1.11: update version to 1.11.4

configure: add yet a bit more of autostuff compatibility

Well, at least it helps buildroot! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 9409fe04bb7ced9b228d6cce40d64ffbc41a964c)

scripts, cc/gcc: do not fail on existing symlinks or build.log

If the user builds a toolchain over an existing one, so, without removing
CT_PREFIX_DIR, the build fails as the symlinks already exist, as does the
build.log.

This can also happen (for build.log) if the user first ran in download-
or extract-only.

Patch (with no SoB) originally from:
Phil Wilshire <phil.wilshire@overturenetworks.com>

Modified by me as it did not apply cleanly.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 1ebc2248cc60230cd53ff94ae8f8f1e3261461a3)

scripts/internals: do not remove lib{32,64}/ symlinks after build

During the build, we create lib{32,64}/ symlinks out of the sysroot.
In some cases (eg. mingw32 target), these symlinks are still required
when running the toolchain. For other combinations, the symlinks are
without incidence, so they can be safely kept after the build.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 751c3f735ada4a95aa981841b832adb08b88ce27)

scripts: on startup, also remove the buildtools dir

In case there's one lingering around (whether the previous build was
successful, or failed), we have to remove the buildtools directory
as well as the toochain build dir.

This should also fix the case where out makeinfo wrapper calls
itself recursively.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 0e8ff57073838afea8830fe09d1d01cdf7cb37d8)

cc/gcc: fix passing args with spaces when calling core gcc

Spaces in arguments to the core gcc backend were not handled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 7cce5c8fc79a62bca1e448fc721e7209ac85d204)

cc/gcc: remove --enable-symver option

That option is coming from the original crosstool, and is not entirely
understand here.

Moreover, it breaks with newer gcc-s: 4.6.1 now breaks while configuring
libjava (and probably some other libs as well, untested).

There is an related bug report to the gcc BZ:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49555

If need be, the old behavior can be restored with:
CC_CORE_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
CC_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"

Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from b24ead1a59472195f5b2071ff70664c36fa21c3f)

libc/glibc: fix {e,}glibc add-ons with short or long names

Fixes the issue with {e,}glibc addons having short and long names (such as
eglibc-ports-2_13 and ports), which caused configure scripts to run
through them twice and thus configuring incorrectly.

For instance, the mips64el-n32-linux-gnu toolchain would be recognized
correctly first, but then the second pass would change it to mips32,
building a mixed MIPS-III N32 and MIPS-I libc.

Signed-off-by: Nicolás Reynolds <fauno@kiwwwi.com.ar>
[yann.morin.1992@anciens.enib.fr: remove spurious trailing spaces]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from af25723a794f2017f45c300369a6d36849e22236)

debug/gdb: fix runtime sysroot

This patch sets the runtime sysroot to fix the following GDB warning:
"Unable to find dynamic linker breakpoint function.
GDB will be unable to debug shared library initializers
and track explicitly loaded dynamic code."

The sysroot can later be changed within gdb with the `set sysroot`
command if necessary.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
(transplanted from 7690196856ce4a4700d1887cc3adf80acc627c52)

configure: add yet a bit more of autostuff compatibility

Well, at least it helps buildroot! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts, cc/gcc: do not fail on existing symlinks or build.log

If the user builds a toolchain over an existing one, so, without removing
CT_PREFIX_DIR, the build fails as the symlinks already exist, as does the
build.log.

This can also happen (for build.log) if the user first ran in download-
or extract-only.

Patch (with no SoB) originally from:
Phil Wilshire <phil.wilshire@overturenetworks.com>

Modified by me as it did not apply cleanly.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: fix missing arg to one printf

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: don't pass random format to printf

Although proabaly inoffensive in our case, do not pass un-checked
formats to printf.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: print end of current action

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: fix typo

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: do not build libgomp or libmudflap in the core steps

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/internals: do not remove lib{32,64}/ symlinks after build

During the build, we create lib{32,64}/ symlinks out of the sysroot.
In some cases (eg. mingw32 target), these symlinks are still required
when running the toolchain. For other combinations, the symlinks are
without incidence, so they can be safely kept after the build.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: on startup, also remove the buildtools dir

In case there's one lingering around (whether the previous build was
successful, or failed), we have to remove the buildtools directory
as well as the toochain build dir.

This should also fix the case where out makeinfo wrapper calls
itself recursively.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: fix passing args with spaces when calling backend

Spaces in arguments to the glibc backend were not handled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix passing args with spaces when calling core gcc

Spaces in arguments to the core gcc backend were not handled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: add check for svn

svn is needed to downlod eglibc, so we require it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/newlib: add latest version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: update config.{guess,sub}

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: move multi-line shell commands from Makefile to script

Maintaining thos multi-line shell commands in a Makefile rule is
a real PITA.

