diff -Naur newlib-1.17.0/COPYING.LIBGLOSS newlib-1.17.0-new/COPYING.LIBGLOSS

 --- newlib-1.17.0/COPYING.LIBGLOSS	2008-12-18 00:16:07.000000000 +0100

 +++ newlib-1.17.0-new/COPYING.LIBGLOSS	2009-05-22 09:57:49.000000000 +0200

 @@ -228,3 +228,33 @@

   LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

   OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

   SUCH DAMAGE.

 +

 +(13) Atmel Corporation  (avr32 targets only)

 +Copyright (c) 2006, Atmel Corporation All rights reserved.

 +

 +Redistribution and use in source and binary forms, with or without

 +modification, are permitted provided that the following conditions are met:

 +

 +1. Redistributions of source code must retain the above copyright notice,

 +this list of conditions and the following disclaimer.

 +

 +2. Redistributions in binary form must reproduce the above copyright notice,

 +this list of conditions and the following disclaimer in the documentation

 +and/or other materials provided with the distribution.

 +

 +3. The name of ATMEL may not be used to endorse or promote products

 +derived from this software without specific prior written permission.

 +

 +THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS

 +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

 +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

 +PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY

 +DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,

 +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

 +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

 +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

 +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

 +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

 +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY

 +WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

 +POSSIBILITY OF SUCH DAMAGE.

 diff -Naur newlib-1.17.0/COPYING.NEWLIB newlib-1.17.0-new/COPYING.NEWLIB

 --- newlib-1.17.0/COPYING.NEWLIB	2008-12-18 00:16:07.000000000 +0100

 +++ newlib-1.17.0-new/COPYING.NEWLIB	2009-05-22 09:57:49.000000000 +0200

 @@ -767,3 +767,33 @@

   LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY

   OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF

   SUCH DAMAGE.

 +

 +(35) Atmel Corporation  (avr32 targets only)

 +Copyright (c) 2006, Atmel Corporation All rights reserved.

 +

 +Redistribution and use in source and binary forms, with or without

 +modification, are permitted provided that the following conditions are met:

 +

 +1. Redistributions of source code must retain the above copyright notice,

 +this list of conditions and the following disclaimer.

 +

 +2. Redistributions in binary form must reproduce the above copyright notice,

 +this list of conditions and the following disclaimer in the documentation

 +and/or other materials provided with the distribution.

 +

 +3. The name of ATMEL may not be used to endorse or promote products

 +derived from this software without specific prior written permission.

 +

 +THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS

 +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

 +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

 +PARTICULAR PURPOSE ARE EXPRESSLY AND SPECIFICALLY

 +DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,

 +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

 +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

 +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

 +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

 +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

 +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY

 +WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

 +POSSIBILITY OF SUCH DAMAGE.

 diff -Naur newlib-1.17.0/newlib/configure.host newlib-1.17.0-new/newlib/configure.host

 --- newlib-1.17.0/newlib/configure.host	2008-12-18 00:09:09.000000000 +0100

 +++ newlib-1.17.0-new/newlib/configure.host	2009-05-22 09:57:49.000000000 +0200

 @@ -99,6 +99,10 @@

    arm)

  	machine_dir=arm

  	;;

 +  avr32*)

 +	machine_dir=avr32

 +	newlib_cflags="${newlib_cflags} -ffunction-sections"

 +	;;

    avr*)

  	newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues"

  	;;

 @@ -365,6 +369,9 @@

    crx*)

  	sys_dir=

  	;;

 +  avr32-*-*)

 +	sys_dir=avr32 

 +	;;

    d10v*)

  	sys_dir=d10v

  	;;

 @@ -575,6 +582,10 @@

    arc*)

  	newlib_cflags="${newlib_cflags} -DREENTRANT_SYSCALLS_PROVIDED"

  	;;

 +  avr32*)

 +	syscall_dir=syscalls	

 +	newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM"

 +	;;

    avr*)

  	newlib_cflags="${newlib_cflags} -DNO_EXEC -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"

  	;;

 diff -Naur newlib-1.17.0/newlib/libc/include/machine/ieeefp.h newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h

 --- newlib-1.17.0/newlib/libc/include/machine/ieeefp.h	2008-12-11 21:05:38.000000000 +0100

 +++ newlib-1.17.0-new/newlib/libc/include/machine/ieeefp.h	2009-05-22 09:57:49.000000000 +0200

 @@ -275,6 +275,10 @@

  #define _DOUBLE_IS_32BITS

  #endif

 +#ifdef __AVR32__

 +#define __IEEE_BIG_ENDIAN

 +#endif

 +

  #if defined(__or32__) || defined(__or1k__) || defined(__or16__)

  #define __IEEE_BIG_ENDIAN

  #endif

 diff -Naur newlib-1.17.0/newlib/libc/include/machine/setjmp.h newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h

 --- newlib-1.17.0/newlib/libc/include/machine/setjmp.h	2008-12-11 21:05:38.000000000 +0100

 +++ newlib-1.17.0-new/newlib/libc/include/machine/setjmp.h	2009-05-22 09:57:49.000000000 +0200

 @@ -13,6 +13,13 @@

  #define _JBLEN 24

  #endif

 +#if defined(__AVR32__)

 +/*

 +  r0-r7, lr, sp

 + */

 +#define _JBLEN 10

 +#endif

 +

  #ifdef __sparc__

  /*

   * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext).

 diff -Naur newlib-1.17.0/newlib/libc/include/machine/time.h newlib-1.17.0-new/newlib/libc/include/machine/time.h

 --- newlib-1.17.0/newlib/libc/include/machine/time.h	2000-12-04 20:06:37.000000000 +0100

 +++ newlib-1.17.0-new/newlib/libc/include/machine/time.h	2009-05-22 09:57:49.000000000 +0200

 @@ -6,6 +6,10 @@

  #else  /* !__rtems__ */

  #if defined(__arm__) || defined(__thumb__)

  #define _CLOCKS_PER_SEC_ 100

 +#else

 +#if defined(__AVR32__)

 +#define _CLOCKS_PER_SEC_ 1000000

 +#endif

  #endif

  #endif /* !__rtems__ */

 diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4 newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4

 --- newlib-1.17.0/newlib/libc/machine/avr32/aclocal.m4	1970-01-01 01:00:00.000000000 +0100

 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/aclocal.m4	2009-05-22 09:57:49.000000000 +0200

 @@ -0,0 +1,382 @@

 +dnl aclocal.m4 generated automatically by aclocal 1.4-p6

 +

 +dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.

 +dnl This file is free software; the Free Software Foundation

 +dnl gives unlimited permission to copy and/or distribute it,

 +dnl with or without modifications, as long as this notice is preserved.

 +

 +dnl This program is distributed in the hope that it will be useful,

 +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without

 +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A

 +dnl PARTICULAR PURPOSE.

 +

 +dnl This provides configure definitions used by all the newlib

 +dnl configure.in files.

 +

 +dnl Basic newlib configury.  This calls basic introductory stuff,

 +dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs

 +dnl configure.host.  The only argument is the relative path to the top

 +dnl newlib directory.

 +

 +AC_DEFUN(NEWLIB_CONFIGURE,

 +[

 +dnl Default to --enable-multilib

 +AC_ARG_ENABLE(multilib,

 +[  --enable-multilib         build many library versions (default)],

 +[case "${enableval}" in

 +  yes) multilib=yes ;;

 +  no)  multilib=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;

 + esac], [multilib=yes])dnl

 +

 +dnl Support --enable-target-optspace

 +AC_ARG_ENABLE(target-optspace,

 +[  --enable-target-optspace  optimize for space],

 +[case "${enableval}" in

 +  yes) target_optspace=yes ;;

 +  no)  target_optspace=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;

 + esac], [target_optspace=])dnl

 +

 +dnl Support --enable-malloc-debugging - currently only supported for Cygwin

 +AC_ARG_ENABLE(malloc-debugging,

 +[  --enable-malloc-debugging indicate malloc debugging requested],

 +[case "${enableval}" in

 +  yes) malloc_debugging=yes ;;

 +  no)  malloc_debugging=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;

 + esac], [malloc_debugging=])dnl

 +

 +dnl Support --enable-newlib-mb

 +AC_ARG_ENABLE(newlib-mb,

 +[  --enable-newlib-mb        enable multibyte support],

 +[case "${enableval}" in

 +  yes) newlib_mb=yes ;;

 +  no)  newlib_mb=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;

 + esac], [newlib_mb=])dnl

 +

 +dnl Support --enable-newlib-iconv

 +AC_ARG_ENABLE(newlib-iconv,

 +[  --enable-newlib-iconv     enable iconv library support],

 +[case "${enableval}" in

 +  yes) newlib_iconv=yes ;;

 +  no)  newlib_iconv=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;;

 + esac], [newlib_iconv=])dnl

 +

 +dnl Support --enable-newlib-builtin-converters

 +AC_ARG_ENABLE(newlib-builtin-converters,

 +[  --enable-newlib-builtin-converters   enable specific comma-separated list of iconv converters to be built-in],

 +[if test x${enableval} = x; then

 +   AC_MSG_ERROR(bad value ${enableval} for newlib-builtin-converters option - use comma-separated list)

 + fi

 + builtin_converters=${enableval}

 + ], [builtin_converters=])dnl

 +

 +dnl Support --enable-newlib-multithread

 +AC_ARG_ENABLE(newlib-multithread,

 +[  --enable-newlib-multithread        enable support for multiple threads],

 +[case "${enableval}" in

 +  yes) newlib_multithread=yes ;;

 +  no)  newlib_multithread=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;

 + esac], [newlib_multithread=yes])dnl

 +

 +dnl Support --enable-newlib-elix-level

 +AC_ARG_ENABLE(newlib-elix-level,

 +[  --enable-newlib-elix-level         supply desired elix library level (1-4)],

 +[case "${enableval}" in

 +  0)   newlib_elix_level=0 ;;

 +  1)   newlib_elix_level=1 ;;

 +  2)   newlib_elix_level=2 ;;

 +  3)   newlib_elix_level=3 ;;

 +  4)   newlib_elix_level=4 ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;

 + esac], [newlib_elix_level=0])dnl

 +

 +dnl Support --disable-newlib-io-float

 +AC_ARG_ENABLE(newlib-io-float,

 +[  --disable-newlib-io-float disable printf/scanf family float support],

 +[case "${enableval}" in

 +  yes) newlib_io_float=yes ;;

 +  no)  newlib_io_float=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;

 + esac], [newlib_io_float=yes])dnl

 +

 +dnl Support --disable-newlib-supplied-syscalls

 +AC_ARG_ENABLE(newlib-supplied-syscalls,

 +[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],

 +[case "${enableval}" in

 +  yes) newlib_may_supply_syscalls=yes ;;

 +  no)  newlib_may_supply_syscalls=no ;;

 +  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;

 + esac], [newlib_may_supply_syscalls=yes])dnl

 +

 +AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)

 +

 +dnl We may get other options which we don't document:

 +dnl --with-target-subdir, --with-multisrctop, --with-multisubdir

 +

 +test -z "[$]{with_target_subdir}" && with_target_subdir=.

