -+ ELIX_LEVEL_3_FALSE= -+fi -+ -+ -+if test x${newlib_elix_level} = x4; then -+ ELIX_LEVEL_4_TRUE= -+ ELIX_LEVEL_4_FALSE='#' -+else -+ ELIX_LEVEL_4_TRUE='#' -+ ELIX_LEVEL_4_FALSE= -+fi -+ -+ -+ -+if test x${use_libtool} = xyes; then -+ USE_LIBTOOL_TRUE= -+ USE_LIBTOOL_FALSE='#' -+else -+ USE_LIBTOOL_TRUE='#' -+ USE_LIBTOOL_FALSE= -+fi -+ -+# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we -+# use oext, which is set in configure.host based on the target platform. -+OBJEXT=${oext} -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ac_config_files="$ac_config_files Makefile" -+ -+cat >confcache <<\_ACEOF -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs, see configure's option --config-cache. -+# It is not useful on other systems. If it contains results you don't -+# want to keep, you may remove or edit it. -+# -+# config.status only pays attention to the cache file if you give it -+# the --recheck option to rerun configure. -+# -+# `ac_cv_env_foo' variables (set or unset) will be overridden when -+# loading this file, other *unset* `ac_cv_foo' will be assigned the -+# following values. -+ -+_ACEOF -+ -+# The following way of writing the cache mishandles newlines in values, -+# but we know of no workaround that is simple, portable, and efficient. -+# So, we kill variables containing newlines. -+# Ultrix sh set writes to stderr and can't be redirected directly, -+# and sets the high bit in the cache file unless we assign to the vars. -+( -+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ -+ (set) 2>&1 | -+ case $as_nl`(ac_space=' '; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) -+ # `set' does not quote correctly, so add quotes (double-quote -+ # substitution turns \\\\ into \\, and sed turns \\ into \). -+ sed -n \ -+ "s/'/'\\\\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -+ ;; #( -+ *) -+ # `set' quotes correctly as required by POSIX, so do not add quotes. -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" -+ ;; -+ esac | -+ sort -+) | -+ sed ' -+ /^ac_cv_env_/b end -+ t clear -+ :clear -+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ -+ t end -+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -+ :end' >>confcache -+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else -+ if test -w "$cache_file"; then -+ test "x$cache_file" != "x/dev/null" && -+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -+echo "$as_me: updating cache $cache_file" >&6;} -+ cat confcache >$cache_file -+ else -+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -+echo "$as_me: not updating unwritable cache $cache_file" >&6;} -+ fi -+fi -+rm -f confcache -+ -+test "x$prefix" = xNONE && prefix=$ac_default_prefix -+# Let make expand exec_prefix. -+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -+ -+# Transform confdefs.h into DEFS. -+# Protect against shell expansion while executing Makefile rules. -+# Protect against Makefile macro expansion. -+# -+# If the first sed substitution is executed (which looks for macros that -+# take arguments), then branch to the quote section. Otherwise, -+# look for a macro that doesn't take arguments. -+ac_script=' -+t clear -+:clear -+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g -+t quote -+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g -+t quote -+b any -+:quote -+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -+s/\[/\\&/g -+s/\]/\\&/g -+s/\$/$$/g -+H -+:any -+${ -+ g -+ s/^\n// -+ s/\n/ /g -+ p -+} -+' -+DEFS=`sed -n "$ac_script" confdefs.h` -+ -+ -+ac_libobjs= -+ac_ltlibobjs= -+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue -+ # 1. Remove the extension, and $U if already installed. -+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -+ ac_i=`echo "$ac_i" | sed "$ac_script"` -+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR -+ # will be set to the directory where LIBOBJS objects are built. -+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" -+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -+done -+LIBOBJS=$ac_libobjs -+ -+LTLIBOBJS=$ac_ltlibobjs -+ -+ -+ -+: ${CONFIG_STATUS=./config.status} -+ac_clean_files_save=$ac_clean_files -+ac_clean_files="$ac_clean_files $CONFIG_STATUS" -+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -+echo "$as_me: creating $CONFIG_STATUS" >&6;} -+cat >$CONFIG_STATUS <<_ACEOF -+#! $SHELL -+# Generated by $as_me. -+# Run this file to recreate the current configuration. -+# Compiler output produced by configure, useful for debugging -+# configure, is in config.log if it exists. -+ -+debug=false -+ac_cs_recheck=false -+ac_cs_silent=false -+SHELL=\${CONFIG_SHELL-$SHELL} -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename -- "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | -+ sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno -+ N -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -+ t loop -+ s/-\n.*// -+ ' >$as_me.lineno && -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+exec 6>&1 -+ -+# Save the log message, to keep $[0] and so on meaningful, and to -+# report actual input values of CONFIG_FILES etc. instead of their -+# values after options handling. -+ac_log=" -+This file was extended by newlib $as_me NEWLIB_VERSION, which was -+generated by GNU Autoconf 2.61. Invocation command line was -+ -+ CONFIG_FILES = $CONFIG_FILES -+ CONFIG_HEADERS = $CONFIG_HEADERS -+ CONFIG_LINKS = $CONFIG_LINKS -+ CONFIG_COMMANDS = $CONFIG_COMMANDS -+ $ $0 $@ -+ -+on `(hostname || uname -n) 2>/dev/null | sed 1q` -+" -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+# Files that config.status was made for. -+config_files="$ac_config_files" -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ac_cs_usage="\ -+\`$as_me' instantiates files from templates according to the -+current configuration. -+ -+Usage: $0 [OPTIONS] [FILE]... -+ -+ -h, --help print this help, then exit -+ -V, --version print version number and configuration settings, then exit -+ -q, --quiet do not print progress messages -+ -d, --debug don't remove temporary files -+ --recheck update $as_me by reconfiguring in the same conditions -+ --file=FILE[:TEMPLATE] -+ instantiate the configuration file FILE -+ -+Configuration files: -+$config_files -+ -+Report bugs to <bug-autoconf@gnu.org>." -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ac_cs_version="\\ -+newlib config.status NEWLIB_VERSION -+configured by $0, generated by GNU Autoconf 2.61, -+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -+ -+Copyright (C) 2006 Free Software Foundation, Inc. -+This config.status script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it." -+ -+ac_pwd='$ac_pwd' -+srcdir='$srcdir' -+INSTALL='$INSTALL' -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If no file are specified by the user, then we need to provide default -+# value. By we need to know if files were specified by the user. -+ac_need_defaults=: -+while test $# != 0 -+do -+ case $1 in -+ --*=*) -+ ac_option=`expr "X$1" : 'X\([^=]*\)='` -+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` -+ ac_shift=: -+ ;; -+ *) -+ ac_option=$1 -+ ac_optarg=$2 -+ ac_shift=shift -+ ;; -+ esac -+ -+ case $ac_option in -+ # Handling of the options. -+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) -+ ac_cs_recheck=: ;; -+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) -+ echo "$ac_cs_version"; exit ;; -+ --debug | --debu | --deb | --de | --d | -d ) -+ debug=: ;; -+ --file | --fil | --fi | --f ) -+ $ac_shift -+ CONFIG_FILES="$CONFIG_FILES $ac_optarg" -+ ac_need_defaults=false;; -+ --he | --h | --help | --hel | -h ) -+ echo "$ac_cs_usage"; exit ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil | --si | --s) -+ ac_cs_silent=: ;; -+ -+ # This is an error. -+ -*) { echo "$as_me: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } ;; -+ -+ *) ac_config_targets="$ac_config_targets $1" -+ ac_need_defaults=false ;; -+ -+ esac -+ shift -+done -+ -+ac_configure_extra_args= -+ -+if $ac_cs_silent; then -+ exec 6>/dev/null -+ ac_configure_extra_args="$ac_configure_extra_args --silent" -+fi -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+if \$ac_cs_recheck; then -+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -+ CONFIG_SHELL=$SHELL -+ export CONFIG_SHELL -+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+fi -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+exec 5>>config.log -+{ -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+ echo "$ac_log" -+} >&5 -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ -+# Handling of arguments. -+for ac_config_target in $ac_config_targets -+do -+ case $ac_config_target in -+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ -+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -+echo "$as_me: error: invalid argument: $ac_config_target" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+done -+ -+ -+# If the user did not use the arguments to specify the items to instantiate, -+# then the envvar interface is used. Set only those that are not. -+# We use the long form for the default assignment because of an extremely -+# bizarre bug on SunOS 4.1.3. -+if $ac_need_defaults; then -+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -+fi -+ -+# Have a temporary directory for convenience. Make it in the build tree -+# simply because there is no reason against having it here, and in addition, -+# creating and moving files from /tmp can sometimes cause problems. -+# Hook for its removal unless debugging. -+# Note that there is a small window in which the directory will not be cleaned: -+# after its creation but before its name has been assigned to `$tmp'. -+$debug || -+{ -+ tmp= -+ trap 'exit_status=$? -+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+' 0 -+ trap '{ (exit 1); exit 1; }' 1 2 13 15 -+} -+# Create a (secure) tmp directory for tmp files. -+ -+{ -+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && -+ test -n "$tmp" && test -d "$tmp" -+} || -+{ -+ tmp=./conf$$-$RANDOM -+ (umask 077 && mkdir "$tmp") -+} || -+{ -+ echo "$me: cannot create a temporary directory in ." >&2 -+ { (exit 1); exit 1; } -+} -+ -+# -+# Set up the sed scripts for CONFIG_FILES section. -+# -+ -+# No need to generate the scripts if there are no CONFIG_FILES. -+# This happens for instance when ./config.status config.h -+if test -n "$CONFIG_FILES"; then -+ -+_ACEOF -+ -+ -+ -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ cat >conf$$subs.sed <<_ACEOF -+SHELL!$SHELL$ac_delim -+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -+PACKAGE_NAME!$PACKAGE_NAME$ac_delim -+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -+PACKAGE_STRING!$PACKAGE_STRING$ac_delim -+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -+exec_prefix!$exec_prefix$ac_delim -+prefix!$prefix$ac_delim -+program_transform_name!$program_transform_name$ac_delim -+bindir!$bindir$ac_delim -+sbindir!$sbindir$ac_delim -+libexecdir!$libexecdir$ac_delim -+datarootdir!$datarootdir$ac_delim -+datadir!$datadir$ac_delim -+sysconfdir!$sysconfdir$ac_delim -+sharedstatedir!$sharedstatedir$ac_delim -+localstatedir!$localstatedir$ac_delim -+includedir!$includedir$ac_delim -+oldincludedir!$oldincludedir$ac_delim -+docdir!$docdir$ac_delim -+infodir!$infodir$ac_delim -+htmldir!$htmldir$ac_delim -+dvidir!$dvidir$ac_delim -+pdfdir!$pdfdir$ac_delim -+psdir!$psdir$ac_delim -+libdir!$libdir$ac_delim -+localedir!$localedir$ac_delim -+mandir!$mandir$ac_delim -+DEFS!$DEFS$ac_delim -+ECHO_C!$ECHO_C$ac_delim -+ECHO_N!$ECHO_N$ac_delim -+ECHO_T!$ECHO_T$ac_delim -+LIBS!$LIBS$ac_delim -+build_alias!$build_alias$ac_delim -+host_alias!$host_alias$ac_delim -+target_alias!$target_alias$ac_delim -+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim -+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim -+newlib_basedir!$newlib_basedir$ac_delim -+build!$build$ac_delim -+build_cpu!$build_cpu$ac_delim -+build_vendor!$build_vendor$ac_delim -+build_os!$build_os$ac_delim -+host!$host$ac_delim -+host_cpu!$host_cpu$ac_delim -+host_vendor!$host_vendor$ac_delim -+host_os!$host_os$ac_delim -+target!$target$ac_delim -+target_cpu!$target_cpu$ac_delim -+target_vendor!$target_vendor$ac_delim -+target_os!$target_os$ac_delim -+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -+INSTALL_DATA!$INSTALL_DATA$ac_delim -+PACKAGE!$PACKAGE$ac_delim -+VERSION!$VERSION$ac_delim -+ACLOCAL!$ACLOCAL$ac_delim -+AUTOCONF!$AUTOCONF$ac_delim -+AUTOMAKE!$AUTOMAKE$ac_delim -+AUTOHEADER!$AUTOHEADER$ac_delim -+MAKEINFO!$MAKEINFO$ac_delim -+SET_MAKE!$SET_MAKE$ac_delim -+CC!$CC$ac_delim -+AS!$AS$ac_delim -+AR!$AR$ac_delim -+RANLIB!$RANLIB$ac_delim -+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim -+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim -+MAINT!$MAINT$ac_delim -+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim -+LDFLAGS!$LDFLAGS$ac_delim -+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim -+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim -+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim -+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim -+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim -+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim -+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim -+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim -+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim -+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim -+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim -+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim -+OBJEXT!$OBJEXT$ac_delim -+oext!$oext$ac_delim -+aext!$aext$ac_delim -+libm_machine_dir!$libm_machine_dir$ac_delim -+machine_dir!$machine_dir$ac_delim -+sys_dir!$sys_dir$ac_delim -+LIBOBJS!$LIBOBJS$ac_delim -+LTLIBOBJS!$LTLIBOBJS$ac_delim -+_ACEOF -+ -+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then -+ break -+ elif $ac_last_try; then -+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " -+ fi -+done -+ -+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -+if test -n "$ac_eof"; then -+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` -+ ac_eof=`expr $ac_eof + 1` -+fi -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -+_ACEOF -+sed ' -+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -+s/^/s,@/; s/!/@,|#_!!_#|/ -+:n -+t n -+s/'"$ac_delim"'$/,g/; t -+s/$/\\/; p -+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -+' >>$CONFIG_STATUS <conf$$subs.sed -+rm -f conf$$subs.sed -+cat >>$CONFIG_STATUS <<_ACEOF -+:end -+s/|#_!!_#|//g -+CEOF$ac_eof -+_ACEOF -+ -+ -+# VPATH may cause trouble with some makes, so we remove $(srcdir), -+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). -+if test "x$srcdir" = x.; then -+ ac_vpsub='/^[ ]*VPATH[ ]*=/{ -+s/:*\$(srcdir):*/:/ -+s/:*\${srcdir}:*/:/ -+s/:*@srcdir@:*/:/ -+s/^\([^=]*=[ ]*\):*/\1/ -+s/:*$// -+s/^[^=]*=[ ]*$// -+}' -+fi -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+fi # test -n "$CONFIG_FILES" -+ -+ -+for ac_tag in :F $CONFIG_FILES -+do -+ case $ac_tag in -+ :[FHLC]) ac_mode=$ac_tag; continue;; -+ esac -+ case $ac_mode$ac_tag in -+ :[FHL]*:*);; -+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -+echo "$as_me: error: Invalid tag $ac_tag." >&2;} -+ { (exit 1); exit 1; }; };; -+ :[FH]-) ac_tag=-:-;; -+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; -+ esac -+ ac_save_IFS=$IFS -+ IFS=: -+ set x $ac_tag -+ IFS=$ac_save_IFS -+ shift -+ ac_file=$1 -+ shift -+ -+ case $ac_mode in -+ :L) ac_source=$1;; -+ :[FH]) -+ ac_file_inputs= -+ for ac_f -+ do -+ case $ac_f in -+ -) ac_f="$tmp/stdin";; -+ *) # Look for the file first in the build tree, then in the source tree -+ # (if the path is not absolute). The absolute path cannot be DOS-style, -+ # because $ac_f cannot contain `:'. -+ test -f "$ac_f" || -+ case $ac_f in -+ [\\/$]*) false;; -+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; -+ esac || -+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -+echo "$as_me: error: cannot find input file: $ac_f" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+ ac_file_inputs="$ac_file_inputs $ac_f" -+ done -+ -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ configure_input="Generated from "`IFS=: -+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." -+ if test x"$ac_file" != x-; then -+ configure_input="$ac_file. $configure_input" -+ { echo "$as_me:$LINENO: creating $ac_file" >&5 -+echo "$as_me: creating $ac_file" >&6;} -+ fi -+ -+ case $ac_tag in -+ *:-:* | *:-) cat >"$tmp/stdin";; -+ esac -+ ;; -+ esac -+ -+ ac_dir=`$as_dirname -- "$ac_file" || -+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$ac_file" : 'X\(//\)[^/]' \| \ -+ X"$ac_file" : 'X\(//\)$' \| \ -+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$ac_file" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { -+ as_dirs= -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || -+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X\(//\)[^/]' \| \ -+ X"$as_dir" : 'X\(//\)$' \| \ -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break -+ done -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} -+ { (exit 1); exit 1; }; }; } -+ ac_builddir=. -+ -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix -+ -+case $srcdir in -+ .) # We are building in place. -+ ac_srcdir=. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -+ -+ -+ case $ac_mode in -+ :F) -+ # -+ # CONFIG_FILE -+ # -+ -+ case $INSTALL in -+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; -+ esac -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If the template does not know about datarootdir, expand it. -+# FIXME: This hack should be removed a few years after 2.60. -+ac_datarootdir_hack=; ac_datarootdir_seen= -+ -+case `sed -n '/datarootdir/ { -+ p -+ q -+} -+/@datadir@/p -+/@docdir@/p -+/@infodir@/p -+/@localedir@/p -+/@mandir@/p -+' $ac_file_inputs` in -+*datarootdir*) ac_datarootdir_seen=yes;; -+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) -+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ ac_datarootdir_hack=' -+ s&@datadir@&$datadir&g -+ s&@docdir@&$docdir&g -+ s&@infodir@&$infodir&g -+ s&@localedir@&$localedir&g -+ s&@mandir@&$mandir&g -+ s&\\\${datarootdir}&$datarootdir&g' ;; -+esac -+_ACEOF -+ -+# Neutralize VPATH when `$srcdir' = `.'. -+# Shell code in configure.ac might set extrasub. -+# FIXME: do we really want to maintain this feature? -+cat >>$CONFIG_STATUS <<_ACEOF -+ sed "$ac_vpsub -+$extrasub -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+:t -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -+s&@configure_input@&$configure_input&;t t -+s&@top_builddir@&$ac_top_builddir_sub&;t t -+s&@srcdir@&$ac_srcdir&;t t -+s&@abs_srcdir@&$ac_abs_srcdir&;t t -+s&@top_srcdir@&$ac_top_srcdir&;t t -+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -+s&@builddir@&$ac_builddir&;t t -+s&@abs_builddir@&$ac_abs_builddir&;t t -+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -+s&@INSTALL@&$ac_INSTALL&;t t -+$ac_datarootdir_hack -+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out -+ -+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&5 -+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&2;} -+ -+ rm -f "$tmp/stdin" -+ case $ac_file in -+ -) cat "$tmp/out"; rm -f "$tmp/out";; -+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; -+ esac -+ ;; -+ -+ -+ -+ esac -+ -+done # for ac_tag -+ -+ -+{ (exit 0); exit 0; } -+_ACEOF -+chmod +x $CONFIG_STATUS -+ac_clean_files=$ac_clean_files_save -+ -+ -+# configure is writing to config.log, and then calls config.status. -+# config.status does its own redirection, appending to config.log. -+# Unfortunately, on DOS this fails, as config.log is still kept open -+# by configure, so config.status won't be able to write to it; its -+# output is simply discarded. So we exec the FD to /dev/null, -+# effectively closing config.log, so it can be properly (re)opened and -+# appended to by config.status. When coming back to configure, we -+# need to make the FD available again. -+if test "$no_create" != yes; then -+ ac_cs_success=: -+ ac_config_status_args= -+ test "$silent" = yes && -+ ac_config_status_args="$ac_config_status_args --quiet" -+ exec 5>/dev/null -+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false -+ exec 5>>config.log -+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which -+ # would make configure fail if this is the last instruction. -+ $ac_cs_success || { (exit 1); exit 1; } -+fi -+ -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure.in newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in ---- newlib-1.17.0/newlib/libc/sys/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,13 @@ -+dnl This is the newlib/libc/sys/avr32 configure.in file. -+dnl Process this file with autoconf to produce a configure script. -+ -+AC_PREREQ(2.59) -+AC_INIT([newlib],[NEWLIB_VERSION]) -+ -+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. -+AC_CONFIG_AUX_DIR(../../../..) -+ -+NEWLIB_CONFIGURE(../../..) -+ -+AC_CONFIG_FILES([Makefile]) -+AC_OUTPUT -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/crt0.S newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S ---- newlib-1.17.0/newlib/libc/sys/avr32/crt0.S 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,83 @@ -+ -+ .section .reset,"ax" -+ -+ .global _start -+ .type _start,@function -+_start: -+ /* Jump to wherever the linker thinks we are... */ -+ lddpc pc, .Ltext_vaddr -+ -+ .align 2 -+.Ltext_vaddr: -+ .word _stext -+ -+ .text -+ .global _stext -+_stext: -+ /* Zero marks the end of the outermost frame. */ -+ mov r7, 0 -+ -+ /* Set up the stack pointer to a fixed value */ -+ lda.w r10, _estack -+ -+ /* If _stack is -1 don't set sp, the stack is then probably -+ set by some other means i.e. by a bootloader. */ -+ cp r10, -1 -+ movne sp, r10 -+ -+ /* Copy the data segment into RAM if necessary. If data_lma -+ is equal to data then VMA==LMA and no copying is necessary. -+ The linker script must make sure that the data segment is at -+ least dword-aligned. */ -+ lda.w r11, _data_lma -+ lda.w r12, _data -+ cp.w r11, r12 -+ breq 1f -+ lda.w r10, _edata -+2: ld.d r8, r11++ -+ st.d r12++, r8 -+ cp.w r12, r10 -+ brlt 2b -+ -+ /* Zero the memory in the .bss section. */ -+1: lda.w r10, _end -+ lda.w r12, _edata -+ -+ mov r8, 0 -+ mov r9, 0 -+2: st.d r12++, r8 -+ cp.w r12, r10 -+ brlt 2b -+ -+ /* User dependent initialization */ -+ call _init_startup -+ -+ /* Register _fini function with atexit -+ The _fini function is responsible for calling destructiors */ -+ lda.w r12, _fini -+ call atexit -+ -+ /* Call _init in order to initialize constructors etc */ -+ call _init -+ -+ /*Initialize argv, use stack for keeping arguments. -+ _init_argv() returns argc in r12 and argv in r11 -+ and the total size used for the arguments in r10.*/ -+ mov r12, sp -+ /* Signal that we are storing the arguments in a stackwise -+ top down approach. */ -+ mov r11, 0 -+ call _init_argv -+ /* If initialization if argv is not handled then _init_argv -+ returns -1 so set argc to 0 and make sure no space is -+ allocated on the stack. */ -+ cp.w r12, -1 -+ moveq r12, 0 -+ moveq r10, 0 -+ sub sp, r10 -+ -+ /* Call main and call exit when it returns */ -+ call main -+ call exit -+ -+ .weak _data_lma -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am ---- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,18 @@ -+## Process this file with automake to generate Makefile.in -+ -+AUTOMAKE_OPTIONS = cygnus -+ -+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -+ -+AM_CCASFLAGS = $(INCLUDES) -+ -+noinst_LIBRARIES = lib.a -+ -+lib_a_SOURCES = syscalls.c setjmp.S -+lib_a_CCASFLAGS = $(AM_CCASFLAGS) -+lib_a_CFLAGS = $(AM_CFLAGS) -+ -+all: crt0.o -+ -+ACLOCAL_AMFLAGS = -I ../../.. -+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in ---- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,329 @@ -+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am -+ -+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -+# This Makefile.in is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -+# PARTICULAR PURPOSE. -+ -+ -+SHELL = @SHELL@ -+ -+srcdir = @srcdir@ -+top_srcdir = @top_srcdir@ -+VPATH = @srcdir@ -+prefix = @prefix@ -+exec_prefix = @exec_prefix@ -+ -+bindir = @bindir@ -+sbindir = @sbindir@ -+libexecdir = @libexecdir@ -+datadir = @datadir@ -+sysconfdir = @sysconfdir@ -+sharedstatedir = @sharedstatedir@ -+localstatedir = @localstatedir@ -+libdir = @libdir@ -+infodir = @infodir@ -+mandir = @mandir@ -+includedir = @includedir@ -+oldincludedir = /usr/include -+ -+DESTDIR = -+ -+pkgdatadir = $(datadir)/@PACKAGE@ -+pkglibdir = $(libdir)/@PACKAGE@ -+pkgincludedir = $(includedir)/@PACKAGE@ -+ -+top_builddir = . -+ -+ACLOCAL = @ACLOCAL@ -+AUTOCONF = @AUTOCONF@ -+AUTOMAKE = @AUTOMAKE@ -+AUTOHEADER = @AUTOHEADER@ -+ -+INSTALL = @INSTALL@ -+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) -+INSTALL_DATA = @INSTALL_DATA@ -+INSTALL_SCRIPT = @INSTALL_SCRIPT@ -+transform = @program_transform_name@ -+ -+NORMAL_INSTALL = : -+PRE_INSTALL = : -+POST_INSTALL = : -+NORMAL_UNINSTALL = : -+PRE_UNINSTALL = : -+POST_UNINSTALL = : -+build_alias = @build_alias@ -+build_triplet = @build@ -+host_alias = @host_alias@ -+host_triplet = @host@ -+target_alias = @target_alias@ -+target_triplet = @target@ -+AR = @AR@ -+AS = @AS@ -+CC = @CC@ -+CPP = @CPP@ -+EXEEXT = @EXEEXT@ -+LDFLAGS = @LDFLAGS@ -+MAINT = @MAINT@ -+MAKEINFO = @MAKEINFO@ -+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ -+OBJEXT = @OBJEXT@ -+PACKAGE = @PACKAGE@ -+RANLIB = @RANLIB@ -+VERSION = @VERSION@ -+aext = @aext@ -+libm_machine_dir = @libm_machine_dir@ -+machine_dir = @machine_dir@ -+newlib_basedir = @newlib_basedir@ -+oext = @oext@ -+sys_dir = @sys_dir@ -+ -+AUTOMAKE_OPTIONS = cygnus -+ -+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) -+ -+noinst_LIBRARIES = lib.a -+ -+lib_a_SOURCES = syscalls.c setjmp.S -+ -+ACLOCAL_AMFLAGS = -I ../../.. -+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host -+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs -+CONFIG_CLEAN_FILES = -+LIBRARIES = $(noinst_LIBRARIES) -+ -+ -+DEFS = @DEFS@ -I. -I$(srcdir) -+CPPFLAGS = -+LIBS = @LIBS@ -+lib_a_LIBADD = -+lib_a_OBJECTS = syscalls.o setjmp.o -+CFLAGS = @CFLAGS@ -+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -+CCLD = $(CC) -+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ -+DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in -+ -+ -+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -+ -+TAR = gtar -+GZIP_ENV = --best -+SOURCES = $(lib_a_SOURCES) -+OBJECTS = $(lib_a_OBJECTS) -+ -+all: all-redirect -+.SUFFIXES: -+.SUFFIXES: .S .c .o .s -+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -+ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile -+ -+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status -+ cd $(top_builddir) \ -+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status -+ -+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ -+ ../../../acinclude.m4 ../../../aclocal.m4 \ -+ ../../../libtool.m4 -+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -+ -+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) -+ $(SHELL) ./config.status --recheck -+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) -+ cd $(srcdir) && $(AUTOCONF) -+ -+mostlyclean-noinstLIBRARIES: -+ -+clean-noinstLIBRARIES: -+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -+ -+distclean-noinstLIBRARIES: -+ -+maintainer-clean-noinstLIBRARIES: -+ -+.c.o: -+ $(COMPILE) -c $< -+ -+.s.o: -+ $(COMPILE) -c $< -+ -+.S.o: -+ $(COMPILE) -c $< -+ -+mostlyclean-compile: -+ -rm -f *.o core *.core -+ -+clean-compile: -+ -+distclean-compile: -+ -rm -f *.tab.c -+ -+maintainer-clean-compile: -+ -+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) -+ -rm -f lib.a -+ $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) -+ $(RANLIB) lib.a -+ -+tags: TAGS -+ -+ID: $(HEADERS) $(SOURCES) $(LISP) -+ list='$(SOURCES) $(HEADERS)'; \ -+ unique=`for i in $$list; do echo $$i; done | \ -+ awk ' { files[$$0] = 1; } \ -+ END { for (i in files) print i; }'`; \ -+ here=`pwd` && cd $(srcdir) \ -+ && mkid -f$$here/ID $$unique $(LISP) -+ -+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) -+ tags=; \ -+ here=`pwd`; \ -+ list='$(SOURCES) $(HEADERS)'; \ -+ unique=`for i in $$list; do echo $$i; done | \ -+ awk ' { files[$$0] = 1; } \ -+ END { for (i in files) print i; }'`; \ -+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ -+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) -+ -+mostlyclean-tags: -+ -+clean-tags: -+ -+distclean-tags: -+ -rm -f TAGS ID -+ -+maintainer-clean-tags: -+ -+distdir = $(PACKAGE)-$(VERSION) -+top_distdir = $(distdir) -+ -+# This target untars the dist file and tries a VPATH configuration. Then -+# it guarantees that the distribution is self-contained by making another -+# tarfile. -+distcheck: dist -+ -rm -rf $(distdir) -+ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz -+ mkdir $(distdir)/=build -+ mkdir $(distdir)/=inst -+ dc_install_base=`cd $(distdir)/=inst && pwd`; \ -+ cd $(distdir)/=build \ -+ && ../configure --srcdir=.. --prefix=$$dc_install_base \ -+ && $(MAKE) $(AM_MAKEFLAGS) \ -+ && $(MAKE) $(AM_MAKEFLAGS) dvi \ -+ && $(MAKE) $(AM_MAKEFLAGS) check \ -+ && $(MAKE) $(AM_MAKEFLAGS) install \ -+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ -+ && $(MAKE) $(AM_MAKEFLAGS) dist -+ -rm -rf $(distdir) -+ @banner="$(distdir).tar.gz is ready for distribution"; \ -+ dashes=`echo "$$banner" | sed s/./=/g`; \ -+ echo "$$dashes"; \ -+ echo "$$banner"; \ -+ echo "$$dashes" -+dist: distdir -+ -chmod -R a+r $(distdir) -+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -+ -rm -rf $(distdir) -+dist-all: distdir -+ -chmod -R a+r $(distdir) -+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -+ -rm -rf $(distdir) -+distdir: $(DISTFILES) -+ -rm -rf $(distdir) -+ mkdir $(distdir) -+ -chmod 777 $(distdir) -+ @for file in $(DISTFILES); do \ -+ if test -f $$file; then d=.; else d=$(srcdir); fi; \ -+ if test -d $$d/$$file; then \ -+ cp -pr $$d/$$file $(distdir)/$$file; \ -+ else \ -+ test -f $(distdir)/$$file \ -+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ -+ || cp -p $$d/$$file $(distdir)/$$file || :; \ -+ fi; \ -+ done -+info-am: -+info: info-am -+dvi-am: -+dvi: dvi-am -+check-am: -+check: check-am -+installcheck-am: -+installcheck: installcheck-am -+install-info-am: -+install-info: install-info-am -+install-exec-am: -+install-exec: install-exec-am -+ -+install-data-am: -+install-data: install-data-am -+ -+install-am: all-am -+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -+install: install-am -+uninstall-am: -+uninstall: uninstall-am -+all-am: Makefile $(LIBRARIES) -+all-redirect: all-am -+install-strip: -+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -+installdirs: -+ -+ -+mostlyclean-generic: -+ -+clean-generic: -+ -+distclean-generic: -+ -rm -f Makefile $(CONFIG_CLEAN_FILES) -+ -rm -f config.cache config.log stamp-h stamp-h[0-9]* -+ -+maintainer-clean-generic: -+mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ -+ mostlyclean-tags mostlyclean-generic -+ -+mostlyclean: mostlyclean-am -+ -+clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ -+ mostlyclean-am -+ -+clean: clean-am -+ -+distclean-am: distclean-noinstLIBRARIES distclean-compile \ -+ distclean-tags distclean-generic clean-am -+ -+distclean: distclean-am -+ -rm -f config.status -+ -+maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ -+ maintainer-clean-compile maintainer-clean-tags \ -+ maintainer-clean-generic distclean-am -+ @echo "This command is intended for maintainers to use;" -+ @echo "it deletes files that may require special tools to rebuild." -+ -+maintainer-clean: maintainer-clean-am -+ -rm -f config.status -+ -+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ -+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ -+mostlyclean-compile distclean-compile clean-compile \ -+maintainer-clean-compile tags mostlyclean-tags distclean-tags \ -+clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ -+check-am installcheck-am installcheck install-info-am install-info \ -+install-exec-am install-exec install-data-am install-data install-am \ -+install uninstall-am uninstall all-redirect all-am all installdirs \ -+mostlyclean-generic distclean-generic clean-generic \ -+maintainer-clean-generic clean mostlyclean distclean maintainer-clean -+ -+ -+all: crt0.o -+ -+# Tell versions [3.59,3.63) of GNU make to not export all variables. -+# Otherwise a system limit (for SysV at least) may be exceeded. -+.NOEXPORT: -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S ---- newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,20 @@ -+ .text -+ .globl setjmp -+setjmp: -+ stm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr -+ retal 0 -+ -+ .globl longjmp -+longjmp: -+ ldm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr -+ /* Put the return value into the integer result register. -+ But if it is zero then return 1 instead. */ -+ cp r11, 0 -+ reteq 1 -+ retal r11 -+ -+ -+ -+ -+ -+ -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h ---- newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,158 @@ -+#ifndef __ASM_AVR32_SYSREGS_H -+#define __ASM_AVR32_SYSREGS_H -+ -+#define SYSREG_SR 0 -+#define SYSREG_EVBA 4 -+#define SYSREG_ACBA 8 -+#define SYSREG_CPUCR 12 -+#define SYSREG_ECR 16 -+#define SYSREG_RSR_SUP 20 -+#define SYSREG_RSR_INT0 24 -+#define SYSREG_RSR_INT1 28 -+#define SYSREG_RSR_INT2 32 -+#define SYSREG_RSR_INT3 36 -+#define SYSREG_RSR_EX 40 -+#define SYSREG_RSR_NMI 44 -+#define SYSREG_RSR_DBG 48 -+#define SYSREG_RAR_SUP 52 -+#define SYSREG_RAR_INT0 56 -+#define SYSREG_RAR_INT1 60 -+#define SYSREG_RAR_INT2 64 -+#define SYSREG_RAR_INT3 68 -+#define SYSREG_RAR_EX 72 -+#define SYSREG_RAR_NMI 76 -+#define SYSREG_RAR_DBG 80 -+#define SYSREG_JECR 84 -+#define SYSREG_JOSP 88 -+#define SYSREG_JAVA_LV0 92 -+#define SYSREG_JAVA_LV1 96 -+#define SYSREG_JAVA_LV2 100 -+#define SYSREG_JAVA_LV3 104 -+#define SYSREG_JAVA_LV4 108 -+#define SYSREG_JAVA_LV5 112 -+#define SYSREG_JAVA_LV6 116 -+#define SYSREG_JAVA_LV7 120 -+#define SYSREG_JTBA 124 -+#define SYSREG_JBCR 128 -+ -+#define SYSREG_CONFIG0 256 -+#define SYSREG_CONFIG1 260 -+#define SYSREG_COUNT 264 -+#define SYSREG_COMPARE 268 -+ -+#define SYSREG_BEAR 316 -+ -+/* MMU interface registers */ -+#define SYSREG_TLBEHI 272 -+#define SYSREG_TLBELO 276 -+#define SYSREG_PTBR 280 -+#define SYSREG_TLBEAR 284 -+#define SYSREG_MMUCR 288 -+#define SYSREG_TLBARLO 292 -+#define SYSREG_TLBDRLO 296 -+#define SYSREG_TLBARHI 300 -+#define SYSREG_TLBDRHI 304 -+ -+/* Performance counter */ -+#define SYSREG_PCCR 320 -+ -+ // Status register bits -+#define SR_C_OFFSET 0 -+#define SR_Z_OFFSET 1 -+#define SR_N_OFFSET 2 -+#define SR_V_OFFSET 3 -+#define SR_Q_OFFSET 4 -+#define SR_T_OFFSET 14 -+#define SR_R_OFFSET 15 -+#define SR_GM_OFFSET 16 -+#define SR_I0M_OFFSET 17 -+#define SR_I1M_OFFSET 18 -+#define SR_I2M_OFFSET 19 -+#define SR_I3M_OFFSET 20 -+#define SR_EM_OFFSET 21 -+#define SR_M0_OFFSET 22 -+#define SR_M1_OFFSET 23 -+#define SR_M2_OFFSET 24 -+#define SR_D_OFFSET 26 -+#define SR_DM_OFFSET 27 -+#define SR_J_OFFSET 28 -+ -+#define SR_C (1 << 0) -+#define SR_Z (1 << 1) -+#define SR_N (1 << 2) -+#define SR_V (1 << 3) -+#define SR_Q (1 << 4) -+#define SR_T (1 << 14) -+#define SR_R (1 << 15) -+#define SR_GM (1 << 16) -+#define SR_I0M (1 << 17) -+#define SR_I1M (1 << 18) -+#define SR_I2M (1 << 19) -+#define SR_I3M (1 << 20) -+#define SR_EM (1 << 21) -+#define SR_M0 (1 << 22) -+#define SR_M1 (1 << 23) -+#define SR_M2 (1 << 24) -+#define SR_D (1 << 26) -+#define SR_DM (1 << 27) -+#define SR_J (1 << 28) -+ -+//PCCR bits -+#define PCCRS (1<<3) -+#define PCCRC (1<<2) -+#define PCCRR (1<<1) -+#define PCCRE (1<<0) -+#define PCCNT_PRESCALE 64 -+ -+//TLBEHI bits -+#define TLBEHIVPN (1<<10) -+#define TLBEHIV (1<<9) -+#define TLBEHII (1<<0) -+ -+//TLBELO = bits -+#define TLBELOPFN (1<<10) -+#define TLBELOC (1<<9) -+#define TLBELOG (1<<8) -+#define TLBELOB (1<<7) -+#define TLBELOAP (1<<5) -+#define TLBELOSZ (1<<2) -+#define TLBELOD (1<<1) -+#define TLBELOW (1<<0) -+ -+//MMUCR bits -+#define MMUIRP (1<<26) -+#define MMUILA (1<<20) -+#define MMUDRP (1<<14) -+#define MMUDLA (1<<8) -+#define MMUS (1<<4) -+#define MMUN (1<<3) -+#define MMUI (1<<2) -+#define MMUM (1<<1) -+#define MMUE (1<<0) -+ -+// Relative offsets to EVBA -+#define H_UNREC_EX 0x000 -+#define H_TLB_MH 0x004 -+#define H_BUS_ERR_D 0x008 -+#define H_BUS_ERR_I 0x00C -+#define H_NMI 0x010 -+#define H_INST_ADDR 0x014 -+#define H_ITLB_MISS 0x050 -+#define H_ITLB_PROT 0x018 -+#define H_DEBUG 0x01C -+#define H_ILL_OPC 0x020 -+#define H_UNIMPL_INST 0x024 -+#define H_PRIV_VIOL 0x028 -+#define H_FLOAT_PT 0x02C -+#define H_COPROC_ABS 0x030 -+#define H_SCALL 0x100 -+#define H_DATA_ADDR_R 0x034 -+#define H_DATA_ADDR_W 0x038 -+#define H_DTLB_MISS_R 0x060 -+#define H_DTLB_MISS_W 0x070 -+#define H_DTLB_PROT_R 0x03C -+#define H_DTLB_PROT_W 0x040 -+#define H_DTLB_MOD 0x044 -+ -+ -+#endif /* __ASM_AVR32_SYSREGS_H */ -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c ---- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,234 @@ -+#include "syscalls.h" -+#include "sys/sysregs.h" -+#include <sys/times.h> -+#include <sys/time.h> -+#include <stdio.h> -+#include <errno.h> -+ -+int __attribute__((weak)) -+ _init_startup () -+{ -+ return 0; -+} -+ -+ -+clock_t __attribute__((weak)) -+ _times( struct tms *tms ) -+{ -+ int tick; -+ tick = __builtin_mfsr(SYSREG_COUNT); -+ tms->tms_utime = 0; -+ tms->tms_stime = tick; -+ tms->tms_cutime = 0; -+ tms->tms_cstime = 0; -+ return tick; -+} -+ -+extern void __heap_start__, __heap_end__; -+ -+void * __attribute__((weak)) -+ _sbrk(int increment) -+{ -+ static void *cur_heap_pos = 0; -+ -+ //Initialize cur_heap_pos -+ if ( cur_heap_pos == 0 ) -+ cur_heap_pos = &__heap_start__; -+ -+ if ( (cur_heap_pos + increment) <= &__heap_end__ ){ -+ void *heap_pos = cur_heap_pos; -+ cur_heap_pos += increment; -+ return heap_pos; -+ } else { -+#ifdef DEBUG_MSG_ON -+ fprintf(stderr, "Warning: Heap is running full trying to allocate %i bytes!!!!\n", increment); -+ fprintf(stderr, "\tHeap start address\t= 0x%x\n", &__heap_start__); -+ fprintf(stderr, "\tHeap end address\t= 0x%x\n", &__heap_end__); -+ fprintf(stderr, "\tCurrent heap address\t= 0x%x\n", cur_heap_pos); -+ fflush(stderr); -+#endif -+ errno = ENOMEM; -+ return (void *)-1; -+ } -+ return (void *)-1; -+} -+ -+void __attribute__((weak,naked)) -+ _init_argv (void *arg_mem_top) -+{ -+ T2H_SYSCALL(T2H_SYSCALL_INIT_ARGV); -+ T2H_SYSCALL_RETURN(); -+} -+ -+void __attribute__((weak,naked)) -+ _exit( int code ) -+{ -+ T2H_SYSCALL(T2H_SYSCALL_EXIT); -+ while (1); -+} -+ -+int __attribute__((weak,naked)) -+ _open (char *pathname, int flags, int mode) -+{ -+ T2H_SYSCALL(T2H_SYSCALL_OPEN); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak,naked)) -+ _close (int file) -+{ -+ T2H_SYSCALL(T2H_SYSCALL_CLOSE); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak,naked)) -+ _lseek( int filedes, int offset, int whence ) -+{ -+ T2H_SYSCALL(T2H_SYSCALL_LSEEK); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+ -+int __attribute__((weak,naked)) -+ _read (int file, -+ char * ptr, -+ int len){ -+ T2H_SYSCALL(T2H_SYSCALL_READ); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak,naked)) -+ _write (int file, -+ char * ptr, -+ int len){ -+ T2H_SYSCALL(T2H_SYSCALL_WRITE); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak,naked)) -+ isatty (int desc){ -+ T2H_SYSCALL(T2H_SYSCALL_ISATTY); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+static void _convert_host2target_stat(struct stat *target_stat, struct host_stat *host_stat) -+{ -+ target_stat->st_dev = (dev_t)host_stat->st_dev; -+ target_stat->st_ino = (ino_t)host_stat->st_ino; -+ target_stat->st_mode = (mode_t)host_stat->st_mode; -+ target_stat->st_nlink = (nlink_t)host_stat->st_nlink; -+ target_stat->st_uid = (uid_t)host_stat->st_uid; -+ target_stat->st_gid = (gid_t)host_stat->st_gid; -+ target_stat->st_rdev = (dev_t)host_stat->st_rdev; -+ target_stat->st_size = (off_t)host_stat->st_size; -+ target_stat->st_blksize = (long)host_stat->st_blksize; -+ target_stat->st_blocks = (long)host_stat->st_blocks; -+ target_stat->st_atime = (time_t)host_stat->st_atime; -+ target_stat->st_mtime = (time_t)host_stat->st_mtime; -+ target_stat->st_ctime = (time_t)host_stat->st_ctime; -+} -+ -+int __attribute__((naked)) -+ _fstat_host (int filedes, struct host_stat *ptr){ -+ T2H_SYSCALL(T2H_SYSCALL_FSTAT); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((naked)) -+ _stat_host (const char *filename, struct host_stat *ptr){ -+ T2H_SYSCALL(T2H_SYSCALL_STAT); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak)) -+ _fstat (int filedes, struct stat *stat){ -+ struct host_stat host_stat; -+ if ( _fstat_host (filedes, &host_stat) < 0 ) -+ return -1; -+ _convert_host2target_stat (stat, &host_stat); -+ return 0; -+} -+ -+int __attribute__((weak)) -+ _stat (const char *filename, struct stat *stat){ -+ struct host_stat host_stat; -+ if ( _stat_host (filename, &host_stat) < 0) -+ return -1; -+ _convert_host2target_stat (stat, &host_stat); -+ return 0; -+} -+ -+ -+int __attribute__((naked)) -+ _gettimeofday_host (struct host_timeval *tv, struct timezone *tz){ -+ T2H_SYSCALL(T2H_SYSCALL_GETTIMEOFDAY); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak)) -+ _gettimeofday (struct timeval *tv, struct timezone *tz){ -+ struct host_timeval host_tv; -+ if ( _gettimeofday_host (&host_tv, tz) < 0 ) -+ return -1; -+ tv->tv_sec = (long)host_tv.tv_sec; -+ tv->tv_usec = (long)host_tv.tv_usec; -+ return 0; -+} -+ -+int __attribute__((weak,naked)) -+ _unlink (const char *path){ -+ T2H_SYSCALL(T2H_SYSCALL_UNLINK); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak,naked)) -+ _system (const char *command){ -+ T2H_SYSCALL(T2H_SYSCALL_SYSTEM); -+ T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); -+} -+ -+int __attribute__((weak)) -+ _execve (){ -+ return -1; -+} -+ -+ -+int __attribute__((weak)) -+ _fork (){ -+ return -1; -+} -+ -+int __attribute__((weak)) -+ _wait (){ -+ return -1; -+} -+ -+int __attribute__((weak)) -+ sigfillset (){ -+ return -1; -+} -+ -+int __attribute__((weak)) -+ sigprocmask (){ -+ return -1; -+} -+ -+int __attribute__((weak)) -+ _fcntl (){ -+ return -1; -+} -+ -+int __attribute__((weak)) -+ _link (){ -+ return -1; -+} -+ -+int __attribute__((weak)) -+ _kill (){ -+ return -1; -+} -+ -+int __attribute__((weak)) -+ _getpid (){ -+ return -1; -+} -diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h ---- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h 1970-01-01 01:00:00.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h 2009-05-22 09:57:50.000000000 +0200 -@@ -0,0 +1,72 @@ -+#ifndef __SYSCALLS_H__ -+#define __SYSCALLS_H__ -+ -+#include <sys/stat.h> -+#include <errno.h> -+ -+struct host_stat { -+ unsigned int st_dev; /* device */ -+ unsigned int st_ino; /* inode */ -+ mode_t st_mode; /* protection */ -+ unsigned int st_nlink; /* number of hard links */ -+ unsigned int st_uid; /* user ID of owner */ -+ unsigned int st_gid; /* group ID of owner */ -+ unsigned int st_rdev; /* device type (if inode device) */ -+ unsigned long long st_size; /* total size, in bytes */ -+ unsigned long long st_blksize; /* blocksize for filesystem I/O */ -+ unsigned long long st_blocks; /* number of blocks allocated */ -+ time_t st_atime; /* time of last access */ -+ time_t st_mtime; /* time of last modification */ -+ time_t st_ctime; /* time of last change */ -+}; -+ -+struct host_timeval { -+ time_t tv_sec; -+ long long tv_usec; -+}; -+ -+ -+#define T2H_SYSCALL_OPEN 1 -+#define T2H_SYSCALL_CLOSE 2 -+#define T2H_SYSCALL_READ 3 -+#define T2H_SYSCALL_WRITE 4 -+#define T2H_SYSCALL_LSEEK 5 -+#define T2H_SYSCALL_RENAME 6 -+#define T2H_SYSCALL_UNLINK 7 -+#define T2H_SYSCALL_STAT 8 -+#define T2H_SYSCALL_FSTAT 9 -+#define T2H_SYSCALL_GETTIMEOFDAY 10 -+#define T2H_SYSCALL_ISATTY 11 -+#define T2H_SYSCALL_SYSTEM 12 -+#define T2H_SYSCALL_EXIT 13 -+#define T2H_SYSCALL_INIT_ARGV 14 -+ -+ -+/* The breakpoint/mov r12,-1/mov r11,... pattern causes -+ the debugger to be able to recognize the system call. -+ If the debug system is not enabled then the breakpoint -+ is executed as a nop and r12 set to -1 and errno to -+ ENOSYS. The debugger is responsible for setting r12 -+ and r11 and skipping the instructions after the breakpoint -+ which would otherwise set these registers. -+*/ -+#define T2H_SYSCALL(syscall_code) \ -+ asm ("mov r8, %0\n" \ -+ "breakpoint\n" \ -+ "mov r12, -1\n" \ -+ "mov r11, %1\n" \ -+ :: "i" (syscall_code), "i" (ENOSYS) ); -+ -+#define T2H_SYSCALL_CHECK_ERROR_AND_RETURN() \ -+ asm ("cp.w r12, 0\n" \ -+ "retge r12\n" \ -+ "lda.w r10, errno\n" \ -+ "st.w r10[0], r11\n" \ -+ "ret r12\n" \ -+ ".align 2\n" \ -+ ".cpool\n"); -+ -+#define T2H_SYSCALL_RETURN() \ -+ asm ("ret r12\n"); -+ -+#endif -diff -Naur newlib-1.17.0/newlib/libc/sys/configure newlib-1.17.0-new/newlib/libc/sys/configure ---- newlib-1.17.0/newlib/libc/sys/configure 2008-12-22 20:45:49.000000000 +0100 -+++ newlib-1.17.0-new/newlib/libc/sys/configure 2009-05-22 09:57:50.000000000 +0200 -@@ -1,25 +1,54 @@ - #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. --# Generated by GNU Autoconf 2.59 for newlib 1.17.0. -+# Generated by GNU Autoconf 2.61 for newlib 1.17.0. - # --# Copyright (C) 2003 Free Software Foundation, Inc. -+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - # This configure script is free software; the Free Software Foundation - # gives unlimited permission to copy, distribute and modify it. - ## --------------------- ## - ## M4sh Initialization. ## - ## --------------------- ## - --# Be Bourne compatible -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh - fi --DUALCASE=1; export DUALCASE # for MKS sh - - # Support unset when possible. - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -29,8 +58,43 @@ - fi - - -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ - # Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done - PS1='$ ' - PS2='> ' - PS4='+ ' -@@ -44,18 +108,19 @@ - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else -- $as_unset $as_var -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi - done - - # Required to use basename. --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename - else - as_basename=false -@@ -63,157 +128,388 @@ - - - # Name of the executable. --as_me=`$as_basename "$0" || -+as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)$' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || - echo X/"$0" | -- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -- /^X\/\(\/\/\)$/{ s//\1/; q; } -- /^X\/\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - -+# CDPATH. -+$as_unset CDPATH - --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits - --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh -+if test "x$CONFIG_SHELL" = x; then -+ if (eval ":") 2>/dev/null; then -+ as_have_required=yes -+else -+ as_have_required=no - fi - -+ if test $as_have_required = yes && (eval ": -+(as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} - -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi - -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=\$LINENO -+ as_lineno_2=\$LINENO -+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && -+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -+") 2> /dev/null; then -+ : -+else -+ as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -+ case $as_dir in - /*) -- if ("$as_dir/$as_base" -c ' -+ for as_base in sh bash ksh sh5; do -+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" -+ done;; -+ esac -+done -+IFS=$as_save_IFS -+ -+ -+ for as_shell in $as_candidate_shells $SHELL; do -+ # Try only shells that exist, to save several forks. -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { ("$as_shell") 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+_ASEOF -+}; then -+ CONFIG_SHELL=$as_shell -+ as_have_required=yes -+ if { "$as_shell" 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+(as_func_return () { -+ (exit $1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = "$1" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test $exitcode = 0) || { (exit 1); exit 1; } -+ -+( - as_lineno_1=$LINENO - as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -+ -+_ASEOF -+}; then -+ break -+fi -+ -+fi -+ -+ done -+ -+ if test "x$CONFIG_SHELL" != x; then -+ for as_var in BASH_ENV ENV -+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ done -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ -+ if test $as_have_required = no; then -+ echo This script requires a shell more modern than all the -+ echo shells that I found on your system. Please install a -+ echo modern shell, or manually run the script under such a -+ echo shell if you do have one. -+ { (exit 1); exit 1; } -+fi -+ -+ -+fi -+ -+fi -+ -+ -+ -+(eval "as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0") || { -+ echo No shell found that supports shell functions. -+ echo Please tell autoconf@gnu.org about your system, -+ echo including any error possibly output before this -+ echo message -+} -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | - sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno - N -- s,$,-, -- : loop -- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -+ s/-\n.*// - ' >$as_me.lineno && -- chmod +x $as_me.lineno || -+ chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" - # Exit status is that of the last command. - exit - } - - --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; - esac - --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - - rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi - echo >conf$$.file - if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -- else -- as_ln_s='ln -s' -- fi - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi --rm -f conf$$ conf$$.exe conf$$.file -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null - - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -@@ -222,7 +518,28 @@ - as_mkdir_p=false - fi - --as_executable_p="test -f" -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x - - # Sed expression to map a string onto a valid CPP name. - as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -@@ -231,15 +548,6 @@ - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH -- - - - # Check that we are running under the correct shell. -@@ -390,29 +698,26 @@ - - - -+exec 7<&0 </dev/null 6>&1 -+ - # Name of the host. - # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, - # so uname gets run too. - ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - --exec 6>&1 -- - # - # Initializations. - # - ac_default_prefix=/usr/local -+ac_clean_files= - ac_config_libobj_dir=. -+LIBOBJS= - cross_compiling=no - subdirs= - MFLAGS= - MAKEFLAGS= - SHELL=${CONFIG_SHELL-/bin/sh} - --# Maximum number of lines to put in a shell here document. --# This variable seems obsolete. It should probably be removed, and --# only ac_max_sed_lines should be used. --: ${ac_max_here_lines=38} -- - # Identity of this package. - PACKAGE_NAME='newlib' - PACKAGE_TARNAME='newlib' -@@ -424,66 +729,214 @@ - # Factoring default headers for most tests. - ac_includes_default="\ - #include <stdio.h> --#if HAVE_SYS_TYPES_H -+#ifdef HAVE_SYS_TYPES_H - # include <sys/types.h> - #endif --#if HAVE_SYS_STAT_H -+#ifdef HAVE_SYS_STAT_H - # include <sys/stat.h> - #endif --#if STDC_HEADERS -+#ifdef STDC_HEADERS - # include <stdlib.h> - # include <stddef.h> - #else --# if HAVE_STDLIB_H -+# ifdef HAVE_STDLIB_H - # include <stdlib.h> - # endif - #endif --#if HAVE_STRING_H --# if !STDC_HEADERS && HAVE_MEMORY_H -+#ifdef HAVE_STRING_H -+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H - # include <memory.h> - # endif - # include <string.h> - #endif --#if HAVE_STRINGS_H -+#ifdef HAVE_STRINGS_H - # include <strings.h> - #endif --#if HAVE_INTTYPES_H -+#ifdef HAVE_INTTYPES_H - # include <inttypes.h> --#else --# if HAVE_STDINT_H --# include <stdint.h> --# endif - #endif --#if HAVE_UNISTD_H -+#ifdef HAVE_STDINT_H -+# include <stdint.h> -+#endif -+#ifdef HAVE_UNISTD_H - # include <unistd.h> - #endif" - --ac_subdirs_all="$ac_subdirs_all a29khif" --ac_subdirs_all="$ac_subdirs_all arc" --ac_subdirs_all="$ac_subdirs_all arm" --ac_subdirs_all="$ac_subdirs_all d10v" --ac_subdirs_all="$ac_subdirs_all decstation" --ac_subdirs_all="$ac_subdirs_all h8300hms" --ac_subdirs_all="$ac_subdirs_all h8500hms" --ac_subdirs_all="$ac_subdirs_all linux" --ac_subdirs_all="$ac_subdirs_all m88kbug" --ac_subdirs_all="$ac_subdirs_all mmixware" --ac_subdirs_all="$ac_subdirs_all netware" --ac_subdirs_all="$ac_subdirs_all rdos" --ac_subdirs_all="$ac_subdirs_all rtems" --ac_subdirs_all="$ac_subdirs_all sh" --ac_subdirs_all="$ac_subdirs_all sparc64" --ac_subdirs_all="$ac_subdirs_all sun4" --ac_subdirs_all="$ac_subdirs_all sysmec" --ac_subdirs_all="$ac_subdirs_all sysnec810" --ac_subdirs_all="$ac_subdirs_all sysnecv850" --ac_subdirs_all="$ac_subdirs_all sysvi386" --ac_subdirs_all="$ac_subdirs_all sysvnecv70" --ac_subdirs_all="$ac_subdirs_all tic80" --ac_subdirs_all="$ac_subdirs_all w65" --ac_subdirs_all="$ac_subdirs_all z8ksim" --ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs CRT0 HAVE_SYS_DIR_TRUE HAVE_SYS_DIR_FALSE LIBOBJS LTLIBOBJS' -+ac_subst_vars='SHELL -+PATH_SEPARATOR -+PACKAGE_NAME -+PACKAGE_TARNAME -+PACKAGE_VERSION -+PACKAGE_STRING -+PACKAGE_BUGREPORT -+exec_prefix -+prefix -+program_transform_name -+bindir -+sbindir -+libexecdir -+datarootdir -+datadir -+sysconfdir -+sharedstatedir -+localstatedir -+includedir -+oldincludedir -+docdir -+infodir -+htmldir -+dvidir -+pdfdir -+psdir -+libdir -+localedir -+mandir -+DEFS -+ECHO_C -+ECHO_N -+ECHO_T -+LIBS -+build_alias -+host_alias -+target_alias -+MAY_SUPPLY_SYSCALLS_TRUE -+MAY_SUPPLY_SYSCALLS_FALSE -+newlib_basedir -+build -+build_cpu -+build_vendor -+build_os -+host -+host_cpu -+host_vendor -+host_os -+INSTALL_PROGRAM -+INSTALL_SCRIPT -+INSTALL_DATA -+CYGPATH_W -+PACKAGE -+VERSION -+ACLOCAL -+AUTOCONF -+AUTOMAKE -+AUTOHEADER -+MAKEINFO -+install_sh -+STRIP -+INSTALL_STRIP_PROGRAM -+mkdir_p -+AWK -+SET_MAKE -+am__leading_dot -+AMTAR -+am__tar -+am__untar -+CC -+DEPDIR -+am__include -+am__quote -+AMDEP_TRUE -+AMDEP_FALSE -+AMDEPBACKSLASH -+CCDEPMODE -+am__fastdepCC_TRUE -+am__fastdepCC_FALSE -+AS -+AR -+RANLIB -+READELF -+MAINTAINER_MODE_TRUE -+MAINTAINER_MODE_FALSE -+MAINT -+CCAS -+CCASFLAGS -+NEWLIB_CFLAGS -+LDFLAGS -+ELIX_LEVEL_0_TRUE -+ELIX_LEVEL_0_FALSE -+ELIX_LEVEL_1_TRUE -+ELIX_LEVEL_1_FALSE -+ELIX_LEVEL_2_TRUE -+ELIX_LEVEL_2_FALSE -+ELIX_LEVEL_3_TRUE -+ELIX_LEVEL_3_FALSE -+ELIX_LEVEL_4_TRUE -+ELIX_LEVEL_4_FALSE -+USE_LIBTOOL_TRUE -+USE_LIBTOOL_FALSE -+OBJEXT -+oext -+aext -+lpfx -+libm_machine_dir -+machine_dir -+sys_dir -+SED -+DLLTOOL -+OBJDUMP -+LIBTOOL -+CFLAGS -+CPPFLAGS -+ac_ct_CC -+EXEEXT -+GREP -+EGREP -+FGREP -+LD -+DUMPBIN -+ac_ct_DUMPBIN -+NM -+LN_S -+lt_ECHO -+DSYMUTIL -+NMEDIT -+LIPO -+OTOOL -+OTOOL64 -+CPP -+subdirs -+CRT0 -+HAVE_SYS_DIR_TRUE -+HAVE_SYS_DIR_FALSE -+LIBOBJS -+LTLIBOBJS' - ac_subst_files='' -+ ac_precious_vars='build_alias -+host_alias -+target_alias -+CCAS -+CCASFLAGS -+CC -+CFLAGS -+LDFLAGS -+LIBS -+CPPFLAGS -+CPP' -+ac_subdirs_all='a29khif -+arc -+arm -+avr32 -+d10v -+decstation -+h8300hms -+h8500hms -+linux -+m88kbug -+mmixware -+netware -+rdos -+rtems -+sh -+sparc64 -+sun4 -+sysmec -+sysnec810 -+sysnecv850 -+sysvi386 -+sysvnecv70 -+tic80 -+w65 -+z8ksim' - - # Initialize some variables set by options. - ac_init_help= -@@ -510,34 +963,48 @@ - # and all the variables that are supposed to be based on exec_prefix - # by default will actually change. - # Use braces instead of parens because sh, perl, etc. also accept them. -+# (The list follows the same order as the GNU Coding Standards.) - bindir='${exec_prefix}/bin' - sbindir='${exec_prefix}/sbin' - libexecdir='${exec_prefix}/libexec' --datadir='${prefix}/share' -+datarootdir='${prefix}/share' -+datadir='${datarootdir}' - sysconfdir='${prefix}/etc' - sharedstatedir='${prefix}/com' - localstatedir='${prefix}/var' --libdir='${exec_prefix}/lib' - includedir='${prefix}/include' - oldincludedir='/usr/include' --infodir='${prefix}/info' --mandir='${prefix}/man' -+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -+infodir='${datarootdir}/info' -+htmldir='${docdir}' -+dvidir='${docdir}' -+pdfdir='${docdir}' -+psdir='${docdir}' -+libdir='${exec_prefix}/lib' -+localedir='${datarootdir}/locale' -+mandir='${datarootdir}/man' - - ac_prev= -+ac_dashdash= - for