# This file contains the functions common to glibc and eglibc

# Extract the C library tarball(s)

do_libc_extract() {

    local addon

    # Extract the main tarball

    CT_Extract "${CT_LIBC}-${CT_LIBC_VERSION}"

    CT_Pushd "${CT_SRC_DIR}/${CT_LIBC}-${CT_LIBC_VERSION}"

    CT_Patch nochdir "${CT_LIBC}" "${CT_LIBC_VERSION}"

    # Extract the add-opns

    for addon in $(do_libc_add_ons_list " "); do

        # If the addon was bundled with the main archive, we do not

        # need to extract it. Worse, if we were to try to extract

        # it, we'd get an error.

        if [ -d "${addon}" ]; then

            CT_DoLog DEBUG "Add-on already present, spkipping extraction"

            continue

        fi

        CT_Extract nochdir "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"

        CT_TestAndAbort "Error in add-on '${addon}': both short and long names in tarball" \

            -d "${addon}" -a -d "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"

        # Some addons have the 'long' name, while others have the

        # 'short' name, but patches are non-uniformly built with

        # either the 'long' or 'short' name, whatever the addons name

        # but we prefer the 'short' name and avoid duplicates.

        if [ -d "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}" ]; then

            CT_DoExecLog FILE mv "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}" "${addon}"

        fi

        CT_DoExecLog FILE ln -s "${addon}" "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"

        CT_Patch nochdir "${CT_LIBC}" "${addon}-${CT_LIBC_VERSION}"

        # Remove the long name since it can confuse configure scripts to run

        # the same source twice.

        rm "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"

    done

    # The configure files may be older than the configure.in files

    # if using a snapshot (or even some tarballs). Fake them being

    # up to date.

    find . -type f -name configure -exec touch {} \; 2>&1 |CT_DoLog ALL

    CT_Popd

    if [ "${CT_LIBC_LOCALES}" = "y" ]; then

        do_libc_locales_extract

    fi

}

# Build and install headers and start files

do_libc_start_files() {

    # Start files and Headers should be configured the same way as the

    # final libc, but built and installed differently.

    do_libc_backend libc_mode=startfiles

}

# This function builds and install the full C library

do_libc() {

    do_libc_backend libc_mode=final

}

# Usage: do_libc_backend param=value [...]

#   Parameter           : Definition                            : Type      : Default

#   libc_mode           : 'startfiles' or 'final'               : string    : (none)

#   extra_flags         : Extra CFLAGS to use (for multilib)    : string    : (empty)

#   extra_dir           : Extra subdir for multilib             : string    : (empty)

do_libc_backend() {

    local libc_mode

    local extra_flags

    local extra_dir

    local src_dir="${CT_SRC_DIR}/${CT_LIBC}-${CT_LIBC_VERSION}"

    local extra_cc_args

    local -a extra_config

    local -a extra_make_args

    local glibc_cflags

    local float_extra

    local endian_extra

    while [ $# -ne 0 ]; do

        eval "${1// /\\ }"

        shift

    done

    case "${libc_mode}" in

        startfiles) CT_DoStep INFO "Installing C library headers & start files";;

        final)      CT_DoStep INFO "Installing C library";;

        *)          CT_Abort "Unsupported (or unset) libc_mode='${libc_mode}'";;

    esac

    mkdir -p "${CT_BUILD_DIR}/build-libc-${libc_mode}${extra_dir//\//_}"

    cd "${CT_BUILD_DIR}/build-libc-${libc_mode}${extra_dir//\//_}"

    CT_DoLog EXTRA "Configuring C library"

    case "${CT_LIBC}" in

        eglibc)

            if [ "${CT_EGLIBC_CUSTOM_CONFIG}" = "y" ]; then

                CT_DoExecLog ALL cp "${CT_CONFIG_DIR}/eglibc.config" option-groups.config

            fi

            if [ "${CT_EGLIBC_OPT_SIZE}" = "y" ]; then

                OPTIMIZE=-Os

            else

                OPTIMIZE=-O2

            fi

            ;;

        glibc)

            # glibc can't be built without -O2 (reference needed!)

            OPTIMIZE=-O2

            # Also, if those two are missing, iconv build breaks

            extra_config+=( --disable-debug --disable-sanity-checks )

            ;;

    esac

    # Add some default glibc config options if not given by user.

    # We don't need to be conditional on wether the user did set different

    # values, as they CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY is passed after

    # extra_config

    extra_config+=("$(do_libc_min_kernel_config)")

    case "${CT_THREADS}" in

        nptl)           extra_config+=("--with-__thread" "--with-tls");;

        linuxthreads)   extra_config+=("--with-__thread" "--without-tls" "--without-nptl");;

        none)           extra_config+=("--without-__thread" "--without-nptl")

