diff options
Diffstat (limited to 'scripts/build/libc/glibc.sh')
| -rw-r--r-- | scripts/build/libc/glibc.sh | 317 |
1 files changed, 105 insertions, 212 deletions
diff --git a/scripts/build/libc/glibc.sh b/scripts/build/libc/glibc.sh index 472acad..8027b8f 100644 --- a/scripts/build/libc/glibc.sh +++ b/scripts/build/libc/glibc.sh @@ -41,10 +41,6 @@ do_libc_extract() { CT_Popd } -do_libc_check_config() { - : -} - # Build and install headers and start files do_libc_start_files() { # Start files and Headers should be configured the same way as the @@ -68,14 +64,6 @@ do_libc_post_cc() { # libc_mode : 'startfiles' or 'final' : string : (none) do_libc_backend() { local libc_mode - local -a multilibs - local multilib - local multi_dir - local multi_flags - local extra_dir - local target - local libc_headers libc_startfiles libc_full - local hdr local arg for arg in "$@"; do @@ -85,167 +73,77 @@ do_libc_backend() { case "${libc_mode}" in startfiles) CT_DoStep INFO "Installing C library headers & start files" - hdr=y - libc_startfiles=y - libc_full= ;; final) CT_DoStep INFO "Installing C library" - hdr= - libc_startfiles= - libc_full=y ;; - *) CT_Abort "Unsupported (or unset) libc_mode='${libc_mode}'";; + *) + CT_Abort "Unsupported (or unset) libc_mode='${libc_mode}'" + ;; esac - # If gcc is not configured for multilib, it still prints - # a single line for the default settings - multilibs=( $("${CT_TARGET}-gcc" -print-multi-lib 2>/dev/null) ) - for multilib in "${multilibs[@]}"; do - multi_dir="${multilib%%;*}" - if [ "${multi_dir}" != "." ]; then - CT_DoStep INFO "Building for multilib subdir='${multi_dir}'" - - extra_flags="$( echo "${multilib#*;}" \ - |${sed} -r -e 's/@/ -/g;' \ - )" - extra_dir="/${multi_dir}" - - # glibc install its files in ${extra_dir}/{usr/,}lib - # while gcc expects them in {,usr/}lib/${extra_dir}. - # Prepare some symlinks so glibc installs in fact in - # the proper place - # We do it in the start-files step, so it is not needed - # to do it in the final step, as the symlinks will - # already exist - if [ "${libc_mode}" = "startfiles" ]; then - CT_Pushd "${CT_SYSROOT_DIR}" - CT_DoExecLog ALL mkdir -p "lib/${multi_dir}" \ - "usr/lib/${multi_dir}" \ - "${multi_dir}" \ - "${multi_dir}/usr" - CT_DoExecLog ALL ln -sf "../lib/${multi_dir}" "${multi_dir}/lib" - CT_DoExecLog ALL ln -sf "../../usr/lib/${multi_dir}" "${multi_dir}/usr/lib" - CT_Popd - fi - libc_headers= - else - extra_dir= - extra_flags= - libc_headers="${hdr}" - fi - - CT_mkdir_pushd "${CT_BUILD_DIR}/build-libc-${libc_mode}${extra_dir//\//_}" - - target=$( CT_DoMultilibTarget "${CT_TARGET}" ${extra_flags} ) - case "${target}" in - # SPARC quirk: glibc 2.23 and newer dropped support for SPARCv8 and - # earlier (corresponding pthread barrier code is missing). Until this - # support is reintroduced, configure as sparcv9. - sparc-*) - if [ "${CT_LIBC_GLIBC_2_23_or_later}" = y ]; then - target=${target/#sparc-/sparcv9-} - fi - ;; - # x86 quirk: architecture name is i386, but glibc expects i[4567]86 - to - # indicate the desired optimization. If it was a multilib variant of x86_64, - # then it targets at least NetBurst a.k.a. i786, but we'll follow arch/x86.sh - # and set the