ac_option - do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then -- eval "$ac_prev=\$ac_option" -+ eval $ac_prev=\$ac_option - ac_prev= - continue - fi - -- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` -+ case $ac_option in -+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *) ac_optarg=yes ;; -+ esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - -- case $ac_option in -+ case $ac_dashdash$ac_option in -+ --) -+ ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; -@@ -559,33 +1026,45 @@ - --config-cache | -C) - cache_file=config.cache ;; - -- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) -+ -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; -- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ -- | --da=*) -+ -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - -+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ -+ | --dataroo | --dataro | --datar) -+ ac_prev=datarootdir ;; -+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ -+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) -+ datarootdir=$ac_optarg ;; -+ - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- eval "enable_$ac_feature=no" ;; -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=no ;; -+ -+ -docdir | --docdir | --docdi | --doc | --do) -+ ac_prev=docdir ;; -+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) -+ docdir=$ac_optarg ;; -+ -+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) -+ ac_prev=dvidir ;; -+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) -+ dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } -- ac_feature=`echo $ac_feature | sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -- esac -- eval "enable_$ac_feature='$ac_optarg'" ;; -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -@@ -612,6 +1091,12 @@ - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - -+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) -+ ac_prev=htmldir ;; -+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ -+ | --ht=*) -+ htmldir=$ac_optarg ;; -+ - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; -@@ -636,13 +1121,16 @@ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - -+ -localedir | --localedir | --localedi | --localed | --locale) -+ ac_prev=localedir ;; -+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) -+ localedir=$ac_optarg ;; -+ - -localstatedir | --localstatedir | --localstatedi | --localstated \ -- | --localstate | --localstat | --localsta | --localst \ -- | --locals | --local | --loca | --loc | --lo) -+ | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ -- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ -- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) -+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) -@@ -707,6 +1195,16 @@ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - -+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) -+ ac_prev=pdfdir ;; -+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) -+ pdfdir=$ac_optarg ;; -+ -+ -psdir | --psdir | --psdi | --psd | --ps) -+ ac_prev=psdir ;; -+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) -+ psdir=$ac_optarg ;; -+ - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; -@@ -759,24 +1257,20 @@ - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package| sed 's/-/_/g'` -- case $ac_option in -- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; -- *) ac_optarg=yes ;; -- esac -- eval "with_$ac_package='$ac_optarg'" ;; -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=\$ac_optarg ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. -- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } -- ac_package=`echo $ac_package | sed 's/-/_/g'` -- eval "with_$ac_package=no" ;; -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=no ;; - - --x) - # Obsolete; use --with-x. -@@ -807,8 +1301,7 @@ - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } -- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` -- eval "$ac_envvar='$ac_optarg'" -+ eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) -@@ -828,27 +1321,19 @@ - { (exit 1); exit 1; }; } - fi - --# Be sure to have absolute paths. --for ac_var in exec_prefix prefix --do -- eval ac_val=$`echo $ac_var` -- case $ac_val in -- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -- esac --done -- --# Be sure to have absolute paths. --for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ -- localstatedir libdir includedir oldincludedir infodir mandir -+# Be sure to have absolute directory names. -+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ -+ datadir sysconfdir sharedstatedir localstatedir includedir \ -+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ -+ libdir localedir mandir - do -- eval ac_val=$`echo $ac_var` -+ eval ac_val=\$$ac_var - case $ac_val in -- [\\/$]* | ?:[\\/]* ) ;; -- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -- { (exit 1); exit 1; }; };; -+ [\\/$]* | ?:[\\/]* ) continue;; -+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac -+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; } - done - - # There might be people who depend on the old broken behavior: `$host' -@@ -875,82 +1360,76 @@ - test "$silent" = yes && exec 6>/dev/null - - -+ac_pwd=`pwd` && test -n "$ac_pwd" && -+ac_ls_di=`ls -di .` && -+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -+ { echo "$as_me: error: Working directory cannot be determined" >&2 -+ { (exit 1); exit 1; }; } -+test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -+ { echo "$as_me: error: pwd does not report name of working directory" >&2 -+ { (exit 1); exit 1; }; } -+ -+ - # Find the source files, if location was not specified. - if test -z "$srcdir"; then - ac_srcdir_defaulted=yes -- # Try the directory containing this script, then its parent. -- ac_confdir=`(dirname "$0") 2>/dev/null || -+ # Try the directory containing this script, then the parent directory. -+ ac_confdir=`$as_dirname -- "$0" || - $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || - echo X"$0" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - srcdir=$ac_confdir -- if test ! -r $srcdir/$ac_unique_file; then -+ if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi - else - ac_srcdir_defaulted=no - fi --if test ! -r $srcdir/$ac_unique_file; then -- if test "$ac_srcdir_defaulted" = yes; then -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 -- { (exit 1); exit 1; }; } -- else -- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -- { (exit 1); exit 1; }; } -- fi --fi --(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || -- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 -- { (exit 1); exit 1; }; } --srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` --ac_env_build_alias_set=${build_alias+set} --ac_env_build_alias_value=$build_alias --ac_cv_env_build_alias_set=${build_alias+set} --ac_cv_env_build_alias_value=$build_alias --ac_env_host_alias_set=${host_alias+set} --ac_env_host_alias_value=$host_alias --ac_cv_env_host_alias_set=${host_alias+set} --ac_cv_env_host_alias_value=$host_alias --ac_env_target_alias_set=${target_alias+set} --ac_env_target_alias_value=$target_alias --ac_cv_env_target_alias_set=${target_alias+set} --ac_cv_env_target_alias_value=$target_alias --ac_env_CCAS_set=${CCAS+set} --ac_env_CCAS_value=$CCAS --ac_cv_env_CCAS_set=${CCAS+set} --ac_cv_env_CCAS_value=$CCAS --ac_env_CCASFLAGS_set=${CCASFLAGS+set} --ac_env_CCASFLAGS_value=$CCASFLAGS --ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set} --ac_cv_env_CCASFLAGS_value=$CCASFLAGS --ac_env_CC_set=${CC+set} --ac_env_CC_value=$CC --ac_cv_env_CC_set=${CC+set} --ac_cv_env_CC_value=$CC --ac_env_CFLAGS_set=${CFLAGS+set} --ac_env_CFLAGS_value=$CFLAGS --ac_cv_env_CFLAGS_set=${CFLAGS+set} --ac_cv_env_CFLAGS_value=$CFLAGS --ac_env_LDFLAGS_set=${LDFLAGS+set} --ac_env_LDFLAGS_value=$LDFLAGS --ac_cv_env_LDFLAGS_set=${LDFLAGS+set} --ac_cv_env_LDFLAGS_value=$LDFLAGS --ac_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_env_CPPFLAGS_value=$CPPFLAGS --ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} --ac_cv_env_CPPFLAGS_value=$CPPFLAGS --ac_env_CPP_set=${CPP+set} --ac_env_CPP_value=$CPP --ac_cv_env_CPP_set=${CPP+set} --ac_cv_env_CPP_value=$CPP -+if test ! -r "$srcdir/$ac_unique_file"; then -+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -+ac_abs_confdir=`( -+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 -+ { (exit 1); exit 1; }; } -+ pwd)` -+# When building in place, set srcdir=. -+if test "$ac_abs_confdir" = "$ac_pwd"; then -+ srcdir=. -+fi -+# Remove unnecessary trailing slashes from srcdir. -+# Double slashes in file names in object file debugging info -+# mess up M-x gdb in Emacs. -+case $srcdir in -+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -+esac -+for ac_var in $ac_precious_vars; do -+ eval ac_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_env_${ac_var}_value=\$${ac_var} -+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_cv_env_${ac_var}_value=\$${ac_var} -+done - - # - # Report the --help message. -@@ -979,9 +1458,6 @@ - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - --_ACEOF -- -- cat <<_ACEOF - Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] -@@ -999,15 +1475,22 @@ - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] -- --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] -- --infodir=DIR info documentation [PREFIX/info] -- --mandir=DIR man documentation [PREFIX/man] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] - _ACEOF - - cat <<\_ACEOF -@@ -1044,10 +1527,8 @@ - --enable-dependency-tracking do not reject slow dependency extractors - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer -- --enable-shared[=PKGS] -- build shared libraries [default=yes] -- --enable-static[=PKGS] -- build static libraries [default=yes] -+ --enable-shared[=PKGS] build shared libraries [default=yes] -+ --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) -@@ -1066,128 +1547,95 @@ - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> -- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have -- headers in a nonstandard directory <include dir> -+ LIBS libraries to pass to the linker, e.g. -l<library> -+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if -+ you have headers in a nonstandard directory <include dir> - CPP C preprocessor - - Use these variables to override the choices made by `configure' or to help - it to find libraries and programs with nonstandard names/locations. - - _ACEOF -+ac_status=$? - fi - - if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. -- ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -- test -d $ac_dir || continue -+ test -d "$ac_dir" || continue - ac_builddir=. - --if test "$ac_dir" != .; then -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -- --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; - esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - -- cd $ac_dir -- # Check for guested configure; otherwise get Cygnus style configure. -- if test -f $ac_srcdir/configure.gnu; then -- echo -- $SHELL $ac_srcdir/configure.gnu --help=recursive -- elif test -f $ac_srcdir/configure; then -- echo -- $SHELL $ac_srcdir/configure --help=recursive -- elif test -f $ac_srcdir/configure.ac || -- test -f $ac_srcdir/configure.in; then -- echo -- $ac_configure --help -+ cd "$ac_dir" || { ac_status=$?; continue; } -+ # Check for guested configure. -+ if test -f "$ac_srcdir/configure.gnu"; then -+ echo && -+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive -+ elif test -f "$ac_srcdir/configure"; then -+ echo && -+ $SHELL "$ac_srcdir/configure" --help=recursive - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -- fi -- cd $ac_popdir -+ fi || ac_status=$? -+ cd "$ac_pwd" || { ac_status=$?; break; } - done - fi - --test -n "$ac_init_help" && exit 0 -+test -n "$ac_init_help" && exit $ac_status - if $ac_init_version; then - cat <<\_ACEOF - newlib configure 1.17.0 --generated by GNU Autoconf 2.59 -+generated by GNU Autoconf 2.61 - --Copyright (C) 2003 Free Software Foundation, Inc. -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - This configure script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it. - _ACEOF -- exit 0 -+ exit - fi --exec 5>config.log --cat >&5 <<_ACEOF -+cat >config.log <<_ACEOF - This file contains any messages produced by compilers while - running configure, to aid debugging if configure makes a mistake. - - It was created by newlib $as_me 1.17.0, which was --generated by GNU Autoconf 2.59. Invocation command line was -+generated by GNU Autoconf 2.61. Invocation command line was - - $ $0 $@ - - _ACEOF -+exec 5>>config.log - { - cat <<_ASUNAME - ## --------- ## -@@ -1206,7 +1654,7 @@ - /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` - /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` - /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` --hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` - /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` - /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` - /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -@@ -1220,6 +1668,7 @@ - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" - done -+IFS=$as_save_IFS - - } >&5 - -@@ -1241,7 +1690,6 @@ - ac_configure_args= - ac_configure_args0= - ac_configure_args1= --ac_sep= - ac_must_keep_next=false - for ac_pass in 1 2 - do -@@ -1252,7 +1700,7 @@ - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -+ *\'*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in -@@ -1274,9 +1722,7 @@ - -* ) ac_must_keep_next=true ;; - esac - fi -- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" -- # Get rid of the leading space. -- ac_sep=" " -+ ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -@@ -1287,8 +1733,8 @@ - # When interrupted or exit'd, cleanup temporary files, and complete - # config.log. We remove comments because anyway the quotes in there - # would cause problems or look ugly. --# WARNING: Be sure not to use single quotes in there, as some shells, --# such as our DU 5.0 friend, will then `close' the trap. -+# WARNING: Use '\'' to represent an apostrophe within the trap. -+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. - trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { -@@ -1301,20 +1747,34 @@ - _ASBOX - echo - # The following way of writing the cache mishandles newlines in values, --{ -+( -+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done - (set) 2>&1 | -- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) - sed -n \ -- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; -- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" -- ;; -+ "s/'\''/'\''\\\\'\'''\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" -+ ;; #( - *) -- sed -n \ -- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; -- esac; --} -+ esac | -+ sort -+) - echo - - cat <<\_ASBOX -@@ -1325,22 +1785,28 @@ - echo - for ac_var in $ac_subst_vars - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX --## ------------- ## --## Output files. ## --## ------------- ## -+## ------------------- ## -+## File substitutions. ## -+## ------------------- ## - _ASBOX - echo - for ac_var in $ac_subst_files - do -- eval ac_val=$`echo $ac_var` -- echo "$ac_var='"'"'$ac_val'"'"'" -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi -@@ -1352,26 +1818,24 @@ - ## ----------- ## - _ASBOX - echo -- sed "/^$/d" confdefs.h | sort -+ cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 -- rm -f core *.core && -- rm -rf conftest* confdefs* conf$$* $ac_clean_files && -+ rm -f core *.core core.conftest.* && -+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -- ' 0 -+' 0 - for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal - done - ac_signal=0 - - # confdefs.h avoids OS command line length limits that DEFS can exceed. --rm -rf conftest* confdefs.h --# AIX cpp loses on an empty file, so make sure it contains at least a newline. --echo >confdefs.h -+rm -f -r conftest* confdefs.h - - # Predefined preprocessor variables. - -@@ -1402,14 +1866,17 @@ - - # Let the site file select an alternate cache file if it wants to. - # Prefer explicitly selected file to automatically selected ones. --if test -z "$CONFIG_SITE"; then -- if test "x$prefix" != xNONE; then -- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" -- else -- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" -- fi -+if test -n "$CONFIG_SITE"; then -+ set x "$CONFIG_SITE" -+elif test "x$prefix" != xNONE; then -+ set x "$prefix/share/config.site" "$prefix/etc/config.site" -+else -+ set x "$ac_default_prefix/share/config.site" \ -+ "$ac_default_prefix/etc/config.site" - fi --for ac_site_file in $CONFIG_SITE; do -+shift -+for ac_site_file -+do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 - echo "$as_me: loading site script $ac_site_file" >&6;} -@@ -1425,8 +1892,8 @@ - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 - echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in -- [\\/]* | ?:[\\/]* ) . $cache_file;; -- *) . ./$cache_file;; -+ [\\/]* | ?:[\\/]* ) . "$cache_file";; -+ *) . "./$cache_file";; - esac - fi - else -@@ -1438,12 +1905,11 @@ - # Check that the precious variables saved in the cache have kept the same - # value. - ac_cache_corrupted=false --for ac_var in `(set) 2>&1 | -- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do -+for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set -- eval ac_old_val="\$ac_cv_env_${ac_var}_value" -- eval ac_new_val="\$ac_env_${ac_var}_value" -+ eval ac_old_val=\$ac_cv_env_${ac_var}_value -+ eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -@@ -1468,8 +1934,7 @@ - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in -- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) -- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in -@@ -1486,12 +1951,6 @@ - { (exit 1); exit 1; }; } - fi - --ac_ext=c --ac_cpp='$CPP $CPPFLAGS' --ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' --ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' --ac_compiler_gnu=$ac_cv_c_compiler_gnu -- - - - -@@ -1516,67 +1975,92 @@ - - - -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - ac_aux_dir= --for ac_dir in ../../.. $srcdir/../../..; do -- if test -f $ac_dir/install-sh; then -+for ac_dir in ../../.. "$srcdir"/../../..; do -+ if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break -- elif test -f $ac_dir/install.sh; then -+ elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break -- elif test -f $ac_dir/shtool; then -+ elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi - done - if test -z "$ac_aux_dir"; then -- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5 --echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;} -+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5 -+echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;} - { (exit 1); exit 1; }; } - fi --ac_config_guess="$SHELL $ac_aux_dir/config.guess" --ac_config_sub="$SHELL $ac_aux_dir/config.sub" --ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. -+ -+# These three variables are undocumented and unsupported, -+# and are intended to be withdrawn in a future Autoconf release. -+# They can cause serious problems if a builder's source tree is in a directory -+# whose full name contains unusual characters. -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -+ - - - - # Make sure we can run config.sub. --$ac_config_sub sun4 >/dev/null 2>&1 || -- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 --echo "$as_me: error: cannot run $ac_config_sub" >&2;} -+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } - --echo "$as_me:$LINENO: checking build system type" >&5 --echo $ECHO_N "checking build system type... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking build system type" >&5 -+echo $ECHO_N "checking build system type... $ECHO_C" >&6; } - if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_cv_build_alias=$build_alias --test -z "$ac_cv_build_alias" && -- ac_cv_build_alias=`$ac_config_guess` --test -z "$ac_cv_build_alias" && -+ ac_build_alias=$build_alias -+test "x$ac_build_alias" = x && -+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -+test "x$ac_build_alias" = x && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 - echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } --ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} -+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - - fi --echo "$as_me:$LINENO: result: $ac_cv_build" >&5 --echo "${ECHO_T}$ac_cv_build" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -+echo "${ECHO_T}$ac_cv_build" >&6; } -+case $ac_cv_build in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -+echo "$as_me: error: invalid value of canonical build" >&2;} -+ { (exit 1); exit 1; }; };; -+esac - build=$ac_cv_build --build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` --build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` --build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_build -+shift -+build_cpu=$1 -+build_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+build_os=$* -+IFS=$ac_save_IFS -+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - - am__api_version="1.9" -@@ -1593,8 +2077,8 @@ - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } - if test -z "$INSTALL"; then - if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -@@ -1616,7 +2100,7 @@ - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. -@@ -1635,21 +2119,22 @@ - ;; - esac - done -+IFS=$as_save_IFS - - - fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else -- # As a last resort, use the slow shell script. We don't cache a -- # path for INSTALL within a source directory, because that will -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is -- # removed, or if the path is relative. -+ # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. -@@ -1659,8 +2144,8 @@ - - test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - --echo "$as_me:$LINENO: checking whether build environment is sane" >&5 --echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } - # Just in case - sleep 1 - echo timestamp > conftest.file -@@ -1702,20 +2187,20 @@ - Check your system clock" >&2;} - { (exit 1); exit 1; }; } - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - test "$program_prefix" != NONE && -- program_transform_name="s,^,$program_prefix,;$program_transform_name" -+ program_transform_name="s&^&$program_prefix&;$program_transform_name" - # Use a double $ so make ignores it. - test "$program_suffix" != NONE && -- program_transform_name="s,\$,$program_suffix,;$program_transform_name" -+ program_transform_name="s&\$&$program_suffix&;$program_transform_name" - # Double any \ or $. echo might interpret backslashes. - # By default was `s,x,x', remove it if useless. - cat <<\_ACEOF >conftest.sed - s/[\\$]/&&/g;s/;s,x,x,$// - _ACEOF - program_transform_name=`echo $program_transform_name | sed -f conftest.sed` --rm conftest.sed -+rm -f conftest.sed - - # expand $ac_aux_dir to an absolute path - am_aux_dir=`cd $ac_aux_dir && pwd` -@@ -1767,8 +2252,8 @@ - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -1781,54 +2266,57 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AWK=$ac_cv_prog_AWK - if test -n "$AWK"; then -- echo "$as_me:$LINENO: result: $AWK" >&5 --echo "${ECHO_T}$AWK" >&6 -+ { echo "$as_me:$LINENO: result: $AWK" >&5 -+echo "${ECHO_T}$AWK" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$AWK" && break - done - --echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 --echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 --set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` --if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then -+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - cat >conftest.make <<\_ACEOF -+SHELL = /bin/sh - all: -- @echo 'ac_maketemp="$(MAKE)"' -+ @echo '@@@%%%=$(MAKE)=@@@%%%' - _ACEOF - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. --eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` --if test -n "$ac_maketemp"; then -- eval ac_cv_prog_make_${ac_make}_set=yes --else -- eval ac_cv_prog_make_${ac_make}_set=no --fi -+case `${MAKE-make} -f conftest.make 2>/dev/null` in -+ *@@@%%%=?*=@@@%%%*) -+ eval ac_cv_prog_make_${ac_make}_set=yes;; -+ *) -+ eval ac_cv_prog_make_${ac_make}_set=no;; -+esac - rm -f conftest.make - fi --if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - SET_MAKE= - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" - fi - -@@ -1843,7 +2331,7 @@ - - DEPDIR="${am__leading_dot}deps" - -- ac_config_commands="$ac_config_commands depfiles" -+ac_config_commands="$ac_config_commands depfiles" - - - am_make=${MAKE-make} -@@ -1853,8 +2341,8 @@ - .PHONY: am__doit - END - # If we don't find an include directive, just comment out the code. --echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 --echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } - am__include="#" - am__quote= - _am_result=none -@@ -1881,15 +2369,15 @@ - fi - - --echo "$as_me:$LINENO: result: $_am_result" >&5 --echo "${ECHO_T}$_am_result" >&6 -+{ echo "$as_me:$LINENO: result: $_am_result" >&5 -+echo "${ECHO_T}$_am_result" >&6; } - rm -f confinc confmf - --# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -+# Check whether --enable-dependency-tracking was given. - if test "${enable_dependency_tracking+set}" = set; then -- enableval="$enable_dependency_tracking" -+ enableval=$enable_dependency_tracking; -+fi - --fi; - if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -@@ -1907,10 +2395,9 @@ - - - --# Check whether --enable-multilib or --disable-multilib was given. -+# Check whether --enable-multilib was given. - if test "${enable_multilib+set}" = set; then -- enableval="$enable_multilib" -- case "${enableval}" in -+ enableval=$enable_multilib; case "${enableval}" in - yes) multilib=yes ;; - no) multilib=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 -@@ -1919,11 +2406,11 @@ - esac - else - multilib=yes --fi; --# Check whether --enable-target-optspace or --disable-target-optspace was given. -+fi -+ -+# Check whether --enable-target-optspace was given. - if test "${enable_target_optspace+set}" = set; then -- enableval="$enable_target_optspace" -- case "${enableval}" in -+ enableval=$enable_target_optspace; case "${enableval}" in - yes) target_optspace=yes ;; - no) target_optspace=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 -@@ -1932,11 +2419,11 @@ - esac - else - target_optspace= --fi; --# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. -+fi -+ -+# Check whether --enable-malloc-debugging was given. - if test "${enable_malloc_debugging+set}" = set; then -- enableval="$enable_malloc_debugging" -- case "${enableval}" in -+ enableval=$enable_malloc_debugging; case "${enableval}" in - yes) malloc_debugging=yes ;; - no) malloc_debugging=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 -@@ -1945,11 +2432,11 @@ - esac - else - malloc_debugging= --fi; --# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. -+fi -+ -+# Check whether --enable-newlib-multithread was given. - if test "${enable_newlib_multithread+set}" = set; then -- enableval="$enable_newlib_multithread" -- case "${enableval}" in -+ enableval=$enable_newlib_multithread; case "${enableval}" in - yes) newlib_multithread=yes ;; - no) newlib_multithread=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 -@@ -1958,11 +2445,11 @@ - esac - else - newlib_multithread=yes --fi; --# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. -+fi -+ -+# Check whether --enable-newlib-iconv was given. - if test "${enable_newlib_iconv+set}" = set; then -- enableval="$enable_newlib_iconv" -- if test "${newlib_iconv+set}" != set; then -+ enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then - case "${enableval}" in - yes) newlib_iconv=yes ;; - no) newlib_iconv=no ;; -@@ -1973,11 +2460,11 @@ - fi - else - newlib_iconv=${newlib_iconv} --fi; --# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. -+fi -+ -+# Check whether --enable-newlib-elix-level was given. - if test "${enable_newlib_elix_level+set}" = set; then -- enableval="$enable_newlib_elix_level" -- case "${enableval}" in -+ enableval=$enable_newlib_elix_level; case "${enableval}" in - 0) newlib_elix_level=0 ;; - 1) newlib_elix_level=1 ;; - 2) newlib_elix_level=2 ;; -@@ -1989,11 +2476,11 @@ - esac - else - newlib_elix_level=0 --fi; --# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. -+fi -+ -+# Check whether --enable-newlib-io-float was given. - if test "${enable_newlib_io_float+set}" = set; then -- enableval="$enable_newlib_io_float" -- case "${enableval}" in -+ enableval=$enable_newlib_io_float; case "${enableval}" in - yes) newlib_io_float=yes ;; - no) newlib_io_float=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 -@@ -2002,11 +2489,11 @@ - esac - else - newlib_io_float=yes --fi; --# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. -+fi -+ -+# Check whether --enable-newlib-supplied-syscalls was given. - if test "${enable_newlib_supplied_syscalls+set}" = set; then -- enableval="$enable_newlib_supplied_syscalls" -- case "${enableval}" in -+ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in - yes) newlib_may_supply_syscalls=yes ;; - no) newlib_may_supply_syscalls=no ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 -@@ -2015,7 +2502,8 @@ - esac - else - newlib_may_supply_syscalls=yes --fi; -+fi -+ - - - if test x${newlib_may_supply_syscalls} = xyes; then -@@ -2041,26 +2529,41 @@ - fi - - --echo "$as_me:$LINENO: checking host system type" >&5 --echo $ECHO_N "checking host system type... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking host system type" >&5 -+echo $ECHO_N "checking host system type... $ECHO_C" >&6; } - if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_cv_host_alias=$host_alias --test -z "$ac_cv_host_alias" && -- ac_cv_host_alias=$ac_cv_build_alias --ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || -- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 --echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} -+ if test "x$host_alias" = x; then -+ ac_cv_host=$ac_cv_build -+else -+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } -+fi - - fi --echo "$as_me:$LINENO: result: $ac_cv_host" >&5 --echo "${ECHO_T}$ac_cv_host" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -+echo "${ECHO_T}$ac_cv_host" >&6; } -+case $ac_cv_host in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -+echo "$as_me: error: invalid value of canonical host" >&2;} -+ { (exit 1); exit 1; }; };; -+esac - host=$ac_cv_host --host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` --host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` --host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_host -+shift -+host_cpu=$1 -+host_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+host_os=$* -+IFS=$ac_save_IFS -+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - -@@ -2113,8 +2616,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. - set dummy ${ac_tool_prefix}strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2127,32 +2630,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - STRIP=$ac_cv_prog_STRIP - if test -n "$STRIP"; then -- echo "$as_me:$LINENO: result: $STRIP" >&5 --echo "${ECHO_T}$STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $STRIP" >&5 -+echo "${ECHO_T}$STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. - set dummy strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2165,27 +2670,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" - fi - fi - ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP - if test -n "$ac_ct_STRIP"; then -- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 --echo "${ECHO_T}$ac_ct_STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -+echo "${ECHO_T}$ac_ct_STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- STRIP=$ac_ct_STRIP -+ if test "x$ac_ct_STRIP" = x; then -+ STRIP=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ STRIP=$ac_ct_STRIP -+ fi - else - STRIP="$ac_cv_prog_STRIP" - fi -@@ -2220,8 +2739,8 @@ - - # Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2234,30 +2753,32 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -+ - depcc="$CC" am_compiler_list= - --echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 --echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } - if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2346,8 +2867,8 @@ - fi - - fi --echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 --echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } - CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -@@ -2366,8 +2887,8 @@ - if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2381,7 +2902,7 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue -@@ -2392,6 +2913,7 @@ - fi - done - done -+IFS=$as_save_IFS - - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. -@@ -2409,20 +2931,21 @@ - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 - echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} - { (exit 1); exit 1; }; } - fi - --echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 --echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 -+echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; } - if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2442,8 +2965,8 @@ - ac_cv_c_compiler_gnu=no - fi - fi --echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } - - if test $ac_cv_c_compiler_gnu = yes; then - GCC=yes -@@ -2452,13 +2975,16 @@ - CFLAGS= - ac_test_CFLAGS=${CFLAGS+set} - ac_save_CFLAGS=$CFLAGS --CFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 --echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } - if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- cat >conftest.$ac_ext <<_ACEOF -+ ac_save_c_werror_flag=$ac_c_werror_flag -+ ac_c_werror_flag=yes -+ ac_cv_prog_cc_g=no -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext -@@ -2474,38 +3000,118 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_g=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ CFLAGS="" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ : -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_c_werror_flag=$ac_save_c_werror_flag -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_prog_cc_g=no -+ -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_c_werror_flag=$ac_save_c_werror_flag - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } - if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS - elif test $ac_cv_prog_cc_g = yes; then -@@ -2537,8 +3143,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. - set dummy ${ac_tool_prefix}as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2551,32 +3157,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AS="${ac_tool_prefix}as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AS=$ac_cv_prog_AS - if test -n "$AS"; then -- echo "$as_me:$LINENO: result: $AS" >&5 --echo "${ECHO_T}$AS" >&6 -+ { echo "$as_me:$LINENO: result: $AS" >&5 -+echo "${ECHO_T}$AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. - set dummy as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2589,26 +3197,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AS="as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_AS=$ac_cv_prog_ac_ct_AS - if test -n "$ac_ct_AS"; then -- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 --echo "${ECHO_T}$ac_ct_AS" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -+echo "${ECHO_T}$ac_ct_AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AS=$ac_ct_AS -+ if test "x$ac_ct_AS" = x; then -+ AS="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AS=$ac_ct_AS -+ fi - else - AS="$ac_cv_prog_AS" - fi -@@ -2616,8 +3239,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. - set dummy ${ac_tool_prefix}ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2630,32 +3253,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AR=$ac_cv_prog_AR - if test -n "$AR"; then -- echo "$as_me:$LINENO: result: $AR" >&5 --echo "${ECHO_T}$AR" >&6 -+ { echo "$as_me:$LINENO: result: $AR" >&5 -+echo "${ECHO_T}$AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. - set dummy ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2668,26 +3293,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_AR=$ac_cv_prog_ac_ct_AR - if test -n "$ac_ct_AR"; then -- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 --echo "${ECHO_T}$ac_ct_AR" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -+echo "${ECHO_T}$ac_ct_AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AR=$ac_ct_AR -+ if test "x$ac_ct_AR" = x; then -+ AR="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AR=$ac_ct_AR -+ fi - else - AR="$ac_cv_prog_AR" - fi -@@ -2695,8 +3335,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. - set dummy ${ac_tool_prefix}ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2709,32 +3349,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - RANLIB=$ac_cv_prog_RANLIB - if test -n "$RANLIB"; then -- echo "$as_me:$LINENO: result: $RANLIB" >&5 --echo "${ECHO_T}$RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $RANLIB" >&5 -+echo "${ECHO_T}$RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. - set dummy ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2747,27 +3389,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" - fi - fi - ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB - if test -n "$ac_ct_RANLIB"; then -- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 --echo "${ECHO_T}$ac_ct_RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -+echo "${ECHO_T}$ac_ct_RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- RANLIB=$ac_ct_RANLIB -+ if test "x$ac_ct_RANLIB" = x; then -+ RANLIB=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ RANLIB=$ac_ct_RANLIB -+ fi - else - RANLIB="$ac_cv_prog_RANLIB" - fi -@@ -2775,8 +3431,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. - set dummy ${ac_tool_prefix}readelf; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_READELF+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2789,32 +3445,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_READELF="${ac_tool_prefix}readelf" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - READELF=$ac_cv_prog_READELF - if test -n "$READELF"; then -- echo "$as_me:$LINENO: result: $READELF" >&5 --echo "${ECHO_T}$READELF" >&6 -+ { echo "$as_me:$LINENO: result: $READELF" >&5 -+echo "${ECHO_T}$READELF" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_READELF"; then - ac_ct_READELF=$READELF - # Extract the first word of "readelf", so it can be a program name with args. - set dummy readelf; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -2827,27 +3485,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_READELF="readelf" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":" - fi - fi - ac_ct_READELF=$ac_cv_prog_ac_ct_READELF - if test -n "$ac_ct_READELF"; then -- echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 --echo "${ECHO_T}$ac_ct_READELF" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 -+echo "${ECHO_T}$ac_ct_READELF" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- READELF=$ac_ct_READELF -+ if test "x$ac_ct_READELF" = x; then -+ READELF=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ READELF=$ac_ct_READELF -+ fi - else - READELF="$ac_cv_prog_READELF" - fi -@@ -2866,8 +3538,8 @@ - # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" - # OS/2's system install, which has a completely different semantic - # ./install, which can be erroneously created by make from ./install.sh. --echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 --echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } - if test -z "$INSTALL"; then - if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -@@ -2889,7 +3561,7 @@ - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. -@@ -2908,21 +3580,22 @@ - ;; - esac - done -+IFS=$as_save_IFS - - - fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else -- # As a last resort, use the slow shell script. We don't cache a -- # path for INSTALL within a source directory, because that will -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is -- # removed, or if the path is relative. -+ # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi - fi --echo "$as_me:$LINENO: result: $INSTALL" >&5 --echo "${ECHO_T}$INSTALL" >&6 -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } - - # Use test -z because SunOS4 sh mishandles braces in ${var-val}. - # It thinks the first close brace ends the variable substitution. -@@ -2936,17 +3609,17 @@ - # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */ - ac_given_INSTALL=$INSTALL - --echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 --echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 -- # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. -+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } -+ # Check whether --enable-maintainer-mode was given. - if test "${enable_maintainer_mode+set}" = set; then -- enableval="$enable_maintainer_mode" -- USE_MAINTAINER_MODE=$enableval -+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval - else - USE_MAINTAINER_MODE=no --fi; -- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 --echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 -+fi -+ -+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } - - - if test $USE_MAINTAINER_MODE = yes; then -@@ -3066,64 +3739,89 @@ - - - --echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 --echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 --if test "${lt_cv_path_SED+set}" = set; then -+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } -+if test "${ac_cv_path_SED+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ -+ for ac_i in 1 2 3 4 5 6 7; do -+ ac_script="$ac_script$as_nl$ac_script" -+ done -+ echo "$ac_script" | sed 99q >conftest.sed -+ $as_unset ac_script || ac_script= -+ # Extract the first word of "sed gsed" to use in msg output -+if test -z "$SED"; then -+set dummy sed gsed; ac_prog_name=$2 -+if test "${ac_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- # Loop through the user's path and test for sed and gsed. --# Then use that list of sed's as ones to test for truncation. -+ ac_path_SED_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. -- for lt_ac_prog in sed gsed; do -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then -- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" -- fi -- done -- done --done --IFS=$as_save_IFS --lt_ac_max=0 --lt_ac_count=0 --# Add /usr/xpg4/bin/sed as it is typically found on Solaris --# along with /bin/sed that truncates output. --for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do -- test ! -f $lt_ac_sed && continue -- cat /dev/null > conftest.in -- lt_ac_count=0 -- echo $ECHO_N "0123456789$ECHO_C" >conftest.in -- # Check for GNU sed and select it if it is found. -- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then -- lt_cv_path_SED=$lt_ac_sed -- break -- fi -- while true; do -- cat conftest.in conftest.in >conftest.tmp -- mv conftest.tmp conftest.in -- cp conftest.in conftest.nl -- echo >>conftest.nl -- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break -- cmp -s conftest.out conftest.nl || break -- # 10000 chars as input seems more than enough -- test $lt_ac_count -gt 10 && break -- lt_ac_count=`expr $lt_ac_count + 1` -- if test $lt_ac_count -gt $lt_ac_max; then -- lt_ac_max=$lt_ac_count -- lt_cv_path_SED=$lt_ac_sed -+ for ac_prog in sed gsed; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -+ # Check for GNU ac_path_SED and select it if it is found. -+ # Check for GNU $ac_path_SED -+case `"$ac_path_SED" --version 2>&1` in -+*GNU*) -+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo '' >> "conftest.nl" -+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_SED_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_SED="$ac_path_SED" -+ ac_path_SED_max=$ac_count - fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ -+ $ac_path_SED_found && break 3 - done - done - -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ -+SED="$ac_cv_path_SED" -+if test -z "$SED"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} -+ { (exit 1); exit 1; }; } - fi - --SED=$lt_cv_path_SED -+else -+ ac_cv_path_SED=$SED -+fi - --echo "$as_me:$LINENO: result: $SED" >&5 --echo "${ECHO_T}$SED" >&6 -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 -+echo "${ECHO_T}$ac_cv_path_SED" >&6; } -+ SED="$ac_cv_path_SED" -+ rm -f conftest.sed - - test -z "$SED" && SED=sed - Xsed="$SED -e 1s/^X//" -@@ -3146,8 +3844,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. - set dummy ${ac_tool_prefix}as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3160,32 +3858,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AS="${ac_tool_prefix}as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AS=$ac_cv_prog_AS - if test -n "$AS"; then -- echo "$as_me:$LINENO: result: $AS" >&5 --echo "${ECHO_T}$AS" >&6 -+ { echo "$as_me:$LINENO: result: $AS" >&5 -+echo "${ECHO_T}$AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. - set dummy as; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3198,27 +3898,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AS="as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false" - fi - fi - ac_ct_AS=$ac_cv_prog_ac_ct_AS - if test -n "$ac_ct_AS"; then -- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 --echo "${ECHO_T}$ac_ct_AS" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -+echo "${ECHO_T}$ac_ct_AS" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AS=$ac_ct_AS -+ if test "x$ac_ct_AS" = x; then -+ AS="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AS=$ac_ct_AS -+ fi - else - AS="$ac_cv_prog_AS" - fi -@@ -3226,8 +3940,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. - set dummy ${ac_tool_prefix}dlltool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_DLLTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3240,32 +3954,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - DLLTOOL=$ac_cv_prog_DLLTOOL - if test -n "$DLLTOOL"; then -- echo "$as_me:$LINENO: result: $DLLTOOL" >&5 --echo "${ECHO_T}$DLLTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 -+echo "${ECHO_T}$DLLTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. - set dummy dlltool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3278,27 +3994,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false" - fi - fi - ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL - if test -n "$ac_ct_DLLTOOL"; then -- echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 --echo "${ECHO_T}$ac_ct_DLLTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 -+echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- DLLTOOL=$ac_ct_DLLTOOL -+ if test "x$ac_ct_DLLTOOL" = x; then -+ DLLTOOL="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ DLLTOOL=$ac_ct_DLLTOOL -+ fi - else - DLLTOOL="$ac_cv_prog_DLLTOOL" - fi -@@ -3306,8 +4036,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. - set dummy ${ac_tool_prefix}objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3320,32 +4050,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OBJDUMP=$ac_cv_prog_OBJDUMP - if test -n "$OBJDUMP"; then -- echo "$as_me:$LINENO: result: $OBJDUMP" >&5 --echo "${ECHO_T}$OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -+echo "${ECHO_T}$OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. - set dummy objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3358,27 +4090,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" - fi - fi - ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP - if test -n "$ac_ct_OBJDUMP"; then -- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 --echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OBJDUMP=$ac_ct_OBJDUMP -+ if test "x$ac_ct_OBJDUMP" = x; then -+ OBJDUMP="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OBJDUMP=$ac_ct_OBJDUMP -+ fi - else - OBJDUMP="$ac_cv_prog_OBJDUMP" - fi -@@ -3439,8 +4185,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. - set dummy ${ac_tool_prefix}gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3453,32 +4199,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. - set dummy gcc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3491,36 +4239,51 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - else - CC="$ac_cv_prog_CC" - fi - - if test -z "$CC"; then -- if test -n "$ac_tool_prefix"; then -- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -+ if test -n "$ac_tool_prefix"; then -+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. - set dummy ${ac_tool_prefix}cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3533,98 +4296,59 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ -+ fi - fi --if test -z "$ac_cv_prog_CC"; then -- ac_ct_CC=$CC -+if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. - set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_ac_ct_CC+set}" = set; then -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -+if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- if test -n "$ac_ct_CC"; then -- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -+ if test -n "$CC"; then -+ ac_cv_prog_CC="$CC" # Let the user override the test. - else -+ ac_prog_rejected=no - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR - for as_dir in $PATH - do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- ac_cv_prog_ac_ct_CC="cc" -- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 -- break 2 -- fi --done --done -- --fi --fi --ac_ct_CC=$ac_cv_prog_ac_ct_CC --if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 --else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 --fi -- -- CC=$ac_ct_CC --else -- CC="$ac_cv_prog_CC" --fi -- --fi --if test -z "$CC"; then -- # Extract the first word of "cc", so it can be a program name with args. --set dummy cc; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 --if test "${ac_cv_prog_CC+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 --else -- if test -n "$CC"; then -- ac_cv_prog_CC="$CC" # Let the user override the test. --else -- ac_prog_rejected=no --as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -- ac_prog_rejected=yes -- continue -- fi -- ac_cv_prog_CC="cc" -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then -+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then -+ ac_prog_rejected=yes -+ continue -+ fi -+ ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. -@@ -3642,22 +4366,23 @@ - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3670,36 +4395,38 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - CC=$ac_cv_prog_CC - if test -n "$CC"; then -- echo "$as_me:$LINENO: result: $CC" >&5 --echo "${ECHO_T}$CC" >&6 -+ { echo "$as_me:$LINENO: result: $CC" >&5 -+echo "${ECHO_T}$CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$CC" && break - done - fi - if test -z "$CC"; then - ac_ct_CC=$CC -- for ac_prog in cl -+ for ac_prog in cl.exe - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3712,29 +4439,45 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_CC=$ac_cv_prog_ac_ct_CC - if test -n "$ac_ct_CC"; then -- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 --echo "${ECHO_T}$ac_ct_CC" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -+echo "${ECHO_T}$ac_ct_CC" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$ac_ct_CC" && break - done - -- CC=$ac_ct_CC -+ if test "x$ac_ct_CC" = x; then -+ CC="" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ CC=$ac_ct_CC -+ fi - fi - - fi -@@ -3747,21 +4490,35 @@ - { (exit 1); exit 1; }; } - - # Provide some information about the compiler. --echo "$as_me:$LINENO:" \ -- "checking for C compiler version" >&5 -+echo "$as_me:$LINENO: checking for C compiler version" >&5 - ac_compiler=`set X $ac_compile; echo $2` --{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 -- (eval $ac_compiler --version </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler --version >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 -- (eval $ac_compiler -v </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler -v >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } --{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 -- (eval $ac_compiler -V </dev/null >&5) 2>&5 -+{ (ac_try="$ac_compiler -V >&5" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -@@ -3786,47 +4543,77 @@ - # Try to create an executable without -o first, disregard a.out. - # It will help us diagnose broken compilers, and finding out an intuition - # of exeext. --echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 --echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } - ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` --if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 -- (eval $ac_link_default) 2>&5 -+# -+# List of possible output files, starting from the most likely. -+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) -+# only as a last resort. b.out is created by i960 compilers. -+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' -+# -+# The IRIX 6 linker writes into existing files which may not be -+# executable, retaining their permissions. Remove them first so a -+# subsequent execution test works. -+ac_rmfiles= -+for ac_file in $ac_files -+do -+ case $ac_file in -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; -+ * ) ac_rmfiles="$ac_rmfiles $ac_file";; -+ esac -+done -+rm -f $ac_rmfiles -+ -+if { (ac_try="$ac_link_default" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link_default") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -- # Find the output, starting from the most likely. This scheme is --# not robust to junk in `.', hence go to wildcards (a.*) only as a last --# resort. -- --# Be careful to initialize this variable, since it used to be cached. --# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. --ac_cv_exeext= --# b.out is created by i960 compilers. --for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -+# in a Makefile. We should not override ac_cv_exeext if it was cached, -+# so that the user can short-circuit this test for compilers unknown to -+# Autoconf. -+for ac_file in $ac_files '' - do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) -- ;; -- conftest.$ac_ext ) -- # This is the source file. -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) -- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- # FIXME: I believe we export ac_cv_exeext for Libtool, -- # but it would be cool to find out if it's true. Does anybody -- # maintain Libtool? --akim. -- export ac_cv_exeext -+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; -+ then :; else -+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -+ fi -+ # We set ac_cv_exeext here because the later test for it is not -+ # safe: cross compilers may not add the suffix if given an `-o' -+ # argument, so we may need to know it at that point already. -+ # Even if this section looks crufty: it has the advantage of -+ # actually working. - break;; - * ) - break;; - esac - done -+test "$ac_cv_exeext" = no && ac_cv_exeext= -+ - else -+ ac_file='' -+fi -+ -+{ echo "$as_me:$LINENO: result: $ac_file" >&5 -+echo "${ECHO_T}$ac_file" >&6; } -+if test -z "$ac_file"; then - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -@@ -3838,19 +4625,21 @@ - fi - - ac_exeext=$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_file" >&5 --echo "${ECHO_T}$ac_file" >&6 - --# Check the compiler produces executables we can run. If not, either -+# Check that the compiler produces executables we can run. If not, either - # the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether the C compiler works" >&5 --echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } - # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 - # If not cross compiling, check that we can run a simple program. - if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ { (case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -@@ -3869,22 +4658,27 @@ - fi - fi - fi --echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+{ echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - - rm -f a.out a.exe conftest$ac_cv_exeext b.out - ac_clean_files=$ac_clean_files_save --# Check the compiler produces executables we can run. If not, either -+# Check that the compiler produces executables we can run. If not, either - # the compiler is broken, or we cross compile. --echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 --echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 --echo "$as_me:$LINENO: result: $cross_compiling" >&5 --echo "${ECHO_T}$cross_compiling" >&6 -- --echo "$as_me:$LINENO: checking for suffix of executables" >&5 --echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } -+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 -+echo "${ECHO_T}$cross_compiling" >&6; } -+ -+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 -+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -@@ -3895,9 +4689,8 @@ - for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` -- export ac_cv_exeext - break;; - * ) break;; - esac -@@ -3911,14 +4704,14 @@ - fi - - rm -f conftest$ac_cv_exeext --echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 --echo "${ECHO_T}$ac_cv_exeext" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -+echo "${ECHO_T}$ac_cv_exeext" >&6; } - - rm -f conftest.