1.1 --- a/docs/overview.txt Tue Jul 17 21:44:33 2007 +0000
1.2 +++ b/docs/overview.txt Sun Jul 22 13:27:04 2007 +0000
1.3 @@ -90,8 +90,14 @@
1.4 Configuring crosstool-NG /
1.5 _________________________/
1.6
1.7 -crosstool-NG is configured the same way you configure your Linux kernel: by
1.8 -using a curses-based menu. It is assumed you now how to handle this.
1.9 +crosstool-NG is configured by a configurator presenting a menu-stuctured set of
1.10 +options. These options let you specify the way you want your toolchain built,
1.11 +where you want it installed, what architecture and specific processor it
1.12 +will support, the version of the components you want to use, etc... The
1.13 +value for those options are then stored in a configuration file.
1.14 +
1.15 +The configurator works the same way you configure your Linux kernel.It is
1.16 +assumed you now how to handle this.
1.17
1.18 To enter the menu, type:
1.19 ct-ng menuconfig
1.20 @@ -126,13 +132,15 @@
1.21 ---------------------------*
1.22
1.23 CT_LOCAL_TARBALLS_DIR:
1.24 - If you already have sone tarballs in a direcotry, enter it here. That will
1.25 + If you already have some tarballs in a direcotry, enter it here. That will
1.26 speed up the retrieving phase, where crosstool-NG would otherwise download
1.27 those tarballs.
1.28
1.29 CT_PREFIX_DIR:
1.30 This is where the toolchain will be installed in (and for now, where it
1.31 - will run from).
1.32 + will run from). Common use it to add the target triplet in the directory
1.33 + path, such as (see above):
1.34 + /opt/x-tools/${CT_TARGET}
1.35
1.36 CT_TARGET_VENDOR:
1.37 An identifier for your toolchain, will take place in the vendor part of the
1.38 @@ -186,12 +194,6 @@
1.39 Running crosstool-NG /
1.40 _____________________/
1.41
1.42 -crosstool-NG is configured by a configurator presenting a menu-stuctured set of
1.43 -options. These options let you specify the way you want your toolchain built,
1.44 -where you want it installed, what architecture and specific processor it
1.45 -will support, the version of the components you want to use, etc... The
1.46 -value for those options are then stored in a configuration file.
1.47 -
1.48 To build the toolchain, simply type:
1.49 ct-ng build
1.50