Fix tools.sh and debug.sh now the tools/ and debug/ sub-dirs are numerically sorted.
/trunk/scripts/build/debug.sh | 4 2 2 0 ++--
/trunk/scripts/build/tools.sh | 4 2 2 0 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
2 # Copyright 2007 Yann E. MORIN
3 # Licensed under the GPL v2. See COPYING in the root of this package.
5 # This is the main entry point to crosstool
7 # - download, extract and patch the toolchain components
8 # - build and install each components in turn
9 # - and eventually test the resulting toolchain
11 # What this file does is prepare the environment, based upon the user-choosen
12 # options. It also checks the existing environment for un-friendly variables,
13 # and builds the tools.
15 # Parse the common functions
16 . "${CT_LIB_DIR}/scripts/functions"
18 CT_STAR_DATE=`CT_DoDate +%s%N`
19 CT_STAR_DATE_HUMAN=`CT_DoDate +%Y%m%d.%H%M%S`
21 # Are we configured? We'll need that later...
22 CT_TestOrAbort "Configuration file not found. Please create one." -f "${CT_TOP_DIR}/.config"
24 # Parse the configuration file
25 # It has some info about the logging facility, so include it early
26 . "${CT_TOP_DIR}/.config"
28 # Yes! We can do full logging from now on!
29 CT_DoLog INFO "Build started ${CT_STAR_DATE_HUMAN}"
32 renice ${CT_NICE} $$ |CT_DoLog DEBUG
34 CT_DoStep DEBUG "Dumping crosstool-NG configuration"
35 cat "${CT_TOP_DIR}/.config" |egrep '^(# |)CT_' |CT_DoLog DEBUG
38 # Some sanity checks in the environment and needed tools
39 CT_DoLog INFO "Checking environment sanity"
41 CT_DoLog DEBUG "Unsetting and unexporting MAKEFLAGS"
45 # Other environment sanity checks
46 CT_TestAndAbort "Don't set LD_LIBRARY_PATH. It screws up the build." -n "${LD_LIBRARY_PATH}"
47 CT_TestAndAbort "Don't set CFLAGS. It screws up the build." -n "${CFLAGS}"
48 CT_TestAndAbort "Don't set CXXFLAGS. It screws up the build." -n "${CXXFLAGS}"
49 CT_Test "GREP_OPTIONS screws up the build. Resetting." -n "${GREP_OPTIONS}"
57 CT_DoLog INFO "Building environment variables"
59 # Parse architecture-specific functions
60 . "${CT_LIB_DIR}/arch/${CT_ARCH}/functions"
62 # Target tuple: CT_TARGET needs a little love:
65 # Kludge: If any of the configured options needs CT_TARGET,
66 # then rescan the options file now:
67 . "${CT_TOP_DIR}/.config"
69 # Second kludge: merge user-supplied target CFLAGS with architecture-provided
71 CT_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_TARGET_CFLAGS}"
73 # Now, build up the variables from the user-configured options.
74 CT_KERNEL_FILE="${CT_KERNEL}-${CT_KERNEL_VERSION}"
75 CT_BINUTILS_FILE="binutils-${CT_BINUTILS_VERSION}"
76 CT_GMP_FILE="gmp-${CT_GMP_VERSION}"
77 CT_MPFR_FILE="mpfr-${CT_MPFR_VERSION}"
78 CT_CC_FILE="${CT_CC}-${CT_CC_VERSION}"
79 CT_LIBC_FILE="${CT_LIBC}-${CT_LIBC_VERSION}"
82 CT_TARBALLS_DIR="${CT_TOP_DIR}/targets/tarballs"
83 CT_SRC_DIR="${CT_TOP_DIR}/targets/src"
84 CT_BUILD_DIR="${CT_TOP_DIR}/targets/${CT_TARGET}/build"
85 CT_DEBUG_INSTALL_DIR="${CT_INSTALL_DIR}/${CT_TARGET}/debug-root"
86 # Note: we'll always install the core compiler in its own directory, so as to
87 # not mix the two builds: core and final.