 +

 +if test "[$]{srcdir}" = "."; then

 +  if test "[$]{with_target_subdir}" != "."; then

 +    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"

 +  else

 +    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"

 +  fi

 +else

 +  newlib_basedir="[$]{srcdir}/$1"

 +fi

 +AC_SUBST(newlib_basedir)

 +

 +AC_CANONICAL_SYSTEM

 +

 +AM_INIT_AUTOMAKE(newlib, 1.12.0)

 +

 +# FIXME: We temporarily define our own version of AC_PROG_CC.  This is

 +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We

 +# are probably using a cross compiler, which will not be able to fully

 +# link an executable.  This should really be fixed in autoconf

 +# itself.

 +

 +AC_DEFUN(LIB_AC_PROG_CC,

 +[AC_BEFORE([$0], [AC_PROG_CPP])dnl

 +AC_CHECK_PROG(CC, gcc, gcc)

 +if test -z "$CC"; then

 +  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)

 +  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])

 +fi

 +

 +AC_PROG_CC_GNU

 +

 +if test $ac_cv_prog_gcc = yes; then

 +  GCC=yes

 +dnl Check whether -g works, even if CFLAGS is set, in case the package

 +dnl plays around with CFLAGS (such as to build both debugging and

 +dnl normal versions of a library), tasteless as that idea is.

 +  ac_test_CFLAGS="${CFLAGS+set}"

 +  ac_save_CFLAGS="$CFLAGS"

 +  CFLAGS=

 +  AC_PROG_CC_G

 +  if test "$ac_test_CFLAGS" = set; then

 +    CFLAGS="$ac_save_CFLAGS"

 +  elif test $ac_cv_prog_cc_g = yes; then

 +    CFLAGS="-g -O2"

 +  else

 +    CFLAGS="-O2"

 +  fi

 +else

 +  GCC=

 +  test "${CFLAGS+set}" = set || CFLAGS="-g"

 +fi

 +])

 +

 +LIB_AC_PROG_CC

 +

 +AC_CHECK_TOOL(AS, as)

 +AC_CHECK_TOOL(AR, ar)

 +AC_CHECK_TOOL(RANLIB, ranlib, :)

 +

 +AC_PROG_INSTALL

 +

 +AM_MAINTAINER_MODE

 +

 +# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,

 +# at least currently, we never actually build a program, so we never

 +# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally

 +# fails, because we are probably configuring with a cross compiler

 +# which can't create executables.  So we include AC_EXEEXT to keep

 +# automake happy, but we don't execute it, since we don't care about

 +# the result.

 +if false; then

 +  AC_EXEEXT

 +fi

 +

 +. [$]{newlib_basedir}/configure.host

 +

 +newlib_cflags="[$]{newlib_cflags} -fno-builtin"

 +

 +NEWLIB_CFLAGS=${newlib_cflags}

 +AC_SUBST(NEWLIB_CFLAGS)

 +

 +LDFLAGS=${ldflags}

 +AC_SUBST(LDFLAGS)

 +

 +AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)

 +AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)

 +AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)

 +AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)

 +AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)

 +

 +AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)

 +

 +# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we

 +# use oext, which is set in configure.host based on the target platform.

 +OBJEXT=${oext}

 +

 +AC_SUBST(OBJEXT)

 +AC_SUBST(oext)

 +AC_SUBST(aext)

 +

 +AC_SUBST(libm_machine_dir)

 +AC_SUBST(machine_dir)

 +AC_SUBST(sys_dir)

 +])

 +

 +# Do all the work for Automake.  This macro actually does too much --

 +# some checks are only needed if your package does certain things.

 +# But this isn't really a big deal.

 +

 +# serial 1

 +

 +dnl Usage:

 +dnl AM_INIT_AUTOMAKE(package,version, [no-define])

 +

 +AC_DEFUN([AM_INIT_AUTOMAKE],

 +[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl

 +AC_REQUIRE([AC_PROG_INSTALL])

 +PACKAGE=[$1]

 +AC_SUBST(PACKAGE)

 +VERSION=[$2]

 +AC_SUBST(VERSION)

 +dnl test to see if srcdir already configured

 +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then

 +  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])

 +fi

 +ifelse([$3],,

 +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])

 +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))

 +AC_REQUIRE([AM_SANITY_CHECK])

 +AC_REQUIRE([AC_ARG_PROGRAM])

 +dnl FIXME This is truly gross.

 +missing_dir=`cd $ac_aux_dir && pwd`

 +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)

 +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)

 +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)

 +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)

 +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)

 +AC_REQUIRE([AC_PROG_MAKE_SET])])

 +

 +# Copyright 2002  Free Software Foundation, Inc.

 +

 +# This program is free software; you can redistribute it and/or modify

 +# it under the terms of the GNU General Public License as published by

 +# the Free Software Foundation; either version 2, or (at your option)

 +# any later version.

 +

 +# This program is distributed in the hope that it will be useful,

 +# but WITHOUT ANY WARRANTY; without even the implied warranty of

 +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 +# GNU General Public License for more details.

 +

 +# You should have received a copy of the GNU General Public License

 +# along with this program; if not, write to the Free Software

 +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA

 +

 +# AM_AUTOMAKE_VERSION(VERSION)

 +# ----------------------------

 +# Automake X.Y traces this macro to ensure aclocal.m4 has been

 +# generated from the m4 files accompanying Automake X.Y.

 +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])

 +

 +# AM_SET_CURRENT_AUTOMAKE_VERSION

 +# -------------------------------

 +# Call AM_AUTOMAKE_VERSION so it can be traced.

 +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.

 +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],

 +	 [AM_AUTOMAKE_VERSION([1.4-p6])])

 +

 +#

 +# Check to make sure that the build environment is sane.

 +#

 +

 +AC_DEFUN([AM_SANITY_CHECK],

 +[AC_MSG_CHECKING([whether build environment is sane])

 +# Just in case

 +sleep 1

 +echo timestamp > conftestfile

 +# Do `set' in a subshell so we don't clobber the current shell's

 +# arguments.  Must try -L first in case configure is actually a

 +# symlink; some systems play weird games with the mod time of symlinks

 +# (eg FreeBSD returns the mod time of the symlink's containing

 +# directory).

 +if (

 +   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`

 +   if test "[$]*" = "X"; then

 +      # -L didn't work.

 +      set X `ls -t $srcdir/configure conftestfile`

 +   fi

 +   if test "[$]*" != "X $srcdir/configure conftestfile" \

 +      && test "[$]*" != "X conftestfile $srcdir/configure"; then

 +

 +      # If neither matched, then we have a broken ls.  This can happen

 +      # if, for instance, CONFIG_SHELL is bash and it inherits a

 +      # broken ls alias from the environment.  This has actually

 +      # happened.  Such a system could not be considered "sane".

 +      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken

 +alias in your environment])

 +   fi

 +

 +   test "[$]2" = conftestfile

 +   )

 +then

 +   # Ok.

 +   :

 +else

 +   AC_MSG_ERROR([newly created file is older than distributed files!

 +Check your system clock])

 +fi

 +rm -f conftest*

 +AC_MSG_RESULT(yes)])

 +

 +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)

 +dnl The program must properly implement --version.

 +AC_DEFUN([AM_MISSING_PROG],

 +[AC_MSG_CHECKING(for working $2)

 +# Run test in a subshell; some versions of sh will print an error if

 +# an executable is not found, even if stderr is redirected.

 +# Redirect stdin to placate older versions of autoconf.  Sigh.

 +if ($2 --version) < /dev/null > /dev/null 2>&1; then

 +   $1=$2

 +   AC_MSG_RESULT(found)

 +else

 +   $1="$3/missing $2"

 +   AC_MSG_RESULT(missing)

 +fi

 +AC_SUBST($1)])

 +

 +# Define a conditional.

 +

 +AC_DEFUN([AM_CONDITIONAL],

 +[AC_SUBST($1_TRUE)

 +AC_SUBST($1_FALSE)

 +if $2; then

 +  $1_TRUE=

 +  $1_FALSE='#'

 +else

 +  $1_TRUE='#'

 +  $1_FALSE=

 +fi])

 +

 +# Add --enable-maintainer-mode option to configure.

 +# From Jim Meyering

 +

 +# serial 1

 +

 +AC_DEFUN([AM_MAINTAINER_MODE],

 +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])

 +  dnl maintainer-mode is disabled by default

 +  AC_ARG_ENABLE(maintainer-mode,

 +[  --enable-maintainer-mode enable make rules and dependencies not useful

 +                          (and sometimes confusing) to the casual installer],

 +      USE_MAINTAINER_MODE=$enableval,

 +      USE_MAINTAINER_MODE=no)

 +  AC_MSG_RESULT($USE_MAINTAINER_MODE)

 +  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)

 +  MAINT=$MAINTAINER_MODE_TRUE

 +  AC_SUBST(MAINT)dnl

 +]

 +)

 +

 diff -Naur newlib-1.17.0/newlib/libc/machine/avr32/configure newlib-1.17.0-new/newlib/libc/machine/avr32/configure

 --- newlib-1.17.0/newlib/libc/machine/avr32/configure	1970-01-01 01:00:00.000000000 +0100

 +++ newlib-1.17.0-new/newlib/libc/machine/avr32/configure	2009-05-22 09:57:49.000000000 +0200

 @@ -0,0 +1,3950 @@

 +#! /bin/sh

 +# Guess values for system-dependent variables and create Makefiles.

 +# Generated by GNU Autoconf 2.61 for newlib NEWLIB_VERSION.

 +#

 +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,

 +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.

 +# This configure script is free software; the Free Software Foundation

 +# gives unlimited permission to copy, distribute and modify it.

 +## --------------------- ##

 +## M4sh Initialization.  ##

 +## --------------------- ##

 +

 +# Be more Bourne compatible

 +DUALCASE=1; export DUALCASE # for MKS sh

 +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then

 +  emulate sh

 +  NULLCMD=:

 +  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which

 +  # is contrary to our usage.  Disable this feature.

 +  alias -g '${1+"$@"}'='"$@"'

 +  setopt NO_GLOB_SUBST

 +else

 +  case `(set -o) 2>/dev/null` in

 +  *posix*) set -o posix ;;

 +esac

 +

 +fi

 +

 +

 +

 +

 +# PATH needs CR

 +# Avoid depending upon Character Ranges.

