# This file adds functions to build glibc

# Copyright 2007 Yann E. MORIN

# Licensed under the GPL v2. See COPYING in the root of this package

do_print_filename() {

    [ "${CT_LIBC}" = "glibc" ] || return 0

    echo "glibc-${CT_LIBC_VERSION}"

    for addon in $(do_libc_add_ons_list " "); do

        # NPTL addon is not to be downloaded, in any case

        [ "${addon}" = "nptl" ] && continue || true

        echo "glibc-${addon}-${CT_LIBC_VERSION}"

    done

}

# Download glibc

do_libc_get() {

    # Ah! Not all GNU folks seem stupid. All glibc releases are in the same

    # directory. Good. Alas, there is no snapshot there. I'll deal with them

    # later on... :-/

    CT_GetFile "${CT_LIBC_FILE}"                        \

               {ftp,http}://ftp.gnu.org/gnu/glibc       \

               ftp://gcc.gnu.org/pub/glibc/releases     \

               ftp://gcc.gnu.org/pub/glibc/snapshots

    # C library addons

    for addon in $(do_libc_add_ons_list " "); do

        # NPTL addon is not to be downloaded, in any case

        [ "${addon}" = "nptl" ] && continue || true

        CT_GetFile "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}" \

                   {ftp,http}://ftp.gnu.org/gnu/glibc       \

                   ftp://gcc.gnu.org/pub/glibc/releases     \

                   ftp://gcc.gnu.org/pub/glibc/snapshots

    done

    return 0

}

# Extract glibc

do_libc_extract() {

    CT_ExtractAndPatch "${CT_LIBC_FILE}"

    # C library addons

    for addon in $(do_libc_add_ons_list " "); do

        # NPTL addon is not to be extracted, in any case

        [ "${addon}" = "nptl" ] && continue || true

        CT_ExtractAndPatch "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"

    done

    return 0

}

# There is nothing to do for glibc check config

do_libc_check_config() {

    :

}

# This function installs the glibc headers needed to build the core compiler

do_libc_headers() {

    # Only need to install bootstrap glibc headers for gcc-3.0 and above?  Or maybe just gcc-3.3 and above?

    # See also http://gcc.gnu.org/PR8180, which complains about the need for this step.

    grep -q 'gcc-[34]' "${CT_SRC_DIR}/${CT_CC_FILE}/ChangeLog" 2>/dev/null || return 0

    CT_DoStep INFO "Installing C library headers"

    mkdir -p "${CT_BUILD_DIR}/build-libc-headers"

    cd "${CT_BUILD_DIR}/build-libc-headers"

    CT_DoLog EXTRA "Configuring C library"

    # The following three things have to be done to build glibc-2.3.x, but they don't hurt older versions.

    # 1. override CC to keep glibc's configure from using $TARGET-gcc. 

    # 2. disable linuxthreads, which needs a real cross-compiler to generate tcb-offsets.h properly

    # 3. build with gcc 3.2 or later

    # Compare these options with the ones used when building glibc for real below - they're different.

    # As of glibc-2.3.2, to get this step to work for hppa-linux, you need --enable-hacker-mode

    # so when configure checks to make sure gcc has access to the assembler you just built...

    # Alternately, we could put ${PREFIX}/${TARGET}/bin on the path.

    # Set --build so maybe we don't have to specify "cross-compiling=yes" below (haven't tried yet)

    # Note: the warning

    # "*** WARNING: Are you sure you do not want to use the `linuxthreads'"

    # *** add-on?"

    # is ok here, since all we want are the basic headers at this point.

    # Override libc_cv_ppc_machine so glibc-cvs doesn't complain

    # 'a version of binutils that supports .machine "altivec" is needed'.

    addons_config="--enable-add-ons=$(do_libc_add_ons_list ,)"

    # We need to remove any threading addon when installing headers

    addons_config="${addons_config//nptl/}"

    addons_config="${addons_config//linuxthreads/}"

    addons_config=$(echo "${addons_config}" |sed -r -e 's/^,+//; s/,+$//; s/,+/,/g;')

    extra_config="${addons_config}"

    min_kernel_config=

    case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

        *enable-kernel*) ;;

