# Build script for the gdb debug facility

# The version of ncurses to use. Yes, it's hard-coded.

# It's used only internally by crosstool-NG, and is

# not exposed outside, so we don't care about providing

# config options for this.

CT_DEBUG_GDB_NCURSES_VERSION="5.7"

# Ditto for the expat library

CT_DEBUG_GDB_EXPAT_VERSION="2.0.1"

do_debug_gdb_parts() {

    do_gdb=

    do_ncurses=

    do_expat=

    if [ "${CT_GDB_CROSS}" = y ]; then

        do_gdb=y

    fi

    if [ "${CT_GDB_GDBSERVER}" = "y" ]; then

        do_gdb=y

    fi

    if [ "${CT_GDB_NATIVE}" = "y" ]; then

        do_gdb=y

        # GDB on Mingw depends on PDcurses, not ncurses

        if [ "${CT_MINGW32}" != "y" ]; then

            do_ncurses=y

        fi

        do_expat=y

    fi

}

do_debug_gdb_get() {

    do_debug_gdb_parts

    if [ "${do_gdb}" = "y" ]; then

        CT_GetFile "gdb-${CT_GDB_VERSION}"                          \

                   {ftp,http}://ftp.gnu.org/pub/gnu/gdb             \

                   ftp://sources.redhat.com/pub/gdb/{,old-}releases

    fi

    if [ "${do_ncurses}" = "y" ]; then

        CT_GetFile "ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}" .tar.gz  \

                   {ftp,http}://ftp.gnu.org/pub/gnu/ncurses \

                   ftp://invisible-island.net/ncurses

    fi

    if [ "${do_expat}" = "y" ]; then

        CT_GetFile "expat-${CT_DEBUG_GDB_EXPAT_VERSION}" .tar.gz    \

                   http://mesh.dl.sourceforge.net/sourceforge/expat/expat/${CT_DEBUG_GDB_EXPAT_VERSION}

    fi

}

do_debug_gdb_extract() {

    do_debug_gdb_parts

    if [ "${do_gdb}" = "y" ]; then

        CT_Extract "gdb-${CT_GDB_VERSION}"

        CT_Patch "gdb" "${CT_GDB_VERSION}"

    fi

    if [ "${do_ncurses}" = "y" ]; then

        CT_Extract "ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}"

        CT_Patch "ncurses" "${CT_DEBUG_GDB_NCURSES_VERSION}"

    fi

    if [ "${do_expat}" = "y" ]; then

        CT_Extract "expat-${CT_DEBUG_GDB_EXPAT_VERSION}"

        CT_Patch "expat" "${CT_DEBUG_GDB_EXPAT_VERSION}"

    fi

}

do_debug_gdb_build() {

    local -a extra_config

    do_debug_gdb_parts

    gdb_src_dir="${CT_SRC_DIR}/gdb-${CT_GDB_VERSION}"

    # Version 6.3 and below behave badly with gdbmi

    case "${CT_GDB_VERSION}" in

        6.2*|6.3)   extra_config+=("--disable-gdbmi");;

    esac

    if [ "${CT_GDB_CROSS}" = "y" ]; then

        local -a cross_extra_config

        CT_DoStep INFO "Installing cross-gdb"

        CT_DoLog EXTRA "Configuring cross-gdb"

        mkdir -p "${CT_BUILD_DIR}/build-gdb-cross"

        cd "${CT_BUILD_DIR}/build-gdb-cross"

        cross_extra_config=("${extra_config[@]}")

        case "${CT_THREADS}" in

            none)   cross_extra_config+=("--disable-threads");;

            *)      cross_extra_config+=("--enable-threads");;

        esac

        CC_for_gdb=

        LD_for_gdb=

        if [ "${CT_GDB_CROSS_STATIC}" = "y" ]; then

            CC_for_gdb="gcc -static"

            LD_for_gdb="ld -static"

        fi

        gdb_cross_configure="${gdb_src_dir}/configure"

        CT_DoLog DEBUG "Extra config passed: '${cross_extra_config[*]}'"

        CC="${CC_for_gdb}"                              \

        LD="${LD_for_gdb}"                              \

        CT_DoExecLog CFG                                \

        "${gdb_cross_configure}"                        \

            --build=${CT_BUILD}                         \

            --host=${CT_HOST}                           \

            --target=${CT_TARGET}                       \

            --prefix="${CT_PREFIX_DIR}"                 \

            --with-build-sysroot="${CT_SYSROOT_DIR}"    \

            --disable-werror                            \

            "${cross_extra_config[@]}"

        CT_DoLog EXTRA "Building cross-gdb"

        CT_DoExecLog ALL make ${PARALLELMFLAGS}

        CT_DoLog EXTRA "Installing cross-gdb"