Move the two affected rules (build_gen_choice_in and build_gen_menu_in
to a shell script.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: add 2.14

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: do not require cvs

cvs is used to get newlib directly from its repository. Missing cvs
will only allow getting newlib from the released tarballs.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: portability fixes - take 2

It is useful to sometime run on a strictly POSIX-compliant
shell... :-/

And it is sometime interesting to refresh Q-patches before
finishing the series... :-(

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: portability fixes

It is useful to sometime run on a strictly POSIX-compliant shell... :-/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix non-MIPS builds

The new MIPS-specific options are not valid for other targets.
Also, move the arch-specific setting lower in the extra_config setting.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs/C : libncurses is not needed anymore

macports libncurses was required only on SL 10.6.3

docs/C : use new URL in hg tutorial

ct-ng has moved, update documentation

config/config.mk: call sed in the Right Way

calling sed as sed destroys portability.
call sed as $(sed) in makefiles before the build process is started.

configure: do not test for static libs if static link is impossible

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: pass the allowed lib extensions to check_for()

Rather than building all possible library names in the caller,
lets just do it once in check_for.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: disable static linking on Darwin

Static liunking is not supported on Darwin, so hide the corresponding
options when the build machine is Darwin.

Reported-by: Andrea Franceschini <therealmorpheu5@gmail.com>
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reported-by: "Titus von Boxberg" <titus@v9g.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: check host system

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: indent error/warning message

Indent the error/warning message so that it is explicit that
the second line is giving details for the first general hint.

Reported-by: Titus von Boxberg <titus@v9g.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add MIPS spercific configure options

Add the following MIPS specific options when configuring gcc:
--with(out)-llsc
--with(out)-synci
--with(out)-mips-plt
--with-divide=type

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add option for linker hash style

Add an option to specify the hash type that gcc will ask the linker to use.
It is a provision for the upcoming 4.7, as no version currently supports it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add build-id option

Add an option to configure gcc with --enable-linker-build-id.

Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: Add option that allows for getting svn over http://

Instead of getting eglibc over standard svn://svn.eglibc.org
Add an option that allows the user to get source from
http://www.eglibc.org/svn

This is useful if you are behind a firewall or proxy.
If you are behind a proxy, don't forget to configure
${HOME}/.subversion/servers

In the [global] section setup your proxy configuration.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@anciens.enib.fr: removed useless 'default n']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: remove --enable-symver option

That option is coming from the original crosstool, and is not entirely
understand here.

Moreover, it breaks with newer gcc-s: 4.6.1 now breaks while configuring
libjava (and probably some other libs as well, untested).

There is an related bug report to the gcc BZ:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49555

If need be, the old behavior can be restored with:
CC_CORE_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
CC_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"

Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/uClibc: add latest release 0.9.32 + patchset

The patchset was obtained by dumping each changeset on the
upstream 0.9.32 branch since the release:
git log v0.9.32..origin/0.9.32 |sed -r -e '/^commit/!d; s/.* //;' |tac

and then creating a patch from each changeset.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config/kernel: Update kernel versions

Add 2.6.39.2
Update 2.6.34 to 2.6.34.10
Update 2.6.33 to 2.6.33.15
Update 2.6.32 to 2.6.32.42

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

cc/gcc: Update gcc versions

Add gcc 4.6.1, 4.3.6, and 4.5.3.
Move 4.4.6 version string so that it is in order.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

glibc: Refactor startfiles/headers into do_libc_backend()

Refactor the contents of 'do_libc_start_files()' and 'do_libc()' into a
parameterized 'do_libc_backend()'. 'do_libc_start_files()' and 'do_libc()'
call 'do_libc_backend()' with either 'libc_mode=startfiles' or
'libc_mode=final' (respectively) so that the startfiles/headers and
the final libc builds are configured and built with the same options.

One example of where this is needed is when building a mips toolchain.
Previously, if you were building an n32 toolchain, you wouldn't have
noticed an issue, because if '-mabi' is not in CFLAGS, n32 is the
default:

http://sourceware.org/git/?p=glibc-ports.git;a=blob;f=sysdeps/mips/preconfigure;hb=HEAD

But when trying to build an o32 or n64 toolchain the build would
have failed. This is because (e)glibc expects "-mabi={o32,n32,n64}" to be
in CFLAGS, but was not previously provided in 'do_libc_start_files()'.
The build failure would happen in the shared-core gcc when it tries to
configure an n64 or o32 gcc with an n32 libc.

A simpler solution would have been to just add TARGET_CFLAGS to configure
in 'do_libc_start_files()', but this way makes configure and make
consistent for both steps.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

kernel/linux: fix type in version strings

I missed refreshing the patch before pushing. :-(

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config/kernel: Update linux kernel versions

Add 2.6.39.1
Drop 2.6.38-2.6.38.6 provide the latest 2.6.38.8
Update longterm trees:
* 2.6.33 is 2.6.33.14
* 2.6.32 is 2.6.32.41

config/eglibc: Add eglibc-2_14 branch

Eglibc-2_14 has been branched.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

samples: add mips-malta-linux-gnu toolchain config

cc/gcc: bump Linaro GCC revisions to 2011.06-0

This patch bumps the Linaro GCC revisions to 2011.06-0 when applicable.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

configure: check for ncurses libs + headers in one go

./configure now has the possibility to check for libraries and headers
in one go, so we can use it! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/cross-gdb: check host dependencies

Cross-gdb depends on expat and python. If either is missing, cross-gdb will
build successfully, but lacking some features.

Especially, if expat is missing, cross-gdb will be unable to parse the target
description, which may lead to runtime malfunctions and the following GDB
warning:
"Can not parse XML target description; XML support was disabled at compile time"

Hence, expat should be considered mandatory.