 +as_cr_letters='abcdefghijklmnopqrstuvwxyz'

 +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'

 +as_cr_Letters=$as_cr_letters$as_cr_LETTERS

 +as_cr_digits='0123456789'

 +as_cr_alnum=$as_cr_Letters$as_cr_digits

 +

 +# The user is always right.

 +if test "${PATH_SEPARATOR+set}" != set; then

 +  echo "#! /bin/sh" >conf$$.sh

 +  echo  "exit 0"   >>conf$$.sh

 +  chmod +x conf$$.sh

 +  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then

 +    PATH_SEPARATOR=';'

 +  else

 +    PATH_SEPARATOR=:

 +  fi

 +  rm -f conf$$.sh

 +fi

 +

 +# Support unset when possible.

 +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then

 +  as_unset=unset

 +else

 +  as_unset=false

 +fi

 +

 +

 +# IFS

 +# We need space, tab and new line, in precisely that order.  Quoting is

 +# there to prevent editors from complaining about space-tab.

 +# (If _AS_PATH_WALK were called with IFS unset, it would disable word

 +# splitting by setting IFS to empty value.)

 +as_nl='

 +'

 +IFS=" ""	$as_nl"

 +

 +# Find who we are.  Look in the path if we contain no directory separator.

 +case $0 in

 +  *[\\/]* ) as_myself=$0 ;;

 +  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

 +for as_dir in $PATH

 +do

 +  IFS=$as_save_IFS

 +  test -z "$as_dir" && as_dir=.

 +  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break

 +done

 +IFS=$as_save_IFS

 +

 +     ;;

 +esac

 +# We did not find ourselves, most probably we were run as `sh COMMAND'

 +# in which case we are not to be found in the path.

 +if test "x$as_myself" = x; then

 +  as_myself=$0

 +fi

 +if test ! -f "$as_myself"; then

 +  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2

 +  { (exit 1); exit 1; }

 +fi

 +

 +# Work around bugs in pre-3.0 UWIN ksh.

 +for as_var in ENV MAIL MAILPATH

 +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var

 +done

 +PS1='$ '

 +PS2='> '

 +PS4='+ '

 +

 +# NLS nuisances.

 +for as_var in \

 +  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \

 +  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \

 +  LC_TELEPHONE LC_TIME

 +do

 +  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then

 +    eval $as_var=C; export $as_var

 +  else

 +    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var

 +  fi

 +done

 +

 +# Required to use basename.

 +if expr a : '\(a\)' >/dev/null 2>&1 &&

 +   test "X`expr 00001 : '.*\(...\)'`" = X001; then

 +  as_expr=expr

 +else

 +  as_expr=false

 +fi

 +

 +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then

 +  as_basename=basename

 +else

 +  as_basename=false

 +fi

 +

 +

 +# Name of the executable.

 +as_me=`$as_basename -- "$0" ||

 +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \

 +	 X"$0" : 'X\(//\)$' \| \

 +	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||

 +echo X/"$0" |

 +    sed '/^.*\/\([^/][^/]*\)\/*$/{

 +	    s//\1/

 +	    q

 +	  }

 +	  /^X\/\(\/\/\)$/{

 +	    s//\1/

 +	    q

 +	  }

 +	  /^X\/\(\/\).*/{

 +	    s//\1/

 +	    q

 +	  }

 +	  s/.*/./; q'`

 +

 +# CDPATH.

 +$as_unset CDPATH

 +

 +

 +if test "x$CONFIG_SHELL" = x; then

 +  if (eval ":") 2>/dev/null; then

 +  as_have_required=yes

 +else

 +  as_have_required=no

 +fi

 +

 +  if test $as_have_required = yes && 	 (eval ":

 +(as_func_return () {

 +  (exit \$1)

 +}

 +as_func_success () {

 +  as_func_return 0

 +}

 +as_func_failure () {

 +  as_func_return 1

 +}

 +as_func_ret_success () {

 +  return 0

 +}

 +as_func_ret_failure () {

 +  return 1

 +}

 +

 +exitcode=0

 +if as_func_success; then

 +  :

 +else

 +  exitcode=1

 +  echo as_func_success failed.

 +fi

 +

 +if as_func_failure; then

 +  exitcode=1

 +  echo as_func_failure succeeded.

 +fi

 +

 +if as_func_ret_success; then

 +  :

 +else

 +  exitcode=1

 +  echo as_func_ret_success failed.

 +fi

 +

 +if as_func_ret_failure; then

 +  exitcode=1

 +  echo as_func_ret_failure succeeded.

 +fi

 +

 +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then

 +  :

 +else

 +  exitcode=1

 +  echo positional parameters were not saved.

 +fi

 +

 +test \$exitcode = 0) || { (exit 1); exit 1; }

 +

 +(

 +  as_lineno_1=\$LINENO

 +  as_lineno_2=\$LINENO

 +  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&

 +  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }

 +") 2> /dev/null; then

 +  :

 +else

 +  as_candidate_shells=

 +    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

 +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH

 +do

 +  IFS=$as_save_IFS

 +  test -z "$as_dir" && as_dir=.

 +  case $as_dir in

 +	 /*)

 +	   for as_base in sh bash ksh sh5; do

 +	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"

 +	   done;;

 +       esac

 +done

 +IFS=$as_save_IFS

 +

 +

 +      for as_shell in $as_candidate_shells $SHELL; do

 +	 # Try only shells that exist, to save several forks.

 +	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&

 +		{ ("$as_shell") 2> /dev/null <<\_ASEOF

 +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then

 +  emulate sh

 +  NULLCMD=:

 +  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which

 +  # is contrary to our usage.  Disable this feature.

 +  alias -g '${1+"$@"}'='"$@"'

 +  setopt NO_GLOB_SUBST

 +else

 +  case `(set -o) 2>/dev/null` in

 +  *posix*) set -o posix ;;

 +esac

 +

 +fi

 +

 +

 +:

 +_ASEOF

 +}; then

 +  CONFIG_SHELL=$as_shell

 +	       as_have_required=yes

 +	       if { "$as_shell" 2> /dev/null <<\_ASEOF

 +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then

 +  emulate sh

 +  NULLCMD=:

 +  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which

 +  # is contrary to our usage.  Disable this feature.

 +  alias -g '${1+"$@"}'='"$@"'

 +  setopt NO_GLOB_SUBST

 +else

 +  case `(set -o) 2>/dev/null` in

 +  *posix*) set -o posix ;;

 +esac

 +

 +fi

 +

 +

 +:

 +(as_func_return () {

 +  (exit $1)

 +}

 +as_func_success () {

 +  as_func_return 0

 +}

 +as_func_failure () {

 +  as_func_return 1

 +}

 +as_func_ret_success () {

 +  return 0

 +}

 +as_func_ret_failure () {

 +  return 1

 +}

 +

 +exitcode=0

 +if as_func_success; then

 +  :

 +else

 +  exitcode=1

 +  echo as_func_success failed.

 +fi

 +

 +if as_func_failure; then

 +  exitcode=1

 +  echo as_func_failure succeeded.

 +fi

 +

 +if as_func_ret_success; then

 +  :

 +else

 +  exitcode=1

 +  echo as_func_ret_success failed.

 +fi

 +

 +if as_func_ret_failure; then

 +  exitcode=1

 +  echo as_func_ret_failure succeeded.

 +fi

 +

 +if ( set x; as_func_ret_success y && test x = "$1" ); then

 +  :

 +else

 +  exitcode=1

 +  echo positional parameters were not saved.

 +fi

 +

 +test $exitcode = 0) || { (exit 1); exit 1; }

 +

 +(

 +  as_lineno_1=$LINENO

 +  as_lineno_2=$LINENO

 +  test "x$as_lineno_1" != "x$as_lineno_2" &&

 +  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }

 +

 +_ASEOF

 +}; then

 +  break

 +fi

 +

 +fi

 +

 +      done

 +

 +      if test "x$CONFIG_SHELL" != x; then

 +  for as_var in BASH_ENV ENV

 +        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var

 +        done

 +        export CONFIG_SHELL

 +        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}

 +fi

 +

 +

 +    if test $as_have_required = no; then

 +  echo This script requires a shell more modern than all the

 +      echo shells that I found on your system.  Please install a

 +      echo modern shell, or manually run the script under such a

 +      echo shell if you do have one.

 +      { (exit 1); exit 1; }

 +fi

 +

 +

 +fi

 +

 +fi

 +

 +

 +

 +(eval "as_func_return () {

 +  (exit \$1)

 +}

 +as_func_success () {

 +  as_func_return 0

 +}

 +as_func_failure () {

 +  as_func_return 1

 +}

 +as_func_ret_success () {

 +  return 0

 +}

 +as_func_ret_failure () {

 +  return 1

 +}

 +

 +exitcode=0

 +if as_func_success; then

 +  :

 +else

 +  exitcode=1

 +  echo as_func_success failed.

 +fi

 +

 +if as_func_failure; then

 +  exitcode=1

 +  echo as_func_failure succeeded.

 +fi

 +

 +if as_func_ret_success; then

 +  :

 +else

 +  exitcode=1

 +  echo as_func_ret_success failed.

 +fi

 +

 +if as_func_ret_failure; then

 +  exitcode=1

 +  echo as_func_ret_failure succeeded.

 +fi

 +

 +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then

 +  :

 +else

 +  exitcode=1

 +  echo positional parameters were not saved.

 +fi

 +

 +test \$exitcode = 0") || {

 +  echo No shell found that supports shell functions.

 +  echo Please tell autoconf@gnu.org about your system,

 +  echo including any error possibly output before this

 +  echo message

 +}

 +

 +

 +

 +  as_lineno_1=$LINENO

 +  as_lineno_2=$LINENO

 +  test "x$as_lineno_1" != "x$as_lineno_2" &&

 +  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {

 +

 +  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO

 +  # uniformly replaced by the line number.  The first 'sed' inserts a

 +  # line-number line after each line using $LINENO; the second 'sed'

 +  # does the real work.  The second script uses 'N' to pair each

 +  # line-number line with the line containing $LINENO, and appends

 +  # trailing '-' during substitution so that $LINENO is not a special

 +  # case at line end.