optimization to i686. Otherwise, replace with the most - # conservative choice, i486. - i386-*) - if [ "${CT_TARGET_ARCH}" = "x86_64" ]; then - target=${target/#i386-/i686-} - else - target=${target/#i386-/i486-} - fi - ;; - esac - - do_libc_backend_once extra_dir="${extra_dir}" \ - extra_flags="${extra_flags}" \ - libc_headers="${libc_headers}" \ - libc_startfiles="${libc_startfiles}" \ - libc_full="${libc_full}" \ - target="${target}" - - CT_Popd - - if [ "${multi_dir}" != "." ]; then - if [ "${libc_mode}" = "final" ]; then - CT_DoLog EXTRA "Fixing up multilib location" - - # rewrite the library multiplexers - for d in "lib/${multi_dir}" "usr/lib/${multi_dir}"; do - for l in libc libpthread libgcc_s; do - if [ -f "${CT_SYSROOT_DIR}/${d}/${l}.so" \ - -a ! -L ${CT_SYSROOT_DIR}/${d}/${l}.so ] - then - CT_DoExecLog DEBUG ${sed} -r -i \ - -e "s:/lib/:/lib/${multi_dir}/:g;" \ - "${CT_SYSROOT_DIR}/${d}/${l}.so" - fi - done - done - # Remove the multi_dir now it is no longer useful - CT_DoExecLog DEBUG rm -rf "${CT_SYSROOT_DIR}/${multi_dir}" - fi # libc_mode == final - - CT_EndStep - fi - done - + CT_mkdir_pushd "${CT_BUILD_DIR}/build-libc-${libc_mode}" + CT_IterateMultilibs do_libc_backend_once multilib libc_mode="${libc_mode}" + CT_Popd CT_EndStep } # This backend builds the C library once # Usage: do_libc_backend_once param=value [...] -# Parameter : Definition : Type : Default -# libc_headers : Build libc headers : bool : n -# libc_startfiles : Build libc start-files : bool : n -# libc_full : Build full libc : bool : n -# extra_flags : Extra CFLAGS to use (for multilib) : string : (empty) -# extra_dir : Extra subdir for multilib : string : (empty) -# target : Build libc using this target (for multilib) : string : ${CT_TARGET} +# Parameter : Definition : Type +# libc_mode : 'startfiles' or 'final' : string : (empty) +# multi_* : as defined in CT_IterateMultilibs : (varies) : do_libc_backend_once() { - local libc_headers - local libc_startfiles - local libc_full - local extra_flags - local extra_dir + local multi_flags multi_dir multi_os_dir multi_root multi_index multi_count + local startfiles_dir local src_dir="${CT_SRC_DIR}/${CT_LIBC}-${CT_LIBC_VERSION}" - local extra_cc_args local -a extra_config local -a extra_make_args local glibc_cflags - local float_extra - local endian_extra - local target - local arg + local arg opt for arg in "$@"; do eval "${arg// /\\ }" done - if [ "${target}" = "" ]; then - target="${CT_TARGET}" + CT_DoStep INFO "Building for multilib ${multi_index}/${multi_count}: '${multi_flags}'" + + # Ensure sysroot (with suffix, if applicable) exists + CT_DoExecLog ALL mkdir -p "${multi_root}" + + # Adjust target tuple according GLIBC quirks + CT_DoArchGlibcAdjustTuple multi_target + + # Glibc seems to be smart enough to know about the cases that can coexist + # in the same root and installs them into proper multilib-os directory; all + # we need is to point to the right root. We do need to handle multilib-os + # here, though, for the first pass where we install crt*.o and a dummy + # libc.so; we therefore install it to the most specific location of + # <sysroot>/<suffix>/usr/lib/<multilib-os> where it is least likely to clash + # with