        *)  if [    "${CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS}" = "y" \

                 -o "${CT_LIBC_GLIBC_USE_HEADERS_MIN_KERNEL}" = "y"    ]; then

                min_kernel_config="--enable-kernel=$(echo ${CT_LIBC_GLIBC_MIN_KERNEL} |sed -r -e 's/^([^.]+\.[^.]+\.[^.]+)(|\.[^.]+)$/\1/;')"

            fi

            ;;

    esac

    extra_config="${extra_config} ${min_kernel_config}"

    cross_cc=$(CT_Which "${CT_TARGET}-gcc")

    CT_DoLog DEBUG "Using gcc for target: '${cross_cc}'"

    CT_DoLog DEBUG "Extra config passed : '${extra_config}'"

    libc_cv_ppc_machine=yes                     \

    CC=${cross_cc}                              \

    CT_DoExecLog ALL                            \

    "${CT_SRC_DIR}/${CT_LIBC_FILE}/configure"   \

        --build="${CT_UNIQ_BUILD}"              \

        --host="${CT_TARGET}"                   \

        --prefix=/usr                           \

        --with-headers="${CT_HEADERS_DIR}"      \

        --without-cvs                           \

        --disable-sanity-checks                 \

        --enable-hacker-mode                    \

        ${extra_config}                         \

        --without-nptl

    CT_DoLog EXTRA "Installing C library headers"

    if grep -q GLIBC_2.3 "${CT_SRC_DIR}/${CT_LIBC_FILE}/ChangeLog"; then

        # glibc-2.3.x passes cross options to $(CC) when generating errlist-compat.c,

        # which fails without a real cross-compiler.

        # Fortunately, we don't need errlist-compat.c, since we just need .h

        # files, so work around this by creating a fake errlist-compat.c and

        # satisfying its dependencies.

        # Another workaround might be to tell configure to not use any cross

        # options to $(CC).

        # The real fix would be to get install-headers to not generate

        # errlist-compat.c.

        # Note: BOOTSTRAP_GCC is used by:

        # patches/glibc-2.3.5/glibc-mips-bootstrap-gcc-header-install.patch

        libc_cv_ppc_machine=yes                         \

        CT_DoExecLog ALL                                \

        make CFLAGS="-O -DBOOTSTRAP_GCC"                \

             OBJDUMP_FOR_HOST="${CT_TARGET}-objdump"    \

             sysdeps/gnu/errlist.c

        mkdir -p stdio-common

        # sleep for 2 seconds for benefit of filesystems with lousy time

        # resolution, like FAT, so make knows for sure errlist-compat.c doesn't

        # need generating

        sleep 2

        CT_DoExecLog ALL touch stdio-common/errlist-compat.c

    fi

    # Note: BOOTSTRAP_GCC (see above)

    libc_cv_ppc_machine=yes                         \

    CT_DoExecLog ALL                                \

    make cross-compiling=yes                        \

         install_root=${CT_SYSROOT_DIR}             \

         CFLAGS="-O -DBOOTSTRAP_GCC"                \

         ${LIBC_SYSROOT_ARG}                        \

         OBJDUMP_FOR_HOST="${CT_TARGET}-objdump"    \

         install-headers

    # Two headers -- stubs.h and features.h -- aren't installed by install-headers,

    # so do them by hand.  We can tolerate an empty stubs.h for the moment.

    # See e.g. http://gcc.gnu.org/ml/gcc/2002-01/msg00900.html

    mkdir -p "${CT_HEADERS_DIR}/gnu"

    CT_DoExecLog ALL touch "${CT_HEADERS_DIR}/gnu/stubs.h"

    CT_DoExecLog ALL cp -v "${CT_SRC_DIR}/${CT_LIBC_FILE}/include/features.h"  \

                           "${CT_HEADERS_DIR}/features.h"

    # Building the bootstrap gcc requires either setting inhibit_libc, or

    # having a copy of stdio_lim.h... see

    # http://sources.redhat.com/ml/libc-alpha/2003-11/msg00045.html

    CT_DoExecLog ALL cp -v bits/stdio_lim.h "${CT_HEADERS_DIR}/bits/stdio_lim.h"

