# This file adds functions to build glibc

 # Copyright 2007 Yann E. MORIN

 # Licensed under the GPL v2. See COPYING in the root of this package

 # Download glibc

 do_libc_get() {

     # Ah! Not all GNU folks seem stupid. All glibc releases are in the same

     # directory. Good. Alas, there is no snapshot there. I'll deal with them

     # later on... :-/

     CT_GetFile "${CT_LIBC_FILE}" ftp://ftp.gnu.org/gnu/glibc

     # C library addons

     addons_list=`echo "${CT_LIBC_ADDONS}" |sed -r -e 's/,/ /g; s/ $//g;'`

     for addon in ${addons_list}; do

         CT_GetFile "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}" ftp://ftp.gnu.org/gnu/glibc

     done

     [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && CT_GetFile "${CT_LIBC}-ports-${CT_LIBC_VERSION}" ftp://ftp.gnu.org/gnu/glibc

     return 0

 }

 # Extract glibc

 do_libc_extract() {

     CT_ExtractAndPatch "${CT_LIBC_FILE}"

     # C library addons

     addons_list=`echo "${CT_LIBC_ADDONS}" |sed -r -e 's/,/ /g; s/ $//g;'`

     for addon in ${addons_list}; do

         CT_ExtractAndPatch "${CT_LIBC}-${addon}-${CT_LIBC_VERSION}"

     done

     [ "${CT_LIBC_GLIBC_USE_PORTS}" = "y" ] && CT_ExtractAndPatch "${CT_LIBC}-ports-${CT_LIBC_VERSION}"

     return 0

 }

 # There is nothing to do for glibc check config

 do_libc_check_config() {

     :

 }

 # This function installs the glibc headers needed to build the core compiler

 do_libc_headers() {

     # Only need to install bootstrap glibc headers for gcc-3.0 and above?  Or maybe just gcc-3.3 and above?

     # See also http://gcc.gnu.org/PR8180, which complains about the need for this step.

     grep -q 'gcc-[34]' "${CT_SRC_DIR}/${CT_CC_CORE_FILE}/ChangeLog" || return 0

     CT_DoStep INFO "Installing C library headers"

     mkdir -p "${CT_BUILD_DIR}/build-libc-headers"

     cd "${CT_BUILD_DIR}/build-libc-headers"

     CT_DoLog EXTRA "Configuring C library headers"

     # The following three things have to be done to build glibc-2.3.x, but they don't hurt older versions.

     # 1. override CC to keep glibc's configure from using $TARGET-gcc. 

     # 2. disable linuxthreads, which needs a real cross-compiler to generate tcb-offsets.h properly

     # 3. build with gcc 3.2 or later

     # Compare these options with the ones used when building glibc for real below - they're different.

     # As of glibc-2.3.2, to get this step to work for hppa-linux, you need --enable-hacker-mode

     # so when configure checks to make sure gcc has access to the assembler you just built...

     # Alternately, we could put ${PREFIX}/${TARGET}/bin on the path.

     # Set --build so maybe we don't have to specify "cross-compiling=yes" below (haven't tried yet)

     # Note: the warning

     # "*** WARNING: Are you sure you do not want to use the `linuxthreads'"

     # *** add-on?"

     # is ok here, since all we want are the basic headers at this point.

     # Override libc_cv_ppc_machine so glibc-cvs doesn't complain

     # 'a version of binutils that supports .machine "altivec" is needed'.

     libc_cv_ppc_machine=yes                     \

     CC=${CT_CC_NATIVE}                          \

     "${CT_SRC_DIR}/${CT_LIBC_FILE}/configure"   \

         --build="${CT_BUILD}"                   \

         --host="${CT_TARGET}"                   \

         --prefix=/usr                           \

         --with-headers="${CT_HEADERS_DIR}"      \

         --without-cvs                           \

         --disable-sanity-checks                 \

         --enable-hacker-mode                    \

         --enable-add-ons=""                     \

         --without-nptl                          2>&1 |CT_DoLog DEBUG

     CT_DoLog EXTRA "Installing C library headers"

