2 # Copyright 2007 Yann E. MORIN
3 # Licensed under the GPL v2. See COPYING in the root of this package.
5 # This is the main entry point to crosstool
7 # - download, extract and patch the toolchain components
8 # - build and install each components in turn
9 # - and eventually test the resulting toolchain
11 # What this file does is prepare the environment, based upon the user-choosen
12 # options. It also checks the existing environment for un-friendly variables,
13 # and builds the tools.
15 # Parse the common functions
16 # Note: some initialisation and sanitizing is done while parsing this file,
18 # - set trap handler on errors,
19 # - don't hash commands lookups,
20 # - initialise logging.
21 . "${CT_LIB_DIR}/scripts/functions"
23 # Parse the configuration file
24 # It has some info about the logging facility, so include it early
26 # Yes! We can do full logging from now on!
28 # Check running as root
29 if [ -z "${CT_ALLOW_BUILD_AS_ROOT_SURE}" ]; then
30 if [ $(id -u) -eq 0 ]; then
31 CT_DoLog ERROR "You must NOT be root to run crosstool-NG"
36 # If we want an interactive debug-shell, we must ensure these FDs
37 # are indeed connected to a terminal (and not redirected in any way).
38 if [ "${CT_DEBUG_INTERACTIVE}" = "y" -a ! \( -t 0 -a -t 6 -a -t 2 \) ]; then
39 CT_DoLog ERROR "Can't spawn interactive debug-shell,"
40 CT_DoLog ERROR "because stdout/stderr has been redirected."
44 # Override the locale early, in case we ever translate crosstool-NG messages
45 if [ -z "${CT_NO_OVERIDE_LC_MESSAGES}" ]; then
50 # remove . from PATH since it can cause gcc build failures
53 # Some sanity checks in the environment and needed tools
54 CT_DoLog INFO "Performing some trivial sanity checks"
55 CT_TestAndAbort "Don't set LD_LIBRARY_PATH. It screws up the build." -n "${LD_LIBRARY_PATH}"
56 CT_TestAndAbort "Don't set LIBRARY_PATH. It screws up the build." -n "${LIBRARY_PATH}"
57 CT_TestAndAbort "Don't set LPATH. It screws up the build." -n "${LPATH}"
58 CT_TestAndAbort "Don't set CFLAGS. It screws up the build." -n "${CFLAGS}"
59 CT_TestAndAbort "Don't set CXXFLAGS. It screws up the build." -n "${CXXFLAGS}"
60 CT_Test "GREP_OPTIONS screws up the build. Resetting." -n "${GREP_OPTIONS}"
62 # Workaround against openSUSE 12.1 that breaks ./configure for cross-compilation:
65 # Some sanity checks on paths content
72 eval dir="\${CT_${d}_DIR}"
75 CT_Abort "'CT_${d}_DIR'='${dir}' contains a space in it.\nDon't use spaces in paths, it breaks things."
78 CT_Abort "'CT_${d}_DIR'='${dir}' contains a colon in it.\nDon't use colons in paths, it breaks things."
84 CT_WORK_DIR="${CT_WORK_DIR:-${CT_TOP_DIR}/.build}"
85 CT_DoExecLog ALL mkdir -p "${CT_WORK_DIR}"
86 CT_DoExecLog DEBUG rm -f "${CT_WORK_DIR}/backtrace"
88 # Check build file system case-sensitiveness
89 CT_DoExecLog DEBUG touch "${CT_WORK_DIR}/foo"
90 CT_TestAndAbort "Your file system in '${CT_WORK_DIR}' is *not* case-sensitive!" -f "${CT_WORK_DIR}/FOO"
91 CT_DoExecLog DEBUG rm -f "${CT_WORK_DIR}/foo"
93 # Check the user is using an existing SHELL to be used by ./configure and Makefiles
94 CT_TestOrAbort "The CONFIG_SHELL '${CT_CONFIG_SHELL}' is not valid" -f "${CT_CONFIG_SHELL}" -a -x "${CT_CONFIG_SHELL}"
96 # Create the bin-override early
97 # Contains symlinks to the tools found by ./configure
98 # Note: CT_DoLog and CT_DoExecLog do not use any of those tool, so
99 # they can be safely used
100 CT_TOOLS_OVERIDE_DIR="${CT_WORK_DIR}/tools"
101 CT_DoLog DEBUG "Creating bin-override for tools in '${CT_TOOLS_OVERIDE_DIR}'"
102 CT_DoExecLog DEBUG mkdir -p "${CT_TOOLS_OVERIDE_DIR}/bin"
103 cat "${CT_LIB_DIR}/paths.sh" |while read trash line; do
106 CT_DoLog DEBUG "Creating script-override for '${tool}' -> '${path}'"
107 # Note: we need to supress the " in the path because
108 # there can be arguments in there (thanks autostuff...)