88 CT_CC_CORE_STATIC_PREFIX_DIR="${CT_BUILD_DIR}/${CT_CC}-core-static"
89 CT_CC_CORE_SHARED_PREFIX_DIR="${CT_BUILD_DIR}/${CT_CC}-core-shared"
90 CT_STATE_DIR="${CT_TOP_DIR}/targets/${CT_TARGET}/state"
92 # We must ensure that we can restart if asked for!
93 if [ -n "${CT_RESTART}" -a ! -d "${CT_STATE_DIR}" ]; then
94 CT_DoLog ERROR "You asked to restart a non-restartable build"
95 CT_DoLog ERROR "This happened because you didn't set CT_DEBUG_CT_SAVE_STEPS"
96 CT_DoLog ERROR "in the config options for the previous build, or the state"
97 CT_DoLog ERROR "directory for the previous build was deleted."
98 CT_Abort "I will stop here to avoid any carnage"
101 # Make all path absolute, it so much easier!
102 CT_LOCAL_TARBALLS_DIR="`CT_MakeAbsolutePath \"${CT_LOCAL_TARBALLS_DIR}\"`"
104 # If the local tarball directory does not exist, say so, and don't try to save there!
105 if [ ! -d "${CT_LOCAL_TARBALLS_DIR}" ]; then
106 CT_DoLog WARN "Directory \"${CT_LOCAL_TARBALLS_DIR}\" does not exist. Will not save downloaded tarballs to local storage."
110 # Some more sanity checks now that we have all paths set up
111 case "${CT_LOCAL_TARBALLS_DIR},${CT_TARBALLS_DIR},${CT_SRC_DIR},${CT_BUILD_DIR},${CT_PREFIX_DIR},${CT_INSTALL_DIR}" in
112 *" "*) CT_Abort "Don't use spaces in paths, it breaks things.";;
115 # Check now if we can write to the destination directory:
116 if [ -d "${CT_INSTALL_DIR}" ]; then
117 CT_TestAndAbort "Destination directory \"${CT_INSTALL_DIR}\" is not removable" ! -w `dirname "${CT_INSTALL_DIR}"`
120 # Good, now grab a bit of informations on the system we're being run on,
121 # just in case something goes awok, and it's not our fault:
122 CT_SYS_USER="`id -un`"
123 CT_SYS_HOSTNAME=`hostname -f 2>/dev/null || true`
124 # Hmmm. Some non-DHCP-enabled machines do not have an FQDN... Fall back to node name.
125 CT_SYS_HOSTNAME="${CT_SYS_HOSTNAME:-`uname -n`}"
126 CT_SYS_KERNEL=`uname -s`
127 CT_SYS_REVISION=`uname -r`
128 # MacOS X lacks '-o' :
129 CT_SYS_OS=`uname -o || echo "Unknown (maybe MacOS-X)"`
130 CT_SYS_MACHINE=`uname -m`
131 CT_SYS_PROCESSOR=`uname -p`
132 CT_SYS_GCC=`gcc -dumpversion`
133 CT_SYS_TARGET=`CT_DoConfigGuess`
134 CT_TOOLCHAIN_ID="crosstool-${CT_VERSION} build ${CT_STAR_DATE_HUMAN} by ${CT_SYS_USER}@${CT_SYS_HOSTNAME}"
136 CT_DoLog EXTRA "Preparing working directories"
138 # Ah! The build directory shall be eradicated, even if we restart!
139 if [ -d "${CT_BUILD_DIR}" ]; then
140 mv "${CT_BUILD_DIR}" "${CT_BUILD_DIR}.$$"
141 chmod -R u+w "${CT_BUILD_DIR}.$$"
142 setsid nohup rm -rf "${CT_BUILD_DIR}.$$" >/dev/null 2>&1 &
145 # Don't eradicate directories if we need to restart
146 if [ -z "${CT_RESTART}" ]; then
147 # Get rid of pre-existing installed toolchain and previous build directories.
148 # We need to do that _before_ we can safely log, because the log file will
149 # most probably be in the toolchain directory.