On the other hand, the features missing without python are not critical, so
python should not be considered mandatory.

This patch does the following:
- At configure time, warn the user if either expat or python is missing.
- In menuconfig, disable the static build options regarding cross-gdb if no
static version of expat is available, and disable cross-gdb if expat is
missing.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@anciens.enib.fr: add comment for impossible static cross-gdb]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: give check_for() the ability to test several item types at once

Currently, check_for() can only test one of prog, inc or lib at once. This patch
removes this limitation.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

configure: rationalise error messages with meaningful texts

Currently, error messages just state the obvious: a required
component is required. While in some cases, there is not much
else to say, in some other cases we could tell much more.

For example, a missing libstdc++ means no static toolchain.

Also, format error and warning messages in a similar fashion,
with a {error,warning} intro, followed by the message specified
by the caller.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

Makefile: make it work for auto-completion

The latest autocompletion calls 'make -qp' to get all the possible
targets. This currently fails, as our makefile is calling itself
again and again ad-libitum.

Fix it by detecting that the recursion level is not 0, and bail out
if so. It works so well that it has the side effect of showing only
the 'public' target, and hide our internal ones! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: do not try to download NPTL add-on

The NPTL add-on has always been internal, so there is no
reason to try downloading it, it will never succeed.
Add provision to skip other add-ons as well.

For consistency, do the same test in both glibc and eglibc.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kconfig: prepend CT-NG's version tag to PKGVERSION

"crosstool-NG-${CT_VERSION}" is currently the default for TOOLCHAIN_PKGVERSION,
and this options is passed as is to --with-pkgversion.

This patch prepends "crosstool-NG ${CT_VERSION}" to TOOLCHAIN_PKGVERSION before
passing it to --with-pkgversion.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

functions: save & restore the static companion libraries install dir

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

functions: fix downloading files

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: CC_STATIC_LIBSTDCXX 'depends on' CONFIGURE_has_static_libstdcpp

Hide the staticaly linked libstdc++ option if the static libstdc++ is not
present, detected at configure time.

Add a blind option that says whether static linking is possible at all.
It defaults to 'y', but depends on the needed CONFIGURE_* options. For
now, it only depends on static libtdc++, but new dependencies can be
easily added.

Hide the global static toolchain option behind this new option.

Original patch by Bryan Hundven <bryanhundven@gmail.com>

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: check for libstdc++.{so,dylib,a}

It's probably a good thing to check for at least one instance of
libstdc++.{so,dylib,a} at configure time. At least one is needed
by the companion libraries and gcc.

Original patch by Bryan Hundven <bryanhundven@gmail.com>

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: add prefix to err messages in has_or_{abort,warn}

Make it easier to spot messages spewed out by has_or_{abort,warn}.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: maintain single quotes in error messages

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

glibc: properly handle internal addons

Some addons are bundled with glibc/eglibc, so we should not try to
download and extract them.

This is done as thus:
- at download time:
- if the add-on download fails, keep going;
- at extract time:
- if the addon is present in the source tree, ignore it;
- if the addon is missing in the source tree:
- if the archive is present, extract it;
- if the archive is missing, bail out.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: use generic SVN functions

eglibc is only available from SVN. The script currently calls svn
in its own tortuous and convoluted way.

Use the egeneric SVN extract functions, and sinplify the eglibc
download function.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: do not abort on failed svn

In case of eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).

So we do not want to fail if an add-on can't be downloaded; we
want to post-pone the check until we can extract the main archive.

So:
- try to retrieve the add-on
- if it fails, print a warning instead of calling CT_Abort
- return 1

So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.

Bonus: it works without changing any existing retrieval procedure! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: do not abort on failed extract

For glibc/eglibc, if the add-on can not be extracted, we want to catch
the error to print a meaningful error message.

So:
- try to extract the tarball
- if it fails, print a waring instead of calling CT_Abort
- return 1

So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.

Bonus: it works without changing any existing extract procedure! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: do not abort on failed download

In case of glibc/eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).

So we do not want to fail if an add-on tarball can't be downloaded; we
want to post-pone the check until we can extract the main archive.

So:
- try to download the tarball
- if it fails, print a warning instead of calling CT_Abort
- return 1

So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.

Bonus: it works without changing any existing retrieval procedure! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix a misleading FIXME

The FIXME about the static libstdc++ is misleading; it only deserves
being an INFO.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

gdb: use the PKGVERSION and BUGURL options

This patch makes gdb benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

eglibc: use the PKGVERSION and BUGURL options

This patch makes eglibc benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

binutils: use the PKGVERSION and BUGURL options

This patch makes binutils benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

gcc: promote PKGVERSION and BUGURL options to toolchain level

This patch promotes the PKGVERSION and BUGURL options to toolchain level so that
all toolchain components supporting them can benefit from them.

These options are passed to configure through --with-pkgversion and
--with-bugurl.

