# Makefile.in for building crosstool-NG

 # This file serves as source for the ./configure operation

 # This series of test is here because GNU make 3.81 will *not* use MAKEFLAGS

 # to set additional flags in the current Makfile ( see:

 # http://savannah.gnu.org/bugs/?20501 ), although the make manual says it

 # should ( see: http://www.gnu.org/software/make/manual/make.html#Options_002fRecursion )

 # so we have to work it around by calling ourselves back if needed

 # So why do we need not to use the built rules and variables? Because we

 # need to generate scripts/crosstool-NG.sh from scripts/crosstool-NG.sh.in

 # and there is a built-in implicit rule '%.sh:' that has neither a pre-requisite

 # nor a command associated, and that built-in implicit rule takes precedence

 # over our non-built-in implicit rule '%: %.in', below.

 # CT_MAKEFLAGS will be used later, below...

 # Do not print directories as we descend into them

 ifeq ($(filter --no-print-directory,$(MAKEFLAGS)),)

 CT_MAKEFLAGS += --no-print-directory

 endif

 # Use neither builtin rules, nor builtin variables

 # Note: dual test, because if -R and -r are given on the command line

 # (who knows?), MAKEFLAGS contains 'Rr' instead of '-Rr', while adding

 # '-Rr' to MAKEFLAGS adds it literaly ( and does not add 'Rr' )

 ifeq ($(filter Rr,$(MAKEFLAGS)),)

 ifeq ($(filter -Rr,$(MAKEFLAGS)),)

 CT_MAKEFLAGS += -Rr

 endif # No -Rr

 endif # No Rr

 # Remove any suffix rules

 .SUFFIXES:

 all: Makefile build

 ###############################################################################

 # Configuration variables

 # Stuff found by ./configure

 export DATE            := @DATE@

 export LOCAL           := @enable_local@

 export PROG_SED        := @program_transform_name@

 export PACKAGE_TARNAME := @PACKAGE_TARNAME@

 export VERSION         := @PACKAGE_VERSION@

 export prefix          := @prefix@

 export exec_prefix     := @exec_prefix@

 export bindir          := @bindir@

 export libdir          := @libdir@@sublibdir@

 export docdir          := @docdir@@subdocdir@

 export mandir          := @mandir@

 export datarootdir     := @datarootdir@

 export install         := @INSTALL@

 export bash            := @_BASH@

 export awk             := @_AWK@

 export grep            := @GREP@

 export make            := @MAKE@

 export sed             := @SED@

 export libtool         := @LIBTOOL@

 export libtoolize      := @LIBTOOLIZE@

 export objcopy         := @OBJCOPY@

 export objdump         := @OBJDUMP@

 export readelf         := @READELF@

 export patch           := @PATCH@

 export CC              := @CC@

 export CPP             := @CPP@

 export CPPFLAGS        := @CPPFLAGS@

 export CFLAGS          := @CFLAGS@

 export LDFLAGS         := @LDFLAGS@

 export LIBS            := @LIBS@

 export curses_hdr      := @ac_ct_curses_hdr@

 export gettext         := @gettext@

 # config options to push down to kconfig

 KCONFIG:= @kconfig_options@

 ###############################################################################

 # Non-configure variables

 MAN_SECTION := 1

 MAN_SUBDIR := /man$(MAN_SECTION)

 PROG_NAME := $(shell echo 'ct-ng' |$(sed) -r -e '$(PROG_SED)' )

 ###############################################################################

 # Sanity checks

 # Check if Makefile is up to date:

 Makefile: Makefile.in

 	@echo "$< did changed: you must re-run './configure'"

 	@false

 # If installing with DESTDIR, check it's an absolute path

 ifneq ($(strip $(DESTDIR)),)

   ifneq ($(DESTDIR),$(abspath /$(DESTDIR)))

     $(error DESTDIR is not an absolute PATH: '$(DESTDIR)')

   endif

 endif

 ###############################################################################

 # Global make rules

 # If any extra MAKEFLAGS were added, re-run ourselves

 # See top of file for an explanation of why this is needed...

 ifneq ($(strip $(CT_MAKEFLAGS)),)