150 if [ "${CT_FORCE_DOWNLOAD}" = "y" -a -d "${CT_TARBALLS_DIR}" ]; then
151 mv "${CT_TARBALLS_DIR}" "${CT_TARBALLS_DIR}.$$"
152 chmod -R u+w "${CT_TARBALLS_DIR}.$$"
153 setsid nohup rm -rf "${CT_TARBALLS_DIR}.$$" >/dev/null 2>&1 &
155 if [ "${CT_FORCE_EXTRACT}" = "y" -a -d "${CT_SRC_DIR}" ]; then
156 mv "${CT_SRC_DIR}" "${CT_SRC_DIR}.$$"
157 chmod -R u+w "${CT_SRC_DIR}.$$"
158 setsid nohup rm -rf "${CT_SRC_DIR}.$$" >/dev/null 2>&1 &
160 if [ -d "${CT_INSTALL_DIR}" ]; then
161 mv "${CT_INSTALL_DIR}" "${CT_INSTALL_DIR}.$$"
162 chmod -R u+w "${CT_INSTALL_DIR}.$$"
163 setsid nohup rm -rf "${CT_INSTALL_DIR}.$$" >/dev/null 2>&1 &
165 if [ -d "${CT_DEBUG_INSTALL_DIR}" ]; then
166 mv "${CT_DEBUG_INSTALL_DIR}" "${CT_DEBUG_INSTALL_DIR}.$$"
167 chmod -R u+w "${CT_DEBUG_INSTALL_DIR}.$$"
168 setsid nohup rm -rf "${CT_DEBUG_INSTALL_DIR}.$$" >/dev/null 2>&1 &
170 # In case we start anew, get rid of the previously saved state directory
171 if [ -d "${CT_STATE_DIR}" ]; then
172 mv "${CT_STATE_DIR}" "${CT_STATE_DIR}.$$"
173 chmod -R u+w "${CT_STATE_DIR}.$$"
174 setsid nohup rm -rf "${CT_STATE_DIR}.$$" >/dev/null 2>&1 &
178 # Create the directories we'll use, even if restarting: it does no harm to
179 # create already existent directories, and CT_BUILD_DIR needs to be created
181 mkdir -p "${CT_TARBALLS_DIR}"
182 mkdir -p "${CT_SRC_DIR}"
183 mkdir -p "${CT_BUILD_DIR}"
184 mkdir -p "${CT_INSTALL_DIR}"
185 mkdir -p "${CT_PREFIX_DIR}"
186 mkdir -p "${CT_DEBUG_INSTALL_DIR}"
187 mkdir -p "${CT_CC_CORE_STATIC_PREFIX_DIR}"
188 mkdir -p "${CT_CC_CORE_SHARED_PREFIX_DIR}"
189 mkdir -p "${CT_STATE_DIR}"
191 # Kludge: CT_INSTALL_DIR and CT_PREFIX_DIR might have grown read-only if
192 # the previous build was successful. To be able to move the logfile there,
193 # switch them back to read/write
194 chmod -R u+w "${CT_INSTALL_DIR}" "${CT_PREFIX_DIR}"
196 # Redirect log to the actual log file now we can
197 # It's quite understandable that the log file will be installed in the install
198 # directory, so we must first ensure it exists and is writeable (above) before
201 case "${CT_LOG_TO_FILE}" in
202 y) CT_LOG_FILE="${CT_PREFIX_DIR}/build.log"
203 cat "${tmp_log_file}" >>"${CT_LOG_FILE}"
204 rm -f "${tmp_log_file}"
205 exec >>"${CT_LOG_FILE}"
207 *) rm -f "${tmp_log_file}"
211 # Set environment for proxy access
212 # This has to be done even if we are restarting, as they don't get
213 # saved in the step snapshot.
