"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Mon, 16 Jan 2012 23:45:16 +0100] rev 2840
configure: fix kconfig option names
In the process of converting to autoconf, the kconfig option
were not properly translated.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 17 Jan 2012 00:37:59 +0100] rev 2839
configure: also detect plain grep
We need just 'grep', and we need to be able to call it with 'grep -E'.
Check for 'grep', and bailout if egrep != grep -E
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Mon, 16 Jan 2012 23:36:42 +0100] rev 2838
scripts: fix tools override
The tools found by the new autostuff configure can contain arguments,
for example: grep -E
This needs separating the paths set for the Makfile from the paths
set for the scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Benoît Thébaudeau" <benoit.thebaudeau@advansee.com> [Fri, 13 Jan 2012 12:24:55 +0100] rev 2837
cc/gcc: update Linaro GCC revisions to 2012.01
Update Linaro GCC with the latest available revisions.
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Sun, 15 Jan 2012 01:04:26 +0100] rev 2836
kconfig: add missing files
The real sources for a few files are the lex/yacc/gperf
files, and the C files are only generated...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Sat, 14 Jan 2012 18:22:06 +0100] rev 2835
kconfig: install compiled frontends
The kconfig frontends are currently instaleld as source files. This is
a remnant of the early times, when I wanted a single installation of
crosstool-NG to be shared across multiple machines, potentially of
different architectures.
This does not really make sense, and it's been a long time since it
was las tpossible in practice.
So, just build the kconfig frontends at make-time, and install them
as we do for all other crosstool-NG dependent files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Mon, 07 Nov 2011 22:28:40 +0100] rev 2834
configure: use autoconf to generate configure
Create configure.ac, an autoconf script to generate ./configure
This will be needed by a subsequent patch to properly handle
--build and --host, and more tests, when the kconfig stuff will
be installed pre-built.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Thu, 12 Jan 2012 22:41:47 +0100] rev 2833
kernel/linux: update versions
A few newer versions, second shot in a row...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Sun, 08 Jan 2012 12:02:14 +0100] rev 2832
kernel/linux: update versions
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 03 Jan 2012 23:02:04 +0100] rev 2831
scripts: update config.{guess,sub}
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Sun, 01 Jan 2012 22:54:37 +0100] rev 2830
cc/gcc: copy file with 'cp -v', it rotates the progress bar
Installing the gcc test-suite can take a bit of time, so the
progress bar is currently not rotating because there is no
output during the copy. For an unsuspecting user, it could
mean the process hung.
With 'cp -v', the progress bar now rotates.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Sat, 31 Dec 2011 18:47:37 +0100] rev 2829
docs: credit Konrad EISELE for the initial multilib support
Konrad submitted an initial patch adding multlib support:
http://sourceware.org/ml/crossgcc/2011-11/msg00040.html
The patch was full of good ideas, but had a few issues, so
I (Yann E. MORIN) started it all from scatch, re-using part
of the original patch. This got implemented in this series:
hg log -r 446a17b5dd1e:e47d17391ae3
As I forgot to credit Konrad in these changelogs, update the
docs so that the work by Konrad gets credited. Without his
initial effort, we would probably not have had multlib support
so soon. Thank you Konrad!
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Wed, 28 Dec 2011 17:05:46 +0100] rev 2828
libc/glibc: cleanup CFLAGS handling
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 27 Dec 2011 16:11:34 +0100] rev 2827
libc/glibc: remove multi-dir
Remove the sysroot/${multi_dir} directory after the libc install.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 27 Dec 2011 14:45:03 +0100] rev 2826
libc/glibc: allow to selectively install headers and/or start-files
When doing multilib, we only need the headers from the default variant,
but we need the startfiles for each variants.
Allow the frontend to specify either one, or both.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Wed, 23 Nov 2011 00:11:36 +0100] rev 2825
libc/glibc: add multilib-cacpable backend
For mutlilib, the C library must be built once for each variants.
Special care must be taken to put the resulting libraries in
the proper places.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 22 Nov 2011 00:51:37 +0100] rev 2824
libc/glibc: fix code formatting
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 22 Nov 2011 00:16:37 +0100] rev 2823
libc/glib: pass installation subdir to backend
When building a multilib variant, install in a separate directory, to
avoid clutering the default or any other variant.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 22 Nov 2011 00:11:51 +0100] rev 2822
libc/glibc: set the endian option according to extra CFLAGS
When building a multilib, some extra CFLAGS can override the
default config option. This is the case for the endianness
selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Mon, 21 Nov 2011 23:56:53 +0100] rev 2821
libc/glibc: set the float option according to extra CFLAGS
When building a multilib, some extra CFLAGS can override the
default config option. This is the case for the floating point
selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Mon, 21 Nov 2011 23:33:08 +0100] rev 2820
libc/glibc: add extra CFLAGS when building the C library
When building multilib, we need extra CFLAGS that tell the compiler
to use non-default settings (eg. big/little endian, hard/soft float,
-march/cpu/tune flags, and so on...).
We have to pass these flags to the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Tue, 13 Dec 2011 11:51:07 +0100] rev 2819
libc/glibc: no default mode for backend
The caller SHALL explicitly ask for a nmode, and not rely on a default mode.
That's what actually happens, so we can get rid of the default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Fri, 30 Dec 2011 21:43:10 +0100] rev 2818
cc/gcc: print supported multilibs
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Wed, 23 Nov 2011 23:51:07 +0100] rev 2817
cc/gcc: build multilib
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Wed, 23 Nov 2011 23:27:12 +0100] rev 2816
binutils/binutils: build multilib
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Wed, 23 Nov 2011 23:25:43 +0100] rev 2815
config: add option to build multilib
Add a toolchain-wide option to enable multilib.
This is currently a noop, and will be implemented
in subsequent patches for each impacted components.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Sat, 31 Dec 2011 16:23:27 +0100] rev 2814
cc/gcc: add option to use system zlib
In some cases, it might be desirable to use the system zlib
Eg. because latest gcc seem to be totally borked when it comes
to multilib, and tries to build a multilib host zlib, when it
is *absolutely* *not* needed: we want mulitlib on the target,
not on the host! Sigh... :-(
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Fri, 30 Dec 2011 22:04:24 +0100] rev 2813
libc/uClibc: add latest version
Add 0.9.32.1
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Fri, 30 Dec 2011 14:16:49 +0100] rev 2812
kernel/linux: update to latest versions
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> [Fri, 30 Dec 2011 14:15:43 +0100] rev 2811
scripts: update config.guess and config.sub
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>