     if grep -q GLIBC_2.3 "${CT_SRC_DIR}/${CT_LIBC_FILE}/ChangeLog"; then

         # glibc-2.3.x passes cross options to $(CC) when generating errlist-compat.c,

         # which fails without a real cross-compiler.

         # Fortunately, we don't need errlist-compat.c, since we just need .h

         # files, so work around this by creating a fake errlist-compat.c and

         # satisfying its dependencies.

         # Another workaround might be to tell configure to not use any cross

         # options to $(CC).

         # The real fix would be to get install-headers to not generate

         # errlist-compat.c.

         # Note: BOOTSTRAP_GCC is used by:

         # patches/glibc-2.3.5/glibc-mips-bootstrap-gcc-header-install.patch

         libc_cv_ppc_machine=yes                             \

         make CFLAGS=-DBOOTSTRAP_GCC sysdeps/gnu/errlist.c   2>&1 |CT_DoLog DEBUG

         mkdir -p stdio-common

         # sleep for 2 seconds for benefit of filesystems with lousy time

         # resolution, like FAT, so make knows for sure errlist-compat.c doesn't

         # need generating

         sleep 2

         touch stdio-common/errlist-compat.c

     fi

     # Note: BOOTSTRAP_GCC (see above)

     libc_cv_ppc_machine=yes                                 \

     make cross-compiling=yes install_root=${CT_SYSROOT_DIR} \

         CFLAGS=-DBOOTSTRAP_GCC ${LIBC_SYSROOT_ARG}          \

         install-headers                                     2>&1 |CT_DoLog DEBUG

     # Two headers -- stubs.h and features.h -- aren't installed by install-headers,

     # so do them by hand.  We can tolerate an empty stubs.h for the moment.

     # See e.g. http://gcc.gnu.org/ml/gcc/2002-01/msg00900.html

     mkdir -p "${CT_HEADERS_DIR}/gnu"

     touch "${CT_HEADERS_DIR}/gnu/stubs.h"

     cp "${CT_SRC_DIR}/${CT_LIBC_FILE}/include/features.h" "${CT_HEADERS_DIR}/features.h"

     # Building the bootstrap gcc requires either setting inhibit_libc, or

     # having a copy of stdio_lim.h... see

     # http://sources.redhat.com/ml/libc-alpha/2003-11/msg00045.html

     cp bits/stdio_lim.h "${CT_HEADERS_DIR}/bits/stdio_lim.h"

     # Following error building gcc-4.0.0's gcj:

     #  error: bits/syscall.h: No such file or directory

     # solved by following copy; see http://sourceware.org/ml/crossgcc/2005-05/msg00168.html

     # but it breaks arm, see http://sourceware.org/ml/crossgcc/2006-01/msg00091.html

     [ "${CT_ARCH}" != "arm" ] && cp misc/syscall-list.h "${CT_HEADERS_DIR}/bits/syscall.h" || true

     CT_EndStep

 }

 # This function builds and install the full glibc

 do_libc() {

     CT_DoStep INFO "Installing C library"

     mkdir -p "${CT_BUILD_DIR}/build-libc"

     cd "${CT_BUILD_DIR}/build-libc"

     CT_DoLog EXTRA "Configuring C library"

     # Add some default glibc config options if not given by user.

     extra_config=""

     case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

         *enable-kernel*) ;;

         *) extra_config="${extra_config} --enable-kernel=${CT_KERNEL_VERSION}"

     esac

     case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

         *-tls*) ;;

         *) extra_config="${extra_config} --without-tls"

     esac

     case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

         *-__thread*) ;;

         *) extra_config="${extra_config} --without-__thread"

     esac

     case "${CT_SHARED_LIBS}" in

         y) extra_config="${extra_config} --enable-shared";;

         *) extra_config="${extra_config} --disable-shared";;

     esac

     case "${CT_LIBC_GLIBC_EXTRA_CONFIG}" in

     	*--with-fp*) ;;

     	*--without-fp*) ;;

     	*)  case "${CT_ARCH_FLOAT_HW},${CT_ARCH_FLOAT_SW}" in

                 y,) extra_config="${extra_config} --with-fp";;

