Add the full crosstool-NG sources to the new repository of its own.
You might just say: 'Yeah! crosstool-NG's got its own repo!".
Unfortunately, that's because the previous repo got damaged beyond repair and I had no backup.
That means I'm putting backups in place in the afternoon.
That also means we've lost history... :-(
1 Note... modified my mjn3 to not conflict with the big endian arm patch.
2 Warning!!! Only the linux target is aware of TARGET_ENDIAN_DEFAULT.
4 #define SUBTARGET_EXTRA_ASM_SPEC "\
5 %{!mcpu=*:-mcpu=xscale} \
6 %{mhard-float:-mfpu=fpa} \
7 %{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
9 #define SUBTARGET_EXTRA_ASM_SPEC "\
10 %{mhard-float:-mfpu=fpa} \
11 %{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
12 in gcc/config/arm/linux-elf.h.
16 # Dimitry Andric <dimitry@andric.com>, 2004-05-01
20 # Nicholas Pitre released this patch for gcc soft-float support here:
21 # http://lists.arm.linux.org.uk/pipermail/linux-arm/2003-October/006436.html
23 # This version has been adapted to work with gcc 3.4.0.
25 # The original patch doesn't distinguish between softfpa and softvfp modes
26 # in the way Nicholas Pitre probably meant. His description is:
28 # "Default is to use APCS-32 mode with soft-vfp. The old Linux default for
29 # floats can be achieved with -mhard-float or with the configure
30 # --with-float=hard option. If -msoft-float or --with-float=soft is used then
31 # software float support will be used just like the default but with the legacy
32 # big endian word ordering for double float representation instead."
34 # Which means the following:
36 # * If you compile without -mhard-float or -msoft-float, you should get
37 # software floating point, using the VFP format. The produced object file
38 # should have these flags in its header:
40 # private flags = 600: [APCS-32] [VFP float format] [software FP]
42 # * If you compile with -mhard-float, you should get hardware floating point,
43 # which always uses the FPA format. Object file header flags should be:
45 # private flags = 0: [APCS-32] [FPA float format]
47 # * If you compile with -msoft-float, you should get software floating point,
48 # using the FPA format. This is done for compatibility reasons with many
49 # existing distributions. Object file header flags should be:
51 # private flags = 200: [APCS-32] [FPA float format] [software FP]
53 # The original patch from Nicholas Pitre contained the following constructs:
55 # #define SUBTARGET_EXTRA_ASM_SPEC "%{!mcpu=*:-mcpu=xscale} \
56 # %{mhard-float:-mfpu=fpa} \
57 # %{!mhard-float: %{msoft-float:-mfpu=softfpa;:-mfpu=softvfp}}"
59 # However, gcc doesn't accept this ";:" notation, used in the 3rd line. This
60 # is probably the reason Robert Schwebel modified it to:
62 # #define SUBTARGET_EXTRA_ASM_SPEC "%{!mcpu=*:-mcpu=xscale} \
63 # %{mhard-float:-mfpu=fpa} \
64 # %{!mhard-float: %{msoft-float:-mfpu=softfpa -mfpu=softvfp}}"
66 # But this causes the following behaviour:
68 # * If you compile without -mhard-float or -msoft-float, the compiler generates
69 # software floating point instructions, but *nothing* is passed to the
70 # assembler, which results in an object file which has flags:
72 # private flags = 0: [APCS-32] [FPA float format]
74 # This is not correct!
76 # * If you compile with -mhard-float, the compiler generates hardware floating
77 # point instructions, and passes "-mfpu=fpa" to the assembler, which results
78 # in an object file which has the same flags as in the previous item, but now
79 # those *are* correct.
81 # * If you compile with -msoft-float, the compiler generates software floating
82 # point instructions, and passes "-mfpu=softfpa -mfpu=softvfp" (in that
83 # order) to the assembler, which results in an object file with flags:
85 # private flags = 600: [APCS-32] [VFP float format] [software FP]
87 # This is not correct, because the last "-mfpu=" option on the assembler
88 # command line determines the actual FPU convention used (which should be FPA
91 # Therefore, I modified this patch to get the desired behaviour. Every
92 # instance of the notation:
94 # %{msoft-float:-mfpu=softfpa -mfpu=softvfp}
98 # %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}
100 # I also did the following:
102 # * Modified all TARGET_DEFAULT macros I could find to include ARM_FLAG_VFP, to
103 # be consistent with Nicholas' original patch.
