# Makefile.in for building crosstool-NG

# This file serves as source for the ./configure operation

# This series of test is here because GNU make 3.81 will *not* use MAKEFLAGS

# to set additional flags in the current Makfile ( see:

# http://savannah.gnu.org/bugs/?20501 ), although the make manual says it

# should ( see: http://www.gnu.org/software/make/manual/make.html#Options_002fRecursion )

# so we have to work it around by calling ourselves back if needed

# So why do we need not to use the built rules and variables? Because we

# need to generate scripts/crosstool-NG.sh from scripts/crosstool-NG.sh.in

# and there is a built-in implicit rule '%.sh:' that has neither a pre-requisite

# nor a command associated, and that built-in implicit rule takes precedence

# over our non-built-in implicit rule '%: %.in', below.

# CT_MAKEFLAGS will be used later, below...

# Do not print directories as we descend into them

ifeq ($(filter --no-print-directory,$(MAKEFLAGS)),)

CT_MAKEFLAGS += --no-print-directory

endif

# Use neither builtin rules, nor builtin variables

# Note: dual test, because if -R and -r are given on the command line

# (who knows?), MAKEFLAGS contains 'Rr' instead of '-Rr', while adding

# '-Rr' to MAKEFLAGS adds it literaly ( and does not add 'Rr' )

ifeq ($(filter Rr,$(MAKEFLAGS)),)

ifeq ($(filter -Rr,$(MAKEFLAGS)),)

CT_MAKEFLAGS += -Rr

endif # No -Rr

endif # No Rr

# Remove any suffix rules

.SUFFIXES:

all: Makefile build

###############################################################################

# Configuration variables

VERSION:= @@VERSION@@

BINDIR := @@BINDIR@@

LIBDIR := @@LIBDIR@@

DOCDIR := @@DOCDIR@@

MANDIR := @@MANDIR@@

DATE   := @@DATE@@

LOCAL  := @@LOCAL@@

# Paths found by ./configure

install:= @@install@@

bash   := @@bash@@

grep   := @@grep@@

make   := @@make@@

sed    := @@sed@@

libtool:= @@libtool@@

objcopy:= @@objcopy@@

objdump:= @@objdump@@

readelf:= @@readelf@@

patch  := @@patch@@

# config options to push down to kconfig

KCONFIG:= @@KCONFIG@@

###############################################################################

# Non-configure variables

MAN_SECTION := 1

MAN_SUBDIR := /man$(MAN_SECTION)

###############################################################################

# Sanity checks

# Check if Makefile is up to date:

Makefile: Makefile.in

	@echo "$< did changed: you must re-run './configure'"

	@false

# If installing with DESTDIR, check it's an absolute path

ifneq ($(strip $(DESTDIR)),)

  ifneq ($(DESTDIR),$(abspath /$(DESTDIR)))

    $(error DESTDIR is not an absolute PATH: '$(DESTDIR)')

  endif

endif

###############################################################################

# Global make rules

# If any extra MAKEFLAGS were added, re-run ourselves

# See top of file for an explanation of why this is needed...

ifneq ($(strip $(CT_MAKEFLAGS)),)

# Somehow, the new auto-completion for make in the recent distributions

# trigger a behavior where our Makefile calls itself recursively, in a

# never-ending loop (except on lack of ressources, swap, PIDs...)

# Avoid this situation by cutting the recursion short at the first

# level.

# This has the side effect of only showing the real targets, and hiding our

# internal ones. :-)

ifneq ($(MAKELEVEL),0)

$(error Recursion detected, bailing out...)

endif

MAKEFLAGS += $(CT_MAKEFLAGS)

build install clean distclean uninstall:

	@$(MAKE) $@

else

# There were no additional MAKEFLAGS to add, do the job

TARGETS := bin lib doc man

build: $(patsubst %,build-%,$(TARGETS))

install: build real-install

clean: $(patsubst %,clean-%,$(TARGETS))

distclean: clean

	@echo "  RM     'Makefile'"

	@rm -f Makefile

uninstall: real-uninstall

###############################################################################

# Specific make rules

#--------------------------------------

# Build rules

build-bin: ct-ng scripts/crosstool-NG.sh scripts/saveSample.sh scripts/showTuple.sh

	@chmod 755 $^

build-lib: paths.mk config/configure.in

build-doc:

build-man: docs/ct-ng.1.gz

docs/ct-ng.1.gz: docs/ct-ng.1

	@echo "  GZIP   '$@'"

