summaryrefslogtreecommitdiff
path: root/scripts/build/libc
AgeCommit message (Collapse)AuthorFilesLines
2017-03-07Merge pull request #635 from stilor/macos-skip-localesAlexey Neyman1-1/+1
Skip locales on macos
2017-03-07Merge pull request #627 from dankm/freebsdAlexey Neyman1-1/+13
FreeBSD build support
2017-03-07Skip building locales on macos, tooAlexey Neyman1-1/+1
--enable-hacker-mode is not sufficient, in 2.25 configure then fails while checking for sysdeps fragments that apply to a given configuration, and with that worked around, fails on binutils & compiler version check. In brief: if someone wants locales on cygwin/macos, you'd have to implement cross-localedef (similar to cross-rpcgen) in glibc and submit it upstream. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-03-04Do not pretend we're downloading anythingAlexey Neyman1-3/+1
... when we're actually don't. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-03-02glibc: hide native c++ executable from buildDan McGregor1-0/+4
If glibc's configure finds the host c++ executable it assumes that c++ should be enabled for the build. In case we don't have cross g++ built yet (ie, for headers), this causes the build to fail creating C++ headers. So hide C++ from the build. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
2017-03-02Bring in FreeBSD supportDan McGregor1-1/+9
Check for FreeBSD specific issues, it is mostly the same as Darwin. Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
2017-03-01Merge pull request #625 from stilor/skip-localedefAlexey Neyman1-0/+9
Skip localedef
2017-03-01Skip locale build on CygwinAlexey Neyman1-0/+9
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-03-01Avoid -T, it is not available on macosAlexey Neyman1-3/+1
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-02-27Revert "Determine whether -E/-r option selects extended regexp"Alexey Neyman1-3/+3
This reverts commit 7bcf18bfab84374d3305c7a088f95ac1219ddf93.
2017-02-14Determine whether -E/-r option selects extended regexpAlexey Neyman1-3/+3
... and then use the right option. See the note in scripts/functions on where we should use ${foo} and where just 'foo'; this boils down to whether we can expect the build tools override to be in effect (e.g. in the actual build scripts) or not (i.e. outside of scripts/build). While running in scripts/functions, or in scripts/crosstool-NG.sh the build tools override directory (.build/tools/bin) may have not been set up (yet, or at all). Also, modify the installed scripts (populate, xldd) accordingly. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-02-10External addons supported by glibc even nowAlexey Neyman1-27/+24
... though none are provided by default. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-02-10Revert "glibc: Remove support for downloading and extracting add-ons"Alexey Neyman1-0/+67
This reverts commit 39273e0843cc5f7f91d50651b299a0472f59f472.
2017-02-05Use 'make olddefconfig' in uClibc/uClibc-ng configurationAlexey Neyman1-1/+1
instead of 'make oldconfig' and responding 'y'. This avoids 'Broken pipe' errors in the log, as well as selects default setting for all options not explicitly set. This requires a small fix in the old uClibc. Won't have to maintain that fix for long though :) Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-30Fix location where libc manual is builtAlexey Neyman1-2/+2
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-26Create <sgidefs.h> if MUSL doesn't create oneAlexey Neyman1-0/+3
Document the status quo and work around for mips-musl. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-25Run all configure scripts using ${CONFIG_SHELL}Alexey Neyman5-0/+8
... as its help message says in menuconfig. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-24Merge pull request #552 from stilor/uclibc-ng-for-buildrootAlexey Neyman1-0/+7
Restore uClibc-ng usability in buildroot
2017-01-23Add selection for RPCAlexey Neyman1-0/+7
So that uClibc config can be matched to Buildroot's expectations via the menu, without the need for a saved config. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-22mingw: compile the mingw-w64 companion tools as wellLi-Hang Lin1-0/+30
There are some useful tools such as widl, gendef, genidl ... etc. provided by mingw-w64 and do not waste the developers' works. Signed-off-by: Li-Hang Lin <lihang.lin@gmail.com>
2017-01-14Use ${CT_CC} instead of gcc ...Alexey Neyman3-9/+9
... when refering to target's compiler. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-14Merge pull request #526 from stilor/double-includeAlexey Neyman1-7/+1
Avoid creating include/include
2017-01-13Unify fetching Linaro components.Alexey Neyman2-20/+22
Add CT_GetLinaro, use it from gcc/binutils/gdb/glibc/newlib. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-13AVR32 support has been retired.Alexey Neyman1-4/+0
Scripts no longer download avr-headers. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-13install_root has no effect on newlib install.Alexey Neyman1-1/+1
And never had, at least since newlib 1.17 (first version added to crosstool-ng). Apparently, copy-pasted from glibc.sh. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-13Remove 2nd copy of the option.Alexey Neyman1-2/+0
Added above, as part of the list. Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-11Merge pull request #519 from InfernoEmbedded/newlib-enhancementsAlexey Neyman1-26/+46
Newlib enhancements
2017-01-10Darwin needs -liconv when building glibc.Alexey Neyman1-7/+2
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-10Avoid trampling user's LDFLAGS_FOR_HOST...Alexey Neyman1-7/+11
... by passing BUILD_LDFLAGS twice (the 2nd argument overrides the first). Also, no need to pass -I/-L for BUILD_CFLAGS/LDFLAGS, they are already included by crosstool-NG.sh (but keep for BUILD_CPPFLAGS, as we set it up here). Remove -Wl,-Bstatic/-Wl,-Bdynamic (we only build static complibs). Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-09Support building Newlib with Link Time OptimisationAlastair D'Silva1-10/+13