                        case "${CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY[*]}" in

                            *-tls*) ;;

                            *) extra_config+=("--without-tls");;

                        esac

                        ;;

    esac

    case "${CT_SHARED_LIBS}" in

        y) extra_config+=("--enable-shared");;

        *) extra_config+=("--disable-shared");;

    esac

    float_extra="$( echo "${extra_flags}"       \

                    |${sed} -r -e '/^(.*[[:space:]])?-m(hard|soft)-float([[:space:]].*)?$/!d;'  \

                               -e 's//\2/;'     \

                  )"

    case "${float_extra}" in

        hard)   extra_config+=("--with-fp");;

        soft)   extra_config+=("--without-fp");;

        "")

            case "${CT_ARCH_FLOAT}" in

                hard|softfp)    extra_config+=("--with-fp");;

                soft)           extra_config+=("--without-fp");;

            esac

            ;;

    esac

    if [ "${CT_LIBC_DISABLE_VERSIONING}" = "y" ]; then

        extra_config+=("--disable-versioning")

    fi

    if [ "${CT_LIBC_OLDEST_ABI}" != "" ]; then

        extra_config+=("--enable-oldest-abi=${CT_LIBC_OLDEST_ABI}")

    fi

    case "$(do_libc_add_ons_list ,)" in

        "") extra_config+=("--enable-add-ons=no");;

        *)  extra_config+=("--enable-add-ons=$(do_libc_add_ons_list ,)");;

    esac

    if [ "${CT_LIBC_EGLIBC_HAS_PKGVERSION_BUGURL}" = "y" ]; then

        extra_config+=("--with-pkgversion=${CT_PKGVERSION}")

        [ -n "${CT_TOOLCHAIN_BUGURL}" ] && extra_config+=("--with-bugurl=${CT_TOOLCHAIN_BUGURL}")

    fi

    # Extract the endianness options if any

    # This should cover all possible endianness options

    # in gcc, but it is prone to bit-rot... :-(

    endian_extra="$( echo "${extra_flags}"      \

                     |${sed} -r -e '/^(.*[[:space:]])?-(E[BL]|m((big|little)(-endian)?|e?[bl]))([[:space:]].*)?$/!d;' \

                                -e 's//\2/;'    \

                   )"

    case "${endian_extra}" in

        EB|mbig-endian|mbig|meb|mb)

            extra_cc_args="${extra_cc_args} ${endian_extra}"

            ;;

        EL|mlittle-endian|mlittle|mel|ml)

            extra_cc_args="${extra_cc_args} ${endian_extra}"

            ;;

        "") extra_cc_args="${extra_cc_args} ${CT_ARCH_ENDIAN_OPT}"

            ;;

    esac

    touch config.cache

    if [ "${CT_LIBC_GLIBC_FORCE_UNWIND}" = "y" ]; then

        echo "libc_cv_forced_unwind=yes" >>config.cache

        echo "libc_cv_c_cleanup=yes" >>config.cache

    fi

    # Pre-seed the configparms file with values from the config option

    printf "${CT_LIBC_GLIBC_CONFIGPARMS}\n" > configparms

    cross_cc=$(CT_Which "${CT_TARGET}-gcc")

    extra_cc_args+=" ${extra_flags}"

    CT_DoLog DEBUG "Using gcc for target:     '${cross_cc}'"

    CT_DoLog DEBUG "Configuring with addons : '$(do_libc_add_ons_list ,)'"

    CT_DoLog DEBUG "Extra config args passed: '${extra_config[*]}'"

    CT_DoLog DEBUG "Extra CC args passed    : '${extra_cc_args}'"

    CT_DoLog DEBUG "Extra flags (multilib)  : '${extra_flags}'"

    glibc_cflags="${CT_TARGET_CFLAGS} ${CT_LIBC_GLIBC_EXTRA_CFLAGS} ${OPTIMIZE}"

    case "${CT_LIBC_ENABLE_FORTIFIED_BUILD}" in

        y)  ;;

