From 4ae10919c1bf696d36448c082a492e6c49ef93c8 Mon Sep 17 00:00:00 2001
From: "Yann E. MORIN\"" <yann.morin.1998@anciens.enib.fr>
Date: Sat, 11 Sep 2010 12:42:22 +0200
Subject: arch/arm: move config-options to second-part

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

diff --git a/config/arch/arm.in b/config/arch/arm.in
index 4883d22..08bf89e 100644
--- a/config/arch/arm.in
+++ b/config/arch/arm.in
@@ -14,55 +14,3 @@ config ARCH_arm
     help
       The ARM architecture, as defined by:
         http://www.arm.com/
-
-config ARCH_ARM_MODE
-    string
-    default "arm"   if ARCH_ARM_MODE_ARM
-    default "thumb" if ARCH_ARM_MODE_THUMB
-
-choice
-    bool
-    prompt "Default instruction set mode"
-    default ARCH_ARM_MODE_ARM
-
-config ARCH_ARM_MODE_ARM
-    bool
-    prompt "arm"
-    help
-      Defaults to emitting instructions in the ARM mode.
-
-config ARCH_ARM_MODE_THUMB
-    bool
-    prompt "thumb (EXPERIMENTAL)"
-    depends on EXPERIMENTAL
-    help
-      Defaults to emitting instructions in the THUMB mode.
-
-endchoice
-
-config ARCH_ARM_INTERWORKING
-    bool
-    prompt "Use Thumb-interworking (READ HELP)"
-    default n
-    depends on EXPERIMENTAL
-    help
-      Excerpt from the gcc manual:
-      
-      > Generate code which supports calling between the ARM and Thumb
-      > instruction sets. Without this option the two instruction sets
-      > cannot be reliably used inside one program. The default is
-      > [not to use interwork], since slightly larger code is generated
-      > when [interwork] is specified.
-
-config ARCH_ARM_EABI
-    bool
-    prompt "Use EABI"
-    default y
-    help
-      Set up the toolchain so that it generates EABI-compliant binaries.
-
-config ARCH_ARM_ABI_OK
-    bool
-    default y
-    depends on ! ARCH_ARM_EABI
-    select ARCH_SUPPORT_ABI
diff --git a/config/arch/arm.in.2 b/config/arch/arm.in.2
new file mode 100644
index 0000000..945b221
--- /dev/null
+++ b/config/arch/arm.in.2
@@ -0,0 +1,53 @@
+# ARM specific configuration file
+
+config ARCH_ARM_MODE
+    string
+    default "arm"   if ARCH_ARM_MODE_ARM
+    default "thumb" if ARCH_ARM_MODE_THUMB
+
+choice
+    bool
+    prompt "Default instruction set mode"
+    default ARCH_ARM_MODE_ARM
+
+config ARCH_ARM_MODE_ARM
+    bool
+    prompt "arm"
+    help
+      Defaults to emitting instructions in the ARM mode.
+
+config ARCH_ARM_MODE_THUMB
+    bool
+    prompt "thumb (EXPERIMENTAL)"
+    depends on EXPERIMENTAL
+    help
+      Defaults to emitting instructions in the THUMB mode.
+
+endchoice
+
+config ARCH_ARM_INTERWORKING
+    bool
+    prompt "Use Thumb-interworking (READ HELP)"
+    default n
+    depends on EXPERIMENTAL
+    help
+      Excerpt from the gcc manual:
+      
+      > Generate code which supports calling between the ARM and Thumb
+      > instruction sets. Without this option the two instruction sets
+      > cannot be reliably used inside one program. The default is
+      > [not to use interwork], since slightly larger code is generated
+      > when [interwork] is specified.
+
+config ARCH_ARM_EABI
+    bool
+    prompt "Use EABI"
+    default y
+    help
+      Set up the toolchain so that it generates EABI-compliant binaries.
+
+config ARCH_ARM_ABI_OK
+    bool
+    default y
+    depends on ! ARCH_ARM_EABI
+    select ARCH_SUPPORT_ABI
-- 
cgit v0.10.2-6-g49f6