# Makefile.in for building crosstool-NG

 # This file serves as source for the ./configure operation

 # This series of test is here because GNU make 3.81 will *not* use MAKEFLAGS

 # to set additional flags in the current Makfile ( see:

 # http://savannah.gnu.org/bugs/?20501 ), although the make manual says it

 # should ( see: http://www.gnu.org/software/make/manual/make.html#Options_002fRecursion )

 # so we have to work it around by calling ourselves back if needed

 # So why do we need not to use the built rules and variables? Because we

 # need to generate scripts/crosstool-NG.sh from scripts/crosstool-NG.sh.in

 # and there is a built-in implicit rule '%.sh:' that has neither a pre-requisite

 # nor a command associated, and that built-in implicit rule takes precedence

 # over our non-built-in implicit rule '%: %.in', below.

 # CT_MAKEFLAGS will be used later, below...

 # Do not print directories as we descend into them

 ifeq ($(filter --no-print-directory,$(MAKEFLAGS)),)

 CT_MAKEFLAGS += --no-print-directory

 endif

 # Use neither builtin rules, nor builtin variables

 # Note: dual test, because if -R and -r are given on the command line

 # (who knows?), MAKEFLAGS contains 'Rr' instead of '-Rr', while adding

 # '-Rr' to MAKEFLAGS adds it literaly ( and does not add 'Rr' )

 ifeq ($(filter Rr,$(MAKEFLAGS)),)

 ifeq ($(filter -Rr,$(MAKEFLAGS)),)

 CT_MAKEFLAGS += -Rr

 endif # No -Rr

 endif # No Rr

 # Remove any suffix rules

 .SUFFIXES:

 all: Makefile build

 ###############################################################################

 # Configuration variables

 VERSION:= @@VERSION@@

 BINDIR := @@BINDIR@@

 LIBDIR := @@LIBDIR@@

 DOCDIR := @@DOCDIR@@

 MANDIR := @@MANDIR@@

 DATE   := @@DATE@@

 LOCAL  := @@LOCAL@@

 # Paths found by ./configure

 install:= @@install@@

 bash   := @@bash@@

 grep   := @@grep@@

 make   := @@make@@

 sed    := @@sed@@

 libtool:= @@libtool@@

 objcopy:= @@objcopy@@

 objdump:= @@objdump@@

 readelf:= @@readelf@@

 patch  := @@patch@@

 ###############################################################################

 # Non-configure variables

 MAN_SECTION := 1

 MAN_SUBDIR := /man$(MAN_SECTION)

 ###############################################################################

 # Sanity checks

 # Check if Makefile is up to date:

 Makefile: Makefile.in

 	@echo "$< did changed: you must re-run './configure'"

 	@false

 # If installing with DESTDIR, check it's an absolute path

 ifneq ($(strip $(DESTDIR)),)

   ifneq ($(DESTDIR),$(abspath /$(DESTDIR)))

     $(error DESTDIR is not an absolute PATH: '$(DESTDIR)')

   endif

 endif

 ###############################################################################

 # Global make rules

 # If any extra MAKEFLAGS were added, re-run ourselves

 # See top of file for an explanation of why this is needed...

 ifneq ($(strip $(CT_MAKEFLAGS)),)

 MAKEFLAGS += $(CT_MAKEFLAGS)

 build install clean distclean uninstall:

 	@$(MAKE) $@

 else

 # There were no additional MAKEFLAGS to add, do the job

 TARGETS := bin lib doc man

 build: $(patsubst %,build-%,$(TARGETS))

 install: build real-install

 clean: $(patsubst %,clean-%,$(TARGETS))

 distclean: clean

 	@echo "  RM     'Makefile'"

 	@rm -f Makefile

 uninstall: real-uninstall

 ###############################################################################

 # Specific make rules

 #--------------------------------------

 # Build rules

 build-bin: ct-ng scripts/crosstool-NG.sh scripts/saveSample.sh scripts/showTuple.sh

