diff -Naur newlib-1.17.0/COPYING.LIBGLOSS newlib-1.17.0-new/COPYING.LIBGLOSS --- newlib-1.17.0/COPYING.LIBGLOSS 2008-12-18 00:16:07.000000000 +0100 +++ newlib-1.17.0-new/COPYING.LIBGLOSS 2009-05-22 09:57:49.000000000 +0200 @@ -228,3 +228,33 @@ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +(13) Atmel Corporation (avr32 targets only) +Copyright (c) 2006, Atmel Corporation All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, +this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation +and/or other materials provided with the distribution. + +3. The name of ATMEL may not be used to endorse or promote products +derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY +DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY +WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. diff -Naur newlib-1.17.0/COPYING.NEWLIB newlib-1.17.0-new/COPYING.NEWLIB --- newlib-1.17.0/COPYING.NEWLIB 2008-12-18 00:16:07.000000000 +0100 +++ newlib-1.17.0-new/COPYING.NEWLIB 2009-05-22 09:57:49.000000000 +0200 @@ -767,3 +767,33 @@ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +(35) Atmel Corporation (avr32 targets only) +Copyright (c) 2006, Atmel Corporation All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, +this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation +and/or other materials provided with the distribution. + +3. The name of ATMEL may not be used to endorse or promote products +derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY +DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY +WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. diff -Naur newlib-1.17.0/newlib/configure.host newlib-1.17.0-new/newlib/configure.host --- newlib-1.17.0/newlib/configure.host 2008-12-18 00:09:09.000000000 +0100 +++ newlib-1.17.0-new/newlib/configure.host 2009-05-22 09:57:49.000000000 +0200 @@ -99,6 +99,10 @@ arm) machine_dir=arm ;; + avr32*) + machine_dir=avr32 + newlib_cflags="${newlib_cflags} -ffunction-sections" + ;; avr*) newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues" ;; @@ -365,6 +369,9 @@ crx*) sys_dir= ;; + avr32-*-*) + sys_dir=avr32 + ;; d10v*) sys_dir=d10v ;; @@ -575,6 +582,10 @@ arc*) newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED" ;; + avr32*) + syscall_dir=syscalls + newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM" + ;; avr*) newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES" ;; diff -Naur newlib-1.17.0/newlib/libc/include/machine/ieeefp.h newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h --- newlib-1.17.0/newlib/libc/include/machine/ieeefp.h 2008-12-11 21:05:38.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h 2009-05-22 09:57:49.000000000 +0200 @@ -275,6 +275,10 @@ #define _DOUBLE_IS_32BITS #endif +#ifdef __AVR32__ +#define __IEEE_BIG_ENDIAN +#endif + #if defined(__or32__) || defined(__or1k__) || defined(__or16__) #define __IEEE_BIG_ENDIAN #endif diff -Naur newlib-1.17.0/newlib/libc/include/machine/setjmp.h newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h --- newlib-1.17.0/newlib/libc/include/machine/setjmp.h 2008-12-11 21:05:38.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h 2009-05-22 09:57:49.000000000 +0200 @@ -13,6 +13,13 @@ #define _JBLEN 24 #endif +#if defined(__AVR32__) +/* + r0-r7, lr, sp + */ +#define _JBLEN 10 +#endif + #ifdef __sparc__ /* * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext). diff -Naur newlib-1.17.0/newlib/libc/include/machine/time.h newlib-1.17.0-new/newlib/libc/include/machine/time.h --- newlib-1.17.0/newlib/libc/include/machine/time.h 2000-12-04 20:06:37.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/include/machine/time.h 2009-05-22 09:57:49.000000000 +0200 @@ -6,6 +6,10 @@ #else /* !__rtems__ */ #if defined(__arm__) || defined(__thumb__) #define _CLOCKS_PER_SEC_ 100 +#else +#if defined(__AVR32__) +#define _CLOCKS_PER_SEC_ 1000000 +#endif #endif #endif /* !__rtems__ */ diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4 --- newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4 2009-05-22 09:57:49.000000000 +0200 @@ -0,0 +1,382 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4-p6 + +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +dnl This provides configure definitions used by all the newlib +dnl configure.in files. + +dnl Basic newlib configury. This calls basic introductory stuff, +dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs +dnl configure.host. The only argument is the relative path to the top +dnl newlib directory. + +AC_DEFUN(NEWLIB_CONFIGURE, +[ +dnl Default to --enable-multilib +AC_ARG_ENABLE(multilib, +[ --enable-multilib build many library versions (default)], +[case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; + esac], [multilib=yes])dnl + +dnl Support --enable-target-optspace +AC_ARG_ENABLE(target-optspace, +[ --enable-target-optspace optimize for space], +[case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; + esac], [target_optspace=])dnl + +dnl Support --enable-malloc-debugging - currently only supported for Cygwin +AC_ARG_ENABLE(malloc-debugging, +[ --enable-malloc-debugging indicate malloc debugging requested], +[case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; + esac], [malloc_debugging=])dnl + +dnl Support --enable-newlib-mb +AC_ARG_ENABLE(newlib-mb, +[ --enable-newlib-mb enable multibyte support], +[case "${enableval}" in + yes) newlib_mb=yes ;; + no) newlib_mb=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;; + esac], [newlib_mb=])dnl + +dnl Support --enable-newlib-iconv +AC_ARG_ENABLE(newlib-iconv, +[ --enable-newlib-iconv enable iconv library support], +[case "${enableval}" in + yes) newlib_iconv=yes ;; + no) newlib_iconv=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; + esac], [newlib_iconv=])dnl + +dnl Support --enable-newlib-builtin-converters +AC_ARG_ENABLE(newlib-builtin-converters, +[ --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in], +[if test x${enableval} = x; then + AC_MSG_ERROR(bad value ${enableval} for newlib-builtin-converters option - use comma-separated list) + fi + builtin_converters=${enableval} + ], [builtin_converters=])dnl + +dnl Support --enable-newlib-multithread +AC_ARG_ENABLE(newlib-multithread, +[ --enable-newlib-multithread enable support for multiple threads], +[case "${enableval}" in + yes) newlib_multithread=yes ;; + no) newlib_multithread=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; + esac], [newlib_multithread=yes])dnl + +dnl Support --enable-newlib-elix-level +AC_ARG_ENABLE(newlib-elix-level, +[ --enable-newlib-elix-level supply desired elix library level (1-4)], +[case "${enableval}" in + 0) newlib_elix_level=0 ;; + 1) newlib_elix_level=1 ;; + 2) newlib_elix_level=2 ;; + 3) newlib_elix_level=3 ;; + 4) newlib_elix_level=4 ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; + esac], [newlib_elix_level=0])dnl + +dnl Support --disable-newlib-io-float +AC_ARG_ENABLE(newlib-io-float, +[ --disable-newlib-io-float disable printf/scanf family float support], +[case "${enableval}" in + yes) newlib_io_float=yes ;; + no) newlib_io_float=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; + esac], [newlib_io_float=yes])dnl + +dnl Support --disable-newlib-supplied-syscalls +AC_ARG_ENABLE(newlib-supplied-syscalls, +[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], +[case "${enableval}" in + yes) newlib_may_supply_syscalls=yes ;; + no) newlib_may_supply_syscalls=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; + esac], [newlib_may_supply_syscalls=yes])dnl + +AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) + +dnl We may get other options which we don't document: +dnl --with-target-subdir, --with-multisrctop, --with-multisubdir + +test -z "[$]{with_target_subdir}" && with_target_subdir=. + +if test "[$]{srcdir}" = "."; then + if test "[$]{with_target_subdir}" != "."; then + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" + else + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" + fi +else + newlib_basedir="[$]{srcdir}/$1" +fi +AC_SUBST(newlib_basedir) + +AC_CANONICAL_SYSTEM + +AM_INIT_AUTOMAKE(newlib, 1.12.0) + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + +AC_DEFUN(LIB_AC_PROG_CC, +[AC_BEFORE([$0], [AC_PROG_CPP])dnl +AC_CHECK_PROG(CC, gcc, gcc) +if test -z "$CC"; then + AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) + test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) +fi + +AC_PROG_CC_GNU + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +dnl Check whether -g works, even if CFLAGS is set, in case the package +dnl plays around with CFLAGS (such as to build both debugging and +dnl normal versions of a library), tasteless as that idea is. + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + AC_PROG_CC_G + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi +]) + +LIB_AC_PROG_CC + +AC_CHECK_TOOL(AS, as) +AC_CHECK_TOOL(AR, ar) +AC_CHECK_TOOL(RANLIB, ranlib, :) + +AC_PROG_INSTALL + +AM_MAINTAINER_MODE + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +if false; then + AC_EXEEXT +fi + +. [$]{newlib_basedir}/configure.host + +newlib_cflags="[$]{newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} +AC_SUBST(NEWLIB_CFLAGS) + +LDFLAGS=${ldflags} +AC_SUBST(LDFLAGS) + +AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) +AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) +AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) +AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) +AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) + +AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) + +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we +# use oext, which is set in configure.host based on the target platform. +OBJEXT=${oext} + +AC_SUBST(OBJEXT) +AC_SUBST(oext) +AC_SUBST(aext) + +AC_SUBST(libm_machine_dir) +AC_SUBST(machine_dir) +AC_SUBST(sys_dir) +]) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) + +# Copyright 2002 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.4-p6])]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN([AM_MISSING_PROG], +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Define a conditional. + +AC_DEFUN([AM_CONDITIONAL], +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure newlib-1.17.0-new/newlib/libc/machine/avr32/configure --- newlib-1.17.0/newlib/libc/machine/avr32/configure 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure 2009-05-22 09:57:49.000000000 +0200 @@ -0,0 +1,3950 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION. +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='newlib' +PACKAGE_TARNAME='newlib' +PACKAGE_VERSION='NEWLIB_VERSION' +PACKAGE_STRING='newlib NEWLIB_VERSION' +PACKAGE_BUGREPORT='' + +ac_unique_file="Makefile.am" +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +MAY_SUPPLY_SYSCALLS_TRUE +MAY_SUPPLY_SYSCALLS_FALSE +newlib_basedir +build +build_cpu +build_vendor +build_os +host +host_cpu +host_vendor +host_os +target +target_cpu +target_vendor +target_os +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +SET_MAKE +CC +AS +AR +RANLIB +MAINTAINER_MODE_TRUE +MAINTAINER_MODE_FALSE +MAINT +NEWLIB_CFLAGS +LDFLAGS +ELIX_LEVEL_0_TRUE +ELIX_LEVEL_0_FALSE +ELIX_LEVEL_1_TRUE +ELIX_LEVEL_1_FALSE +ELIX_LEVEL_2_TRUE +ELIX_LEVEL_2_FALSE +ELIX_LEVEL_3_TRUE +ELIX_LEVEL_3_FALSE +ELIX_LEVEL_4_TRUE +ELIX_LEVEL_4_FALSE +USE_LIBTOOL_TRUE +USE_LIBTOOL_FALSE +OBJEXT +oext +aext +libm_machine_dir +machine_dir +sys_dir +LIBOBJS +LTLIBOBJS' +ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-multilib build many library versions (default) + --enable-target-optspace optimize for space + --enable-malloc-debugging indicate malloc debugging requested + --enable-newlib-mb enable multibyte support + --enable-newlib-iconv enable iconv library support + --enable-newlib-builtin-converters enable specific comma-separated list of iconv converters to be built-in + --enable-newlib-multithread enable support for multiple threads + --enable-newlib-elix-level supply desired elix library level (1-4) + --disable-newlib-io-float disable printf/scanf family float support + --disable-newlib-supplied-syscalls disable newlib from supplying syscalls + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer + +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +newlib configure NEWLIB_VERSION +generated by GNU Autoconf 2.61 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by newlib $as_me NEWLIB_VERSION, which was +generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" +else + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" +fi +shift +for ac_site_file +do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +ac_aux_dir= +for ac_dir in ../../../.. "$srcdir"/../../../..; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +{ echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +am__api_version="1.4" +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done +IFS=$as_save_IFS + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +rm -f conftest* +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm -f conftest.sed + +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } + SET_MAKE= +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + +# Check whether --enable-multilib was given. +if test "${enable_multilib+set}" = set; then + enableval=$enable_multilib; case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 +echo "$as_me: error: bad value ${enableval} for multilib option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + multilib=yes +fi + +# Check whether --enable-target-optspace was given. +if test "${enable_target_optspace+set}" = set; then + enableval=$enable_target_optspace; case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 +echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + target_optspace= +fi + +# Check whether --enable-malloc-debugging was given. +if test "${enable_malloc_debugging+set}" = set; then + enableval=$enable_malloc_debugging; case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 +echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + malloc_debugging= +fi + +# Check whether --enable-newlib-mb was given. +if test "${enable_newlib_mb+set}" = set; then + enableval=$enable_newlib_mb; case "${enableval}" in + yes) newlib_mb=yes ;; + no) newlib_mb=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-mb option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-mb option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_mb= +fi + +# Check whether --enable-newlib-iconv was given. +if test "${enable_newlib_iconv+set}" = set; then + enableval=$enable_newlib_iconv; case "${enableval}" in + yes) newlib_iconv=yes ;; + no) newlib_iconv=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_iconv= +fi + +# Check whether --enable-newlib-builtin-converters was given. +if test "${enable_newlib_builtin_converters+set}" = set; then + enableval=$enable_newlib_builtin_converters; if test x${enableval} = x; then + { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&2;} + { (exit 1); exit 1; }; } + fi + builtin_converters=${enableval} + +else + builtin_converters= +fi + +# Check whether --enable-newlib-multithread was given. +if test "${enable_newlib_multithread+set}" = set; then + enableval=$enable_newlib_multithread; case "${enableval}" in + yes) newlib_multithread=yes ;; + no) newlib_multithread=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_multithread=yes +fi + +# Check whether --enable-newlib-elix-level was given. +if test "${enable_newlib_elix_level+set}" = set; then + enableval=$enable_newlib_elix_level; case "${enableval}" in + 0) newlib_elix_level=0 ;; + 1) newlib_elix_level=1 ;; + 2) newlib_elix_level=2 ;; + 3) newlib_elix_level=3 ;; + 4) newlib_elix_level=4 ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_elix_level=0 +fi + +# Check whether --enable-newlib-io-float was given. +if test "${enable_newlib_io_float+set}" = set; then + enableval=$enable_newlib_io_float; case "${enableval}" in + yes) newlib_io_float=yes ;; + no) newlib_io_float=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_io_float=yes +fi + +# Check whether --enable-newlib-supplied-syscalls was given. +if test "${enable_newlib_supplied_syscalls+set}" = set; then + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in + yes) newlib_may_supply_syscalls=yes ;; + no) newlib_may_supply_syscalls=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_may_supply_syscalls=yes +fi + + + +if test x${newlib_may_supply_syscalls} = xyes; then + MAY_SUPPLY_SYSCALLS_TRUE= + MAY_SUPPLY_SYSCALLS_FALSE='#' +else + MAY_SUPPLY_SYSCALLS_TRUE='#' + MAY_SUPPLY_SYSCALLS_FALSE= +fi + + +test -z "${with_target_subdir}" && with_target_subdir=. + +if test "${srcdir}" = "."; then + if test "${with_target_subdir}" != "."; then + newlib_basedir="${srcdir}/${with_multisrctop}../../../.." + else + newlib_basedir="${srcdir}/${with_multisrctop}../../.." + fi +else + newlib_basedir="${srcdir}/../../.." +fi + + +{ echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6; } +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 +echo "$as_me: error: invalid value of canonical target" >&2;} + { (exit 1); exit 1; }; };; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + + +PACKAGE=newlib + +VERSION=1.12.0 + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } +fi + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + + + +missing_dir=`cd $ac_aux_dir && pwd` +{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 +echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal-${am__api_version} + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working autoconf" >&5 +echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + AUTOCONF="$missing_dir/missing autoconf" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 +echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake-${am__api_version} + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + AUTOMAKE="$missing_dir/missing automake-${am__api_version}" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working autoheader" >&5 +echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + AUTOHEADER="$missing_dir/missing autoheader" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working makeinfo" >&5 +echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + MAKEINFO="$missing_dir/missing makeinfo" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + + + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 +echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +fi + +#AC_PROG_CC_GNU + +if test $ac_cv_c_compiler_gnu = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= +# AC_PROG_CC_G + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AS="${ac_tool_prefix}as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { echo "$as_me:$LINENO: result: $AS" >&5 +echo "${ECHO_T}$AS" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AS="as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +echo "${ECHO_T}$ac_ct_AS" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done +IFS=$as_save_IFS + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +#if false; then +# +#fi + +. ${newlib_basedir}/configure.host + +newlib_cflags="${newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} + + +LDFLAGS=${ldflags} + + + + +if test x${newlib_elix_level} = x0; then + ELIX_LEVEL_0_TRUE= + ELIX_LEVEL_0_FALSE='#' +else + ELIX_LEVEL_0_TRUE='#' + ELIX_LEVEL_0_FALSE= +fi + + +if test x${newlib_elix_level} = x1; then + ELIX_LEVEL_1_TRUE= + ELIX_LEVEL_1_FALSE='#' +else + ELIX_LEVEL_1_TRUE='#' + ELIX_LEVEL_1_FALSE= +fi + + +if test x${newlib_elix_level} = x2; then + ELIX_LEVEL_2_TRUE= + ELIX_LEVEL_2_FALSE='#' +else + ELIX_LEVEL_2_TRUE='#' + ELIX_LEVEL_2_FALSE= +fi + + +if test x${newlib_elix_level} = x3; then + ELIX_LEVEL_3_TRUE= + ELIX_LEVEL_3_FALSE='#' +else + ELIX_LEVEL_3_TRUE='#' + ELIX_LEVEL_3_FALSE= +fi + + +if test x${newlib_elix_level} = x4; then + ELIX_LEVEL_4_TRUE= + ELIX_LEVEL_4_FALSE='#' +else + ELIX_LEVEL_4_TRUE='#' + ELIX_LEVEL_4_FALSE= +fi + + + +if test x${use_libtool} = xyes; then + USE_LIBTOOL_TRUE= + USE_LIBTOOL_FALSE='#' +else + USE_LIBTOOL_TRUE='#' + USE_LIBTOOL_FALSE= +fi + +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we +# use oext, which is set in configure.host based on the target platform. +OBJEXT=${oext} + + + + + + + + + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by newlib $as_me NEWLIB_VERSION, which was +generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# Files that config.status was made for. +config_files="$ac_config_files" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +newlib config.status NEWLIB_VERSION +configured by $0, generated by GNU Autoconf 2.61, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2006 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL + export CONFIG_SHELL + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# +# Set up the sed scripts for CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "$CONFIG_FILES"; then + +_ACEOF + + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim +newlib_basedir!$newlib_basedir$ac_delim +build!$build$ac_delim +build_cpu!$build_cpu$ac_delim +build_vendor!$build_vendor$ac_delim +build_os!$build_os$ac_delim +host!$host$ac_delim +host_cpu!$host_cpu$ac_delim +host_vendor!$host_vendor$ac_delim +host_os!$host_os$ac_delim +target!$target$ac_delim +target_cpu!$target_cpu$ac_delim +target_vendor!$target_vendor$ac_delim +target_os!$target_os$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +CC!$CC$ac_delim +AS!$AS$ac_delim +AR!$AR$ac_delim +RANLIB!$RANLIB$ac_delim +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim +MAINT!$MAINT$ac_delim +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim +LDFLAGS!$LDFLAGS$ac_delim +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim +OBJEXT!$OBJEXT$ac_delim +oext!$oext$ac_delim +aext!$aext$ac_delim +libm_machine_dir!$libm_machine_dir$ac_delim +machine_dir!$machine_dir$ac_delim +sys_dir!$sys_dir$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi + +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof +_ACEOF + + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF +fi # test -n "$CONFIG_FILES" + + +for ac_tag in :F $CONFIG_FILES +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + fi + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +case `sed -n '/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' $ac_file_inputs` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s&@configure_input@&$configure_input&;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac + ;; + + + + esac + +done # for ac_tag + + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure.in newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in --- newlib-1.17.0/newlib/libc/machine/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,14 @@ +dnl This is the newlib/libc/machine/arm configure.in file. +dnl Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.59) +AC_INIT([newlib],[NEWLIB_VERSION]) +AC_CONFIG_SRCDIR([Makefile.am]) + +dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. +AC_CONFIG_AUX_DIR(../../../..) + +NEWLIB_CONFIGURE(../../..) + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am --- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,16 @@ +## Process this file with automake to generate Makefile.in + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +AM_CCASFLAGS = $(INCLUDES) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = strcmp.S strncpy.S memcpy.S +lib_a_CCASFLAGS=$(AM_CCASFLAGS) +lib_a_CFLAGS = $(AM_CFLAGS) + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in --- newlib-1.17.0/newlib/libc/machine/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,327 @@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +AR = @AR@ +AS = @AS@ +CC = @CC@ +CPP = @CPP@ +EXEEXT = @EXEEXT@ +LDFLAGS = @LDFLAGS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +VERSION = @VERSION@ +aext = @aext@ +libm_machine_dir = @libm_machine_dir@ +machine_dir = @machine_dir@ +newlib_basedir = @newlib_basedir@ +oext = @oext@ +sys_dir = @sys_dir@ + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = strcmp.S strncpy.S memcpy.S + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +LIBRARIES = $(noinst_LIBRARIES) + + +DEFS = @DEFS@ -I. -I$(srcdir) +CPPFLAGS = +LIBS = @LIBS@ +lib_a_LIBADD = +lib_a_OBJECTS = strcmp.o strncpy.o memcpy.o +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +SOURCES = $(lib_a_SOURCES) +OBJECTS = $(lib_a_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .o .s +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ + ../../../acinclude.m4 ../../../aclocal.m4 \ + ../../../libtool.m4 + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +mostlyclean-noinstLIBRARIES: + +clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) + +distclean-noinstLIBRARIES: + +maintainer-clean-noinstLIBRARIES: + +.c.o: + $(COMPILE) -c $< + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) + -rm -f lib.a + $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) + $(RANLIB) lib.a + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + @for file in $(DISTFILES); do \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: +check: check-am +installcheck-am: +installcheck: installcheck-am +install-info-am: +install-info: install-info-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(LIBRARIES) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ + mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ + mostlyclean-am + +clean: clean-am + +distclean-am: distclean-noinstLIBRARIES distclean-compile \ + distclean-tags distclean-generic clean-am + +distclean: distclean-am + -rm -f config.status + +maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ + maintainer-clean-compile maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + -rm -f config.status + +.