README
author "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
Fri Jan 27 13:31:16 2012 +0100 (2012-01-27)
changeset 2854 a70abdbfa342
parent 2725 32aa23619dfd
permissions -rw-r--r--
complibs/cloog: fix linking with libm

In Ubuntu 11.04 and 11.10, the default options for ld have changed.
--no-copy-dt-needed-entries and --as-needed are now enabled by default, which
causes errors like:

[EXTRA] Checking CLooG/ppl
[DEBUG] ==> Executing: 'make' '-j3' '-s' 'check'
[ALL ] Making check in .
[ALL ] config.status: creating include/cloog/cloog-config.h
[ALL ] config.status: include/cloog/cloog-config.h is unchanged
[ALL ] libtool: link: i686-build_pc-linux-gnu-gcc -Wall -fomit-frame-pointer
-pipe -o cloog cloog.o -L/<snip>/build/static/lib ./.libs/libcloog.a -lm
/<snip>/build/static/lib/libppl_c.a /<snip>/build/static/lib/libpwl.a
/<snip>/build/static/lib/libppl.a /<snip>/build/static/lib/libgmpxx.a
/<snip>/build/static/lib/libgmp.a -lstdc++
[ALL ] /usr/bin/ld: /<snip>/build/static/lib/libppl.a(MIP_Problem.o):
undefined reference to symbol 'sqrt@@GLIBC_2.0'
[ALL ] /usr/bin/ld: note: 'sqrt@@GLIBC_2.0' is defined in DSO
/usr/lib/gcc/i686-linux-gnu/4.6.1/../../../i386-linux-gnu/libm.so so try adding
it to the linker command line
[ALL ] /usr/lib/gcc/i686-linux-gnu/4.6.1/../../../i386-linux-gnu/libm.so:
could not read symbols: Invalid operation
[ALL ] collect2: ld returned 1 exit status
[ERROR] make[2]: *** [cloog] Error 1
[ERROR] make[1]: *** [check-recursive] Error 1

See:
https://wiki.ubuntu.com/NattyNarwhal/ToolchainTransition

This patch fixes these errors by placing '-lm' at the right place on the command
line as libppl requires libm when linking cloog.

Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
yann@1
     1
This is the README for crosstool-NG
yann@1
     2
yann@2091
     3
Crosstool-NG follows the autoconf dance. So, to get you
yann@2091
     4
kick-started, just run:
yann@2834
     5
    ./configure --help
yann@2834
     6
yann@2834
     7
If you are using a development snapshot, you'll have to
yann@2834
     8
create the configure script, first. Just run:
yann@2834
     9
    ./bootstrap
yann@1
    10
yann@2091
    11
You will find the documentation in the directory 'docs'.
yann@2091
    12
Here is a quick overview of what you'll find there:
yann@2091
    13
  0 - Table of content
yann@2091
    14
  1 - Introduction
yann@2091
    15
  2 - Installing crosstool-NG
yann@2091
    16
  3 - Configuring a toolchain
yann@2091
    17
  4 - Building the toolchain
yann@2091
    18
  5 - Using the toolchain
yann@2091
    19
  6 - Toolchain types
yann@2091
    20
  7 - Contributing
yann@2091
    21
  8 - Internals
yann@2091
    22
  A - Credits
yann@2091
    23
  B - Known issues
yann@2091
    24
  C - Misc. tutorials
yann@1
    25
yann@1575
    26
You can also point your browser at:
yann@2725
    27
  http://crosstool-ng.org/
yann@96
    28
yann@185
    29
Aloha!