They are supported by binutils 2.18+, gcc 4.3+, eglibc 2.9+ and gdb 7.0+.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

gcc: add a CC_GCC_HAS_PKGVERSION_BUGURL option

This patch adds a blind option CC_GCC_HAS_PKGVERSION_BUGURL to test the support
of --with-pkgversion and --with-bugurl by GCC's configure.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

scripts/addToolVersion.sh: add a function to extract fields from versions

This patch adds a function to extract major, minor, revision, etc. from version
numbers.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

kconfig: remove useless 'default n'

kconfig bools are disabled by default, so specifying 'default n' is useless and
noisy. This patch removes all occurrences of 'default n'.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

libc/glibc: commonalise extraction btw glibc and eglibc

glibc and eglibc have a very similar extraction process, so it
makes sense to commonalise it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: fix {e,}glibc add-ons with short or long names

Fixes the issue with {e,}glibc addons having short and long names (such as
eglibc-ports-2_13 and ports), which caused configure scripts to run
through them twice and thus configuring incorrectly.

For instance, the mips64el-n32-linux-gnu toolchain would be recognized
correctly first, but then the second pass would change it to mips32,
building a mixed MIPS-III N32 and MIPS-I libc.

Signed-off-by: Nicolás Reynolds <fauno@kiwwwi.com.ar>
[yann.morin.1992@anciens.enib.fr: remove spurious trailing spaces]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: add possibility to set arbitrary variable in check_for

If check_for is able to find the required prog/inc/lib, allow it to
set an arbitrary variable to 'y'. This variable is then pushed down
to the kconfig definition.

For example:
has_or_abort prog=foobar kconfig=has_foobar

If foobar is available, it yields a kconfig variable defaulting to y:
config CONFIGURE_has_foobar
bool
default y

If foobar is missing, it yields a kconfig variable defaulting to n:
config CONFIGURE_has_foobar
bool

Thus it is possible to depends on that variabel to show/hide options:
config SOME_FEATURE
bool
prompt "Some feature"
depends on CONFIGURE_has_foobar

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: add has_or_warn

By popular request, add a function to only warn on missing stuff.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: move error message down to has_or_abort

When has_or_warn will come, we do want to print the error message
only in has_or_abort, so move it down there.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: bump Linaro revision to 2011.05-0

This patch bumps the Linaro GDB revision to 2011.05-0.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

cc/gcc: bump Linaro revisions to 2011.05-0

This patch bumps the Linaro GCC revisions to 2011.05-0 when applicable.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

debug/gdb: fix runtime sysroot

This patch sets the runtime sysroot to fix the following GDB warning:
"Unable to find dynamic linker breakpoint function.
GDB will be unable to debug shared library initializers
and track explicitly loaded dynamic code."

The sysroot can later be changed within gdb with the `set sysroot`
command if necessary.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

scripts: fix broken variable name

This patch fixes a config variable name missing its 'CT_' prefix.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

kconfig: fix forward dependencies

In case a set of options are conditional to two different paths,
the forward dependencies in these options is wrong, but in the
first path.

Fix by Arnaud Lacombe on linux-kbuild ML:
http://www.spinics.net/lists/linux-kbuild/msg04832.html

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.11: update version to 1.11.3+hg

Tagging release 1.11.3

1.11: update version to 1.11.3

config: document array-capable variables

Update help entries for thos variables that accept multiple
arguments with spaces (aka. array-capable variables).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: munge .config to handle array variables

Transfrom array variables from pure strings (in the kconfig output)
into proper bash arrays declarations, for feeding to the build scripts.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

config: rename variables that are arrays

Make it explicit that a variable is an array bu the name of the variable.
It will be used later when .config gets munged to allow both multiple
arguments and arguments with spaces at the same time to be passed from the
configuration down to the build scripts.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: interpret *_EXTRA_CONFIG config variables arrays

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/ppl: fix 0.11-0.11.2 to compile with --disable-shared

PPL 0.11 (through 0.11.2) had a small bug where it still tried to build
and test its Java interface even when shared libraries are disabled.
Since that's exactly what ct-ng does, it explodes.

This is the patch from the PPL authors (see final link below).

More information can be found in these messages/threads:

Anthony's initial report and analysis with Yann:
http://www.cygwin.com/ml/crossgcc/2011-05/msg00046.html

Ron Flory hit the same problem:
http://www.cygwin.com/ml/crossgcc/2011-05/msg00054.html

Anthony's report to the ppl-devel list:
http://www.cs.unipr.it/pipermail/ppl-devel/2011-May/017450.html

Roberto's reply with a link to the fix in the PPL git repo:
http://www.cs.unipr.it/pipermail/ppl-devel/2011-May/017455.html

Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
(transplanted from 139b85d70b623e51f7585e7c64ecb8c6a6cf4567)

complibs/ppl: build only C and C++ interfaces for PPL

By default, PPL wants to build interfaces for any of a variety of
langauges it finds on the local host (python, java, possibly perl, also
more esoteric languages such as ocaml and prolog).

These extra interfaces can double the compile time for the library. For
single-process builds, I found a savings of more than 40%:

default / j1: 716s total, 143.2s avg, 0.52s stdev
just_c / j1: 406s total, 81.2s avg, 0.33s stdev
just_c_cpp / j1: 413s total, 82.6s avg, 0.22s stdev

And for multi-process builds, it approached 50%:

default / j4: 625s total, 125.0s avg, 0.57s stdev
just_c / j4: 338s total, 67.6s avg, 1.25s stdev
just_c_cpp / j4: 327s total, 65.4s avg, 0.36s stdev

Since the PPL we build within ct-ng is only used by GCC, we only need to
build the C and C++ interfaces.

Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
(transplanted from ec30b191f0e3fe9bc73199f0bcb8d789db17aa92)

complibs/ppl: update GMP location configuration argument for PPL v0.11 and later

'configure' for PPL 0.11 (and later) needs "--with-gmp-prefix" to
provide the location of the GMP toolkit; the previous switches were
"--with-libgmp-prefix" and "--with-libgmpxx-prefix".

The upstream log message is:

commit 08dfb6fea094f8c5a533575a3ea2095edce99a6d
Author: Roberto Bagnara <bagnara@cs.unipr.it>
Date: Sun Jul 12 21:39:46 2009 +0200

New configure option --with-gmp-prefix supersedes the (now removed)
options --with-libgmp-prefix and --with-libgmpxx-prefix.

Link: http://www.cs.unipr.it/git/gitweb.cgi?p=ppl/ppl.git;a=commit;h=08dfb6fea094f8c5a533575a3ea2095edce99a6d

Since PPL's 'configure' ignores unknown switches, we use all three so we
don't have to conditionalize the ppl.sh build script itself.

Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
(transplanted from 4f0c4fb572e2862c24b28e8d27ce7e9cb9adba65)

complibs/ppl: fix 0.11-0.11.2 to compile with --disable-shared

PPL 0.11 (through 0.11.2) had a small bug where it still tried to build
and test its Java interface even when shared libraries are disabled.
Since that's exactly what ct-ng does, it explodes.

This is the patch from the PPL authors (see final link below).

More information can be found in these messages/threads:

Anthony's initial report and analysis with Yann:
http://www.cygwin.com/ml/crossgcc/2011-05/msg00046.html

Ron Flory hit the same problem:
http://www.cygwin.com/ml/crossgcc/2011-05/msg00054.html

Anthony's report to the ppl-devel list:
http://www.cs.unipr.it/pipermail/ppl-devel/2011-May/017450.html

Roberto's reply with a link to the fix in the PPL git repo:
http://www.cs.unipr.it/pipermail/ppl-devel/2011-May/017455.html

Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>

complibs/ppl: build only C and C++ interfaces for PPL

By default, PPL wants to build interfaces for any of a variety of
langauges it finds on the local host (python, java, possibly perl, also
more esoteric languages such as ocaml and prolog).

These extra interfaces can double the compile time for the library. For
single-process builds, I found a savings of more than 40%:

default / j1: 716s total, 143.2s avg, 0.52s stdev
just_c / j1: 406s total, 81.2s avg, 0.33s stdev
just_c_cpp / j1: 413s total, 82.6s avg, 0.22s stdev

And for multi-process builds, it approached 50%:

default / j4: 625s total, 125.0s avg, 0.57s stdev
just_c / j4: 338s total, 67.6s avg, 1.25s stdev
just_c_cpp / j4: 327s total, 65.4s avg, 0.36s stdev

Since the PPL we build within ct-ng is only used by GCC, we only need to
build the C and C++ interfaces.

Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>

complibs/ppl: remove unnecessary (and confusing) --enable-cxx configure switch.

PPL does not use the "--enable-cxx" configure switch at all; it's
possibly a cut-and-paste leftover from 'gmp.sh'. (PPL is written in C++
natively, so it doesn't make much sense to have to enable C++; GMP, on
the other hand, is written in C with an optional C++ wrapper.)

Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>

complibs/ppl: update GMP location configuration argument for PPL v0.11 and later

'configure' for PPL 0.11 (and later) needs "--with-gmp-prefix" to
provide the location of the GMP toolkit; the previous switches were
"--with-libgmp-prefix" and "--with-libgmpxx-prefix".

The upstream log message is:

commit 08dfb6fea094f8c5a533575a3ea2095edce99a6d
Author: Roberto Bagnara <bagnara@cs.unipr.it>
Date: Sun Jul 12 21:39:46 2009 +0200

New configure option --with-gmp-prefix supersedes the (now removed)
options --with-libgmp-prefix and --with-libgmpxx-prefix.

Link: http://www.cs.unipr.it/git/gitweb.cgi?p=ppl/ppl.git;a=commit;h=08dfb6fea094f8c5a533575a3ea2095edce99a6d

Since PPL's 'configure' ignores unknown switches, we use all three so we
don't have to conditionalize the ppl.sh build script itself.

Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>

1.11: update version to 1.11.2+hg

Tagging release 1.11.2

1.11: update version to 1.11.2

libc/glibc: source common parts instead of symlinking

Symlinks are a nightmare when one is grepping...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kconfig: add the nconf frontend

The nconf frontend is the new hot topic in the kconfig land! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: use the multi-inclusion capability of the new kconfig

Now that kconfig can include a file multiple times, link the glibc/eglibc
common stuff to two .in.2 files.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kconfig: remove mis-leading messages

Unlinke the Linux kernel, crosstool-NG does not (directly) use make
as a frontend, so remove any occurence of reference to running make
after the configuration.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kconfig: fix choice multi-display

In case a choices has different combinations, it can be displayed
more than once.