 +  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the

 +  # scripts with optimization help from Paolo Bonzini.  Blame Lee

 +  # E. McMahon (1931-1989) for sed's syntax.  :-)

 +  sed -n '

 +    p

 +    /[$]LINENO/=

 +  ' <$as_myself |

 +    sed '

 +      s/[$]LINENO.*/&-/

 +      t lineno

 +      b

 +      :lineno

 +      N

 +      :loop

 +      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/

 +      t loop

 +      s/-\n.*//

 +    ' >$as_me.lineno &&

 +  chmod +x "$as_me.lineno" ||

 +    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2

 +   { (exit 1); exit 1; }; }

 +

 +  # Don't try to exec as it changes $[0], causing all sort of problems

 +  # (the dirname of $[0] is not the place where we might find the

 +  # original and so on.  Autoconf is especially sensitive to this).

 +  . "./$as_me.lineno"

 +  # Exit status is that of the last command.

 +  exit

 +}

 +

 +

 +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then

 +  as_dirname=dirname

 +else

 +  as_dirname=false

 +fi

 +

 +ECHO_C= ECHO_N= ECHO_T=

 +case `echo -n x` in

 +-n*)

 +  case `echo 'x\c'` in

 +  *c*) ECHO_T='	';;	# ECHO_T is single tab character.

 +  *)   ECHO_C='\c';;

 +  esac;;

 +*)

 +  ECHO_N='-n';;

 +esac

 +

 +if expr a : '\(a\)' >/dev/null 2>&1 &&

 +   test "X`expr 00001 : '.*\(...\)'`" = X001; then

 +  as_expr=expr

 +else

 +  as_expr=false

 +fi

 +

 +rm -f conf$$ conf$$.exe conf$$.file

 +if test -d conf$$.dir; then

 +  rm -f conf$$.dir/conf$$.file

 +else

 +  rm -f conf$$.dir

 +  mkdir conf$$.dir

 +fi

 +echo >conf$$.file

 +if ln -s conf$$.file conf$$ 2>/dev/null; then

 +  as_ln_s='ln -s'

 +  # ... but there are two gotchas:

 +  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.

 +  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.

 +  # In both cases, we have to default to `cp -p'.

 +  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||

 +    as_ln_s='cp -p'

 +elif ln conf$$.file conf$$ 2>/dev/null; then

 +  as_ln_s=ln

 +else

 +  as_ln_s='cp -p'

 +fi

 +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file

 +rmdir conf$$.dir 2>/dev/null

 +

 +if mkdir -p . 2>/dev/null; then

 +  as_mkdir_p=:

 +else

 +  test -d ./-p && rmdir ./-p

 +  as_mkdir_p=false

 +fi

 +

 +if test -x / >/dev/null 2>&1; then

 +  as_test_x='test -x'

 +else

 +  if ls -dL / >/dev/null 2>&1; then

 +    as_ls_L_option=L

 +  else

 +    as_ls_L_option=

 +  fi

 +  as_test_x='

 +    eval sh -c '\''

 +      if test -d "$1"; then

 +        test -d "$1/.";

 +      else

 +	case $1 in

 +        -*)set "./$1";;

 +	esac;

 +	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in

 +	???[sx]*):;;*)false;;esac;fi

 +    '\'' sh

 +  '

 +fi

 +as_executable_p=$as_test_x

 +

 +# Sed expression to map a string onto a valid CPP name.

 +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

 +

 +# Sed expression to map a string onto a valid variable name.

 +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"

 +

 +

 +

 +exec 7<&0 </dev/null 6>&1

 +

 +# Name of the host.

 +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,

 +# so uname gets run too.

 +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`

 +

 +#

 +# Initializations.

 +#

 +ac_default_prefix=/usr/local

 +ac_clean_files=

 +ac_config_libobj_dir=.

 +LIBOBJS=

 +cross_compiling=no

 +subdirs=

 +MFLAGS=

 +MAKEFLAGS=

 +SHELL=${CONFIG_SHELL-/bin/sh}

 +

 +# Identity of this package.

 +PACKAGE_NAME='newlib'

 +PACKAGE_TARNAME='newlib'

 +PACKAGE_VERSION='NEWLIB_VERSION'

 +PACKAGE_STRING='newlib NEWLIB_VERSION'

 +PACKAGE_BUGREPORT=''

 +

 +ac_unique_file="Makefile.am"

 +ac_subst_vars='SHELL

 +PATH_SEPARATOR

 +PACKAGE_NAME

 +PACKAGE_TARNAME

 +PACKAGE_VERSION

 +PACKAGE_STRING

 +PACKAGE_BUGREPORT

 +exec_prefix

 +prefix

 +program_transform_name

 +bindir

 +sbindir

 +libexecdir

 +datarootdir

 +datadir

 +sysconfdir

 +sharedstatedir

 +localstatedir

 +includedir

 +oldincludedir

 +docdir

 +infodir

 +htmldir

 +dvidir

 +pdfdir

 +psdir

 +libdir

 +localedir

 +mandir

 +DEFS

 +ECHO_C

 +ECHO_N

 +ECHO_T

 +LIBS

 +build_alias

 +host_alias

 +target_alias

 +MAY_SUPPLY_SYSCALLS_TRUE

 +MAY_SUPPLY_SYSCALLS_FALSE

 +newlib_basedir

 +build

 +build_cpu

 +build_vendor

 +build_os

 +host

 +host_cpu

 +host_vendor

 +host_os

 +target

 +target_cpu

 +target_vendor

 +target_os

 +INSTALL_PROGRAM

 +INSTALL_SCRIPT

 +INSTALL_DATA

 +PACKAGE

 +VERSION

 +ACLOCAL

 +AUTOCONF

 +AUTOMAKE

 +AUTOHEADER

 +MAKEINFO

 +SET_MAKE

 +CC

 +AS

 +AR

 +RANLIB

 +MAINTAINER_MODE_TRUE

 +MAINTAINER_MODE_FALSE

 +MAINT

 +NEWLIB_CFLAGS

 +LDFLAGS

 +ELIX_LEVEL_0_TRUE

 +ELIX_LEVEL_0_FALSE

 +ELIX_LEVEL_1_TRUE

 +ELIX_LEVEL_1_FALSE

 +ELIX_LEVEL_2_TRUE

 +ELIX_LEVEL_2_FALSE

 +ELIX_LEVEL_3_TRUE

 +ELIX_LEVEL_3_FALSE

 +ELIX_LEVEL_4_TRUE

 +ELIX_LEVEL_4_FALSE

 +USE_LIBTOOL_TRUE

 +USE_LIBTOOL_FALSE

 +OBJEXT

 +oext

 +aext

 +libm_machine_dir

 +machine_dir

 +sys_dir

 +LIBOBJS

 +LTLIBOBJS'

 +ac_subst_files=''

 +      ac_precious_vars='build_alias

 +host_alias

 +target_alias'

 +

 +

 +# Initialize some variables set by options.

 +ac_init_help=

 +ac_init_version=false

 +# The variables have the same names as the options, with

 +# dashes changed to underlines.

 +cache_file=/dev/null

 +exec_prefix=NONE

 +no_create=

 +no_recursion=

 +prefix=NONE

 +program_prefix=NONE

 +program_suffix=NONE

 +program_transform_name=s,x,x,

 +silent=

 +site=

 +srcdir=

 +verbose=

 +x_includes=NONE

 +x_libraries=NONE

 +

 +# Installation directory options.

 +# These are left unexpanded so users can "make install exec_prefix=/foo"

 +# and all the variables that are supposed to be based on exec_prefix

 +# by default will actually change.

 +# Use braces instead of parens because sh, perl, etc. also accept them.

 +# (The list follows the same order as the GNU Coding Standards.)

 +bindir='${exec_prefix}/bin'

 +sbindir='${exec_prefix}/sbin'

 +libexecdir='${exec_prefix}/libexec'

 +datarootdir='${prefix}/share'

 +datadir='${datarootdir}'

 +sysconfdir='${prefix}/etc'

 +sharedstatedir='${prefix}/com'

 +localstatedir='${prefix}/var'

 +includedir='${prefix}/include'

 +oldincludedir='/usr/include'

 +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'

 +infodir='${datarootdir}/info'

 +htmldir='${docdir}'

 +dvidir='${docdir}'

 +pdfdir='${docdir}'

 +psdir='${docdir}'

 +libdir='${exec_prefix}/lib'

 +localedir='${datarootdir}/locale'

 +mandir='${datarootdir}/man'

 +

 +ac_prev=

 +ac_dashdash=

 +for ac_option

 +do

 +  # If the previous option needs an argument, assign it.

 +  if test -n "$ac_prev"; then

 +    eval $ac_prev=\$ac_option

 +    ac_prev=

 +    continue

 +  fi

 +

 +  case $ac_option in

 +  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;

 +  *)	ac_optarg=yes ;;

 +  esac

 +

 +  # Accept the important Cygnus configure options, so we can diagnose typos.

 +

 +  case $ac_dashdash$ac_option in

 +  --)

 +    ac_dashdash=yes ;;

 +

 +  -bindir | --bindir | --bindi | --bind | --bin | --bi)

 +    ac_prev=bindir ;;

 +  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)

 +    bindir=$ac_optarg ;;

 +

 +  -build | --build | --buil | --bui | --bu)

 +    ac_prev=build_alias ;;

 +  -build=* | --build=* | --buil=* | --bui=* | --bu=*)

 +    build_alias=$ac_optarg ;;

 +

 +  -cache-file | --cache-file | --cache-fil | --cache-fi \

 +  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)

 +    ac_prev=cache_file ;;

 +  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \

 +  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)

 +    cache_file=$ac_optarg ;;

 +

 +  --config-cache | -C)

 +    cache_file=config.cache ;;

 +

 +  -datadir | --datadir | --datadi | --datad)

 +    ac_prev=datadir ;;

 +  -datadir=* | --datadir=* | --datadi=* | --datad=*)

 +    datadir=$ac_optarg ;;

 +

 +  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \

 +  | --dataroo | --dataro | --datar)

 +    ac_prev=datarootdir ;;

 +  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \

 +  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)

 +    datarootdir=$ac_optarg ;;

 +

 +  -disable-* | --disable-*)

 +    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`

 +    # Reject names that are not valid shell variable names.

 +    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&

 +      { echo "$as_me: error: invalid feature name: $ac_feature" >&2

 +   { (exit 1); exit 1; }; }

 +    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`

 +    eval enable_$ac_feature=no ;;

 +

 +  -docdir | --docdir | --docdi | --doc | --do)

 +    ac_prev=docdir ;;

 +  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)

 +    docdir=$ac_optarg ;;

 +

 +  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)

 +    ac_prev=dvidir ;;

 +  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)

 +    dvidir=$ac_optarg ;;

 +

 +  -enable-* | --enable-*)

 +    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`

 +    # Reject names that are not valid shell variable names.