        *)  glibc_cflags+=" -U_FORTIFY_SOURCE";;

    esac

    # ./configure is mislead by our tools override wrapper for bash

    # so just tell it where the real bash is _on_the_target_!

    # Notes:

    # - ${ac_cv_path_BASH_SHELL} is only used to set BASH_SHELL

    # - ${BASH_SHELL}            is only used to set BASH

    # - ${BASH}                  is only used to set the shebang

    #                            in two scripts to run on the target

    # So we can safely bypass bash detection at compile time.

    # Should this change in a future eglibc release, we'd better

    # directly mangle the generated scripts _after_ they get built,

    # or even after they get installed... eglibc is such a sucker...

    echo "ac_cv_path_BASH_SHELL=/bin/bash" >>config.cache

    # Configure with --prefix the way we want it on the target...

    # There are a whole lot of settings here.  You'll probably want

    # to read up on what they all mean, and customize a bit, possibly by setting GLIBC_EXTRA_CONFIG_ARRAY

    # Compare these options with the ones used when installing the glibc headers above - they're different.

    # Adding "--without-gd" option to avoid error "memusagestat.c:36:16: gd.h: No such file or directory"

    # See also http://sources.redhat.com/ml/libc-alpha/2000-07/msg00024.html.

    # Set BUILD_CC, or we won't be able to build datafiles

    # Run explicitly through CONFIG_SHELL, or the build breaks badly (loop-of-death)

    # when the shell is not bash... Sigh... :-(

    CT_DoExecLog CFG                                                \

    BUILD_CC="${CT_BUILD}-gcc"                                      \

    CFLAGS="${glibc_cflags}"                                        \

    CC="${CT_TARGET}-gcc ${CT_LIBC_EXTRA_CC_ARGS} ${extra_cc_args}" \

    AR=${CT_TARGET}-ar                                              \

    RANLIB=${CT_TARGET}-ranlib                                      \

    "${CONFIG_SHELL}"                                               \

    "${src_dir}/configure"                                          \

        --prefix=/usr                                               \

        --build=${CT_BUILD}                                         \

        --host=${CT_TARGET}                                         \

        --cache-file="$(pwd)/config.cache"                          \

        --without-cvs                                               \

        --disable-profile                                           \

        --without-gd                                                \

        --with-headers="${CT_HEADERS_DIR}"                          \

        "${extra_config[@]}"                                        \

        "${CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY[@]}"

    # build hacks

    case "${CT_ARCH},${CT_ARCH_CPU}" in

        powerpc,8??)

            # http://sourceware.org/ml/crossgcc/2008-10/msg00068.html

            CT_DoLog DEBUG "Activating support for memset on broken ppc-8xx (CPU15 erratum)"

            extra_make_args+=( ASFLAGS="-DBROKEN_PPC_8xx_CPU15" )

            ;;

    esac

    if [ "${libc_mode}" = "startfiles" ]; then

        CT_DoLog EXTRA "Installing C library headers"

        # use the 'install-headers' makefile target to install the

        # headers

        CT_DoExecLog ALL make ${JOBSFLAGS}              \

                         install_root=${CT_SYSROOT_DIR}${extra_dir} \

                         install-bootstrap-headers=yes  \

                         "${extra_make_args[@]}"        \

                         install-headers

        # For glibc, a few headers need to be manually installed

        if [ "${CT_LIBC}" = "glibc" ]; then

            # Two headers -- stubs.h and features.h -- aren't installed by install-headers,

            # so do them by hand.  We can tolerate an empty stubs.h for the moment.

            # See e.g. http://gcc.gnu.org/ml/gcc/2002-01/msg00900.html

            mkdir -p "${CT_HEADERS_DIR}/gnu"

            CT_DoExecLog ALL touch "${CT_HEADERS_DIR}/gnu/stubs.h"

            CT_DoExecLog ALL cp -v "${CT_SRC_DIR}/glibc-${CT_LIBC_VERSION}/include/features.h"  \

                                   "${CT_HEADERS_DIR}/features.h"

            # Building the bootstrap gcc requires either setting inhibit_libc, or

            # having a copy of stdio_lim.h... see

            # http://sources.redhat.com/ml/libc-alpha/2003-11/msg00045.html

            CT_DoExecLog ALL cp -v bits/stdio_lim.h "${CT_HEADERS_DIR}/bits/stdio_lim.h"

            # Following error building gcc-4.0.0's gcj:

            #  error: bits/syscall.h: No such file or directory

            # solved by following copy; see http://sourceware.org/ml/crossgcc/2005-05/msg00168.html

            # but it breaks arm, see http://sourceware.org/ml/crossgcc/2006-01/msg00091.html

            case "${CT_ARCH}" in

                arm)    ;;

                *)  CT_DoExecLog ALL cp -v "misc/syscall-list.h"            \

                                           "${CT_HEADERS_DIR}/bits/syscall.h"

                    ;;

            esac

        fi

        if [ "${CT_THREADS}" = "nptl" ]; then

            CT_DoLog EXTRA "Installing C library start files"