214 case "${CT_PROXY_TYPE}" in
218 case "${CT_PROXY_USER}:${CT_PROXY_PASS}" in
220 :*) http_proxy="${http_proxy}:${CT_PROXY_PASS}@";;
221 *:) http_proxy="${http_proxy}${CT_PROXY_USER}@";;
222 *:*) http_proxy="${http_proxy}${CT_PROXY_USER}:${CT_PROXY_PASS}@";;
224 export http_proxy="${http_proxy}${CT_PROXY_HOST}:${CT_PROXY_PORT}/"
225 export https_proxy="${http_proxy}"
226 export ftp_proxy="${http_proxy}"
227 CT_DoLog DEBUG "http_proxy='${http_proxy}'"
231 # Force not using HTTP proxy
232 unset http_proxy ftp_proxy https_proxy
237 # Force not using HTTP proxy
238 unset http_proxy ftp_proxy https_proxy
239 # Remove any lingering config file from any previous run
240 rm -f "${CT_BUILD_DIR}/tsocks.conf"
241 # Find all interfaces and build locally accessible networks
242 server_ip=$(ping -c 1 -W 2 "${CT_PROXY_HOST}" |head -n 1 |sed -r -e 's/^[^\(]+\(([^\)]+)\).*$/\1/;' || true)
243 CT_TestOrAbort "SOCKS proxy '${CT_PROXY_HOST}' has no IP." -n "${server_ip}"
244 /sbin/ifconfig |gawk -v server_ip="${server_ip}" '
246 split( server_ip, tmp, "\\." );
247 server_ip_num = tmp[1] * 2^24 + tmp[2] * 2^16 + tmp[3] * 2^8 + tmp[4] * 2^0;
251 $0 ~ /^[[:space:]]*inet addr:/ {
252 split( $2, tmp, ":|\\." );
253 if( ( tmp[2] == 127 ) && ( tmp[3] == 0 ) && ( tmp[4] == 0 ) && ( tmp[5] == 1 ) ) {
254 /* Skip 127.0.0.1, it'\''s taken care of by tsocks itself */
257 ip_num = tmp[2] * 2^24 + tmp[3] * 2^16 + tmp[4] * 2 ^8 + tmp[5] * 2^0;
262 } while( (i!=0) && ( and( server_ip_num, mask ) == and( ip_num, mask ) ) );
263 mask = and( 0xFFFFFFFF, lshift( mask, 1 ) );
264 if( (i!=0) && (mask!=0) ) {
265 masked_ip = and( ip_num, mask );
266 for( i=0; i<pairs; i++ ) {
267 if( ( masked_ip == ips[i] ) && ( mask == masks[i] ) ) {
271 ips[pairs] = masked_ip;
274 printf( "local = %d.%d.%d.%d/%d.%d.%d.%d\n",
275 and( 0xFF, masked_ip / 2^24 ),
276 and( 0xFF, masked_ip / 2^16 ),
277 and( 0xFF, masked_ip / 2^8 ),
278 and( 0xFF, masked_ip / 2^0 ),
279 and( 0xFF, mask / 2^24 ),
280 and( 0xFF, mask / 2^16 ),
281 and( 0xFF, mask / 2^8 ),
282 and( 0xFF, mask / 2^0 ) );
285 ' >"${CT_BUILD_DIR}/tsocks.conf"
286 ( echo "server = ${server_ip}";
287 echo "server_port = ${CT_PROXY_PORT}";
288 [ -n "${CT_PROXY_USER}" ] && echo "default_user=${CT_PROXY_USER}";
289 [ -n "${CT_PROXY_PASS}" ] && echo "default_pass=${CT_PROXY_PASS}";
290 ) >>"${CT_BUILD_DIR}/tsocks.conf"
291 case "${CT_PROXY_TYPE/socks}" in
292 4|5) proxy_type="${CT_PROXY_TYPE/socks}";;
294 reply=$(inspectsocks "${server_ip}" "${CT_PROXY_PORT}" 2>&1 || true)
296 *"server is a version 4 socks server") proxy_type=4;;
297 *"server is a version 5 socks server") proxy_type=5;;
298 *) CT_Abort "Unable to determine SOCKS proxy type for '${CT_PROXY_HOST}:${CT_PROXY_PORT}'"
302 echo "server_type = ${proxy_type}" >> "${CT_BUILD_DIR}/tsocks.conf"
303 validateconf -f "${CT_BUILD_DIR}/tsocks.conf" 2>&1 |CT_DoLog DEBUG
304 export TSOCKS_CONF_FILE="${CT_BUILD_DIR}/tsocks.conf"
309 # Setting up the rest of the environment only if not restarting
310 if [ -z "${CT_RESTART}" ]; then
311 # Determine build system if not set by the user
312 CT_Test "You did not specify the build system. That's OK, I can guess..." -z "${CT_BUILD}"
313 CT_BUILD="${CT_BUILD:-`CT_DoConfigGuess`}"
314 CT_BUILD=`CT_DoConfigSub "${CT_BUILD}"`
316 # Arrange paths depending on wether we use sys-root or not.