 +    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&

 +      { echo "$as_me: error: invalid feature name: $ac_feature" >&2

 +   { (exit 1); exit 1; }; }

 +    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`

 +    eval enable_$ac_feature=\$ac_optarg ;;

 +

 +  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \

 +  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \

 +  | --exec | --exe | --ex)

 +    ac_prev=exec_prefix ;;

 +  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \

 +  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \

 +  | --exec=* | --exe=* | --ex=*)

 +    exec_prefix=$ac_optarg ;;

 +

 +  -gas | --gas | --ga | --g)

 +    # Obsolete; use --with-gas.

 +    with_gas=yes ;;

 +

 +  -help | --help | --hel | --he | -h)

 +    ac_init_help=long ;;

 +  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)

 +    ac_init_help=recursive ;;

 +  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)

 +    ac_init_help=short ;;

 +

 +  -host | --host | --hos | --ho)

 +    ac_prev=host_alias ;;

 +  -host=* | --host=* | --hos=* | --ho=*)

 +    host_alias=$ac_optarg ;;

 +

 +  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)

 +    ac_prev=htmldir ;;

 +  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \

 +  | --ht=*)

 +    htmldir=$ac_optarg ;;

 +

 +  -includedir | --includedir | --includedi | --included | --include \

 +  | --includ | --inclu | --incl | --inc)

 +    ac_prev=includedir ;;

 +  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \

 +  | --includ=* | --inclu=* | --incl=* | --inc=*)

 +    includedir=$ac_optarg ;;

 +

 +  -infodir | --infodir | --infodi | --infod | --info | --inf)

 +    ac_prev=infodir ;;

 +  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)

 +    infodir=$ac_optarg ;;

 +

 +  -libdir | --libdir | --libdi | --libd)

 +    ac_prev=libdir ;;

 +  -libdir=* | --libdir=* | --libdi=* | --libd=*)

 +    libdir=$ac_optarg ;;

 +

 +  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \

 +  | --libexe | --libex | --libe)

 +    ac_prev=libexecdir ;;

 +  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \

 +  | --libexe=* | --libex=* | --libe=*)

 +    libexecdir=$ac_optarg ;;

 +

 +  -localedir | --localedir | --localedi | --localed | --locale)

 +    ac_prev=localedir ;;

 +  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)

 +    localedir=$ac_optarg ;;

 +

 +  -localstatedir | --localstatedir | --localstatedi | --localstated \

 +  | --localstate | --localstat | --localsta | --localst | --locals)

 +    ac_prev=localstatedir ;;

 +  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \

 +  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)

 +    localstatedir=$ac_optarg ;;

 +

 +  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)

 +    ac_prev=mandir ;;

 +  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)

 +    mandir=$ac_optarg ;;

 +

 +  -nfp | --nfp | --nf)

 +    # Obsolete; use --without-fp.

 +    with_fp=no ;;

 +

 +  -no-create | --no-create | --no-creat | --no-crea | --no-cre \

 +  | --no-cr | --no-c | -n)

 +    no_create=yes ;;

 +

 +  -no-recursion | --no-recursion | --no-recursio | --no-recursi \

 +  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)

 +    no_recursion=yes ;;

 +

 +  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \

 +  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \

 +  | --oldin | --oldi | --old | --ol | --o)

 +    ac_prev=oldincludedir ;;

 +  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \

 +  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \

 +  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)

 +    oldincludedir=$ac_optarg ;;

 +

 +  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)

 +    ac_prev=prefix ;;

 +  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)

 +    prefix=$ac_optarg ;;

 +

 +  -program-prefix | --program-prefix | --program-prefi | --program-pref \

 +  | --program-pre | --program-pr | --program-p)

 +    ac_prev=program_prefix ;;

 +  -program-prefix=* | --program-prefix=* | --program-prefi=* \

 +  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)

 +    program_prefix=$ac_optarg ;;

 +

 +  -program-suffix | --program-suffix | --program-suffi | --program-suff \

 +  | --program-suf | --program-su | --program-s)

 +    ac_prev=program_suffix ;;

 +  -program-suffix=* | --program-suffix=* | --program-suffi=* \

 +  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)

 +    program_suffix=$ac_optarg ;;

 +

 +  -program-transform-name | --program-transform-name \

 +  | --program-transform-nam | --program-transform-na \

 +  | --program-transform-n | --program-transform- \

 +  | --program-transform | --program-transfor \

 +  | --program-transfo | --program-transf \

 +  | --program-trans | --program-tran \

 +  | --progr-tra | --program-tr | --program-t)

 +    ac_prev=program_transform_name ;;

 +  -program-transform-name=* | --program-transform-name=* \

 +  | --program-transform-nam=* | --program-transform-na=* \

 +  | --program-transform-n=* | --program-transform-=* \

 +  | --program-transform=* | --program-transfor=* \

 +  | --program-transfo=* | --program-transf=* \

 +  | --program-trans=* | --program-tran=* \

 +  | --progr-tra=* | --program-tr=* | --program-t=*)

 +    program_transform_name=$ac_optarg ;;

 +

 +  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)

 +    ac_prev=pdfdir ;;

 +  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)

 +    pdfdir=$ac_optarg ;;

 +

 +  -psdir | --psdir | --psdi | --psd | --ps)

 +    ac_prev=psdir ;;

 +  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)

 +    psdir=$ac_optarg ;;

 +

 +  -q | -quiet | --quiet | --quie | --qui | --qu | --q \

 +  | -silent | --silent | --silen | --sile | --sil)

 +    silent=yes ;;

 +

 +  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)

 +    ac_prev=sbindir ;;

 +  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \

 +  | --sbi=* | --sb=*)

 +    sbindir=$ac_optarg ;;

 +

 +  -sharedstatedir | --sharedstatedir | --sharedstatedi \

 +  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \

 +  | --sharedst | --shareds | --shared | --share | --shar \

 +  | --sha | --sh)

 +    ac_prev=sharedstatedir ;;

 +  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \

 +  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \

 +  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \

 +  | --sha=* | --sh=*)

 +    sharedstatedir=$ac_optarg ;;

 +

 +  -site | --site | --sit)

 +    ac_prev=site ;;

 +  -site=* | --site=* | --sit=*)

 +    site=$ac_optarg ;;

 +

 +  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)

 +    ac_prev=srcdir ;;

 +  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)

 +    srcdir=$ac_optarg ;;

 +

 +  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \

 +  | --syscon | --sysco | --sysc | --sys | --sy)

 +    ac_prev=sysconfdir ;;

 +  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \

 +  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)

 +    sysconfdir=$ac_optarg ;;

 +

 +  -target | --target | --targe | --targ | --tar | --ta | --t)

 +    ac_prev=target_alias ;;

 +  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)

 +    target_alias=$ac_optarg ;;

 +

 +  -v | -verbose | --verbose | --verbos | --verbo | --verb)

 +    verbose=yes ;;

 +

 +  -version | --version | --versio | --versi | --vers | -V)

 +    ac_init_version=: ;;

 +

 +  -with-* | --with-*)

 +    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`

 +    # Reject names that are not valid shell variable names.

 +    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&

 +      { echo "$as_me: error: invalid package name: $ac_package" >&2

 +   { (exit 1); exit 1; }; }

 +    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`

 +    eval with_$ac_package=\$ac_optarg ;;

 +

 +  -without-* | --without-*)

 +    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`

 +    # Reject names that are not valid shell variable names.

 +    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&

 +      { echo "$as_me: error: invalid package name: $ac_package" >&2

 +   { (exit 1); exit 1; }; }

 +    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`

 +    eval with_$ac_package=no ;;

 +

 +  --x)

 +    # Obsolete; use --with-x.

 +    with_x=yes ;;

 +

 +  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \

 +  | --x-incl | --x-inc | --x-in | --x-i)

 +    ac_prev=x_includes ;;

 +  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \

 +  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)

 +    x_includes=$ac_optarg ;;

 +

 +  -x-libraries | --x-libraries | --x-librarie | --x-librari \

 +  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)

 +    ac_prev=x_libraries ;;

 +  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \

 +  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)

 +    x_libraries=$ac_optarg ;;

 +

 +  -*) { echo "$as_me: error: unrecognized option: $ac_option

 +Try \`$0 --help' for more information." >&2

 +   { (exit 1); exit 1; }; }

 +    ;;

 +

 +  *=*)

 +    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`

 +    # Reject names that are not valid shell variable names.

 +    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&

 +      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2

 +   { (exit 1); exit 1; }; }

 +    eval $ac_envvar=\$ac_optarg

 +    export $ac_envvar ;;

 +

 +  *)

 +    # FIXME: should be removed in autoconf 3.0.

 +    echo "$as_me: WARNING: you should use --build, --host, --target" >&2

 +    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&

 +      echo "$as_me: WARNING: invalid host type: $ac_option" >&2

 +    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}

 +    ;;

 +

 +  esac

 +done

 +

 +if test -n "$ac_prev"; then

 +  ac_option=--`echo $ac_prev | sed 's/_/-/g'`

 +  { echo "$as_me: error: missing argument to $ac_option" >&2

 +   { (exit 1); exit 1; }; }

 +fi

 +

 +# Be sure to have absolute directory names.

 +for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \

 +		datadir sysconfdir sharedstatedir localstatedir includedir \

 +		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \

 +		libdir localedir mandir

 +do

 +  eval ac_val=\$$ac_var

 +  case $ac_val in

 +    [\\/$]* | ?:[\\/]* )  continue;;

 +    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;

 +  esac

 +  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2

 +   { (exit 1); exit 1; }; }

 +done

 +

 +# There might be people who depend on the old broken behavior: `$host'

 +# used to hold the argument of --host etc.

 +# FIXME: To remove some day.

 +build=$build_alias

 +host=$host_alias

 +target=$target_alias

 +

 +# FIXME: To remove some day.

 +if test "x$host_alias" != x; then

 +  if test "x$build_alias" = x; then

 +    cross_compiling=maybe

 +    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.

 +    If a cross compiler is detected then cross compile mode will be used." >&2

 +  elif test "x$build_alias" != "x$host_alias"; then

 +    cross_compiling=yes

 +  fi

 +fi

 +

 +ac_tool_prefix=

 +test -n "$host_alias" && ac_tool_prefix=$host_alias-

 +

 +test "$silent" = yes && exec 6>/dev/null

 +

 +

 +ac_pwd=`pwd` && test -n "$ac_pwd" &&

 +ac_ls_di=`ls -di .` &&

 +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||

 +  { echo "$as_me: error: Working directory cannot be determined" >&2

 +   { (exit 1); exit 1; }; }

 +test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||

 +  { echo "$as_me: error: pwd does not report name of working directory" >&2

 +   { (exit 1); exit 1; }; }

 +

 +

 +# Find the source files, if location was not specified.

 +if test -z "$srcdir"; then

 +  ac_srcdir_defaulted=yes

 +  # Try the directory containing this script, then the parent directory.