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ +clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-info-am install-info \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S --- newlib-1.17.0/newlib/libc/machine/avr32/memcpy.S 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/memcpy.S 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2004 Atmel Norway + */ + +/* Don't use r12 as dst since we must return it unmodified */ + + .text + .global memcpy + .type memcpy, @function +#if defined(__AVR32_HAS_UNALIGNED_WORD__) +memcpy: + /* Check if src and dst are aligned + if not do a word based copying. */ + or r9, r12, r11 + andl r9, 3, COH + brne .Lunaligned_copy + + pushm r12, lr + sub r10, 8 + brmi .Lword_copy + +0: + ld.d r8, r11++ + sub r10, 8 + st.d r12++, r8 + brpl 0b + +.Lword_copy: + sub r10, -4 + brmi .Lbyte_copy + +0: + ld.w r8, r11++ + sub r10, 4 + st.w r12++, r8 + brpl 0b + +.Lbyte_copy: + sub r10, -4 + breq 2f +1: + ld.ub r8, r11++ + sub r10, 1 + st.b r12++, r8 + brne 1b +2: + popm r12, pc + +.Lunaligned_copy: + mov r9, r12 + sub r10, 4 + + brmi .Lbyte_copy2 + +0: + ld.w r8, r11++ + sub r10, 4 + st.w r12++, r8 + brpl 0b + +.Lbyte_copy2: + sub r10, -4 + reteq r9 +1: + ld.ub r8, r11++ + sub r10, 1 + st.b r12++, r8 + brne 1b + + ret r9 + + +#else + +#define dst r9 +#define src r11 +#define len r10 + +#if defined(__AVR32_UC__) +memcpy: + /* If we have less than 8 bytes, don't do anything fancy + just an unrolled byte copy */ + cp.w r10, 8 + brlt .Lless_than_8 + /* Check if src and dst are aligned. */ + or r9, r12, r11 + andl r9, 3, COH + brne .Lunaligned_copy + + /* Check if larger than 31 */ + cp.w r10, 32 + brge .Lmore_than_31: + + /* Less than 32. */ + asr r8, r10, 2 + rsub r9, r8, 8 + add pc, pc, r9 << 2 + .irp offset,0,1,2,3,4,5,6 + ld.w r9, r11[(6-\offset)*4] + st.w r12[(6-\offset)*4], r9 + .endr + + add r11, r11, r8 << 2 + add r8, r12, r8 << 2 + andl r10, 0x3 + rsub r10, r10, 4 + add pc, pc, r10 << 2 + .irp offset,0,1,2 + ld.ub r9, r11[2-\offset] + st.b r8[2-\offset], r9 + .endr + + retal r12 + +.Lless_than_8: + rsub r10, r10, 9 + add pc, pc, r10 << 2 + .irp offset,0,1,2,3,4,5,6,7 + ld.ub r9, r11[7-\offset] + st.b r12[7-\offset], r9 + .endr + + retal r12 + +.Lmore_than_31: + stm --sp, r6-r7, lr + mov r9, r12 + +.Laligned_copy: + sub r10, 32 + +1: /* Copy 32 bytes at a time */ + ld.d r6, r11++ + st.d r9++, r6 + ld.d r6, r11++ + st.d r9++, r6 + ld.d r6, r11++ + st.d r9++, r6 + ld.d r6, r11++ + st.d r9++, r6 + sub r10, 32 + brge 1b + +.Lless_than_32: + /* Copy 16 more bytes if possible */ + sub r10, -16 + brlt .Lless_than_16 + ld.d r6, r11++ + st.d r9++, r6 + ld.d r6, r11++ + st.d r9++, r6 + sub r10, 16 + +.Lless_than_16: + + /* Do the remaining as byte copies */ + neg r10 + add pc, pc, r10 << 3 + nop + nop + .irp offset,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14 + ld.ub r6, r11[14-\offset],e + st.b r9[14-\offset], r6,e + .endr + + ldm sp++, r6-r7, pc + +.Lunaligned_copy: + /* src and dst are unaligned. */ +0: + sub r10, 1 + ld.ub r9, r11[r10] + st.b r12[r10], r9 + brne 0b + + retal r12 + .size memcpy, . - memcpy + +#else +memcpy: + pref src[0] + mov dst, r12 + + /* If we have less than 32 bytes, don't do anything fancy */ + cp.w len, 32 + brge .Lmore_than_31 + + sub len, 1 + retlt r12 +1: ld.ub r8, src++ + st.b r12, r8 + sub len, 1 + brge 1b + retal r12 + +.Lmore_than_31: + pushm r0-r7, lr + + /* Check alignment */ + mov r8, src + andl r8, 31, COH + brne .Lunaligned_src + mov r8, dst + andl r8, 3, COH + brne .Lunaligned_dst + +.Laligned_copy: + sub len, 32 + brlt .Lless_than_32 + +1: /* Copy 32 bytes at a time */ + pref src[32] + ldm src, r0-r7 + sub src, -32 + stm dst, r0-r7 + sub dst, -32 + sub len, 32 + brge 1b + +.Lless_than_32: + /* Copy 16 more bytes if possible */ + sub len, -16 + brlt .Lless_than_16 + ldm src, r0-r3 + sub src, -16 + sub len, 16 + stm dst, r0-r3 + sub dst, -16 + +.Lless_than_16: + /* Do the remaining as byte copies */ + neg len + add pc, pc, len << 2 + .rept 15 + ld.ub r0, src++ + st.b dst++, r0 + .endr + + popm r0-r7, pc + +.Lunaligned_src: + /* Make src cacheline-aligned. r8 = (src & 31) */ + rsub r8, r8, 32 + sub len, r8 +1: ld.ub r0, src++ + st.b dst++, r0 + sub r8, 1 + brne 1b + + /* If dst is word-aligned, we're ready to go */ + pref src[0] + mov r8, 3 + tst dst, r8 + breq .Laligned_copy + +.Lunaligned_dst: + /* src is aligned, but dst is not. Expect bad performance */ +0: + ld.ub r0, src++ + st.b dst++, r0 + sub len, 1 + brne 0b + + popm r0-r7, pc + .size memcpy, . - memcpy + + +#endif +#endif diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S --- newlib-1.17.0/newlib/libc/machine/avr32/strcmp.S 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/strcmp.S 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,133 @@ + .align 2 + .global strcmp + +strcmp: +#if !defined(__AVR32_HAS_UNALIGNED_WORD__) +#ifdef __AVR32_UC__ + /* Check if both strings are aligned. */ + or r10, r12, r11 + andl r10, 3, COH + brne .Lbyte_strcmp +0: + ld.w r10, r12[0] + ld.w r9, r11[0] + tnbz r10 + breq 1f + cp.w r10, r9 + brne 1f + ld.w r10, r12[4] + ld.w r9, r11[4] + tnbz r10 + breq 1f + cp.w r10, r9 + brne 1f + ld.w r10, r12[8] + ld.w r9, r11[8] + tnbz r10 + breq 1f + cp.w r10, r9 + brne 1f + ld.w r10, r12[12] + ld.w r9, r11[12] + tnbz r10 + breq 1f + sub r12, -16 + sub r11, -16 + cp.w r10, r9 + breq 0b +1: + bfextu r12, r10, 24, 8 + bfextu r11, r9, 24, 8 + reteq r12 + sub r12, r11 + retne r12 + + bfextu r12, r10, 16, 8 + bfextu r11, r9, 16, 8 + reteq r12 + sub r12, r11 + retne r12 + + bfextu r12, r10, 8, 8 + bfextu r11, r9, 8, 8 + reteq r12 + sub r12, r11 + retne r12 + + castu.b r10 + castu.b r9 + sub r10, r9 + ret r10 + +.Lbyte_strcmp: +0: + ld.ub r10, r11[0] + ld.ub r9, r12[0] + cp.w r10, 0 + reteq r9 + sub r9, r10 + retne r9 + ld.ub r10, r11[1] + ld.ub r9, r12[1] + cp.w r10, 0 + reteq r9 + sub r9, r10 + retne r9 + ld.ub r10, r11[2] + ld.ub r9, r12[2] + cp.w r10, 0 + reteq r9 + sub r9, r10 + retne r9 + ld.ub r10, r11[3] + ld.ub r9, r12[3] + cp.w r10, 0 + reteq r9 + sub r9, r10 + retne r9 + sub r11, -4 + sub r12, -4 + rjmp 0b +#else +0: + ld.ub r10, r11++ + ld.ub r9, r12++ + cp.w r10, 0 + reteq r9 + sub r9, r10 + breq 0b + ret r9 +#endif +#else +0: + ld.w r10, r12++ + ld.w r9, r11++ + tnbz r10 + breq 1f + cp.w r10, r9 + breq 0b + +1: + bfextu r12, r10, 24, 8 + bfextu r11, r9, 24, 8 + reteq r12 + sub r12, r11 + retne r12 + + bfextu r12, r10, 16, 8 + bfextu r11, r9, 16, 8 + reteq r12 + sub r12, r11 + retne r12 + + bfextu r12, r10, 8, 8 + bfextu r11, r9, 8, 8 + reteq r12 + sub r12, r11 + retne r12 + + castu.b r10 + castu.b r9 + sub r10, r9 + ret r10 +#endif diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S --- newlib-1.17.0/newlib/libc/machine/avr32/strncpy.S 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/strncpy.S 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,39 @@ + .align 2 + .global strncpy + +strncpy : +#ifdef __AVR32_UC__ + mov r8, 0 +0: + cp.w r10, r8 + reteq r12 + ld.ub r9, r11[r8] + st.b r12[r8], r9 + sub r8, -1 + cp.w r9, 0 + brne 0b + +1: + cp.w r10, r8 + reteq r12 + st.b r12[r8], r9 + sub r8, -1 + rjmp 1b +#else + mov r8, r12 +0: + sub r10, 1 + ld.ub r9, r11++ + retmi r12 + st.b r8++, r9 + cp.w r9, 0 + brne 0b + +1: + sub r10, 1 + retmi r12 + st.b r8++, r9 + rjmp 1b + + +#endif diff -Naur newlib-1.17.0/newlib/libc/machine/configure newlib-1.17.0-new/newlib/libc/machine/configure --- newlib-1.17.0/newlib/libc/machine/configure 2008-12-22 20:45:41.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/configure 2009-05-22 09:57:50.000000000 +0200 @@ -1,25 +1,54 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for newlib 1.17.0. +# Generated by GNU Autoconf 2.61 for newlib 1.17.0. # -# Copyright (C) 2003 Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## -# Be Bourne compatible +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh fi -DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then @@ -29,8 +58,43 @@ fi +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + # Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done PS1='$ ' PS2='> ' PS4='+ ' @@ -44,18 +108,19 @@ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else - $as_unset $as_var + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false @@ -63,157 +128,388 @@ # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# CDPATH. +$as_unset CDPATH -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no fi + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in + case $as_dir in /*) - if ("$as_dir/$as_base" -c ' + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( as_lineno_1=$LINENO as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || + chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: @@ -222,7 +518,28 @@ as_mkdir_p=false fi -as_executable_p="test -f" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -231,15 +548,6 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - # Check that we are running under the correct shell. @@ -390,29 +698,26 @@ +exec 7<&0 &1 + # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -exec 6>&1 - # # Initializations. # ac_default_prefix=/usr/local +ac_clean_files= ac_config_libobj_dir=. +LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - # Identity of this package. PACKAGE_NAME='newlib' PACKAGE_TARNAME='newlib' @@ -424,81 +729,228 @@ # Factoring default headers for most tests. ac_includes_default="\ #include -#if HAVE_SYS_TYPES_H +#ifdef HAVE_SYS_TYPES_H # include #endif -#if HAVE_SYS_STAT_H +#ifdef HAVE_SYS_STAT_H # include #endif -#if STDC_HEADERS +#ifdef STDC_HEADERS # include # include #else -# if HAVE_STDLIB_H +# ifdef HAVE_STDLIB_H # include # endif #endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif -#if HAVE_STRINGS_H +#ifdef HAVE_STRINGS_H # include #endif -#if HAVE_INTTYPES_H +#ifdef HAVE_INTTYPES_H # include -#else -# if HAVE_STDINT_H -# include -# endif #endif -#if HAVE_UNISTD_H +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H # include #endif" -ac_subdirs_all="$ac_subdirs_all a29k" -ac_subdirs_all="$ac_subdirs_all arm" -ac_subdirs_all="$ac_subdirs_all bfin" -ac_subdirs_all="$ac_subdirs_all cris" -ac_subdirs_all="$ac_subdirs_all crx" -ac_subdirs_all="$ac_subdirs_all d10v" -ac_subdirs_all="$ac_subdirs_all d30v" -ac_subdirs_all="$ac_subdirs_all fr30" -ac_subdirs_all="$ac_subdirs_all frv" -ac_subdirs_all="$ac_subdirs_all h8300" -ac_subdirs_all="$ac_subdirs_all h8500" -ac_subdirs_all="$ac_subdirs_all hppa" -ac_subdirs_all="$ac_subdirs_all i386" -ac_subdirs_all="$ac_subdirs_all i960" -ac_subdirs_all="$ac_subdirs_all iq2000" -ac_subdirs_all="$ac_subdirs_all lm32" -ac_subdirs_all="$ac_subdirs_all m32c" -ac_subdirs_all="$ac_subdirs_all m32r" -ac_subdirs_all="$ac_subdirs_all m68hc11" -ac_subdirs_all="$ac_subdirs_all m68k" -ac_subdirs_all="$ac_subdirs_all m88k" -ac_subdirs_all="$ac_subdirs_all mep" -ac_subdirs_all="$ac_subdirs_all mips" -ac_subdirs_all="$ac_subdirs_all mn10200" -ac_subdirs_all="$ac_subdirs_all mn10300" -ac_subdirs_all="$ac_subdirs_all mt" -ac_subdirs_all="$ac_subdirs_all necv70" -ac_subdirs_all="$ac_subdirs_all powerpc" -ac_subdirs_all="$ac_subdirs_all sh" -ac_subdirs_all="$ac_subdirs_all sparc" -ac_subdirs_all="$ac_subdirs_all spu" -ac_subdirs_all="$ac_subdirs_all tic4x" -ac_subdirs_all="$ac_subdirs_all tic80" -ac_subdirs_all="$ac_subdirs_all v850" -ac_subdirs_all="$ac_subdirs_all w65" -ac_subdirs_all="$ac_subdirs_all x86_64" -ac_subdirs_all="$ac_subdirs_all xscale" -ac_subdirs_all="$ac_subdirs_all xstormy16" -ac_subdirs_all="$ac_subdirs_all z8k" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs HAVE_MACHINE_DIR_TRUE HAVE_MACHINE_DIR_FALSE LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +MAY_SUPPLY_SYSCALLS_TRUE +MAY_SUPPLY_SYSCALLS_FALSE +newlib_basedir +build +build_cpu +build_vendor +build_os +host +host_cpu +host_vendor +host_os +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +CYGPATH_W +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +install_sh +STRIP +INSTALL_STRIP_PROGRAM +mkdir_p +AWK +SET_MAKE +am__leading_dot +AMTAR +am__tar +am__untar +CC +DEPDIR +am__include +am__quote +AMDEP_TRUE +AMDEP_FALSE +AMDEPBACKSLASH +CCDEPMODE +am__fastdepCC_TRUE +am__fastdepCC_FALSE +AS +AR +RANLIB +READELF +MAINTAINER_MODE_TRUE +MAINTAINER_MODE_FALSE +MAINT +CCAS +CCASFLAGS +NEWLIB_CFLAGS +LDFLAGS +ELIX_LEVEL_0_TRUE +ELIX_LEVEL_0_FALSE +ELIX_LEVEL_1_TRUE +ELIX_LEVEL_1_FALSE +ELIX_LEVEL_2_TRUE +ELIX_LEVEL_2_FALSE +ELIX_LEVEL_3_TRUE +ELIX_LEVEL_3_FALSE +ELIX_LEVEL_4_TRUE +ELIX_LEVEL_4_FALSE +USE_LIBTOOL_TRUE +USE_LIBTOOL_FALSE +OBJEXT +oext +aext +lpfx +libm_machine_dir +machine_dir +sys_dir +SED +DLLTOOL +OBJDUMP +LIBTOOL +CFLAGS +CPPFLAGS +ac_ct_CC +EXEEXT +GREP +EGREP +FGREP +LD +DUMPBIN +ac_ct_DUMPBIN +NM +LN_S +lt_ECHO +DSYMUTIL +NMEDIT +LIPO +OTOOL +OTOOL64 +CPP +subdirs +HAVE_MACHINE_DIR_TRUE +HAVE_MACHINE_DIR_FALSE +LIBOBJS +LTLIBOBJS' ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias +CCAS +CCASFLAGS +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' +ac_subdirs_all='a29k +arm +avr32 +bfin +cris +crx +d10v +d30v +fr30 +frv +h8300 +h8500 +hppa +i386 +i960 +iq2000 +lm32 +m32c +m32r +m68hc11 +m68k +m88k +mep +mips +mn10200 +mn10300 +mt +necv70 +powerpc +sh +sparc +spu +tic4x +tic80 +v850 +w65 +x86_64 +xscale +xstormy16 +z8k' # Initialize some variables set by options. ac_init_help= @@ -525,34 +977,48 @@ # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' +datarootdir='${prefix}/share' +datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' ac_prev= +ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" + eval $ac_prev=\$ac_option ac_prev= continue fi - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac # Accept the important Cygnus configure options, so we can diagnose typos. - case $ac_option in + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; @@ -574,33 +1040,45 @@ --config-cache | -C) cache_file=config.cache ;; - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) + -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -627,6 +1105,12 @@ -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; @@ -651,13 +1135,16 @@ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) + | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) @@ -722,6 +1209,16 @@ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; @@ -774,24 +1271,20 @@ -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=\$ac_optarg ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=no ;; --x) # Obsolete; use --with-x. @@ -822,8 +1315,7 @@ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" + eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) @@ -843,27 +1335,19 @@ { (exit 1); exit 1; }; } fi -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir do - eval ac_val=$`echo $ac_var` + eval ac_val=\$$ac_var case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' @@ -890,82 +1374,76 @@ test "$silent" = yes && exec 6>/dev/null +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then + if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CCAS_set=${CCAS+set} -ac_env_CCAS_value=$CCAS -ac_cv_env_CCAS_set=${CCAS+set} -ac_cv_env_CCAS_value=$CCAS -ac_env_CCASFLAGS_set=${CCASFLAGS+set} -ac_env_CCASFLAGS_value=$CCASFLAGS -ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set} -ac_cv_env_CCASFLAGS_value=$CCASFLAGS -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done # # Report the --help message. @@ -994,9 +1472,6 @@ -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] -_ACEOF - - cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] @@ -1014,15 +1489,22 @@ --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -1059,10 +1541,8 @@ --enable-dependency-tracking do not reject slow dependency extractors --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-shared[=PKGS] - build shared libraries [default=yes] - --enable-static[=PKGS] - build static libraries [default=yes] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) @@ -1081,128 +1561,95 @@ CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF +ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. - ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue + test -d "$ac_dir" || continue ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done fi -test -n "$ac_init_help" && exit 0 +test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF newlib configure 1.17.0 -generated by GNU Autoconf 2.59 +generated by GNU Autoconf 2.61 -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF - exit 0 + exit fi -exec 5>config.log -cat >&5 <<_ACEOF +cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by newlib $as_me 1.17.0, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.61. Invocation command line was $ $0 $@ _ACEOF +exec 5>>config.log { cat <<_ASUNAME ## --------- ## @@ -1221,7 +1668,7 @@ /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` @@ -1235,6 +1682,7 @@ test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done +IFS=$as_save_IFS } >&5 @@ -1256,7 +1704,6 @@ ac_configure_args= ac_configure_args0= ac_configure_args1= -ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do @@ -1267,7 +1714,7 @@ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in @@ -1289,9 +1736,7 @@ -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " + ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done @@ -1302,8 +1747,8 @@ # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { @@ -1316,20 +1761,34 @@ _ASBOX echo # The following way of writing the cache mishandles newlines in values, -{ +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} + esac | + sort +) echo cat <<\_ASBOX @@ -1340,22 +1799,28 @@ echo for ac_var in $ac_subst_vars do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## +## ------------------- ## +## File substitutions. ## +## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" done | sort echo fi @@ -1367,26 +1832,24 @@ ## ----------- ## _ASBOX echo - sed "/^$/d" confdefs.h | sort + cat confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status - ' 0 +' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h +rm -f -r conftest* confdefs.h # Predefined preprocessor variables. @@ -1417,14 +1880,17 @@ # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" +else + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" fi -for ac_site_file in $CONFIG_SITE; do +shift +for ac_site_file +do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} @@ -1440,8 +1906,8 @@ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; esac fi else @@ -1453,12 +1919,11 @@ # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do +for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 @@ -1483,8 +1948,7 @@ # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in @@ -1501,12 +1965,6 @@ { (exit 1); exit 1; }; } fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - @@ -1531,67 +1989,92 @@ +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= -for ac_dir in ../../.. $srcdir/../../..; do - if test -f $ac_dir/install-sh; then +for ac_dir in ../../.. "$srcdir"/../../..; do + if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break - elif test -f $ac_dir/install.sh; then + elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break - elif test -f $ac_dir/shtool; then + elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;} + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;} { (exit 1); exit 1; }; } fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + # Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac am__api_version="1.9" @@ -1608,8 +2091,8 @@ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1631,7 +2114,7 @@ # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -1650,21 +2133,22 @@ ;; esac done +IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -1674,8 +2158,8 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file @@ -1717,20 +2201,20 @@ Check your system clock" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } test "$program_prefix" != NONE && - program_transform_name="s,^,$program_prefix,;$program_transform_name" + program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$,$program_suffix,;$program_transform_name" + program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm conftest.sed +rm -f conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` @@ -1782,8 +2266,8 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1796,54 +2280,57 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 + { echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$AWK" && break done -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF +SHELL = /bin/sh all: - @echo 'ac_maketemp="$(MAKE)"' + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac rm -f conftest.make fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } SET_MAKE= else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -1858,7 +2345,7 @@ DEPDIR="${am__leading_dot}deps" - ac_config_commands="$ac_config_commands depfiles" +ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} @@ -1868,8 +2355,8 @@ .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } am__include="#" am__quote= _am_result=none @@ -1896,15 +2383,15 @@ fi -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 +{ echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6; } rm -f confinc confmf -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +# Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" + enableval=$enable_dependency_tracking; +fi -fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' @@ -1922,10 +2409,9 @@ -# Check whether --enable-multilib or --disable-multilib was given. +# Check whether --enable-multilib was given. if test "${enable_multilib+set}" = set; then - enableval="$enable_multilib" - case "${enableval}" in + enableval=$enable_multilib; case "${enableval}" in yes) multilib=yes ;; no) multilib=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 @@ -1934,11 +2420,11 @@ esac else multilib=yes -fi; -# Check whether --enable-target-optspace or --disable-target-optspace was given. +fi + +# Check whether --enable-target-optspace was given. if test "${enable_target_optspace+set}" = set; then - enableval="$enable_target_optspace" - case "${enableval}" in + enableval=$enable_target_optspace; case "${enableval}" in yes) target_optspace=yes ;; no) target_optspace=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 @@ -1947,11 +2433,11 @@ esac else target_optspace= -fi; -# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. +fi + +# Check whether --enable-malloc-debugging was given. if test "${enable_malloc_debugging+set}" = set; then - enableval="$enable_malloc_debugging" - case "${enableval}" in + enableval=$enable_malloc_debugging; case "${enableval}" in yes) malloc_debugging=yes ;; no) malloc_debugging=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 @@ -1960,11 +2446,11 @@ esac else malloc_debugging= -fi; -# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. +fi + +# Check whether --enable-newlib-multithread was given. if test "${enable_newlib_multithread+set}" = set; then - enableval="$enable_newlib_multithread" - case "${enableval}" in + enableval=$enable_newlib_multithread; case "${enableval}" in yes) newlib_multithread=yes ;; no) newlib_multithread=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 @@ -1973,11 +2459,11 @@ esac else newlib_multithread=yes -fi; -# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. +fi + +# Check whether --enable-newlib-iconv was given. if test "${enable_newlib_iconv+set}" = set; then - enableval="$enable_newlib_iconv" - if test "${newlib_iconv+set}" != set; then + enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then case "${enableval}" in yes) newlib_iconv=yes ;; no) newlib_iconv=no ;; @@ -1988,11 +2474,11 @@ fi else newlib_iconv=${newlib_iconv} -fi; -# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. +fi + +# Check whether --enable-newlib-elix-level was given. if test "${enable_newlib_elix_level+set}" = set; then - enableval="$enable_newlib_elix_level" - case "${enableval}" in + enableval=$enable_newlib_elix_level; case "${enableval}" in 0) newlib_elix_level=0 ;; 1) newlib_elix_level=1 ;; 2) newlib_elix_level=2 ;; @@ -2004,11 +2490,11 @@ esac else newlib_elix_level=0 -fi; -# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. +fi + +# Check whether --enable-newlib-io-float was given. if test "${enable_newlib_io_float+set}" = set; then - enableval="$enable_newlib_io_float" - case "${enableval}" in + enableval=$enable_newlib_io_float; case "${enableval}" in yes) newlib_io_float=yes ;; no) newlib_io_float=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 @@ -2017,11 +2503,11 @@ esac else newlib_io_float=yes -fi; -# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. +fi + +# Check whether --enable-newlib-supplied-syscalls was given. if test "${enable_newlib_supplied_syscalls+set}" = set; then - enableval="$enable_newlib_supplied_syscalls" - case "${enableval}" in + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in yes) newlib_may_supply_syscalls=yes ;; no) newlib_may_supply_syscalls=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 @@ -2030,7 +2516,8 @@ esac else newlib_may_supply_syscalls=yes -fi; +fi + if test x${newlib_may_supply_syscalls} = xyes; then @@ -2056,26 +2543,41 @@ fi -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} { (exit 1); exit 1; }; } +fi fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac @@ -2128,8 +2630,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2142,32 +2644,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2180,27 +2684,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - STRIP=$ac_ct_STRIP + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi else STRIP="$ac_cv_prog_STRIP" fi @@ -2235,8 +2753,8 @@ # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2249,30 +2767,32 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + depcc="$CC" am_compiler_list= -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2361,8 +2881,8 @@ fi fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type @@ -2381,8 +2901,8 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2396,7 +2916,7 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue @@ -2407,6 +2927,7 @@ fi done done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -2424,20 +2945,21 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 -echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 +echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2457,8 +2979,8 @@ ac_cv_c_compiler_gnu=no fi fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } if test $ac_cv_c_compiler_gnu = yes; then GCC=yes @@ -2467,13 +2989,16 @@ CFLAGS= ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -2489,38 +3014,118 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -2552,8 +3157,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2566,32 +3171,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AS="${ac_tool_prefix}as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AS=$ac_cv_prog_AS if test -n "$AS"; then - echo "$as_me:$LINENO: result: $AS" >&5 -echo "${ECHO_T}$AS" >&6 + { echo "$as_me:$LINENO: result: $AS" >&5 +echo "${ECHO_T}$AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AS"; then ac_ct_AS=$AS # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2604,26 +3211,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AS="as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_AS=$ac_cv_prog_ac_ct_AS if test -n "$ac_ct_AS"; then - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -echo "${ECHO_T}$ac_ct_AS" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +echo "${ECHO_T}$ac_ct_AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AS=$ac_ct_AS + if test "x$ac_ct_AS" = x; then + AS="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi else AS="$ac_cv_prog_AS" fi @@ -2631,8 +3253,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2645,32 +3267,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 + { echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2683,26 +3307,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AR=$ac_ct_AR + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi else AR="$ac_cv_prog_AR" fi @@ -2710,8 +3349,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2724,32 +3363,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 + { echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2762,27 +3403,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - RANLIB=$ac_ct_RANLIB + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi else RANLIB="$ac_cv_prog_RANLIB" fi @@ -2790,8 +3445,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. set dummy ${ac_tool_prefix}readelf; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_READELF+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2804,32 +3459,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_READELF="${ac_tool_prefix}readelf" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi READELF=$ac_cv_prog_READELF if test -n "$READELF"; then - echo "$as_me:$LINENO: result: $READELF" >&5 -echo "${ECHO_T}$READELF" >&6 + { echo "$as_me:$LINENO: result: $READELF" >&5 +echo "${ECHO_T}$READELF" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_READELF"; then ac_ct_READELF=$READELF # Extract the first word of "readelf", so it can be a program name with args. set dummy readelf; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2842,27 +3499,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_READELF="readelf" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":" fi fi ac_ct_READELF=$ac_cv_prog_ac_ct_READELF if test -n "$ac_ct_READELF"; then - echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 -echo "${ECHO_T}$ac_ct_READELF" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 +echo "${ECHO_T}$ac_ct_READELF" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - READELF=$ac_ct_READELF + if test "x$ac_ct_READELF" = x; then + READELF=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + READELF=$ac_ct_READELF + fi else READELF="$ac_cv_prog_READELF" fi @@ -2881,8 +3552,8 @@ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -2904,7 +3575,7 @@ # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -2923,21 +3594,22 @@ ;; esac done +IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -2951,17 +3623,17 @@ # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */ ac_given_INSTALL=$INSTALL -echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 - # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } + # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then - enableval="$enable_maintainer_mode" - USE_MAINTAINER_MODE=$enableval + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no -fi; - echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 +fi + + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then @@ -3081,64 +3753,89 @@ -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 -if test "${lt_cv_path_SED+set}" = set; then +{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } +if test "${ac_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" | sed 99q >conftest.sed + $as_unset ac_script || ac_script= + # Extract the first word of "sed gsed" to use in msg output +if test -z "$SED"; then +set dummy sed gsed; ac_prog_name=$2 +if test "${ac_cv_path_SED+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. + ac_path_SED_found=false +# Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue + # Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_SED_found && break 3 done done +done +IFS=$as_save_IFS + + +fi + +SED="$ac_cv_path_SED" +if test -z "$SED"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } fi -SED=$lt_cv_path_SED +else + ac_cv_path_SED=$SED +fi -echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6 +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 +echo "${ECHO_T}$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" @@ -3161,8 +3858,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3175,32 +3872,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AS="${ac_tool_prefix}as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AS=$ac_cv_prog_AS if test -n "$AS"; then - echo "$as_me:$LINENO: result: $AS" >&5 -echo "${ECHO_T}$AS" >&6 + { echo "$as_me:$LINENO: result: $AS" >&5 +echo "${ECHO_T}$AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AS"; then ac_ct_AS=$AS # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3213,27 +3912,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AS="as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false" fi fi ac_ct_AS=$ac_cv_prog_ac_ct_AS if test -n "$ac_ct_AS"; then - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -echo "${ECHO_T}$ac_ct_AS" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +echo "${ECHO_T}$ac_ct_AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AS=$ac_ct_AS + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi else AS="$ac_cv_prog_AS" fi @@ -3241,8 +3954,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DLLTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3255,32 +3968,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then - echo "$as_me:$LINENO: result: $DLLTOOL" >&5 -echo "${ECHO_T}$DLLTOOL" >&6 + { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 +echo "${ECHO_T}$DLLTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3293,27 +4008,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false" fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then - echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 -echo "${ECHO_T}$ac_ct_DLLTOOL" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 +echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - DLLTOOL=$ac_ct_DLLTOOL + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi @@ -3321,8 +4050,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3335,32 +4064,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -echo "${ECHO_T}$OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +echo "${ECHO_T}$OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3373,27 +4104,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OBJDUMP=$ac_ct_OBJDUMP + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi @@ -3454,8 +4199,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3468,32 +4213,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3506,36 +4253,51 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3548,98 +4310,59 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + + fi fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC +if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else + ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -3657,22 +4380,23 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3685,36 +4409,38 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3727,29 +4453,45 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$ac_ct_CC" && break done - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi fi @@ -3762,21 +4504,35 @@ { (exit 1); exit 1; }; } # Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 +echo "$as_me:$LINENO: checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } @@ -3801,47 +4557,77 @@ # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 +# +# List of possible output files, starting from the most likely. +# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) +# only as a last resort. b.out is created by i960 compilers. +ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' +# +# The IRIX 6 linker writes into existing files which may not be +# executable, retaining their permissions. Remove them first so a +# subsequent execution test works. +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link_default") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. break;; * ) break;; esac done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else + ac_file='' +fi + +{ echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6; } +if test -z "$ac_file"; then echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 @@ -3853,19 +4639,21 @@ fi ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -3884,22 +4672,27 @@ fi fi fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } +{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6; } + +{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then @@ -3910,9 +4703,8 @@ for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext break;; * ) break;; esac @@ -3926,14 +4718,14 @@ fi rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3953,14 +4745,20 @@ } _ACEOF rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac @@ -3978,12 +4776,12 @@ rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4006,50 +4804,49 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_compiler_gnu=no + ac_compiler_gnu=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -4065,38 +4862,118 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no + fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -4112,12 +4989,12 @@ CFLAGS= fi fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then +{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_prog_cc_stdc=no + ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -4151,12 +5028,17 @@ /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get + as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ + that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; @@ -4171,205 +5053,57 @@ return 0; } _ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break done -rm -f conftest.$ac_ext conftest.$ac_objext +rm -f conftest.$ac_ext CC=$ac_save_CC fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6; } ;; + xno) + { echo "$as_me:$LINENO: result: unsupported" >&5 +echo "${ECHO_T}unsupported" >&6; } ;; *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; + CC="$CC $ac_cv_prog_cc_c89" + { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; esac -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -4378,8 +5112,8 @@ depcc="$CC" am_compiler_list= -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4461,58 +5195,273 @@ fi done - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + + +if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Extract the first word of "grep ggrep" to use in msg output +if test -z "$GREP"; then +set dummy grep ggrep; ac_prog_name=$2 +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_GREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue + # Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_GREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +GREP="$ac_cv_path_GREP" +if test -z "$GREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_GREP=$GREP +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +echo "${ECHO_T}$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + # Extract the first word of "egrep" to use in msg output +if test -z "$EGREP"; then +set dummy egrep; ac_prog_name=$2 +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_EGREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue + # Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_EGREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +EGREP="$ac_cv_path_EGREP" +if test -z "$EGREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_EGREP=$EGREP +fi + + + fi +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ echo "$as_me:$LINENO: checking for fgrep" >&5 +echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } +if test "${ac_cv_path_FGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + # Extract the first word of "fgrep" to use in msg output +if test -z "$FGREP"; then +set dummy fgrep; ac_prog_name=$2 +if test "${ac_cv_path_FGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_FGREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue + # Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + -fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + $ac_path_FGREP_found && break 3 + done +done +done +IFS=$as_save_IFS -if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= fi +FGREP="$ac_cv_path_FGREP" +if test -z "$FGREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi + ac_cv_path_FGREP=$FGREP fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep -echo "$as_me:$LINENO: checking for fgrep" >&5 -echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 -if test "${ac_cv_prog_fgrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1 - then ac_cv_prog_fgrep='grep -F' - else ac_cv_prog_fgrep='fgrep' - fi + fi fi -echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5 -echo "${ECHO_T}$ac_cv_prog_fgrep" >&6 - FGREP=$ac_cv_prog_fgrep +{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 +echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep @@ -4535,18 +5484,18 @@ -# Check whether --with-gnu-ld or --without-gnu-ld was given. +# Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no -fi; +fi + ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw @@ -4575,11 +5524,11 @@ ;; esac elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for GNU ld" >&5 +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } fi if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -4612,17 +5561,17 @@ LD="$lt_cv_path_LD" if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 + { echo "$as_me:$LINENO: result: $LD" >&5 +echo "${ECHO_T}$LD" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4636,8 +5585,8 @@ ;; esac fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld @@ -4648,8 +5597,8 @@ -echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 -echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 +echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } if test "${lt_cv_path_NM+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4697,8 +5646,8 @@ : ${lt_cv_path_NM=no} fi fi -echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -echo "${ECHO_T}$lt_cv_path_NM" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +echo "${ECHO_T}$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else @@ -4708,8 +5657,8 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DUMPBIN+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4722,25 +5671,27 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then - echo "$as_me:$LINENO: result: $DUMPBIN" >&5 -echo "${ECHO_T}$DUMPBIN" >&6 + { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 +echo "${ECHO_T}$DUMPBIN" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$DUMPBIN" && break done fi @@ -4750,8 +5701,8 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4764,30 +5715,45 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then - echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 -echo "${ECHO_T}$ac_ct_DUMPBIN" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 +echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$ac_ct_DUMPBIN" && break done -test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":" - DUMPBIN=$ac_ct_DUMPBIN + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi fi @@ -4802,43 +5768,43 @@ -echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 -echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 +echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } if test "${lt_cv_nm_interface+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:4812: $ac_compile\"" >&5) + (eval echo "\"\$as_me:5778: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:4815: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:5781: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:4818: output\"" >&5) + (eval echo "\"\$as_me:5784: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 -echo "${ECHO_T}$lt_cv_nm_interface" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 +echo "${ECHO_T}$lt_cv_nm_interface" >&6; } -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 + { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +echo "${ECHO_T}no, using $LN_S" >&6; } fi # find the maximum length of command line arguments -echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } if test "${lt_cv_sys_max_cmd_len+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4957,11 +5923,11 @@ fi if test -n $lt_cv_sys_max_cmd_len ; then - echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 + { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } else - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 + { echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len @@ -4974,8 +5940,8 @@ : ${MV="mv -f"} : ${RM="rm -f"} -echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 -echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 +echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" @@ -4984,18 +5950,18 @@ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes -echo "$as_me:$LINENO: result: $xsi_shell" >&5 -echo "${ECHO_T}$xsi_shell" >&6 +{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 +echo "${ECHO_T}$xsi_shell" >&6; } -echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 -echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 +echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes -echo "$as_me:$LINENO: result: $lt_shell_append" >&5 -echo "${ECHO_T}$lt_shell_append" >&6 +{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 +echo "${ECHO_T}$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then @@ -5029,15 +5995,15 @@ -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } if test "${lt_cv_ld_reload_flag+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_ld_reload_flag='-r' fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; @@ -5065,8 +6031,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5079,32 +6045,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -echo "${ECHO_T}$OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +echo "${ECHO_T}$OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5117,27 +6085,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OBJDUMP=$ac_ct_OBJDUMP + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi @@ -5149,8 +6131,8 @@ -echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 -echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } if test "${lt_cv_deplibs_check_method+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5345,8 +6327,8 @@ esac fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown @@ -5365,8 +6347,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5379,32 +6361,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 + { echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5417,27 +6401,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AR=$ac_ct_AR + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi else AR="$ac_cv_prog_AR" fi @@ -5458,8 +6456,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5472,32 +6470,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5510,27 +6510,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - STRIP=$ac_ct_STRIP + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi else STRIP="$ac_cv_prog_STRIP" fi @@ -5545,8 +6559,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5559,32 +6573,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 + { echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5597,27 +6613,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - RANLIB=$ac_ct_RANLIB + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi else RANLIB="$ac_cv_prog_RANLIB" fi @@ -5690,8 +6720,8 @@ # Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5910,11 +6940,11 @@ lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 + { echo "$as_me:$LINENO: result: failed" >&5 +echo "${ECHO_T}failed" >&6; } else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 + { echo "$as_me:$LINENO: result: ok" >&5 +echo "${ECHO_T}ok" >&6; } fi @@ -5939,11 +6969,11 @@ -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +# Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" + enableval=$enable_libtool_lock; +fi -fi; test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good @@ -5970,7 +7000,7 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 5973 "configure"' > conftest.$ac_ext + echo '#line 7003 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -6062,8 +7092,8 @@ # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } if test "${lt_cv_cc_needs_belf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6089,35 +7119,32 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_cv_cc_needs_belf=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -lt_cv_cc_needs_belf=no + lt_cv_cc_needs_belf=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -6126,8 +7153,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" @@ -6166,8 +7193,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6180,32 +7207,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then - echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -echo "${ECHO_T}$DSYMUTIL" >&6 + { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +echo "${ECHO_T}$DSYMUTIL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6218,27 +7247,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":" fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then - echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - DSYMUTIL=$ac_ct_DSYMUTIL + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi @@ -6246,8 +7289,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6260,32 +7303,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then - echo "$as_me:$LINENO: result: $NMEDIT" >&5 -echo "${ECHO_T}$NMEDIT" >&6 + { echo "$as_me:$LINENO: result: $NMEDIT" >&5 +echo "${ECHO_T}$NMEDIT" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6298,27 +7343,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":" fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then - echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -echo "${ECHO_T}$ac_ct_NMEDIT" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - NMEDIT=$ac_ct_NMEDIT + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi else NMEDIT="$ac_cv_prog_NMEDIT" fi @@ -6326,8 +7385,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_LIPO+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6340,32 +7399,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then - echo "$as_me:$LINENO: result: $LIPO" >&5 -echo "${ECHO_T}$LIPO" >&6 + { echo "$as_me:$LINENO: result: $LIPO" >&5 +echo "${ECHO_T}$LIPO" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6378,27 +7439,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":" fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then - echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 -echo "${ECHO_T}$ac_ct_LIPO" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 +echo "${ECHO_T}$ac_ct_LIPO" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - LIPO=$ac_ct_LIPO + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi else LIPO="$ac_cv_prog_LIPO" fi @@ -6406,8 +7481,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6420,32 +7495,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then - echo "$as_me:$LINENO: result: $OTOOL" >&5 -echo "${ECHO_T}$OTOOL" >&6 + { echo "$as_me:$LINENO: result: $OTOOL" >&5 +echo "${ECHO_T}$OTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6458,27 +7535,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":" fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then - echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 -echo "${ECHO_T}$ac_ct_OTOOL" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 +echo "${ECHO_T}$ac_ct_OTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OTOOL=$ac_ct_OTOOL + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi else OTOOL="$ac_cv_prog_OTOOL" fi @@ -6486,8 +7577,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OTOOL64+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6500,32 +7591,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then - echo "$as_me:$LINENO: result: $OTOOL64" >&5 -echo "${ECHO_T}$OTOOL64" >&6 + { echo "$as_me:$LINENO: result: $OTOOL64" >&5 +echo "${ECHO_T}$OTOOL64" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6538,27 +7631,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":" fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then - echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 -echo "${ECHO_T}$ac_ct_OTOOL64" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 +echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OTOOL64=$ac_ct_OTOOL64 + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi else OTOOL64="$ac_cv_prog_OTOOL64" fi @@ -6589,8 +7696,8 @@ - echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 -echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } if test "${lt_cv_apple_cc_single_mod+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6616,10 +7723,10 @@ rm -f conftest.* fi fi -echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 -echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6 - echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 -echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } + { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } if test "${lt_cv_ld_exported_symbols_list+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6643,41 +7750,38 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_cv_ld_exported_symbols_list=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -lt_cv_ld_exported_symbols_list=no + lt_cv_ld_exported_symbols_list=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi -echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; @@ -6718,8 +7822,8 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -6753,24 +7857,22 @@ #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : else echo "$as_me: failed program was:" >&5 @@ -6779,9 +7881,10 @@ # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -6791,24 +7894,22 @@ /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else @@ -6819,6 +7920,7 @@ ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done @@ -6836,8 +7938,8 @@ else ac_cv_prog_CPP=$CPP fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 +{ echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do @@ -6860,24 +7962,22 @@ #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : else echo "$as_me: failed program was:" >&5 @@ -6886,9 +7986,10 @@ # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -6898,24 +7999,22 @@ /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else @@ -6926,6 +8025,7 @@ ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done @@ -6948,8 +8048,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6973,35 +8073,31 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_header_stdc=no + ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. @@ -7057,6 +8153,7 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include +#include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) @@ -7076,18 +8173,27 @@ for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); + return 2; + return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -7100,12 +8206,14 @@ ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF @@ -7128,9 +8236,9 @@ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -7144,38 +8252,35 @@ #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" + eval "$as_ac_Header=no" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 @@ -7190,9 +8295,9 @@ for ac_header in dlfcn.