109 printf "#${BANG}${CT_CONFIG_SHELL}\nexec ${path//\"/} \"\${@}\"\n" >"${CT_TOOLS_OVERIDE_DIR}/bin/${tool}"
110 CT_DoExecLog ALL chmod 700 "${CT_TOOLS_OVERIDE_DIR}/bin/${tool}"
112 export PATH="${CT_TOOLS_OVERIDE_DIR}/bin:${PATH}"
114 # Start date. Can't be done until we know the locale
115 # Also requires the bin-override tools
116 CT_STAR_DATE=$(CT_DoDate +%s%N)
117 CT_STAR_DATE_HUMAN=$(CT_DoDate +%Y%m%d.%H%M%S)
119 # Log real begining of build, now
120 CT_DoLog INFO "Build started ${CT_STAR_DATE_HUMAN}"
122 # We really need to extract from ,config and not .config.2, as we
123 # do want the kconfig's values, not our mangled config with arrays.
124 CT_DoStep DEBUG "Dumping user-supplied crosstool-NG configuration"
125 CT_DoExecLog DEBUG grep -E '^(# |)CT_' .config
128 CT_DoLog DEBUG "Unsetting and unexporting MAKEFLAGS"
132 CT_DoLog INFO "Building environment variables"
134 # Include sub-scripts instead of calling them: that way, we do not have to
135 # export any variable, nor re-parse the configuration and functions files.
136 . "${CT_LIB_DIR}/scripts/build/internals.sh"
137 . "${CT_LIB_DIR}/scripts/build/arch/${CT_ARCH}.sh"
138 . "${CT_LIB_DIR}/scripts/build/companion_tools.sh"
139 . "${CT_LIB_DIR}/scripts/build/kernel/${CT_KERNEL}.sh"
140 . "${CT_LIB_DIR}/scripts/build/companion_libs.sh"
141 . "${CT_LIB_DIR}/scripts/build/binutils/${CT_BINUTILS}.sh"
142 . "${CT_LIB_DIR}/scripts/build/libc/${CT_LIBC}.sh"
143 . "${CT_LIB_DIR}/scripts/build/cc/${CT_CC}.sh"
144 . "${CT_LIB_DIR}/scripts/build/debug.sh"
145 . "${CT_LIB_DIR}/scripts/build/test_suite.sh"
147 # Target tuple: CT_TARGET needs a little love:
148 CT_DoBuildTargetTuple
150 # Kludge: If any of the configured options needs CT_TARGET,
151 # then rescan the options file now:
154 # Sanity check some directories
155 CT_TestAndAbort "'CT_PREFIX_DIR' is not set: where should I install?" -z "${CT_PREFIX_DIR}"
157 # Avoid multiple '/' in the prefix dir, it breaks relocatability
158 CT_PREFIX_DIR="$( "${sed}" -r -e 's:/+:/:g; s:/*$::;' <<<"${CT_PREFIX_DIR}" )"
160 # Second kludge: merge user-supplied target CFLAGS with architecture-provided
161 # target CFLAGS. Do the same for LDFLAGS in case it happens in the future.
162 # Put user-supplied flags at the end, so that they take precedence.