 +  ac_confdir=`$as_dirname -- "$0" ||

 +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \

 +	 X"$0" : 'X\(//\)[^/]' \| \

 +	 X"$0" : 'X\(//\)$' \| \

 +	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||

 +echo X"$0" |

 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{

 +	    s//\1/

 +	    q

 +	  }

 +	  /^X\(\/\/\)[^/].*/{

 +	    s//\1/

 +	    q

 +	  }

 +	  /^X\(\/\/\)$/{

 +	    s//\1/

 +	    q

 +	  }

 +	  /^X\(\/\).*/{

 +	    s//\1/

 +	    q

 +	  }

 +	  s/.*/./; q'`

 +  srcdir=$ac_confdir

 +  if test ! -r "$srcdir/$ac_unique_file"; then

 +    srcdir=..

 +  fi

 +else

 +  ac_srcdir_defaulted=no

 +fi

 +if test ! -r "$srcdir/$ac_unique_file"; then

 +  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."

 +  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2

 +   { (exit 1); exit 1; }; }

 +fi

 +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"

 +ac_abs_confdir=`(

 +	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2

 +   { (exit 1); exit 1; }; }

 +	pwd)`

 +# When building in place, set srcdir=.

 +if test "$ac_abs_confdir" = "$ac_pwd"; then

 +  srcdir=.

 +fi

 +# Remove unnecessary trailing slashes from srcdir.

 +# Double slashes in file names in object file debugging info

 +# mess up M-x gdb in Emacs.

 +case $srcdir in

 +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;

 +esac

 +for ac_var in $ac_precious_vars; do

 +  eval ac_env_${ac_var}_set=\${${ac_var}+set}

 +  eval ac_env_${ac_var}_value=\$${ac_var}

 +  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}

 +  eval ac_cv_env_${ac_var}_value=\$${ac_var}

 +done

 +

 +#

 +# Report the --help message.

 +#

 +if test "$ac_init_help" = "long"; then

 +  # Omit some internal or obsolete options to make the list less imposing.

 +  # This message is too long to be a string in the A/UX 3.1 sh.

 +  cat <<_ACEOF

 +\`configure' configures newlib NEWLIB_VERSION to adapt to many kinds of systems.

 +

 +Usage: $0 [OPTION]... [VAR=VALUE]...

 +

 +To assign environment variables (e.g., CC, CFLAGS...), specify them as

 +VAR=VALUE.  See below for descriptions of some of the useful variables.

 +

 +Defaults for the options are specified in brackets.

 +

 +Configuration:

 +  -h, --help              display this help and exit

 +      --help=short        display options specific to this package

 +      --help=recursive    display the short help of all the included packages

 +  -V, --version           display version information and exit

 +  -q, --quiet, --silent   do not print \`checking...' messages

 +      --cache-file=FILE   cache test results in FILE [disabled]

 +  -C, --config-cache      alias for \`--cache-file=config.cache'

 +  -n, --no-create         do not create output files

 +      --srcdir=DIR        find the sources in DIR [configure dir or \`..']

 +

 +Installation directories:

 +  --prefix=PREFIX         install architecture-independent files in PREFIX

 +			  [$ac_default_prefix]

 +  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX

 +			  [PREFIX]

 +

 +By default, \`make install' will install all the files in

 +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify

 +an installation prefix other than \`$ac_default_prefix' using \`--prefix',

 +for instance \`--prefix=\$HOME'.

 +

 +For better control, use the options below.

 +

 +Fine tuning of the installation directories:

 +  --bindir=DIR           user executables [EPREFIX/bin]

 +  --sbindir=DIR          system admin executables [EPREFIX/sbin]

 +  --libexecdir=DIR       program executables [EPREFIX/libexec]

 +  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]

 +  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]

 +  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]

 +  --libdir=DIR           object code libraries [EPREFIX/lib]

 +  --includedir=DIR       C header files [PREFIX/include]

 +  --oldincludedir=DIR    C header files for non-gcc [/usr/include]

 +  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]

 +  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]

 +  --infodir=DIR          info documentation [DATAROOTDIR/info]

 +  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]

 +  --mandir=DIR           man documentation [DATAROOTDIR/man]

 +  --docdir=DIR           documentation root [DATAROOTDIR/doc/newlib]

 +  --htmldir=DIR          html documentation [DOCDIR]

 +  --dvidir=DIR           dvi documentation [DOCDIR]

 +  --pdfdir=DIR           pdf documentation [DOCDIR]

 +  --psdir=DIR            ps documentation [DOCDIR]

 +_ACEOF

 +

 +  cat <<\_ACEOF

 +

 +Program names:

 +  --program-prefix=PREFIX            prepend PREFIX to installed program names

 +  --program-suffix=SUFFIX            append SUFFIX to installed program names

 +  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

 +

 +System types:

 +  --build=BUILD     configure for building on BUILD [guessed]

 +  --host=HOST       cross-compile to build programs to run on HOST [BUILD]

 +  --target=TARGET   configure for building compilers for TARGET [HOST]

 +_ACEOF

 +fi

 +

 +if test -n "$ac_init_help"; then

 +  case $ac_init_help in

 +     short | recursive ) echo "Configuration of newlib NEWLIB_VERSION:";;

 +   esac

 +  cat <<\_ACEOF

 +

 +Optional Features:

 +  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)

 +  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]

 +  --enable-multilib         build many library versions (default)

 +  --enable-target-optspace  optimize for space

 +  --enable-malloc-debugging indicate malloc debugging requested

 +  --enable-newlib-mb        enable multibyte support

 +  --enable-newlib-iconv     enable iconv library support

 +  --enable-newlib-builtin-converters   enable specific comma-separated list of iconv converters to be built-in

 +  --enable-newlib-multithread        enable support for multiple threads

 +  --enable-newlib-elix-level         supply desired elix library level (1-4)

 +  --disable-newlib-io-float disable printf/scanf family float support

 +  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls

 +  --enable-maintainer-mode enable make rules and dependencies not useful

 +                          (and sometimes confusing) to the casual installer

 +

 +_ACEOF

 +ac_status=$?

 +fi

 +

 +if test "$ac_init_help" = "recursive"; then

 +  # If there are subdirs, report their specific --help.

 +  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue

 +    test -d "$ac_dir" || continue

 +    ac_builddir=.

 +

 +case "$ac_dir" in

 +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;

 +*)

 +  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`

 +  # A ".." for each directory in $ac_dir_suffix.

 +  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`

 +  case $ac_top_builddir_sub in

 +  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;

 +  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;

 +  esac ;;

 +esac

 +ac_abs_top_builddir=$ac_pwd

 +ac_abs_builddir=$ac_pwd$ac_dir_suffix

 +# for backward compatibility:

 +ac_top_builddir=$ac_top_build_prefix

 +

 +case $srcdir in

 +  .)  # We are building in place.

 +    ac_srcdir=.

 +    ac_top_srcdir=$ac_top_builddir_sub

 +    ac_abs_top_srcdir=$ac_pwd ;;

 +  [\\/]* | ?:[\\/]* )  # Absolute name.

 +    ac_srcdir=$srcdir$ac_dir_suffix;

 +    ac_top_srcdir=$srcdir

 +    ac_abs_top_srcdir=$srcdir ;;

 +  *) # Relative name.

 +    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix

 +    ac_top_srcdir=$ac_top_build_prefix$srcdir

 +    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;

 +esac

 +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix

 +

 +    cd "$ac_dir" || { ac_status=$?; continue; }

 +    # Check for guested configure.

 +    if test -f "$ac_srcdir/configure.gnu"; then

 +      echo &&

 +      $SHELL "$ac_srcdir/configure.gnu" --help=recursive

 +    elif test -f "$ac_srcdir/configure"; then

 +      echo &&

 +      $SHELL "$ac_srcdir/configure" --help=recursive

 +    else

 +      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2

 +    fi || ac_status=$?

 +    cd "$ac_pwd" || { ac_status=$?; break; }

 +  done

 +fi

 +

 +test -n "$ac_init_help" && exit $ac_status

 +if $ac_init_version; then

 +  cat <<\_ACEOF

 +newlib configure NEWLIB_VERSION

 +generated by GNU Autoconf 2.61

 +

 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,

 +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.

 +This configure script is free software; the Free Software Foundation

 +gives unlimited permission to copy, distribute and modify it.

 +_ACEOF

 +  exit

 +fi

 +cat >config.log <<_ACEOF

 +This file contains any messages produced by compilers while

 +running configure, to aid debugging if configure makes a mistake.

 +

 +It was created by newlib $as_me NEWLIB_VERSION, which was

 +generated by GNU Autoconf 2.61.  Invocation command line was

 +

 +  $ $0 $@

 +

 +_ACEOF

 +exec 5>>config.log

 +{

 +cat <<_ASUNAME

 +## --------- ##

 +## Platform. ##

 +## --------- ##

 +

 +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`

 +uname -m = `(uname -m) 2>/dev/null || echo unknown`

 +uname -r = `(uname -r) 2>/dev/null || echo unknown`

 +uname -s = `(uname -s) 2>/dev/null || echo unknown`

 +uname -v = `(uname -v) 2>/dev/null || echo unknown`

 +

 +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`

 +/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

 +

 +/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`

 +/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`

 +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`

 +/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`

 +/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`

 +/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`

 +/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`

 +

 +_ASUNAME

 +

 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

 +for as_dir in $PATH

 +do

 +  IFS=$as_save_IFS

 +  test -z "$as_dir" && as_dir=.

 +  echo "PATH: $as_dir"

 +done

 +IFS=$as_save_IFS

 +

 +} >&5

 +

 +cat >&5 <<_ACEOF

 +

 +

 +## ----------- ##

 +## Core tests. ##

 +## ----------- ##

 +

 +_ACEOF

 +

 +

 +# Keep a trace of the command line.

 +# Strip out --no-create and --no-recursion so they do not pile up.

 +# Strip out --silent because we don't want to record it for future runs.

 +# Also quote any args containing shell meta-characters.

 +# Make two passes to allow for proper duplicate-argument suppression.

 +ac_configure_args=

 +ac_configure_args0=

 +ac_configure_args1=

 +ac_must_keep_next=false

 +for ac_pass in 1 2

 +do

 +  for ac_arg

 +  do

 +    case $ac_arg in

 +    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;

 +    -q | -quiet | --quiet | --quie | --qui | --qu | --q \

 +    | -silent | --silent | --silen | --sile | --sil)

 +      continue ;;

 +    *\'*)

 +      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;

 +    esac

 +    case $ac_pass in

 +    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;

 +    2)

 +      ac_configure_args1="$ac_configure_args1 '$ac_arg'"

 +      if test $ac_must_keep_next = true; then

 +	ac_must_keep_next=false # Got value, back to normal.

