summaryrefslogtreecommitdiff
path: root/config/libc
AgeCommit message (Collapse)AuthorFilesLines
2016-08-23uclibc: merge startfiles/final into single backend.Alexey Neyman1-2/+2
In preparation for multilib support, use the same "backend" model that is already employed by glibc and musl. Also, the verbosity setting descriptions were swapped. V=2 is actually less verbose than V=1: V=1 prints full commands, while V=2 prints 'CC <file> <defines>'. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23Spelling fixes.Alexey Neyman1-2/+2
Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23glibc.sh: cleanupsAlexey Neyman1-10/+0
- Dump CT_LIBC_EXTRA_CC_ARGS: instead, treat CT_LIBC_EXTRA_CFLAGS as arguments to CC (or they are not applied to .S, for example). Combine them with multi_flags and CT_TARGET_CFLAGS in proper order. - Analyze thus combined flags to determine --with-fp/--without-fp. Don't need to check CT_ARCH_FLOAT - it is reflected in CT_TARGET_CFLAGS anyway. Check more soft/hard float options defined on different architectures. - Drop checking for endianness flags: they are not reflected in configure arguments in any way, and they're already present in CFLAGS (either via multi_flags or via CT_TARGET_CFLAGS). Besides, CT_ARCH_ENDIAN_OPT was actually called CT_ARCH_ENDIAN_CFLAG, so this was a no-op anyway. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-06-10musl: config is broken for !EXPERIMENTALAlexey Neyman1-0/+1
If EXPERIMENTAL is not set, the only choice for version is the set of released versions - currently, 1.1.14. But this only option is disabled because it is also marked EXPERIMENTAL; this leaves no available choices in the configuration. Marking MUSL as experimental: it seems to have header issues which prevent, for example, gdbserver from building. musl copied chunks of ptrace.h code from the kernel into its own headers, which now clash with Linux kernel headers. Manifests at least on SH4 target. Also, musl breaks in powerpc builds: GCC balks at it with "unsupported DEFAULT_LIBC" message. Also, 64-bit powerpc and mips are not supported. So, until someone figures out the dependencies for musl in config/, mark it experimental. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-04-02Unbreak sparc-unknown-linux-gnu.Alexey Neyman1-1/+6
GLIBC 2.23 dropped support for pre-v9 SPARC in pthreads. Pass host triplet with s/sparc/sparcv9/ replacement for 2.23. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-03-08newlib: add option to enable nano formatted ioBryan Hundven1-0/+10
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2016-03-08newlib: add option to enable nano mallocBryan Hundven1-0/+11
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2016-03-08newlib: Update newlib versionsBryan Hundven1-3/+17
Newlib release seem to be snapshots now. Newlib 2.3.0 was released in git here: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=commit;h=ad7b3cde9c157f2c34a6a1296e0bda1ad0975bda and the snapshot for 2.3.0 was here: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=commit;h=06cd7127e3cf16ab3c0aa665956deb263e524753 The 2.2 series was also updated. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2016-02-29musl-libc: Update to 1.1.14Bryan Hundven1-7/+2
We also remove the old 1.0 series. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2016-02-24glibc: Clean out old glibc versionsBryan Hundven1-86/+2
We now only support glibc >=2.18 This now enables us to clean up glibc support! Also, add a comment about glibc 2.20 as the point which glibc no longer supports not building with pthread. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2016-02-23glibc: Add glibc-2.23Bryan Hundven1-0/+6
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2016-02-05uClibc-ng: Update to 1.0.12Bryan Hundven1-5/+5
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2016-01-12uClibc-ng: Update to 1.0.11Bryan Hundven1-5/+5
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-12-08Whitespace: We don't use tabs in shell or kconfig filesBryan Hundven1-3/+3
We indent by multiples of 4. This change cleans up whitespace in offending files. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-12-08config: Update kconfig for new CT_GetCustomBryan Hundven5-83/+203
This commit sort of unifies the kconfigs to handle custom files and directories. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-30gcc: Remove gcc <= 4.7.xBryan Hundven1-8/+2
As per #222, in crosstool-NG >= 1.23.0, we will only support: [upstream supported gcc versions] - 1 As of this writing, these versions are: * 5.2.0 * 4.9.3 * 4.8.5 (the -1, since development on 4.8.x is now closed) I plan to keep 4.8.5 around because of some architectures having issues with over-optimization or just faulty optimization in the 4.9.x and possibly newer versions. I also cleaned up a requirement for glibc to depend on >= gcc-4.6.x for >= glibc-2.20, but since the lowest gcc we support after this change is >= 4.8.5, this condition can go away. Patches for older gcc versions are removed in the next commit. This closes #222 Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-23uClibc: Add kconfig option to enable IPv6 supportBryan Hundven1-0/+6
This commit adds a kconfig option to enable IPv6 support. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-16uClibc-ng: Fix version promptBryan Hundven1-1/+1