163 CT_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_TARGET_CFLAGS}"
164 CT_TARGET_LDFLAGS="${CT_ARCH_TARGET_LDFLAGS} ${CT_TARGET_LDFLAGS}"
165 CT_CC_CORE_EXTRA_CONFIG_ARRAY=( ${CT_ARCH_CC_CORE_EXTRA_CONFIG} "${CT_CC_CORE_EXTRA_CONFIG_ARRAY[@]}" )
166 CT_CC_EXTRA_CONFIG_ARRAY=( ${CT_ARCH_CC_EXTRA_CONFIG} "${CT_CC_EXTRA_CONFIG_ARRAY[@]}" )
168 # Compute the package version string
169 CT_PKGVERSION="crosstool-NG ${CT_VERSION}${CT_TOOLCHAIN_PKGVERSION:+ - ${CT_TOOLCHAIN_PKGVERSION}}"
171 # Compute the working directories names
172 CT_TARBALLS_DIR="${CT_WORK_DIR}/tarballs"
173 CT_SRC_DIR="${CT_WORK_DIR}/src"
174 CT_BUILD_DIR="${CT_WORK_DIR}/${CT_TARGET}/build"
175 CT_BUILDTOOLS_PREFIX_DIR="${CT_WORK_DIR}/${CT_TARGET}/buildtools"
176 CT_STATE_DIR="${CT_WORK_DIR}/${CT_TARGET}/state"
177 CT_CONFIG_DIR="${CT_BUILD_DIR}/configs"
178 # Note about HOST_COMPLIBS_DIR: it's always gonna be in the buildtools dir, or a
179 # sub-dir. So we won't have to save/restore it, not even create it.
180 # In case of cross or native, host-complibs are used for build-complibs;
181 # in case of canadian or cross-native, host-complibs are specific
182 case "${CT_TOOLCHAIN_TYPE}" in
184 CT_HOST_COMPLIBS_DIR="${CT_BUILDTOOLS_PREFIX_DIR}"
186 canadian|cross-native)
187 CT_HOST_COMPLIBS_DIR="${CT_BUILDTOOLS_PREFIX_DIR}/complibs-host"
191 # Compute test suite install directory
192 CT_TEST_SUITE_DIR=${CT_INSTALL_DIR}/test-suite
194 # We must ensure that we can restart if asked for!
195 if [ -n "${CT_RESTART}" -a ! -d "${CT_STATE_DIR}" ]; then
196 CT_DoLog ERROR "You asked to restart a non-restartable build"
197 CT_DoLog ERROR "This happened because you didn't set CT_DEBUG_CT_SAVE_STEPS"
198 CT_DoLog ERROR "in the config options for the previous build, or the state"
199 CT_DoLog ERROR "directory for the previous build was deleted."
200 CT_Abort "I will stop here to avoid any carnage"
203 # If the local tarball directory does not exist, say so, and don't try to save there!
204 if [ "${CT_SAVE_TARBALLS}" = "y" \
205 -a ! -d "${CT_LOCAL_TARBALLS_DIR}" ]; then
206 CT_DoLog WARN "Directory '${CT_LOCAL_TARBALLS_DIR}' does not exist."
207 CT_DoLog WARN "Will not save downloaded tarballs to local storage."
211 # Check now if we can write to the destination directory:
212 if [ -d "${CT_INSTALL_DIR}" ]; then
213 CT_TestAndAbort "Destination directory '${CT_INSTALL_DIR}' is not removable" ! -w $(dirname "${CT_INSTALL_DIR}")
216 # Good, now grab a bit of informations on the system we're being run on,
217 # just in case something goes awok, and it's not our fault:
218 CT_SYS_USER=$(id -un)
219 CT_SYS_HOSTNAME=$(hostname -f 2>/dev/null || true)
220 # Hmmm. Some non-DHCP-enabled machines do not have an FQDN... Fall back to node name.
221 CT_SYS_HOSTNAME="${CT_SYS_HOSTNAME:-$(uname -n)}"
222 CT_SYS_KERNEL=$(uname -s)
223 CT_SYS_REVISION=$(uname -r)
224 CT_SYS_OS=$(uname -s)
225 CT_SYS_MACHINE=$(uname -m)
226 CT_SYS_PROCESSOR=$(uname -p)
227 CT_SYS_GCC=$(gcc -dumpversion)
228 CT_SYS_TARGET=$(CT_DoConfigGuess)
229 CT_TOOLCHAIN_ID="crosstool-${CT_VERSION} build ${CT_STAR_DATE_HUMAN} by ${CT_SYS_USER}@${CT_SYS_HOSTNAME}"
231 CT_DoLog EXTRA "Preparing working directories"
233 # Ah! The build directory shall be eradicated, even if we restart!