        CT_DoExecLog ALL make install

        CT_EndStep

    fi

    if [ "${CT_GDB_NATIVE}" = "y" ]; then

        local -a native_extra_config

        local -a ncurses_opt

        local -a gdb_native_CFLAGS

        CT_DoStep INFO "Installing native gdb"

        native_extra_config=("${extra_config[@]}")

        # GDB on Mingw depends on PDcurses, not ncurses

        if [ "${do_ncurses}" = "y" ]; then

            CT_DoLog EXTRA "Building static target ncurses"

            [ "${CT_CC_LANG_CXX}" = "y" ] || ncurses_opts+=("--without-cxx" "--without-cxx-binding")

            [ "${CT_CC_LANG_ADA}" = "y" ] || ncurses_opts+=("--without-ada")

            mkdir -p "${CT_BUILD_DIR}/build-ncurses-build-tic"

            cd "${CT_BUILD_DIR}/build-ncurses-build-tic"

            # Use build = CT_REAL_BUILD so that configure thinks it is

            # cross-compiling, and thus will use the ${CT_BUILD}-*

            # tools instead of searching for the native ones...

            CT_DoExecLog CFG                                                    \

            "${CT_SRC_DIR}/ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}/configure"   \

                --build=${CT_BUILD}                                             \

                --host=${CT_BUILD}                                              \

                --prefix=/usr                                                   \

                --without-shared                                                \

                --enable-symlinks                                               \

                --with-build-cc=${CT_REAL_BUILD}-gcc                            \

                --with-build-cpp=${CT_REAL_BUILD}-gcc                           \

                --with-build-cflags="${CT_CFLAGS_FOR_HOST}"                     \

                "${ncurses_opts[@]}"

            # Under some operating systems (eg. Winblows), there is an

            # extension appended to executables. Find that.

            tic_ext=$(grep -E '^x[[:space:]]*=' progs/Makefile |sed -r -e 's/^.*=[[:space:]]*//;')

            CT_DoExecLog ALL make ${PARALLELMFLAGS} -C include

            CT_DoExecLog ALL make ${PARALLELMFLAGS} -C progs "tic${tic_ext}"

            CT_DoExecLog ALL install -d -m 0755 "${CT_PREFIX_DIR}/buildtools"

            CT_DoExecLog ALL install -m 0755 "progs/tic${tic_ext}" "${CT_PREFIX_DIR}/buildtools"

            mkdir -p "${CT_BUILD_DIR}/build-ncurses"

            cd "${CT_BUILD_DIR}/build-ncurses"

            CT_DoExecLog CFG                                                    \

            "${CT_SRC_DIR}/ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}/configure"   \

                --build=${CT_BUILD}                                             \

                --host=${CT_TARGET}                                             \

                --with-build-cc=${CT_BUILD}-gcc                                 \

                --with-build-cpp=${CT_BUILD}-gcc                                \

                --with-build-cflags="${CT_CFLAGS_FOR_HOST}"                     \

                --prefix="${CT_BUILD_DIR}/static-target"                        \

                --without-shared                                                \

                --without-sysmouse                                              \

                --without-progs                                                 \

                --enable-termcap                                                \

                "${ncurses_opts[@]}"

            CT_DoExecLog ALL make ${PARALLELMFLAGS}

            CT_DoExecLog ALL make install

            # We no longer need the temporary tic. Remove it

            CT_DoExecLog DEBUG rm -fv "${CT_PREFIX_DIR}/buildtools/tic${tic_ext}"

            native_extra_config+=("--with-curses")

            # There's no better way to tell gdb where to find -lcurses... :-(

            gdb_native_CFLAGS+=("-I${CT_BUILD_DIR}/static-target/include")

            gdb_native_CFLAGS+=("-L${CT_BUILD_DIR}/static-target/lib")

        fi # do_ncurses

        if [ "${do_expat}" = "y" ]; then

            CT_DoLog EXTRA "Building static target expat"

            mkdir -p "${CT_BUILD_DIR}/expat-build"

            cd "${CT_BUILD_DIR}/expat-build"

            CT_DoExecLog CFG                                                \

            "${CT_SRC_DIR}/expat-${CT_DEBUG_GDB_EXPAT_VERSION}/configure"   \

                --build=${CT_BUILD}                                         \

                --host=${CT_TARGET}                                         \

                --prefix="${CT_BUILD_DIR}/static-target"                    \

                --enable-static                                             \

                --disable-shared

            CT_DoExecLog ALL make ${PARALLELMFLAGS}

            CT_DoExecLog ALL make install

            native_extra_config+=("--with-expat")

            native_extra_config+=("--with-libexpat-prefix=${CT_BUILD_DIR}/static-target")

        fi # do_expat

        CT_DoLog EXTRA "Configuring native gdb"

        mkdir -p "${CT_BUILD_DIR}/build-gdb-native"

        cd "${CT_BUILD_DIR}/build-gdb-native"

        case "${CT_THREADS}" in

            none)   native_extra_config+=("--disable-threads");;