            # there are a few object files needed to link shared libraries,

            # which we build and install by hand

            CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}${extra_dir}/usr/lib"

            CT_DoExecLog ALL make ${JOBSFLAGS}  \

                        "${extra_make_args[@]}" \

                        csu/subdir_lib

            CT_DoExecLog ALL cp csu/crt1.o csu/crti.o csu/crtn.o \

                                "${CT_SYSROOT_DIR}${extra_dir}/usr/lib"

            # Finally, 'libgcc_s.so' requires a 'libc.so' to link against.

            # However, since we will never actually execute its code,

            # it doesn't matter what it contains.  So, treating '/dev/null'

            # as a C source file, we produce a dummy 'libc.so' in one step

            CT_DoExecLog ALL "${cross_cc}" -nostdlib        \

                                           -nostartfiles    \

                                           -shared          \

                                           -x c /dev/null   \

                                           -o "${CT_SYSROOT_DIR}${extra_dir}/usr/lib/libc.so"

        fi # threads == nptl

    else # libc_mode = final

        CT_DoLog EXTRA "Building C library"

        CT_DoExecLog ALL make ${JOBSFLAGS}                      \

                              "${extra_make_args[@]}"           \

                              all

        CT_DoLog EXTRA "Installing C library"

        CT_DoExecLog ALL make ${JOBSFLAGS}                      \

                              "${extra_make_args[@]}"           \

                              install_root="${CT_SYSROOT_DIR}${extra_dir}"  \

                              install

        if [ "${CT_BUILD_MANUALS}" = "y" ]; then

            CT_DoLog EXTRA "Building and installing the C library manual"

            # Omit JOBSFLAGS as GLIBC has problems building the

            # manuals in parallel

            CT_DoExecLog ALL make pdf html

            # EGLIBC doesn't have a install-{pdf.html} and leaves the manuals

            # in the source directory

            CT_DoExecLog ALL mkdir -p ${CT_PREFIX_DIR}/share/doc

            CT_DoExecLog ALL cp -av ${src_dir}/manual/*.pdf ${src_dir}/manual/libc \

                ${CT_PREFIX_DIR}/share/doc

        fi

        if [ "${CT_LIBC_LOCALES}" = "y" ]; then

            do_libc_locales

        fi

    fi

    CT_EndStep

}

# This function finishes the C library install

# This is a no-op

do_libc_finish() {

    :

}

# Build up the addons list, separated with $1

do_libc_add_ons_list() {

    local sep="$1"

    local addons_list="$( echo "${CT_LIBC_ADDONS_LIST}"         \

                          |sed -r -e "s/[[:space:],]/${sep}/g;" \

                        )"

    case "${CT_THREADS}" in

        none)   ;;

        *)      addons_list="${addons_list}${sep}${CT_THREADS}";;

    esac

    [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && addons_list="${addons_list}${sep}ports"

    # Remove duplicate, leading and trailing separators

    echo "${addons_list}" |sed -r -e "s/${sep}+/${sep}/g; s/^${sep}//; s/${sep}\$//;"

}

# Compute up the minimum supported Linux kernel version

do_libc_min_kernel_config() {

    local min_kernel_config

    case "${CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY[*]}" in

        *--enable-kernel*) ;;

        *)  if [ "${CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS}" = "y" ]; then

                # We can't rely on the kernel version from the configuration,

                # because it might not be available if the user uses pre-installed

                # headers. On the other hand, both method will have the kernel

                # version installed in "usr/include/linux/version.h" in the sysroot.

                # Parse that instead of having two code-paths.

                version_code_file="${CT_SYSROOT_DIR}/usr/include/linux/version.h"

                if [ ! -f "${version_code_file}" -o ! -r "${version_code_file}" ]; then

                    CT_Abort "Linux version is unavailable in installed headers files"

                fi

                version_code="$( grep -E LINUX_VERSION_CODE "${version_code_file}"  \

                                 |cut -d ' ' -f 3                                   \

                               )"

                version=$(((version_code>>16)&0xFF))

                patchlevel=$(((version_code>>8)&0xFF))

                sublevel=$((version_code&0xFF))

                min_kernel_config="${version}.${patchlevel}.${sublevel}"

            elif [ "${CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN}" = "y" ]; then

                # Trim the fourth part of the linux version, keeping only the first three numbers

                min_kernel_config="$( echo "${CT_LIBC_GLIBC_MIN_KERNEL_VERSION}"            \

                                      |sed -r -e 's/^([^.]+\.[^.]+\.[^.]+)(|\.[^.]+)$/\1/;' \

                                    )"

            fi

            echo "--enable-kernel=${min_kernel_config}"

            ;;

    esac

}