234 # Ditto for the build tools install dir
235 CT_DoForceRmdir "${CT_BUILD_DIR}" "${CT_BUILDTOOLS_PREFIX_DIR}"
237 # Don't eradicate directories if we need to restart
238 if [ -z "${CT_RESTART}" ]; then
239 # Get rid of pre-existing installed toolchain and previous build directories.
240 if [ "${CT_FORCE_DOWNLOAD}" = "y" -a -d "${CT_TARBALLS_DIR}" ]; then
241 CT_DoForceRmdir "${CT_TARBALLS_DIR}"
243 if [ "${CT_FORCE_EXTRACT}" = "y" -a -d "${CT_SRC_DIR}" ]; then
244 CT_DoForceRmdir "${CT_SRC_DIR}"
246 if [ -d "${CT_INSTALL_DIR}" -a "${CT_RM_RF_PREFIX_DIR}" = "y" ]; then
247 CT_DoForceRmdir "${CT_INSTALL_DIR}"
249 # In case we start anew, get rid of the previously saved state directory
250 if [ -d "${CT_STATE_DIR}" ]; then
251 CT_DoForceRmdir "${CT_STATE_DIR}"
255 # Create the directories we'll use, even if restarting: it does no harm to
256 # create already existent directories, and CT_BUILD_DIR needs to be created
258 CT_DoExecLog ALL mkdir -p "${CT_TARBALLS_DIR}"
259 CT_DoExecLog ALL mkdir -p "${CT_SRC_DIR}"
260 CT_DoExecLog ALL mkdir -p "${CT_BUILD_DIR}"
261 CT_DoExecLog ALL mkdir -p "${CT_BUILDTOOLS_PREFIX_DIR}/bin"
262 CT_DoExecLog ALL mkdir -p "${CT_CONFIG_DIR}"
263 CT_DoExecLog ALL mkdir -p "${CT_INSTALL_DIR}"
264 CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}"
265 CT_DoExecLog ALL mkdir -p "${CT_HOST_COMPLIBS_DIR}"
267 # Only create the state dir if asked for a restartable build
268 [ -n "${CT_DEBUG_CT_SAVE_STEPS}" ] && CT_DoExecLog ALL mkdir -p "${CT_STATE_DIR}"
270 # Check install file system case-sensitiveness
271 CT_DoExecLog DEBUG touch "${CT_PREFIX_DIR}/foo"
272 CT_TestAndAbort "Your file system in '${CT_PREFIX_DIR}' is *not* case-sensitive!" -f "${CT_PREFIX_DIR}/FOO"
273 CT_DoExecLog DEBUG rm -f "${CT_PREFIX_DIR}/foo"
275 # Kludge: CT_INSTALL_DIR and CT_PREFIX_DIR might have grown read-only if
276 # the previous build was successful.
277 CT_DoExecLog ALL chmod -R u+w "${CT_INSTALL_DIR}" "${CT_PREFIX_DIR}"
279 # Setting up the rest of the environment only if not restarting
280 if [ -z "${CT_RESTART}" ]; then
281 case "${CT_SYSROOT_NAME}" in
282 "") CT_SYSROOT_NAME="sysroot";;
283 .) CT_Abort "Sysroot name is set to '.' which is forbidden";;
284 *' '*) CT_Abort "Sysroot name contains forbidden space(s): '${CT_SYSROOT_NAME}'";;
285 */*) CT_Abort "Sysroot name contains forbidden slash(es): '${CT_SYSROOT_NAME}'";;
288 # Arrange paths depending on wether we use sysroot or not.
289 if [ "${CT_USE_SYSROOT}" = "y" ]; then
290 CT_SYSROOT_REL_DIR="${CT_SYSROOT_DIR_PREFIX:+${CT_SYSROOT_DIR_PREFIX}/}${CT_SYSROOT_NAME}"
291 CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/${CT_SYSROOT_REL_DIR}"
292 CT_DEBUGROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/${CT_SYSROOT_DIR_PREFIX}/debug-root"
293 CT_HEADERS_DIR="${CT_SYSROOT_DIR}/usr/include"
294 CT_SanitiseVarDir CT_SYSROOT_REL_DIR CT_SYSROOT_DIR CT_DEBUGROOT_DIR CT_HEADERS_DIR
295 BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
296 CC_CORE_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
297 CC_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
299 # glibc's prefix must be exactly /usr, else --with-sysroot'd gcc will get
300 # confused when $sysroot/usr/include is not present.