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -7206,38 +8311,35 @@ #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" + eval "$as_ac_Header=no" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 @@ -7257,10 +8359,9 @@ - # Check whether --enable-shared or --disable-shared was given. + # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} + enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; @@ -7279,7 +8380,8 @@ esac else enable_shared=yes -fi; +fi + @@ -7288,10 +8390,9 @@ - # Check whether --enable-static or --disable-static was given. + # Check whether --enable-static was given. if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} + enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; @@ -7310,7 +8411,8 @@ esac else enable_static=yes -fi; +fi + @@ -7320,13 +8422,13 @@ -# Check whether --with-pic or --without-pic was given. +# Check whether --with-pic was given. if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" + withval=$with_pic; pic_mode="$withval" else pic_mode=default -fi; +fi + test -z "$pic_mode" && pic_mode=default @@ -7336,10 +8438,9 @@ - # Check whether --enable-fast-install or --disable-fast-install was given. + # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} + enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; @@ -7358,7 +8459,8 @@ esac else enable_fast_install=yes -fi; +fi + @@ -7418,8 +8520,8 @@ setopt NO_GLOB_SUBST fi -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for objdir" >&5 +echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } if test "${lt_cv_objdir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7433,8 +8535,8 @@ fi rmdir .libs 2>/dev/null fi -echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -echo "${ECHO_T}$lt_cv_objdir" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +echo "${ECHO_T}$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir @@ -7526,8 +8628,8 @@ case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7579,11 +8681,11 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi @@ -7592,8 +8694,8 @@ if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for file" >&5 +echo $ECHO_N "checking for file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7645,11 +8747,11 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi @@ -7729,8 +8831,8 @@ if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag=' -fno-builtin' - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7747,11 +8849,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7750: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8852: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7754: \$? = $ac_status" >&5 + echo "$as_me:8856: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -7764,8 +8866,8 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" @@ -7784,8 +8886,8 @@ lt_prog_compiler_pic= lt_prog_compiler_static= -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' @@ -8056,8 +9158,8 @@ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic" >&6 +{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } @@ -8068,8 +9170,8 @@ # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8086,11 +9188,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8089: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9191: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:8093: \$? = $ac_status" >&5 + echo "$as_me:9195: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -8103,8 +9205,8 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in @@ -8127,8 +9229,8 @@ # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8155,8 +9257,8 @@ LDFLAGS="$save_LDFLAGS" fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : @@ -8170,8 +9272,8 @@ - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8191,11 +9293,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8194: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9296: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:8198: \$? = $ac_status" >&5 + echo "$as_me:9300: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8217,16 +9319,16 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8246,11 +9348,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8249: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9351: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:8253: \$? = $ac_status" >&5 + echo "$as_me:9355: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8272,8 +9374,8 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } @@ -8281,16 +9383,16 @@ hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 + { echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} @@ -8305,8 +9407,8 @@ - echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag= @@ -8763,27 +9865,23 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { @@ -8801,8 +9899,10 @@ echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi @@ -8832,27 +9932,23 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { @@ -8870,8 +9966,10 @@ echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi @@ -9088,35 +10186,33 @@ int foo(void) {} _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" else @@ -9373,8 +10469,8 @@ fi fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 +{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +echo "${ECHO_T}$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld @@ -9410,46 +10506,52 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } +if test "${lt_cv_archive_cmds_need_lc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -echo "${ECHO_T}$archive_cmds_need_lc" >&6 + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 +echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi @@ -9612,8 +10714,8 @@ - echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } if test "$GCC" = yes; then case $host_os in @@ -10029,12 +11131,17 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no + # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat >conftest.$ac_ext <<_ACEOF + if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -10050,40 +11157,42 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then - shlibpath_overrides_runpath=yes + lt_cv_shlibpath_overrides_runpath=yes fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -10293,8 +11402,8 @@ dynamic_linker=no ;; esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 +{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" @@ -10395,8 +11504,8 @@ - echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || @@ -10420,8 +11529,8 @@ # directories. hardcode_action=unsupported fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 +{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 +echo "${ECHO_T}$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then @@ -10465,8 +11574,8 @@ darwin*) # if libdl is installed we need to link against it - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10479,56 +11588,53 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else @@ -10542,8 +11648,8 @@ ;; *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } if test "${ac_cv_func_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10570,73 +11676,64 @@ #undef shl_load -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shl_load (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) +#if defined __stub_shl_load || defined __stub___shl_load choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != shl_load; +return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_shl_load=no + ac_cv_func_shl_load=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } if test $ac_cv_func_shl_load = yes; then lt_cv_dlopen="shl_load" else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10649,61 +11746,58 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shl_load (); int main () { -shl_load (); +return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dld_shl_load=no + ac_cv_lib_dld_shl_load=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } if test $ac_cv_lib_dld_shl_load = yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } if test "${ac_cv_func_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10730,73 +11824,64 @@ #undef dlopen -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) +#if defined __stub_dlopen || defined __stub___dlopen choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != dlopen; +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_dlopen=no + ac_cv_func_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } if test $ac_cv_func_dlopen = yes; then lt_cv_dlopen="dlopen" else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10809,61 +11894,58 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10876,61 +11958,58 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_svld_dlopen=no + ac_cv_lib_svld_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } if test $ac_cv_lib_svld_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10943,56 +12022,53 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dld_link (); int main () { -dld_link (); +return dld_link (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dld_dld_link=no + ac_cv_lib_dld_dld_link=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } if test $ac_cv_lib_dld_dld_link = yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi @@ -11032,8 +12108,8 @@ save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11043,7 +12119,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11046 "configure" +#line 12122 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11123,13 +12199,13 @@ fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self_static+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11139,7 +12215,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11142 "configure" +#line 12218 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11219,8 +12295,8 @@ fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" @@ -11258,13 +12334,13 @@ striplib= old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in @@ -11272,16 +12348,16 @@ if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi ;; *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } ;; esac fi @@ -11298,13 +12374,13 @@ # Report which library types will actually be built - echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 + { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } + { echo "$as_me:$LINENO: result: $can_build_shared" >&5 +echo "${ECHO_T}$can_build_shared" >&6; } - echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and @@ -11324,15 +12400,15 @@ fi ;; esac - echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 + { echo "$as_me:$LINENO: result: $enable_shared" >&5 +echo "${ECHO_T}$enable_shared" >&6; } - echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes - echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 + { echo "$as_me:$LINENO: result: $enable_static" >&5 +echo "${ECHO_T}$enable_static" >&6; } @@ -11358,7 +12434,7 @@ - ac_config_commands="$ac_config_commands libtool" + ac_config_commands="$ac_config_commands libtool" @@ -11370,161 +12446,85 @@ if test -n "${machine_dir}"; then case ${machine_dir} in - a29k) - -subdirs="$subdirs a29k" + a29k) subdirs="$subdirs a29k" ;; - arm) - -subdirs="$subdirs arm" + arm) subdirs="$subdirs arm" ;; - bfin) - -subdirs="$subdirs bfin" + avr32) subdirs="$subdirs avr32" ;; - cris) - -subdirs="$subdirs cris" + bfin) subdirs="$subdirs bfin" ;; - crx) - -subdirs="$subdirs crx" + cris) subdirs="$subdirs cris" ;; - d10v) - -subdirs="$subdirs d10v" + crx) subdirs="$subdirs crx" ;; - d30v) - -subdirs="$subdirs d30v" + d10v) subdirs="$subdirs d10v" ;; - fr30) - -subdirs="$subdirs fr30" + d30v) subdirs="$subdirs d30v" ;; - frv) - -subdirs="$subdirs frv" + fr30) subdirs="$subdirs fr30" ;; - h8300) - -subdirs="$subdirs h8300" + frv) subdirs="$subdirs frv" ;; - h8500) - -subdirs="$subdirs h8500" + h8300) subdirs="$subdirs h8300" ;; - hppa) - -subdirs="$subdirs hppa" + h8500) subdirs="$subdirs h8500" ;; - i386) - -subdirs="$subdirs i386" + hppa) subdirs="$subdirs hppa" ;; - i960) - -subdirs="$subdirs i960" + i386) subdirs="$subdirs i386" ;; - iq2000) - -subdirs="$subdirs iq2000" + i960) subdirs="$subdirs i960" ;; - lm32) - -subdirs="$subdirs lm32" + iq2000) subdirs="$subdirs iq2000" ;; - m32c) - -subdirs="$subdirs m32c" + lm32) subdirs="$subdirs lm32" ;; - m32r) - -subdirs="$subdirs m32r" + m32c) subdirs="$subdirs m32c" ;; - m68hc11) - -subdirs="$subdirs m68hc11" + m32r) subdirs="$subdirs m32r" ;; - m68k) - -subdirs="$subdirs m68k" + m68hc11) subdirs="$subdirs m68hc11" ;; - m88k) - -subdirs="$subdirs m88k" + m68k) subdirs="$subdirs m68k" ;; - mep ) - -subdirs="$subdirs mep" + m88k) subdirs="$subdirs m88k" ;; - mips) - -subdirs="$subdirs mips" + mep ) subdirs="$subdirs mep" ;; - mn10200) - -subdirs="$subdirs mn10200" + mips) subdirs="$subdirs mips" ;; - mn10300) - -subdirs="$subdirs mn10300" + mn10200) subdirs="$subdirs mn10200" ;; - mt) - -subdirs="$subdirs mt" + mn10300) subdirs="$subdirs mn10300" ;; - necv70) - -subdirs="$subdirs necv70" + mt) subdirs="$subdirs mt" ;; - powerpc) - -subdirs="$subdirs powerpc" + necv70) subdirs="$subdirs necv70" ;; - sh) - -subdirs="$subdirs sh" + powerpc) subdirs="$subdirs powerpc" ;; - sparc) - -subdirs="$subdirs sparc" + sh) subdirs="$subdirs sh" ;; - spu) - -subdirs="$subdirs spu" + sparc) subdirs="$subdirs sparc" ;; - tic4x) - -subdirs="$subdirs tic4x" + spu) subdirs="$subdirs spu" ;; - tic80) - -subdirs="$subdirs tic80" + tic4x) subdirs="$subdirs tic4x" ;; - v850) - -subdirs="$subdirs v850" + tic80) subdirs="$subdirs tic80" ;; - w65) - -subdirs="$subdirs w65" + v850) subdirs="$subdirs v850" ;; - x86_64) - -subdirs="$subdirs x86_64" + w65) subdirs="$subdirs w65" ;; - xscale) - -subdirs="$subdirs xscale" + x86_64) subdirs="$subdirs x86_64" ;; - xstormy16) - -subdirs="$subdirs xstormy16" + xscale) subdirs="$subdirs xscale" ;; - z8k) - -subdirs="$subdirs z8k" + xstormy16) subdirs="$subdirs xstormy16" + ;; + z8k) subdirs="$subdirs z8k" ;; esac; fi @@ -11540,7 +12540,7 @@ fi - ac_config_files="$ac_config_files Makefile" +ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -11560,39 +12560,58 @@ # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. +# So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -{ +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; + ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} | + esac | + sort +) | sed ' + /^ac_cv_env_/b end t clear - : clear + :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else - echo "not updating unwritable cache $cache_file" + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -11601,63 +12620,48 @@ # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, +# take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF +ac_script=' t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -11772,17 +12776,45 @@ ## M4sh Initialization. ## ## --------------------- ## -# Be Bourne compatible +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh fi -DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then @@ -11792,8 +12824,43 @@ fi +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + # Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done PS1='$ ' PS2='> ' PS4='+ ' @@ -11807,18 +12874,19 @@ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else - $as_unset $as_var + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false @@ -11826,159 +12894,120 @@ # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: @@ -11987,7 +13016,28 @@ as_mkdir_p=false fi -as_executable_p="test -f" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -11996,31 +13046,14 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - exec 6>&1 -# Open the log real soon, to keep \$[0] and so on meaningful, and to +# Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - +# values after options handling. +ac_log=" This file was extended by newlib $as_me 1.17.0, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.61. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -12028,30 +13061,19 @@ CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + _ACEOF +cat >>$CONFIG_STATUS <<_ACEOF # Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi +config_files="$ac_config_files" +config_commands="$ac_config_commands" -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi +_ACEOF cat >>$CONFIG_STATUS <<\_ACEOF - ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. @@ -12059,7 +13081,7 @@ Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit - -V, --version print version number, then exit + -V, --version print version number and configuration settings, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions @@ -12073,19 +13095,21 @@ $config_commands Report bugs to ." -_ACEOF +_ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ newlib config.status 1.17.0 -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" +configured by $0, generated by GNU Autoconf 2.61, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2006 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -12096,60 +13120,42 @@ do case $1 in --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; - -*) + *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; esac case $ac_option in # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; - *) ac_config_targets="$ac_config_targets $1" ;; + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; esac shift @@ -12165,17 +13171,28 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL + export CONFIG_SHELL + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + echo "$ac_log" +} >&5 +_ACEOF cat >>$CONFIG_STATUS <<_ACEOF # -# INIT-COMMANDS section. +# INIT-COMMANDS # - AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" @@ -12436,22 +13453,23 @@ _ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF + +# Handling of arguments. for ac_config_target in $ac_config_targets do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + case $ac_config_target in + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done + # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely @@ -12462,396 +13480,492 @@ fi # Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, +# simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. $debug || { - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } - # Create a (secure) tmp directory for tmp files. { - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - # -# CONFIG_FILES section. +# Set up the sed scripts for CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t -s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t -s,@newlib_basedir@,$newlib_basedir,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CYGPATH_W@,$CYGPATH_W,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@mkdir_p@,$mkdir_p,;t t -s,@AWK@,$AWK,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@am__leading_dot@,$am__leading_dot,;t t -s,@AMTAR@,$AMTAR,;t t -s,@am__tar@,$am__tar,;t t -s,@am__untar@,$am__untar,;t t -s,@CC@,$CC,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t -s,@AS@,$AS,;t t -s,@ac_ct_AS@,$ac_ct_AS,;t t -s,@AR@,$AR,;t t -s,@ac_ct_AR@,$ac_ct_AR,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@READELF@,$READELF,;t t -s,@ac_ct_READELF@,$ac_ct_READELF,;t t -s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t -s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t -s,@MAINT@,$MAINT,;t t -s,@CCAS@,$CCAS,;t t -s,@CCASFLAGS@,$CCASFLAGS,;t t -s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t -s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t -s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t -s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t -s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t -s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t -s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t -s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t -s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t -s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t -s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t -s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@oext@,$oext,;t t -s,@aext@,$aext,;t t -s,@lpfx@,$lpfx,;t t -s,@libm_machine_dir@,$libm_machine_dir,;t t -s,@machine_dir@,$machine_dir,;t t -s,@sys_dir@,$sys_dir,;t t -s,@SED@,$SED,;t t -s,@DLLTOOL@,$DLLTOOL,;t t -s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t -s,@OBJDUMP@,$OBJDUMP,;t t -s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t -s,@LIBTOOL@,$LIBTOOL,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@EGREP@,$EGREP,;t t -s,@FGREP@,$FGREP,;t t -s,@GREP@,$GREP,;t t -s,@LD@,$LD,;t t -s,@DUMPBIN@,$DUMPBIN,;t t -s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t -s,@NM@,$NM,;t t -s,@LN_S@,$LN_S,;t t -s,@lt_ECHO@,$lt_ECHO,;t t -s,@DSYMUTIL@,$DSYMUTIL,;t t -s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t -s,@NMEDIT@,$NMEDIT,;t t -s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t -s,@LIPO@,$LIPO,;t t -s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t -s,@OTOOL@,$OTOOL,;t t -s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t -s,@OTOOL64@,$OTOOL64,;t t -s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t -s,@CPP@,$CPP,;t t -s,@subdirs@,$subdirs,;t t -s,@HAVE_MACHINE_DIR_TRUE@,$HAVE_MACHINE_DIR_TRUE,;t t -s,@HAVE_MACHINE_DIR_FALSE@,$HAVE_MACHINE_DIR_FALSE,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat +if test -n "$CONFIG_FILES"; then + +_ACEOF + + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim +newlib_basedir!$newlib_basedir$ac_delim +build!$build$ac_delim +build_cpu!$build_cpu$ac_delim +build_vendor!$build_vendor$ac_delim +build_os!$build_os$ac_delim +host!$host$ac_delim +host_cpu!$host_cpu$ac_delim +host_vendor!$host_vendor$ac_delim +host_os!$host_os$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +CYGPATH_W!$CYGPATH_W$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +install_sh!$install_sh$ac_delim +STRIP!$STRIP$ac_delim +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim +mkdir_p!$mkdir_p$ac_delim +AWK!$AWK$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +am__leading_dot!$am__leading_dot$ac_delim +AMTAR!$AMTAR$ac_delim +am__tar!$am__tar$ac_delim +am__untar!$am__untar$ac_delim +CC!$CC$ac_delim +DEPDIR!$DEPDIR$ac_delim +am__include!$am__include$ac_delim +am__quote!$am__quote$ac_delim +AMDEP_TRUE!$AMDEP_TRUE$ac_delim +AMDEP_FALSE!$AMDEP_FALSE$ac_delim +AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim +CCDEPMODE!$CCDEPMODE$ac_delim +am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim +am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim +AS!$AS$ac_delim +AR!$AR$ac_delim +RANLIB!$RANLIB$ac_delim +READELF!$READELF$ac_delim +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim +MAINT!$MAINT$ac_delim +CCAS!$CCAS$ac_delim +CCASFLAGS!$CCASFLAGS$ac_delim +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim +LDFLAGS!$LDFLAGS$ac_delim +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi -fi # test -n "$CONFIG_FILES" +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi + +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +CEOF$ac_eof +_ACEOF + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim +OBJEXT!$OBJEXT$ac_delim +oext!$oext$ac_delim +aext!$aext$ac_delim +lpfx!$lpfx$ac_delim +libm_machine_dir!$libm_machine_dir$ac_delim +machine_dir!$machine_dir$ac_delim +sys_dir!$sys_dir$ac_delim +SED!$SED$ac_delim +DLLTOOL!$DLLTOOL$ac_delim +OBJDUMP!$OBJDUMP$ac_delim +LIBTOOL!$LIBTOOL$ac_delim +CFLAGS!$CFLAGS$ac_delim +CPPFLAGS!$CPPFLAGS$ac_delim +ac_ct_CC!$ac_ct_CC$ac_delim +EXEEXT!$EXEEXT$ac_delim +GREP!$GREP$ac_delim +EGREP!$EGREP$ac_delim +FGREP!$FGREP$ac_delim +LD!$LD$ac_delim +DUMPBIN!$DUMPBIN$ac_delim +ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim +NM!$NM$ac_delim +LN_S!$LN_S$ac_delim +lt_ECHO!$lt_ECHO$ac_delim +DSYMUTIL!$DSYMUTIL$ac_delim +NMEDIT!$NMEDIT$ac_delim +LIPO!$LIPO$ac_delim +OTOOL!$OTOOL$ac_delim +OTOOL64!$OTOOL64$ac_delim +CPP!$CPP$ac_delim +subdirs!$subdirs$ac_delim +HAVE_MACHINE_DIR_TRUE!$HAVE_MACHINE_DIR_TRUE$ac_delim +HAVE_MACHINE_DIR_FALSE!$HAVE_MACHINE_DIR_FALSE$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 40; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof _ACEOF + + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; +fi # test -n "$CONFIG_FILES" + + +for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + fi + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; esac - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || + ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + case $ac_mode in + :F) + # + # CONFIG_FILE + # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac +_ACEOF - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } +cat >>$CONFIG_STATUS <<\_ACEOF +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +case `sed -n '/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' $ac_file_inputs` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac _ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub @@ -12859,142 +13973,43 @@ cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } +s&@configure_input@&$configure_input&;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac + ;; -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 +echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. @@ -13004,18 +14019,29 @@ # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || + dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$mf" : 'X\(/\)' \| . 2>/dev/null || echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` else continue fi @@ -13037,49 +14063,76 @@ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || + fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$file" : 'X\(/\)' \| . 2>/dev/null || echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; - libtool ) + "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. @@ -13720,11 +14773,10 @@ chmod +x "$ofile" ;; + esac -done -_ACEOF +done # for ac_tag -cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF @@ -13754,7 +14806,7 @@ fi # -# CONFIG_SUBDIRS section, as fixed in confsubdir.m4. +# CONFIG_SUBDIRS section. # if test "$no_recursion" != yes; then @@ -13801,7 +14853,12 @@ case $ac_arg in *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - ac_sub_configure_args="$ac_arg $ac_sub_configure_args" + ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" + + # Pass --silent + if test "$silent" = yes; then + ac_sub_configure_args="--silent $ac_sub_configure_args" + fi ac_popdir=`pwd` for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue @@ -13810,97 +14867,83 @@ # parts of a large source tree are present. test -d "$srcdir/$ac_dir" || continue - { echo "$as_me:$LINENO: configuring in $ac_dir" >&5 -echo "$as_me: configuring in $ac_dir" >&6;} - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" + ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" + echo "$as_me:$LINENO: $ac_msg" >&5 + echo "$ac_msg" >&6 + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" @@ -13924,8 +14967,8 @@ # Make the cache file name correct relative to the subdirectory. case $cache_file in [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; - *) # Relative path. - ac_sub_cache_file=$ac_top_builddir$cache_file ;; + *) # Relative name. + ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; esac { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 diff -Naur newlib-1.17.0/newlib/libc/machine/configure.in newlib-1.17.0-new/newlib/libc/machine/configure.in --- newlib-1.17.0/newlib/libc/machine/configure.in 2008-12-11 21:05:38.