    # Following error building gcc-4.0.0's gcj:

    #  error: bits/syscall.h: No such file or directory

    # solved by following copy; see http://sourceware.org/ml/crossgcc/2005-05/msg00168.html

    # but it breaks arm, see http://sourceware.org/ml/crossgcc/2006-01/msg00091.html

    [ "${CT_ARCH}" != "arm" ] && CT_DoExecLog ALL cp -v misc/syscall-list.h "${CT_HEADERS_DIR}/bits/syscall.h" || true

    # Those headers are to be manually copied so gcc can build properly

    pthread_h="${CT_SRC_DIR}/${CT_LIBC_FILE}/${CT_THREADS}/sysdeps/pthread/pthread.h"

    pthreadtypes_h=

    case "${CT_THREADS}" in

        nptl)

            # NOTE: for some archs, the pathes are different, but they are not

            # supported by crosstool-NG right now. See original crosstool when they are.

            pthread_h="${CT_SRC_DIR}/${CT_LIBC_FILE}/${CT_THREADS}/sysdeps/pthread/pthread.h"

            pthreadtypes_h="${CT_SRC_DIR}/${CT_LIBC_FILE}/nptl/sysdeps/unix/sysv/linux/${CT_KERNEL_ARCH}/bits/pthreadtypes.h"

            if [ ! -f "${pthreadtypes_h}" ]; then

                pthreadtypes_h="${CT_SRC_DIR}/${CT_LIBC_FILE}/${CT_LIBC}-ports-${CT_LIBC_VERSION}/sysdeps/unix/sysv/linux/${CT_KERNEL_ARCH}/nptl/bits/pthreadtypes.h"

            fi

            ;;

        linuxthreads)

            pthreadtypes_h="${CT_SRC_DIR}/${CT_LIBC_FILE}/linuxthreads/sysdeps/pthread/bits/pthreadtypes.h"

            ;;

        *)

            pthread_h=

            pthreadtypes_h=

            ;;

    esac

    if [ -n "${pthread_h}" ]; then

        CT_DoExecLog ALL cp -v "${pthread_h}" "${CT_HEADERS_DIR}/pthread.h"

    fi

    if [ -n "${pthreadtypes_h}" ]; then

        CT_DoExecLog ALL cp -v "${pthreadtypes_h}" "${CT_HEADERS_DIR}/bits/pthreadtypes.h"

    fi

    CT_EndStep

}

# Build and install start files

do_libc_start_files() {

    # Needed only in the NPTL case. Otherwise, return.

    [ "${CT_THREADS}" = "nptl" ] || return 0

    CT_DoStep INFO "Installing C library start files"

    mkdir -p "${CT_BUILD_DIR}/build-libc-startfiles"

    cd "${CT_BUILD_DIR}/build-libc-startfiles"

    CT_DoLog EXTRA "Configuring C library"

    # Add some default glibc config options if not given by user.

    extra_config=

    min_kernel_config=

    case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

        *enable-kernel*) ;;

        *)  if [    "${CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS}" = "y" \

                 -o "${CT_LIBC_GLIBC_USE_HEADERS_MIN_KERNEL}" = "y"    ]; then

                min_kernel_config="--enable-kernel=$(echo ${CT_LIBC_GLIBC_MIN_KERNEL} |sed -r -e 's/^([^.]+\.[^.]+\.[^.]+)(|\.[^.]+)$/\1/;')"

            fi

            ;;

    esac

    extra_config="${extra_config} ${min_kernel_config}"

    case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

        *-tls*) ;;

        *) extra_config="${extra_config} --with-tls"

    esac

    case "${CT_SHARED_LIBS}" in

        y) extra_config="${extra_config} --enable-shared";;

        *) extra_config="${extra_config} --disable-shared";;

    esac

    case "${CT_ARCH_FLOAT_HW},${CT_ARCH_FLOAT_SW}" in

        y,) extra_config="${extra_config} --with-fp";;

        ,y) extra_config="${extra_config} --without-fp";;

    esac

    # Obviously, we want threads, as we come here only for NPTL

    extra_config="${extra_config} --with-__thread"

    addons_config="--enable-add-ons=$(do_libc_add_ons_list ,)"

    extra_config="${extra_config} ${addons_config}"