301 # Note: --prefix=/usr is magic!
302 # See http://www.gnu.org/software/libc/FAQ.html#s-2.2
304 # plain old way. All libraries in prefix/target/lib
305 CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}"
306 CT_DEBUGROOT_DIR="${CT_SYSROOT_DIR}"
307 CT_HEADERS_DIR="${CT_SYSROOT_DIR}/include"
308 CT_SanitiseVarDir CT_SYSROOT_DIR CT_DEBUGROOT_DIR CT_HEADERS_DIR
309 # hack! Always use --with-sysroot for binutils.
310 # binutils 2.14 and later obey it, older binutils ignore it.
311 # Lets you build a working 32->64 bit cross gcc
312 BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"
313 # Use --with-headers, else final gcc will define disable_glibc while
314 # building libgcc, and you'll have no profiling
315 CC_CORE_SYSROOT_ARG="--without-headers"
316 CC_SYSROOT_ARG="--with-headers=${CT_HEADERS_DIR}"
317 LIBC_SYSROOT_ARG="prefix="
319 CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}"
320 CT_DoExecLog ALL mkdir -p "${CT_DEBUGROOT_DIR}"
322 # Prepare the 'lib' directories in sysroot, else the ../lib64 hack used by
323 # 32 -> 64 bit crosscompilers won't work, and build of final gcc will fail
324 # with: "ld: cannot open crti.o: No such file or directory"
325 # Also prepare the lib directory in the install dir, else some 64 bit archs
327 CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}/lib"
328 CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/lib"
329 CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/usr/lib"
330 CT_DoExecLog ALL mkdir -p "${CT_HEADERS_DIR}"
332 if [ "${CT_USE_SYSROOT}" = "y" ]; then
333 # Prevent gcc from installing its libraries outside of the sysroot
334 CT_Pushd "${CT_PREFIX_DIR}/${CT_TARGET}"
335 CT_DoExecLog ALL ln -sf "${CT_SYSROOT_REL_DIR}/lib" "lib"
339 # Since we're *not* multilib on the target side, we want all the
340 # libraries to end up in "lib". We create "lib64" (for 64-bit
341 # build or host architectures) and "lib32" (for 32-bit emulation
342 # on 64-bit) as symlinks to "lib".
344 # Not all of these symlinks are necessary, but better safe than
345 # sorry. They are summarily removed by build/internals.sh:do_finish.
348 "${CT_SYSROOT_DIR}" \
349 "${CT_SYSROOT_DIR}/usr" \
350 "${CT_PREFIX_DIR}/${CT_TARGET}" \
352 CT_DoExecLog ALL ln -sf "lib" "${d}/lib32"
353 CT_DoExecLog ALL ln -sf "lib" "${d}/lib64"
356 # Determine build system if not set by the user
357 if [ -z "${CT_BUILD}" ]; then
358 CT_BUILD=$(CT_DoConfigGuess)
361 # Prepare mangling patterns to later modify BUILD and HOST (see below)
362 case "${CT_TOOLCHAIN_TYPE}" in
364 # A cross-compiler runs on the same machine it is built on
365 CT_HOST="${CT_BUILD}"
366 build_mangle="build_"
369 install_build_tools_for="BUILD HOST"
372 build_mangle="build_"
375 install_build_tools_for="BUILD HOST"
377 *) CT_Abort "No code for '${CT_TOOLCHAIN_TYPE}' toolchain type!"
381 # Save the real tuples to generate shell-wrappers to the real tools
382 CT_REAL_BUILD="${CT_BUILD}"
383 CT_REAL_HOST="${CT_HOST}"
384 CT_REAL_TARGET="${CT_TARGET}"
386 # Canonicalise CT_BUILD and CT_HOST
387 # Not only will it give us full-qualified tuples, but it will also ensure
388 # that they are valid tuples (in case of typo with user-provided tuples)
389 # That's way better than trying to rewrite config.sub ourselves...
390 # CT_TARGET is already made canonical in CT_DoBuildTargetTuple
391 CT_BUILD=$(CT_DoConfigSub "${CT_BUILD}")
392 CT_HOST=$(CT_DoConfigSub "${CT_HOST}")
394 # Modify BUILD and HOST so that gcc always generate a cross-compiler
395 # even if any of the build, host or target machines are the same.