317 if [ "${CT_USE_SYSROOT}" = "y" ]; then
318 CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/sys-root"
319 CT_HEADERS_DIR="${CT_SYSROOT_DIR}/usr/include"
320 BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
321 CC_CORE_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
322 CC_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
324 # glibc's prefix must be exactly /usr, else --with-sysroot'd gcc will get
325 # confused when $sysroot/usr/include is not present.
326 # Note: --prefix=/usr is magic!
327 # See http://www.gnu.org/software/libc/FAQ.html#s-2.2
329 # plain old way. All libraries in prefix/target/lib
330 CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}"
331 CT_HEADERS_DIR="${CT_SYSROOT_DIR}/include"
332 # hack! Always use --with-sysroot for binutils.
333 # binutils 2.14 and later obey it, older binutils ignore it.
334 # Lets you build a working 32->64 bit cross gcc
335 BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
336 # Use --with-headers, else final gcc will define disable_glibc while
337 # building libgcc, and you'll have no profiling
338 CC_CORE_SYSROOT_ARG="--without-headers"
339 CC_SYSROOT_ARG="--with-headers=${CT_HEADERS_DIR}"
340 LIBC_SYSROOT_ARG="prefix="
343 # Prepare the 'lib' directories in sysroot, else the ../lib64 hack used by
344 # 32 -> 64 bit crosscompilers won't work, and build of final gcc will fail with
345 # "ld: cannot open crti.o: No such file or directory"
346 mkdir -p "${CT_SYSROOT_DIR}/lib"
347 mkdir -p "${CT_SYSROOT_DIR}/usr/lib"
349 # Canadian-cross are really picky on the way they are built. Tweak the values.
350 CT_UNIQ_BUILD=`echo "${CT_BUILD}" |sed -r -e 's/-/-build_/'`
351 if [ "${CT_CANADIAN}" = "y" ]; then
352 # Arrange so that gcc never, ever think that build system == host system
353 CT_CANADIAN_OPT="--build=${CT_UNIQ_BUILD}"
354 # We shall have a compiler for this target!
357 CT_HOST="${CT_BUILD}"
358 CT_CANADIAN_OPT="--build=${CT_BUILD}"
359 # Add the target toolchain in the path so that we can build the C library
360 # Carefully add paths in the order we want them:
361 # - first try in ${CT_PREFIX_DIR}/bin
362 # - then try in ${CT_CC_CORE_SHARED_PREFIX_DIR}/bin
363 # - then try in ${CT_CC_CORE_STATIC_PREFIX_DIR}/bin
364 # - fall back to searching user's PATH
365 export PATH="${CT_PREFIX_DIR}/bin:${CT_CC_CORE_SHARED_PREFIX_DIR}/bin:${CT_CC_CORE_STATIC_PREFIX_DIR}/bin:${PATH}"
368 # Modify GCC_HOST to never be equal to $BUILD or $TARGET
369 # This strange operation causes gcc to always generate a cross-compiler
370 # even if the build machine is the same kind as the host.
371 # This is why CC has to be set when doing a canadian cross; you can't find a
372 # host compiler by appending -gcc to our whacky $GCC_HOST
373 # Kludge: it is reported that the above causes canadian crosses with cygwin
374 # hosts to fail, so avoid it just in that one case. It would be cleaner to
375 # just move this into the non-canadian case above, but I'm afraid that might
376 # cause some configure script somewhere to decide that since build==host, they
377 # could run host binaries.
