crosstool-ng: scripts/build/debug/300-gdb.sh@9fd11a562b78

     1 # Build script for the gdb debug facility

     3 # The version of ncurses to use. Yes, it's hard-coded.

     4 # It's used only internally by crosstool-NG, and is

     5 # not exposed outside, so we don't care about providing

     6 # config options for this.

     7 CT_DEBUG_GDB_NCURSES_VERSION="5.7"

     9 # Ditto for the expat library

    10 CT_DEBUG_GDB_EXPAT_VERSION="2.0.1"

    12 do_debug_gdb_parts() {

    13     do_gdb=

    14     do_ncurses=

    15     do_expat=

    17     if [ "${CT_GDB_CROSS}" = y ]; then

    18         do_gdb=y

    19     fi

    21     if [ "${CT_GDB_GDBSERVER}" = "y" ]; then

    22         do_gdb=y

    23     fi

    25     if [ "${CT_GDB_NATIVE}" = "y" ]; then

    26         do_gdb=y

    27         # GDB on Mingw depends on PDcurses, not ncurses

    28         if [ "${CT_MINGW32}" != "y" ]; then

    29             do_ncurses=y

    30         fi

    31         do_expat=y

    32     fi

    33 }

    35 do_debug_gdb_get() {

    36     local linaro_version

    37     local linaro_series

    38     local linaro_base_url="http://launchpad.net/gdb-linaro"

    40     # Account for the Linaro versioning

    41     linaro_version="$( echo "${CT_GDB_VERSION}"      \

    42                        |sed -r -e 's/^linaro-//;'   \

    43                      )"

    44     linaro_series="$( echo "${linaro_version}"      \

    45                       |sed -r -e 's/-.*//;'         \

    46                     )"

    48     do_debug_gdb_parts

    50     if [ "${do_gdb}" = "y" ]; then

    51         CT_GetFile "gdb-${CT_GDB_VERSION}"                          \

    52                    {ftp,http}://ftp.gnu.org/pub/gnu/gdb             \

    53                    ftp://sources.redhat.com/pub/gdb/{,old-}releases \

    54                    "${linaro_base_url}/${linaro_series}/${linaro_version}/+download"

    55     fi

    57     if [ "${do_ncurses}" = "y" ]; then

    58         CT_GetFile "ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}" .tar.gz  \

    59                    {ftp,http}://ftp.gnu.org/pub/gnu/ncurses \

    60                    ftp://invisible-island.net/ncurses

    61     fi

    63     if [ "${do_expat}" = "y" ]; then

    64         CT_GetFile "expat-${CT_DEBUG_GDB_EXPAT_VERSION}" .tar.gz    \

    65                    http://mesh.dl.sourceforge.net/sourceforge/expat/expat/${CT_DEBUG_GDB_EXPAT_VERSION}

    66     fi

    67 }

    69 do_debug_gdb_extract() {

    70     do_debug_gdb_parts

    72     if [ "${do_gdb}" = "y" ]; then

    73         CT_Extract "gdb-${CT_GDB_VERSION}"

    74         CT_Patch "gdb" "${CT_GDB_VERSION}"

    75     fi

    77     if [ "${do_ncurses}" = "y" ]; then

    78         CT_Extract "ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}"

    79         CT_DoExecLog ALL chmod -R u+w "${CT_SRC_DIR}/ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}"

    80         CT_Patch "ncurses" "${CT_DEBUG_GDB_NCURSES_VERSION}"

    81     fi

    83     if [ "${do_expat}" = "y" ]; then

    84         CT_Extract "expat-${CT_DEBUG_GDB_EXPAT_VERSION}"

    85         CT_Patch "expat" "${CT_DEBUG_GDB_EXPAT_VERSION}"

    86     fi

    87 }

    89 do_debug_gdb_build() {

    90     local -a extra_config

    92     do_debug_gdb_parts

    94     gdb_src_dir="${CT_SRC_DIR}/gdb-${CT_GDB_VERSION}"

    96     # Version 6.3 and below behave badly with gdbmi

    97     case "${CT_GDB_VERSION}" in

    98         6.2*|6.3)   extra_config+=("--disable-gdbmi");;