 # Somehow, the new auto-completion for make in the recent distributions

 # trigger a behavior where our Makefile calls itself recursively, in a

 # never-ending loop (except on lack of ressources, swap, PIDs...)

 # Avoid this situation by cutting the recursion short at the first

 # level.

 # This has the side effect of only showing the real targets, and hiding our

 # internal ones. :-)

 ifneq ($(MAKELEVEL),0)

 $(error Recursion detected, bailing out...)

 endif

 MAKEFLAGS += $(CT_MAKEFLAGS)

 build install clean distclean mrproper uninstall:

 	@$(MAKE) $@

 else

 # There were no additional MAKEFLAGS to add, do the job

 TARGETS := bin lib lib-kconfig doc man

 build: $(patsubst %,build-%,$(TARGETS))

 install: build real-install

 clean: $(patsubst %,clean-%,$(TARGETS))

 distclean: clean

 	@echo "  RM     'Makefile'"

 	@rm -f Makefile

 mrproper: distclean

 	@echo "  RM     'autostuff'"

 	@ rm -rf autom4te.cache config.log config.status configure

 uninstall: real-uninstall

 ###############################################################################

 # Specific make rules

 #--------------------------------------

 # Build rules

 build-bin: $(PROG_NAME)             \

            scripts/crosstool-NG.sh  \

            scripts/saveSample.sh    \

            scripts/showTuple.sh

 	@chmod 755 $^

 build-lib: config/configure.in  \

            paths.mk             \

            paths.sh

 build-lib-kconfig:

 	@$(MAKE) -C kconfig

 build-doc:

 build-man: docs/$(PROG_NAME).1.gz

 docs/$(PROG_NAME).1.gz: docs/$(PROG_NAME).1

 	@echo "  GZIP   '$@'"

 	@gzip -c9 $< >$@

 define sed_it

 	@echo "  SED    '$@'"

 	@$(sed) -r -e 's,@@CT_BINDIR@@,$(bindir),g;'        \

 	           -e 's,@@CT_LIBDIR@@,$(libdir),g;'        \

 	           -e 's,@@CT_DOCDIR@@,$(docdir),g;'        \

 	           -e 's,@@CT_MANDIR@@,$(mandir),g;'        \

 	           -e 's,@@CT_PROG_NAME@@,$(PROG_NAME),g;'  \

 	           -e 's,@@CT_VERSION@@,$(VERSION),g;'	    \

 	           -e 's,@@CT_DATE@@,$(DATE),g;'            \

 	           -e 's,@@CT_make@@,$(make),g;'            \

 	           -e 's,@@CT_bash@@,$(bash),g;'            \

 	           -e 's,@@CT_awk@@,$(awk),g;'              \

 	           $< >$@

 endef

 docs/$(PROG_NAME).1: docs/ct-ng.1.in Makefile

 	$(call sed_it)

 $(PROG_NAME): ct-ng.in Makefile

 	$(call sed_it)

 %: %.in Makefile

 	$(call sed_it)

 # We create a script fragment that is parseable from inside a Makefile,

 # and one from inside a shell script

 paths.mk: FORCE

 	@echo "  GEN    '$@'"

 	@(echo 'export install=$(install)';         \

 	  echo 'export bash=$(bash)';               \

 	  echo 'export awk=$(awk)';                 \

 	  echo 'export grep=$(grep)';               \

 	  echo 'export make=$(make)';               \

 	  echo 'export sed=$(sed)';                 \

 	  echo 'export libtool=$(libtool)';         \

 	  echo 'export libtoolize=$(libtoolize)';   \

 	  echo 'export objcopy=$(objcopy)';         \

 	  echo 'export objdump=$(objdump)';         \

 	  echo 'export readelf=$(readelf)';         \

 	  echo 'export patch=$(patch)';             \

 	 ) >$@

 paths.sh: FORCE

 	@echo "  GEN    '$@'"

 	@(echo 'export install="$(install)"';       \

 	  echo 'export bash="$(bash)"';             \

 	  echo 'export awk="$(awk)"';               \

 	  echo 'export grep="$(grep)"';             \

 	  echo 'export make="$(make)"';             \

 	  echo 'export sed="$(sed)"';               \

 	  echo 'export libtool="$(libtool)"';       \

 	  echo 'export libtoolize="$(libtoolize)"'; \

 	  echo 'export objcopy="$(objcopy)"';       \

 	  echo 'export objdump="$(objdump)"';       \

 	  echo 'export readelf="$(readelf)"';       \

 	  echo 'export patch="$(patch)"';           \

 	 ) >$@

 config/configure.in: FORCE

 	@echo "  GEN    '$@'"