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/machine/configure.in 2009-05-22 09:57:50.000000000 +0200 @@ -24,6 +24,7 @@ case ${machine_dir} in a29k) AC_CONFIG_SUBDIRS(a29k) ;; arm) AC_CONFIG_SUBDIRS(arm) ;; + avr32) AC_CONFIG_SUBDIRS(avr32) ;; bfin) AC_CONFIG_SUBDIRS(bfin) ;; cris) AC_CONFIG_SUBDIRS(cris) ;; crx) AC_CONFIG_SUBDIRS(crx) ;; diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4 --- newlib-1.17.0/newlib/libc/sys/avr32/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/aclocal.m4 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,366 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4-p6 + +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +dnl This provides configure definitions used by all the newlib +dnl configure.in files. + +dnl Basic newlib configury. This calls basic introductory stuff, +dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs +dnl configure.host. The only argument is the relative path to the top +dnl newlib directory. + +AC_DEFUN(NEWLIB_CONFIGURE, +[ +dnl Default to --enable-multilib +AC_ARG_ENABLE(multilib, +[ --enable-multilib build many library versions (default)], +[case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; + esac], [multilib=yes])dnl + +dnl Support --enable-target-optspace +AC_ARG_ENABLE(target-optspace, +[ --enable-target-optspace optimize for space], +[case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; + esac], [target_optspace=])dnl + +dnl Support --enable-malloc-debugging - currently only supported for Cygwin +AC_ARG_ENABLE(malloc-debugging, +[ --enable-malloc-debugging indicate malloc debugging requested], +[case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; + esac], [malloc_debugging=])dnl + +dnl Support --enable-newlib-multithread +AC_ARG_ENABLE(newlib-multithread, +[ --enable-newlib-multithread enable support for multiple threads], +[case "${enableval}" in + yes) newlib_multithread=yes ;; + no) newlib_multithread=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; + esac], [newlib_multithread=yes])dnl + +dnl Support --enable-newlib-iconv +AC_ARG_ENABLE(newlib-iconv, +[ --enable-newlib-iconv enable iconv library support], +[if test "${newlib_iconv+set}" != set; then + case "${enableval}" in + yes) newlib_iconv=yes ;; + no) newlib_iconv=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;; + esac + fi], [newlib_iconv=${newlib_iconv}])dnl + +dnl Support --enable-newlib-elix-level +AC_ARG_ENABLE(newlib-elix-level, +[ --enable-newlib-elix-level supply desired elix library level (1-4)], +[case "${enableval}" in + 0) newlib_elix_level=0 ;; + 1) newlib_elix_level=1 ;; + 2) newlib_elix_level=2 ;; + 3) newlib_elix_level=3 ;; + 4) newlib_elix_level=4 ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; + esac], [newlib_elix_level=0])dnl + +dnl Support --disable-newlib-io-float +AC_ARG_ENABLE(newlib-io-float, +[ --disable-newlib-io-float disable printf/scanf family float support], +[case "${enableval}" in + yes) newlib_io_float=yes ;; + no) newlib_io_float=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; + esac], [newlib_io_float=yes])dnl + +dnl Support --disable-newlib-supplied-syscalls +AC_ARG_ENABLE(newlib-supplied-syscalls, +[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], +[case "${enableval}" in + yes) newlib_may_supply_syscalls=yes ;; + no) newlib_may_supply_syscalls=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; + esac], [newlib_may_supply_syscalls=yes])dnl + +AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) + +dnl We may get other options which we don't document: +dnl --with-target-subdir, --with-multisrctop, --with-multisubdir + +test -z "[$]{with_target_subdir}" && with_target_subdir=. + +if test "[$]{srcdir}" = "."; then + if test "[$]{with_target_subdir}" != "."; then + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" + else + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" + fi +else + newlib_basedir="[$]{srcdir}/$1" +fi +AC_SUBST(newlib_basedir) + +AC_CANONICAL_SYSTEM + +AM_INIT_AUTOMAKE(newlib, 1.14.0.atmel.1.0.1) + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + +AC_DEFUN(LIB_AC_PROG_CC, +[AC_BEFORE([$0], [AC_PROG_CPP])dnl +AC_CHECK_PROG(CC, gcc, gcc) +if test -z "$CC"; then + AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) + test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) +fi + +AC_PROG_CC_GNU + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +dnl Check whether -g works, even if CFLAGS is set, in case the package +dnl plays around with CFLAGS (such as to build both debugging and +dnl normal versions of a library), tasteless as that idea is. + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + AC_PROG_CC_G + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi +]) + +LIB_AC_PROG_CC + +AC_CHECK_TOOL(AS, as) +AC_CHECK_TOOL(AR, ar) +AC_CHECK_TOOL(RANLIB, ranlib, :) + +AC_PROG_INSTALL + +AM_MAINTAINER_MODE + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +if false; then + AC_EXEEXT +fi + +. [$]{newlib_basedir}/configure.host + +newlib_cflags="[$]{newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} +AC_SUBST(NEWLIB_CFLAGS) + +LDFLAGS=${ldflags} +AC_SUBST(LDFLAGS) + +AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) +AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) +AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) +AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) +AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) + +AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) + +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we +# use oext, which is set in configure.host based on the target platform. +OBJEXT=${oext} + +AC_SUBST(OBJEXT) +AC_SUBST(oext) +AC_SUBST(aext) + +AC_SUBST(libm_machine_dir) +AC_SUBST(machine_dir) +AC_SUBST(sys_dir) +]) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) + +# Copyright 2002 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.4-p6])]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN([AM_MISSING_PROG], +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Define a conditional. + +AC_DEFUN([AM_CONDITIONAL], +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h --- newlib-1.17.0/newlib/libc/sys/avr32/confdefs.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/confdefs.h 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1 @@ + diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure newlib-1.17.0-new/newlib/libc/sys/avr32/configure --- newlib-1.17.0/newlib/libc/sys/avr32/configure 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,3922 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION. +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='newlib' +PACKAGE_TARNAME='newlib' +PACKAGE_VERSION='NEWLIB_VERSION' +PACKAGE_STRING='newlib NEWLIB_VERSION' +PACKAGE_BUGREPORT='' + +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +MAY_SUPPLY_SYSCALLS_TRUE +MAY_SUPPLY_SYSCALLS_FALSE +newlib_basedir +build +build_cpu +build_vendor +build_os +host +host_cpu +host_vendor +host_os +target +target_cpu +target_vendor +target_os +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +SET_MAKE +CC +AS +AR +RANLIB +MAINTAINER_MODE_TRUE +MAINTAINER_MODE_FALSE +MAINT +NEWLIB_CFLAGS +LDFLAGS +ELIX_LEVEL_0_TRUE +ELIX_LEVEL_0_FALSE +ELIX_LEVEL_1_TRUE +ELIX_LEVEL_1_FALSE +ELIX_LEVEL_2_TRUE +ELIX_LEVEL_2_FALSE +ELIX_LEVEL_3_TRUE +ELIX_LEVEL_3_FALSE +ELIX_LEVEL_4_TRUE +ELIX_LEVEL_4_FALSE +USE_LIBTOOL_TRUE +USE_LIBTOOL_FALSE +OBJEXT +oext +aext +libm_machine_dir +machine_dir +sys_dir +LIBOBJS +LTLIBOBJS' +ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-multilib build many library versions (default) + --enable-target-optspace optimize for space + --enable-malloc-debugging indicate malloc debugging requested + --enable-newlib-multithread enable support for multiple threads + --enable-newlib-iconv enable iconv library support + --enable-newlib-elix-level supply desired elix library level (1-4) + --disable-newlib-io-float disable printf/scanf family float support + --disable-newlib-supplied-syscalls disable newlib from supplying syscalls + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer + +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +newlib configure NEWLIB_VERSION +generated by GNU Autoconf 2.61 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by newlib $as_me NEWLIB_VERSION, which was +generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" +else + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" +fi +shift +for ac_site_file +do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +ac_aux_dir= +for ac_dir in ../../../.. "$srcdir"/../../../..; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +{ echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +am__api_version="1.4" +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done +IFS=$as_save_IFS + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +rm -f conftest* +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm -f conftest.sed + +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } + SET_MAKE= +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + +# Check whether --enable-multilib was given. +if test "${enable_multilib+set}" = set; then + enableval=$enable_multilib; case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 +echo "$as_me: error: bad value ${enableval} for multilib option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + multilib=yes +fi + +# Check whether --enable-target-optspace was given. +if test "${enable_target_optspace+set}" = set; then + enableval=$enable_target_optspace; case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 +echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + target_optspace= +fi + +# Check whether --enable-malloc-debugging was given. +if test "${enable_malloc_debugging+set}" = set; then + enableval=$enable_malloc_debugging; case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 +echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + malloc_debugging= +fi + +# Check whether --enable-newlib-multithread was given. +if test "${enable_newlib_multithread+set}" = set; then + enableval=$enable_newlib_multithread; case "${enableval}" in + yes) newlib_multithread=yes ;; + no) newlib_multithread=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_multithread=yes +fi + +# Check whether --enable-newlib-iconv was given. +if test "${enable_newlib_iconv+set}" = set; then + enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then + case "${enableval}" in + yes) newlib_iconv=yes ;; + no) newlib_iconv=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;} + { (exit 1); exit 1; }; } ;; + esac + fi +else + newlib_iconv=${newlib_iconv} +fi + +# Check whether --enable-newlib-elix-level was given. +if test "${enable_newlib_elix_level+set}" = set; then + enableval=$enable_newlib_elix_level; case "${enableval}" in + 0) newlib_elix_level=0 ;; + 1) newlib_elix_level=1 ;; + 2) newlib_elix_level=2 ;; + 3) newlib_elix_level=3 ;; + 4) newlib_elix_level=4 ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_elix_level=0 +fi + +# Check whether --enable-newlib-io-float was given. +if test "${enable_newlib_io_float+set}" = set; then + enableval=$enable_newlib_io_float; case "${enableval}" in + yes) newlib_io_float=yes ;; + no) newlib_io_float=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_io_float=yes +fi + +# Check whether --enable-newlib-supplied-syscalls was given. +if test "${enable_newlib_supplied_syscalls+set}" = set; then + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in + yes) newlib_may_supply_syscalls=yes ;; + no) newlib_may_supply_syscalls=no ;; + *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 +echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;} + { (exit 1); exit 1; }; } ;; + esac +else + newlib_may_supply_syscalls=yes +fi + + + +if test x${newlib_may_supply_syscalls} = xyes; then + MAY_SUPPLY_SYSCALLS_TRUE= + MAY_SUPPLY_SYSCALLS_FALSE='#' +else + MAY_SUPPLY_SYSCALLS_TRUE='#' + MAY_SUPPLY_SYSCALLS_FALSE= +fi + + +test -z "${with_target_subdir}" && with_target_subdir=. + +if test "${srcdir}" = "."; then + if test "${with_target_subdir}" != "."; then + newlib_basedir="${srcdir}/${with_multisrctop}../../../.." + else + newlib_basedir="${srcdir}/${with_multisrctop}../../.." + fi +else + newlib_basedir="${srcdir}/../../.." +fi + + +{ echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6; } +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 +echo "$as_me: error: invalid value of canonical target" >&2;} + { (exit 1); exit 1; }; };; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + + +PACKAGE=newlib + +VERSION=1.14.0.atmel.1.0.1 + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } +fi + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + + + +missing_dir=`cd $ac_aux_dir && pwd` +{ echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 +echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal-${am__api_version} + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working autoconf" >&5 +echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + AUTOCONF="$missing_dir/missing autoconf" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 +echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake-${am__api_version} + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + AUTOMAKE="$missing_dir/missing automake-${am__api_version}" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working autoheader" >&5 +echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + AUTOHEADER="$missing_dir/missing autoheader" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + +{ echo "$as_me:$LINENO: checking for working makeinfo" >&5 +echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6; } +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + { echo "$as_me:$LINENO: result: found" >&5 +echo "${ECHO_T}found" >&6; } +else + MAKEINFO="$missing_dir/missing makeinfo" + { echo "$as_me:$LINENO: result: missing" >&5 +echo "${ECHO_T}missing" >&6; } +fi + + + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 +echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +fi + +#AC_PROG_CC_GNU + +if test $ac_cv_c_compiler_gnu = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= +# AC_PROG_CC_G + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AS="${ac_tool_prefix}as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { echo "$as_me:$LINENO: result: $AS" >&5 +echo "${ECHO_T}$AS" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_AS+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AS="as" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +echo "${ECHO_T}$ac_ct_AS" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done +IFS=$as_save_IFS + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +#if false; then +# +#fi + +. ${newlib_basedir}/configure.host + +newlib_cflags="${newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} + + +LDFLAGS=${ldflags} + + + + +if test x${newlib_elix_level} = x0; then + ELIX_LEVEL_0_TRUE= + ELIX_LEVEL_0_FALSE='#' +else + ELIX_LEVEL_0_TRUE='#' + ELIX_LEVEL_0_FALSE= +fi + + +if test x${newlib_elix_level} = x1; then + ELIX_LEVEL_1_TRUE= + ELIX_LEVEL_1_FALSE='#' +else + ELIX_LEVEL_1_TRUE='#' + ELIX_LEVEL_1_FALSE= +fi + + +if test x${newlib_elix_level} = x2; then + ELIX_LEVEL_2_TRUE= + ELIX_LEVEL_2_FALSE='#' +else + ELIX_LEVEL_2_TRUE='#' + ELIX_LEVEL_2_FALSE= +fi + + +if test x${newlib_elix_level} = x3; then + ELIX_LEVEL_3_TRUE= + ELIX_LEVEL_3_FALSE='#' +else + ELIX_LEVEL_3_TRUE='#' + ELIX_LEVEL_3_FALSE= +fi + + +if test x${newlib_elix_level} = x4; then + ELIX_LEVEL_4_TRUE= + ELIX_LEVEL_4_FALSE='#' +else + ELIX_LEVEL_4_TRUE='#' + ELIX_LEVEL_4_FALSE= +fi + + + +if test x${use_libtool} = xyes; then + USE_LIBTOOL_TRUE= + USE_LIBTOOL_FALSE='#' +else + USE_LIBTOOL_TRUE='#' + USE_LIBTOOL_FALSE= +fi + +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we +# use oext, which is set in configure.host based on the target platform. +OBJEXT=${oext} + + + + + + + + + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by newlib $as_me NEWLIB_VERSION, which was +generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# Files that config.status was made for. +config_files="$ac_config_files" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +newlib config.status NEWLIB_VERSION +configured by $0, generated by GNU Autoconf 2.61, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2006 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL + export CONFIG_SHELL + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# +# Set up the sed scripts for CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "$CONFIG_FILES"; then + +_ACEOF + + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim +newlib_basedir!$newlib_basedir$ac_delim +build!$build$ac_delim +build_cpu!$build_cpu$ac_delim +build_vendor!$build_vendor$ac_delim +build_os!$build_os$ac_delim +host!$host$ac_delim +host_cpu!$host_cpu$ac_delim +host_vendor!$host_vendor$ac_delim +host_os!$host_os$ac_delim +target!$target$ac_delim +target_cpu!$target_cpu$ac_delim +target_vendor!$target_vendor$ac_delim +target_os!$target_os$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +CC!$CC$ac_delim +AS!$AS$ac_delim +AR!$AR$ac_delim +RANLIB!$RANLIB$ac_delim +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim +MAINT!$MAINT$ac_delim +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim +LDFLAGS!$LDFLAGS$ac_delim +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim +OBJEXT!$OBJEXT$ac_delim +oext!$oext$ac_delim +aext!$aext$ac_delim +libm_machine_dir!$libm_machine_dir$ac_delim +machine_dir!$machine_dir$ac_delim +sys_dir!$sys_dir$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 92; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi + +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof +_ACEOF + + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF +fi # test -n "$CONFIG_FILES" + + +for ac_tag in :F $CONFIG_FILES +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + fi + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +case `sed -n '/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' $ac_file_inputs` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s&@configure_input@&$configure_input&;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac + ;; + + + + esac + +done # for ac_tag + + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/configure.in newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in --- newlib-1.17.0/newlib/libc/sys/avr32/configure.in 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/configure.in 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,13 @@ +dnl This is the newlib/libc/sys/avr32 configure.in file. +dnl Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.59) +AC_INIT([newlib],[NEWLIB_VERSION]) + +dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. +AC_CONFIG_AUX_DIR(../../../..) + +NEWLIB_CONFIGURE(../../..) + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/crt0.S newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S --- newlib-1.17.0/newlib/libc/sys/avr32/crt0.S 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/crt0.S 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,83 @@ + + .section .reset,"ax" + + .global _start + .type _start,@function +_start: + /* Jump to wherever the linker thinks we are... */ + lddpc pc, .Ltext_vaddr + + .align 2 +.Ltext_vaddr: + .word _stext + + .text + .global _stext +_stext: + /* Zero marks the end of the outermost frame. */ + mov r7, 0 + + /* Set up the stack pointer to a fixed value */ + lda.w r10, _estack + + /* If _stack is -1 don't set sp, the stack is then probably + set by some other means i.e. by a bootloader. */ + cp r10, -1 + movne sp, r10 + + /* Copy the data segment into RAM if necessary. If data_lma + is equal to data then VMA==LMA and no copying is necessary. + The linker script must make sure that the data segment is at + least dword-aligned. */ + lda.w r11, _data_lma + lda.w r12, _data + cp.w r11, r12 + breq 1f + lda.w r10, _edata +2: ld.d r8, r11++ + st.d r12++, r8 + cp.w r12, r10 + brlt 2b + + /* Zero the memory in the .bss section. */ +1: lda.w r10, _end + lda.w r12, _edata + + mov r8, 0 + mov r9, 0 +2: st.d r12++, r8 + cp.w r12, r10 + brlt 2b + + /* User dependent initialization */ + call _init_startup + + /* Register _fini function with atexit + The _fini function is responsible for calling destructiors */ + lda.w r12, _fini + call atexit + + /* Call _init in order to initialize constructors etc */ + call _init + + /*Initialize argv, use stack for keeping arguments. + _init_argv() returns argc in r12 and argv in r11 + and the total size used for the arguments in r10.*/ + mov r12, sp + /* Signal that we are storing the arguments in a stackwise + top down approach. */ + mov r11, 0 + call _init_argv + /* If initialization if argv is not handled then _init_argv + returns -1 so set argc to 0 and make sure no space is + allocated on the stack. */ + cp.w r12, -1 + moveq r12, 0 + moveq r10, 0 + sub sp, r10 + + /* Call main and call exit when it returns */ + call main + call exit + + .weak _data_lma diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am --- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.am 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.am 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,18 @@ +## Process this file with automake to generate Makefile.in + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +AM_CCASFLAGS = $(INCLUDES) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = syscalls.c setjmp.S +lib_a_CCASFLAGS = $(AM_CCASFLAGS) +lib_a_CFLAGS = $(AM_CFLAGS) + +all: crt0.o + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in --- newlib-1.17.0/newlib/libc/sys/avr32/Makefile.in 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/Makefile.in 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,329 @@ +# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +AR = @AR@ +AS = @AS@ +CC = @CC@ +CPP = @CPP@ +EXEEXT = @EXEEXT@ +LDFLAGS = @LDFLAGS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +VERSION = @VERSION@ +aext = @aext@ +libm_machine_dir = @libm_machine_dir@ +machine_dir = @machine_dir@ +newlib_basedir = @newlib_basedir@ +oext = @oext@ +sys_dir = @sys_dir@ + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = syscalls.c setjmp.S + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +LIBRARIES = $(noinst_LIBRARIES) + + +DEFS = @DEFS@ -I. -I$(srcdir) +CPPFLAGS = +LIBS = @LIBS@ +lib_a_LIBADD = +lib_a_OBJECTS = syscalls.o setjmp.o +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +SOURCES = $(lib_a_SOURCES) +OBJECTS = $(lib_a_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .o .s +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ + ../../../acinclude.m4 ../../../aclocal.m4 \ + ../../../libtool.m4 + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +mostlyclean-noinstLIBRARIES: + +clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) + +distclean-noinstLIBRARIES: + +maintainer-clean-noinstLIBRARIES: + +.c.o: + $(COMPILE) -c $< + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) + -rm -f lib.a + $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) + $(RANLIB) lib.a + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + @for file in $(DISTFILES); do \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: +check: check-am +installcheck-am: +installcheck: installcheck-am +install-info-am: +install-info: install-info-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(LIBRARIES) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ + mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ + mostlyclean-am + +clean: clean-am + +distclean-am: distclean-noinstLIBRARIES distclean-compile \ + distclean-tags distclean-generic clean-am + +distclean: distclean-am + -rm -f config.status + +maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ + maintainer-clean-compile maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + -rm -f config.status + +.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ +clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-info-am install-info \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +all: crt0.o + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S --- newlib-1.17.0/newlib/libc/sys/avr32/setjmp.S 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/setjmp.S 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,20 @@ + .text + .globl setjmp +setjmp: + stm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr + retal 0 + + .globl longjmp +longjmp: + ldm r12, r0, r1, r2, r3, r4, r5, r6, r7, sp, lr + /* Put the return value into the integer result register. + But if it is zero then return 1 instead. */ + cp r11, 0 + reteq 1 + retal r11 + + + + + + diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h --- newlib-1.17.0/newlib/libc/sys/avr32/sys/sysregs.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/sys/sysregs.h 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,158 @@ +#ifndef __ASM_AVR32_SYSREGS_H +#define __ASM_AVR32_SYSREGS_H + +#define SYSREG_SR 0 +#define SYSREG_EVBA 4 +#define SYSREG_ACBA 8 +#define SYSREG_CPUCR 12 +#define SYSREG_ECR 16 +#define SYSREG_RSR_SUP 20 +#define SYSREG_RSR_INT0 24 +#define SYSREG_RSR_INT1 28 +#define SYSREG_RSR_INT2 32 +#define SYSREG_RSR_INT3 36 +#define SYSREG_RSR_EX 40 +#define SYSREG_RSR_NMI 44 +#define SYSREG_RSR_DBG 48 +#define SYSREG_RAR_SUP 52 +#define SYSREG_RAR_INT0 56 +#define SYSREG_RAR_INT1 60 +#define SYSREG_RAR_INT2 64 +#define SYSREG_RAR_INT3 68 +#define SYSREG_RAR_EX 72 +#define SYSREG_RAR_NMI 76 +#define SYSREG_RAR_DBG 80 +#define SYSREG_JECR 84 +#define SYSREG_JOSP 88 +#define SYSREG_JAVA_LV0 92 +#define SYSREG_JAVA_LV1 96 +#define SYSREG_JAVA_LV2 100 +#define SYSREG_JAVA_LV3 104 +#define SYSREG_JAVA_LV4 108 +#define SYSREG_JAVA_LV5 112 +#define SYSREG_JAVA_LV6 116 +#define SYSREG_JAVA_LV7 120 +#define SYSREG_JTBA 124 +#define SYSREG_JBCR 128 + +#define SYSREG_CONFIG0 256 +#define SYSREG_CONFIG1 260 +#define SYSREG_COUNT 264 +#define SYSREG_COMPARE 268 + +#define SYSREG_BEAR 316 + +/* MMU interface registers */ +#define SYSREG_TLBEHI 272 +#define SYSREG_TLBELO 276 +#define SYSREG_PTBR 280 +#define SYSREG_TLBEAR 284 +#define SYSREG_MMUCR 288 +#define SYSREG_TLBARLO 292 +#define SYSREG_TLBDRLO 296 +#define SYSREG_TLBARHI 300 +#define SYSREG_TLBDRHI 304 + +/* Performance counter */ +#define SYSREG_PCCR 320 + + // Status register bits +#define SR_C_OFFSET 0 +#define SR_Z_OFFSET 1 +#define SR_N_OFFSET 2 +#define SR_V_OFFSET 3 +#define SR_Q_OFFSET 4 +#define SR_T_OFFSET 14 +#define SR_R_OFFSET 15 +#define SR_GM_OFFSET 16 +#define SR_I0M_OFFSET 17 +#define SR_I1M_OFFSET 18 +#define SR_I2M_OFFSET 19 +#define SR_I3M_OFFSET 20 +#define SR_EM_OFFSET 21 +#define SR_M0_OFFSET 22 +#define SR_M1_OFFSET 23 +#define SR_M2_OFFSET 24 +#define SR_D_OFFSET 26 +#define SR_DM_OFFSET 27 +#define SR_J_OFFSET 28 + +#define SR_C (1 << 0) +#define SR_Z (1 << 1) +#define SR_N (1 << 2) +#define SR_V (1 << 3) +#define SR_Q (1 << 4) +#define SR_T (1 << 14) +#define SR_R (1 << 15) +#define SR_GM (1 << 16) +#define SR_I0M (1 << 17) +#define SR_I1M (1 << 18) +#define SR_I2M (1 << 19) +#define SR_I3M (1 << 20) +#define SR_EM (1 << 21) +#define SR_M0 (1 << 22) +#define SR_M1 (1 << 23) +#define SR_M2 (1 << 24) +#define SR_D (1 << 26) +#define SR_DM (1 << 27) +#define SR_J (1 << 28) + +//PCCR bits +#define PCCRS (1<<3) +#define PCCRC (1<<2) +#define PCCRR (1<<1) +#define PCCRE (1<<0) +#define PCCNT_PRESCALE 64 + +//TLBEHI bits +#define TLBEHIVPN (1<<10) +#define TLBEHIV (1<<9) +#define TLBEHII (1<<0) + +//TLBELO = bits +#define TLBELOPFN (1<<10) +#define TLBELOC (1<<9) +#define TLBELOG (1<<8) +#define TLBELOB (1<<7) +#define TLBELOAP (1<<5) +#define TLBELOSZ (1<<2) +#define TLBELOD (1<<1) +#define TLBELOW (1<<0) + +//MMUCR bits +#define MMUIRP (1<<26) +#define MMUILA (1<<20) +#define MMUDRP (1<<14) +#define MMUDLA (1<<8) +#define MMUS (1<<4) +#define MMUN (1<<3) +#define MMUI (1<<2) +#define MMUM (1<<1) +#define MMUE (1<<0) + +// Relative offsets to EVBA +#define H_UNREC_EX 0x000 +#define H_TLB_MH 0x004 +#define H_BUS_ERR_D 0x008 +#define H_BUS_ERR_I 0x00C +#define H_NMI 0x010 +#define H_INST_ADDR 0x014 +#define H_ITLB_MISS 0x050 +#define H_ITLB_PROT 0x018 +#define H_DEBUG 0x01C +#define H_ILL_OPC 0x020 +#define H_UNIMPL_INST 0x024 +#define H_PRIV_VIOL 0x028 +#define H_FLOAT_PT 0x02C +#define H_COPROC_ABS 0x030 +#define H_SCALL 0x100 +#define H_DATA_ADDR_R 0x034 +#define H_DATA_ADDR_W 0x038 +#define H_DTLB_MISS_R 0x060 +#define H_DTLB_MISS_W 0x070 +#define H_DTLB_PROT_R 0x03C +#define H_DTLB_PROT_W 0x040 +#define H_DTLB_MOD 0x044 + + +#endif /* __ASM_AVR32_SYSREGS_H */ diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c --- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.c 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.c 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,234 @@ +#include "syscalls.h" +#include "sys/sysregs.h" +#include +#include +#include +#include + +int __attribute__((weak)) + _init_startup () +{ + return 0; +} + + +clock_t __attribute__((weak)) + _times( struct tms *tms ) +{ + int tick; + tick = __builtin_mfsr(SYSREG_COUNT); + tms->tms_utime = 0; + tms->tms_stime = tick; + tms->tms_cutime = 0; + tms->tms_cstime = 0; + return tick; +} + +extern void __heap_start__, __heap_end__; + +void * __attribute__((weak)) + _sbrk(int increment) +{ + static void *cur_heap_pos = 0; + + //Initialize cur_heap_pos + if ( cur_heap_pos == 0 ) + cur_heap_pos = &__heap_start__; + + if ( (cur_heap_pos + increment) <= &__heap_end__ ){ + void *heap_pos = cur_heap_pos; + cur_heap_pos += increment; + return heap_pos; + } else { +#ifdef DEBUG_MSG_ON + fprintf(stderr, "Warning: Heap is running full trying to allocate %i bytes!!!!