	@gzip -c9 $< >$@

%: %.in Makefile

	@echo "  SED    '$@'"

	@$(sed) -r -e 's,@@CT_BINDIR@@,$(BINDIR),g;'    \

	           -e 's,@@CT_LIBDIR@@,$(LIBDIR),g;'    \

	           -e 's,@@CT_DOCDIR@@,$(DOCDIR),g;'    \

	           -e 's,@@CT_MANDIR@@,$(MANDIR),g;'    \

	           -e 's,@@CT_VERSION@@,$(VERSION),g;'	\

	           -e 's,@@CT_DATE@@,$(DATE),g;'        \

	           -e 's,@@CT_make@@,$(make),g;'        \

	           -e 's,@@CT_bash@@,$(bash),g;'        \

	           $@.in >$@

# We create a script fragment that is parseable from inside a Makefile,

# but also from inside a shell script, hence the reason why we don't

# use := to set variables, although that will incur a (very small)

# penalty from the Makefile that includes it (due to re-evaluation at

# each call).

paths.mk: FORCE

	@echo "  GEN    '$@'"

	@(echo "export install=$(install)"; \

	  echo "export bash=$(bash)";       \

	  echo "export grep=$(grep)";       \

	  echo "export make=$(make)";       \

	  echo "export sed=$(sed)";         \

	  echo "export libtool=$(libtool)"; \

	  echo "export objcopy=$(objcopy)"; \

	  echo "export objdump=$(objdump)"; \

	  echo "export readelf=$(readelf)"; \

	  echo "export patch=$(patch)";     \

	 ) >paths.mk

config/configure.in: FORCE

	@echo "  GEN    '$@'"

	@{  printf "# Generated file, do not edit\n";            \

	    printf "# Default values as found by ./configure\n"; \

	    for var in $(KCONFIG); do                            \

	        printf "\n";                                     \

	        printf "config CONFIGURE_$${var%%=*}\n";         \

	        printf "    bool\n";                             \

	        if [ "$${var#*=}" = "y" ]; then                  \

	            printf "    default y\n";                    \

	        fi;                                              \

	    done;                                                \

	 } >$@

FORCE:

#--------------------------------------

# Clean rules

clean-bin:

	@echo "  RM     'ct-ng'"

	@rm -f ct-ng

	@echo "  RM     'scripts/crosstool-NG.sh'"

	@rm -f scripts/crosstool-NG.sh

	@echo "  RM     'scripts/saveSample.sh'"

	@rm -f scripts/saveSample.sh

	@echo "  RM     'scripts/showTuple.sh'"

	@rm -f scripts/showTuple.sh

clean-lib:

	@echo "  RM     'paths.mk'"

	@rm -f paths.mk

	@echo "  RM     'config/configure.in'"

	@rm -f config/configure.in

clean-doc:

clean-man:

	@echo "  RM     'docs/ct-ng.1'"

	@rm -f docs/ct-ng.1

	@echo "  RM     'docs/ct-ng.1.gz'"

	@rm -f docs/ct-ng.1.gz

#--------------------------------------

# Check for --local setup

ifeq ($(strip $(LOCAL)),y)

real-install:

	@true

real-uninstall:

	@true

else

#--------------------------------------

# Install rules

real-install: $(patsubst %,install-%,$(TARGETS)) install-post

install-bin: $(DESTDIR)$(BINDIR)

	@echo "  INST    'ct-ng'"

	@$(install) -m 755 ct-ng "$(DESTDIR)$(BINDIR)/ct-ng"

# If one is hacking crosstool-NG, the patch set might change between any two

# installations of the same VERSION, thus the patches must be removed prior

# to being installed. It is simpler to remove the whole lib/ directory, as it

# is the goal of the install-lib rule to install the lib/ directory...

install-lib: uninstall-lib $(DESTDIR)$(LIBDIR) install-lib-main install-lib-samples

LIB_SUB_DIR := config contrib kconfig patches scripts

$(patsubst %,install-lib-%-copy,$(LIB_SUB_DIR)): $(DESTDIR)$(LIBDIR)

	@echo "  INSTDIR '$(patsubst install-lib-%-copy,%,$(@))/'"

	@tar cf - --exclude='*.sh.in' $(patsubst install-lib-%-copy,%,$(@)) \

	 |(cd "$(DESTDIR)$(LIBDIR)"; tar xf -)