    99     esac

   101     if [ "${CT_GDB_CROSS}" = "y" ]; then

   102         local -a cross_extra_config

   104         CT_DoStep INFO "Installing cross-gdb"

   105         CT_DoLog EXTRA "Configuring cross-gdb"

   107         mkdir -p "${CT_BUILD_DIR}/build-gdb-cross"

   108         cd "${CT_BUILD_DIR}/build-gdb-cross"

   110         cross_extra_config=("${extra_config[@]}")

   111         case "${CT_THREADS}" in

   112             none)   cross_extra_config+=("--disable-threads");;

   113             *)      cross_extra_config+=("--enable-threads");;

   114         esac

   116         CC_for_gdb=

   117         LD_for_gdb=

   118         if [ "${CT_GDB_CROSS_STATIC}" = "y" ]; then

   119             CC_for_gdb="gcc -static"

   120             LD_for_gdb="ld -static"

   121         fi

   123         gdb_cross_configure="${gdb_src_dir}/configure"

   125         CT_DoLog DEBUG "Extra config passed: '${cross_extra_config[*]}'"

   127         CT_DoExecLog CFG                                \

   128         CC="${CC_for_gdb}"                              \

   129         LD="${LD_for_gdb}"                              \

   130         "${gdb_cross_configure}"                        \

   131             --build=${CT_BUILD}                         \

   132             --host=${CT_HOST}                           \

   133             --target=${CT_TARGET}                       \

   134             --prefix="${CT_PREFIX_DIR}"                 \

   135             --with-build-sysroot="${CT_SYSROOT_DIR}"    \

   136             --with-sysroot="${CT_SYSROOT_DIR}"          \

   137             --disable-werror                            \

   138             "${cross_extra_config[@]}"

   140         CT_DoLog EXTRA "Building cross-gdb"

   141         CT_DoExecLog ALL make ${JOBSFLAGS}

   143         CT_DoLog EXTRA "Installing cross-gdb"

   144         CT_DoExecLog ALL make install

   146         CT_EndStep

   147     fi

   149     if [ "${CT_GDB_NATIVE}" = "y" ]; then

   150         local -a native_extra_config

   151         local -a ncurses_opt

   152         local -a gdb_native_CFLAGS

   154         CT_DoStep INFO "Installing native gdb"

   156         native_extra_config=("${extra_config[@]}")

   158         # GDB on Mingw depends on PDcurses, not ncurses

   159         if [ "${do_ncurses}" = "y" ]; then

   160             CT_DoLog EXTRA "Building static target ncurses"

   162             [ "${CT_CC_LANG_CXX}" = "y" ] || ncurses_opts+=("--without-cxx" "--without-cxx-binding")

   163             [ "${CT_CC_LANG_ADA}" = "y" ] || ncurses_opts+=("--without-ada")

   165             mkdir -p "${CT_BUILD_DIR}/build-ncurses-build-tic"

   166             cd "${CT_BUILD_DIR}/build-ncurses-build-tic"

   168             # Use build = CT_REAL_BUILD so that configure thinks it is

   169             # cross-compiling, and thus will use the ${CT_BUILD}-*

   170             # tools instead of searching for the native ones...

   171             CT_DoExecLog CFG                                                    \

   172             "${CT_SRC_DIR}/ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}/configure"   \

   173                 --build=${CT_BUILD}                                             \

   174                 --host=${CT_BUILD}                                              \

   175                 --prefix=/usr                                                   \

   176                 --without-shared                                                \

   177                 --enable-symlinks                                               \

   178                 --with-build-cc=${CT_REAL_BUILD}-gcc                            \

   179                 --with-build-cpp=${CT_REAL_BUILD}-gcc                           \

   180                 --with-build-cflags="${CT_CFLAGS_FOR_HOST}"                     \

   181                 "${ncurses_opts[@]}"

   183             # Under some operating systems (eg. Winblows), there is an

   184             # extension appended to executables. Find that.

