scripts: PARALLELMFLAGS is evil, rename

The reunification of the glibc/eglibc code paths exposed a nasty
bug in the glibc build: use of PARALLELMFLAGS breaks the build.

See the explanations in that bug report against FC6:
https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=212111

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: commonalise assembling the list of addons

glibc and eglibc each have two very similar ways of building this list.
This can, and should definitetly, be shared.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: commonalise setting of the minimum supported kernel version

It will be possible to use that also with eglibc, so this hunk belongs to
the common code.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: use the common start_files procedure

Use the common procedure, shared between glibc and eglibc. This requires
that glibc-specific bits be included in the shared procedure.

But still build the full libc with the glibc-specific procedure. This will
be commonalised in a future commit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: cleanup common code for sharing with glibc

Some stuff is eglibc-specific, so needs to be conditonal.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: move generic code to a common file

The build procedure for eglibc is generic enough to
be shared between glibc and eglibc. This includes:
- headers install (empty!)
- start files build
- complete libc build
- libc finish (empty!)
- add-ons list

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/mingw: move content of do_libc_headers into do_libc_start_files

It is unnecessary to split C library preparation into two steps, as only
one really makes sense. So, do_libc_headers is bound to be withdrawn
short-term, in favor of do_libc_start_files.

mingw already had all its start files installation in do_libc_headers, and
do_libc_start_files was empty, just migrate the content of the former into
the latter.


Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/uClibc: move content of do_libc_headers into do_libc_start_files

It is unnecessary to split C library preparation into two steps, as only
one really makes sense. So, do_libc_headers is bound to be withdrawn
short-term, in favor of do_libc_start_files.

uClibc already had all its start files installation in do_libc_headers, and
do_libc_start_files was empty, just migrate the content of the former into
the latter.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc-glibc: remove 2.3.6

This is an obsolete version which is no longer used by any sample (the only
user, the ia64 sample, has been removed).

It also makes the code path a bit complex, with twists just to accomodate
that version. Removing the version will make those twists go away, and
will ease commonalisation of glibc and eglibc in the future (hopefully!).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

arch: remove ia64

ia64 is broken in every gcc/glibc combinations I tested (except for the
existing sample that used very old versions).

Nobody complained on the list about not being able to build recent versions.

So the only way forward I can see is to remove the architecture altogether.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: simplify the download URL

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: longterm kernel location changed

The location of the longterm Linux kernels on FTP has changed.
Here is a simple (but not very versatile) fix.

Signed-off-by: "Björn A. Herwig" <herwig@gdsys.de>
[yann.morin.1998@anciens.enib.fr: make it generic/versatile]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/cloog: regenerate autostuff files

Latest version of CLooG does not have properly generated autoconf files,
so they need to be regenerated before the call to ./configure

Signed-off-by: "Ilya A. Volynets-Evenbakh" <ilya@total-knowlege.com>
[yann.morin.1998@anciens.enib.fr: make it conditional on 0.15.10 only]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 32c7bbfa3f6514a0fbd5a7388d33e664ba62ed89)

complibs/cloog: regenerate autostuff files

Latest version of CLooG does not have properly generated autoconf files,
so they need to be regenerated before the call to ./configure

Signed-off-by: "Ilya A. Volynets-Evenbakh" <ilya@total-knowlege.com>
[yann.morin.1998@anciens.enib.fr: make it conditional on 0.15.10 only]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.9: update version to 1.9.2+hg

Tagging release 1.9.2

1.9: update version to 1.9.2

debug/ltrace: fix building for mips

ltrace 0.5.3 currently fails to build for target mips because MY_TARGET
(introduced by patches/ltrace/0.5.3/150-allow-configurable-arch.patch)
is set to 'mips' via CT_ARCH, while the mips specific stuff in ltrace
(0.5.3) is stored under sysdeps/linux-gnu/mipsel:

result: *** No rule to make target `mips/arch.h', needed by `sysdep.h'.
Stop.

The following patch fixes this issue

Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: reformat commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 2115901c7f07181d92ddbd7dd7ebeaa72e4fb176)

cc/gcc: fix building of ecjx

When building ecjx, the compiler for the build system must
be used, not for the compiler for the host system.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from fc967527069089dc376840cd1e51cd26eb56fc32)

complibs/libelf: build with -fPIC

libelf is used by gcc to build the lto-plugin used
by binutils' gold to perform LTO.

This requires that files in libelf be compiled with
-fPIC to generate a proper .so.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from c48aba92cbeb7b7dce956a63ec65d3296735cc16)

debug/gdb: fix for psim build failure due to -lz in gdb-7.2.

Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: fix space-damage]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 78286fe70b62cee395bc603a5e44ef136c4531e3)

internals: properly remove all docs

Part of the installed doc was not removed (if configured to).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from cb0f625b3f9f704140aaeed024baac05e6b27df0)

debug/ltrace: fix building for mips

ltrace 0.5.3 currently fails to build for target mips because MY_TARGET
(introduced by patches/ltrace/0.5.3/150-allow-configurable-arch.patch)
is set to 'mips' via CT_ARCH, while the mips specific stuff in ltrace
(0.5.3) is stored under sysdeps/linux-gnu/mipsel:

result: *** No rule to make target `mips/arch.h', needed by `sysdep.h'.
Stop.

The following patch fixes this issue

Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: reformat commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: update i686-nptl-linux-gnu

Enable Java and Fortran frontends.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix building of ecjx

When building ecjx, the compiler for the build system must
be used, not for the compiler for the host system.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: update i686-nptl-linux-gnu

Notable changes:
- uses binutils 2.21, builds gold, but defaults to ld
- uses gcc 4.5.2, with GRAPHITE and LTO, builds lto-plugin

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: build lto-plugin if binutils' gold is built

To properly enable LTO with gold, gcc has to install a plugin that gold
uses to handle the LTO information.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add wrapper to gold and ld

When both gold and ld are installed, add a wrapper that calls
to either gold or ld.

In case the wrapper is installed, we also need to symlink ld.bfd
and ld.gold for the core_cc steps.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add support for threaded gold

When configured with support for threads, gold can link in
parallel, possibly cooperating with a make jobserver.

Add an option enabling threads.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>