From afe990251bd9b3a063f03da31a3b8d139d033bc3 Mon Sep 17 00:00:00 2001 From: ian Date: Sat, 1 Jun 2013 00:20:49 +0000 Subject: [PATCH] PR other/56780 * libiberty/configure.ac: Move test for --enable-install-libiberty outside of the 'with_target_subdir' test so that it actually gets run. Add output messages to show the test result. * libiberty/configure: Regenerate. * libiberty/Makefile.in (install_to_libdir): Place the installation of the libiberty library in the same guard as that used for the headers to prevent it being installed unless requested via --enable-install-libiberty. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@199570 138bc75d-0d04-0410-961f-82ee72b054a4 libiberty: fix --enable-install-libiberty flag [PR 56780] Commit 199570 fixed the --disable-install-libiberty behavior, but it also added a bug where the enable path never works because the initial clear of target_header_dir wasn't deleted. So we end up initializing properly at the top only to reset it at the end all the time. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206367 138bc75d-0d04-0410-961f-82ee72b054a4 [Romain squash the two upstream commits Remove the ChangeLog] Signed-off-by: Romain Naour --- libiberty/Makefile.in | 24 ++++++++++---------- libiberty/configure | 57 ++++++++++++++++++++++++++----------------------- libiberty/configure.ac | 47 +++++++++++++++++++++------------------- 3 files changed, 68 insertions(+), 60 deletions(-) --- a/libiberty/Makefile.in +++ b/libiberty/Makefile.in @@ -355,19 +355,19 @@ # since it will be passed the multilib flags. MULTIOSDIR = `$(CC) $(CFLAGS) -print-multi-os-directory` install_to_libdir: all - ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR) - $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n - ( cd $(DESTDIR)$(libdir)/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n ;$(RANLIB) $(TARGETLIB)n ) - mv -f $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB) if test -n "${target_header_dir}"; then \ - case "${target_header_dir}" in \ - /*) thd=${target_header_dir};; \ - *) thd=${includedir}/${target_header_dir};; \ - esac; \ - ${mkinstalldirs} $(DESTDIR)$${thd}; \ - for h in ${INSTALLED_HEADERS}; do \ - ${INSTALL_DATA} $$h $(DESTDIR)$${thd}; \ - done; \ + ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR); \ + $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n; \ + ( cd $(DESTDIR)$(libdir)/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n ;$(RANLIB) $(TARGETLIB)n ); \ + mv -f $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB); \ + case "${target_header_dir}" in \ + /*) thd=${target_header_dir};; \ + *) thd=${includedir}/${target_header_dir};; \ + esac; \ + ${mkinstalldirs} $(DESTDIR)$${thd}; \ + for h in ${INSTALLED_HEADERS}; do \ + ${INSTALL_DATA} $$h $(DESTDIR)$${thd}; \ + done; \ fi @$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install --- a/libiberty/configure +++ b/libiberty/configure @@ -675,8 +675,8 @@ with_newlib enable_maintainer_mode enable_multilib -enable_largefile enable_install_libiberty +enable_largefile ' ac_precious_vars='build_alias host_alias @@ -1303,8 +1303,8 @@ enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --enable-multilib build many library versions (default) + --enable-install-libiberty Install headers and library for end users --disable-largefile omit support for large files - --enable-install-libiberty Install headers for end users Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -2784,6 +2784,35 @@ cross_compiling=maybe fi +# We may wish to install the target headers somewhere. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to install libiberty headers and static library" >&5 +$as_echo_n "checking whether to install libiberty headers and static library... " >&6; } + +# Check whether --enable-install-libiberty was given. +if test "${enable_install_libiberty+set}" = set; then : + enableval=$enable_install_libiberty; enable_install_libiberty=$enableval +else + enable_install_libiberty=no +fi + +# Option parsed, now set things appropriately. +case x"$enable_install_libiberty" in + xyes|x) + target_header_dir=libiberty + ;; + xno) + target_header_dir= + ;; + *) + # This could be sanity-checked in various ways... + target_header_dir="${enable_install_libiberty}" + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_install_libiberty" >&5 +$as_echo "$enable_install_libiberty" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: target_header_dir = $target_header_dir" >&5 +$as_echo "$as_me: target_header_dir = $target_header_dir" >&6;} + ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -5476,7 +5505,6 @@ setobjs= CHECK= -target_header_dir= if test -n "${with_target_subdir}"; then # We are being configured as a target library. AC_REPLACE_FUNCS @@ -5759,29 +5787,6 @@ esac - # We may wish to install the target headers somewhere. - # Check whether --enable-install-libiberty was given. -if test "${enable_install_libiberty+set}" = set; then : - enableval=$enable_install_libiberty; enable_install_libiberty=$enableval -else - enable_install_libiberty=no -fi - - # Option parsed, now set things appropriately. - case x"$enable_install_libiberty" in - xyes|x) - target_header_dir=libiberty - ;; - xno) - target_header_dir= - ;; - *) - # This could be sanity-checked in various ways... - target_header_dir="${enable_install_libiberty}" - ;; - esac - - else # Not a target library, so we set things up to run the test suite. --- a/libiberty/configure.ac +++ b/libiberty/configure.ac @@ -128,6 +128,31 @@ cross_compiling=maybe fi +# We may wish to install the target headers somewhere. +AC_MSG_CHECKING([whether to install libiberty headers and static library]) +dnl install-libiberty is disabled by default + +AC_ARG_ENABLE(install-libiberty, +[ --enable-install-libiberty Install headers and library for end users], +enable_install_libiberty=$enableval, +enable_install_libiberty=no)dnl + +# Option parsed, now set things appropriately. +case x"$enable_install_libiberty" in + xyes|x) + target_header_dir=libiberty + ;; + xno) + target_header_dir= + ;; + *) + # This could be sanity-checked in various ways... + target_header_dir="${enable_install_libiberty}" + ;; +esac +AC_MSG_RESULT($enable_install_libiberty) +AC_MSG_NOTICE([target_header_dir = $target_header_dir]) + GCC_NO_EXECUTABLES AC_PROG_CC AC_SYS_LARGEFILE @@ -380,7 +405,6 @@ setobjs= CHECK= -target_header_dir= if test -n "${with_target_subdir}"; then # We are being configured as a target library. AC_REPLACE_FUNCS @@ -492,27 +516,6 @@ esac - # We may wish to install the target headers somewhere. - AC_ARG_ENABLE(install-libiberty, - [ --enable-install-libiberty Install headers for end users], - enable_install_libiberty=$enableval, - enable_install_libiberty=no)dnl - - # Option parsed, now set things appropriately. - case x"$enable_install_libiberty" in - xyes|x) - target_header_dir=libiberty - ;; - xno) - target_header_dir= - ;; - *) - # This could be sanity-checked in various ways... - target_header_dir="${enable_install_libiberty}" - ;; - esac - - else # Not a target library, so we set things up to run the test suite.