 	@chmod 755 $^

 build-lib: paths.mk

 build-doc:

 build-man: docs/ct-ng.1.gz

 docs/ct-ng.1.gz: docs/ct-ng.1

 	@echo "  GZIP   '$@'"

 	@gzip -c9 $< >$@

 %: %.in Makefile

 	@echo "  SED    '$@'"

 	@$(sed) -r -e 's,@@CT_BINDIR@@,$(BINDIR),g;'    \

 	           -e 's,@@CT_LIBDIR@@,$(LIBDIR),g;'    \

 	           -e 's,@@CT_DOCDIR@@,$(DOCDIR),g;'    \

 	           -e 's,@@CT_MANDIR@@,$(MANDIR),g;'    \

 	           -e 's,@@CT_VERSION@@,$(VERSION),g;'	\

 	           -e 's,@@CT_DATE@@,$(DATE),g;'        \

 	           -e 's,@@CT_make@@,$(make),g;'        \

 	           -e 's,@@CT_bash@@,$(bash),g;'        \

 	           $@.in >$@

 # We create a script fragment that is parseable from inside a Makefile,

 # but also from inside a shell script, hence the reason why we don't

 # use := to set variables, although that will incur a (very small)

 # penalty from the Makefile that includes it (due to re-evaluation at

 # each call).

 paths.mk:

 	@echo "  GEN    '$@'"

 	@(echo "export install=$(install)"; \

 	  echo "export bash=$(bash)";       \

 	  echo "export grep=$(grep)";       \

 	  echo "export make=$(make)";       \

 	  echo "export sed=$(sed)";         \

 	  echo "export libtool=$(libtool)"; \

 	  echo "export objcopy=$(objcopy)"; \

 	  echo "export objdump=$(objdump)"; \

 	  echo "export readelf=$(readelf)"; \

 	  echo "export patch=$(patch)";     \

 	 ) >paths.mk

 #--------------------------------------

 # Clean rules

 clean-bin:

 	@echo "  RM     'ct-ng'"

 	@rm -f ct-ng

 	@echo "  RM     'scripts/crosstool-NG.sh'"

 	@rm -f scripts/crosstool-NG.sh

 	@echo "  RM     'scripts/saveSample.sh'"

 	@rm -f scripts/saveSample.sh

 	@echo "  RM     'scripts/showTuple.sh'"

 	@rm -f scripts/showTuple.sh

 clean-lib:

 	@echo "  RM     'paths.mk'"

 	@rm -f paths.mk

 clean-doc:

 clean-man:

 	@echo "  RM     'docs/ct-ng.1'"

 	@rm -f docs/ct-ng.1

 	@echo "  RM     'docs/ct-ng.1.gz'"

 	@rm -f docs/ct-ng.1.gz

 #--------------------------------------

 # Check for --local setup

 ifeq ($(strip $(LOCAL)),y)

 real-install:

 	@true

 real-uninstall:

 	@true

 else

 #--------------------------------------

 # Install rules

 real-install: $(patsubst %,install-%,$(TARGETS)) install-post

 install-bin: $(DESTDIR)$(BINDIR)

 	@echo "  INST    'ct-ng'"

 	@$(install) -m 755 ct-ng "$(DESTDIR)$(BINDIR)/ct-ng"

 # If one is hacking crosstool-NG, the patch set might change between any two

 # installations of the same VERSION, thus the patches must be removed prior

 # to being installed. It is simpler to remove the whole lib/ directory, as it

 # is the goal of the install-lib rule to install the lib/ directory...

 install-lib: uninstall-lib $(DESTDIR)$(LIBDIR) install-lib-main install-lib-samples

 LIB_SUB_DIR := config contrib kconfig patches scripts

 $(patsubst %,install-lib-%-copy,$(LIB_SUB_DIR)): $(DESTDIR)$(LIBDIR)

 	@echo "  INSTDIR '$(patsubst install-lib-%-copy,%,$(@))/'"