 	@{  printf "# Generated file, do not edit\n";            \

 	    printf "# Default values as found by ./configure\n"; \

 	    for var in $(KCONFIG); do                            \

 	        printf "\n";                                     \

 	        printf "config CONFIGURE_$${var%%=*}\n";         \

 	        if [ "$${var#*=}" = "y" ]; then                  \

 	            printf "    def_bool y\n";                   \

 	        else                                             \

 	            printf "    bool\n";                         \

 	        fi;                                              \

 	    done;                                                \

 	 } >$@

 FORCE:

 #--------------------------------------

 # Clean rules

 clean-bin:

 	@echo "  RM     '$(PROG_NAME)'"

 	@rm -f $(PROG_NAME)

 	@echo "  RM     'scripts/crosstool-NG.sh'"

 	@rm -f scripts/crosstool-NG.sh

 	@echo "  RM     'scripts/saveSample.sh'"

 	@rm -f scripts/saveSample.sh

 	@echo "  RM     'scripts/showTuple.sh'"

 	@rm -f scripts/showTuple.sh

 clean-lib:

 	@echo "  RM     'paths'"

 	@rm -f paths.mk paths.sh

 	@echo "  RM     'config/configure.in'"

 	@rm -f config/configure.in

 clean-lib-kconfig:

 	@$(MAKE) -C kconfig clean

 clean-doc:

 clean-man:

 	@echo "  RM     'docs/$(PROG_NAME).1'"

 	@rm -f docs/$(PROG_NAME).1

 	@echo "  RM     'docs/$(PROG_NAME).1.gz'"

 	@rm -f docs/$(PROG_NAME).1.gz

 #--------------------------------------

 # Check for --local setup

 ifeq ($(strip $(LOCAL)),yes)

 real-install:

 	@true

 real-uninstall:

 	@true

 else

 #--------------------------------------

 # Install rules

 real-install: $(patsubst %,install-%,$(TARGETS)) install-post

 install-bin: $(DESTDIR)$(bindir)

 	@echo "  INST    '$(PROG_NAME)'"

 	@$(install) -m 755 $(PROG_NAME) "$(DESTDIR)$(bindir)/$(PROG_NAME)"

 # If one is hacking crosstool-NG, the patch set might change between any two

 # installations of the same VERSION, thus the patches must be removed prior

 # to being installed. It is simpler to remove the whole lib/ directory, as it

 # is the goal of the install-lib rule to install the lib/ directory...

 install-lib: uninstall-lib          \

              $(DESTDIR)$(libdir)    \

              install-lib-main       \

              install-lib-samples

 LIB_SUB_DIR := config contrib patches scripts

 $(patsubst %,install-lib-%-copy,$(LIB_SUB_DIR)): $(DESTDIR)$(libdir)

 	@echo "  INSTDIR '$(patsubst install-lib-%-copy,%,$(@))/'"

 	@tar cf - --exclude='*.sh.in' $(patsubst install-lib-%-copy,%,$(@)) \

 	 |(cd "$(DESTDIR)$(libdir)"; tar xf -)

 # Huh? It seems we need at least one command to make this rule kick-in.

 install-lib-%: install-lib-%-copy; @true

 # Huh? that one does not inherit the -opy dependency, above...

 install-lib-scripts: install-lib-scripts-copy

 	@chmod a+x $(DESTDIR)$(libdir)/scripts/crosstool-NG.sh

 	@chmod a+x $(DESTDIR)$(libdir)/scripts/saveSample.sh

 	@rm -f "$(DESTDIR)$(libdir)/scripts/addToolVersion.sh"

 install-lib-main: $(DESTDIR)$(libdir) $(patsubst %,install-lib-%,$(LIB_SUB_DIR))

 	@echo "  INST    'steps.mk'"

 	@$(install) -m 644 steps.mk "$(DESTDIR)$(libdir)/steps.mk"

 	@echo "  INST    'paths'"