\n", increment); + fprintf(stderr, "\tHeap start address\t= 0x%x\n", &__heap_start__); + fprintf(stderr, "\tHeap end address\t= 0x%x\n", &__heap_end__); + fprintf(stderr, "\tCurrent heap address\t= 0x%x\n", cur_heap_pos); + fflush(stderr); +#endif + errno = ENOMEM; + return (void *)-1; + } + return (void *)-1; +} + +void __attribute__((weak,naked)) + _init_argv (void *arg_mem_top) +{ + T2H_SYSCALL(T2H_SYSCALL_INIT_ARGV); + T2H_SYSCALL_RETURN(); +} + +void __attribute__((weak,naked)) + _exit( int code ) +{ + T2H_SYSCALL(T2H_SYSCALL_EXIT); + while (1); +} + +int __attribute__((weak,naked)) + _open (char *pathname, int flags, int mode) +{ + T2H_SYSCALL(T2H_SYSCALL_OPEN); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak,naked)) + _close (int file) +{ + T2H_SYSCALL(T2H_SYSCALL_CLOSE); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak,naked)) + _lseek( int filedes, int offset, int whence ) +{ + T2H_SYSCALL(T2H_SYSCALL_LSEEK); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + + +int __attribute__((weak,naked)) + _read (int file, + char * ptr, + int len){ + T2H_SYSCALL(T2H_SYSCALL_READ); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak,naked)) + _write (int file, + char * ptr, + int len){ + T2H_SYSCALL(T2H_SYSCALL_WRITE); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak,naked)) + isatty (int desc){ + T2H_SYSCALL(T2H_SYSCALL_ISATTY); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +static void _convert_host2target_stat(struct stat *target_stat, struct host_stat *host_stat) +{ + target_stat->st_dev = (dev_t)host_stat->st_dev; + target_stat->st_ino = (ino_t)host_stat->st_ino; + target_stat->st_mode = (mode_t)host_stat->st_mode; + target_stat->st_nlink = (nlink_t)host_stat->st_nlink; + target_stat->st_uid = (uid_t)host_stat->st_uid; + target_stat->st_gid = (gid_t)host_stat->st_gid; + target_stat->st_rdev = (dev_t)host_stat->st_rdev; + target_stat->st_size = (off_t)host_stat->st_size; + target_stat->st_blksize = (long)host_stat->st_blksize; + target_stat->st_blocks = (long)host_stat->st_blocks; + target_stat->st_atime = (time_t)host_stat->st_atime; + target_stat->st_mtime = (time_t)host_stat->st_mtime; + target_stat->st_ctime = (time_t)host_stat->st_ctime; +} + +int __attribute__((naked)) + _fstat_host (int filedes, struct host_stat *ptr){ + T2H_SYSCALL(T2H_SYSCALL_FSTAT); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((naked)) + _stat_host (const char *filename, struct host_stat *ptr){ + T2H_SYSCALL(T2H_SYSCALL_STAT); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak)) + _fstat (int filedes, struct stat *stat){ + struct host_stat host_stat; + if ( _fstat_host (filedes, &host_stat) < 0 ) + return -1; + _convert_host2target_stat (stat, &host_stat); + return 0; +} + +int __attribute__((weak)) + _stat (const char *filename, struct stat *stat){ + struct host_stat host_stat; + if ( _stat_host (filename, &host_stat) < 0) + return -1; + _convert_host2target_stat (stat, &host_stat); + return 0; +} + + +int __attribute__((naked)) + _gettimeofday_host (struct host_timeval *tv, struct timezone *tz){ + T2H_SYSCALL(T2H_SYSCALL_GETTIMEOFDAY); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak)) + _gettimeofday (struct timeval *tv, struct timezone *tz){ + struct host_timeval host_tv; + if ( _gettimeofday_host (&host_tv, tz) < 0 ) + return -1; + tv->tv_sec = (long)host_tv.tv_sec; + tv->tv_usec = (long)host_tv.tv_usec; + return 0; +} + +int __attribute__((weak,naked)) + _unlink (const char *path){ + T2H_SYSCALL(T2H_SYSCALL_UNLINK); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak,naked)) + _system (const char *command){ + T2H_SYSCALL(T2H_SYSCALL_SYSTEM); + T2H_SYSCALL_CHECK_ERROR_AND_RETURN(); +} + +int __attribute__((weak)) + _execve (){ + return -1; +} + + +int __attribute__((weak)) + _fork (){ + return -1; +} + +int __attribute__((weak)) + _wait (){ + return -1; +} + +int __attribute__((weak)) + sigfillset (){ + return -1; +} + +int __attribute__((weak)) + sigprocmask (){ + return -1; +} + +int __attribute__((weak)) + _fcntl (){ + return -1; +} + +int __attribute__((weak)) + _link (){ + return -1; +} + +int __attribute__((weak)) + _kill (){ + return -1; +} + +int __attribute__((weak)) + _getpid (){ + return -1; +} diff -Naur newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h --- newlib-1.17.0/newlib/libc/sys/avr32/syscalls.h 1970-01-01 01:00:00.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/avr32/syscalls.h 2009-05-22 09:57:50.000000000 +0200 @@ -0,0 +1,72 @@ +#ifndef __SYSCALLS_H__ +#define __SYSCALLS_H__ + +#include +#include + +struct host_stat { + unsigned int st_dev; /* device */ + unsigned int st_ino; /* inode */ + mode_t st_mode; /* protection */ + unsigned int st_nlink; /* number of hard links */ + unsigned int st_uid; /* user ID of owner */ + unsigned int st_gid; /* group ID of owner */ + unsigned int st_rdev; /* device type (if inode device) */ + unsigned long long st_size; /* total size, in bytes */ + unsigned long long st_blksize; /* blocksize for filesystem I/O */ + unsigned long long st_blocks; /* number of blocks allocated */ + time_t st_atime; /* time of last access */ + time_t st_mtime; /* time of last modification */ + time_t st_ctime; /* time of last change */ +}; + +struct host_timeval { + time_t tv_sec; + long long tv_usec; +}; + + +#define T2H_SYSCALL_OPEN 1 +#define T2H_SYSCALL_CLOSE 2 +#define T2H_SYSCALL_READ 3 +#define T2H_SYSCALL_WRITE 4 +#define T2H_SYSCALL_LSEEK 5 +#define T2H_SYSCALL_RENAME 6 +#define T2H_SYSCALL_UNLINK 7 +#define T2H_SYSCALL_STAT 8 +#define T2H_SYSCALL_FSTAT 9 +#define T2H_SYSCALL_GETTIMEOFDAY 10 +#define T2H_SYSCALL_ISATTY 11 +#define T2H_SYSCALL_SYSTEM 12 +#define T2H_SYSCALL_EXIT 13 +#define T2H_SYSCALL_INIT_ARGV 14 + + +/* The breakpoint/mov r12,-1/mov r11,... pattern causes + the debugger to be able to recognize the system call. + If the debug system is not enabled then the breakpoint + is executed as a nop and r12 set to -1 and errno to + ENOSYS. The debugger is responsible for setting r12 + and r11 and skipping the instructions after the breakpoint + which would otherwise set these registers. +*/ +#define T2H_SYSCALL(syscall_code) \ + asm ("mov r8, %0\n" \ + "breakpoint\n" \ + "mov r12, -1\n" \ + "mov r11, %1\n" \ + :: "i" (syscall_code), "i" (ENOSYS) ); + +#define T2H_SYSCALL_CHECK_ERROR_AND_RETURN() \ + asm ("cp.w r12, 0\n" \ + "retge r12\n" \ + "lda.w r10, errno\n" \ + "st.w r10[0], r11\n" \ + "ret r12\n" \ + ".align 2\n" \ + ".cpool\n"); + +#define T2H_SYSCALL_RETURN() \ + asm ("ret r12\n"); + +#endif diff -Naur newlib-1.17.0/newlib/libc/sys/configure newlib-1.17.0-new/newlib/libc/sys/configure --- newlib-1.17.0/newlib/libc/sys/configure 2008-12-22 20:45:49.000000000 +0100 +++ newlib-1.17.0-new/newlib/libc/sys/configure 2009-05-22 09:57:50.000000000 +0200 @@ -1,25 +1,54 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for newlib 1.17.0. +# Generated by GNU Autoconf 2.61 for newlib 1.17.0. # -# Copyright (C) 2003 Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## -# Be Bourne compatible +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh fi -DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then @@ -29,8 +58,43 @@ fi +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + # Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done PS1='$ ' PS2='> ' PS4='+ ' @@ -44,18 +108,19 @@ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else - $as_unset $as_var + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false @@ -63,157 +128,388 @@ # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# CDPATH. +$as_unset CDPATH -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no fi + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in + case $as_dir in /*) - if ("$as_dir/$as_base" -c ' + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( as_lineno_1=$LINENO as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || + chmod +x "$as_me.lineno" || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: @@ -222,7 +518,28 @@ as_mkdir_p=false fi -as_executable_p="test -f" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -231,15 +548,6 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - # Check that we are running under the correct shell. @@ -390,29 +698,26 @@ +exec 7<&0 &1 + # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -exec 6>&1 - # # Initializations. # ac_default_prefix=/usr/local +ac_clean_files= ac_config_libobj_dir=. +LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - # Identity of this package. PACKAGE_NAME='newlib' PACKAGE_TARNAME='newlib' @@ -424,66 +729,214 @@ # Factoring default headers for most tests. ac_includes_default="\ #include -#if HAVE_SYS_TYPES_H +#ifdef HAVE_SYS_TYPES_H # include #endif -#if HAVE_SYS_STAT_H +#ifdef HAVE_SYS_STAT_H # include #endif -#if STDC_HEADERS +#ifdef STDC_HEADERS # include # include #else -# if HAVE_STDLIB_H +# ifdef HAVE_STDLIB_H # include # endif #endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif -#if HAVE_STRINGS_H +#ifdef HAVE_STRINGS_H # include #endif -#if HAVE_INTTYPES_H +#ifdef HAVE_INTTYPES_H # include -#else -# if HAVE_STDINT_H -# include -# endif #endif -#if HAVE_UNISTD_H +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H # include #endif" -ac_subdirs_all="$ac_subdirs_all a29khif" -ac_subdirs_all="$ac_subdirs_all arc" -ac_subdirs_all="$ac_subdirs_all arm" -ac_subdirs_all="$ac_subdirs_all d10v" -ac_subdirs_all="$ac_subdirs_all decstation" -ac_subdirs_all="$ac_subdirs_all h8300hms" -ac_subdirs_all="$ac_subdirs_all h8500hms" -ac_subdirs_all="$ac_subdirs_all linux" -ac_subdirs_all="$ac_subdirs_all m88kbug" -ac_subdirs_all="$ac_subdirs_all mmixware" -ac_subdirs_all="$ac_subdirs_all netware" -ac_subdirs_all="$ac_subdirs_all rdos" -ac_subdirs_all="$ac_subdirs_all rtems" -ac_subdirs_all="$ac_subdirs_all sh" -ac_subdirs_all="$ac_subdirs_all sparc64" -ac_subdirs_all="$ac_subdirs_all sun4" -ac_subdirs_all="$ac_subdirs_all sysmec" -ac_subdirs_all="$ac_subdirs_all sysnec810" -ac_subdirs_all="$ac_subdirs_all sysnecv850" -ac_subdirs_all="$ac_subdirs_all sysvi386" -ac_subdirs_all="$ac_subdirs_all sysvnecv70" -ac_subdirs_all="$ac_subdirs_all tic80" -ac_subdirs_all="$ac_subdirs_all w65" -ac_subdirs_all="$ac_subdirs_all z8ksim" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAY_SUPPLY_SYSCALLS_TRUE MAY_SUPPLY_SYSCALLS_FALSE newlib_basedir build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB READELF ac_ct_READELF MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CCAS CCASFLAGS NEWLIB_CFLAGS LDFLAGS ELIX_LEVEL_0_TRUE ELIX_LEVEL_0_FALSE ELIX_LEVEL_1_TRUE ELIX_LEVEL_1_FALSE ELIX_LEVEL_2_TRUE ELIX_LEVEL_2_FALSE ELIX_LEVEL_3_TRUE ELIX_LEVEL_3_FALSE ELIX_LEVEL_4_TRUE ELIX_LEVEL_4_FALSE USE_LIBTOOL_TRUE USE_LIBTOOL_FALSE OBJEXT oext aext lpfx libm_machine_dir machine_dir sys_dir SED DLLTOOL ac_ct_DLLTOOL OBJDUMP ac_ct_OBJDUMP LIBTOOL CFLAGS CPPFLAGS ac_ct_CC EXEEXT EGREP FGREP GREP LD DUMPBIN ac_ct_DUMPBIN NM LN_S lt_ECHO DSYMUTIL ac_ct_DSYMUTIL NMEDIT ac_ct_NMEDIT LIPO ac_ct_LIPO OTOOL ac_ct_OTOOL OTOOL64 ac_ct_OTOOL64 CPP subdirs CRT0 HAVE_SYS_DIR_TRUE HAVE_SYS_DIR_FALSE LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +MAY_SUPPLY_SYSCALLS_TRUE +MAY_SUPPLY_SYSCALLS_FALSE +newlib_basedir +build +build_cpu +build_vendor +build_os +host +host_cpu +host_vendor +host_os +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +CYGPATH_W +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +install_sh +STRIP +INSTALL_STRIP_PROGRAM +mkdir_p +AWK +SET_MAKE +am__leading_dot +AMTAR +am__tar +am__untar +CC +DEPDIR +am__include +am__quote +AMDEP_TRUE +AMDEP_FALSE +AMDEPBACKSLASH +CCDEPMODE +am__fastdepCC_TRUE +am__fastdepCC_FALSE +AS +AR +RANLIB +READELF +MAINTAINER_MODE_TRUE +MAINTAINER_MODE_FALSE +MAINT +CCAS +CCASFLAGS +NEWLIB_CFLAGS +LDFLAGS +ELIX_LEVEL_0_TRUE +ELIX_LEVEL_0_FALSE +ELIX_LEVEL_1_TRUE +ELIX_LEVEL_1_FALSE +ELIX_LEVEL_2_TRUE +ELIX_LEVEL_2_FALSE +ELIX_LEVEL_3_TRUE +ELIX_LEVEL_3_FALSE +ELIX_LEVEL_4_TRUE +ELIX_LEVEL_4_FALSE +USE_LIBTOOL_TRUE +USE_LIBTOOL_FALSE +OBJEXT +oext +aext +lpfx +libm_machine_dir +machine_dir +sys_dir +SED +DLLTOOL +OBJDUMP +LIBTOOL +CFLAGS +CPPFLAGS +ac_ct_CC +EXEEXT +GREP +EGREP +FGREP +LD +DUMPBIN +ac_ct_DUMPBIN +NM +LN_S +lt_ECHO +DSYMUTIL +NMEDIT +LIPO +OTOOL +OTOOL64 +CPP +subdirs +CRT0 +HAVE_SYS_DIR_TRUE +HAVE_SYS_DIR_FALSE +LIBOBJS +LTLIBOBJS' ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias +CCAS +CCASFLAGS +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' +ac_subdirs_all='a29khif +arc +arm +avr32 +d10v +decstation +h8300hms +h8500hms +linux +m88kbug +mmixware +netware +rdos +rtems +sh +sparc64 +sun4 +sysmec +sysnec810 +sysnecv850 +sysvi386 +sysvnecv70 +tic80 +w65 +z8ksim' # Initialize some variables set by options. ac_init_help= @@ -510,34 +963,48 @@ # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' +datarootdir='${prefix}/share' +datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' ac_prev= +ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" + eval $ac_prev=\$ac_option ac_prev= continue fi - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac # Accept the important Cygnus configure options, so we can diagnose typos. - case $ac_option in + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; @@ -559,33 +1026,45 @@ --config-cache | -C) cache_file=config.cache ;; - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) + -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -612,6 +1091,12 @@ -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; @@ -636,13 +1121,16 @@ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) + | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) @@ -707,6 +1195,16 @@ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; @@ -759,24 +1257,20 @@ -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=\$ac_optarg ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=no ;; --x) # Obsolete; use --with-x. @@ -807,8 +1301,7 @@ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" + eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) @@ -828,27 +1321,19 @@ { (exit 1); exit 1; }; } fi -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir do - eval ac_val=$`echo $ac_var` + eval ac_val=\$$ac_var case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' @@ -875,82 +1360,76 @@ test "$silent" = yes && exec 6>/dev/null +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then + if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CCAS_set=${CCAS+set} -ac_env_CCAS_value=$CCAS -ac_cv_env_CCAS_set=${CCAS+set} -ac_cv_env_CCAS_value=$CCAS -ac_env_CCASFLAGS_set=${CCASFLAGS+set} -ac_env_CCASFLAGS_value=$CCASFLAGS -ac_cv_env_CCASFLAGS_set=${CCASFLAGS+set} -ac_cv_env_CCASFLAGS_value=$CCASFLAGS -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done # # Report the --help message. @@ -979,9 +1458,6 @@ -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] -_ACEOF - - cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] @@ -999,15 +1475,22 @@ --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/newlib] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -1044,10 +1527,8 @@ --enable-dependency-tracking do not reject slow dependency extractors --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer - --enable-shared[=PKGS] - build shared libraries [default=yes] - --enable-static[=PKGS] - build static libraries [default=yes] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) @@ -1066,128 +1547,95 @@ CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF +ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. - ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue + test -d "$ac_dir" || continue ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done fi -test -n "$ac_init_help" && exit 0 +test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF newlib configure 1.17.0 -generated by GNU Autoconf 2.59 +generated by GNU Autoconf 2.61 -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF - exit 0 + exit fi -exec 5>config.log -cat >&5 <<_ACEOF +cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by newlib $as_me 1.17.0, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.61. Invocation command line was $ $0 $@ _ACEOF +exec 5>>config.log { cat <<_ASUNAME ## --------- ## @@ -1206,7 +1654,7 @@ /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` @@ -1220,6 +1668,7 @@ test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done +IFS=$as_save_IFS } >&5 @@ -1241,7 +1690,6 @@ ac_configure_args= ac_configure_args0= ac_configure_args1= -ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do @@ -1252,7 +1700,7 @@ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in @@ -1274,9 +1722,7 @@ -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " + ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done @@ -1287,8 +1733,8 @@ # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { @@ -1301,20 +1747,34 @@ _ASBOX echo # The following way of writing the cache mishandles newlines in values, -{ +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} + esac | + sort +) echo cat <<\_ASBOX @@ -1325,22 +1785,28 @@ echo for ac_var in $ac_subst_vars do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## +## ------------------- ## +## File substitutions. ## +## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" done | sort echo fi @@ -1352,26 +1818,24 @@ ## ----------- ## _ASBOX echo - sed "/^$/d" confdefs.h | sort + cat confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status - ' 0 +' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h +rm -f -r conftest* confdefs.h # Predefined preprocessor variables. @@ -1402,14 +1866,17 @@ # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" +else + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" fi -for ac_site_file in $CONFIG_SITE; do +shift +for ac_site_file +do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} @@ -1425,8 +1892,8 @@ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; esac fi else @@ -1438,12 +1905,11 @@ # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do +for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 @@ -1468,8 +1934,7 @@ # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in @@ -1486,12 +1951,6 @@ { (exit 1); exit 1; }; } fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - @@ -1516,67 +1975,92 @@ +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= -for ac_dir in ../../.. $srcdir/../../..; do - if test -f $ac_dir/install-sh; then +for ac_dir in ../../.. "$srcdir"/../../..; do + if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break - elif test -f $ac_dir/install.sh; then + elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break - elif test -f $ac_dir/shtool; then + elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in ../../.. $srcdir/../../.." >&2;} + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ../../.. \"$srcdir\"/../../.." >&2;} { (exit 1); exit 1; }; } fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + # Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6; } if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac am__api_version="1.9" @@ -1593,8 +2077,8 @@ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1616,7 +2100,7 @@ # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -1635,21 +2119,22 @@ ;; esac done +IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -1659,8 +2144,8 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file @@ -1702,20 +2187,20 @@ Check your system clock" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } test "$program_prefix" != NONE && - program_transform_name="s,^,$program_prefix,;$program_transform_name" + program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$,$program_suffix,;$program_transform_name" + program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm conftest.sed +rm -f conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` @@ -1767,8 +2252,8 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -1781,54 +2266,57 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 + { echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$AWK" && break done -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF +SHELL = /bin/sh all: - @echo 'ac_maketemp="$(MAKE)"' + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac rm -f conftest.make fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } SET_MAKE= else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -1843,7 +2331,7 @@ DEPDIR="${am__leading_dot}deps" - ac_config_commands="$ac_config_commands depfiles" +ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} @@ -1853,8 +2341,8 @@ .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } am__include="#" am__quote= _am_result=none @@ -1881,15 +2369,15 @@ fi -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 +{ echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6; } rm -f confinc confmf -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +# Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" + enableval=$enable_dependency_tracking; +fi -fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' @@ -1907,10 +2395,9 @@ -# Check whether --enable-multilib or --disable-multilib was given. +# Check whether --enable-multilib was given. if test "${enable_multilib+set}" = set; then - enableval="$enable_multilib" - case "${enableval}" in + enableval=$enable_multilib; case "${enableval}" in yes) multilib=yes ;; no) multilib=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 @@ -1919,11 +2406,11 @@ esac else multilib=yes -fi; -# Check whether --enable-target-optspace or --disable-target-optspace was given. +fi + +# Check whether --enable-target-optspace was given. if test "${enable_target_optspace+set}" = set; then - enableval="$enable_target_optspace" - case "${enableval}" in + enableval=$enable_target_optspace; case "${enableval}" in yes) target_optspace=yes ;; no) target_optspace=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 @@ -1932,11 +2419,11 @@ esac else target_optspace= -fi; -# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. +fi + +# Check whether --enable-malloc-debugging was given. if test "${enable_malloc_debugging+set}" = set; then - enableval="$enable_malloc_debugging" - case "${enableval}" in + enableval=$enable_malloc_debugging; case "${enableval}" in yes) malloc_debugging=yes ;; no) malloc_debugging=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 @@ -1945,11 +2432,11 @@ esac else malloc_debugging= -fi; -# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. +fi + +# Check whether --enable-newlib-multithread was given. if test "${enable_newlib_multithread+set}" = set; then - enableval="$enable_newlib_multithread" - case "${enableval}" in + enableval=$enable_newlib_multithread; case "${enableval}" in yes) newlib_multithread=yes ;; no) newlib_multithread=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 @@ -1958,11 +2445,11 @@ esac else newlib_multithread=yes -fi; -# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given. +fi + +# Check whether --enable-newlib-iconv was given. if test "${enable_newlib_iconv+set}" = set; then - enableval="$enable_newlib_iconv" - if test "${newlib_iconv+set}" != set; then + enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then case "${enableval}" in yes) newlib_iconv=yes ;; no) newlib_iconv=no ;; @@ -1973,11 +2460,11 @@ fi else newlib_iconv=${newlib_iconv} -fi; -# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. +fi + +# Check whether --enable-newlib-elix-level was given. if test "${enable_newlib_elix_level+set}" = set; then - enableval="$enable_newlib_elix_level" - case "${enableval}" in + enableval=$enable_newlib_elix_level; case "${enableval}" in 0) newlib_elix_level=0 ;; 1) newlib_elix_level=1 ;; 2) newlib_elix_level=2 ;; @@ -1989,11 +2476,11 @@ esac else newlib_elix_level=0 -fi; -# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. +fi + +# Check whether --enable-newlib-io-float was given. if test "${enable_newlib_io_float+set}" = set; then - enableval="$enable_newlib_io_float" - case "${enableval}" in + enableval=$enable_newlib_io_float; case "${enableval}" in yes) newlib_io_float=yes ;; no) newlib_io_float=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 @@ -2002,11 +2489,11 @@ esac else newlib_io_float=yes -fi; -# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. +fi + +# Check whether --enable-newlib-supplied-syscalls was given. if test "${enable_newlib_supplied_syscalls+set}" = set; then - enableval="$enable_newlib_supplied_syscalls" - case "${enableval}" in + enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in yes) newlib_may_supply_syscalls=yes ;; no) newlib_may_supply_syscalls=no ;; *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 @@ -2015,7 +2502,8 @@ esac else newlib_may_supply_syscalls=yes -fi; +fi + if test x${newlib_may_supply_syscalls} = xyes; then @@ -2041,26 +2529,41 @@ fi -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6; } if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} { (exit 1); exit 1; }; } +fi fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac @@ -2113,8 +2616,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2127,32 +2630,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2165,27 +2670,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - STRIP=$ac_ct_STRIP + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi else STRIP="$ac_cv_prog_STRIP" fi @@ -2220,8 +2739,8 @@ # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2234,30 +2753,32 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + depcc="$CC" am_compiler_list= -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2346,8 +2867,8 @@ fi fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type @@ -2366,8 +2887,8 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2381,7 +2902,7 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue @@ -2392,6 +2913,7 @@ fi done done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -2409,20 +2931,21 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 -echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 +echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2442,8 +2965,8 @@ ac_cv_c_compiler_gnu=no fi fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } if test $ac_cv_c_compiler_gnu = yes; then GCC=yes @@ -2452,13 +2975,16 @@ CFLAGS= ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -2474,38 +3000,118 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -2537,8 +3143,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2551,32 +3157,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AS="${ac_tool_prefix}as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AS=$ac_cv_prog_AS if test -n "$AS"; then - echo "$as_me:$LINENO: result: $AS" >&5 -echo "${ECHO_T}$AS" >&6 + { echo "$as_me:$LINENO: result: $AS" >&5 +echo "${ECHO_T}$AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AS"; then ac_ct_AS=$AS # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2589,26 +3197,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AS="as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_AS=$ac_cv_prog_ac_ct_AS if test -n "$ac_ct_AS"; then - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -echo "${ECHO_T}$ac_ct_AS" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +echo "${ECHO_T}$ac_ct_AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AS=$ac_ct_AS + if test "x$ac_ct_AS" = x; then + AS="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi else AS="$ac_cv_prog_AS" fi @@ -2616,8 +3239,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2630,32 +3253,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 + { echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2668,26 +3293,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AR=$ac_ct_AR + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi else AR="$ac_cv_prog_AR" fi @@ -2695,8 +3335,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2709,32 +3349,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 + { echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2747,27 +3389,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - RANLIB=$ac_ct_RANLIB + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi else RANLIB="$ac_cv_prog_RANLIB" fi @@ -2775,8 +3431,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. set dummy ${ac_tool_prefix}readelf; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_READELF+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2789,32 +3445,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_READELF="${ac_tool_prefix}readelf" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi READELF=$ac_cv_prog_READELF if test -n "$READELF"; then - echo "$as_me:$LINENO: result: $READELF" >&5 -echo "${ECHO_T}$READELF" >&6 + { echo "$as_me:$LINENO: result: $READELF" >&5 +echo "${ECHO_T}$READELF" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_READELF"; then ac_ct_READELF=$READELF # Extract the first word of "readelf", so it can be a program name with