    # Add some default CC args

    glibc_version_major=$(echo ${CT_LIBC_VERSION} |sed -r -e 's/^([^\.]+)\..*/\1/')

    glibc_version_minor=$(echo ${CT_LIBC_VERSION} |sed -r -e 's/^[^\.]+\.([^.]+).*/\1/')

    # In case we're using a snapshot, fake a >=2.6 version.

    if [    "${CT_LIBC_V_LATEST}" = "y" \

         -o "${CT_LIBC_V_date}" = "y"   ]; then

        glibc_version_major=3

        glibc_version_minor=0

    fi

    if [    ${glibc_version_major} -eq 2 -a ${glibc_version_minor} -ge 6    \

         -o ${glibc_version_major} -gt 2                                    ]; then

        # Don't use -pipe: configure chokes on it for glibc >= 2.6.

        CT_Test 'Removing "-pipe" for use with glibc>=2.6' "${CT_USE_PIPES}" = "y"

        extra_cc_args="${CT_CFLAGS_FOR_HOST/-pipe}"

    else

        extra_cc_args="${CT_CFLAGS_FOR_HOST}"

    fi

    extra_cc_args="${extra_cc_args} ${CT_ARCH_ENDIAN_OPT}"

    cross_cc=$(CT_Which "${CT_TARGET}-gcc")

    CT_DoLog DEBUG "Using gcc for target    : '${cross_cc}'"

    CT_DoLog DEBUG "Configuring with addons : '$(do_libc_add_ons_list ,)'"

    CT_DoLog DEBUG "Extra config args passed: '${extra_config}'"

    CT_DoLog DEBUG "Extra CC args passed    : '${extra_cc_args}'"

    # Super-H really needs to set configparms as of gcc-3.4/glibc-2.3.2

    # note: this is awkward, doesn't work well if you need more than one

    # line in configparms

    echo ${CT_LIBC_GLIBC_CONFIGPARMS} > configparms

    echo "libc_cv_forced_unwind=yes" > config.cache

    echo "libc_cv_c_cleanup=yes" >> config.cache

    # Please see the comment for the configure step in do_libc().

    BUILD_CC=${CT_CC_NATIVE}                                        \

    CFLAGS="${CT_TARGET_CFLAGS} ${CT_LIBC_GLIBC_EXTRA_CFLAGS} -O "  \

    CC="${cross_cc} ${CT_LIBC_EXTRA_CC_ARGS} ${extra_cc_args}"      \

    AR=${CT_TARGET}-ar                                              \

    RANLIB=${CT_TARGET}-ranlib                                      \

    CT_DoExecLog ALL                                                \

    "${CT_SRC_DIR}/${CT_LIBC_FILE}/configure"                       \

        --prefix=/usr                                               \

        --build="${CT_UNIQ_BUILD}"                                  \

        --host=${CT_TARGET}                                         \

        --without-cvs                                               \

        --disable-profile                                           \

        --disable-debug                                             \

        --without-gd                                                \

        --with-headers="${CT_HEADERS_DIR}"                          \

        --cache-file=config.cache                                   \

        ${extra_config}                                             \

        ${CT_LIBC_GLIBC_EXTRA_CONFIG}

    #TODO: should check whether slibdir has been set in configparms to */lib64

    #      and copy the startfiles into the appropriate libdir.

    CT_DoLog EXTRA "Building C library start files"

    CT_DoExecLog ALL make OBJDUMP_FOR_HOST="${CT_TARGET}-objdump" csu/subdir_lib

    CT_DoLog EXTRA "Installing C library start files"

    if [ "${CT_USE_SYSROOT}" = "y" ]; then

        CT_DoExecLog ALL cp -fpv csu/crt[1in].o "${CT_SYSROOT_DIR}/usr/lib/"

    else

        CT_DoExecLog ALL cp -fpv csu/crt[1in].o "${CT_SYSROOT_DIR}/lib/"

    fi

    CT_EndStep

}

# This function builds and install the full glibc

do_libc() {

    CT_DoStep INFO "Installing C library"

    mkdir -p "${CT_BUILD_DIR}/build-libc"

    cd "${CT_BUILD_DIR}/build-libc"