See the discussion thread on the linux-kbuild ML:
http://www.spinics.net/lists/linux-kbuild/msg04709.html

The fix applied here was proposed by Arnaud LACOMBE.
That fix, or a similar one, will probably be pushed upstream soon.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kconfig: don't trim spaces with leading pipe

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kconfig: do not warn on missing env variable

In crosstool-NG, we use env variables for the backend mode.
So it is perfectly legit that these variables are not set.
So do not warn about it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kconfig: update from linux-next

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: add main menu title

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: reorder stuff

Yet another reordering...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: add generated help entries only if present

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: fix recursive deps

The latest kconfig stuff is more stringent when it comes to validating
the dependency of the symbols. It is no longer possible to have a symbol
depend on itself (such as our construct for arch/cc/libc/... was doing).

Fix our generated-file infrastructure to avoid these situations when the
new kconfig stuff will be merged (in a following changeset).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/addToolVersion: fix gcc complibs dependency

Since the gcc configuration changes, the way to select the
dependent companion libraries has changed.

Update the addToolVersion script to match.

Reported-by: Xun Li <lxfind@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 4cd9cda2265c0c76df3d4ff77a2f3461aae3bc9f)

cc/gcc: fix complibs dependency

Since the gcc configuration changes, the way to select the
dependent companion libraries has changed. The addToolVersion
script was not updated to match, and a new gcc version was
added with this script.

Fix the gcc version; the script will be updated in a subsequent
changeset.

Reported-by: Xun Li <lxfind@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 79947df7ec4b482297ba90c3fe77314336d200e5)

scripts/addToolVersion: fix gcc complibs dependency

Since the gcc configuration changes, the way to select the
dependent companion libraries has changed.

Update the addToolVersion script to match.

Reported-by: Xun Li <lxfind@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix complibs dependency

Since the gcc configuration changes, the way to select the
dependent companion libraries has changed. The addToolVersion
script was not updated to match, and a new gcc version was
added with this script.

Fix the gcc version; the script will be updated in a subsequent
changeset.

Reported-by: Xun Li <lxfind@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

sample: add new Alpha sample with glibc-.13

Sample provided by Ioannis E. VENETIS

Reported-by: "Ioannis E. Venetis" <venetis@mail.capsl.udel.edu>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: add 2.13

Patchset provided by "Ioannis E. Venetis" <venetis@mail.capsl.udel.edu>
http://sourceware.org/ml/crossgcc/2011-04/msg00072.html
http://sourceware.org/ml/crossgcc/2011-04/msg00073.html

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: update patchset, add ports patchset

Patchset provided by "Ioannis E. Venetis" <venetis@mail.capsl.udel.edu>
http://sourceware.org/ml/crossgcc/2011-04/msg00072.html
http://sourceware.org/ml/crossgcc/2011-04/msg00073.html

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/mpfr: add latest version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/cloog: add latest version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.11: update version to 1.11.1+hg

Tagging release 1.11.1

1.11: update version to 1.11.1

internals: fix stripping yet once again

Fix typo introduced by changeset #055e505f28be.
Also, handle older versions of gcc (typically, all versions
prior to 4.0.0).

Maxime provided a similar patch, missing the case for the
legacy versions of gcc.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 539a3fa894f00888b02c7f89a2046f02c9d51e75)

internals: fix stripping yet once again

Fix typo introduced by changeset #055e505f28be.
Also, handle older versions of gcc (typically, all versions
prior to 4.0.0).

Maxime provided a similar patch, missing the case for the
legacy versions of gcc.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.11: update version to 1.11.0+hg

Tagging release 1.11.0

1.11: create maintenance branch, update version to 1.11.0

samples: update

Release is coming soon... Time to update samples...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

internals: fix stripping canadians

We can't run the newly built gcc when it is a canadian cross.
Thus, we can't get the version number, and thus we can't get
the directory libexec subdirectory to strip.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: fix installation

Changeset e013ddebc063 forgot to install the samples.mk file.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: uninstall the man page

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: fix installing samples

It's been a while now that the working directory CT_WORK_DIR has
been changed from 'targets' to '.build'. Fix the install procedure
to properly tweak the installed samples.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: fix Linaro version string

Last update missed updating the version string.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: small help fix up for work dir default

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: add latest Linaro version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: hide Linaro options by default

It can be quite confusing for a new-comer to find strange
version numbers for gdb, so hide the Linaro versions by
default.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add latest Linaro versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: suffle options around

Move options around so it feels more organised.
Add comments to separate groups of related options.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: reorder the kernels sub-menu

Re-organise the sub-menu so that:
- the kernels list comes first,
- followed by kernels generic options
- followed by kernels specific options

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: reorder the architectures sub-menu

Re-organise the sub-menu so that:
- the archs list comes first,
- followed by archs generic options
- followed by archs specific options

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/addToolsVersion: versions can be either in the .in or the .in.2

The components have their version selection handled either in the .in
file or the .in.2 file. Handle both cases.

Also, when dumping an existing version, keep the user's grep options
(ie. do override neither options nor colors).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: add a new sample for ARM Cortex-A15 with VFP/NEON

Sample origiannly reported and provided by dsreed on the #crostool-ng
channel on freenode. I don't have the real ID for dsreed, but the
sample is not orginally mine, but his/hers.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/uClibc: use MMU settings

Enforce the MMU settings from the crosstool-NG configuration.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: small eye-candy in the wiki table

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

internals/finish: do not remove ${PREFIX}/include

gcc installs the C++ headers in ${PREFIX}/include/ but we trash
that directory at the end of the build.