args. set dummy readelf; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -2827,27 +3485,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_READELF="readelf" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_READELF" && ac_cv_prog_ac_ct_READELF=":" fi fi ac_ct_READELF=$ac_cv_prog_ac_ct_READELF if test -n "$ac_ct_READELF"; then - echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 -echo "${ECHO_T}$ac_ct_READELF" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 +echo "${ECHO_T}$ac_ct_READELF" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - READELF=$ac_ct_READELF + if test "x$ac_ct_READELF" = x; then + READELF=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + READELF=$ac_ct_READELF + fi else READELF="$ac_cv_prog_READELF" fi @@ -2866,8 +3538,8 @@ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -2889,7 +3561,7 @@ # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -2908,21 +3580,22 @@ ;; esac done +IFS=$as_save_IFS fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is - # removed, or if the path is relative. + # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -2936,17 +3609,17 @@ # Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */ ac_given_INSTALL=$INSTALL -echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 - # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } + # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then - enableval="$enable_maintainer_mode" - USE_MAINTAINER_MODE=$enableval + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no -fi; - echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 +fi + + { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then @@ -3066,64 +3739,89 @@ -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 -if test "${lt_cv_path_SED+set}" = set; then +{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } +if test "${ac_cv_path_SED+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" | sed 99q >conftest.sed + $as_unset ac_script || ac_script= + # Extract the first word of "sed gsed" to use in msg output +if test -z "$SED"; then +set dummy sed gsed; ac_prog_name=$2 +if test "${ac_cv_path_SED+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. + ac_path_SED_found=false +# Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue + # Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_SED_found && break 3 done done +done +IFS=$as_save_IFS + + +fi + +SED="$ac_cv_path_SED" +if test -z "$SED"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } fi -SED=$lt_cv_path_SED +else + ac_cv_path_SED=$SED +fi -echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6 +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 +echo "${ECHO_T}$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" @@ -3146,8 +3844,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3160,32 +3858,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AS="${ac_tool_prefix}as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AS=$ac_cv_prog_AS if test -n "$AS"; then - echo "$as_me:$LINENO: result: $AS" >&5 -echo "${ECHO_T}$AS" >&6 + { echo "$as_me:$LINENO: result: $AS" >&5 +echo "${ECHO_T}$AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AS"; then ac_ct_AS=$AS # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AS+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3198,27 +3898,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AS="as" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false" fi fi ac_ct_AS=$ac_cv_prog_ac_ct_AS if test -n "$ac_ct_AS"; then - echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -echo "${ECHO_T}$ac_ct_AS" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 +echo "${ECHO_T}$ac_ct_AS" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AS=$ac_ct_AS + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi else AS="$ac_cv_prog_AS" fi @@ -3226,8 +3940,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DLLTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3240,32 +3954,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then - echo "$as_me:$LINENO: result: $DLLTOOL" >&5 -echo "${ECHO_T}$DLLTOOL" >&6 + { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 +echo "${ECHO_T}$DLLTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3278,27 +3994,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false" fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then - echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 -echo "${ECHO_T}$ac_ct_DLLTOOL" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 +echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - DLLTOOL=$ac_ct_DLLTOOL + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi @@ -3306,8 +4036,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3320,32 +4050,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -echo "${ECHO_T}$OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +echo "${ECHO_T}$OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3358,27 +4090,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OBJDUMP=$ac_ct_OBJDUMP + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi @@ -3439,8 +4185,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3453,32 +4199,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3491,36 +4239,51 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3533,98 +4296,59 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + + fi fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC +if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else + ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -3642,22 +4366,23 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3670,36 +4395,38 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3712,29 +4439,45 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$ac_ct_CC" && break done - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi fi @@ -3747,21 +4490,35 @@ { (exit 1); exit 1; }; } # Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 +echo "$as_me:$LINENO: checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } @@ -3786,47 +4543,77 @@ # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 +# +# List of possible output files, starting from the most likely. +# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) +# only as a last resort. b.out is created by i960 compilers. +ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' +# +# The IRIX 6 linker writes into existing files which may not be +# executable, retaining their permissions. Remove them first so a +# subsequent execution test works. +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link_default") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. break;; * ) break;; esac done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else + ac_file='' +fi + +{ echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6; } +if test -z "$ac_file"; then echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 @@ -3838,19 +4625,21 @@ fi ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -3869,22 +4658,27 @@ fi fi fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either +# Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } +{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6; } + +{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then @@ -3895,9 +4689,8 @@ for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext break;; * ) break;; esac @@ -3911,14 +4704,14 @@ fi rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3938,14 +4731,20 @@ } _ACEOF rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac @@ -3963,12 +4762,12 @@ rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -3991,50 +4790,49 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_compiler_gnu=no + ac_compiler_gnu=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.$ac_ext <<_ACEOF + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -4050,38 +4848,118 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -4097,12 +4975,12 @@ CFLAGS= fi fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then +{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_cv_prog_cc_stdc=no + ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -4136,12 +5014,17 @@ /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get + as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ + that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; @@ -4156,205 +5039,57 @@ return 0; } _ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break done -rm -f conftest.$ac_ext conftest.$ac_objext +rm -f conftest.$ac_ext CC=$ac_save_CC fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6; } ;; + xno) + { echo "$as_me:$LINENO: result: unsupported" >&5 +echo "${ECHO_T}unsupported" >&6; } ;; *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; + CC="$CC $ac_cv_prog_cc_c89" + { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; esac -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -4363,8 +5098,8 @@ depcc="$CC" am_compiler_list= -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4446,58 +5181,273 @@ fi done - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + + +if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Extract the first word of "grep ggrep" to use in msg output +if test -z "$GREP"; then +set dummy grep ggrep; ac_prog_name=$2 +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_GREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue + # Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_GREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +GREP="$ac_cv_path_GREP" +if test -z "$GREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_GREP=$GREP +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +echo "${ECHO_T}$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + # Extract the first word of "egrep" to use in msg output +if test -z "$EGREP"; then +set dummy egrep; ac_prog_name=$2 +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_EGREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue + # Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_EGREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + fi +EGREP="$ac_cv_path_EGREP" +if test -z "$EGREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type +else + ac_cv_path_EGREP=$EGREP +fi -if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= + fi fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then +{ echo "$as_me:$LINENO: checking for fgrep" >&5 +echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } +if test "${ac_cv_path_FGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + # Extract the first word of "fgrep" to use in msg output +if test -z "$FGREP"; then +set dummy fgrep; ac_prog_name=$2 +if test "${ac_cv_path_FGREP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' + ac_path_FGREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue + # Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_FGREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep +FGREP="$ac_cv_path_FGREP" +if test -z "$FGREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi -echo "$as_me:$LINENO: checking for fgrep" >&5 -echo $ECHO_N "checking for fgrep... $ECHO_C" >&6 -if test "${ac_cv_prog_fgrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 else - if echo 'ab*c' | (grep -F 'ab*c') >/dev/null 2>&1 - then ac_cv_prog_fgrep='grep -F' - else ac_cv_prog_fgrep='fgrep' - fi + ac_cv_path_FGREP=$FGREP +fi + + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_prog_fgrep" >&5 -echo "${ECHO_T}$ac_cv_prog_fgrep" >&6 - FGREP=$ac_cv_prog_fgrep +{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 +echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep @@ -4520,18 +5470,18 @@ -# Check whether --with-gnu-ld or --without-gnu-ld was given. +# Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no -fi; +fi + ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw @@ -4560,11 +5510,11 @@ ;; esac elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for GNU ld" >&5 +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } fi if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -4597,17 +5547,17 @@ LD="$lt_cv_path_LD" if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 + { echo "$as_me:$LINENO: result: $LD" >&5 +echo "${ECHO_T}$LD" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4621,8 +5571,8 @@ ;; esac fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld @@ -4633,8 +5583,8 @@ -echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 -echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 +echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } if test "${lt_cv_path_NM+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4682,8 +5632,8 @@ : ${lt_cv_path_NM=no} fi fi -echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -echo "${ECHO_T}$lt_cv_path_NM" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +echo "${ECHO_T}$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else @@ -4693,8 +5643,8 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DUMPBIN+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4707,25 +5657,27 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then - echo "$as_me:$LINENO: result: $DUMPBIN" >&5 -echo "${ECHO_T}$DUMPBIN" >&6 + { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 +echo "${ECHO_T}$DUMPBIN" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$DUMPBIN" && break done fi @@ -4735,8 +5687,8 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4749,30 +5701,45 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then - echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 -echo "${ECHO_T}$ac_ct_DUMPBIN" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 +echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + test -n "$ac_ct_DUMPBIN" && break done -test -n "$ac_ct_DUMPBIN" || ac_ct_DUMPBIN=":" - DUMPBIN=$ac_ct_DUMPBIN + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi fi @@ -4787,43 +5754,43 @@ -echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 -echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 +echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } if test "${lt_cv_nm_interface+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:4797: $ac_compile\"" >&5) + (eval echo "\"\$as_me:5764: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:4800: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:5767: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:4803: output\"" >&5) + (eval echo "\"\$as_me:5770: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 -echo "${ECHO_T}$lt_cv_nm_interface" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 +echo "${ECHO_T}$lt_cv_nm_interface" >&6; } -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 +echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 + { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +echo "${ECHO_T}no, using $LN_S" >&6; } fi # find the maximum length of command line arguments -echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } if test "${lt_cv_sys_max_cmd_len+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -4942,11 +5909,11 @@ fi if test -n $lt_cv_sys_max_cmd_len ; then - echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 + { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } else - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 + { echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len @@ -4959,8 +5926,8 @@ : ${MV="mv -f"} : ${RM="rm -f"} -echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 -echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 +echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" @@ -4969,18 +5936,18 @@ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes -echo "$as_me:$LINENO: result: $xsi_shell" >&5 -echo "${ECHO_T}$xsi_shell" >&6 +{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 +echo "${ECHO_T}$xsi_shell" >&6; } -echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 -echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 +echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes -echo "$as_me:$LINENO: result: $lt_shell_append" >&5 -echo "${ECHO_T}$lt_shell_append" >&6 +{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 +echo "${ECHO_T}$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then @@ -5014,15 +5981,15 @@ -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } if test "${lt_cv_ld_reload_flag+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_ld_reload_flag='-r' fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; @@ -5050,8 +6017,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5064,32 +6031,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then - echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -echo "${ECHO_T}$OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +echo "${ECHO_T}$OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5102,27 +6071,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false" fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then - echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OBJDUMP=$ac_ct_OBJDUMP + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi @@ -5134,8 +6117,8 @@ -echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 -echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } if test "${lt_cv_deplibs_check_method+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5330,8 +6313,8 @@ esac fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown @@ -5350,8 +6333,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5364,32 +6347,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 + { echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5402,27 +6387,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false" fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +echo "${ECHO_T}$ac_ct_AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - AR=$ac_ct_AR + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi else AR="$ac_cv_prog_AR" fi @@ -5443,8 +6442,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5457,32 +6456,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5495,27 +6496,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - STRIP=$ac_ct_STRIP + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi else STRIP="$ac_cv_prog_STRIP" fi @@ -5530,8 +6545,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5544,32 +6559,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 + { echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5582,27 +6599,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - RANLIB=$ac_ct_RANLIB + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi else RANLIB="$ac_cv_prog_RANLIB" fi @@ -5675,8 +6706,8 @@ # Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -5895,11 +6926,11 @@ lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 + { echo "$as_me:$LINENO: result: failed" >&5 +echo "${ECHO_T}failed" >&6; } else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 + { echo "$as_me:$LINENO: result: ok" >&5 +echo "${ECHO_T}ok" >&6; } fi @@ -5924,11 +6955,11 @@ -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +# Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" + enableval=$enable_libtool_lock; +fi -fi; test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good @@ -5955,7 +6986,7 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 5958 "configure"' > conftest.$ac_ext + echo '#line 6989 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -6047,8 +7078,8 @@ # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } if test "${lt_cv_cc_needs_belf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6074,35 +7105,32 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_cv_cc_needs_belf=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -lt_cv_cc_needs_belf=no + lt_cv_cc_needs_belf=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -6111,8 +7139,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" @@ -6151,8 +7179,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6165,32 +7193,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then - echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -echo "${ECHO_T}$DSYMUTIL" >&6 + { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +echo "${ECHO_T}$DSYMUTIL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6203,27 +7233,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_DSYMUTIL" && ac_cv_prog_ac_ct_DSYMUTIL=":" fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then - echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - DSYMUTIL=$ac_ct_DSYMUTIL + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi @@ -6231,8 +7275,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6245,32 +7289,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then - echo "$as_me:$LINENO: result: $NMEDIT" >&5 -echo "${ECHO_T}$NMEDIT" >&6 + { echo "$as_me:$LINENO: result: $NMEDIT" >&5 +echo "${ECHO_T}$NMEDIT" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6283,27 +7329,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_NMEDIT" && ac_cv_prog_ac_ct_NMEDIT=":" fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then - echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -echo "${ECHO_T}$ac_ct_NMEDIT" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - NMEDIT=$ac_ct_NMEDIT + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi else NMEDIT="$ac_cv_prog_NMEDIT" fi @@ -6311,8 +7371,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_LIPO+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6325,32 +7385,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then - echo "$as_me:$LINENO: result: $LIPO" >&5 -echo "${ECHO_T}$LIPO" >&6 + { echo "$as_me:$LINENO: result: $LIPO" >&5 +echo "${ECHO_T}$LIPO" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6363,27 +7425,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_LIPO" && ac_cv_prog_ac_ct_LIPO=":" fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then - echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 -echo "${ECHO_T}$ac_ct_LIPO" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 +echo "${ECHO_T}$ac_ct_LIPO" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - LIPO=$ac_ct_LIPO + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi else LIPO="$ac_cv_prog_LIPO" fi @@ -6391,8 +7467,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6405,32 +7481,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then - echo "$as_me:$LINENO: result: $OTOOL" >&5 -echo "${ECHO_T}$OTOOL" >&6 + { echo "$as_me:$LINENO: result: $OTOOL" >&5 +echo "${ECHO_T}$OTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6443,27 +7521,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OTOOL" && ac_cv_prog_ac_ct_OTOOL=":" fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then - echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 -echo "${ECHO_T}$ac_ct_OTOOL" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 +echo "${ECHO_T}$ac_ct_OTOOL" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OTOOL=$ac_ct_OTOOL + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi else OTOOL="$ac_cv_prog_OTOOL" fi @@ -6471,8 +7563,8 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_OTOOL64+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6485,32 +7577,34 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then - echo "$as_me:$LINENO: result: $OTOOL64" >&5 -echo "${ECHO_T}$OTOOL64" >&6 + { echo "$as_me:$LINENO: result: $OTOOL64" >&5 +echo "${ECHO_T}$OTOOL64" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi + fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6523,27 +7617,41 @@ IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_OTOOL64" && ac_cv_prog_ac_ct_OTOOL64=":" fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then - echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 -echo "${ECHO_T}$ac_ct_OTOOL64" >&6 + { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 +echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi - OTOOL64=$ac_ct_OTOOL64 + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi else OTOOL64="$ac_cv_prog_OTOOL64" fi @@ -6574,8 +7682,8 @@ - echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 -echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } if test "${lt_cv_apple_cc_single_mod+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6601,10 +7709,10 @@ rm -f conftest.* fi fi -echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 -echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6 - echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 -echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } + { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } if test "${lt_cv_ld_exported_symbols_list+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6628,41 +7736,38 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_cv_ld_exported_symbols_list=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -lt_cv_ld_exported_symbols_list=no + lt_cv_ld_exported_symbols_list=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi -echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; @@ -6703,8 +7808,8 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -6738,24 +7843,22 @@ #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : else echo "$as_me: failed program was:" >&5 @@ -6764,9 +7867,10 @@ # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -6776,24 +7880,22 @@ /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else @@ -6804,6 +7906,7 @@ ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done @@ -6821,8 +7924,8 @@ else ac_cv_prog_CPP=$CPP fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 +{ echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do @@ -6845,24 +7948,22 @@ #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : else echo "$as_me: failed program was:" >&5 @@ -6871,9 +7972,10 @@ # Broken: fails on valid input. continue fi + rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ @@ -6883,24 +7985,22 @@ /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else @@ -6911,6 +8011,7 @@ ac_preproc_ok=: break fi + rm -f conftest.err conftest.$ac_ext done @@ -6933,8 +8034,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -6958,35 +8059,31 @@ } _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_header_stdc=no + ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. @@ -7042,6 +8139,7 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include +#include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) @@ -7061,18 +8159,27 @@ for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); + return 2; + return 0; } _ACEOF rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then @@ -7085,12 +8192,14 @@ ( exit $ac_status ) ac_cv_header_stdc=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF @@ -7113,9 +8222,9 @@ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -7129,38 +8238,35 @@ #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" + eval "$as_ac_Header=no" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 @@ -7175,9 +8281,9 @@ for ac_header in dlfcn.