104 # * Removed any "msoft-float" or "mhard-float" from all MULTILIB_DEFAULTS
105 # macros I could find. I think that if you compile without any options, you
106 # would like to get the defaults. :)
107 # * Removed the extra -lfloat option from LIBGCC_SPEC, since it isn't needed
108 # anymore. (The required functions are now in libgcc.)
110 diff -urN gcc-3.4.1-old/gcc/config/arm/coff.h gcc-3.4.1/gcc/config/arm/coff.h
111 --- gcc-3.4.1-old/gcc/config/arm/coff.h 2004-02-24 08:25:22.000000000 -0600
112 +++ gcc-3.4.1/gcc/config/arm/coff.h 2004-09-02 21:51:15.000000000 -0500
114 #define TARGET_VERSION fputs (" (ARM/coff)", stderr)
116 #undef TARGET_DEFAULT
117 -#define TARGET_DEFAULT (ARM_FLAG_SOFT_FLOAT | ARM_FLAG_APCS_32 | ARM_FLAG_APCS_FRAME | ARM_FLAG_MMU_TRAPS)
118 +#define TARGET_DEFAULT \
119 + ( ARM_FLAG_SOFT_FLOAT \
121 + | ARM_FLAG_APCS_32 \
122 + | ARM_FLAG_APCS_FRAME \
123 + | ARM_FLAG_MMU_TRAPS )
125 #ifndef MULTILIB_DEFAULTS
126 #define MULTILIB_DEFAULTS \
127 - { "marm", "mlittle-endian", "msoft-float", "mapcs-32", "mno-thumb-interwork" }
128 + { "marm", "mlittle-endian", "mapcs-32", "mno-thumb-interwork" }
131 /* This is COFF, but prefer stabs. */
132 diff -urN gcc-3.4.1-old/gcc/config/arm/elf.h gcc-3.4.1/gcc/config/arm/elf.h
133 --- gcc-3.4.1-old/gcc/config/arm/elf.h 2004-02-24 08:25:22.000000000 -0600
134 +++ gcc-3.4.1/gcc/config/arm/elf.h 2004-09-02 21:51:15.000000000 -0500
137 #ifndef SUBTARGET_ASM_FLOAT_SPEC
138 #define SUBTARGET_ASM_FLOAT_SPEC "\
139 -%{mapcs-float:-mfloat} %{msoft-float:-mfpu=softfpa}"
140 +%{mapcs-float:-mfloat} \
141 +%{mhard-float:-mfpu=fpa} \
142 +%{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
146 @@ -106,12 +108,17 @@
149 #ifndef TARGET_DEFAULT
150 -#define TARGET_DEFAULT (ARM_FLAG_SOFT_FLOAT | ARM_FLAG_APCS_32 | ARM_FLAG_APCS_FRAME | ARM_FLAG_MMU_TRAPS)
151 +#define TARGET_DEFAULT \
152 + ( ARM_FLAG_SOFT_FLOAT \
154 + | ARM_FLAG_APCS_32 \
155 + | ARM_FLAG_APCS_FRAME \
156 + | ARM_FLAG_MMU_TRAPS )
159 #ifndef MULTILIB_DEFAULTS
160 #define MULTILIB_DEFAULTS \
161 - { "marm", "mlittle-endian", "msoft-float", "mapcs-32", "mno-thumb-interwork", "fno-leading-underscore" }
162 + { "marm", "mlittle-endian", "mapcs-32", "mno-thumb-interwork", "fno-leading-underscore" }
165 #define TARGET_ASM_FILE_START_APP_OFF true
166 diff -urN gcc-3.4.1-old/gcc/config/arm/linux-elf.h gcc-3.4.1/gcc/config/arm/linux-elf.h
167 --- gcc-3.4.1-old/gcc/config/arm/linux-elf.h 2004-09-02 21:50:52.000000000 -0500
168 +++ gcc-3.4.1/gcc/config/arm/linux-elf.h 2004-09-02 22:00:49.000000000 -0500
170 #define TARGET_LINKER_EMULATION "armelf_linux"
173 -/* Default is to use APCS-32 mode. */
175 + * Default is to use APCS-32 mode with soft-vfp.
176 + * The old Linux default for floats can be achieved with -mhard-float
177 + * or with the configure --with-float=hard option.
178 + * If -msoft-float or --with-float=soft is used then software float
179 + * support will be used just like the default but with the legacy
180 + * big endian word ordering for double float representation instead.