396 # NOTE: we'll have to mangle the (BUILD|HOST)->TARGET x-compiler to
397 # support canadain build, later...
398 CT_BUILD="${CT_BUILD/-/-${build_mangle}}"
399 CT_HOST="${CT_HOST/-/-${host_mangle}}"
400 CT_TARGET="${CT_TARGET/-/-${target_mangle}}"
402 # Now we have mangled our BUILD and HOST tuples, we must fake the new
403 # cross-tools for those mangled tuples.
404 CT_DoLog DEBUG "Making build system tools available"
405 for m in ${install_build_tools_for}; do
410 if [ -n "${!p}" ]; then
416 for tool in ar as dlltool gcc g++ gcj gnatbind gnatmake ld nm objcopy objdump ranlib strip windres; do
417 # First try with prefix + suffix
418 # Then try with prefix only
419 # Then try with suffix only, but only for BUILD, and HOST iff REAL_BUILD == REAL_HOST
420 # Finally try with neither prefix nor suffix, but only for BUILD, and HOST iff REAL_BUILD == REAL_HOST
421 # This is needed, because some tools have a prefix and
422 # a suffix (eg. gcc), while others may have only one,
423 # or even none (eg. binutils)
424 where=$(CT_Which "${t}${tool}${!s}")
425 [ -z "${where}" ] && where=$(CT_Which "${t}${tool}")
427 -a \( "${m}" = "BUILD" \
428 -o "${CT_REAL_BUILD}" = "${!r}" \) ]; then
429 where=$(CT_Which "${tool}${!s}")
432 -a \( "${m}" = "BUILD" \
433 -o "${CT_REAL_BUILD}" = "${!r}" \) ]; then
434 where=$(CT_Which "${tool}")
437 # Not all tools are available for all platforms, but some are required.
438 if [ -n "${where}" ]; then
439 CT_DoLog DEBUG " '${!v}-${tool}' -> '${where}'"
440 printf "#${BANG}${CT_CONFIG_SHELL}\nexec '${where}' \"\${@}\"\n" >"${CT_BUILDTOOLS_PREFIX_DIR}/bin/${!v}-${tool}"
441 CT_DoExecLog ALL chmod 700 "${CT_BUILDTOOLS_PREFIX_DIR}/bin/${!v}-${tool}"
444 # We'll at least need some of them...
445 ar|as|gcc|ld|nm|objcopy|objdump|ranlib)
446 CT_Abort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!"
448 # Some are conditionnally required
449 # Add them in alphabetical (C locale) ordering
451 # g++ (needed for companion lib), only needed for HOST
452 CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${m}" = "HOST"
455 CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${CT_CC_LANG_JAVA}" = "y"
458 CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${CT_STRIP_ALL_TOOLCHAIN_EXECUTABLES}" = "y"
460 # If any other is missing, only warn at low level
462 # It does not deserve a WARN level.
463 CT_DoLog DEBUG " Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : not required."
470 # Some makeinfo versions are a pain in [put your most sensible body part here].
471 # Go ahead with those, by creating a wrapper that keeps partial files, and that
473 CT_DoLog DEBUG " 'makeinfo' -> '$(CT_Which makeinfo)'"
474 printf "#${BANG}${CT_CONFIG_SHELL}\n$(CT_Which makeinfo) --force \"\${@}\"\ntrue\n" >"${CT_BUILDTOOLS_PREFIX_DIR}/bin/makeinfo"
475 CT_DoExecLog ALL chmod 700 "${CT_BUILDTOOLS_PREFIX_DIR}/bin/makeinfo"
477 # Carefully add paths in the order we want them:
478 # - first try in ${CT_PREFIX_DIR}/bin
479 # - then try the buildtools dir
480 # - fall back to searching user's PATH
481 # Of course, neither cross-native nor canadian can run on BUILD,
482 # so don't add those PATHs in this case...