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF @@ -7191,38 +8297,35 @@ #include <$ac_header> _ACEOF rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -eval "$as_ac_Header=no" + eval "$as_ac_Header=no" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 @@ -7242,10 +8345,9 @@ - # Check whether --enable-shared or --disable-shared was given. + # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} + enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; @@ -7264,7 +8366,7 @@ esac else enable_shared=yes -fi; +fi @@ -7273,10 +8375,10 @@ - # Check whether --enable-static or --disable-static was given. + + # Check whether --enable-static was given. if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} + enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; @@ -7295,7 +8397,7 @@ esac else enable_static=yes -fi; +fi @@ -7305,13 +8407,14 @@ -# Check whether --with-pic or --without-pic was given. + +# Check whether --with-pic was given. if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" + withval=$with_pic; pic_mode="$withval" else pic_mode=default -fi; +fi + test -z "$pic_mode" && pic_mode=default @@ -7321,10 +8424,9 @@ - # Check whether --enable-fast-install or --disable-fast-install was given. + # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} + enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; @@ -7343,7 +8445,8 @@ esac else enable_fast_install=yes -fi; +fi + @@ -7403,8 +8506,8 @@ setopt NO_GLOB_SUBST fi -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for objdir" >&5 +echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } if test "${lt_cv_objdir+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7418,8 +8521,8 @@ fi rmdir .libs 2>/dev/null fi -echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -echo "${ECHO_T}$lt_cv_objdir" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +echo "${ECHO_T}$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir @@ -7511,8 +8614,8 @@ case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7564,11 +8667,11 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi @@ -7577,8 +8680,8 @@ if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for file" >&5 +echo $ECHO_N "checking for file... $ECHO_C" >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7630,11 +8733,11 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 + { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +echo "${ECHO_T}$MAGIC_CMD" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi @@ -7714,8 +8817,8 @@ if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag=' -fno-builtin' - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -7732,11 +8835,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7735: $lt_compile\"" >&5) + (eval echo "\"\$as_me:8838: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7739: \$? = $ac_status" >&5 + echo "$as_me:8842: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -7749,8 +8852,8 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" @@ -7769,8 +8872,8 @@ lt_prog_compiler_pic= lt_prog_compiler_static= -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' @@ -8041,8 +9144,8 @@ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic" >&6 +{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } @@ -8053,8 +9156,8 @@ # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_pic_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8071,11 +9174,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8074: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9177: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:8078: \$? = $ac_status" >&5 + echo "$as_me:9181: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. @@ -8088,8 +9191,8 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in @@ -8112,8 +9215,8 @@ # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_static_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8140,8 +9243,8 @@ LDFLAGS="$save_LDFLAGS" fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : @@ -8155,8 +9258,8 @@ - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8176,11 +9279,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8179: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9282: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:8183: \$? = $ac_status" >&5 + echo "$as_me:9286: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8202,16 +9305,16 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -8231,11 +9334,11 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8234: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9337: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:8238: \$? = $ac_status" >&5 + echo "$as_me:9341: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8257,8 +9360,8 @@ $RM conftest* fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } @@ -8266,16 +9369,16 @@ hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 + { echo "$as_me:$LINENO: result: $hard_links" >&5 +echo "${ECHO_T}$hard_links" >&6; } if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} @@ -8290,8 +9393,8 @@ - echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } runpath_var= allow_undefined_flag= @@ -8748,27 +9851,23 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { @@ -8786,8 +9885,10 @@ echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi @@ -8817,27 +9918,23 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then lt_aix_libpath_sed=' /Import File Strings/,/^$/ { @@ -8855,8 +9952,10 @@ echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi @@ -9073,35 +10172,33 @@ int foo(void) {} _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" else @@ -9358,8 +10455,8 @@ fi fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 +{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +echo "${ECHO_T}$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld @@ -9395,46 +10492,52 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } +if test "${lt_cv_archive_cmds_need_lc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -echo "${ECHO_T}$archive_cmds_need_lc" >&6 + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 +echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi @@ -9597,8 +10700,8 @@ - echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } if test "$GCC" = yes; then case $host_os in @@ -10014,12 +11117,17 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no + # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat >conftest.$ac_ext <<_ACEOF + if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext @@ -10035,40 +11143,42 @@ } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then - shlibpath_overrides_runpath=yes + lt_cv_shlibpath_overrides_runpath=yes fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -10278,8 +11388,8 @@ dynamic_linker=no ;; esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 +{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +echo "${ECHO_T}$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" @@ -10380,8 +11490,8 @@ - echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || @@ -10405,8 +11515,8 @@ # directories. hardcode_action=unsupported fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 +{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 +echo "${ECHO_T}$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then @@ -10450,8 +11560,8 @@ darwin*) # if libdl is installed we need to link against it - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10464,56 +11574,53 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else @@ -10527,8 +11634,8 @@ ;; *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for shl_load" >&5 +echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } if test "${ac_cv_func_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10555,73 +11662,64 @@ #undef shl_load -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shl_load (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) +#if defined __stub_shl_load || defined __stub___shl_load choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != shl_load; +return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_shl_load=no + ac_cv_func_shl_load=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } if test $ac_cv_func_shl_load = yes; then lt_cv_dlopen="shl_load" else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10634,61 +11732,58 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shl_load (); int main () { -shl_load (); +return shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dld_shl_load=no + ac_cv_lib_dld_shl_load=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } if test $ac_cv_lib_dld_shl_load = yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen" >&5 +echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } if test "${ac_cv_func_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10715,73 +11810,64 @@ #undef dlopen -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" -{ #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) +#if defined __stub_dlopen || defined __stub___dlopen choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} #endif int main () { -return f != dlopen; +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_func_dlopen=no + ac_cv_func_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } if test $ac_cv_func_dlopen = yes; then lt_cv_dlopen="dlopen" else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10794,61 +11880,58 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10861,61 +11944,58 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_svld_dlopen=no + ac_cv_lib_svld_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } if test $ac_cv_lib_svld_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -10928,56 +12008,53 @@ cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dld_link (); int main () { -dld_link (); +return dld_link (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_dld_dld_link=no + ac_cv_lib_dld_dld_link=no fi -rm -f conftest.err conftest.$ac_objext \ + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } if test $ac_cv_lib_dld_dld_link = yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi @@ -11017,8 +12094,8 @@ save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11028,7 +12105,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11031 "configure" +#line 12108 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11108,13 +12185,13 @@ fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } if test "${lt_cv_dlopen_self_static+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else @@ -11124,7 +12201,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line 11127 "configure" +#line 12204 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11204,8 +12281,8 @@ fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" @@ -11243,13 +12320,13 @@ striplib= old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in @@ -11257,16 +12334,16 @@ if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } fi ;; *) - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } ;; esac fi @@ -11283,13 +12360,13 @@ # Report which library types will actually be built - echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 + { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } + { echo "$as_me:$LINENO: result: $can_build_shared" >&5 +echo "${ECHO_T}$can_build_shared" >&6; } - echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and @@ -11309,15 +12386,15 @@ fi ;; esac - echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 + { echo "$as_me:$LINENO: result: $enable_shared" >&5 +echo "${ECHO_T}$enable_shared" >&6; } - echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 + { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes - echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 + { echo "$as_me:$LINENO: result: $enable_static" >&5 +echo "${ECHO_T}$enable_static" >&6; } @@ -11343,7 +12420,7 @@ - ac_config_commands="$ac_config_commands libtool" + ac_config_commands="$ac_config_commands libtool" @@ -11355,101 +12432,55 @@ if test -n "${sys_dir}"; then case ${sys_dir} in - a29khif) - -subdirs="$subdirs a29khif" + a29khif) subdirs="$subdirs a29khif" ;; - arc) - -subdirs="$subdirs arc" + arc) subdirs="$subdirs arc" ;; - arm) - -subdirs="$subdirs arm" + arm) subdirs="$subdirs arm" ;; - d10v) - -subdirs="$subdirs d10v" + avr32) subdirs="$subdirs avr32" ;; - decstation) - -subdirs="$subdirs decstation" + d10v) subdirs="$subdirs d10v" ;; - h8300hms) - -subdirs="$subdirs h8300hms" + decstation) subdirs="$subdirs decstation" ;; - h8500hms) - -subdirs="$subdirs h8500hms" + h8300hms) subdirs="$subdirs h8300hms" ;; - linux) - -subdirs="$subdirs linux" + h8500hms) subdirs="$subdirs h8500hms" ;; - m88kbug) - -subdirs="$subdirs m88kbug" + linux) subdirs="$subdirs linux" ;; - mmixware) - -subdirs="$subdirs mmixware" + m88kbug) subdirs="$subdirs m88kbug" ;; - netware) - -subdirs="$subdirs netware" + mmixware) subdirs="$subdirs mmixware" ;; - rdos) - -subdirs="$subdirs rdos" + netware) subdirs="$subdirs netware" ;; - rtems) - -subdirs="$subdirs rtems" + rdos) subdirs="$subdirs rdos" ;; - sh) - -subdirs="$subdirs sh" + rtems) subdirs="$subdirs rtems" ;; - sparc64) - -subdirs="$subdirs sparc64" + sh) subdirs="$subdirs sh" ;; - sun4) - -subdirs="$subdirs sun4" + sparc64) subdirs="$subdirs sparc64" ;; - sysmec) - -subdirs="$subdirs sysmec" + sun4) subdirs="$subdirs sun4" ;; - sysnec810) - -subdirs="$subdirs sysnec810" + sysmec) subdirs="$subdirs sysmec" ;; - sysnecv850) - -subdirs="$subdirs sysnecv850" + sysnec810) subdirs="$subdirs sysnec810" ;; - sysvi386) - -subdirs="$subdirs sysvi386" + sysnecv850) subdirs="$subdirs sysnecv850" ;; - sysvnecv70) - -subdirs="$subdirs sysvnecv70" + sysvi386) subdirs="$subdirs sysvi386" ;; - tic80) - -subdirs="$subdirs tic80" + sysvnecv70) subdirs="$subdirs sysvnecv70" ;; - w65) - -subdirs="$subdirs w65" + tic80) subdirs="$subdirs tic80" ;; - z8ksim) - -subdirs="$subdirs z8ksim" + w65) subdirs="$subdirs w65" + ;; + z8ksim) subdirs="$subdirs z8ksim" ;; esac; fi @@ -11471,7 +12502,7 @@ fi - ac_config_files="$ac_config_files Makefile" +ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -11491,39 +12522,58 @@ # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. +# So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -{ +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; + ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} | + esac | + sort +) | sed ' + /^ac_cv_env_/b end t clear - : clear + :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else - echo "not updating unwritable cache $cache_file" + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -11532,63 +12582,48 @@ # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, +# take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF +ac_script=' t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -11703,17 +12738,45 @@ ## M4sh Initialization. ## ## --------------------- ## -# Be Bourne compatible +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh fi -DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then @@ -11723,8 +12786,43 @@ fi +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + # Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done PS1='$ ' PS2='> ' PS4='+ ' @@ -11738,18 +12836,19 @@ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else - $as_unset $as_var + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var fi done # Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false @@ -11757,159 +12856,120 @@ # Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(/\)' \| . 2>/dev/null || echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: @@ -11918,7 +12978,28 @@ as_mkdir_p=false fi -as_executable_p="test -f" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -11927,31 +13008,14 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - exec 6>&1 -# Open the log real soon, to keep \$[0] and so on meaningful, and to +# Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - +# values after options handling. +ac_log=" This file was extended by newlib $as_me 1.17.0, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.61. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -11959,30 +13023,19 @@ CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + _ACEOF +cat >>$CONFIG_STATUS <<_ACEOF # Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi +config_files="$ac_config_files" +config_commands="$ac_config_commands" -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi +_ACEOF cat >>$CONFIG_STATUS <<\_ACEOF - ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. @@ -11990,7 +13043,7 @@ Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit - -V, --version print version number, then exit + -V, --version print version number and configuration settings, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions @@ -12004,19 +13057,21 @@ $config_commands Report bugs to ." -_ACEOF +_ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ newlib config.status 1.17.0 -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" +configured by $0, generated by GNU Autoconf 2.61, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2006 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -12027,60 +13082,42 @@ do case $1 in --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; - -*) + *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; esac case $ac_option in # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; - *) ac_config_targets="$ac_config_targets $1" ;; + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; esac shift @@ -12096,17 +13133,28 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL + export CONFIG_SHELL + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + echo "$ac_log" +} >&5 +_ACEOF cat >>$CONFIG_STATUS <<_ACEOF # -# INIT-COMMANDS section. +# INIT-COMMANDS # - AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" @@ -12367,22 +13415,23 @@ _ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF + +# Handling of arguments. for ac_config_target in $ac_config_targets do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + case $ac_config_target in + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done + # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely @@ -12393,397 +13442,493 @@ fi # Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, +# simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. $debug || { - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } - # Create a (secure) tmp directory for tmp files. { - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - # -# CONFIG_FILES section. +# Set up the sed scripts for CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@MAY_SUPPLY_SYSCALLS_TRUE@,$MAY_SUPPLY_SYSCALLS_TRUE,;t t -s,@MAY_SUPPLY_SYSCALLS_FALSE@,$MAY_SUPPLY_SYSCALLS_FALSE,;t t -s,@newlib_basedir@,$newlib_basedir,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CYGPATH_W@,$CYGPATH_W,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@mkdir_p@,$mkdir_p,;t t -s,@AWK@,$AWK,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@am__leading_dot@,$am__leading_dot,;t t -s,@AMTAR@,$AMTAR,;t t -s,@am__tar@,$am__tar,;t t -s,@am__untar@,$am__untar,;t t -s,@CC@,$CC,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t -s,@AS@,$AS,;t t -s,@ac_ct_AS@,$ac_ct_AS,;t t -s,@AR@,$AR,;t t -s,@ac_ct_AR@,$ac_ct_AR,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@READELF@,$READELF,;t t -s,@ac_ct_READELF@,$ac_ct_READELF,;t t -s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t -s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t -s,@MAINT@,$MAINT,;t t -s,@CCAS@,$CCAS,;t t -s,@CCASFLAGS@,$CCASFLAGS,;t t -s,@NEWLIB_CFLAGS@,$NEWLIB_CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@ELIX_LEVEL_0_TRUE@,$ELIX_LEVEL_0_TRUE,;t t -s,@ELIX_LEVEL_0_FALSE@,$ELIX_LEVEL_0_FALSE,;t t -s,@ELIX_LEVEL_1_TRUE@,$ELIX_LEVEL_1_TRUE,;t t -s,@ELIX_LEVEL_1_FALSE@,$ELIX_LEVEL_1_FALSE,;t t -s,@ELIX_LEVEL_2_TRUE@,$ELIX_LEVEL_2_TRUE,;t t -s,@ELIX_LEVEL_2_FALSE@,$ELIX_LEVEL_2_FALSE,;t t -s,@ELIX_LEVEL_3_TRUE@,$ELIX_LEVEL_3_TRUE,;t t -s,@ELIX_LEVEL_3_FALSE@,$ELIX_LEVEL_3_FALSE,;t t -s,@ELIX_LEVEL_4_TRUE@,$ELIX_LEVEL_4_TRUE,;t t -s,@ELIX_LEVEL_4_FALSE@,$ELIX_LEVEL_4_FALSE,;t t -s,@USE_LIBTOOL_TRUE@,$USE_LIBTOOL_TRUE,;t t -s,@USE_LIBTOOL_FALSE@,$USE_LIBTOOL_FALSE,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@oext@,$oext,;t t -s,@aext@,$aext,;t t -s,@lpfx@,$lpfx,;t t -s,@libm_machine_dir@,$libm_machine_dir,;t t -s,@machine_dir@,$machine_dir,;t t -s,@sys_dir@,$sys_dir,;t t -s,@SED@,$SED,;t t -s,@DLLTOOL@,$DLLTOOL,;t t -s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t -s,@OBJDUMP@,$OBJDUMP,;t t -s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t -s,@LIBTOOL@,$LIBTOOL,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@EGREP@,$EGREP,;t t -s,@FGREP@,$FGREP,;t t -s,@GREP@,$GREP,;t t -s,@LD@,$LD,;t t -s,@DUMPBIN@,$DUMPBIN,;t t -s,@ac_ct_DUMPBIN@,$ac_ct_DUMPBIN,;t t -s,@NM@,$NM,;t t -s,@LN_S@,$LN_S,;t t -s,@lt_ECHO@,$lt_ECHO,;t t -s,@DSYMUTIL@,$DSYMUTIL,;t t -s,@ac_ct_DSYMUTIL@,$ac_ct_DSYMUTIL,;t t -s,@NMEDIT@,$NMEDIT,;t t -s,@ac_ct_NMEDIT@,$ac_ct_NMEDIT,;t t -s,@LIPO@,$LIPO,;t t -s,@ac_ct_LIPO@,$ac_ct_LIPO,;t t -s,@OTOOL@,$OTOOL,;t t -s,@ac_ct_OTOOL@,$ac_ct_OTOOL,;t t -s,@OTOOL64@,$OTOOL64,;t t -s,@ac_ct_OTOOL64@,$ac_ct_OTOOL64,;t t -s,@CPP@,$CPP,;t t -s,@subdirs@,$subdirs,;t t -s,@CRT0@,$CRT0,;t t -s,@HAVE_SYS_DIR_TRUE@,$HAVE_SYS_DIR_TRUE,;t t -s,@HAVE_SYS_DIR_FALSE@,$HAVE_SYS_DIR_FALSE,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat +if test -n "$CONFIG_FILES"; then + +_ACEOF + + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +MAY_SUPPLY_SYSCALLS_TRUE!$MAY_SUPPLY_SYSCALLS_TRUE$ac_delim +MAY_SUPPLY_SYSCALLS_FALSE!$MAY_SUPPLY_SYSCALLS_FALSE$ac_delim +newlib_basedir!$newlib_basedir$ac_delim +build!$build$ac_delim +build_cpu!$build_cpu$ac_delim +build_vendor!$build_vendor$ac_delim +build_os!$build_os$ac_delim +host!$host$ac_delim +host_cpu!$host_cpu$ac_delim +host_vendor!$host_vendor$ac_delim +host_os!$host_os$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +CYGPATH_W!$CYGPATH_W$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +install_sh!$install_sh$ac_delim +STRIP!$STRIP$ac_delim +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim +mkdir_p!$mkdir_p$ac_delim +AWK!$AWK$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +am__leading_dot!$am__leading_dot$ac_delim +AMTAR!$AMTAR$ac_delim +am__tar!$am__tar$ac_delim +am__untar!$am__untar$ac_delim +CC!$CC$ac_delim +DEPDIR!$DEPDIR$ac_delim +am__include!$am__include$ac_delim +am__quote!$am__quote$ac_delim +AMDEP_TRUE!$AMDEP_TRUE$ac_delim +AMDEP_FALSE!$AMDEP_FALSE$ac_delim +AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim +CCDEPMODE!$CCDEPMODE$ac_delim +am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim +am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim +AS!$AS$ac_delim +AR!$AR$ac_delim +RANLIB!$RANLIB$ac_delim +READELF!$READELF$ac_delim +MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim +MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim +MAINT!$MAINT$ac_delim +CCAS!$CCAS$ac_delim +CCASFLAGS!$CCASFLAGS$ac_delim +NEWLIB_CFLAGS!$NEWLIB_CFLAGS$ac_delim +LDFLAGS!$LDFLAGS$ac_delim +ELIX_LEVEL_0_TRUE!$ELIX_LEVEL_0_TRUE$ac_delim +ELIX_LEVEL_0_FALSE!$ELIX_LEVEL_0_FALSE$ac_delim +ELIX_LEVEL_1_TRUE!$ELIX_LEVEL_1_TRUE$ac_delim +ELIX_LEVEL_1_FALSE!$ELIX_LEVEL_1_FALSE$ac_delim +ELIX_LEVEL_2_TRUE!$ELIX_LEVEL_2_TRUE$ac_delim +ELIX_LEVEL_2_FALSE!$ELIX_LEVEL_2_FALSE$ac_delim +ELIX_LEVEL_3_TRUE!$ELIX_LEVEL_3_TRUE$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi -fi # test -n "$CONFIG_FILES" +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi + +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +CEOF$ac_eof +_ACEOF + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +ELIX_LEVEL_3_FALSE!$ELIX_LEVEL_3_FALSE$ac_delim +ELIX_LEVEL_4_TRUE!$ELIX_LEVEL_4_TRUE$ac_delim +ELIX_LEVEL_4_FALSE!$ELIX_LEVEL_4_FALSE$ac_delim +USE_LIBTOOL_TRUE!$USE_LIBTOOL_TRUE$ac_delim +USE_LIBTOOL_FALSE!$USE_LIBTOOL_FALSE$ac_delim +OBJEXT!$OBJEXT$ac_delim +oext!$oext$ac_delim +aext!$aext$ac_delim +lpfx!$lpfx$ac_delim +libm_machine_dir!$libm_machine_dir$ac_delim +machine_dir!$machine_dir$ac_delim +sys_dir!$sys_dir$ac_delim +SED!$SED$ac_delim +DLLTOOL!$DLLTOOL$ac_delim +OBJDUMP!$OBJDUMP$ac_delim +LIBTOOL!$LIBTOOL$ac_delim +CFLAGS!$CFLAGS$ac_delim +CPPFLAGS!$CPPFLAGS$ac_delim +ac_ct_CC!$ac_ct_CC$ac_delim +EXEEXT!$EXEEXT$ac_delim +GREP!$GREP$ac_delim +EGREP!$EGREP$ac_delim +FGREP!$FGREP$ac_delim +LD!$LD$ac_delim +DUMPBIN!$DUMPBIN$ac_delim +ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim +NM!$NM$ac_delim +LN_S!$LN_S$ac_delim +lt_ECHO!$lt_ECHO$ac_delim +DSYMUTIL!$DSYMUTIL$ac_delim +NMEDIT!$NMEDIT$ac_delim +LIPO!$LIPO$ac_delim +OTOOL!$OTOOL$ac_delim +OTOOL64!$OTOOL64$ac_delim +CPP!$CPP$ac_delim +subdirs!$subdirs$ac_delim +CRT0!$CRT0$ac_delim +HAVE_SYS_DIR_TRUE!$HAVE_SYS_DIR_TRUE$ac_delim +HAVE_SYS_DIR_FALSE!$HAVE_SYS_DIR_FALSE$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 41; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof _ACEOF + + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; +fi # test -n "$CONFIG_FILES" + + +for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + fi + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; esac - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || + ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + case $ac_mode in + :F) + # + # CONFIG_FILE + # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac +_ACEOF - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } +cat >>$CONFIG_STATUS <<\_ACEOF +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +case `sed -n '/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' $ac_file_inputs` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac _ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub @@ -12791,142 +13936,43 @@ cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } +s&@configure_input@&$configure_input&;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac + ;; -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 +echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. @@ -12936,18 +13982,29 @@ # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || + dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$mf" : 'X\(/\)' \| . 2>/dev/null || echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` else continue fi @@ -12969,49 +14026,76 @@ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || + fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$file" : 'X\(/\)' \| . 2>/dev/null || echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; - libtool ) + "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. @@ -13652,11 +14736,10 @@ chmod +x "$ofile" ;; + esac -done -_ACEOF +done # for ac_tag -cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF @@ -13686,7 +14769,7 @@ fi # -# CONFIG_SUBDIRS section, as fixed in confsubdir.m4. +# CONFIG_SUBDIRS section. # if test "$no_recursion" != yes; then @@ -13733,7 +14816,12 @@ case $ac_arg in *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - ac_sub_configure_args="$ac_arg $ac_sub_configure_args" + ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" + + # Pass --silent + if test "$silent" = yes; then + ac_sub_configure_args="--silent $ac_sub_configure_args" + fi ac_popdir=`pwd` for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue @@ -13742,97 +14830,83 @@ # parts of a large source tree are present. test -d "$srcdir/$ac_dir" || continue - { echo "$as_me:$LINENO: configuring in $ac_dir" >&5 -echo "$as_me: configuring in $ac_dir" >&6;} - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" + ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" + echo "$as_me:$LINENO: $ac_msg" >&5 + echo "$ac_msg" >&6 + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } - ac_builddir=. -if test "$ac_dir" != .; then +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" @@ -13856,8 +14930,8 @@ # Make the cache file name correct relative to the subdirectory. case $cache_file in [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; - *) # Relative path. - ac_sub_cache_file=$ac_top_builddir$cache_file ;; + *) # Relative name. + ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; esac { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 diff -Naur newlib-1.17.0/newlib/libc/sys/configure.in newlib-1.17.0-new/newlib/libc/sys/configure.in --- newlib-1.17.0/newlib/libc/sys/configure.in 2007-05-24 19:33:37.000000000 +0200 +++ newlib-1.17.0-new/newlib/libc/sys/configure.in 2009-05-22 09:57:50.000000000 +0200 @@ -24,6 +24,7 @@ a29khif) AC_CONFIG_SUBDIRS(a29khif) ;; arc) AC_CONFIG_SUBDIRS(arc) ;; arm) AC_CONFIG_SUBDIRS(arm) ;; + avr32) AC_CONFIG_SUBDIRS(avr32) ;; d10v) AC_CONFIG_SUBDIRS(d10v) ;; decstation) AC_CONFIG_SUBDIRS(decstation) ;; h8300hms) AC_CONFIG_SUBDIRS(h8300hms) ;;