    CT_DoLog EXTRA "Configuring C library"

    # Add some default glibc config options if not given by user.

    # We don't need to be conditional on wether the user did set different

    # values, as they CT_LIBC_GLIBC_EXTRA_CONFIG is passed after extra_config

    extra_config=

    min_kernel_config=""

    case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

        *enable-kernel*) ;;

        *)  if [    "${CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS}" = "y" \

                 -o "${CT_LIBC_GLIBC_USE_HEADERS_MIN_KERNEL}" = "y"    ]; then

                min_kernel_config="--enable-kernel=$(echo ${CT_LIBC_GLIBC_MIN_KERNEL} |sed -r -e 's/^([^.]+\.[^.]+\.[^.]+)(|\.[^.]+)$/\1/;')"

            fi

            ;;

    esac

    extra_config="${extra_config} ${min_kernel_config}"

    case "${CT_THREADS}" in

        nptl)           extra_config="${extra_config} --with-__thread --with-tls";;

        linuxthreads)   extra_config="${extra_config} --with-__thread --without-tls --without-nptl";;

        none)           extra_config="${extra_config} --without-__thread --without-nptl"

                        case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

                            *-tls*) ;;

                            *) extra_config="${extra_config} --without-tls";;

                        esac

                        ;;

    esac

    case "${CT_SHARED_LIBS}" in

        y) extra_config="${extra_config} --enable-shared";;

        *) extra_config="${extra_config} --disable-shared";;

    esac

    case "${CT_ARCH_FLOAT_HW},${CT_ARCH_FLOAT_SW}" in

        y,) extra_config="${extra_config} --with-fp";;

        ,y) extra_config="${extra_config} --without-fp";;

    esac

    case "$(do_libc_add_ons_list ,)" in

        "") ;;

        *)  extra_config="${extra_config} --enable-add-ons=$(do_libc_add_ons_list ,)";;

    esac

    # Add some default CC args

    glibc_version_major=$(echo ${CT_LIBC_VERSION} |sed -r -e 's/^([^\.]+)\..*/\1/')

    glibc_version_minor=$(echo ${CT_LIBC_VERSION} |sed -r -e 's/^[^\.]+\.([^.]+).*/\1/')

    # In case we're using a snapshot, fake a >=2.6 version.

    if [    "${CT_LIBC_V_LATEST}" = "y" \

         -o "${CT_LIBC_V_date}" = "y"   ]; then

        glibc_version_major=3

        glibc_version_minor=0

    fi

    if [    ${glibc_version_major} -eq 2 -a ${glibc_version_minor} -ge 6    \

         -o ${glibc_version_major} -gt 2                                    ]; then

        # Don't use -pipe: configure chokes on it for glibc >= 2.6.

        CT_Test 'Removing "-pipe" for use with glibc>=2.6' "${CT_USE_PIPES}" = "y"

        extra_cc_args="${CT_CFLAGS_FOR_HOST/-pipe}"

    else

        extra_cc_args="${CT_CFLAGS_FOR_HOST}"

    fi

    extra_cc_args="${extra_cc_args} ${CT_ARCH_ENDIAN_OPT}"

    cross_cc=$(CT_Which "${CT_TARGET}-gcc")

    CT_DoLog DEBUG "Using gcc for target    : '${cross_cc}'"

    CT_DoLog DEBUG "Configuring with addons : '$(do_libc_add_ons_list ,)'"

    CT_DoLog DEBUG "Extra config args passed: '${extra_config}'"

    CT_DoLog DEBUG "Extra CC args passed    : '${extra_cc_args}'"