483 case "${CT_TOOLCHAIN_TYPE}" in
484 cross) export PATH="${CT_PREFIX_DIR}/bin:${CT_BUILDTOOLS_PREFIX_DIR}/bin:${PATH}";;
485 canadian) export PATH="${CT_BUILDTOOLS_PREFIX_DIR}/bin:${PATH}";;
490 # Explicitly optimise, else the lines below will overide the
491 # package's default optimisation flags
492 CT_CFLAGS_FOR_BUILD="-O2 -g"
493 CT_CFLAGS_FOR_BUILD+=" ${CT_EXTRA_CFLAGS_FOR_BUILD}"
494 CT_LDFLAGS_FOR_BUILD=
495 CT_LDFLAGS_FOR_BUILD+=" ${CT_EXTRA_LDFLAGS_FOR_BUILD}"
498 # Explicitly optimise, else the lines below will overide the
499 # package's default optimisation flags
500 CT_CFLAGS_FOR_HOST="-O2 -g"
501 [ "${CT_USE_PIPES}" = "y" ] && CT_CFLAGS_FOR_HOST+=" -pipe"
502 CT_CFLAGS_FOR_HOST+=" ${CT_EXTRA_CFLAGS_FOR_HOST}"
504 CT_LDFLAGS_FOR_HOST+=" ${CT_EXTRA_LDFLAGS_FOR_HOST}"
505 CT_DoLog DEBUG "CFLAGS for host compiler: '${CT_CFLAGS_FOR_HOST}'"
506 CT_DoLog DEBUG "LDFLAGS for host compiler: '${CT_LDFLAGS_FOR_HOST}'"
508 # Set the shell to be used by ./configure scripts and by Makefiles (those
510 export CONFIG_SHELL="${CT_CONFIG_SHELL}" # for ./configure
511 export SHELL="${CT_CONFIG_SHELL}" # for Makefiles
513 # And help make go faster
515 # Override the configured jobs with what's been given on the command line
516 [ -n "${CT_JOBS}" ] && CT_PARALLEL_JOBS="${CT_JOBS}"
517 # Use the number of processors+1 when automatically setting the number of
518 # parallel jobs. Fall back to 1 if the host doesn't use GLIBC.
519 AUTO_JOBS=$((`getconf _NPROCESSORS_ONLN 2> /dev/null || echo 0` + 1))
520 [ ${CT_PARALLEL_JOBS} -eq 0 ] && JOBSFLAGS="${JOBSFLAGS} -j${AUTO_JOBS}"
521 [ ${CT_PARALLEL_JOBS} -gt 0 ] && JOBSFLAGS="${JOBSFLAGS} -j${CT_PARALLEL_JOBS}"
522 JOBSFLAGS="${JOBSFLAGS} -l${CT_LOAD}"
524 # Now that we've set up $PATH and $CT_CFLAGS_FOR_HOST, sanity test that gcc
525 # is runnable so that the user can troubleshoot problems if not.
526 CT_DoStep DEBUG "Checking that we can run gcc -v"
527 CT_DoExecLog DEBUG "${CT_HOST}-gcc" -v
530 # Create a simple C program for testing.
531 testc="${CT_BUILD_DIR}/test.c"
532 printf "int main() { return 0; }\n" >"${testc}"
533 gccout="${CT_BUILD_DIR}/.gccout"
535 CT_DoStep DEBUG "Checking that gcc can compile a trivial program"
536 CT_DoExecLog DEBUG "${CT_HOST}-gcc" ${CT_CFLAGS_FOR_HOST} ${CT_LDFLAGS_FOR_HOST} "${testc}" -o "${gccout}"
540 if [ "${CT_WANTS_STATIC_LINK}" = "y" ]; then
541 CT_DoStep DEBUG "Checking that gcc can compile a trivial statically linked program (CT_WANTS_STATIC_LINK)"
542 CT_DoLog DEBUG "You may need to ensure that static libraries such as libc.a are installed on your system"
543 CT_DoExecLog DEBUG "${CT_HOST}-gcc" ${CT_CFLAGS_FOR_HOST} ${CT_LDFLAGS_FOR_HOST} "${testc}" -static -o "${gccout}"
548 if [ "${CT_CC_STATIC_LIBSTDCXX}" = "y" ]; then
549 CT_DoStep DEBUG "Checking that gcc can statically link libstdc++ (CT_CC_STATIC_LIBSTDCXX)"
550 CT_DoLog DEBUG "You may need to ensure that libstdc++.a is installed on your system"
551 CT_DoExecLog DEBUG "${CT_HOST}-gcc" ${CT_CFLAGS_FOR_HOST} ${CT_LDFLAGS_FOR_HOST} "${testc}" -static -lstdc++ -o "${gccout}"
557 # We need to save the real .config with kconfig's value,
558 # not our mangled .config.2 with arrays.