378 # (Copied almost as-is from original crosstool):
379 case "${CT_KERNEL},${CT_CANADIAN}" in
381 *,y) CT_HOST="`echo \"${CT_HOST}\" |sed -r -e 's/-/-host_/;'`";;
384 # Ah! Recent versions of binutils need some of the build and/or host system
385 # (read CT_BUILD and CT_HOST) tools to be accessible (ar is but an example).
387 CT_DoLog DEBUG "Making build system tools available"
388 mkdir -p "${CT_PREFIX_DIR}/bin"
389 for tool in ar as dlltool gcc g++ gnatbind gnatmake ld nm ranlib strip windres objcopy objdump; do
390 tmp=`CT_Which ${tool}`
391 if [ -n "${tmp}" ]; then
392 ln -sfv "${tmp}" "${CT_PREFIX_DIR}/bin/${CT_BUILD}-${tool}"
393 ln -sfv "${tmp}" "${CT_PREFIX_DIR}/bin/${CT_UNIQ_BUILD}-${tool}"
394 ln -sfv "${tmp}" "${CT_PREFIX_DIR}/bin/${CT_HOST}-${tool}"
400 [ "${CT_USE_PIPES}" = "y" ] && CT_CFLAGS_FOR_HOST="${CT_CFLAGS_FOR_HOST} -pipe"
402 # Override the configured jobs with what's been given on the command line
403 [ -n "${CT_JOBS}" ] && CT_PARALLEL_JOBS="${CT_JOBS}"
405 # And help make go faster
407 [ ${CT_PARALLEL_JOBS} -ne 0 ] && PARALLELMFLAGS="${PARALLELMFLAGS} -j${CT_PARALLEL_JOBS}"
408 [ ${CT_LOAD} -ne 0 ] && PARALLELMFLAGS="${PARALLELMFLAGS} -l${CT_LOAD}"
410 CT_DoStep EXTRA "Dumping internal crosstool-NG configuration"
411 CT_DoLog EXTRA "Building a toolchain for:"
412 CT_DoLog EXTRA " build = ${CT_BUILD}"
413 CT_DoLog EXTRA " host = ${CT_HOST}"
414 CT_DoLog EXTRA " target = ${CT_TARGET}"
415 set |egrep '^CT_.+=' |sort |CT_DoLog DEBUG
419 # Include sub-scripts instead of calling them: that way, we do not have to
420 # export any variable, nor re-parse the configuration and functions files.
421 . "${CT_LIB_DIR}/scripts/build/kernel_${CT_KERNEL}.sh"
422 . "${CT_LIB_DIR}/scripts/build/gmp.sh"
423 . "${CT_LIB_DIR}/scripts/build/mpfr.sh"
424 . "${CT_LIB_DIR}/scripts/build/binutils.sh"
425 . "${CT_LIB_DIR}/scripts/build/libc_${CT_LIBC}.sh"
426 . "${CT_LIB_DIR}/scripts/build/cc_${CT_CC}.sh"
427 . "${CT_LIB_DIR}/scripts/build/debug.sh"
428 . "${CT_LIB_DIR}/scripts/build/tools.sh"
430 if [ -z "${CT_RESTART}" ]; then
431 CT_DoStep INFO "Retrieving needed toolchain components' tarballs"
442 if [ "${CT_ONLY_DOWNLOAD}" != "y" ]; then
443 if [ "${CT_FORCE_EXTRACT}" = "y" ]; then
444 mv "${CT_SRC_DIR}" "${CT_SRC_DIR}.$$"
445 setsid nohup rm -rf "${CT_SRC_DIR}.$$" >/dev/null 2>&1
447 CT_DoStep INFO "Extracting and patching toolchain components"
460 # Now for the job by itself. Go have a coffee!
461 if [ "${CT_ONLY_DOWNLOAD}" != "y" -a "${CT_ONLY_EXTRACT}" != "y" ]; then
462 # Because of CT_RESTART, this becomes quite complex
465 [ -n "${CT_RESTART}" ] && do_it=0 || do_it=1
466 # Aha! CT_STEPS comes from steps.mk!
