From 6d852ffb43b111a39162135c95249e749c4e285b Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Thu, 6 Aug 2015 01:16:02 +0300 Subject: [PATCH] xtensa: add -mauto-litpools option With support from assembler this option allows compiling huge functions, where single literal pool at the beginning of a function may not be reachable by L32R instructions at its end. Currently assembler --auto-litpools option cannot deal with literals used from multiple locations separated by more than 256 KBytes of code. Don't turn constants into literals, instead use MOVI instruction to load them into registers and let the assembler turn them into literals as necessary. 2015-08-12 Max Filippov gcc/ * config/xtensa/constraints.md (define_constraint "Y"): New constraint. * config/xtensa/elf.h (ASM_SPEC): Add m(no-)auto-litpools. * config/xtensa/linux.h (ASM_SPEC): Likewise. * config/xtensa/predicates.md (move_operand): Match constants and symbols in the presence of TARGET_AUTO_LITPOOLS. * config/xtensa/xtensa.c (xtensa_valid_move): Don't allow immediate references to TLS data. (xtensa_emit_move_sequence): Don't force constants to memory in the presence of TARGET_AUTO_LITPOOLS. (print_operand): Add 'y' format, same as default, but capable of printing SF mode constants as well. * config/xtensa/xtensa.md (movsi_internal, movhi_internal) (movsf_internal): Add movi pattern that loads literal. (movsf, movdf): Don't force constants to memory in the presence of TARGET_AUTO_LITPOOLS. (movdf_internal): Add 'Y' constraint. * config/xtensa/xtensa.opt (mauto-litpools): New option. Signed-off-by: Max Filippov --- Backported from: r226828 Changes to ChangeLogs and documentation are dropped. gcc/config/xtensa/constraints.md | 5 +++++ gcc/config/xtensa/elf.h | 4 +++- gcc/config/xtensa/linux.h | 4 +++- gcc/config/xtensa/predicates.md | 3 ++- gcc/config/xtensa/xtensa.c | 19 ++++++++++++++++++- gcc/config/xtensa/xtensa.md | 35 +++++++++++++++++++---------------- gcc/config/xtensa/xtensa.opt | 4 ++++ 7 files changed, 54 insertions(+), 20 deletions(-) --- a/gcc/config/xtensa/constraints.md +++ b/gcc/config/xtensa/constraints.md @@ -111,6 +111,11 @@ (and (match_code "const_int") (match_test "xtensa_mask_immediate (ival)"))) +(define_constraint "Y" + "A constant that can be used in relaxed MOVI instructions." + (and (match_code "const_int,const_double,const,symbol_ref,label_ref") + (match_test "TARGET_AUTO_LITPOOLS"))) + ;; Memory constraints. Do not use define_memory_constraint here. Doing so ;; causes reload to force some constants into the constant pool, but since ;; the Xtensa constant pool can only be accessed with L32R instructions, it --- a/gcc/config/xtensa/elf.h +++ b/gcc/config/xtensa/elf.h @@ -48,7 +48,9 @@ %{mtarget-align:--target-align} \ %{mno-target-align:--no-target-align} \ %{mlongcalls:--longcalls} \ - %{mno-longcalls:--no-longcalls}" + %{mno-longcalls:--no-longcalls} \ + %{mauto-litpools:--auto-litpools} \ + %{mno-auto-litpools:--no-auto-litpools}" #undef LIB_SPEC #define LIB_SPEC "-lc -lsim -lc -lhandlers-sim -lhal" --- a/gcc/config/xtensa/linux.h +++ b/gcc/config/xtensa/linux.h @@ -42,7 +42,9 @@ %{mtarget-align:--target-align} \ %{mno-target-align:--no-target-align} \ %{mlongcalls:--longcalls} \ - %{mno-longcalls:--no-longcalls}" + %{mno-longcalls:--no-longcalls} \ + %{mauto-litpools:--auto-litpools} \ + %{mno-auto-litpools:--no-auto-litpools}" #define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1" --- a/gcc/config/xtensa/predicates.md +++ b/gcc/config/xtensa/predicates.md @@ -142,7 +142,8 @@ (match_test "GET_MODE_CLASS (mode) == MODE_INT && xtensa_simm12b (INTVAL (op))")) (and (match_code "const_int,const_double,const,symbol_ref,label_ref") - (match_test "TARGET_CONST16 && CONSTANT_P (op) + (match_test "(TARGET_CONST16 || TARGET_AUTO_LITPOOLS) + && CONSTANT_P (op) && GET_MODE_SIZE (mode) % UNITS_PER_WORD == 0"))))) ;; Accept the floating point constant 1 in the appropriate mode. --- a/gcc/config/xtensa/xtensa.c +++ b/gcc/config/xtensa/xtensa.c @@ -477,6 +477,9 @@ { int dst_regnum = xt_true_regnum (operands[0]); + if (xtensa_tls_referenced_p (operands[1])) + return FALSE; + /* The stack pointer can only be assigned with a MOVSP opcode. */ if (dst_regnum == STACK_POINTER_REGNUM) return (mode == SImode @@ -1044,7 +1047,7 @@ return 1; } - if (! TARGET_CONST16) + if (! TARGET_AUTO_LITPOOLS && ! TARGET_CONST16) { src = force_const_mem (SImode, src); operands[1] = src; @@ -2428,6 +2431,20 @@ } break; + case 'y': + if (GET_CODE (x) == CONST_DOUBLE && + GET_MODE (x) == SFmode) + { + REAL_VALUE_TYPE r; + long l; + REAL_VALUE_FROM_CONST_DOUBLE (r, x); + REAL_VALUE_TO_TARGET_SINGLE (r, l); + fprintf (file, "0x%08lx", l); + break; + } + + /* fall through */ + default: if (GET_CODE (x) == REG || GET_CODE (x) == SUBREG) fprintf (file, "%s", reg_names[xt_true_regnum (x)]); --- a/gcc/config/xtensa/xtensa.md +++ b/gcc/config/xtensa/xtensa.md @@ -799,8 +799,8 @@ }) (define_insn "movsi_internal" - [(set (match_operand:SI 0 "nonimmed_operand" "=D,D,D,D,R,R,a,q,a,W,a,a,U,*a,*A") - (match_operand:SI 1 "move_operand" "M,D,d,R,D,d,r,r,I,i,T,U,r,*A,*r"))] + [(set (match_operand:SI 0 "nonimmed_operand" "=D,D,D,D,R,R,a,q,a,a,W,a,a,U,*a,*A") + (match_operand:SI 1 "move_operand" "M,D,d,R,D,d,r,r,I,Y,i,T,U,r,*A,*r"))] "xtensa_valid_move (SImode, operands)" "@ movi.n\t%0, %x1 @@ -812,15 +812,16 @@ mov\t%0, %1 movsp\t%0, %1 movi\t%0, %x1 + movi\t%0, %1 const16\t%0, %t1\;const16\t%0, %b1 %v1l32r\t%0, %1 %v1l32i\t%0, %1 %v0s32i\t%1, %0 rsr\t%0, ACCLO wsr\t%1, ACCLO" - [(set_attr "type" "move,move,move,load,store,store,move,move,move,move,load,load,store,rsr,wsr") + [(set_attr "type" "move,move,move,load,store,store,move,move,move,move,move,load,load,store,rsr,wsr") (set_attr "mode" "SI") - (set_attr "length" "2,2,2,2,2,2,3,3,3,6,3,3,3,3,3")]) + (set_attr "length" "2,2,2,2,2,2,3,3,3,3,6,3,3,3,3,3")]) ;; 16-bit Integer moves @@ -834,21 +835,22 @@ }) (define_insn "movhi_internal" - [(set (match_operand:HI 0 "nonimmed_operand" "=D,D,a,a,a,U,*a,*A") - (match_operand:HI 1 "move_operand" "M,d,r,I,U,r,*A,*r"))] + [(set (match_operand:HI 0 "nonimmed_operand" "=D,D,a,a,a,a,U,*a,*A") + (match_operand:HI 1 "move_operand" "M,d,r,I,Y,U,r,*A,*r"))] "xtensa_valid_move (HImode, operands)" "@ movi.n\t%0, %x1 mov.n\t%0, %1 mov\t%0, %1 movi\t%0, %x1 + movi\t%0, %1 %v1l16ui\t%0, %1 %v0s16i\t%1, %0 rsr\t%0, ACCLO wsr\t%1, ACCLO" - [(set_attr "type" "move,move,move,move,load,store,rsr,wsr") + [(set_attr "type" "move,move,move,move,move,load,store,rsr,wsr") (set_attr "mode" "HI") - (set_attr "length" "2,2,3,3,3,3,3,3")]) + (set_attr "length" "2,2,3,3,3,3,3,3,3")]) ;; 8-bit Integer moves @@ -919,7 +921,7 @@ (match_operand:SF 1 "general_operand" ""))] "" { - if (!TARGET_CONST16 && CONSTANT_P (operands[1])) + if (!TARGET_CONST16 && !TARGET_AUTO_LITPOOLS && CONSTANT_P (operands[1])) operands[1] = force_const_mem (SFmode, operands[1]); if ((!register_operand (operands[0], SFmode) @@ -934,8 +936,8 @@ }) (define_insn "movsf_internal" - [(set (match_operand:SF 0 "nonimmed_operand" "=f,f,U,D,D,R,a,f,a,W,a,a,U") - (match_operand:SF 1 "move_operand" "f,U,f,d,R,d,r,r,f,iF,T,U,r"))] + [(set (match_operand:SF 0 "nonimmed_operand" "=f,f,U,D,D,R,a,f,a,a,W,a,a,U") + (match_operand:SF 1 "move_operand" "f,U,f,d,R,d,r,r,f,Y,iF,T,U,r"))] "((register_operand (operands[0], SFmode) || register_operand (operands[1], SFmode)) && !(FP_REG_P (xt_true_regnum (operands[0])) @@ -950,13 +952,14 @@ mov\t%0, %1 wfr\t%0, %1 rfr\t%0, %1 + movi\t%0, %y1 const16\t%0, %t1\;const16\t%0, %b1 %v1l32r\t%0, %1 %v1l32i\t%0, %1 %v0s32i\t%1, %0" - [(set_attr "type" "farith,fload,fstore,move,load,store,move,farith,farith,move,load,load,store") + [(set_attr "type" "farith,fload,fstore,move,load,store,move,farith,farith,move,move,load,load,store") (set_attr "mode" "SF") - (set_attr "length" "3,3,3,2,2,2,3,3,3,6,3,3,3")]) + (set_attr "length" "3,3,3,2,2,2,3,3,3,3,6,3,3,3")]) (define_insn "*lsiu" [(set (match_operand:SF 0 "register_operand" "=f") @@ -997,7 +1000,7 @@ (match_operand:DF 1 "general_operand" ""))] "" { - if (CONSTANT_P (operands[1]) && !TARGET_CONST16) + if (CONSTANT_P (operands[1]) && !TARGET_CONST16 && !TARGET_AUTO_LITPOOLS) operands[1] = force_const_mem (DFmode, operands[1]); if (!register_operand (operands[0], DFmode) @@ -1008,8 +1011,8 @@ }) (define_insn_and_split "movdf_internal" - [(set (match_operand:DF 0 "nonimmed_operand" "=a,W,a,a,U") - (match_operand:DF 1 "move_operand" "r,iF,T,U,r"))] + [(set (match_operand:DF 0 "nonimmed_operand" "=a,a,W,a,a,U") + (match_operand:DF 1 "move_operand" "r,Y,iF,T,U,r"))] "register_operand (operands[0], DFmode) || register_operand (operands[1], DFmode)" "#" --- a/gcc/config/xtensa/xtensa.opt +++ b/gcc/config/xtensa/xtensa.opt @@ -38,6 +38,10 @@ Target Intersperse literal pools with code in the text section +mauto-litpools +Target Report Mask(AUTO_LITPOOLS) +Relax literals in assembler and place them automatically in the text section + mserialize-volatile Target Report Mask(SERIALIZE_VOLATILE) -mno-serialize-volatile Do not serialize volatile memory references with MEMW instructions