$ac_ext - EXEEXT=$ac_cv_exeext - ac_exeext=$EXEEXT --echo "$as_me:$LINENO: checking for suffix of object files" >&5 --echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 -+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } - if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3938,14 +4731,20 @@ - } - _ACEOF - rm -f conftest.o conftest.obj --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>&5 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then -- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do -+ for ac_file in conftest.o conftest.obj conftest.*; do -+ test -f "$ac_file" || continue; - case $ac_file in -- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; -+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -@@ -3963,12 +4762,12 @@ - - rm -f conftest.$ac_cv_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 --echo "${ECHO_T}$ac_cv_objext" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -+echo "${ECHO_T}$ac_cv_objext" >&6; } - OBJEXT=$ac_cv_objext - ac_objext=$OBJEXT --echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 --echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } - if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -3991,50 +4790,49 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_compiler_gnu=no -+ ac_compiler_gnu=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_c_compiler_gnu=$ac_compiler_gnu - - fi --echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 --echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } - GCC=`test $ac_compiler_gnu = yes && echo yes` - ac_test_CFLAGS=${CFLAGS+set} - ac_save_CFLAGS=$CFLAGS --CFLAGS="-g" --echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 --echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } - if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- cat >conftest.$ac_ext <<_ACEOF -+ ac_save_c_werror_flag=$ac_c_werror_flag -+ ac_c_werror_flag=yes -+ ac_cv_prog_cc_g=no -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext -@@ -4050,38 +4848,118 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_g=yes -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ CFLAGS="" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ : -+else -+ echo "$as_me: failed program was:" >&5 -+sed 's/^/| /' conftest.$ac_ext >&5 -+ -+ ac_c_werror_flag=$ac_save_c_werror_flag -+ CFLAGS="-g" -+ cat >conftest.$ac_ext <<_ACEOF -+/* confdefs.h. */ -+_ACEOF -+cat confdefs.h >>conftest.$ac_ext -+cat >>conftest.$ac_ext <<_ACEOF -+/* end confdefs.h. */ -+ -+int -+main () -+{ -+ -+ ; -+ return 0; -+} -+_ACEOF -+rm -f conftest.$ac_objext -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? -+ grep -v '^ *+' conftest.er1 >conftest.err -+ rm -f conftest.er1 -+ cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_prog_cc_g=no -+ -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+fi -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -+ ac_c_werror_flag=$ac_save_c_werror_flag - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } - if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS - elif test $ac_cv_prog_cc_g = yes; then -@@ -4097,12 +4975,12 @@ - CFLAGS= - fi - fi --echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 --echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 --if test "${ac_cv_prog_cc_stdc+set}" = set; then -+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -+if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- ac_cv_prog_cc_stdc=no -+ ac_cv_prog_cc_c89=no - ac_save_CC=$CC - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -4136,12 +5014,17 @@ - /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated -- as 'x'. The following induces an error, until -std1 is added to get -+ as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something -- that's true only with -std1. */ -+ that's true only with -std. */ - int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters -+ inside strings and character constants. */ -+#define FOO(x) 'x' -+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; -+ - int test (int i, double x); - struct s1 {int (*f) (int a);}; - struct s2 {int (*f) (double a);}; -@@ -4156,205 +5039,57 @@ - return 0; - } - _ACEOF --# Don't try gcc -ansi; that turns off useful extensions and --# breaks some systems' header files. --# AIX -qlanglvl=ansi --# Ultrix and OSF/1 -std1 --# HP-UX 10.20 and later -Ae --# HP-UX older versions -Aa -D_HPUX_SOURCE --# SVR4 -Xc -D__EXTENSIONS__ --for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" - do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- ac_cv_prog_cc_stdc=$ac_arg --break -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then -+ ac_cv_prog_cc_c89=$ac_arg - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext -+ -+rm -f core conftest.err conftest.$ac_objext -+ test "x$ac_cv_prog_cc_c89" != "xno" && break - done --rm -f conftest.$ac_ext conftest.$ac_objext -+rm -f conftest.$ac_ext - CC=$ac_save_CC - - fi -- --case "x$ac_cv_prog_cc_stdc" in -- x|xno) -- echo "$as_me:$LINENO: result: none needed" >&5 --echo "${ECHO_T}none needed" >&6 ;; -+# AC_CACHE_VAL -+case "x$ac_cv_prog_cc_c89" in -+ x) -+ { echo "$as_me:$LINENO: result: none needed" >&5 -+echo "${ECHO_T}none needed" >&6; } ;; -+ xno) -+ { echo "$as_me:$LINENO: result: unsupported" >&5 -+echo "${ECHO_T}unsupported" >&6; } ;; - *) -- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 --echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 -- CC="$CC $ac_cv_prog_cc_stdc" ;; -+ CC="$CC $ac_cv_prog_cc_c89" -+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; - esac - --# Some people use a C++ compiler to compile C. Since we use `exit', --# in C++ we need to declare it. In case someone uses the same compiler --# for both compiling C and C++ we need to have the C++ compiler decide --# the declaration of exit, since it's the most demanding environment. --cat >conftest.$ac_ext <<_ACEOF --#ifndef __cplusplus -- choke me --#endif --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- for ac_declaration in \ -- '' \ -- 'extern "C" void std::exit (int) throw (); using std::exit;' \ -- 'extern "C" void std::exit (int); using std::exit;' \ -- 'extern "C" void exit (int) throw ();' \ -- 'extern "C" void exit (int);' \ -- 'void exit (int);' --do -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --#include <stdlib.h> --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- : --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --continue --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -- cat >conftest.$ac_ext <<_ACEOF --/* confdefs.h. */ --_ACEOF --cat confdefs.h >>conftest.$ac_ext --cat >>conftest.$ac_ext <<_ACEOF --/* end confdefs.h. */ --$ac_declaration --int --main () --{ --exit (42); -- ; -- return 0; --} --_ACEOF --rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -- ac_status=$? -- grep -v '^ *+' conftest.er1 >conftest.err -- rm -f conftest.er1 -- cat conftest.err >&5 -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -- break --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext --done --rm -f conftest* --if test -n "$ac_declaration"; then -- echo '#ifdef __cplusplus' >>confdefs.h -- echo $ac_declaration >>confdefs.h -- echo '#endif' >>confdefs.h --fi - --else -- echo "$as_me: failed program was:" >&5 --sed 's/^/| /' conftest.$ac_ext >&5 -- --fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -@@ -4363,8 +5098,8 @@ - - depcc="$CC" am_compiler_list= - --echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 --echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } - if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4446,58 +5181,273 @@ - fi - done - -- cd .. -- rm -rf conftest.dir --else -- am_cv_CC_dependencies_compiler_type=none -+ cd .. -+ rm -rf conftest.dir -+else -+ am_cv_CC_dependencies_compiler_type=none -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } -+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type -+ -+ -+ -+if -+ test "x$enable_dependency_tracking" != xno \ -+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then -+ am__fastdepCC_TRUE= -+ am__fastdepCC_FALSE='#' -+else -+ am__fastdepCC_TRUE='#' -+ am__fastdepCC_FALSE= -+fi -+ -+ -+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } -+if test "${ac_cv_path_GREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ # Extract the first word of "grep ggrep" to use in msg output -+if test -z "$GREP"; then -+set dummy grep ggrep; ac_prog_name=$2 -+if test "${ac_cv_path_GREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_path_GREP_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in grep ggrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -+ # Check for GNU ac_path_GREP and select it if it is found. -+ # Check for GNU $ac_path_GREP -+case `"$ac_path_GREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo 'GREP' >> "conftest.nl" -+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_GREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_GREP="$ac_path_GREP" -+ ac_path_GREP_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ -+ $ac_path_GREP_found && break 3 -+ done -+done -+ -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ -+GREP="$ac_cv_path_GREP" -+if test -z "$GREP"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+else -+ ac_cv_path_GREP=$GREP -+fi -+ -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -+echo "${ECHO_T}$ac_cv_path_GREP" >&6; } -+ GREP="$ac_cv_path_GREP" -+ -+ -+{ echo "$as_me:$LINENO: checking for egrep" >&5 -+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } -+if test "${ac_cv_path_EGREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 -+ then ac_cv_path_EGREP="$GREP -E" -+ else -+ # Extract the first word of "egrep" to use in msg output -+if test -z "$EGREP"; then -+set dummy egrep; ac_prog_name=$2 -+if test "${ac_cv_path_EGREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_path_EGREP_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in egrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -+ # Check for GNU ac_path_EGREP and select it if it is found. -+ # Check for GNU $ac_path_EGREP -+case `"$ac_path_EGREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo 'EGREP' >> "conftest.nl" -+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_EGREP="$ac_path_EGREP" -+ ac_path_EGREP_max=$ac_count -+ fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ -+ $ac_path_EGREP_found && break 3 -+ done -+done -+ -+done -+IFS=$as_save_IFS -+ -+ - fi - -+EGREP="$ac_cv_path_EGREP" -+if test -z "$EGREP"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } - fi --echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 --echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 --CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - -+else -+ ac_cv_path_EGREP=$EGREP -+fi - - --if -- test "x$enable_dependency_tracking" != xno \ -- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then -- am__fastdepCC_TRUE= -- am__fastdepCC_FALSE='#' --else -- am__fastdepCC_TRUE='#' -- am__fastdepCC_FALSE= -+ fi - fi -+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } -+ EGREP="$ac_cv_path_EGREP" - - --echo "$as_me:$LINENO: checking for egrep" >&5 --echo $ECHO_N "checking for egrep... $ECHO_C" >&6 --if test "${ac_cv_prog_egrep+set}" = set; then -+{ echo "$as_me:$LINENO: checking for fgrep" >&5 -+echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } -+if test "${ac_cv_path_FGREP+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 -+ then ac_cv_path_FGREP="$GREP -F" -+ else -+ # Extract the first word of "fgrep" to use in msg output -+if test -z "$FGREP"; then -+set dummy fgrep; ac_prog_name=$2 -+if test "${ac_cv_path_FGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 -- then ac_cv_prog_egrep='grep -E' -- else ac_cv_prog_egrep='egrep' -+ ac_path_FGREP_found=false -+# Loop through the user's path and test for each of PROGNAME-LIST -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ for ac_prog in fgrep; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" -+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -+ # Check for GNU ac_path_FGREP and select it if it is found. -+ # Check for GNU $ac_path_FGREP -+case `"$ac_path_FGREP" --version 2>&1` in -+*GNU*) -+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -+*) -+ ac_count=0 -+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" -+ while : -+ do -+ cat "conftest.in" "conftest.in" >"conftest.tmp" -+ mv "conftest.tmp" "conftest.in" -+ cp "conftest.in" "conftest.nl" -+ echo 'FGREP' >> "conftest.nl" -+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break -+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break -+ ac_count=`expr $ac_count + 1` -+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then -+ # Best one so far, save it but keep looking for a better one -+ ac_cv_path_FGREP="$ac_path_FGREP" -+ ac_path_FGREP_max=$ac_count - fi -+ # 10*(2^10) chars as input seems more than enough -+ test $ac_count -gt 10 && break -+ done -+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -+esac -+ -+ -+ $ac_path_FGREP_found && break 3 -+ done -+done -+ -+done -+IFS=$as_save_IFS -+ -+ - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 --echo "${ECHO_T}$ac_cv_prog_egrep" >&6 -- EGREP=$ac_cv_prog_egrep - -+FGREP="$ac_cv_path_FGREP" -+if test -z "$FGREP"; then -+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} -+ { (exit 1); exit 1; }; } -+fi - --echo "$as_me:$LINENO: checking for fgrep" >&5 --echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 --if test "${ac_cv_prog_fgrep+set}" = set; then -- echo $ECHO_N "(cached) $ECHO_C" >&6 - else -- if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1 -- then ac_cv_prog_fgrep='grep -F' -- else ac_cv_prog_fgrep='fgrep' -- fi -+ ac_cv_path_FGREP=$FGREP -+fi -+ -+ -+ fi - fi --echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5 --echo "${ECHO_T}$ac_cv_prog_fgrep" >&6 -- FGREP=$ac_cv_prog_fgrep -+{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 -+echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } -+ FGREP="$ac_cv_path_FGREP" - - - test -z "$GREP" && GREP=grep -@@ -4520,18 +5470,18 @@ - - - --# Check whether --with-gnu-ld or --without-gnu-ld was given. -+# Check whether --with-gnu-ld was given. - if test "${with_gnu_ld+set}" = set; then -- withval="$with_gnu_ld" -- test "$withval" = no || with_gnu_ld=yes -+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes - else - with_gnu_ld=no --fi; -+fi -+ - ac_prog=ld - if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. -- echo "$as_me:$LINENO: checking for ld used by $CC" >&5 --echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw -@@ -4560,11 +5510,11 @@ - ;; - esac - elif test "$with_gnu_ld" = yes; then -- echo "$as_me:$LINENO: checking for GNU ld" >&5 --echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for GNU ld" >&5 -+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } - else -- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 --echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } - fi - if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -@@ -4597,17 +5547,17 @@ - - LD="$lt_cv_path_LD" - if test -n "$LD"; then -- echo "$as_me:$LINENO: result: $LD" >&5 --echo "${ECHO_T}$LD" >&6 -+ { echo "$as_me:$LINENO: result: $LD" >&5 -+echo "${ECHO_T}$LD" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 - echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } --echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 --echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } - if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4621,8 +5571,8 @@ - ;; - esac - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 --echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } - with_gnu_ld=$lt_cv_prog_gnu_ld - - -@@ -4633,8 +5583,8 @@ - - - --echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 --echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 -+echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } - if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4682,8 +5632,8 @@ - : ${lt_cv_path_NM=no} - fi - fi --echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 --echo "${ECHO_T}$lt_cv_path_NM" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -+echo "${ECHO_T}$lt_cv_path_NM" >&6; } - if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" - else -@@ -4693,8 +5643,8 @@ - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. - set dummy $ac_tool_prefix$ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_DUMPBIN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4707,25 +5657,27 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - DUMPBIN=$ac_cv_prog_DUMPBIN - if test -n "$DUMPBIN"; then -- echo "$as_me:$LINENO: result: $DUMPBIN" >&5 --echo "${ECHO_T}$DUMPBIN" >&6 -+ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 -+echo "${ECHO_T}$DUMPBIN" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$DUMPBIN" && break - done - fi -@@ -4735,8 +5687,8 @@ - do - # Extract the first word of "$ac_prog", so it can be a program name with args. - set dummy $ac_prog; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4749,30 +5701,45 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN - if test -n "$ac_ct_DUMPBIN"; then -- echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 --echo "${ECHO_T}$ac_ct_DUMPBIN" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 -+echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - test -n "$ac_ct_DUMPBIN" && break - done --test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":" - -- DUMPBIN=$ac_ct_DUMPBIN -+ if test "x$ac_ct_DUMPBIN" = x; then -+ DUMPBIN=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ DUMPBIN=$ac_ct_DUMPBIN -+ fi - fi - - -@@ -4787,43 +5754,43 @@ - - - --echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 --echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 -+echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } - if test "${lt_cv_nm_interface+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext -- (eval echo "\"\$as_me:4797: $ac_compile\"" >&5) -+ (eval echo "\"\$as_me:5764: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 -- (eval echo "\"\$as_me:4800: $NM \\\"conftest.$ac_objext\\\"\"" >&5) -+ (eval echo "\"\$as_me:5767: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 -- (eval echo "\"\$as_me:4803: output\"" >&5) -+ (eval echo "\"\$as_me:5770: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* - fi --echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 --echo "${ECHO_T}$lt_cv_nm_interface" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 -+echo "${ECHO_T}$lt_cv_nm_interface" >&6; } - --echo "$as_me:$LINENO: checking whether ln -s works" >&5 --echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 -+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } - LN_S=$as_ln_s - if test "$LN_S" = "ln -s"; then -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - else -- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 --echo "${ECHO_T}no, using $LN_S" >&6 -+ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -+echo "${ECHO_T}no, using $LN_S" >&6; } - fi - - # find the maximum length of command line arguments --echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 --echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } - if test "${lt_cv_sys_max_cmd_len+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -4942,11 +5909,11 @@ - fi - - if test -n $lt_cv_sys_max_cmd_len ; then -- echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 --echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 -+ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } - else -- echo "$as_me:$LINENO: result: none" >&5 --echo "${ECHO_T}none" >&6 -+ { echo "$as_me:$LINENO: result: none" >&5 -+echo "${ECHO_T}none" >&6; } - fi - max_cmd_len=$lt_cv_sys_max_cmd_len - -@@ -4959,8 +5926,8 @@ - : ${MV="mv -f"} - : ${RM="rm -f"} - --echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 --echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 -+echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } - # Try some XSI features - xsi_shell=no - ( _lt_dummy="a/b/c" -@@ -4969,18 +5936,18 @@ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes --echo "$as_me:$LINENO: result: $xsi_shell" >&5 --echo "${ECHO_T}$xsi_shell" >&6 -+{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 -+echo "${ECHO_T}$xsi_shell" >&6; } - - --echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 --echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 -+echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } - lt_shell_append=no - ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes --echo "$as_me:$LINENO: result: $lt_shell_append" >&5 --echo "${ECHO_T}$lt_shell_append" >&6 -+{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 -+echo "${ECHO_T}$lt_shell_append" >&6; } - - - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -5014,15 +5981,15 @@ - - - --echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 --echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } - if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - lt_cv_ld_reload_flag='-r' - fi --echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 --echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } - reload_flag=$lt_cv_ld_reload_flag - case $reload_flag in - "" | " "*) ;; -@@ -5050,8 +6017,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. - set dummy ${ac_tool_prefix}objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5064,32 +6031,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OBJDUMP=$ac_cv_prog_OBJDUMP - if test -n "$OBJDUMP"; then -- echo "$as_me:$LINENO: result: $OBJDUMP" >&5 --echo "${ECHO_T}$OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -+echo "${ECHO_T}$OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. - set dummy objdump; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5102,27 +6071,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" - fi - fi - ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP - if test -n "$ac_ct_OBJDUMP"; then -- echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 --echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OBJDUMP=$ac_ct_OBJDUMP -+ if test "x$ac_ct_OBJDUMP" = x; then -+ OBJDUMP="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OBJDUMP=$ac_ct_OBJDUMP -+ fi - else - OBJDUMP="$ac_cv_prog_OBJDUMP" - fi -@@ -5134,8 +6117,8 @@ - - - --echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 --echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 -+echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } - if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5330,8 +6313,8 @@ - esac - - fi --echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 --echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } - file_magic_cmd=$lt_cv_file_magic_cmd - deplibs_check_method=$lt_cv_deplibs_check_method - test -z "$deplibs_check_method" && deplibs_check_method=unknown -@@ -5350,8 +6333,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. - set dummy ${ac_tool_prefix}ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5364,32 +6347,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - AR=$ac_cv_prog_AR - if test -n "$AR"; then -- echo "$as_me:$LINENO: result: $AR" >&5 --echo "${ECHO_T}$AR" >&6 -+ { echo "$as_me:$LINENO: result: $AR" >&5 -+echo "${ECHO_T}$AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. - set dummy ar; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5402,27 +6387,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" - fi - fi - ac_ct_AR=$ac_cv_prog_ac_ct_AR - if test -n "$ac_ct_AR"; then -- echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 --echo "${ECHO_T}$ac_ct_AR" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -+echo "${ECHO_T}$ac_ct_AR" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- AR=$ac_ct_AR -+ if test "x$ac_ct_AR" = x; then -+ AR="false" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ AR=$ac_ct_AR -+ fi - else - AR="$ac_cv_prog_AR" - fi -@@ -5443,8 +6442,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. - set dummy ${ac_tool_prefix}strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5457,32 +6456,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - STRIP=$ac_cv_prog_STRIP - if test -n "$STRIP"; then -- echo "$as_me:$LINENO: result: $STRIP" >&5 --echo "${ECHO_T}$STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $STRIP" >&5 -+echo "${ECHO_T}$STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. - set dummy strip; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5495,27 +6496,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" - fi - fi - ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP - if test -n "$ac_ct_STRIP"; then -- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 --echo "${ECHO_T}$ac_ct_STRIP" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -+echo "${ECHO_T}$ac_ct_STRIP" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- STRIP=$ac_ct_STRIP -+ if test "x$ac_ct_STRIP" = x; then -+ STRIP=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ STRIP=$ac_ct_STRIP -+ fi - else - STRIP="$ac_cv_prog_STRIP" - fi -@@ -5530,8 +6545,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. - set dummy ${ac_tool_prefix}ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5544,32 +6559,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - RANLIB=$ac_cv_prog_RANLIB - if test -n "$RANLIB"; then -- echo "$as_me:$LINENO: result: $RANLIB" >&5 --echo "${ECHO_T}$RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $RANLIB" >&5 -+echo "${ECHO_T}$RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. - set dummy ranlib; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5582,27 +6599,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" - fi - fi - ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB - if test -n "$ac_ct_RANLIB"; then -- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 --echo "${ECHO_T}$ac_ct_RANLIB" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -+echo "${ECHO_T}$ac_ct_RANLIB" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- RANLIB=$ac_ct_RANLIB -+ if test "x$ac_ct_RANLIB" = x; then -+ RANLIB=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ RANLIB=$ac_ct_RANLIB -+ fi - else - RANLIB="$ac_cv_prog_RANLIB" - fi -@@ -5675,8 +6706,8 @@ - - - # Check for command to grab the raw symbol name followed by C symbol from nm. --echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 --echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } - if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -5895,11 +6926,11 @@ - lt_cv_sys_global_symbol_to_cdecl= - fi - if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then -- echo "$as_me:$LINENO: result: failed" >&5 --echo "${ECHO_T}failed" >&6 -+ { echo "$as_me:$LINENO: result: failed" >&5 -+echo "${ECHO_T}failed" >&6; } - else -- echo "$as_me:$LINENO: result: ok" >&5 --echo "${ECHO_T}ok" >&6 -+ { echo "$as_me:$LINENO: result: ok" >&5 -+echo "${ECHO_T}ok" >&6; } - fi - - -@@ -5924,11 +6955,11 @@ - - - --# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -+# Check whether --enable-libtool-lock was given. - if test "${enable_libtool_lock+set}" = set; then -- enableval="$enable_libtool_lock" -+ enableval=$enable_libtool_lock; -+fi - --fi; - test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - - # Some flags need to be propagated to the compiler or linker for good -@@ -5955,7 +6986,7 @@ - ;; - *-*-irix6*) - # Find out which ABI we are using. -- echo '#line 5958 "configure"' > conftest.