    # sh3 and sh4 really need to set configparms as of gcc-3.4/glibc-2.3.2

    # note: this is awkward, doesn't work well if you need more than one line in configparms

    echo ${CT_LIBC_GLIBC_CONFIGPARMS} > configparms

    # For glibc 2.3.4 and later we need to set some autoconf cache

    # variables, because nptl/sysdeps/pthread/configure.in does not

    # work when cross-compiling.

    if [ "${CT_THREADS}" = "nptl" ]; then

        echo libc_cv_forced_unwind=yes

        echo libc_cv_c_cleanup=yes

    fi >config.cache

    # Configure with --prefix the way we want it on the target...

    # There are a whole lot of settings here.  You'll probably want

    # to read up on what they all mean, and customize a bit, possibly by setting GLIBC_EXTRA_CONFIG

    # Compare these options with the ones used when installing the glibc headers above - they're different.

    # Adding "--without-gd" option to avoid error "memusagestat.c:36:16: gd.h: No such file or directory" 

    # See also http://sources.redhat.com/ml/libc-alpha/2000-07/msg00024.html. 

    # Set BUILD_CC, or you won't be able to build datafiles

    # Set --build, else glibc-2.3.2 will think you're not cross-compiling, and try to run the test programs

    # OK. I'm fed up with those folks telling me what I should do.

    # I don't configure nptl? Well, maybe that's purposedly because

    # I don't want nptl! --disable-sanity-checks will shut up those

    # silly messages. GNU folks again, he?

    BUILD_CC=${CT_CC_NATIVE}                                        \

    CFLAGS="${CT_TARGET_CFLAGS} ${CT_LIBC_GLIBC_EXTRA_CFLAGS} -O"   \

    CC="${CT_TARGET}-gcc ${CT_LIBC_EXTRA_CC_ARGS} ${extra_cc_args}" \

    AR=${CT_TARGET}-ar                                              \

    RANLIB=${CT_TARGET}-ranlib                                      \

    CT_DoExecLog ALL                                                \

    "${CT_SRC_DIR}/${CT_LIBC_FILE}/configure"                       \

        --prefix=/usr                                               \

        --build=${CT_UNIQ_BUILD}                                    \

        --host=${CT_TARGET}                                         \

        --without-cvs                                               \

        --disable-profile                                           \

        --disable-debug                                             \

        --without-gd                                                \

        --disable-sanity-checks                                     \

        --cache-file=config.cache                                   \

        --with-headers="${CT_HEADERS_DIR}"                          \

        ${extra_config}                                             \

        ${CT_LIBC_GLIBC_EXTRA_CONFIG}

    if grep -l '^install-lib-all:' "${CT_SRC_DIR}/${CT_LIBC_FILE}/Makerules" > /dev/null; then

        # nptl-era glibc.

        # If the install-lib-all target (which is added by our make-install-lib-all.patch)

        # is present, it means we're building glibc-2.3.3 or later, and we can't

        # build programs yet, as they require libeh, which won't be installed

        # until full build of gcc

        # YEM-FIXME: This comment is misleading: latest glibc-s do not have the

        #            make-install-lib-all.patch applied, so do not pass through this

        #            part of the if statement; nonetheless, they do build, and

        #            the result is useable (maybe the dual-pass core gcc is

        #            responsible for this).

        GLIBC_INITIAL_BUILD_RULE=lib

        GLIBC_INITIAL_INSTALL_RULE="install-lib-all install-headers"

        GLIBC_INSTALL_APPS_LATER=yes

    else

        # classic glibc.  

        # We can build and install everything with the bootstrap compiler.

        # YEM-FIXME: See the above FIXME as well.

        GLIBC_INITIAL_BUILD_RULE=all

        GLIBC_INITIAL_INSTALL_RULE=install

        GLIBC_INSTALL_APPS_LATER=no

    fi

    # If this fails with an error like this:

    # ...  linux/autoconf.h: No such file or directory 

    # then you need to set the KERNELCONFIG variable to point to a .config file for this arch.

    # The following architectures are known to need kernel .config: alpha, arm, ia64, s390, sh, sparc

    # Note: LD and RANLIB needed by glibc-2.1.3's c_stub directory, at least on macosx

    # No need for PARALLELMFLAGS here, Makefile already reads this environment variable

    CT_DoLog EXTRA "Building C library"

    CT_DoExecLog ALL make LD=${CT_TARGET}-ld                        \

                           RANLIB=${CT_TARGET}-ranlib               \

                           OBJDUMP_FOR_HOST="${CT_TARGET}-objdump"  \

                           ${GLIBC_INITIAL_BUILD_RULE}

    CT_DoLog EXTRA "Installing C library"