467 for step in ${CT_STEPS}; do
468 if [ ${do_it} -eq 0 ]; then
469 if [ "${CT_RESTART}" = "${step}" ]; then
470 CT_DoLoadState "${step}"
475 CT_DoSaveState ${step}
476 if [ ${do_stop} -eq 1 ]; then
477 CT_DoLog ERROR "Stopping just after step \"${prev_step}\", as requested."
481 if [ ${do_it} -eq 1 ]; then
483 if [ "${CT_STOP}" = "${step}" ]; then
486 if [ "${CTDEBUG_CT_PAUSE_STEPS}" = "y" ]; then
487 CT_DoPause "Step \"${step}\" finished"
493 CT_DoLog DEBUG "Removing access to the build system tools"
494 find "${CT_PREFIX_DIR}/bin" -name "${CT_BUILD}-"'*' -exec rm -fv {} \; |CT_DoLog DEBUG
495 find "${CT_PREFIX_DIR}/bin" -name "${CT_UNIQ_BUILD}-"'*' -exec rm -fv {} \; |CT_DoLog DEBUG
496 find "${CT_PREFIX_DIR}/bin" -name "${CT_HOST}-"'*' -exec rm -fv {} \; |CT_DoLog DEBUG
498 # Install the /populator/
499 CT_DoLog EXTRA "Installing the populate helper"
500 sed -r -e 's,@@CT_READELF@@,'"${CT_PREFIX_DIR}/bin/${CT_TARGET}-readelf"',g;' \
501 -e 's,@@CT_SYSROOT_DIR@@,'"${CT_SYSROOT_DIR}"',g;' \
502 "${CT_LIB_DIR}/tools/populate.in" >"${CT_PREFIX_DIR}/bin/${CT_TARGET}-populate"
503 chmod 755 "${CT_PREFIX_DIR}/bin/${CT_TARGET}-populate"
505 # Create the aliases to the target tools
506 CT_DoStep EXTRA "Creating toolchain aliases"
507 CT_Pushd "${CT_PREFIX_DIR}/bin"
508 for t in "${CT_TARGET}-"*; do
509 if [ -n "${CT_TARGET_ALIAS}" ]; then
510 _t="`echo \"$t\" |sed -r -e 's/^'\"${CT_TARGET}\"'-/'\"${CT_TARGET_ALIAS}\"'-/;'`"
511 CT_DoLog DEBUG "Linking \"${_t}\" -> \"${t}\""
512 ln -sv "${t}" "${_t}" 2>&1 |CT_DoLog ALL
514 if [ -n "${CT_TARGET_ALIAS_SED_EXPR}" ]; then
515 _t="`echo \"$t\" |sed -r -e \"${CT_TARGET_ALIAS_SED_EXPR}\"`"
516 CT_DoLog DEBUG "Linking \"${_t}\" -> \"${t}\""
517 ln -sv "${t}" "${_t}" 2>&1 |CT_DoLog ALL
523 # Remove the generated documentation files
524 if [ "${CT_REMOVE_DOCS}" = "y" ]; then
525 CT_DoLog INFO "Removing installed documentation"
526 rm -rf "${CT_PREFIX_DIR}/"{,usr/}{man,info}
527 rm -rf "${CT_SYSROOT_DIR}/"{,usr/}{man,info}
528 rm -rf "${CT_DEBUG_INSTALL_DIR}/"{,usr/}{man,info}
534 if [ "${CT_LOG_FILE_COMPRESS}" = y ]; then
535 CT_DoLog EXTRA "Compressing log file"
537 bzip2 -9 "${CT_LOG_FILE}"
540 if [ "${CT_INSTALL_DIR_RO}" = "y" ]; then
541 # OK, now we're done, set the toolchain read-only
542 # Don't log, the log file may become read-only any moment...
543 chmod -R a-w "${CT_INSTALL_DIR}" >/dev/null 2>&1