 	@tar cf - --exclude='*.sh.in' $(patsubst install-lib-%-copy,%,$(@)) \

 	 |(cd "$(DESTDIR)$(LIBDIR)"; tar xf -)

 # Huh? It seems we need at least one command to make this rule kick-in.

 install-lib-%: install-lib-%-copy; @true

 # Huh? that one does not inherit the -opy dependency, above...

 install-lib-scripts: install-lib-scripts-copy

 	@chmod a+x $(DESTDIR)$(LIBDIR)/scripts/crosstool-NG.sh

 	@chmod a+x $(DESTDIR)$(LIBDIR)/scripts/saveSample.sh

 	@rm -f "$(DESTDIR)$(LIBDIR)/scripts/addToolVersion.sh"

 install-lib-main: $(DESTDIR)$(LIBDIR) $(patsubst %,install-lib-%,$(LIB_SUB_DIR))

 	@echo "  INST    'steps.mk'"

 	@$(install) -m 644 steps.mk "$(DESTDIR)$(LIBDIR)/steps.mk"

 	@echo "  INST    'paths.mk'"

 	@$(install) -m 644 paths.mk "$(DESTDIR)$(LIBDIR)/paths.mk"

 # Samples need a little love:

 #  - change every occurrence of CT_TOP_DIR to CT_LIB_DIR

 install-lib-samples: $(DESTDIR)$(LIBDIR) install-lib-main

 	@echo "  INSTDIR 'samples/'"

 	@tar cf - samples |(cd "$(DESTDIR)$(LIBDIR)"; tar xf -)

 	@for samp_file in "$(DESTDIR)$(LIBDIR)/samples/"*"/crosstool.config"; do                    \

 	     $(sed) -r -i -e 's,\$$\{CT_TOP_DIR\},\$$\{CT_LIB_DIR\},g;' $${samp_file};           \

 	     $(sed) -r -i -e 's,^(CT_WORK_DIR)=.*,\1="\$${CT_TOP_DIR}/targets",;' $${samp_file}; \

 	 done

 install-doc: $(DESTDIR)$(DOCDIR)

 	@for doc_file in docs/CREDITS docs/overview.txt; do             \

 	     echo "  INST    '$${doc_file}'";                           \

 	     $(install) -m 644 "$${doc_file}" "$(DESTDIR)$(DOCDIR)"; \

 	 done

 install-man: $(DESTDIR)$(MANDIR)$(MAN_SUBDIR)

 	@echo "  INST    'ct-ng.1.gz'"

 	@$(install) -m 644 docs/ct-ng.1.gz "$(DESTDIR)$(MANDIR)$(MAN_SUBDIR)"

 $(sort $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(DOCDIR) $(DESTDIR)$(MANDIR)$(MAN_SUBDIR)):

 	@echo "  MKDIR   '$@/'"

 	@$(install) -m 755 -d "$@"

 install-post:

 	@echo

 	@echo "For auto-completion, do not forget to install 'ct-ng.comp' into"

 	@echo "your bash completion directory (usually /etc/bash_completion.d)"

 #--------------------------------------

 # Uninstall rules

 real-uninstall: $(patsubst %,uninstall-%,$(TARGETS))

 uninstall-bin:

 	@echo "  RM      '$(DESTDIR)$(BINDIR)/ct-ng'"

 	@rm -f "$(DESTDIR)$(BINDIR)/ct-ng"

 uninstall-lib:

 	@echo "  RMDIR   '$(DESTDIR)$(LIBDIR)/'"

 	@rm -rf "$(DESTDIR)$(LIBDIR)"

 uninstall-doc:

 	@echo "  RMDIR   '$(DESTDIR)$(DOCDIR)/'"

 	@rm -rf "$(DESTDIR)$(DOCDIR)"

 uninstall-man:

 	@echo "  RM      '$(DESTDIR)$(MANDIR)/ct-ng.1.gz'"

 	@rm -f "$(DESTDIR)$(MANDIR)/ct-ng.1"{,.gz}

 endif # Not --local

 endif # No extra MAKEFLAGS were added