   185             tic_ext=$(grep -E '^x[[:space:]]*=' progs/Makefile |sed -r -e 's/^.*=[[:space:]]*//;')

   187             CT_DoExecLog ALL make ${JOBSFLAGS} -C include

   188             CT_DoExecLog ALL make ${JOBSFLAGS} -C progs "tic${tic_ext}"

   190             CT_DoExecLog ALL install -d -m 0755 "${CT_PREFIX_DIR}/buildtools"

   191             CT_DoExecLog ALL install -m 0755 "progs/tic${tic_ext}" "${CT_PREFIX_DIR}/buildtools"

   193             mkdir -p "${CT_BUILD_DIR}/build-ncurses"

   194             cd "${CT_BUILD_DIR}/build-ncurses"

   196             CT_DoExecLog CFG                                                    \

   197             "${CT_SRC_DIR}/ncurses-${CT_DEBUG_GDB_NCURSES_VERSION}/configure"   \

   198                 --build=${CT_BUILD}                                             \

   199                 --host=${CT_TARGET}                                             \

   200                 --with-build-cc=${CT_BUILD}-gcc                                 \

   201                 --with-build-cpp=${CT_BUILD}-gcc                                \

   202                 --with-build-cflags="${CT_CFLAGS_FOR_HOST}"                     \

   203                 --prefix="${CT_BUILD_DIR}/static-target"                        \

   204                 --without-shared                                                \

   205                 --without-sysmouse                                              \

   206                 --without-progs                                                 \

   207                 --enable-termcap                                                \

   208                 "${ncurses_opts[@]}"

   210             CT_DoExecLog ALL make ${JOBSFLAGS}

   212             CT_DoExecLog ALL make install

   214             # We no longer need the temporary tic. Remove it

   215             CT_DoExecLog DEBUG rm -fv "${CT_PREFIX_DIR}/buildtools/tic${tic_ext}"

   217             native_extra_config+=("--with-curses")

   218             # There's no better way to tell gdb where to find -lcurses... :-(

   219             gdb_native_CFLAGS+=("-I${CT_BUILD_DIR}/static-target/include")

   220             gdb_native_CFLAGS+=("-L${CT_BUILD_DIR}/static-target/lib")

   221         fi # do_ncurses

   223         if [ "${do_expat}" = "y" ]; then

   224             CT_DoLog EXTRA "Building static target expat"

   226             mkdir -p "${CT_BUILD_DIR}/expat-build"

   227             cd "${CT_BUILD_DIR}/expat-build"

   229             CT_DoExecLog CFG                                                \

   230             "${CT_SRC_DIR}/expat-${CT_DEBUG_GDB_EXPAT_VERSION}/configure"   \

   231                 --build=${CT_BUILD}                                         \

   232                 --host=${CT_TARGET}                                         \

   233                 --prefix="${CT_BUILD_DIR}/static-target"                    \

   234                 --enable-static                                             \

   235                 --disable-shared

   237             CT_DoExecLog ALL make ${JOBSFLAGS}

   238             CT_DoExecLog ALL make install

   240             native_extra_config+=("--with-expat")

   241             native_extra_config+=("--with-libexpat-prefix=${CT_BUILD_DIR}/static-target")

   242         fi # do_expat

   244         CT_DoLog EXTRA "Configuring native gdb"

   246         mkdir -p "${CT_BUILD_DIR}/build-gdb-native"

   247         cd "${CT_BUILD_DIR}/build-gdb-native"

   249         case "${CT_THREADS}" in

   250             none)   native_extra_config+=("--disable-threads");;

   251             *)      native_extra_config+=("--enable-threads");;

   252         esac

   254         if [ "${CT_GDB_NATIVE_STATIC}" = "y" ]; then

   255             CC_for_gdb="${CT_TARGET}-gcc -static"

   256             LD_for_gdb="${CT_TARGET}-ld -static"

   257         else

   258             CC_for_gdb="${CT_TARGET}-gcc"

   259             LD_for_gdb="${CT_TARGET}-ld"

   260         fi

   262         export ac_cv_func_strncmp_works=yes

   264         CT_DoLog DEBUG "Extra config passed: '${native_extra_config[*]}'"

   266         CT_DoExecLog CFG                                \

   267         CC="${CC_for_gdb}"                              \

   268         LD="${LD_for_gdb}"                              \

   269         CFLAGS="${gdb_native_CFLAGS[*]}"                \

   270         "${gdb_src_dir}/configure"                      \

   271             --build=${CT_BUILD}                         \

   272             --host=${CT_TARGET}                         \

   273             --target=${CT_TARGET}                       \

   274             --prefix=/usr                               \

   275             --with-build-sysroot="${CT_SYSROOT_DIR}"    \

   276             --without-uiout                             \

   277             --disable-tui                               \

   278             --disable-gdbtk                             \

   279             --without-x                                 \

   280             --disable-sim                               \

   281             --disable-werror                            \

   282             --without-included-gettext                  \

   283             --without-develop                           \

   284             "${native_extra_config[@]}"