 +      else

 +	case $ac_arg in

 +	  *=* | --config-cache | -C | -disable-* | --disable-* \

 +	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \

 +	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \

 +	  | -with-* | --with-* | -without-* | --without-* | --x)

 +	    case "$ac_configure_args0 " in

 +	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;

 +	    esac

 +	    ;;

 +	  -* ) ac_must_keep_next=true ;;

 +	esac

 +      fi

 +      ac_configure_args="$ac_configure_args '$ac_arg'"

 +      ;;

 +    esac

 +  done

 +done

 +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }

 +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }

 +

 +# When interrupted or exit'd, cleanup temporary files, and complete

 +# config.log.  We remove comments because anyway the quotes in there

 +# would cause problems or look ugly.

 +# WARNING: Use '\'' to represent an apostrophe within the trap.

 +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.

 +trap 'exit_status=$?

 +  # Save into config.log some information that might help in debugging.

 +  {

 +    echo

 +

 +    cat <<\_ASBOX

 +## ---------------- ##

 +## Cache variables. ##

 +## ---------------- ##

 +_ASBOX

 +    echo

 +    # The following way of writing the cache mishandles newlines in values,

 +(

 +  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do

 +    eval ac_val=\$$ac_var

 +    case $ac_val in #(

 +    *${as_nl}*)

 +      case $ac_var in #(

 +      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5

 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;

 +      esac

 +      case $ac_var in #(

 +      _ | IFS | as_nl) ;; #(

 +      *) $as_unset $ac_var ;;

 +      esac ;;

 +    esac

 +  done

 +  (set) 2>&1 |

 +    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(

 +    *${as_nl}ac_space=\ *)

 +      sed -n \

 +	"s/'\''/'\''\\\\'\'''\''/g;

 +	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"

 +      ;; #(

 +    *)

 +      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"

 +      ;;

 +    esac |

 +    sort

 +)

 +    echo

 +

 +    cat <<\_ASBOX

 +## ----------------- ##

 +## Output variables. ##

 +## ----------------- ##

 +_ASBOX

 +    echo

 +    for ac_var in $ac_subst_vars

 +    do

 +      eval ac_val=\$$ac_var

 +      case $ac_val in

 +      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;

 +      esac

 +      echo "$ac_var='\''$ac_val'\''"

 +    done | sort

 +    echo

 +

 +    if test -n "$ac_subst_files"; then

 +      cat <<\_ASBOX

 +## ------------------- ##

 +## File substitutions. ##

 +## ------------------- ##

 +_ASBOX

 +      echo

 +      for ac_var in $ac_subst_files

 +      do

 +	eval ac_val=\$$ac_var

 +	case $ac_val in

 +	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;

 +	esac

 +	echo "$ac_var='\''$ac_val'\''"

 +      done | sort

 +      echo

 +    fi

 +

 +    if test -s confdefs.h; then

 +      cat <<\_ASBOX

 +## ----------- ##

 +## confdefs.h. ##

 +## ----------- ##

 +_ASBOX

 +      echo

 +      cat confdefs.h

 +      echo

 +    fi

 +    test "$ac_signal" != 0 &&

 +      echo "$as_me: caught signal $ac_signal"

 +    echo "$as_me: exit $exit_status"

 +  } >&5

 +  rm -f core *.core core.conftest.* &&

 +    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&

 +    exit $exit_status

 +' 0

 +for ac_signal in 1 2 13 15; do

 +  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal

 +done

 +ac_signal=0

 +

 +# confdefs.h avoids OS command line length limits that DEFS can exceed.

 +rm -f -r conftest* confdefs.h

 +

 +# Predefined preprocessor variables.

 +

 +cat >>confdefs.h <<_ACEOF

 +#define PACKAGE_NAME "$PACKAGE_NAME"

 +_ACEOF

 +

 +

 +cat >>confdefs.h <<_ACEOF

 +#define PACKAGE_TARNAME "$PACKAGE_TARNAME"

 +_ACEOF

 +

 +

 +cat >>confdefs.h <<_ACEOF

 +#define PACKAGE_VERSION "$PACKAGE_VERSION"

 +_ACEOF

 +

 +

 +cat >>confdefs.h <<_ACEOF

 +#define PACKAGE_STRING "$PACKAGE_STRING"

 +_ACEOF

 +

 +

 +cat >>confdefs.h <<_ACEOF

 +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"

 +_ACEOF

 +

 +

 +# Let the site file select an alternate cache file if it wants to.

 +# Prefer explicitly selected file to automatically selected ones.

 +if test -n "$CONFIG_SITE"; then

 +  set x "$CONFIG_SITE"

 +elif test "x$prefix" != xNONE; then

 +  set x "$prefix/share/config.site" "$prefix/etc/config.site"

 +else

 +  set x "$ac_default_prefix/share/config.site" \

 +	"$ac_default_prefix/etc/config.site"

 +fi

 +shift

 +for ac_site_file

 +do

 +  if test -r "$ac_site_file"; then

 +    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5

 +echo "$as_me: loading site script $ac_site_file" >&6;}

 +    sed 's/^/| /' "$ac_site_file" >&5

 +    . "$ac_site_file"

 +  fi

 +done

 +

 +if test -r "$cache_file"; then

 +  # Some versions of bash will fail to source /dev/null (special

 +  # files actually), so we avoid doing that.

 +  if test -f "$cache_file"; then

 +    { echo "$as_me:$LINENO: loading cache $cache_file" >&5

 +echo "$as_me: loading cache $cache_file" >&6;}

 +    case $cache_file in

 +      [\\/]* | ?:[\\/]* ) . "$cache_file";;

 +      *)                      . "./$cache_file";;

 +    esac

 +  fi

 +else

 +  { echo "$as_me:$LINENO: creating cache $cache_file" >&5

 +echo "$as_me: creating cache $cache_file" >&6;}

 +  >$cache_file

 +fi

 +

 +# Check that the precious variables saved in the cache have kept the same

 +# value.

 +ac_cache_corrupted=false

 +for ac_var in $ac_precious_vars; do

 +  eval ac_old_set=\$ac_cv_env_${ac_var}_set

 +  eval ac_new_set=\$ac_env_${ac_var}_set

 +  eval ac_old_val=\$ac_cv_env_${ac_var}_value

 +  eval ac_new_val=\$ac_env_${ac_var}_value

 +  case $ac_old_set,$ac_new_set in

 +    set,)

 +      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5

 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}

 +      ac_cache_corrupted=: ;;

 +    ,set)

 +      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5

 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}

 +      ac_cache_corrupted=: ;;

 +    ,);;

 +    *)

 +      if test "x$ac_old_val" != "x$ac_new_val"; then

 +	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5

 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}

 +	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5

 +echo "$as_me:   former value:  $ac_old_val" >&2;}

 +	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5

 +echo "$as_me:   current value: $ac_new_val" >&2;}

 +	ac_cache_corrupted=:

 +      fi;;

 +  esac

 +  # Pass precious variables to config.status.

 +  if test "$ac_new_set" = set; then

 +    case $ac_new_val in

 +    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;

 +    *) ac_arg=$ac_var=$ac_new_val ;;

 +    esac

 +    case " $ac_configure_args " in

 +      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.

 +      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;

 +    esac

 +  fi

 +done

 +if $ac_cache_corrupted; then

 +  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5

 +echo "$as_me: error: changes in the environment can compromise the build" >&2;}

 +  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5

 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}

 +   { (exit 1); exit 1; }; }

 +fi

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +

 +ac_ext=c

 +ac_cpp='$CPP $CPPFLAGS'

 +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'

 +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'

 +ac_compiler_gnu=$ac_cv_c_compiler_gnu

 +

 +

 +

 +

 +ac_aux_dir=

 +for ac_dir in ../../../.. "$srcdir"/../../../..; do

 +  if test -f "$ac_dir/install-sh"; then

 +    ac_aux_dir=$ac_dir

 +    ac_install_sh="$ac_aux_dir/install-sh -c"

 +    break

 +  elif test -f "$ac_dir/install.sh"; then

 +    ac_aux_dir=$ac_dir

 +    ac_install_sh="$ac_aux_dir/install.sh -c"

 +    break

 +  elif test -f "$ac_dir/shtool"; then

 +    ac_aux_dir=$ac_dir

 +    ac_install_sh="$ac_aux_dir/shtool install -c"

 +    break

 +  fi

 +done

 +if test -z "$ac_aux_dir"; then

 +  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&5

 +echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. \"$srcdir\"/../../../.." >&2;}

 +   { (exit 1); exit 1; }; }

 +fi

 +

 +# These three variables are undocumented and unsupported,

 +# and are intended to be withdrawn in a future Autoconf release.

 +# They can cause serious problems if a builder's source tree is in a directory

 +# whose full name contains unusual characters.

 +ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.

 +ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.

 +ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.

 +

 +

 +

 +# Make sure we can run config.sub.

 +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||

 +  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5

 +echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}

 +   { (exit 1); exit 1; }; }

 +

 +{ echo "$as_me:$LINENO: checking build system type" >&5

 +echo $ECHO_N "checking build system type... $ECHO_C" >&6; }

 +if test "${ac_cv_build+set}" = set; then

 +  echo $ECHO_N "(cached) $ECHO_C" >&6

 +else

 +  ac_build_alias=$build_alias

 +test "x$ac_build_alias" = x &&

 +  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`

 +test "x$ac_build_alias" = x &&

 +  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5

 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;}

 +   { (exit 1); exit 1; }; }

 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||

 +  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5

 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}

 +   { (exit 1); exit 1; }; }

 +

 +fi

 +{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5

 +echo "${ECHO_T}$ac_cv_build" >&6; }

 +case $ac_cv_build in

 +*-*-*) ;;

 +*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5

 +echo "$as_me: error: invalid value of canonical build" >&2;}

 +   { (exit 1); exit 1; }; };;

 +esac

 +build=$ac_cv_build

 +ac_save_IFS=$IFS; IFS='-'

 +set x $ac_cv_build

 +shift

 +build_cpu=$1

 +build_vendor=$2

 +shift; shift

 +# Remember, the first character of IFS is used to create $*,

 +# except with old shells:

 +build_os=$*

 +IFS=$ac_save_IFS

 +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac

 +

 +

 +{ echo "$as_me:$LINENO: checking host system type" >&5

 +echo $ECHO_N "checking host system type... $ECHO_C" >&6; }

 +if test "${ac_cv_host+set}" = set; then

 +  echo $ECHO_N "(cached) $ECHO_C" >&6

 +else

 +  if test "x$host_alias" = x; then

 +  ac_cv_host=$ac_cv_build

 +else

 +  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||

 +    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5

 +echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}

 +   { (exit 1); exit 1; }; }

 +fi

 +

 +fi

 +{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5

 +echo "${ECHO_T}$ac_cv_host" >&6; }

 +case $ac_cv_host in

 +*-*-*) ;;

 +*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5

 +echo "$as_me: error: invalid value of canonical host" >&2;}

 +   { (exit 1); exit 1; }; };;

 +esac

 +host=$ac_cv_host

 +ac_save_IFS=$IFS; IFS='-'

 +set x $ac_cv_host

 +shift

 +host_cpu=$1

 +host_vendor=$2

 +shift; shift

 +# Remember, the first character of IFS is used to create $*,

 +# except with old shells:

 +host_os=$*

 +IFS=$ac_save_IFS

 +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac

 +

 +

 +am__api_version="1.4"

 +# Find a good install program.  We prefer a C program (faster),

 +# so one script is as good as another.  But avoid the broken or

 +# incompatible versions:

 +# SysV /etc/install, /usr/sbin/install

 +# SunOS /usr/etc/install

 +# IRIX /sbin/install

 +# AIX /bin/install

 +# AmigaOS /C/install, which installs bootblocks on floppy discs

 +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag

 +# AFS /usr/afsws/bin/install, which mishandles nonexistent args

 +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"

 +# OS/2's system install, which has a completely different semantic

 +# ./install, which can be erroneously created by make from ./install.sh.