# Huh? It seems we need at least one command to make this rule kick-in.

install-lib-%: install-lib-%-copy; @true

# Huh? that one does not inherit the -opy dependency, above...

install-lib-scripts: install-lib-scripts-copy

	@chmod a+x $(DESTDIR)$(LIBDIR)/scripts/crosstool-NG.sh

	@chmod a+x $(DESTDIR)$(LIBDIR)/scripts/saveSample.sh

	@rm -f "$(DESTDIR)$(LIBDIR)/scripts/addToolVersion.sh"

install-lib-main: $(DESTDIR)$(LIBDIR) $(patsubst %,install-lib-%,$(LIB_SUB_DIR))

	@echo "  INST    'steps.mk'"

	@$(install) -m 644 steps.mk "$(DESTDIR)$(LIBDIR)/steps.mk"

	@echo "  INST    'paths.mk'"

	@$(install) -m 644 paths.mk "$(DESTDIR)$(LIBDIR)/paths.mk"

# Samples need a little love:

#  - change every occurrence of CT_TOP_DIR to CT_LIB_DIR

install-lib-samples: $(DESTDIR)$(LIBDIR) install-lib-main

	@echo "  INSTDIR 'samples/'"

	@for samp_dir in samples/*/; do                                         \

	     mkdir -p "$(DESTDIR)$(LIBDIR)/$${samp_dir}";                       \

	     $(sed) -r -e 's:\$$\{CT_TOP_DIR\}:\$$\{CT_LIB_DIR\}:;'             \

	               -e 's:^(CT_WORK_DIR)=.*:\1="\$${CT_TOP_DIR}/.build":;'   \

	            $${samp_dir}/crosstool.config                               \

	            >"$(DESTDIR)$(LIBDIR)/$${samp_dir}/crosstool.config";       \

	     $(install) -m 644 "$${samp_dir}/reported.by"                       \

	                       "$(DESTDIR)$(LIBDIR)/$${samp_dir}";              \

	     for libc_cfg in "$${samp_dir}/"*libc*.config; do                   \

	         [ -f "$${libc_cfg}" ] || continue;                             \

	         $(install) -m 644 "$${libc_cfg}"                               \

	                           "$(DESTDIR)$(LIBDIR)/$${samp_dir}";          \

	     done;                                                              \

	 done

	@$(install) -m 644 samples/samples.mk "$(DESTDIR)$(LIBDIR)/samples/samples.mk"

install-doc: $(DESTDIR)$(DOCDIR)

	@echo "  INST    'docs/*.txt'"

	@for doc_file in docs/*.txt; do                              \

	     $(install) -m 644 "$${doc_file}" "$(DESTDIR)$(DOCDIR)"; \

	 done

install-man: $(DESTDIR)$(MANDIR)$(MAN_SUBDIR)

	@echo "  INST    'ct-ng.1.gz'"

	@$(install) -m 644 docs/ct-ng.1.gz "$(DESTDIR)$(MANDIR)$(MAN_SUBDIR)"

$(sort $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(DOCDIR) $(DESTDIR)$(MANDIR)$(MAN_SUBDIR)):

	@echo "  MKDIR   '$@/'"

	@$(install) -m 755 -d "$@"

install-post:

	@echo

	@echo "For auto-completion, do not forget to install 'ct-ng.comp' into"

	@echo "your bash completion directory (usually /etc/bash_completion.d)"

#--------------------------------------

# Uninstall rules

real-uninstall: $(patsubst %,uninstall-%,$(TARGETS))

uninstall-bin:

	@echo "  RM      '$(DESTDIR)$(BINDIR)/ct-ng'"

	@rm -f "$(DESTDIR)$(BINDIR)/ct-ng"

uninstall-lib:

	@echo "  RMDIR   '$(DESTDIR)$(LIBDIR)/'"

	@rm -rf "$(DESTDIR)$(LIBDIR)"

uninstall-doc:

	@echo "  RMDIR   '$(DESTDIR)$(DOCDIR)/'"

	@rm -rf "$(DESTDIR)$(DOCDIR)"

uninstall-man:

	@echo "  RM      '$(DESTDIR)$(MANDIR)$(MAN_SUBDIR)/ct-ng.1.gz'"

	@rm -f "$(DESTDIR)$(MANDIR)$(MAN_SUBDIR)/ct-ng.1"{,.gz}

endif # Not --local

endif # No extra MAKEFLAGS were added