In commit c9704c6683ee2ddab8be390f48f6c2de412b80dc, I forgot to bump the version in the prompt for uClibc-ng-1.0.9. Reported-by: Reinoud Koornstra <reinoudkoornstra@gmail.com> Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-15uClibc-ng: Update to uClibc-ng-1.0.9Bryan Hundven1-4/+4
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-13Merge pull request #239 from diorcety-ctng/cc-cygwin-mingw-linuxBryan Hundven1-0/+1
Canadian cross build = x86_64 Cygwin host = x86_64 MinGW_W64 target = x86_64 GNU/Linux
2015-11-13Add gettext and libiconv as companion libsRay Donnelly1-0/+1
.. they're needed for the RPC generation in glibc on both Cygwin and MinGW-w64. Neither are built on GNU/Linux and iconv is not built on Darwin. Two patches for gettext are needed, one so that -O0 works and one so that static builds can be made. They can take a good while to build, so if not needed for_host or for_build then they are not built. Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
2015-11-13uClibc: Fall back to default configs if not providedBryan Hundven1-2/+2
I've added the .config files to contrib/uClibc-defconfigs from buildroot to use as default configs if they are not provided in the sample. If a particular architecture really needs an option set, it should be either updated in the manange_uClibc_config function in scripts/build/libc/uClibc.sh or a custom ${uclibc_name}.config should be added to the sample (usually via `ct-ng saveconfig`). Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-13uClibc: Add support for uClibc-ngBryan Hundven2-0/+19
This commit adds uClibc-ng 1.0.8. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-11uClibc: Reduce supported versionsBryan Hundven1-64/+4
This commit reduces the number of supported versions to: * 0.9.33.2 * custom location Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-11Support mingw-w64 in addToolVersion.sh.Alexey Neyman1-4/+9
... and add 4.0.4 release. Signed-off-by: Alexey Neyman <stilor@att.net>
2015-11-10blackfin: Remove blackfin supportBryan Hundven1-1/+1
This commit removes blackfin support. I'm open to re-adding blackfin after crosstool-1.23.0 is released, but it is currently too difficult to port forward to newer versions of gcc and uclibc. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-10-31gcc: Support only the latest branch releases of gccBryan Hundven1-13/+0
This change, as per #222, reduces the number of supported releases of gcc to the latest branch releases. I noticed while doing this work that gcc-4.5.4 was never added, so I moved patches for gcc-4.5.3 to 4.5.4 and updated the bfin-unknown-linux-uclibc example. Also, 120-siginfo.patch was fixed upstream in the 4.5.4 release, so this patch is omitted. I also bumped the avr sample to 4.9.3 from 4.9.2. With the addition of gcc-5.x, the gcc release team now releases the major.minor.0 versions, while updates to the branch are available in svn/git. We'll address that when we get to issue #219. This change just removes CC_GCC_5_1 and moves CC_GCC_5_2 to CC_GCC_5, and removes CC_GCC_5_1_or_later and moves CC_GCC_5_2_or_later to CC_GCC_5_or_later. This is the first of two part changes, as mentioned in #222. This change is slated for release in 1.22.0. The next change will be slated for 1.23.0, and will limit gcc versions to what is on https://gcc.gnu.org under "Release Series and Status", which is currently 4.9.3 and 5.2.0, although I will also support the previous supported version. In this example that would be 4.8.5. Last, but not least, this change also retires AVR32 support. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-10-20musl-libc: update musl-libc mainline to 1.1.12Bryan Hundven1-2/+2
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-09-14Added additional newlib specific target flags with new optionJasmin Jessich1-0/+14
LIBC_NEWLIB_TARGET_CFLAGS. Signed-off-by: Jasmin Jessich <jasmin@anw.at>
2015-09-03LIBC_NEWLIB_CUSTOM is no longer part of the newlib version choice, but anJasmin Jessich1-2/+35
independend configuration to enable LIBC_NEWLIB_CUSTOM. All newlib versions >=2.0.0 does provide __cxa_atexit. To enable this function in GCC, all versions >=2.0.0 does now select LIBC_PROVIDES_CXA_ATEXIT. Signed-off-by: Jasmin Jessich <jasmin@anw.at>
2015-09-02glibc: Fix applying addons to glibc => 2.17Bryan Hundven1-0/+9
glibc-2.17 and above no longer have external addons or ports. So if we are => 2.17, don't even think about trying to mess with ports or addons. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-09-02musl: Update mainline to 1.1.11Bryan Hundven1-2/+2
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-09-02glibc: Add 2.22, and add a constraint on glibc >= 2.21Bryan Hundven1-1/+12
* Add glibc 2.22 * Add a constraint on glibc-2.21 that depends on gcc-4.6 or greater. See: https://sourceware.org/ml/libc-alpha/2015-02/msg00119.html ====================================================================== * The minimum GCC version that can be used to build this version of the GNU C Library is GCC 4.6. Older GCC versions, and non-GNU compilers, can still be used to compile programs using the GNU C Library. ====================================================================== Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-06-21avr-libc: add support for avr-libc C libraryErico Nunes2-0/+59