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
2017-01-09Add more newlib optionsAlastair D'Silva1-16/+33
2016-12-02Fix use of custom location if it is a directory.Alexey Neyman2-2/+2
In that case, CT_GetCustom just creates a symlink to the original. In that case, 'cp -a <path> .' gives an error and 'cp -a <path> <newdir>' creates <newdir> as a symlink (which will then run the build inside the shared directory, .build/src/<package>). Signed-off-by: Alexey Neyman <stilor@att.net>
2016-11-21Partially revert 6f8e89cb5ca061e899bf3feaaf3fecf30d366c3e.Alexey Neyman6-41/+41
The referenced commit replaced 'make' with '${make}' everywhere. This is wrong for at least the utilities that we may build as companion tools (make, libtool): this will always invoke the version detected by configure by supplying the absolute path. In other words, the wrappers in .build/tools/bin are not fallbacks - they are either temporary (in case a respective companion tool is built) or permanent redirectors. This is the reason why the PATH= has .build/*/buildtools/bin at higher precedence than .build/tools/bin; the latter has the versions detected by configure and the former has the versions built as companion tools. Revert the rest of the gang (grep/sed/...) for consistency. After all, we may decide to supply some of them as well (awk, for instance). Signed-off-by: Alexey Neyman <stilor@att.net>
2016-11-11Merge remote-tracking branch 'upstream/master'Dmitry Pankratov2-1/+7
2016-10-24Merge branch 'master' into janitorialBryan Hundven1-0/+5
2016-10-05Fix m68k with uClibc-ng >= 1.0.15.Alexey Neyman1-0/+5
1.0.15 only kept a single LINUXTHREADS option, and renamed it, making it no longer option-compatible with uClibc. The option for "1.0.14 or later" version of uClibc-ng is not currently used; rename it to "1.0.15 or later" and use it to handle newer uClibc-ng's linuxthreads. m68k happens to be the only sample using linuxthreads. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-10-01Merge branch 'master' of https://github.com/crosstool-ng/crosstool-ngDmitry Pankratov7-550/+435
2016-09-14build/glibc: Improve confusing commentKirill K. Smirnov1-1/+2
Up until cset 4e2227e8a5537a8553c503e55d2cb2190f2a0d2f there was an 'if' statement with a comment. The abovementioned changeset removed the conditional statement but the comment survived. Signed-off-by: Kirill K. Smirnov <kirill.k.smirnov@gmail.com>
2016-08-29uClibc: propagate SHARED_LIBS option.Kirill K. Smirnov1-0/+6
This patch synchronizes crosstool CT_SHARED_LIBS and uclibc HAVE_SHARED options. Signed-off-by: Kirill K. Smirnov <kirill.k.smirnov@gmail.com>
2016-08-29uClibc: install native utilsKirill K. Smirnov1-1/+1
This change adds native ldd and ldconfig utils to sysroot. For glibc just 'make install' installs everything including utils. For uclibc there exists a separate goal 'install_utils'. Make it. Signed-off-by: Kirill K. Smirnov <kirill.k.smirnov@gmail.com>
2016-08-23musl: Add multilib support.Alexey Neyman2-36/+59
Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23uClibc: move ldso check to post_cc.Alexey Neyman1-43/+54
It turns out that core GCC on binfmt architectures (m68k, for example) cannot produce the final executable (looks for ld.real in the wrong place). Need to wait for the final gcc to become available. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23Support multilib in sh/uClibc.Alexey Neyman2-188/+59
Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23Treat multiroots differently.Alexey Neyman2-17/+83
'ld' does not search for dependency libraries in multi_os_directory, so if there's both multi_os_directory and multi_root, and there is only one configuration in each multi_root, forgo the multi_os_directory suffix. Needed for sh4-multilib-linux-uclibc. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23First stab at multilib/uClibc.Alexey Neyman1-14/+130
Create a separate 'libc_backend_once', install headers into a subdirectory (different sets of headers are installed for 32- and 64-bit architectures), and create a symlink for the dynamic linker location expected by GCC. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23uClibc: Split configuration tweaker into per-arch functions.Alexey Neyman1-113/+17
Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23Change multilib functions to set the variable.Alexey Neyman1-2/+3
Rather than echo-ing the new value, set the value into the variable with the name passed as an argument (similar to CT_SanitizeVarDir). This allows to use CT_DoLog in these functions. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23libc/*.sh: Deprecate libc_check_config step.Alexey Neyman7-71/+10
This step was only used in uClibc. However, with upcoming multilib, the config management will have to be done for each variant differently, anyway. uClibc was the only user of libc_check_config step, as well as CT_CONFIG_DIR directory. Retire these. Two other clean-ups in uClibc.sh: - KERNEL_HEADERS check seems to be bogus, this config option is not present even in 0.9.30 - which is not supported already. - SHARED_LIB_LOADER_PREFIX was renamed to MULTILIB_DIR in 0.9.31, according to ChangeLog - and MULTILIB_DIR is passed from command line instead. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23uclibc: merge startfiles/final into single backend.Alexey Neyman1-160/+109
In preparation for multilib support, use the same "backend" model that is already employed by glibc and musl. Also, the verbosity setting descriptions were swapped. V=2 is actually less verbose than V=1: V=1 prints full commands, while V=2 prints 'CC <file> <defines>'. Signed-off-by: Alexey Neyman <stilor@att.net>
2016-08-23uClibc.sh: typo, local -> locale.Alexey Neyman1-13/+13
Signed-off-by: Alexey Neyman <stilor@att.net>
generated by cgit v0.10.2-6-g49f6 at 2024-05-16 17:53:42 (GMT)