 	@$(install) -m 644 paths.mk paths.sh "$(DESTDIR)$(libdir)"

 # Samples need a little love:

 #  - change every occurrence of CT_TOP_DIR to CT_LIB_DIR

 install-lib-samples: $(DESTDIR)$(libdir) install-lib-main

 	@echo "  INSTDIR 'samples/'"

 	@for samp_dir in samples/*/; do                                         \

 	     mkdir -p "$(DESTDIR)$(libdir)/$${samp_dir}";                       \

 	     $(sed) -r -e 's:\$$\{CT_TOP_DIR\}:\$$\{CT_LIB_DIR\}:;'             \

 	               -e 's:^(CT_WORK_DIR)=.*:\1="\$${CT_TOP_DIR}/.build":;'   \

 	            $${samp_dir}/crosstool.config                               \

 	            >"$(DESTDIR)$(libdir)/$${samp_dir}/crosstool.config";       \

 	     $(install) -m 644 "$${samp_dir}/reported.by"                       \

 	                       "$(DESTDIR)$(libdir)/$${samp_dir}";              \

 	     for libc_cfg in "$${samp_dir}/"*libc*.config; do                   \

 	         [ -f "$${libc_cfg}" ] || continue;                             \

 	         $(install) -m 644 "$${libc_cfg}"                               \

 	                           "$(DESTDIR)$(libdir)/$${samp_dir}";          \

 	     done;                                                              \

 	 done

 	@$(install) -m 644 samples/samples.mk "$(DESTDIR)$(libdir)/samples/samples.mk"

 KCONFIG_FILES := conf mconf nconf kconfig.mk

 install-lib-kconfig: $(DESTDIR)$(libdir) install-lib-main

 	@echo "  INST    'kconfig/'"

 	@mkdir -p "$(DESTDIR)$(libdir)/kconfig"

 	@for f in $(KCONFIG_FILES); do                                      \

 	    install "kconfig/$${f}" "$(DESTDIR)$(libdir)/kconfig/$${f}";    \

 	 done

 install-doc: $(DESTDIR)$(docdir)

 	@echo "  INST    'docs/*.txt'"

 	@for doc_file in docs/*.txt; do                              \

 	     $(install) -m 644 "$${doc_file}" "$(DESTDIR)$(docdir)"; \

 	 done

 install-man: $(DESTDIR)$(mandir)$(MAN_SUBDIR)

 	@echo "  INST    '$(PROG_NAME).1.gz'"

 	@$(install) -m 644 docs/$(PROG_NAME).1.gz "$(DESTDIR)$(mandir)$(MAN_SUBDIR)"

 $(sort $(DESTDIR)$(bindir) $(DESTDIR)$(libdir) $(DESTDIR)$(docdir) $(DESTDIR)$(mandir)$(MAN_SUBDIR)):

 	@echo "  MKDIR   '$@/'"

 	@$(install) -m 755 -d "$@"

 install-post:

 	@echo

 	@echo "For auto-completion, do not forget to install '$(PROG_NAME).comp' into"

 	@echo "your bash completion directory (usually /etc/bash_completion.d)"

 #--------------------------------------

 # Uninstall rules

 real-uninstall: $(patsubst %,uninstall-%,$(TARGETS))

 uninstall-bin:

 	@echo "  RM      '$(DESTDIR)$(bindir)/$(PROG_NAME)'"

 	@rm -f "$(DESTDIR)$(bindir)/$(PROG_NAME)"

 uninstall-lib:

 	@echo "  RMDIR   '$(DESTDIR)$(libdir)/'"

 	@rm -rf "$(DESTDIR)$(libdir)"

 uninstall-doc:

 	@echo "  RMDIR   '$(DESTDIR)$(docdir)/'"

 	@rm -rf "$(DESTDIR)$(docdir)"

 uninstall-man:

 	@echo "  RM      '$(DESTDIR)$(mandir)$(MAN_SUBDIR)/$(PROG_NAME).1.gz'"

 	@rm -f "$(DESTDIR)$(mandir)$(MAN_SUBDIR)/$(PROG_NAME).1"{,.gz}

 endif # Not --local

 endif # No extra MAKEFLAGS were added

 .PHONY: build $(patsubst %,build-%,$(TARGETS)) install