    CT_DoExecLog ALL make install_root="${CT_SYSROOT_DIR}"          \

                          ${LIBC_SYSROOT_ARG}                       \

                          OBJDUMP_FOR_HOST="${CT_TARGET}-objdump"   \

                          ${GLIBC_INITIAL_INSTALL_RULE}

    # This doesn't seem to work when building a crosscompiler,

    # as it tries to execute localedef using the just-built ld.so!?

    #CT_DoLog EXTRA "Installing locales"

    #make localedata/install-locales install_root=${SYSROOT} 2>&1 |CT_DoLog ALL

    # Fix problems in linker scripts.

    #

    # 1. Remove absolute paths

    # Any file in a list of known suspects that isn't a symlink is assumed to be a linker script.

    # FIXME: test -h is not portable

    # FIXME: probably need to check more files than just these three...

    # Need to use sed instead of just assuming we know what's in libc.so because otherwise alpha breaks

    #

    # 2. Remove lines containing BUG per http://sources.redhat.com/ml/bug-glibc/2003-05/msg00055.html,

    # needed to fix gcc-3.2.3/glibc-2.3.2 targeting arm

    #

    # To make "strip *.so.*" not fail (ptxdist does this), rename to .so_orig rather than .so.orig

    CT_DoLog EXTRA "Fixing C library linker scripts"

    for file in libc.so libpthread.so libgcc_s.so; do

        for dir in lib lib64 usr/lib usr/lib64; do

            if [ -f "${CT_SYSROOT_DIR}/${dir}/${file}" -a ! -L ${CT_SYSROOT_DIR}/$lib/$file ]; then

                CT_DoExecLog ALL cp -v "${CT_SYSROOT_DIR}/${dir}/${file}" "${CT_SYSROOT_DIR}/${dir}/${file}_orig"

                CT_DoLog DEBUG "Fixing '${CT_SYS_ROOT_DIR}/${dir}/${file}'"

                CT_DoExecLog ALL sed -i -r -e 's,/usr/lib/,,g;

                                               s,/usr/lib64/,,g;

                                               s,/lib/,,g;

                                               s,/lib64/,,g;

                                               /BUG in libc.scripts.output-format.sed/d' "${CT_SYSROOT_DIR}/${dir}/${file}"

            fi

        done

    done

    CT_EndStep

}

# This function finishes the glibc install

do_libc_finish() {

    # Finally, build and install glibc programs, now that libeh (if any) is installed

    # Don't do this unless needed, 'cause it causes glibc-2.{1.3,2.2} to fail here with

    # .../gcc-3.4.1-glibc-2.1.3/build-glibc/libc.so.6: undefined reference to `__deregister_frame_info'

    # .../gcc-3.4.1-glibc-2.1.3/build-glibc/libc.so.6: undefined reference to `__register_frame_info'

    [ "${GLIBC_INSTALL_APPS_LATER}" = "yes" ] || return 0

    CT_DoStep INFO "Finishing C library"

    cd "${CT_BUILD_DIR}/build-libc"

    CT_DoLog EXTRA "Re-building C library"

    CT_DoExecLog ALL make LD=${CT_TARGET}-ld RANLIB=${CT_TARGET}-ranlib

    CT_DoLog EXTRA "Installing missing C library components"

    # note: should do full install and then fix linker scripts, but this is faster

    for t in bin rootsbin sbin data others; do

        CT_DoExecLog ALL make install_root="${CT_SYSROOT_DIR}"          \

                              ${LIBC_SYSROOT_ARG}                       \

                              OBJDUMP_FOR_HOST="${CT_TARGET}-objdump"   \

                              install-${t}

    done

    CT_EndStep

}

# Build up the addons list, separated with $1

do_libc_add_ons_list() {

    local sep="$1"

    local addons_list=$(echo "${CT_LIBC_ADDONS_LIST//,/${sep}}" |tr -s ,)

    case "${CT_THREADS}" in

        none)   ;;

        *)      addons_list="${addons_list}${sep}${CT_THREADS}";;

    esac

    [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && addons_list="${addons_list}${sep}ports"

    addons_list="${addons_list%%${sep}}"

    echo "${addons_list##${sep}}"

}