                 ,y) extra_config="${extra_config} --without-fp";;

             esac;;

     esac

     case "${CT_LIBC_ADDONS},${CT_LIBC_ADDONS_LIST}" in

         y,) extra_config="${extra_config} --enable-add-ons";;

         y,*) extra_config="${extra_config} --enable-add-ons=${CT_LIBC_ADDONS_LIST}";;

     esac

     CT_DoLog DEBUG "Extra config args passed: \"${extra_config}\""

     # Add some default CC args

     extra_cc_args="${CT_CFLAGS_FOR_HOST}"

     case "${CT_LIBC_EXTRA_CC_ARGS}" in

         *-mbig-endian*) ;;

         *-mlittle-endian*) ;;

         *)  case "${CT_ARCH_BE},${CT_ARCH_LE}" in

                 y,) extra_cc_args="${extra_cc_args} -mbig-endian";;

                 ,y) extra_cc_args="${extra_cc_args} -mlittle-endian";;

             esac;;

     esac

     CT_DoLog DEBUG "Extra CC args passed: \"${extra_cc_args}\""

     # sh3 and sh4 really need to set configparms as of gcc-3.4/glibc-2.3.2

     # note: this is awkward, doesn't work well if you need more than one line in configparms

     echo ${CT_LIBC_GLIBC_CONFIGPARMS} > configparms

     # For glibc 2.3.4 and later we need to set some autoconf cache

     # variables, because nptl/sysdeps/pthread/configure.in does not

     # work when cross-compiling.

     if test -d ${GLIBC_DIR}/nptl; then

         libc_cv_forced_unwind=yes

         libc_cv_c_cleanup=yes

         export libc_cv_forced_unwind libc_cv_c_cleanup

     fi

     # Configure with --prefix the way we want it on the target...

     # There are a whole lot of settings here.  You'll probably want

     # to read up on what they all mean, and customize a bit, possibly by setting GLIBC_EXTRA_CONFIG

     # Compare these options with the ones used when installing the glibc headers above - they're different.

     # Adding "--without-gd" option to avoid error "memusagestat.c:36:16: gd.h: No such file or directory" 

     # See also http://sources.redhat.com/ml/libc-alpha/2000-07/msg00024.html. 

     # Set BUILD_CC, or you won't be able to build datafiles

     # Set --build, else glibc-2.3.2 will think you're not cross-compiling, and try to run the test programs

     BUILD_CC=${CT_CC_NATIVE}                                        \

     CFLAGS="${CT_TARGET_CFLAGS} ${CT_LIBC_GLIBC_EXTRA_CFLAGS} -O"   \

     CC="${CT_TARGET}-gcc ${CT_LIBC_EXTRA_CC_ARGS} ${extra_cc_args}" \

     AR=${CT_TARGET}-ar                                              \

     RANLIB=${CT_TARGET}-ranlib                                      \

     "${CT_SRC_DIR}/${CT_LIBC_FILE}/configure"                       \

         --prefix=/usr                                               \

         --build=${CT_BUILD} --host=${CT_TARGET}                     \

         ${CT_LIBC_GLIBC_EXTRA_CONFIG}                               \

         ${extra_config}                                             \

         --without-cvs                                               \

         --disable-profile                                           \

         --disable-debug                                             \

         --without-gd                                                \

         --with-headers="${CT_HEADERS_DIR}"                          2>&1 |CT_DoLog DEBUG

     if grep -l '^install-lib-all:' "${CT_SRC_DIR}/${CT_LIBC_FILE}/Makerules" > /dev/null; then

         # nptl-era glibc.

         # If the install-lib-all target (which is added by our make-install-lib-all.patch)

         # is present, it means we're building glibc-2.3.3 or later, and we can't

         # build programs yet, as they require libeh, which won't be installed

         # until full build of gcc

         GLIBC_INITIAL_BUILD_RULE=lib

         GLIBC_INITIAL_INSTALL_RULE="install-lib-all install-headers"