   286         CT_DoLog EXTRA "Building native gdb"

   287         CT_DoExecLog ALL make ${JOBSFLAGS} CC=${CT_TARGET}-${CT_CC}

   289         CT_DoLog EXTRA "Installing native gdb"

   290         CT_DoExecLog ALL make DESTDIR="${CT_DEBUGROOT_DIR}" install

   292         # Building a native gdb also builds a gdbserver

   293         find "${CT_DEBUGROOT_DIR}" -type f -name gdbserver -exec rm -fv {} \; 2>&1 |CT_DoLog ALL

   295         unset ac_cv_func_strncmp_works

   297         # GDB on Mingw depends on PDcurses, not ncurses

   298         if [ "${CT_MINGW32}" != "y" ]; then

   299             CT_DoLog EXTRA "Cleaning up ncurses"

   300             cd "${CT_BUILD_DIR}/build-ncurses"

   301             CT_DoExecLog ALL make DESTDIR="${CT_SYSROOT_DIR}" uninstall

   303             CT_DoExecLog DEBUG rm -rf "${CT_BUILD_DIR}/ncurses"

   304         fi

   306         CT_EndStep # native gdb build

   307     fi

   309     if [ "${CT_GDB_GDBSERVER}" = "y" ]; then

   310         local -a gdbserver_extra_config

   312         CT_DoStep INFO "Installing gdbserver"

   313         CT_DoLog EXTRA "Configuring gdbserver"

   315         mkdir -p "${CT_BUILD_DIR}/build-gdb-gdbserver"

   316         cd "${CT_BUILD_DIR}/build-gdb-gdbserver"

   318         # Workaround for bad versions, where the configure

   319         # script for gdbserver is not executable...

   320         # Bah, GNU folks strike again... :-(

   321         chmod +x "${gdb_src_dir}/gdb/gdbserver/configure"

   323         gdbserver_LDFLAGS=

   324         if [ "${CT_GDB_GDBSERVER_STATIC}" = "y" ]; then

   325             gdbserver_LDFLAGS=-static

   326         fi

   328         gdbserver_extra_config=("${extra_config[@]}")

   330         CT_DoExecLog CFG                                \

   331         LDFLAGS="${gdbserver_LDFLAGS}"                  \

   332         "${gdb_src_dir}/gdb/gdbserver/configure"        \

   333             --build=${CT_BUILD}                         \

   334             --host=${CT_TARGET}                         \

   335             --target=${CT_TARGET}                       \

   336             --prefix=/usr                               \

   337             --sysconfdir=/etc                           \

   338             --localstatedir=/var                        \

   339             --includedir="${CT_HEADERS_DIR}"            \

   340             --with-build-sysroot="${CT_SYSROOT_DIR}"    \

   341             --program-prefix=                           \

   342             --without-uiout                             \

   343             --disable-tui                               \

   344             --disable-gdbtk                             \

   345             --without-x                                 \

   346             --without-included-gettext                  \

   347             --without-develop                           \

   348             --disable-werror                            \

   349             "${gdbserver_extra_config[@]}"

   351         CT_DoLog EXTRA "Building gdbserver"

   352         CT_DoExecLog ALL make ${JOBSFLAGS} CC=${CT_TARGET}-${CT_CC}

   354         CT_DoLog EXTRA "Installing gdbserver"

   355         CT_DoExecLog ALL make DESTDIR="${CT_DEBUGROOT_DIR}" install

   357         CT_EndStep

   358     fi

   359 }

author	"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
	Sat Sep 24 21:47:47 2011 +0200 (2011-09-24)
branch	1.11
changeset 2679	9fd11a562b78
parent 2344	7b6d5c5316ab
child 2490	cce067f0448e
permissions	-rw-r--r--