$ac_ext -+ echo '#line 6989 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? -@@ -6047,8 +7078,8 @@ - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" -- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 --echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } - if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6074,35 +7105,32 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - lt_cv_cc_needs_belf=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --lt_cv_cc_needs_belf=no -+ lt_cv_cc_needs_belf=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c - ac_cpp='$CPP $CPPFLAGS' -@@ -6111,8 +7139,8 @@ - ac_compiler_gnu=$ac_cv_c_compiler_gnu - - fi --echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 --echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" -@@ -6151,8 +7179,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. - set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6165,32 +7193,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - DSYMUTIL=$ac_cv_prog_DSYMUTIL - if test -n "$DSYMUTIL"; then -- echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 --echo "${ECHO_T}$DSYMUTIL" >&6 -+ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -+echo "${ECHO_T}$DSYMUTIL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. - set dummy dsymutil; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6203,27 +7233,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":" - fi - fi - ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL - if test -n "$ac_ct_DSYMUTIL"; then -- echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 --echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- DSYMUTIL=$ac_ct_DSYMUTIL -+ if test "x$ac_ct_DSYMUTIL" = x; then -+ DSYMUTIL=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ DSYMUTIL=$ac_ct_DSYMUTIL -+ fi - else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" - fi -@@ -6231,8 +7275,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. - set dummy ${ac_tool_prefix}nmedit; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6245,32 +7289,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - NMEDIT=$ac_cv_prog_NMEDIT - if test -n "$NMEDIT"; then -- echo "$as_me:$LINENO: result: $NMEDIT" >&5 --echo "${ECHO_T}$NMEDIT" >&6 -+ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 -+echo "${ECHO_T}$NMEDIT" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. - set dummy nmedit; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6283,27 +7329,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":" - fi - fi - ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT - if test -n "$ac_ct_NMEDIT"; then -- echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 --echo "${ECHO_T}$ac_ct_NMEDIT" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- NMEDIT=$ac_ct_NMEDIT -+ if test "x$ac_ct_NMEDIT" = x; then -+ NMEDIT=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ NMEDIT=$ac_ct_NMEDIT -+ fi - else - NMEDIT="$ac_cv_prog_NMEDIT" - fi -@@ -6311,8 +7371,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. - set dummy ${ac_tool_prefix}lipo; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_LIPO+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6325,32 +7385,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - LIPO=$ac_cv_prog_LIPO - if test -n "$LIPO"; then -- echo "$as_me:$LINENO: result: $LIPO" >&5 --echo "${ECHO_T}$LIPO" >&6 -+ { echo "$as_me:$LINENO: result: $LIPO" >&5 -+echo "${ECHO_T}$LIPO" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. - set dummy lipo; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6363,27 +7425,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":" - fi - fi - ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO - if test -n "$ac_ct_LIPO"; then -- echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 --echo "${ECHO_T}$ac_ct_LIPO" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 -+echo "${ECHO_T}$ac_ct_LIPO" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- LIPO=$ac_ct_LIPO -+ if test "x$ac_ct_LIPO" = x; then -+ LIPO=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ LIPO=$ac_ct_LIPO -+ fi - else - LIPO="$ac_cv_prog_LIPO" - fi -@@ -6391,8 +7467,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. - set dummy ${ac_tool_prefix}otool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6405,32 +7481,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OTOOL=$ac_cv_prog_OTOOL - if test -n "$OTOOL"; then -- echo "$as_me:$LINENO: result: $OTOOL" >&5 --echo "${ECHO_T}$OTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $OTOOL" >&5 -+echo "${ECHO_T}$OTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. - set dummy otool; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6443,27 +7521,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":" - fi - fi - ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL - if test -n "$ac_ct_OTOOL"; then -- echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 --echo "${ECHO_T}$ac_ct_OTOOL" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 -+echo "${ECHO_T}$ac_ct_OTOOL" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OTOOL=$ac_ct_OTOOL -+ if test "x$ac_ct_OTOOL" = x; then -+ OTOOL=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OTOOL=$ac_ct_OTOOL -+ fi - else - OTOOL="$ac_cv_prog_OTOOL" - fi -@@ -6471,8 +7563,8 @@ - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. - set dummy ${ac_tool_prefix}otool64; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_OTOOL64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6485,32 +7577,34 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - - fi - fi - OTOOL64=$ac_cv_prog_OTOOL64 - if test -n "$OTOOL64"; then -- echo "$as_me:$LINENO: result: $OTOOL64" >&5 --echo "${ECHO_T}$OTOOL64" >&6 -+ { echo "$as_me:$LINENO: result: $OTOOL64" >&5 -+echo "${ECHO_T}$OTOOL64" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -+ - fi - if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. - set dummy otool64; ac_word=$2 --echo "$as_me:$LINENO: checking for $ac_word" >&5 --echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } - if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6523,27 +7617,41 @@ - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do -- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then -+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi - done - done -+IFS=$as_save_IFS - -- test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":" - fi - fi - ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 - if test -n "$ac_ct_OTOOL64"; then -- echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 --echo "${ECHO_T}$ac_ct_OTOOL64" >&6 -+ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 -+echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - -- OTOOL64=$ac_ct_OTOOL64 -+ if test "x$ac_ct_OTOOL64" = x; then -+ OTOOL64=":" -+ else -+ case $cross_compiling:$ac_tool_warned in -+yes:) -+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&5 -+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -+whose name does not start with the host triplet. If you think this -+configuration is useful to you, please write to autoconf@gnu.org." >&2;} -+ac_tool_warned=yes ;; -+esac -+ OTOOL64=$ac_ct_OTOOL64 -+ fi - else - OTOOL64="$ac_cv_prog_OTOOL64" - fi -@@ -6574,8 +7682,8 @@ - - - -- echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 --echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 -+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } - if test "${lt_cv_apple_cc_single_mod+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6601,10 +7709,10 @@ - rm -f conftest.* - fi - fi --echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 --echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6 -- echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 --echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 -+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } -+ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 -+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } - if test "${lt_cv_ld_exported_symbols_list+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6628,41 +7736,38 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - lt_cv_ld_exported_symbols_list=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --lt_cv_ld_exported_symbols_list=no -+ lt_cv_ld_exported_symbols_list=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - - fi --echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 --echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; -@@ -6703,8 +7808,8 @@ - ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' - ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' - ac_compiler_gnu=$ac_cv_c_compiler_gnu --echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 --echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } - # On Suns, sometimes $CPP names a directory. - if test -n "$CPP" && test -d "$CPP"; then - CPP= -@@ -6738,24 +7843,22 @@ - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - : - else - echo "$as_me: failed program was:" >&5 -@@ -6764,9 +7867,10 @@ - # Broken: fails on valid input. - continue - fi -+ - rm -f conftest.err conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -6776,24 +7880,22 @@ - /* end confdefs.h. */ - #include <ac_nonexistent.h> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - # Broken: success on invalid input. - continue - else -@@ -6804,6 +7906,7 @@ - ac_preproc_ok=: - break - fi -+ - rm -f conftest.err conftest.$ac_ext - - done -@@ -6821,8 +7924,8 @@ - else - ac_cv_prog_CPP=$CPP - fi --echo "$as_me:$LINENO: result: $CPP" >&5 --echo "${ECHO_T}$CPP" >&6 -+{ echo "$as_me:$LINENO: result: $CPP" >&5 -+echo "${ECHO_T}$CPP" >&6; } - ac_preproc_ok=false - for ac_c_preproc_warn_flag in '' yes - do -@@ -6845,24 +7948,22 @@ - #endif - Syntax error - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - : - else - echo "$as_me: failed program was:" >&5 -@@ -6871,9 +7972,10 @@ - # Broken: fails on valid input. - continue - fi -+ - rm -f conftest.err conftest.$ac_ext - -- # OK, works on sane cases. Now check whether non-existent headers -+ # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -@@ -6883,24 +7985,22 @@ - /* end confdefs.h. */ - #include <ac_nonexistent.h> - _ACEOF --if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 -- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 -+if { (ac_try="$ac_cpp conftest.$ac_ext" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } >/dev/null; then -- if test -s conftest.err; then -- ac_cpp_err=$ac_c_preproc_warn_flag -- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag -- else -- ac_cpp_err= -- fi --else -- ac_cpp_err=yes --fi --if test -z "$ac_cpp_err"; then -+ (exit $ac_status); } >/dev/null && { -+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || -+ test ! -s conftest.err -+ }; then - # Broken: success on invalid input. - continue - else -@@ -6911,6 +8011,7 @@ - ac_preproc_ok=: - break - fi -+ - rm -f conftest.err conftest.$ac_ext - - done -@@ -6933,8 +8034,8 @@ - ac_compiler_gnu=$ac_cv_c_compiler_gnu - - --echo "$as_me:$LINENO: checking for ANSI C header files" >&5 --echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } - if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -6958,35 +8059,31 @@ - } - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_header_stdc=no -+ ac_cv_header_stdc=no - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - - if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -@@ -7042,6 +8139,7 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - #include <ctype.h> -+#include <stdlib.h> - #if ((' ' & 0x0FF) == 0x020) - # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') - # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -@@ -7061,18 +8159,27 @@ - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) -- exit(2); -- exit (0); -+ return 2; -+ return 0; - } - _ACEOF - rm -f conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>&5 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -+ { (case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then -@@ -7085,12 +8192,14 @@ - ( exit $ac_status ) - ac_cv_header_stdc=no - fi --rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext - fi -+ -+ - fi - fi --echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 --echo "${ECHO_T}$ac_cv_header_stdc" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -+echo "${ECHO_T}$ac_cv_header_stdc" >&6; } - if test $ac_cv_header_stdc = yes; then - - cat >>confdefs.h <<\_ACEOF -@@ -7113,9 +8222,9 @@ - inttypes.h stdint.h unistd.h - do - as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -+{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - cat >conftest.$ac_ext <<_ACEOF -@@ -7129,38 +8238,35 @@ - #include <$ac_header> - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --eval "$as_ac_Header=no" -+ eval "$as_ac_Header=no" - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ac_res=`eval echo '${'$as_ac_Header'}'` -+ { echo "$as_me:$LINENO: result: $ac_res" >&5 -+echo "${ECHO_T}$ac_res" >&6; } - if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF - #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -@@ -7175,9 +8281,9 @@ - for ac_header in dlfcn.h - do - as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` --echo "$as_me:$LINENO: checking for $ac_header" >&5 --echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 --if eval "test \"\${$as_ac_Header+set}\" = set"; then -+{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else - cat >conftest.$ac_ext <<_ACEOF -@@ -7191,38 +8297,35 @@ - #include <$ac_header> - _ACEOF - rm -f conftest.$ac_objext --if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -- (eval $ac_compile) 2>conftest.er1 -+if { (ac_try="$ac_compile" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest.$ac_objext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --eval "$as_ac_Header=no" -+ eval "$as_ac_Header=no" - fi --rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -+ -+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 --echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -+ac_res=`eval echo '${'$as_ac_Header'}'` -+ { echo "$as_me:$LINENO: result: $ac_res" >&5 -+echo "${ECHO_T}$ac_res" >&6; } - if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF - #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -@@ -7242,10 +8345,9 @@ - - - -- # Check whether --enable-shared or --disable-shared was given. -+ # Check whether --enable-shared was given. - if test "${enable_shared+set}" = set; then -- enableval="$enable_shared" -- p=${PACKAGE-default} -+ enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; -@@ -7264,7 +8366,7 @@ - esac - else - enable_shared=yes --fi; -+fi - - - -@@ -7273,10 +8375,10 @@ - - - -- # Check whether --enable-static or --disable-static was given. -+ -+ # Check whether --enable-static was given. - if test "${enable_static+set}" = set; then -- enableval="$enable_static" -- p=${PACKAGE-default} -+ enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; -@@ -7295,7 +8397,7 @@ - esac - else - enable_static=yes --fi; -+fi - - - -@@ -7305,13 +8407,14 @@ - - - --# Check whether --with-pic or --without-pic was given. -+ -+# Check whether --with-pic was given. - if test "${with_pic+set}" = set; then -- withval="$with_pic" -- pic_mode="$withval" -+ withval=$with_pic; pic_mode="$withval" - else - pic_mode=default --fi; -+fi -+ - - test -z "$pic_mode" && pic_mode=default - -@@ -7321,10 +8424,9 @@ - - - -- # Check whether --enable-fast-install or --disable-fast-install was given. -+ # Check whether --enable-fast-install was given. - if test "${enable_fast_install+set}" = set; then -- enableval="$enable_fast_install" -- p=${PACKAGE-default} -+ enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; -@@ -7343,7 +8445,8 @@ - esac - else - enable_fast_install=yes --fi; -+fi -+ - - - -@@ -7403,8 +8506,8 @@ - setopt NO_GLOB_SUBST - fi - --echo "$as_me:$LINENO: checking for objdir" >&5 --echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for objdir" >&5 -+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } - if test "${lt_cv_objdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7418,8 +8521,8 @@ - fi - rmdir .libs 2>/dev/null - fi --echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 --echo "${ECHO_T}$lt_cv_objdir" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -+echo "${ECHO_T}$lt_cv_objdir" >&6; } - objdir=$lt_cv_objdir - - -@@ -7511,8 +8614,8 @@ - case $deplibs_check_method in - file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then -- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 --echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } - if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7564,11 +8667,11 @@ - - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if test -n "$MAGIC_CMD"; then -- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 --echo "${ECHO_T}$MAGIC_CMD" >&6 -+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -+echo "${ECHO_T}$MAGIC_CMD" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -7577,8 +8680,8 @@ - - if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then -- echo "$as_me:$LINENO: checking for file" >&5 --echo $ECHO_N "checking for file... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for file" >&5 -+echo $ECHO_N "checking for file... $ECHO_C" >&6; } - if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7630,11 +8733,11 @@ - - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if test -n "$MAGIC_CMD"; then -- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 --echo "${ECHO_T}$MAGIC_CMD" >&6 -+ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -+echo "${ECHO_T}$MAGIC_CMD" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - - -@@ -7714,8 +8817,8 @@ - if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - -- echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 --echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -7732,11 +8835,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:7735: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:8838: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 -- echo "$as_me:7739: \$? = $ac_status" >&5 -+ echo "$as_me:8842: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -@@ -7749,8 +8852,8 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } - - if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -@@ -7769,8 +8872,8 @@ - lt_prog_compiler_pic= - lt_prog_compiler_static= - --echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 --echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' -@@ -8041,8 +9144,8 @@ - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; - esac --echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 --echo "${ECHO_T}$lt_prog_compiler_pic" >&6 -+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } - - - -@@ -8053,8 +9156,8 @@ - # Check to make sure the PIC flag actually works. - # - if test -n "$lt_prog_compiler_pic"; then -- echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 --echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8071,11 +9174,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:8074: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:9177: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 -- echo "$as_me:8078: \$? = $ac_status" >&5 -+ echo "$as_me:9181: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. -@@ -8088,8 +9191,8 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } - - if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in -@@ -8112,8 +9215,8 @@ - # Check to make sure the static flag actually works. - # - wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" --echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 --echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8140,8 +9243,8 @@ - LDFLAGS="$save_LDFLAGS" - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } - - if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -@@ -8155,8 +9258,8 @@ - - - -- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8176,11 +9279,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:8179: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:9282: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:8183: \$? = $ac_status" >&5 -+ echo "$as_me:9286: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized -@@ -8202,16 +9305,16 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - - - - - - -- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 --echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } - if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -8231,11 +9334,11 @@ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` -- (eval echo "\"\$as_me:8234: $lt_compile\"" >&5) -+ (eval echo "\"\$as_me:9337: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 -- echo "$as_me:8238: \$? = $ac_status" >&5 -+ echo "$as_me:9341: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized -@@ -8257,8 +9360,8 @@ - $RM conftest* - - fi --echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 --echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - - - -@@ -8266,16 +9369,16 @@ - hard_links="nottested" - if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user -- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 --echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no -- echo "$as_me:$LINENO: result: $hard_links" >&5 --echo "${ECHO_T}$hard_links" >&6 -+ { echo "$as_me:$LINENO: result: $hard_links" >&5 -+echo "${ECHO_T}$hard_links" >&6; } - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 - echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} -@@ -8290,8 +9393,8 @@ - - - -- echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 --echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } - - runpath_var= - allow_undefined_flag= -@@ -8748,27 +9851,23 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { -@@ -8786,8 +9885,10 @@ - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - -@@ -8817,27 +9918,23 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { -@@ -8855,8 +9952,10 @@ - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - -@@ -9073,35 +10172,33 @@ - int foo(void) {} - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - else -@@ -9358,8 +10455,8 @@ - fi - fi - --echo "$as_me:$LINENO: result: $ld_shlibs" >&5 --echo "${ECHO_T}$ld_shlibs" >&6 -+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -+echo "${ECHO_T}$ld_shlibs" >&6; } - test "$ld_shlibs" = no && can_build_shared=no - - with_gnu_ld=$with_gnu_ld -@@ -9395,46 +10492,52 @@ - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. -- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 --echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 -- $RM conftest* -- echo "$lt_simple_compile_test_code" > conftest.$ac_ext -+ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } -+if test "${lt_cv_archive_cmds_need_lc+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ $RM conftest* -+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext - -- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 -+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then -- soname=conftest -- lib=conftest -- libobjs=conftest.$ac_objext -- deplibs= -- wl=$lt_prog_compiler_wl -- pic_flag=$lt_prog_compiler_pic -- compiler_flags=-v -- linker_flags=-v -- verstring= -- output_objdir=. -- libname=conftest -- lt_save_allow_undefined_flag=$allow_undefined_flag -- allow_undefined_flag= -- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 -+ soname=conftest -+ lib=conftest -+ libobjs=conftest.$ac_objext -+ deplibs= -+ wl=$lt_prog_compiler_wl -+ pic_flag=$lt_prog_compiler_pic -+ compiler_flags=-v -+ linker_flags=-v -+ verstring= -+ output_objdir=. -+ libname=conftest -+ lt_save_allow_undefined_flag=$allow_undefined_flag -+ allow_undefined_flag= -+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -- then -- archive_cmds_need_lc=no -- else -- archive_cmds_need_lc=yes -- fi -- allow_undefined_flag=$lt_save_allow_undefined_flag -- else -- cat conftest.err 1>&5 -- fi -- $RM conftest* -- echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 --echo "${ECHO_T}$archive_cmds_need_lc" >&6 -+ then -+ lt_cv_archive_cmds_need_lc=no -+ else -+ lt_cv_archive_cmds_need_lc=yes -+ fi -+ allow_undefined_flag=$lt_save_allow_undefined_flag -+ else -+ cat conftest.err 1>&5 -+ fi -+ $RM conftest* -+ -+fi -+{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 -+echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; } -+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi -@@ -9597,8 +10700,8 @@ - - - -- echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 --echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } - - if test "$GCC" = yes; then - case $host_os in -@@ -10014,12 +11117,17 @@ - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no -+ - # Some binutils ld are patched to set DT_RUNPATH -- save_LDFLAGS=$LDFLAGS -- save_libdir=$libdir -- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ -- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" -- cat >conftest.$ac_ext <<_ACEOF -+ if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ lt_cv_shlibpath_overrides_runpath=no -+ save_LDFLAGS=$LDFLAGS -+ save_libdir=$libdir -+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ -+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" -+ cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ - _ACEOF - cat confdefs.h >>conftest.