         GLIBC_INSTALL_APPS_LATER=yes

     else

         # classic glibc.  

         # We can build and install everything with the bootstrap compiler.

         GLIBC_INITIAL_BUILD_RULE=all

         GLIBC_INITIAL_INSTALL_RULE=install

         GLIBC_INSTALL_APPS_LATER=no

     fi

     # If this fails with an error like this:

     # ...  linux/autoconf.h: No such file or directory 

     # then you need to set the KERNELCONFIG variable to point to a .config file for this arch.

     # The following architectures are known to need kernel .config: alpha, arm, ia64, s390, sh, sparc

     # Note: LD and RANLIB needed by glibc-2.1.3's c_stub directory, at least on macosx

     # No need for PARALLELMFLAGS here, Makefile already reads this environment variable

     CT_DoLog EXTRA "Building C library"

     make LD=${CT_TARGET}-ld             \

          RANLIB=${CT_TARGET}-ranlib     \

          ${GLIBC_INITIAL_BUILD_RULE}    2>&1 |CT_DoLog DEBUG

     CT_DoLog EXTRA "Installing C library"

     make install_root="${CT_SYSROOT_DIR}"   \

          ${LIBC_SYSROOT_ARG}                \

          ${GLIBC_INITIAL_INSTALL_RULE}      2>&1 |CT_DoLog DEBUG

     # This doesn't seem to work when building a crosscompiler,

     # as it tries to execute localedef using the just-built ld.so!?

     #CT_DoLog EXTRA "Installing locales"

     #make localedata/install-locales install_root=${SYSROOT} 2>&1 |CT_DoLog DEBUG

     # Fix problems in linker scripts.

     #

     # 1. Remove absolute paths

     # Any file in a list of known suspects that isn't a symlink is assumed to be a linker script.

     # FIXME: test -h is not portable

     # FIXME: probably need to check more files than just these three...

     # Need to use sed instead of just assuming we know what's in libc.so because otherwise alpha breaks

     #

     # 2. Remove lines containing BUG per http://sources.redhat.com/ml/bug-glibc/2003-05/msg00055.html,

     # needed to fix gcc-3.2.3/glibc-2.3.2 targeting arm

     #

     # To make "strip *.so.*" not fail (ptxdist does this), rename to .so_orig rather than .so.orig

     CT_DoLog EXTRA "Fixing C library linker scripts"

     for file in libc.so libpthread.so libgcc_s.so; do

         for dir in lib lib64 usr/lib usr/lib64; do

             if [ -f "${CT_SYSROOT_DIR}/${dir}/${file}" -a ! -L ${CT_SYSROOT_DIR}/$lib/$file ]; then

                 mv "${CT_SYSROOT_DIR}/${dir}/${file}" "${CT_SYSROOT_DIR}/${dir}/${file}_orig"

                 CT_DoLog DEBUG "Fixing \"${CT_SYS_ROOT_DIR}/${dir}/${file}\""

                 sed -i -r -e 's,/usr/lib/,,g;

                               s,/usr/lib64/,,g;

                               s,/lib/,,g;

                               s,/lib64/,,g;

                               /BUG in libc.scripts.output-format.sed/d' "${CT_SYSROOT_DIR}/${dir}/${file}_orig"

             fi

         done

     done

     CT_EndStep

 }

 # This function finishes the glibc install

 do_libc_finish() {

     # Finally, build and install glibc programs, now that libeh (if any) is installed

     # Don't do this unless needed, 'cause it causes glibc-2.{1.3,2.2} to fail here with

     # .../gcc-3.4.1-glibc-2.1.3/build-glibc/libc.so.6: undefined reference to `__deregister_frame_info'

     # .../gcc-3.4.1-glibc-2.1.3/build-glibc/libc.so.6: undefined reference to `__register_frame_info'

     [ "${GLIBC_INSTALL_APPS_LATER}" = "yes" ] || return 0

     CT_DoStep INFO "Finishing C library"

     cd "${CT_BUILD_DIR}/build-libc"

     CT_DoLog EXTRA "Re-building C library"

     make LD=${CT_TARGET}-ld RANLIB=${CT_TARGET}-ranlib 2>&1 |CT_DoLog DEBUG

     CT_DoLog EXTRA "Installing missing C library components"

     # note: should do full install and then fix linker scripts, but this is faster

     for t in bin rootsbin sbin data others; do

         make install_root="${CT_SYSROOT_DIR}"   \

              ${LIBC_SYSROOT_ARG}                \

              install-${t}                       2>&1 |CT_DoLog DEBUG

     done

 }