We previously removed that directory as it contained the companion
libraries header files. But it's been some time now that we isntall
the companion libraries in their own dedicated place, so we do not
need to remove that directory.

Until we have a better fix, just keep that directory for now.

Reported-by: Bob Rossi <bob@brasko.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config/toolchain: hide sysroot name when in backend mode

In backend mode, setting the sysroot name is the
responsibility of the upper-layer build system.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add latest version

Propagate the gcc-4.4.5 patchset to the newly added gcc-4.4.6.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: update config.sub

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/mk-patch: squash all non alphanumeric chars

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.10: update version to 1.10.1+hg

Tagging release 1.10.1

1.10: update version to 1.10.1

functions: fix date calculations

In case date(1) does not support nanosecond resolution, it does
not interpret '%N', and leave it as-is. So we have to remove it.

Note that some versions replaces '%N' with 'N', so we have to
take this into account as well.

Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from bb6e2df2427f3db871721c96ca3226cfa24204bc)

functions: avoid CR when progress bar is not enabled

Using CT-NG with progress bar disabled, still prints CR ('\r') characters
on the output. When you capture the output to a file as part of an
automated build, it shows extra empty lines.

For example:

------------------------------------------------------------
[INFO ] Performing some trivial sanity checks

[INFO ] Build started 20110404.113619

[INFO ] Building environment variables

[EXTRA] Preparing working directories

[EXTRA] Installing user-supplied crosstool-NG configuration
------------------------------------------------------------

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
(transplanted from cbd07f3dd6e3689a6b971e999aa82d09fb94d515)

binutils/binutils: hide gold option if no support for current architecture

The gold linker does currently support only a limited set of architectures:
- x86 (32- and 64-bit)
- ARM

Hide the gold option for other architectures.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 148e80538623dd4fdb7895546138eabaf5712518)

cc/gcc: fix building core when building statically

There was a mishap when cut-n-pasting code from the final
step into the core step: a variable was not renamed.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 811cf89e81618fb6994c016dd3467072411da2d5)

scripts/internals: fix stripping once more

Some scripts have 'very long lines', so the output of 'file'
will have that mentioned, such as:
POSIX shell script, ASCII text executable, with very long lines

Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 21025504dbc91d53eced23e337a547d5c1b94686)

scripts: fix stripping in finalisation step

The heuristic to find shell script is deficient. Fix it.

Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from ade5d48d98f27ba75e28c2f559f1eec9e76e9c59)

libc/glibc: LinuxThreads are no longer supported in latest versions

In fact, it is only supported in a few legacy versions.

Keep LT available for all eglibc versions, although it might need
a similar safeguard...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 0c0734c5d62ca4e09f5d54be4fe7f5c97bfc7539)

cc/gcc: do not build plugins for static toolchains

Plugins are shared objects, and when building a toolchain statically,
the gcc build system breaks havok (although there is no hard technical
reasons it should not be possible)...

And consequently, do not enable plugin supoprt in binutils.

Reported-by: Thomas Spurden <thomas@ado.is-a-geek.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 9139319423fd7d71017dfc974d3a06ab79e08fb8)

internals: don't remove lib64 symlinks in sysroot

The lib64 symlinks are needed for the linker to find the libraries.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from b49767e8651b2252bc651f2c2e16d6e6860689f4)

scripts: create the makeinfo wrapper before we set PATH

If we set PATH to the tools wrappers before we create the
makeinfo wrapper, then we may well wrap an existing wrapper
from a previous run.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 2ed26c6465689c024044f79c19ba302f749d0100)

internals: fix stripping host binaries

The gcc used by linaro has a version number specific to Linaro, but
identifies itself with its upstream version numbering scheme.

This breaks the strip in the finish step, because the actual gcc version
is not the same as the configured one (eg. 4.5.2 vs. linaro-4.5-2011.02-0).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from a3818c3b03e053adb8f6b7e6cf326f16a7f0c4aa)

functions: pretty print error messages

Reformat the error messages:
- strip ${CT_LIB_DIR} from scripts path names
- strip ${CT_TOP_DIR} from build.log path and docs path
- overall shorter lines
- point to the known-issues file

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: add a status for know issues

As time passes, a known issues can be no longer applicable (because
the component has been fixed, or a workaround ahs been added in the
crosstool-NG scripts/config...).

Some may also be unconfirmed, with no way to easily trigger the error,
or applies to old versions of components...

Add a status for every known issues.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: use the error message in the known issues titles

This helps users find the appropriate known issue entry.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: add known issues summary in the ToC

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: add known issue about missing forced unwind support

This has been reported many times, and has become a FAQ.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

functions: fix date calculations

In case date(1) does not support nanosecond resolution, it does
not interpret '%N', and leave it as-is. So we have to remove it.

Note that some versions replaces '%N' with 'N', so we have to
take this into account as well.

Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

functions: avoid CR when progress bar is not enabled

Using CT-NG with progress bar disabled, still prints CR ('\r') characters
on the output. When you capture the output to a file as part of an
automated build, it shows extra empty lines.

For example:

------------------------------------------------------------
[INFO ] Performing some trivial sanity checks

[INFO ] Build started 20110404.113619

[INFO ] Building environment variables

[EXTRA] Preparing working directories

[EXTRA] Installing user-supplied crosstool-NG configuration
------------------------------------------------------------

Signed-off-by: Javier Viguera <javier.viguera@digi.com>

complibs: disable building shared libs

Managing the shared version of the companion libraries
has become cumbersome.