182 #undef TARGET_DEFAULT
183 -#define TARGET_DEFAULT \
184 - ( ARM_FLAG_APCS_32 | \
185 - ARM_FLAG_MMU_TRAPS | \
186 - TARGET_ENDIAN_DEFAULT )
187 +#define TARGET_DEFAULT \
188 + ( ARM_FLAG_APCS_32 \
189 + | ARM_FLAG_SOFT_FLOAT \
190 + | TARGET_ENDIAN_DEFAULT \
192 + | ARM_FLAG_MMU_TRAPS )
194 +#undef SUBTARGET_EXTRA_ASM_SPEC
195 +#define SUBTARGET_EXTRA_ASM_SPEC "\
196 +%{mhard-float:-mfpu=fpa} \
197 +%{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
199 #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm6
203 #undef MULTILIB_DEFAULTS
204 #define MULTILIB_DEFAULTS \
205 - { "marm", TARGET_ENDIAN_OPTION, "mhard-float", "mapcs-32", "mno-thumb-interwork" }
206 + { "marm", TARGET_ENDIAN_OPTION, "mapcs-32", "mno-thumb-interwork" }
208 #define CPP_APCS_PC_DEFAULT_SPEC "-D__APCS_32__"
212 %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
214 -#define LIBGCC_SPEC "%{msoft-float:-lfloat} -lgcc"
215 +#define LIBGCC_SPEC "-lgcc"
217 /* Provide a STARTFILE_SPEC appropriate for GNU/Linux. Here we add
218 the GNU/Linux magical crtbegin.o file (see crtstuff.c) which
219 diff -urN gcc-3.4.1-old/gcc/config/arm/t-linux gcc-3.4.1/gcc/config/arm/t-linux
220 --- gcc-3.4.1-old/gcc/config/arm/t-linux 2003-09-20 16:09:07.000000000 -0500
221 +++ gcc-3.4.1/gcc/config/arm/t-linux 2004-09-02 21:51:15.000000000 -0500
223 LIBGCC2_DEBUG_CFLAGS = -g0
225 LIB1ASMSRC = arm/lib1funcs.asm
226 -LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx
227 +LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \
228 + _negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi _fixunsdfsi \
229 + _truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \
230 + _fixsfsi _fixunssfsi
232 # MULTILIB_OPTIONS = mhard-float/msoft-float
233 # MULTILIB_DIRNAMES = hard-float soft-float
234 diff -urN gcc-3.4.1-old/gcc/config/arm/unknown-elf.h gcc-3.4.1/gcc/config/arm/unknown-elf.h
235 --- gcc-3.4.1-old/gcc/config/arm/unknown-elf.h 2004-02-24 08:25:22.000000000 -0600
236 +++ gcc-3.4.1/gcc/config/arm/unknown-elf.h 2004-09-02 21:51:15.000000000 -0500
239 /* Default to using APCS-32 and software floating point. */
240 #ifndef TARGET_DEFAULT
241 -#define TARGET_DEFAULT (ARM_FLAG_SOFT_FLOAT | ARM_FLAG_APCS_32 | ARM_FLAG_APCS_FRAME | ARM_FLAG_MMU_TRAPS)
242 +#define TARGET_DEFAULT \
243 + ( ARM_FLAG_SOFT_FLOAT \
245 + | ARM_FLAG_APCS_32 \
246 + | ARM_FLAG_APCS_FRAME \
247 + | ARM_FLAG_MMU_TRAPS )
250 /* Now we define the strings used to build the spec file. */
251 diff -urN gcc-3.4.1-old/gcc/config/arm/xscale-elf.h gcc-3.4.1/gcc/config/arm/xscale-elf.h
252 --- gcc-3.4.1-old/gcc/config/arm/xscale-elf.h 2003-07-01 18:26:43.000000000 -0500
253 +++ gcc-3.4.1/gcc/config/arm/xscale-elf.h 2004-09-02 21:51:15.000000000 -0500
255 endian, regardless of the endian-ness of the memory
258 -#define SUBTARGET_EXTRA_ASM_SPEC "%{!mcpu=*:-mcpu=xscale} \
259 - %{mhard-float:-mfpu=fpa} \
260 - %{!mhard-float: %{msoft-float:-mfpu=softfpa;:-mfpu=softvfp}}"
261 +#define SUBTARGET_EXTRA_ASM_SPEC "\
262 +%{!mcpu=*:-mcpu=xscale} \
263 +%{mhard-float:-mfpu=fpa} \
264 +%{!mhard-float: %{msoft-float:-mfpu=softfpa} %{!msoft-float:-mfpu=softvfp}}"
266 #ifndef MULTILIB_DEFAULTS
267 #define MULTILIB_DEFAULTS \
268 - { "mlittle-endian", "mno-thumb-interwork", "marm", "msoft-float" }
269 + { "mlittle-endian", "mno-thumb-interwork", "marm" }