            *)      native_extra_config+=("--enable-threads");;

        esac

        if [ "${CT_GDB_NATIVE_STATIC}" = "y" ]; then

            CC_for_gdb="${CT_TARGET}-gcc -static"

            LD_for_gdb="${CT_TARGET}-ld -static"

        else

            CC_for_gdb="${CT_TARGET}-gcc"

            LD_for_gdb="${CT_TARGET}-ld"

        fi

        export ac_cv_func_strncmp_works=yes

        CT_DoLog DEBUG "Extra config passed: '${native_extra_config[*]}'"

        CC="${CC_for_gdb}"                              \

        LD="${LD_for_gdb}"                              \

        CFLAGS="${gdb_native_CFLAGS[@]}"                \

        CT_DoExecLog CFG                                \

        "${gdb_src_dir}/configure"                      \

            --build=${CT_BUILD}                         \

            --host=${CT_TARGET}                         \

            --target=${CT_TARGET}                       \

            --prefix=/usr                               \

            --with-build-sysroot="${CT_SYSROOT_DIR}"    \

            --without-uiout                             \

            --disable-tui                               \

            --disable-gdbtk                             \

            --without-x                                 \

            --disable-sim                               \

            --disable-werror                            \

            --without-included-gettext                  \

            --without-develop                           \

            "${native_extra_config[@]}"

        CT_DoLog EXTRA "Building native gdb"

        CT_DoExecLog ALL make ${PARALLELMFLAGS} CC=${CT_TARGET}-${CT_CC}

        CT_DoLog EXTRA "Installing native gdb"

        CT_DoExecLog ALL make DESTDIR="${CT_DEBUGROOT_DIR}" install

        # Building a native gdb also builds a gdbserver

        find "${CT_DEBUGROOT_DIR}" -type f -name gdbserver -exec rm -fv {} \; 2>&1 |CT_DoLog ALL

        unset ac_cv_func_strncmp_works

        # GDB on Mingw depends on PDcurses, not ncurses

        if [ "${CT_MINGW32}" != "y" ]; then

            CT_DoLog EXTRA "Cleaning up ncurses"

            cd "${CT_BUILD_DIR}/build-ncurses"

            CT_DoExecLog ALL make DESTDIR="${CT_SYSROOT_DIR}" uninstall

            CT_DoExecLog DEBUG rm -rf "${CT_BUILD_DIR}/ncurses"

        fi

        CT_EndStep # native gdb build

    fi

    if [ "${CT_GDB_GDBSERVER}" = "y" ]; then

        local -a gdbserver_extra_config

        CT_DoStep INFO "Installing gdbserver"

        CT_DoLog EXTRA "Configuring gdbserver"

        mkdir -p "${CT_BUILD_DIR}/build-gdb-gdbserver"

        cd "${CT_BUILD_DIR}/build-gdb-gdbserver"

        # Workaround for bad versions, where the configure

        # script for gdbserver is not executable...

        # Bah, GNU folks strike again... :-(

        chmod +x "${gdb_src_dir}/gdb/gdbserver/configure"

        gdbserver_LDFLAGS=

        if [ "${CT_GDB_GDBSERVER_STATIC}" = "y" ]; then

            gdbserver_LDFLAGS=-static

        fi

        gdbserver_extra_config=("${extra_config[@]}")

        LDFLAGS="${gdbserver_LDFLAGS}"                  \

        CT_DoExecLog CFG                                \

        "${gdb_src_dir}/gdb/gdbserver/configure"        \

            --build=${CT_BUILD}                         \

            --host=${CT_TARGET}                         \

            --target=${CT_TARGET}                       \

            --prefix=/usr                               \

            --sysconfdir=/etc                           \

            --localstatedir=/var                        \

            --includedir="${CT_HEADERS_DIR}"            \

            --with-build-sysroot="${CT_SYSROOT_DIR}"    \

            --program-prefix=                           \

            --without-uiout                             \

            --disable-tui                               \

            --disable-gdbtk                             \

            --without-x                                 \

            --without-included-gettext                  \

            --without-develop                           \

            --disable-werror                            \

            "${gdbserver_extra_config[@]}"

        CT_DoLog EXTRA "Building gdbserver"

        CT_DoExecLog ALL make ${PARALLELMFLAGS} CC=${CT_TARGET}-${CT_CC}

        CT_DoLog EXTRA "Installing gdbserver"

        CT_DoExecLog ALL make DESTDIR="${CT_DEBUGROOT_DIR}" install

        CT_EndStep

    fi

}