559 CT_DoLog EXTRA "Installing user-supplied crosstool-NG configuration"
560 CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}/bin"
561 CT_DoExecLog DEBUG install -m 0755 "${CT_LIB_DIR}/scripts/toolchain-config.in" "${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"
562 CT_DoExecLog DEBUG sed -i -e 's,@@grep@@,"'"${grep}"'",;' "${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"
563 bzip2 -c -9 .config >>"${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"
565 CT_DoStep EXTRA "Dumping internal crosstool-NG configuration"
566 CT_DoLog EXTRA "Building a toolchain for:"
567 CT_DoLog EXTRA " build = ${CT_REAL_BUILD}"
568 CT_DoLog EXTRA " host = ${CT_REAL_HOST}"
569 CT_DoLog EXTRA " target = ${CT_TARGET}"
570 set |grep -E '^CT_.+=' |sort |CT_DoLog DEBUG
571 CT_DoLog DEBUG "Other environment:"
572 printenv |grep -v -E '^CT_.+=' |CT_DoLog DEBUG
576 if [ -z "${CT_RESTART}" ]; then
577 CT_DoStep INFO "Retrieving needed toolchain components' tarballs"
578 do_companion_tools_get
580 do_companion_libs_get
588 if [ "${CT_ONLY_DOWNLOAD}" != "y" ]; then
589 if [ "${CT_FORCE_EXTRACT}" = "y" ]; then
590 CT_DoForceRmdir "${CT_SRC_DIR}"
591 CT_DoExecLog ALL mkdir -p "${CT_SRC_DIR}"
594 if [ "${CT_COMP_TOOLS}" = "y" ]; then
595 CT_DoStep INFO "Extracting, patching and installing companion tools"
596 do_companion_tools_extract
601 CT_DoStep INFO "Extracting and patching toolchain components"
603 do_companion_libs_extract
608 do_test_suite_extract
613 # Now for the job by itself. Go have a coffee!
614 if [ "${CT_ONLY_DOWNLOAD}" != "y" -a "${CT_ONLY_EXTRACT}" != "y" ]; then
615 # Because of CT_RESTART, this becomes quite complex
618 [ -n "${CT_RESTART}" ] && do_it=0 || do_it=1
619 # Aha! CT_STEPS comes from steps.mk!
620 for step in ${CT_STEPS}; do
621 if [ ${do_it} -eq 0 ]; then
622 if [ "${CT_RESTART}" = "${step}" ]; then
623 CT_DoLoadState "${step}"
628 CT_DoSaveState ${step}
629 if [ ${do_stop} -eq 1 ]; then
630 CT_DoLog ERROR "Stopping just after step '${prev_step}', as requested."
634 if [ ${do_it} -eq 1 ]; then
636 # POSIX 1003.1-2008 does not say if "set -e" should catch a
637 # sub-shell ending with !0. bash-3 does not, while bash-4 does,
638 # so the following line is for bash-3; bash-4 would choke above.
640 if [ "${CT_STOP}" = "${step}" ]; then
643 if [ "${CT_DEBUG_PAUSE_STEPS}" = "y" ]; then
644 CT_DoPause "Step '${step}' finished"
653 # From now-on, it can become impossible to log any time, because
654 # either we're compressing the log file, or it can become RO any
655 # moment... Consign all ouptut to oblivion...
656 CT_DoLog INFO "Finishing installation (may take a few seconds)..."
658 rm -f ${CT_PREFIX_DIR}/build.log.bz2
659 if [ "${CT_LOG_TO_FILE}" = "y" ]; then
660 cp "${tmp_log_file}" "${CT_PREFIX_DIR}/build.log"
661 if [ "${CT_LOG_FILE_COMPRESS}" = y ]; then
662 bzip2 -9 "${CT_PREFIX_DIR}/build.log"
665 if [ "${CT_INSTALL_DIR_RO}" = "y" ]; then
666 chmod -R a-w "${CT_INSTALL_DIR}"
668 # CT_TEST_SUITE_DIR may not exist if only downloading or extracting
669 if [ "${CT_TEST_SUITE}" = "y" -a -d "${CT_TEST_SUITE_DIR}" ]; then
670 chmod -R u+w "${CT_TEST_SUITE_DIR}"