other multilib variants. We then remove these temporary files at + # the beginning of the libc-final step and allow glibc to install them + # where it thinks is proper. + startfiles_dir="${multi_root}/usr/lib/${multi_os_dir}" + CT_SanitizeVarDir startfiles_dir + + if [ "${libc_mode}" = "final" ]; then + CT_DoLog EXTRA "Cleaning up start files" + CT_DoExecLog ALL rm -f "${startfiles_dir}/crt1.o" \ + "${startfiles_dir}/crti.o" \ + "${startfiles_dir}/crtn.o" \ + "${startfiles_dir}/libc.so" fi CT_DoLog EXTRA "Configuring C library" - case "${CT_LIBC}" in - glibc) - # glibc can't be built without -O2 (reference needed!) - OPTIMIZE=-O2 - # Also, if those two are missing, iconv build breaks - extra_config+=( --disable-debug --disable-sanity-checks ) - ;; - esac + # Also, if those two are missing, iconv build breaks + extra_config+=( --disable-debug --disable-sanity-checks ) # always include rpc, the user can still override it with TI-RPC extra_config+=( --enable-obsolete-rpc ) # Add some default glibc config options if not given by user. - # We don't need to be conditional on wether the user did set different + # We don't need to be conditional on whether the user did set different # values, as they CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY is passed after # extra_config @@ -267,21 +165,6 @@ do_libc_backend_once() { *) extra_config+=("--disable-shared");; esac - float_extra="$( echo "${extra_flags}" \ - |${sed} -r -e '/^(.*[[:space:]])?-m(hard|soft)-float([[:space:]].*)?$/!d;' \ - -e 's//\2/;' \ - )" - case "${float_extra}" in - hard) extra_config+=("--with-fp");; - soft) extra_config+=("--without-fp");; - "") - case "${CT_ARCH_FLOAT}" in - hard|softfp) extra_config+=("--with-fp");; - soft) extra_config+=("--without-fp");; - esac - ;; - esac - if [ "${CT_LIBC_DISABLE_VERSIONING}" = "y" ]; then extra_config+=("--disable-versioning") fi @@ -298,24 +181,6 @@ do_libc_backend_once() { extra_config+=("--with-pkgversion=${CT_PKGVERSION}") [ -n "${CT_TOOLCHAIN_BUGURL}" ] && extra_config+=("--with-bugurl=${CT_TOOLCHAIN_BUGURL}") - # Extract the endianness options if any - # This should cover all possible endianness options - # in gcc, but it is prone to bit-rot... :-( - endian_extra="$( echo "${extra_flags}" \ - |${sed} -r -e '/^(.*[[:space:]])?-(E[BL]|m((big|little)(-endian)?|e?[bl]))([[:space:]].*)?$/!d;' \ - -e 's//\2/;' \ - )" - # If extra_flags contained an endianness option, no need to add it again. Otherwise, - # add the option from the configuration. - case "${endian_extra}" in - EB|mbig-endian|mbig|meb|mb) - ;; - EL|mlittle-endian|mlittle|mel|ml) - ;; - "") extra_cc_args="${extra_cc_args} ${CT_ARCH_ENDIAN_OPT}" - ;; - esac - touch config.cache if [ "${CT_LIBC_GLIBC_FORCE_UNWIND}" = "y" ]; then echo "libc_cv_forced_unwind=yes" >>config.cache @@ -325,14 +190,30 @@ do_libc_backend_once() { # Pre-seed the configparms file with values from the config option printf "%s\n" "${CT_LIBC_GLIBC_CONFIGPARMS}" > configparms - cross_cc=$(CT_Which "${CT_TARGET}-gcc") - extra_cc_args+=" ${extra_flags}" + # glibc can't be built without -O2 (reference needed!) + glibc_cflags+=" -O2" case "${CT_LIBC_ENABLE_FORTIFIED_BUILD}" in y) ;; *) glibc_cflags+=" -U_FORTIFY_SOURCE";; esac - glibc_cflags+=" ${CT_TARGET_CFLAGS} ${OPTIMIZE} ${CT_LIBC_GLIBC_EXTRA_CFLAGS}" + + # In the order of increasing precedence. Flags common to compiler and linker. + glibc_cflags+=" ${CT_TARGET_CFLAGS}" + glibc_cflags+=" ${CT_LIBC_GLIBC_EXTRA_CFLAGS}" + glibc_cflags+=" ${multi_flags}" + + # Analyze the resulting options for any extra configure switches to throw in. + for opt in ${glibc_cflags}; do + case ${opt} in + -mhard-float|-mfloat-abi=hard|-mfloat-abi=softfp|-mno-soft-float|-mfpu) + extra_config+=("--with-fp") + ;; + -msoft-float|-mfloat-abi=soft|-mno-float|-mno-fpu) + extra_config+=("--without-fp") + ;; + esac + done # ./configure is mislead by our tools override wrapper for bash # so just tell it where the real bash is _on_the_target_! @@ -349,31 +230,35 @@ do_libc_backend_once() { # Configure with --prefix the way we want it on the target... # There are a whole lot of settings here. You'll probably want - # to read up on what they all mean, and customize a bit, possibly by setting GLIBC_EXTRA_CONFIG_ARRAY - # Compare these options with the ones used when installing the glibc headers above - they're different. - # Adding "--without-gd" option to avoid error "memusagestat.c:36:16: gd.h: No such file or directory" + # to read up on what they all mean, and customize a bit, possibly + # by setting GLIBC_EXTRA_CONFIG_ARRAY. + # Compare these options with the ones used when installing + # the glibc headers above - they're different. + # Adding "--without-gd" option to avoid error "memusagestat.c:36:16: + # gd.h: No such file or directory" # See also http://sources.redhat.com/ml/libc-alpha/2000-07/msg00024.html. # Set BUILD_CC, or we won't be able to build datafiles # Run explicitly through CONFIG_SHELL, or the build breaks badly (loop-of-death) # when the shell is not bash... Sigh... :-( - CT_DoLog DEBUG "Using gcc for target : '${cross_cc}'" - CT_DoLog DEBUG "Configuring with addons : '$(do_libc_add_ons_list ,)'" - CT_DoLog DEBUG "Extra config args passed: '${extra_config[*]}'" - CT_DoLog DEBUG "Extra CC args passed : '${glibc_cflags}'" - CT_DoLog DEBUG "Extra flags (multilib) : '${extra_flags}'" + CT_DoLog DEBUG "Configuring with addons : '$(do_libc_add_ons_list ,)'" + CT_DoLog DEBUG "Extra config args passed : '${extra_config[*]}'" + CT_DoLog DEBUG "Extra CFLAGS passed : '${glibc_cflags}'" + CT_DoLog DEBUG "Placing startfiles into : '${startfiles_dir}'" + CT_DoLog DEBUG "Configuring with --host : '${multi_target}'" + # CFLAGS are only applied when compiling .c files. .S files are compiled with ASFLAGS, + # but they are not passed by configure. Thus, pass everything in CC instead. CT_DoExecLog CFG \ - BUILD_CC="${CT_BUILD}-gcc" \ - CFLAGS="${glibc_cflags}" \ - CC="${CT_TARGET}-gcc ${CT_LIBC_EXTRA_CC_ARGS} ${extra_cc_args}" \ + BUILD_CC=${CT_BUILD}-gcc \ + CC="${CT_TARGET}-gcc ${glibc_cflags}" \ AR=${CT_TARGET}-ar \ RANLIB=${CT_TARGET}-ranlib \ "${CONFIG_SHELL}" \ "${src_dir}/configure" \ --prefix=/usr \ --build=${CT_BUILD} \ - --host=${target} \ + --host=${multi_target} \ --cache-file="$(pwd)/config.cache" \ --without-cvs \ --disable-profile \ @@ -409,13 +294,14 @@ do_libc_backend_once() { ;; esac - if [ "${libc_headers}" = "y" ]; then + if [ "${libc_mode}" = "startfiles" -a ! -r "${multi_root}/.libc_headers_installed" ]; then CT_DoLog EXTRA "Installing C library headers" + CT_DoExecLog ALL touch "${multi_root}/.libc_headers_installed" # use the 'install-headers' makefile target to install the # headers CT_DoExecLog ALL ${make} ${JOBSFLAGS} \ - install_root=${CT_SYSROOT_DIR}${extra_dir} \ + install_root=${multi_root} \ install-bootstrap-headers=yes \ "${extra_make_args[@]}" \ install-headers @@ -456,47 +342,52 @@ do_libc_backend_once() { ;; esac fi - fi # libc_headers == y + elif [ "${libc_mode}" = "final" -a -r "${multi_root}/.libc_headers_installed" ]; then + CT_DoExecLog ALL rm -f "${multi_root}/.libc_headers_installed" + fi # installing headers - if [ "${libc_startfiles}" = "y" ]; then + if [ "${libc_mode}" = "startfiles" ]; then if [ "${CT_THREADS}" = "nptl" ]; then CT_DoLog EXTRA "Installing C library start files" # there are a few object files needed to link shared libraries, # which we build and install by hand - CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}${extra_dir}/usr/lib" + CT_DoExecLog ALL mkdir -p "${startfiles_dir}" CT_DoExecLog ALL ${make} ${JOBSFLAGS} \ - "${extra_make_args[@]}" \ + "${extra_make_args[@]}" \ csu/subdir_lib CT_DoExecLog ALL cp csu/crt1.o csu/crti.o csu/crtn.o \ - "${CT_SYSROOT_DIR}${extra_dir}/usr/lib" + "${startfiles_dir}" # Finally, 'libgcc_s.so' requires a 'libc.so' to link against. # However, since we will never actually execute its code, # it doesn't matter what it contains. So, treating '/dev/null' # as a C source file, we produce a dummy 'libc.so' in one step - CT_DoExecLog ALL "${cross_cc}" ${extra_flags} \ - -nostdlib \ - -nostartfiles \ - -shared \ - -x c /dev/null \ - -o "${CT_SYSROOT_DIR}${extra_dir}/usr/lib/libc.so" + CT_DoExecLog ALL "${CT_TARGET}-gcc" ${multi_flags} \ + -nostdlib \ + -nostartfiles \ + -shared \ + -x c /dev/null \ + -o "${startfiles_dir}/libc.so" fi # threads == nptl - fi # libc_headers == y + fi # libc_mode = startfiles - if [ "${libc_full}" = "y" ]; then + if [ "${libc_mode}" = "final" ]; then CT_DoLog EXTRA "Building C library" CT_DoExecLog ALL ${make} ${JOBSFLAGS} \ "${extra_make_args[@]}" \ all CT_DoLog EXTRA "Installing C library" - CT_DoExecLog ALL ${make} ${JOBSFLAGS} \ - "${extra_make_args[@]}" \ - install_root="${CT_SYSROOT_DIR}${extra_dir}" \ + CT_DoExecLog ALL ${make} ${JOBSFLAGS} \ + "${extra_make_args[@]}" \ + install_root="${multi_root}" \ install - if [ "${CT_BUILD_MANUALS}" = "y" ]; then + if [ "${CT_BUILD_MANUALS}" = "y" -a "${multi_index}" = "${multi_count}" ]; then + # We only need to build the manuals once. Only build them on the + # last multilib target. If it's not multilib, it will happen on the + # only target. CT_DoLog EXTRA "Building and installing the C library manual" # Omit JOBSFLAGS as GLIBC has problems building the # manuals in parallel @@ -507,10 +398,12 @@ do_libc_backend_once() { ${CT_PREFIX_DIR}/share/doc fi - if [ "${CT_LIBC_LOCALES}" = "y" ]; then + if [ "${CT_LIBC_LOCALES}" = "y" -a "${multi_index}" = "${multi_count}" ]; then do_libc_locales fi - fi # libc_full == y + fi # libc_mode = final + + CT_EndStep } # Build up the addons list, separated with $1 |