 +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5

 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }

 +if test -z "$INSTALL"; then

 +if test "${ac_cv_path_install+set}" = set; then

 +  echo $ECHO_N "(cached) $ECHO_C" >&6

 +else

 +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

 +for as_dir in $PATH

 +do

 +  IFS=$as_save_IFS

 +  test -z "$as_dir" && as_dir=.

 +  # Account for people who put trailing slashes in PATH elements.

 +case $as_dir/ in

 +  ./ | .// | /cC/* | \

 +  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \

 +  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \

 +  /usr/ucb/* ) ;;

 +  *)

 +    # OSF1 and SCO ODT 3.0 have their own names for install.

 +    # Don't use installbsd from OSF since it installs stuff as root

 +    # by default.

 +    for ac_prog in ginstall scoinst install; do

 +      for ac_exec_ext in '' $ac_executable_extensions; do

 +	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then

 +	  if test $ac_prog = install &&

 +	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then

 +	    # AIX install.  It has an incompatible calling convention.

 +	    :

 +	  elif test $ac_prog = install &&

 +	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then

 +	    # program-specific install script used by HP pwplus--don't use.

 +	    :

 +	  else

 +	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"

 +	    break 3

 +	  fi

 +	fi

 +      done

 +    done

 +    ;;

 +esac

 +done

 +IFS=$as_save_IFS

 +

 +

 +fi

 +  if test "${ac_cv_path_install+set}" = set; then

 +    INSTALL=$ac_cv_path_install

 +  else

 +    # As a last resort, use the slow shell script.  Don't cache a

 +    # value for INSTALL within a source directory, because that will

 +    # break other packages using the cache if that directory is

 +    # removed, or if the value is a relative name.

 +    INSTALL=$ac_install_sh

 +  fi

 +fi

 +{ echo "$as_me:$LINENO: result: $INSTALL" >&5

 +echo "${ECHO_T}$INSTALL" >&6; }

 +

 +# Use test -z because SunOS4 sh mishandles braces in ${var-val}.

 +# It thinks the first close brace ends the variable substitution.

 +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

 +

 +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'

 +

 +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

 +

 +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5

 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }

 +# Just in case

 +sleep 1

 +echo timestamp > conftestfile

 +# Do `set' in a subshell so we don't clobber the current shell's

 +# arguments.  Must try -L first in case configure is actually a

 +# symlink; some systems play weird games with the mod time of symlinks

 +# (eg FreeBSD returns the mod time of the symlink's containing

 +# directory).

 +if (

 +   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`

 +   if test "$*" = "X"; then

 +      # -L didn't work.

 +      set X `ls -t $srcdir/configure conftestfile`

 +   fi

 +   if test "$*" != "X $srcdir/configure conftestfile" \

 +      && test "$*" != "X conftestfile $srcdir/configure"; then

 +

 +      # If neither matched, then we have a broken ls.  This can happen

 +      # if, for instance, CONFIG_SHELL is bash and it inherits a

 +      # broken ls alias from the environment.  This has actually

 +      # happened.  Such a system could not be considered "sane".

 +      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken

 +alias in your environment" >&5

 +echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken

 +alias in your environment" >&2;}

 +   { (exit 1); exit 1; }; }

 +   fi

 +

 +   test "$2" = conftestfile

 +   )

 +then

 +   # Ok.

 +   :

 +else

 +   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!

 +Check your system clock" >&5

 +echo "$as_me: error: newly created file is older than distributed files!

 +Check your system clock" >&2;}

 +   { (exit 1); exit 1; }; }

 +fi

 +rm -f conftest*

 +{ echo "$as_me:$LINENO: result: yes" >&5

 +echo "${ECHO_T}yes" >&6; }

 +test "$program_prefix" != NONE &&

 +  program_transform_name="s&^&$program_prefix&;$program_transform_name"

 +# Use a double $ so make ignores it.

 +test "$program_suffix" != NONE &&

 +  program_transform_name="s&\$&$program_suffix&;$program_transform_name"

 +# Double any \ or $.  echo might interpret backslashes.

 +# By default was `s,x,x', remove it if useless.

 +cat <<\_ACEOF >conftest.sed

 +s/[\\$]/&&/g;s/;s,x,x,$//

 +_ACEOF

 +program_transform_name=`echo $program_transform_name | sed -f conftest.sed`

 +rm -f conftest.sed

 +

 +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5

 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }

 +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`

 +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then

 +  echo $ECHO_N "(cached) $ECHO_C" >&6

 +else

 +  cat >conftest.make <<\_ACEOF

 +SHELL = /bin/sh

 +all:

 +	@echo '@@@%%%=$(MAKE)=@@@%%%'

 +_ACEOF

 +# GNU make sometimes prints "make[1]: Entering...", which would confuse us.

 +case `${MAKE-make} -f conftest.make 2>/dev/null` in

 +  *@@@%%%=?*=@@@%%%*)

 +    eval ac_cv_prog_make_${ac_make}_set=yes;;

 +  *)

 +    eval ac_cv_prog_make_${ac_make}_set=no;;

 +esac

 +rm -f conftest.make

 +fi

 +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then

 +  { echo "$as_me:$LINENO: result: yes" >&5

 +echo "${ECHO_T}yes" >&6; }

 +  SET_MAKE=

 +else

 +  { echo "$as_me:$LINENO: result: no" >&5

 +echo "${ECHO_T}no" >&6; }

 +  SET_MAKE="MAKE=${MAKE-make}"

 +fi

 +

 +

 +# Check whether --enable-multilib was given.

 +if test "${enable_multilib+set}" = set; then

 +  enableval=$enable_multilib; case "${enableval}" in

 +  yes) multilib=yes ;;

 +  no)  multilib=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5

 +echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  multilib=yes

 +fi

 +

 +# Check whether --enable-target-optspace was given.

 +if test "${enable_target_optspace+set}" = set; then

 +  enableval=$enable_target_optspace; case "${enableval}" in

 +  yes) target_optspace=yes ;;

 +  no)  target_optspace=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5

 +echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  target_optspace=

 +fi

 +

 +# Check whether --enable-malloc-debugging was given.

 +if test "${enable_malloc_debugging+set}" = set; then

 +  enableval=$enable_malloc_debugging; case "${enableval}" in

 +  yes) malloc_debugging=yes ;;

 +  no)  malloc_debugging=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5

 +echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  malloc_debugging=

 +fi

 +

 +# Check whether --enable-newlib-mb was given.

 +if test "${enable_newlib_mb+set}" = set; then

 +  enableval=$enable_newlib_mb; case "${enableval}" in

 +  yes) newlib_mb=yes ;;

 +  no)  newlib_mb=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-mb option" >&5

 +echo "$as_me: error: bad value ${enableval} for newlib-mb option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  newlib_mb=

 +fi

 +

 +# Check whether --enable-newlib-iconv was given.

 +if test "${enable_newlib_iconv+set}" = set; then

 +  enableval=$enable_newlib_iconv; case "${enableval}" in

 +  yes) newlib_iconv=yes ;;

 +  no)  newlib_iconv=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5

 +echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  newlib_iconv=

 +fi

 +

 +# Check whether --enable-newlib-builtin-converters was given.

 +if test "${enable_newlib_builtin_converters+set}" = set; then

 +  enableval=$enable_newlib_builtin_converters; if test x${enableval} = x; then

 +   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&5

 +echo "$as_me: error: bad value ${enableval} for newlib-builtin-converters option - use comma-separated list" >&2;}

 +   { (exit 1); exit 1; }; }

 + fi

 + builtin_converters=${enableval}

 +

 +else

 +  builtin_converters=

 +fi

 +

 +# Check whether --enable-newlib-multithread was given.

 +if test "${enable_newlib_multithread+set}" = set; then

 +  enableval=$enable_newlib_multithread; case "${enableval}" in

 +  yes) newlib_multithread=yes ;;

 +  no)  newlib_multithread=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5

 +echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  newlib_multithread=yes

 +fi

 +

 +# Check whether --enable-newlib-elix-level was given.

 +if test "${enable_newlib_elix_level+set}" = set; then

 +  enableval=$enable_newlib_elix_level; case "${enableval}" in

 +  0)   newlib_elix_level=0 ;;

 +  1)   newlib_elix_level=1 ;;

 +  2)   newlib_elix_level=2 ;;

 +  3)   newlib_elix_level=3 ;;

 +  4)   newlib_elix_level=4 ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5

 +echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  newlib_elix_level=0

 +fi

 +

 +# Check whether --enable-newlib-io-float was given.

 +if test "${enable_newlib_io_float+set}" = set; then

 +  enableval=$enable_newlib_io_float; case "${enableval}" in

 +  yes) newlib_io_float=yes ;;

 +  no)  newlib_io_float=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5

 +echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;}

 +   { (exit 1); exit 1; }; } ;;

 + esac

 +else

 +  newlib_io_float=yes

 +fi

 +

 +# Check whether --enable-newlib-supplied-syscalls was given.

 +if test "${enable_newlib_supplied_syscalls+set}" = set; then

 +  enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in

 +  yes) newlib_may_supply_syscalls=yes ;;

 +  no)  newlib_may_supply_syscalls=no ;;

 +  *)   { { echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5