$ac_ext -@@ -10035,40 +11143,42 @@ - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then -- shlibpath_overrides_runpath=yes -+ lt_cv_shlibpath_overrides_runpath=yes - fi - - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - -+ - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -- LDFLAGS=$save_LDFLAGS -- libdir=$save_libdir -+ LDFLAGS=$save_LDFLAGS -+ libdir=$save_libdir -+ -+fi -+ -+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install -@@ -10278,8 +11388,8 @@ - dynamic_linker=no - ;; - esac --echo "$as_me:$LINENO: result: $dynamic_linker" >&5 --echo "${ECHO_T}$dynamic_linker" >&6 -+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -+echo "${ECHO_T}$dynamic_linker" >&6; } - test "$dynamic_linker" = no && can_build_shared=no - - variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -@@ -10380,8 +11490,8 @@ - - - -- echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 --echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } - hardcode_action= - if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || -@@ -10405,8 +11515,8 @@ - # directories. - hardcode_action=unsupported - fi --echo "$as_me:$LINENO: result: $hardcode_action" >&5 --echo "${ECHO_T}$hardcode_action" >&6 -+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 -+echo "${ECHO_T}$hardcode_action" >&6; } - - if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then -@@ -10450,8 +11560,8 @@ - - darwin*) - # if libdl is installed we need to link against it -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } - if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10464,56 +11574,53 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - int - main () - { --dlopen (); -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dl_dlopen=no -+ ac_cv_lib_dl_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } - if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" - else -@@ -10527,8 +11634,8 @@ - ;; - - *) -- echo "$as_me:$LINENO: checking for shl_load" >&5 --echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for shl_load" >&5 -+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } - if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10555,73 +11662,64 @@ - - #undef shl_load - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" --{ - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char shl_load (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ --#if defined (__stub_shl_load) || defined (__stub___shl_load) -+#if defined __stub_shl_load || defined __stub___shl_load - choke me --#else --char (*f) () = shl_load; --#endif --#ifdef __cplusplus --} - #endif - - int - main () - { --return f != shl_load; -+return shl_load (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_func_shl_load=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_func_shl_load=no -+ ac_cv_func_shl_load=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 --echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } - if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" - else -- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 --echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } - if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10634,61 +11732,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char shl_load (); - int - main () - { --shl_load (); -+return shl_load (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_shl_load=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dld_shl_load=no -+ ac_cv_lib_dld_shl_load=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } - if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" - else -- echo "$as_me:$LINENO: checking for dlopen" >&5 --echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen" >&5 -+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } - if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10715,73 +11810,64 @@ - - #undef dlopen - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" --{ - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - /* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ --#if defined (__stub_dlopen) || defined (__stub___dlopen) -+#if defined __stub_dlopen || defined __stub___dlopen - choke me --#else --char (*f) () = dlopen; --#endif --#ifdef __cplusplus --} - #endif - - int - main () - { --return f != dlopen; -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_func_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_func_dlopen=no -+ ac_cv_func_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - fi --echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 --echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } - if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" - else -- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 --echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } - if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10794,61 +11880,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - int - main () - { --dlopen (); -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dl_dlopen=no -+ ac_cv_lib_dl_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } - if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" - else -- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 --echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } - if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10861,61 +11944,58 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dlopen (); - int - main () - { --dlopen (); -+return dlopen (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_svld_dlopen=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_svld_dlopen=no -+ ac_cv_lib_svld_dlopen=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 --echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } - if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" - else -- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 --echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } - if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -10928,56 +12008,53 @@ - cat >>conftest.$ac_ext <<_ACEOF - /* end confdefs.h. */ - --/* Override any gcc2 internal prototype to avoid an error. */ -+/* Override any GCC internal prototype to avoid an error. -+ Use char because int might match the return type of a GCC -+ builtin and then its argument prototype would still apply. */ - #ifdef __cplusplus - extern "C" - #endif --/* We use char because int might match the return type of a gcc2 -- builtin and then its argument prototype would still apply. */ - char dld_link (); - int - main () - { --dld_link (); -+return dld_link (); - ; - return 0; - } - _ACEOF - rm -f conftest.$ac_objext conftest$ac_exeext --if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 -- (eval $ac_link) 2>conftest.er1 -+if { (ac_try="$ac_link" -+case "(($ac_try" in -+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; -+ *) ac_try_echo=$ac_try;; -+esac -+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 -+ (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); } && -- { ac_try='test -z "$ac_c_werror_flag" -- || test ! -s conftest.err' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; } && -- { ac_try='test -s conftest$ac_exeext' -- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 -- (eval $ac_try) 2>&5 -- ac_status=$? -- echo "$as_me:$LINENO: \$? = $ac_status" >&5 -- (exit $ac_status); }; }; then -+ (exit $ac_status); } && { -+ test -z "$ac_c_werror_flag" || -+ test ! -s conftest.err -+ } && test -s conftest$ac_exeext && -+ $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_dld_link=yes - else - echo "$as_me: failed program was:" >&5 - sed 's/^/| /' conftest.$ac_ext >&5 - --ac_cv_lib_dld_dld_link=no -+ ac_cv_lib_dld_dld_link=no - fi --rm -f conftest.err conftest.$ac_objext \ -+ -+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$ac_check_lib_save_LIBS - fi --echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 --echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } - if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" - fi -@@ -11017,8 +12094,8 @@ - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - -- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 --echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } - if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -11028,7 +12105,7 @@ - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF --#line 11031 "configure" -+#line 12108 "configure" - #include "confdefs.h" - - #if HAVE_DLFCN_H -@@ -11108,13 +12185,13 @@ - - - fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" -- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 --echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } - if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 - else -@@ -11124,7 +12201,7 @@ - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF --#line 11127 "configure" -+#line 12204 "configure" - #include "confdefs.h" - - #if HAVE_DLFCN_H -@@ -11204,8 +12281,8 @@ - - - fi --echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 --echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 -+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" -@@ -11243,13 +12320,13 @@ - - striplib= - old_striplib= --echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 --echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } - if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - else - # FIXME - insert some real tests, host_os isn't really good enough - case $host_os in -@@ -11257,16 +12334,16 @@ - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" -- echo "$as_me:$LINENO: result: yes" >&5 --echo "${ECHO_T}yes" >&6 -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } - else -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - fi - ;; - *) -- echo "$as_me:$LINENO: result: no" >&5 --echo "${ECHO_T}no" >&6 -+ { echo "$as_me:$LINENO: result: no" >&5 -+echo "${ECHO_T}no" >&6; } - ;; - esac - fi -@@ -11283,13 +12360,13 @@ - - - # Report which library types will actually be built -- echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 --echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -- echo "$as_me:$LINENO: result: $can_build_shared" >&5 --echo "${ECHO_T}$can_build_shared" >&6 -+ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } -+ { echo "$as_me:$LINENO: result: $can_build_shared" >&5 -+echo "${ECHO_T}$can_build_shared" >&6; } - -- echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 --echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and -@@ -11309,15 +12386,15 @@ - fi - ;; - esac -- echo "$as_me:$LINENO: result: $enable_shared" >&5 --echo "${ECHO_T}$enable_shared" >&6 -+ { echo "$as_me:$LINENO: result: $enable_shared" >&5 -+echo "${ECHO_T}$enable_shared" >&6; } - -- echo "$as_me:$LINENO: checking whether to build static libraries" >&5 --echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -+ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes -- echo "$as_me:$LINENO: result: $enable_static" >&5 --echo "${ECHO_T}$enable_static" >&6 -+ { echo "$as_me:$LINENO: result: $enable_static" >&5 -+echo "${ECHO_T}$enable_static" >&6; } - - - -@@ -11343,7 +12420,7 @@ - - - -- ac_config_commands="$ac_config_commands libtool" -+ ac_config_commands="$ac_config_commands libtool" - - - -@@ -11355,101 +12432,55 @@ - - if test -n "${sys_dir}"; then - case ${sys_dir} in -- a29khif) -- --subdirs="$subdirs a29khif" -+ a29khif) subdirs="$subdirs a29khif" - ;; -- arc) -- --subdirs="$subdirs arc" -+ arc) subdirs="$subdirs arc" - ;; -- arm) -- --subdirs="$subdirs arm" -+ arm) subdirs="$subdirs arm" - ;; -- d10v) -- --subdirs="$subdirs d10v" -+ avr32) subdirs="$subdirs avr32" - ;; -- decstation) -- --subdirs="$subdirs decstation" -+ d10v) subdirs="$subdirs d10v" - ;; -- h8300hms) -- --subdirs="$subdirs h8300hms" -+ decstation) subdirs="$subdirs decstation" - ;; -- h8500hms) -- --subdirs="$subdirs h8500hms" -+ h8300hms) subdirs="$subdirs h8300hms" - ;; -- linux) -- --subdirs="$subdirs linux" -+ h8500hms) subdirs="$subdirs h8500hms" - ;; -- m88kbug) -- --subdirs="$subdirs m88kbug" -+ linux) subdirs="$subdirs linux" - ;; -- mmixware) -- --subdirs="$subdirs mmixware" -+ m88kbug) subdirs="$subdirs m88kbug" - ;; -- netware) -- --subdirs="$subdirs netware" -+ mmixware) subdirs="$subdirs mmixware" - ;; -- rdos) -- --subdirs="$subdirs rdos" -+ netware) subdirs="$subdirs netware" - ;; -- rtems) -- --subdirs="$subdirs rtems" -+ rdos) subdirs="$subdirs rdos" - ;; -- sh) -- --subdirs="$subdirs sh" -+ rtems) subdirs="$subdirs rtems" - ;; -- sparc64) -- --subdirs="$subdirs sparc64" -+ sh) subdirs="$subdirs sh" - ;; -- sun4) -- --subdirs="$subdirs sun4" -+ sparc64) subdirs="$subdirs sparc64" - ;; -- sysmec) -- --subdirs="$subdirs sysmec" -+ sun4) subdirs="$subdirs sun4" - ;; -- sysnec810) -- --subdirs="$subdirs sysnec810" -+ sysmec) subdirs="$subdirs sysmec" - ;; -- sysnecv850) -- --subdirs="$subdirs sysnecv850" -+ sysnec810) subdirs="$subdirs sysnec810" - ;; -- sysvi386) -- --subdirs="$subdirs sysvi386" -+ sysnecv850) subdirs="$subdirs sysnecv850" - ;; -- sysvnecv70) -- --subdirs="$subdirs sysvnecv70" -+ sysvi386) subdirs="$subdirs sysvi386" - ;; -- tic80) -- --subdirs="$subdirs tic80" -+ sysvnecv70) subdirs="$subdirs sysvnecv70" - ;; -- w65) -- --subdirs="$subdirs w65" -+ tic80) subdirs="$subdirs tic80" - ;; -- z8ksim) -- --subdirs="$subdirs z8ksim" -+ w65) subdirs="$subdirs w65" -+ ;; -+ z8ksim) subdirs="$subdirs z8ksim" - ;; - esac; - fi -@@ -11471,7 +12502,7 @@ - fi - - -- ac_config_files="$ac_config_files Makefile" -+ac_config_files="$ac_config_files Makefile" - - cat >confcache <<\_ACEOF - # This file is a shell script that caches the results of configure -@@ -11491,39 +12522,58 @@ - - # The following way of writing the cache mishandles newlines in values, - # but we know of no workaround that is simple, portable, and efficient. --# So, don't put newlines in cache variables' values. -+# So, we kill variables containing newlines. - # Ultrix sh set writes to stderr and can't be redirected directly, - # and sets the high bit in the cache file unless we assign to the vars. --{ -+( -+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ - (set) 2>&1 | -- case `(ac_space=' '; set | grep ac_space) 2>&1` in -- *ac_space=\ *) -+ case $as_nl`(ac_space=' '; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -- ;; -+ ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. -- sed -n \ -- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; -- esac; --} | -+ esac | -+ sort -+) | - sed ' -+ /^ac_cv_env_/b end - t clear -- : clear -+ :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end -- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -- : end' >>confcache --if diff $cache_file confcache >/dev/null 2>&1; then :; else -- if test -w $cache_file; then -- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" -+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -+ :end' >>confcache -+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else -+ if test -w "$cache_file"; then -+ test "x$cache_file" != "x/dev/null" && -+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -+echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else -- echo "not updating unwritable cache $cache_file" -+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -+echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi - fi - rm -f confcache -@@ -11532,63 +12582,48 @@ - # Let make expand exec_prefix. - test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - --# VPATH may cause trouble with some makes, so we remove $(srcdir), --# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and --# trailing colons and then remove the whole line if VPATH becomes empty --# (actually we leave an empty line to preserve line numbers). --if test "x$srcdir" = x.; then -- ac_vpsub='/^[ ]*VPATH[ ]*=/{ --s/:*\$(srcdir):*/:/; --s/:*\${srcdir}:*/:/; --s/:*@srcdir@:*/:/; --s/^\([^=]*=[ ]*\):*/\1/; --s/:*$//; --s/^[^=]*=[ ]*$//; --}' --fi -- - # Transform confdefs.h into DEFS. - # Protect against shell expansion while executing Makefile rules. - # Protect against Makefile macro expansion. - # - # If the first sed substitution is executed (which looks for macros that --# take arguments), then we branch to the quote section. Otherwise, -+# take arguments), then branch to the quote section. Otherwise, - # look for a macro that doesn't take arguments. --cat >confdef2opt.sed <<\_ACEOF -+ac_script=' - t clear --: clear --s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g -+:clear -+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g - t quote --s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g -+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g - t quote --d --: quote --s,[ `~#$^&*(){}\\|;'"<>?],\\&,g --s,\[,\\&,g --s,\],\\&,g --s,\$,$$,g --p --_ACEOF --# We use echo to avoid assuming a particular line-breaking character. --# The extra dot is to prevent the shell from consuming trailing --# line-breaks from the sub-command output. A line-break within --# single-quotes doesn't work because, if this script is created in a --# platform that uses two characters for line-breaks (e.g., DOS), tr --# would break. --ac_LF_and_DOT=`echo; echo .` --DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` --rm -f confdef2opt.sed -+b any -+:quote -+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -+s/\[/\\&/g -+s/\]/\\&/g -+s/\$/$$/g -+H -+:any -+${ -+ g -+ s/^\n// -+ s/\n/ /g -+ p -+} -+' -+DEFS=`sed -n "$ac_script" confdefs.h` - - - ac_libobjs= - ac_ltlibobjs= - for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. -- ac_i=`echo "$ac_i" | -- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` -- # 2. Add them. -- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" -- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -+ ac_i=`echo "$ac_i" | sed "$ac_script"` -+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR -+ # will be set to the directory where LIBOBJS objects are built. -+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" -+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' - done - LIBOBJS=$ac_libobjs - -@@ -11703,17 +12738,45 @@ - ## M4sh Initialization. ## - ## --------------------- ## - --# Be Bourne compatible -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' --elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -- set -o posix -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh - fi --DUALCASE=1; export DUALCASE # for MKS sh - - # Support unset when possible. - if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -@@ -11723,8 +12786,43 @@ - fi - - -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ - # Work around bugs in pre-3.0 UWIN ksh. --$as_unset ENV MAIL MAILPATH -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done - PS1='$ ' - PS2='> ' - PS4='+ ' -@@ -11738,18 +12836,19 @@ - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else -- $as_unset $as_var -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi - done - - # Required to use basename. --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - --if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename - else - as_basename=false -@@ -11757,159 +12856,120 @@ - - - # Name of the executable. --as_me=`$as_basename "$0" || -+as_me=`$as_basename -- "$0" || - $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ -- X"$0" : 'X\(/\)$' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || - echo X/"$0" | -- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -- /^X\/\(\/\/\)$/{ s//\1/; q; } -- /^X\/\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- -- --# PATH needs CR, and LINENO needs CR and PATH. --# Avoid depending upon Character Ranges. --as_cr_letters='abcdefghijklmnopqrstuvwxyz' --as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' --as_cr_Letters=$as_cr_letters$as_cr_LETTERS --as_cr_digits='0123456789' --as_cr_alnum=$as_cr_Letters$as_cr_digits -- --# The user is always right. --if test "${PATH_SEPARATOR+set}" != set; then -- echo "#! /bin/sh" >conf$$.sh -- echo "exit 0" >>conf$$.sh -- chmod +x conf$$.sh -- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -- PATH_SEPARATOR=';' -- else -- PATH_SEPARATOR=: -- fi -- rm -f conf$$.sh --fi -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH - - -- as_lineno_1=$LINENO -- as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` -- test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" || { -- # Find who we are. Look in the path if we contain no path at all -- # relative or not. -- case $0 in -- *[\\/]* ) as_myself=$0 ;; -- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in $PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break --done - -- ;; -- esac -- # We did not find ourselves, most probably we were run as `sh COMMAND' -- # in which case we are not to be found in the path. -- if test "x$as_myself" = x; then -- as_myself=$0 -- fi -- if test ! -f "$as_myself"; then -- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 --echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} -- { (exit 1); exit 1; }; } -- fi -- case $CONFIG_SHELL in -- '') -- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR --for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH --do -- IFS=$as_save_IFS -- test -z "$as_dir" && as_dir=. -- for as_base in sh bash ksh sh5; do -- case $as_dir in -- /*) -- if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO -- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && -- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then -- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } -- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } -- CONFIG_SHELL=$as_dir/$as_base -- export CONFIG_SHELL -- exec "$CONFIG_SHELL" "$0" ${1+"$@"} -- fi;; -- esac -- done --done --;; -- esac -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a -- # line-number line before each line; the second 'sed' does the real -- # work. The second script uses 'N' to pair each line-number line -- # with the numbered line, and appends trailing '-' during -- # substitution so that $LINENO is not a special case at line end. -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) -- sed '=' <$as_myself | -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | - sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno - N -- s,$,-, -- : loop -- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop -- s,-$,, -- s,^['$as_cr_digits']*\n,, -+ s/-\n.*// - ' >$as_me.lineno && -- chmod +x $as_me.lineno || -- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 --echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the -- # original and so on. Autoconf is especially sensible to this). -- . ./$as_me.lineno -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" - # Exit status is that of the last command. - exit - } - - --case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in -- *c*,-n*) ECHO_N= ECHO_C=' --' ECHO_T=' ' ;; -- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; -- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; - esac - --if expr a : '\(a\)' >/dev/null 2>&1; then -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr - else - as_expr=false - fi - - rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi - echo >conf$$.file - if ln -s conf$$.file conf$$ 2>/dev/null; then -- # We could just check for DJGPP; but this test a) works b) is more generic -- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). -- if test -f conf$$.exe; then -- # Don't use ln at all; we don't have any links -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -- else -- as_ln_s='ln -s' -- fi - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi --rm -f conf$$ conf$$.exe conf$$.file -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null - - if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -@@ -11918,7 +12978,28 @@ - as_mkdir_p=false - fi - --as_executable_p="test -f" -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x - - # Sed expression to map a string onto a valid CPP name. - as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -@@ -11927,31 +13008,14 @@ - as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - --# IFS --# We need space, tab and new line, in precisely that order. --as_nl=' --' --IFS=" $as_nl" -- --# CDPATH. --$as_unset CDPATH -- - exec 6>&1 - --# Open the log real soon, to keep \$[0] and so on meaningful, and to -+# Save the log message, to keep $[0] and so on meaningful, and to - # report actual input values of CONFIG_FILES etc. instead of their --# values after options handling. Logging --version etc. is OK. --exec 5>>config.log --{ -- echo -- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX --## Running $as_me. ## --_ASBOX --} >&5 --cat >&5 <<_CSEOF -- -+# values after options handling. -+ac_log=" - This file was extended by newlib $as_me 1.17.0, which was --generated by GNU Autoconf 2.59. Invocation command line was -+generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS -@@ -11959,30 +13023,19 @@ - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - --_CSEOF --echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 --echo >&5 -+on `(hostname || uname -n) 2>/dev/null | sed 1q` -+" -+ - _ACEOF - -+cat >>$CONFIG_STATUS <<_ACEOF - # Files that config.status was made for. --if test -n "$ac_config_files"; then -- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS --fi -- --if test -n "$ac_config_headers"; then -- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS --fi -- --if test -n "$ac_config_links"; then -- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS --fi -+config_files="$ac_config_files" -+config_commands="$ac_config_commands" - --if test -n "$ac_config_commands"; then -- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS --fi -+_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF -- - ac_cs_usage="\ - \`$as_me' instantiates files from templates according to the - current configuration. -@@ -11990,7 +13043,7 @@ - Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit -- -V, --version print version number, then exit -+ -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions -@@ -12004,19 +13057,21 @@ - $config_commands - - Report bugs to <bug-autoconf@gnu.org>." --_ACEOF - -+_ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - ac_cs_version="\\ - newlib config.status 1.17.0 --configured by $0, generated by GNU Autoconf 2.59, -- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" -+configured by $0, generated by GNU Autoconf 2.61, -+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" - --Copyright (C) 2003 Free Software Foundation, Inc. -+Copyright (C) 2006 Free Software Foundation, Inc. - This config.status script is free software; the Free Software Foundation - gives unlimited permission to copy, distribute and modify it." --srcdir=$srcdir --INSTALL="$INSTALL" -+ -+ac_pwd='$ac_pwd' -+srcdir='$srcdir' -+INSTALL='$INSTALL' - _ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF -@@ -12027,60 +13082,42 @@ - do - case $1 in - --*=*) -- ac_option=`expr "x$1" : 'x\([^=]*\)='` -- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` -+ ac_option=`expr "X$1" : 'X\([^=]*\)='` -+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; -- -*) -+ *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; -- *) # This is not an option, so the user has probably given explicit -- # arguments. -- ac_option=$1 -- ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; -- --version | --vers* | -V ) -- echo "$ac_cs_version"; exit 0 ;; -- --he | --h) -- # Conflict between --help and --header -- { { echo "$as_me:$LINENO: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: ambiguous option: $1 --Try \`$0 --help' for more information." >&2;} -- { (exit 1); exit 1; }; };; -- --help | --hel | -h ) -- echo "$ac_cs_usage"; exit 0 ;; -- --debug | --d* | -d ) -+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) -+ echo "$ac_cs_version"; exit ;; -+ --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; -- --header | --heade | --head | --hea ) -- $ac_shift -- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" -- ac_need_defaults=false;; -+ --he | --h | --help | --hel | -h ) -+ echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. -- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&5 --echo "$as_me: error: unrecognized option: $1 --Try \`$0 --help' for more information." >&2;} -+ -*) { echo "$as_me: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - -- *) ac_config_targets="$ac_config_targets $1" ;; -+ *) ac_config_targets="$ac_config_targets $1" -+ ac_need_defaults=false ;; - - esac - shift -@@ -12096,17 +13133,28 @@ - _ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - if \$ac_cs_recheck; then -- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -+ CONFIG_SHELL=$SHELL -+ export CONFIG_SHELL -+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - fi - - _ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+exec 5>>config.log -+{ -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+ echo "$ac_log" -+} >&5 - -+_ACEOF - cat >>$CONFIG_STATUS <<_ACEOF - # --# INIT-COMMANDS section. -+# INIT-COMMANDS - # -- - AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -@@ -12367,22 +13415,23 @@ - - _ACEOF - -- -- - cat >>$CONFIG_STATUS <<\_ACEOF -+ -+# Handling of arguments. - for ac_config_target in $ac_config_targets - do -- case "$ac_config_target" in -- # Handling of arguments. -- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; -- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -- "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; -+ case $ac_config_target in -+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; -+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; -+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 - echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac - done - -+ - # If the user did not use the arguments to specify the items to instantiate, - # then the envvar interface is used. Set only those that are not. - # We use the long form for the default assignment because of an extremely -@@ -12393,397 +13442,493 @@ - fi - - # Have a temporary directory for convenience. Make it in the build tree --# simply because there is no reason to put it here, and in addition, -+# simply because there is no reason against having it here, and in addition, - # creating and moving files from /tmp can sometimes cause problems. --# Create a temporary directory, and hook for its removal unless debugging. -+# Hook for its removal unless debugging. -+# Note that there is a small window in which the directory will not be cleaned: -+# after its creation but before its name has been assigned to `$tmp'. - $debug || - { -- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 -+ tmp= -+ trap 'exit_status=$? -+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 - } -- - # Create a (secure) tmp directory for tmp files. - - { -- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && -+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" - } || - { -- tmp=./confstat$$-$RANDOM -- (umask 077 && mkdir $tmp) -+ tmp=./conf$$-$RANDOM -+ (umask 077 && mkdir "$tmp") - } || - { - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } - } - --_ACEOF -- --cat >>$CONFIG_STATUS <<_ACEOF -- - # --# CONFIG_FILES section. -+# Set up the sed scripts for CONFIG_FILES section. - # - - # No need to generate the scripts if there are no CONFIG_FILES. - # This happens for instance when ./config.status config.h --if test -n "\$CONFIG_FILES"; then -- # Protect against being on the right side of a sed subst in config.status. -- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; -- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF --s,@SHELL@,$SHELL,;t t --s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t --s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t --s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t --s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t --s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t --s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t --s,@exec_prefix@,$exec_prefix,;t t --s,@prefix@,$prefix,;t t --s,@program_transform_name@,$program_transform_name,;t t --s,@bindir@,$bindir,;t t --s,@sbindir@,$sbindir,;t t --s,@libexecdir@,$libexecdir,;t t --s,@datadir@,$datadir,;t t --s,@sysconfdir@,$sysconfdir,;t t --s,@sharedstatedir@,$sharedstatedir,;t t --s,@localstatedir@,$localstatedir,;t t --s,@libdir@,$libdir,;t t --s,@includedir@,$includedir,;t t --s,@oldincludedir@,$oldincludedir,;t t --s,@infodir@,$infodir,;t t --s,@mandir@,$mandir,;t t --s,@build_alias@,$build_alias,;t t --s,@host_alias@,$host_alias,;t t --s,@target_alias@,$target_alias,;t t --s,@DEFS@,$DEFS,;t t --s,@ECHO_C@,$ECHO_C,;t t --s,@ECHO_N@,$ECHO_N,;t t --s,@ECHO_T@,$ECHO_T,;t t --s,@LIBS@,$LIBS,;t t --s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t --s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t --s,@newlib_basedir@,$newlib_basedir,;t t --s,@build@,$build,;t t --s,@build_cpu@,$build_cpu,;t t --s,@build_vendor@,$build_vendor,;t t --s,@build_os@,$build_os,;t t --s,@host@,$host,;t t --s,@host_cpu@,$host_cpu,;t t --s,@host_vendor@,$host_vendor,;t t --s,@host_os@,$host_os,;t t --s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t --s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t --s,@INSTALL_DATA@,$INSTALL_DATA,;t t --s,@CYGPATH_W@,$CYGPATH_W,;t t --s,@PACKAGE@,$PACKAGE,;t t --s,@VERSION@,$VERSION,;t t --s,@ACLOCAL@,$ACLOCAL,;t t --s,@AUTOCONF@,$AUTOCONF,;t t --s,@AUTOMAKE@,$AUTOMAKE,;t t --s,@AUTOHEADER@,$AUTOHEADER,;t t --s,@MAKEINFO@,$MAKEINFO,;t t --s,@install_sh@,$install_sh,;t t --s,@STRIP@,$STRIP,;t t --s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t --s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t --s,@mkdir_p@,$mkdir_p,;t t --s,@AWK@,$AWK,;t t --s,@SET_MAKE@,$SET_MAKE,;t t --s,@am__leading_dot@,$am__leading_dot,;t t --s,@AMTAR@,$AMTAR,;t t --s,@am__tar@,$am__tar,;t t --s,@am__untar@,$am__untar,;t t --s,@CC@,$CC,;t t --s,@DEPDIR@,$DEPDIR,;t t --s,@am__include@,$am__include,;t t --s,@am__quote@,$am__quote,;t t --s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t --s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t --s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t --s,@CCDEPMODE@,$CCDEPMODE,;t t --s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t --s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t --s,@AS@,$AS,;t t --s,@ac_ct_AS@,$ac_ct_AS,;t t --s,@AR@,$AR,;t t --s,@ac_ct_AR@,$ac_ct_AR,;t t --s,@RANLIB@,$RANLIB,;t t --s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t --s,@READELF@,$READELF,;t t --s,@ac_ct_READELF@,$ac_ct_READELF,;t t --s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t --s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t --s,@MAINT@,$MAINT,;t t --s,@CCAS@,$CCAS,;t t --s,@CCASFLAGS@,$CCASFLAGS,;t t --s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t --s,@LDFLAGS@,$LDFLAGS,;t t --s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t --s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t --s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t --s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t --s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t --s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t --s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t --s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t --s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t --s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t --s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t --s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t --s,@OBJEXT@,$OBJEXT,;t t --s,@oext@,$oext,;t t --s,@aext@,$aext,;t t --s,@lpfx@,$lpfx,;t t --s,@libm_machine_dir@,$libm_machine_dir,;t t --s,@machine_dir@,$machine_dir,;t t --s,@sys_dir@,$sys_dir,;t t --s,@SED@,$SED,;t t --s,@DLLTOOL@,$DLLTOOL,;t t --s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t --s,@OBJDUMP@,$OBJDUMP,;t t --s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t --s,@LIBTOOL@,$LIBTOOL,;t t --s,@CFLAGS@,$CFLAGS,;t t --s,@CPPFLAGS@,$CPPFLAGS,;t t --s,@ac_ct_CC@,$ac_ct_CC,;t t --s,@EXEEXT@,$EXEEXT,;t t --s,@EGREP@,$EGREP,;t t --s,@FGREP@,$FGREP,;t t --s,@GREP@,$GREP,;t t --s,@LD@,$LD,;t t --s,@DUMPBIN@,$DUMPBIN,;t t --s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t --s,@NM@,$NM,;t t --s,@LN_S@,$LN_S,;t t --s,@lt_ECHO@,$lt_ECHO,;t t --s,@DSYMUTIL@,$DSYMUTIL,;t t --s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t --s,@NMEDIT@,$NMEDIT,;t t --s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t --s,@LIPO@,$LIPO,;t t --s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t --s,@OTOOL@,$OTOOL,;t t --s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t --s,@OTOOL64@,$OTOOL64,;t t --s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t --s,@CPP@,$CPP,;t t --s,@subdirs@,$subdirs,;t t --s,@CRT0@,$CRT0,;t t --s,@HAVE_SYS_DIR_TRUE@,$HAVE_SYS_DIR_TRUE,;t t --s,@HAVE_SYS_DIR_FALSE@,$HAVE_SYS_DIR_FALSE,;t t --s,@LIBOBJS@,$LIBOBJS,;t t --s,@LTLIBOBJS@,$LTLIBOBJS,;t t --CEOF -- --_ACEOF -- -- cat >>$CONFIG_STATUS <<\_ACEOF -- # Split the substitutions into bite-sized pieces for seds with -- # small command number limits, like on Digital OSF/1 and HP-UX. -- ac_max_sed_lines=48 -- ac_sed_frag=1 # Number of current file. -- ac_beg=1 # First line for current file. -- ac_end=$ac_max_sed_lines # Line after last line for current file. -- ac_more_lines=: -- ac_sed_cmds= -- while $ac_more_lines; do -- if test $ac_beg -gt 1; then -- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- else -- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag -- fi -- if test ! -s $tmp/subs.frag; then -- ac_more_lines=false -- else -- # The purpose of the label and of the branching condition is to -- # speed up the sed processing (if there are no `@' at all, there -- # is no need to browse any of the substitutions). -- # These are the two extra sed commands mentioned above. -- (echo ':t -- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" -- else -- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" -- fi -- ac_sed_frag=`expr $ac_sed_frag + 1` -- ac_beg=$ac_end -- ac_end=`expr $ac_end + $ac_max_sed_lines` -- fi -- done -- if test -z "$ac_sed_cmds"; then -- ac_sed_cmds=cat -+if test -n "$CONFIG_FILES"; then -+ -+_ACEOF -+ -+ -+ -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ cat >conf$$subs.sed <<_ACEOF -+SHELL!$SHELL$ac_delim -+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -+PACKAGE_NAME!$PACKAGE_NAME$ac_delim -+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -+PACKAGE_STRING!$PACKAGE_STRING$ac_delim -+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -+exec_prefix!$exec_prefix$ac_delim -+prefix!$prefix$ac_delim -+program_transform_name!$program_transform_name$ac_delim -+bindir!$bindir$ac_delim -+sbindir!$sbindir$ac_delim -+libexecdir!$libexecdir$ac_delim -+datarootdir!$datarootdir$ac_delim -+datadir!$datadir$ac_delim -+sysconfdir!$sysconfdir$ac_delim -+sharedstatedir!$sharedstatedir$ac_delim -+localstatedir!$localstatedir$ac_delim -+includedir!$includedir$ac_delim -+oldincludedir!$oldincludedir$ac_delim -+docdir!$docdir$ac_delim -+infodir!$infodir$ac_delim -+htmldir!$htmldir$ac_delim -+dvidir!$dvidir$ac_delim -+pdfdir!$pdfdir$ac_delim -+psdir!$psdir$ac_delim -+libdir!$libdir$ac_delim -+localedir!$localedir$ac_delim -+mandir!$mandir$ac_delim -+DEFS!$DEFS$ac_delim -+ECHO_C!$ECHO_C$ac_delim -+ECHO_N!$ECHO_N$ac_delim -+ECHO_T!$ECHO_T$ac_delim -+LIBS!$LIBS$ac_delim -+build_alias!$build_alias$ac_delim -+host_alias!$host_alias$ac_delim -+target_alias!$target_alias$ac_delim -+MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim -+MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim -+newlib_basedir!$newlib_basedir$ac_delim -+build!$build$ac_delim -+build_cpu!$build_cpu$ac_delim -+build_vendor!$build_vendor$ac_delim -+build_os!$build_os$ac_delim -+host!$host$ac_delim -+host_cpu!$host_cpu$ac_delim -+host_vendor!$host_vendor$ac_delim -+host_os!$host_os$ac_delim -+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -+INSTALL_DATA!$INSTALL_DATA$ac_delim -+CYGPATH_W!$CYGPATH_W$ac_delim -+PACKAGE!$PACKAGE$ac_delim -+VERSION!$VERSION$ac_delim -+ACLOCAL!$ACLOCAL$ac_delim -+AUTOCONF!$AUTOCONF$ac_delim -+AUTOMAKE!$AUTOMAKE$ac_delim -+AUTOHEADER!$AUTOHEADER$ac_delim -+MAKEINFO!$MAKEINFO$ac_delim -+install_sh!$install_sh$ac_delim -+STRIP!$STRIP$ac_delim -+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim -+mkdir_p!$mkdir_p$ac_delim -+AWK!$AWK$ac_delim -+SET_MAKE!$SET_MAKE$ac_delim -+am__leading_dot!$am__leading_dot$ac_delim -+AMTAR!$AMTAR$ac_delim -+am__tar!$am__tar$ac_delim -+am__untar!$am__untar$ac_delim -+CC!$CC$ac_delim -+DEPDIR!$DEPDIR$ac_delim -+am__include!$am__include$ac_delim -+am__quote!$am__quote$ac_delim -+AMDEP_TRUE!$AMDEP_TRUE$ac_delim -+AMDEP_FALSE!$AMDEP_FALSE$ac_delim -+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim -+CCDEPMODE!$CCDEPMODE$ac_delim -+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim -+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim -+AS!$AS$ac_delim -+AR!$AR$ac_delim -+RANLIB!$RANLIB$ac_delim -+READELF!$READELF$ac_delim -+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim -+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim -+MAINT!$MAINT$ac_delim -+CCAS!$CCAS$ac_delim -+CCASFLAGS!$CCASFLAGS$ac_delim -+NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim -+LDFLAGS!$LDFLAGS$ac_delim -+ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim -+ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim -+ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim -+ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim -+ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim -+ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim -+ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim -+_ACEOF -+ -+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then -+ break -+ elif $ac_last_try; then -+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi --fi # test -n "$CONFIG_FILES" -+done -+ -+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -+if test -n "$ac_eof"; then -+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` -+ ac_eof=`expr $ac_eof + 1` -+fi -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -+_ACEOF -+sed ' -+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -+s/^/s,@/; s/!/@,|#_!!_#|/ -+:n -+t n -+s/'"$ac_delim"'$/,g/; t -+s/$/\\/; p -+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -+' >>$CONFIG_STATUS <conf$$subs.sed -+rm -f conf$$subs.sed -+cat >>$CONFIG_STATUS <<_ACEOF -+CEOF$ac_eof -+_ACEOF -+ -+ -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ cat >conf$$subs.sed <<_ACEOF -+ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim -+ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim -+ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim -+USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim -+USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim -+OBJEXT!$OBJEXT$ac_delim -+oext!$oext$ac_delim -+aext!$aext$ac_delim -+lpfx!$lpfx$ac_delim -+libm_machine_dir!$libm_machine_dir$ac_delim -+machine_dir!$machine_dir$ac_delim -+sys_dir!$sys_dir$ac_delim -+SED!$SED$ac_delim -+DLLTOOL!$DLLTOOL$ac_delim -+OBJDUMP!$OBJDUMP$ac_delim -+LIBTOOL!$LIBTOOL$ac_delim -+CFLAGS!$CFLAGS$ac_delim -+CPPFLAGS!$CPPFLAGS$ac_delim -+ac_ct_CC!$ac_ct_CC$ac_delim -+EXEEXT!$EXEEXT$ac_delim -+GREP!$GREP$ac_delim -+EGREP!$EGREP$ac_delim -+FGREP!$FGREP$ac_delim -+LD!$LD$ac_delim -+DUMPBIN!$DUMPBIN$ac_delim -+ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim -+NM!$NM$ac_delim -+LN_S!$LN_S$ac_delim -+lt_ECHO!$lt_ECHO$ac_delim -+DSYMUTIL!$DSYMUTIL$ac_delim -+NMEDIT!$NMEDIT$ac_delim -+LIPO!$LIPO$ac_delim -+OTOOL!$OTOOL$ac_delim -+OTOOL64!$OTOOL64$ac_delim -+CPP!$CPP$ac_delim -+subdirs!$subdirs$ac_delim -+CRT0!$CRT0$ac_delim -+HAVE_SYS_DIR_TRUE!$HAVE_SYS_DIR_TRUE$ac_delim -+HAVE_SYS_DIR_FALSE!$HAVE_SYS_DIR_FALSE$ac_delim -+LIBOBJS!$LIBOBJS$ac_delim -+LTLIBOBJS!$LTLIBOBJS$ac_delim -+_ACEOF -+ -+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 41; then -+ break -+ elif $ac_last_try; then -+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " -+ fi -+done -+ -+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -+if test -n "$ac_eof"; then -+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` -+ ac_eof=`expr $ac_eof + 1` -+fi - -+cat >>$CONFIG_STATUS <<_ACEOF -+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -+_ACEOF -+sed ' -+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -+s/^/s,@/; s/!/@,|#_!!_#|/ -+:n -+t n -+s/'"$ac_delim"'$/,g/; t -+s/$/\\/; p -+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -+' >>$CONFIG_STATUS <conf$$subs.sed -+rm -f conf$$subs.sed -+cat >>$CONFIG_STATUS <<_ACEOF -+:end -+s/|#_!!_#|//g -+CEOF$ac_eof - _ACEOF -+ -+ -+# VPATH may cause trouble with some makes, so we remove $(srcdir), -+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). -+if test "x$srcdir" = x.; then -+ ac_vpsub='/^[ ]*VPATH[ ]*=/{ -+s/:*\$(srcdir):*/:/ -+s/:*\${srcdir}:*/:/ -+s/:*@srcdir@:*/:/ -+s/^\([^=]*=[ ]*\):*/\1/ -+s/:*$// -+s/^[^=]*=[ ]*$// -+}' -+fi -+ - cat >>$CONFIG_STATUS <<\_ACEOF --for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue -- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". -- case $ac_file in -- - | *:- | *:-:* ) # input from stdin -- cat >$tmp/stdin -- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; -- * ) ac_file_in=$ac_file.in ;; -+fi # test -n "$CONFIG_FILES" -+ -+ -+for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS -+do -+ case $ac_tag in -+ :[FHLC]) ac_mode=$ac_tag; continue;; -+ esac -+ case $ac_mode$ac_tag in -+ :[FHL]*:*);; -+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -+echo "$as_me: error: Invalid tag $ac_tag." >&2;} -+ { (exit 1); exit 1; }; };; -+ :[FH]-) ac_tag=-:-;; -+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; -+ esac -+ ac_save_IFS=$IFS -+ IFS=: -+ set x $ac_tag -+ IFS=$ac_save_IFS -+ shift -+ ac_file=$1 -+ shift -+ -+ case $ac_mode in -+ :L) ac_source=$1;; -+ :[FH]) -+ ac_file_inputs= -+ for ac_f -+ do -+ case $ac_f in -+ -) ac_f="$tmp/stdin";; -+ *) # Look for the file first in the build tree, then in the source tree -+ # (if the path is not absolute). The absolute path cannot be DOS-style, -+ # because $ac_f cannot contain `:'. -+ test -f "$ac_f" || -+ case $ac_f in -+ [\\/$]*) false;; -+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; -+ esac || -+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -+echo "$as_me: error: cannot find input file: $ac_f" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+ ac_file_inputs="$ac_file_inputs $ac_f" -+ done -+ -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ configure_input="Generated from "`IFS=: -+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." -+ if test x"$ac_file" != x-; then -+ configure_input="$ac_file. $configure_input" -+ { echo "$as_me:$LINENO: creating $ac_file" >&5 -+echo "$as_me: creating $ac_file" >&6;} -+ fi -+ -+ case $ac_tag in -+ *:-:* | *:-) cat >"$tmp/stdin";; -+ esac -+ ;; - esac - -- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. -- ac_dir=`(dirname "$ac_file") 2>/dev/null || -+ ac_dir=`$as_dirname -- "$ac_file" || - $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ -- X"$ac_file" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || - echo X"$ac_file" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || - echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - ac_builddir=. - --if test "$ac_dir" != .; then -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac - -+ case $ac_mode in -+ :F) -+ # -+ # CONFIG_FILE -+ # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; -+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac -+_ACEOF - -- if test x"$ac_file" != x-; then -- { echo "$as_me:$LINENO: creating $ac_file" >&5 --echo "$as_me: creating $ac_file" >&6;} -- rm -f "$ac_file" -- fi -- # Let's still pretend it is `configure' which instantiates (i.e., don't -- # use $as_me), people would be surprised to read: -- # /* config.h. Generated by config.status. */ -- if test x"$ac_file" = x-; then -- configure_input= -- else -- configure_input="$ac_file. " -- fi -- configure_input=$configure_input"Generated from `echo $ac_file_in | -- sed 's,.*/,,'` by configure." -- -- # First look for the input files in the build tree, otherwise in the -- # src tree. -- ac_file_inputs=`IFS=: -- for f in $ac_file_in; do -- case $f in -- -) echo $tmp/stdin ;; -- [\\/$]*) -- # Absolute (can't be DOS-style, as IFS=:) -- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- echo "$f";; -- *) # Relative -- if test -f "$f"; then -- # Build tree -- echo "$f" -- elif test -f "$srcdir/$f"; then -- # Source tree -- echo "$srcdir/$f" -- else -- # /dev/null tree -- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 --echo "$as_me: error: cannot find input file: $f" >&2;} -- { (exit 1); exit 1; }; } -- fi;; -- esac -- done` || { (exit 1); exit 1; } -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If the template does not know about datarootdir, expand it. -+# FIXME: This hack should be removed a few years after 2.60. -+ac_datarootdir_hack=; ac_datarootdir_seen= -+ -+case `sed -n '/datarootdir/ { -+ p -+ q -+} -+/@datadir@/p -+/@docdir@/p -+/@infodir@/p -+/@localedir@/p -+/@mandir@/p -+' $ac_file_inputs` in -+*datarootdir*) ac_datarootdir_seen=yes;; -+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) -+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ ac_datarootdir_hack=' -+ s&@datadir@&$datadir&g -+ s&@docdir@&$docdir&g -+ s&@infodir@&$infodir&g -+ s&@localedir@&$localedir&g -+ s&@mandir@&$mandir&g -+ s&\\\${datarootdir}&$datarootdir&g' ;; -+esac - _ACEOF -+ -+# Neutralize VPATH when `$srcdir' = `.'. -+# Shell code in configure.ac might set extrasub. -+# FIXME: do we really want to maintain this feature? - cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub - $extrasub -@@ -12791,142 +13936,43 @@ - cat >>$CONFIG_STATUS <<\_ACEOF - :t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b --s,@configure_input@,$configure_input,;t t --s,@srcdir@,$ac_srcdir,;t t --s,@abs_srcdir@,$ac_abs_srcdir,;t t --s,@top_srcdir@,$ac_top_srcdir,;t t --s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t --s,@builddir@,$ac_builddir,;t t --s,@abs_builddir@,$ac_abs_builddir,;t t --s,@top_builddir@,$ac_top_builddir,;t t --s,@abs_top_builddir@,$ac_abs_top_builddir,;t t --s,@INSTALL@,$ac_INSTALL,;t t --" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out -- rm -f $tmp/stdin -- if test x"$ac_file" != x-; then -- mv $tmp/out $ac_file -- else -- cat $tmp/out -- rm -f $tmp/out -- fi -- --done --_ACEOF --cat >>$CONFIG_STATUS <<\_ACEOF -- --# --# CONFIG_COMMANDS section. --# --for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue -- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` -- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` -- ac_dir=`(dirname "$ac_dest") 2>/dev/null || --$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$ac_dest" : 'X\(//\)[^/]' \| \ -- X"$ac_dest" : 'X\(//\)$' \| \ -- X"$ac_dest" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$ac_dest" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -- as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || --$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -- X"$as_dir" : 'X\(//\)[^/]' \| \ -- X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || --echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -- { (exit 1); exit 1; }; }; } -+s&@configure_input@&$configure_input&;t t -+s&@top_builddir@&$ac_top_builddir_sub&;t t -+s&@srcdir@&$ac_srcdir&;t t -+s&@abs_srcdir@&$ac_abs_srcdir&;t t -+s&@top_srcdir@&$ac_top_srcdir&;t t -+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -+s&@builddir@&$ac_builddir&;t t -+s&@abs_builddir@&$ac_abs_builddir&;t t -+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -+s&@INSTALL@&$ac_INSTALL&;t t -+$ac_datarootdir_hack -+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out -+ -+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&5 -+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&2;} - -- ac_builddir=. -- --if test "$ac_dir" != .; then -- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ rm -f "$tmp/stdin" -+ case $ac_file in -+ -) cat "$tmp/out"; rm -f "$tmp/out";; -+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; -+ esac -+ ;; - --case $srcdir in -- .) # No --srcdir option. We are building in place. -- ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -- ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac - --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; --esac -+ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 -+echo "$as_me: executing $ac_file commands" >&6;} -+ ;; -+ esac - - -- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 --echo "$as_me: executing $ac_dest commands" >&6;} -- case $ac_dest in -- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do -+ case $ac_file$ac_mode in -+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. -@@ -12936,18 +13982,29 @@ - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then -- dirpart=`(dirname "$mf") 2>/dev/null || -+ dirpart=`$as_dirname -- "$mf" || - $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ -- X"$mf" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$mf" : 'X\(/\)' \| . 2>/dev/null || - echo X"$mf" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` - else - continue - fi -@@ -12969,49 +14026,76 @@ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue -- fdir=`(dirname "$file") 2>/dev/null || -+ fdir=`$as_dirname -- "$file" || - $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ -- X"$file" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$file" : 'X\(/\)' \| . 2>/dev/null || - echo X"$file" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -- { if $as_mkdir_p; then -- mkdir -p $dirpart/$fdir -- else -- as_dir=$dirpart/$fdir -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir=$dirpart/$fdir -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || - echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 --echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done - ;; -- libtool ) -+ "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. -@@ -13652,11 +14736,10 @@ - chmod +x "$ofile" - - ;; -+ - esac --done --_ACEOF -+done # for ac_tag - --cat >>$CONFIG_STATUS <<\_ACEOF - - { (exit 0); exit 0; } - _ACEOF -@@ -13686,7 +14769,7 @@ - fi - - # --# CONFIG_SUBDIRS section, as fixed in confsubdir.m4. -+# CONFIG_SUBDIRS section. - # - if test "$no_recursion" != yes; then - -@@ -13733,7 +14816,12 @@ - case $ac_arg in - *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac -- ac_sub_configure_args="$ac_arg $ac_sub_configure_args" -+ ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" -+ -+ # Pass --silent -+ if test "$silent" = yes; then -+ ac_sub_configure_args="--silent $ac_sub_configure_args" -+ fi - - ac_popdir=`pwd` - for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue -@@ -13742,97 +14830,83 @@ - # parts of a large source tree are present. - test -d "$srcdir/$ac_dir" || continue - -- { echo "$as_me:$LINENO: configuring in $ac_dir" >&5 --echo "$as_me: configuring in $ac_dir" >&6;} -- { if $as_mkdir_p; then -- mkdir -p "$ac_dir" -- else -- as_dir="$ac_dir" -+ ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" -+ echo "$as_me:$LINENO: $ac_msg" >&5 -+ echo "$ac_msg" >&6 -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= -- while test ! -d "$as_dir"; do -- as_dirs="$as_dir $as_dirs" -- as_dir=`(dirname "$as_dir") 2>/dev/null || -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || - $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ -- X"$as_dir" : 'X\(/\)' \| \ -- . : '\(.\)' 2>/dev/null || -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || - echo X"$as_dir" | -- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } -- /^X\(\/\/\)[^/].*/{ s//\1/; q; } -- /^X\(\/\/\)$/{ s//\1/; q; } -- /^X\(\/\).*/{ s//\1/; q; } -- s/.*/./; q'` -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break - done -- test ! -n "$as_dirs" || mkdir $as_dirs -- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 --echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } -- - ac_builddir=. - --if test "$ac_dir" != .; then -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -- # A "../" for each directory in $ac_dir_suffix. -- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` --else -- ac_dir_suffix= ac_top_builddir= --fi -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix - - case $srcdir in -- .) # No --srcdir option. We are building in place. -+ .) # We are building in place. - ac_srcdir=. -- if test -z "$ac_top_builddir"; then -- ac_top_srcdir=. -- else -- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` -- fi ;; -- [\\/]* | ?:[\\/]* ) # Absolute path. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; -- ac_top_srcdir=$srcdir ;; -- *) # Relative path. -- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix -- ac_top_srcdir=$ac_top_builddir$srcdir ;; --esac -- --# Do not use `cd foo && pwd` to compute absolute paths, because --# the directories may not exist. --case `pwd` in --.) ac_abs_builddir="$ac_dir";; --*) -- case "$ac_dir" in -- .) ac_abs_builddir=`pwd`;; -- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; -- *) ac_abs_builddir=`pwd`/"$ac_dir";; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_builddir=${ac_top_builddir}.;; --*) -- case ${ac_top_builddir}. in -- .) ac_abs_top_builddir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; -- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_srcdir=$ac_srcdir;; --*) -- case $ac_srcdir in -- .) ac_abs_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; -- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; -- esac;; --esac --case $ac_abs_builddir in --.) ac_abs_top_srcdir=$ac_top_srcdir;; --*) -- case $ac_top_srcdir in -- .) ac_abs_top_srcdir=$ac_abs_builddir;; -- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; -- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; -- esac;; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; - esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - cd "$ac_dir" -@@ -13856,8 +14930,8 @@ - # Make the cache file name correct relative to the subdirectory. - case $cache_file in - [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; -- *) # Relative path. -- ac_sub_cache_file=$ac_top_builddir$cache_file ;; -+ *) # Relative name. -+ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; - esac - - { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 -diff -Naur newlib-1.17.0/newlib/libc/sys/configure.in newlib-1.17.0-new/newlib/libc/sys/configure.in ---- newlib-1.17.0/newlib/libc/sys/configure.in 2007-05-24 19:33:37.000000000 +0200 -+++ newlib-1.17.0-new/newlib/libc/sys/configure.in 2009-05-22 09:57:50.000000000 +0200 -@@ -24,6 +24,7 @@ - a29khif) AC_CONFIG_SUBDIRS(a29khif) ;; - arc) AC_CONFIG_SUBDIRS(arc) ;; - arm) AC_CONFIG_SUBDIRS(arm) ;; -+ avr32) AC_CONFIG_SUBDIRS(avr32) ;; - d10v) AC_CONFIG_SUBDIRS(d10v) ;; - decstation) AC_CONFIG_SUBDIRS(decstation) ;; - h8300hms) AC_CONFIG_SUBDIRS(h8300hms) ;; |