This commit adds support for the avr-libc C library. According to the project page at http://www.nongnu.org/avr-libc , the avr-libc package provides a subset of the standard C library for Atmel AVR 8-bit RISC microcontrollers. In addition, the library provides the basic startup code needed by most applications. Support for this library in crosstool-ng is only enabled for the AVR 8-bit target. The avr-libc manual and most distributions build the AVR 8-bit gcc toolchain with the "avr" (non-canonical) target. Some experimentation also led to the conclusion that other (canonical) targets are not very well supported, so we force the "avr" target for crosstool-ng as well. The manual also recommends building avr-libc after the final gcc build. To accomplish this with crosstool-ng, a new do_libc_post_cc step is added, in which currently only avr-libc performs its build, and is a no-op for the other libc options. Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
2015-06-02musl: Update versionsBryan Hundven1-6/+6
This commit updates the version knobs so that oldconfig does the right thing when we bump versions. Also, we update stable to 1.0.5 and experimental to 1.1.9. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-05-16mingw: WINAPI_V_DEVEL should depend on EXPERIMENTALBryan Hundven1-0/+1
While we do want users to be able to use the mingw from git, being under the experimental umbrella makes it more obvious that this should not be used as a production toolchain. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-05-12mingw-w64: Add 'devel' version to use git 'master' branchRay Donnelly1-0/+5
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
2015-05-12mingw-w64: Add updated versionsRay Donnelly1-0/+31
Specifically: 2.0.8 3.0.0, 3.1.0 4.0.0, 4.0.1, 4.0.2 Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
2015-05-02config: Add binutils, newlib, and glibc linaro configurationBryan Hundven2-0/+37
This commit introduces a "show linaro versions" for newlib, binutils, and glibc. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-04-30config: remove eglibc.inBryan Hundven1-240/+0
In commit cd47c091ba6f7d6d9a98c85fc5729a434c99d4ea I had forgot to also remove the config/libc/eglibc.in. This commit removes it. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-04-25Merge pull request #46 from stefanct/masterBryan Hundven1-1/+7
Add glibc 2.21
2015-02-07Add glibc 2.21Stefan Tauner1-1/+7
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
2015-01-28eglibc: Remove eglibc supportBryan Hundven3-270/+267
As posted on http://www.eglibc.org/ ==================== EGLIBC is no longer developed and such goals are now being addressed directly in GLIBC. ==================== I'm not interested in maintaining build support for unsupported software. Older branches of crosstool-ng continue to have eglibc support. If you find issues with older branches, I'm always open to pull requests. Removing eglibc also frees up glibc cleanup and build optimization. Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-01-16libc: newlib: Add NewLib 2.2.0, Linaro NewLib 2.2.0-2015.01 and 2.1.0-2014.09Cristoforo Cataldo1-4/+17
This commit allows to choose, download and build latest NewLib: - newlib-2.2.0 - newlib-linaro-2.2.0-2015.01 - newlib-linaro-2.1.0-2014.09 Signed-off-by: Cristoforo Cataldo <cristoforo.cataldo@gmail.com>
2015-01-16libc: glibc: Add Linaro GLibc 2.20-2014.11Cristoforo Cataldo1-0/+6
This commit allows to choose, download and build latest Linaro GLibC: - glibc-linaro-2.20-2014.11 Signed-off-by: Cristoforo Cataldo <cristoforo.cataldo@gmail.com>
2015-01-16libc: eglibc: Add Linaro EGLibc 2.19-2014.08Cristoforo Cataldo1-0/+6
This commit allows to choose, download and build latest Linaro EGLibC: - eglibc-linaro-2.19-2014.08 Signed-off-by: Cristoforo Cataldo <cristoforo.cataldo@gmail.com>
2014-12-16Merge pull request #13 from davidholsgrove/newlib_canadianBryan Hundven1-1/+2
libc/newlib: Canadian baremetal builds require core pass-1
2014-12-15Merge pull request #6 from davidholsgrove/libc_custom_locationBryan Hundven2-0/+48
Libc custom location
2014-12-15libc/newlib: Canadian baremetal builds require core pass-1David Holsgrove1-1/+2
Can safely skip the core pass-1 for normal baremetal builds, but when building a canadian baremetal, the repair_cc functionality (GCC_FOR_TARGET) in gcc.sh will force the core pass-2 to attempt to build gcc and libgcc without a ${CT_TARGET}-gcc existing, causing a failure on ${CT_TARGET}-gcc -dumpspecs > tmp-specs Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
2014-12-10config/glibc: Disable ports/ for 2.20Bryan Hundven1-0/+2
As per the glibc release notes for 2.20: -------------------------------------------------------------------------------- All supported architectures now use the main glibc sysdeps directory instead of some being in a separate "ports" directory (which was distributed separately before glibc 2.17). -------------------------------------------------------------------------------- There isn't a ports directory anymore. So disable using and forcing it. closes #7 on crosstool-ng github Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
generated by cgit v0.10.2-6-g49f6 at 2024-05-09 19:53:41 (GMT)