Also, it will one day be possible to use the companion
libraries from the host distribution, and then we will
be able to easily use either shared or static libs.

As a side note, while working on the canadian-rework
series, it has become quite more complex to properly
handle shared companion libraries, as they need to be
built both for the build and gost systems. That's not
easy to handle. At all.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: remove duplicate patch

Remove a now obsolete patch for glibc-2.9 (a better one has
just been contributed by Esben).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: workaround for autoconf'ed define of caddr_t

When building canadian cross compiler, I have some trouble with
configure defining caddr_t as a macro, like:
#define caddr_t char *

When combined with the types.h where caddr_t is protected together
with daddr_t, the typedef of caddr_t breaks.

This patch works around it by protecting the caddr_t typedef
specifically.

I am uncertain as to the real cause and solution to this :-(

Signed-off-by: Esben Haabendal <eha@dev.doredevelopment.dk>

libc/glibc: fix cross-compiling to i686

In OE-lite we use the attached patch for building i686 cross compilers.
Thanks to Khem Raj for original patch :-)

At the same time, remove the corresponding patch that was in
the ports patchset.

CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Esben Haabendal <eha@dev.doredevelopment.dk>
[yann.morin.1998@anciens.enib.fr: remove patch from ports]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc-common: force use of the BFD linker

gold can not build glibc/eglibc, force use of the BFD
linker during the toolchain build.

Reported-by: Bill Pringlemeir <bpringle@sympatico.ca>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add blind option to force use of ld.bfd during build

gold is not capable of building glibc/eglibc, so we have to
force using the BFD linker, ld.bfd.

Offer a blind option that affected components can select to
force use of the BFD linker during the build.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: also install the wrapper for the internall ld

ld is also installed in PREFIX/TUPLE/bin, so we need to wrap that
as well.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: warn if only gold is selected

gold is not capable of building glibc/eglibc. See this thread:
http://sourceware.org/ml/crossgcc/2011-04/msg00010.html

Reported-by: Bill Pringlemeir <bpringle@sympatico.ca>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: always set name of the default linker

Always export the name of the default linker, even if only
one of them is selected.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: hide gold option if no support for current architecture

The gold linker does currently support only a limited set of architectures:
- x86 (32- and 64-bit)
- ARM

Hide the gold option for other architectures.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

arch/sparc: add absic support

Add support for building SPARC targeted toolchain.
With this patch I have built a working sparc V8 (32 toolchain).

Testing shows that not all gcc versions works well:
4.4.1 OK (kernel builds and the final kernel can boot)
4.4.2 Not tested
4.4.3 Not tested
4.4.4 BAD (Kernel can build but fails during boot)
4.4.5 BAD (Kernel can build but fails during boot)
4.5.1 BAD (Build fails with a spill related ICE - http://gcc.gnu.org/bugzilla/show_bug.cgi?id=35664)
4.5.2 OK (kernel builds and boots)

I have successfully been using the 4.5.2 version for a few months.

This patch does not add support for the LEON variant.
That may come later.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[yann.morin.1998@anciens.enib.fr: for 32-bit, default CT_TARGET_ARCH is OK]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: update to latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: add first sample to build with gcc-4.6.0

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix linking with static PPL 0.11+

PPL 0.11+ installs three libs: lippl, libppl_c and libpwl.
libppl_c has a dependency on libpwl (at least for watchdog stuff).

While gcc correctly links with libppl and libppl_c, it does not
pull libpwl in. In case of shared libs, this is not a problem, as
libppl_c has a NEEDED dependency on libpwl. But for static libs,
that does not work. Although libppl_c.la exists and has a correct
dependency on lipwl, somehow gcc misses it. So we have to force
pulling libpwl when needed.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: hide Linaro options by default

It can be quite confusing for a new-comer to find strange
version numbers for gcc, so hide the Linaro versions by
default.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add linaro 4.6 pre-release

Before gcc 4.6 was released, Linaro has a pre-release available.
Include that version in the config list.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add 4.6.0

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/ppl: build watchdog library

gcc-4.6+ requires the Parma Watchdog Library (libpwl).
Build it and use it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: prepare for upcoming 4.6

gcc 4.6 will no longer depend on libelf.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: cleanup the _or_later logic

So far, we've had a version always select appropriate _or_later option,
which in turn would select all previous _or_later options.

Because the dependencies on companion libs were cumulative, that was
working OK. But the upcoming 4.6 will no longer depend on libelf, so
we can't keep the cumulative scheme we've been using so far.

Have each release family select the corresponding dependencies, instead
of relying on selecting previous _or_later.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: update linaro versions

Linaro has released version linaro-4.5-2011.03-0.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix building core when building statically

There was a mishap when cut-n-pasting code from the final
step into the core step: a variable was not renamed.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: update version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add altest version

Fix an incorrect version at the same time... :-(

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/internals: fix stripping once more

Some scripts have 'very long lines', so the output of 'file'
will have that mentioned, such as:
POSIX shell script, ASCII text executable, with very long lines

Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/mingw: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc-common: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/newlib: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/libelf: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/mpc: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/cloog: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/ppl: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/mpfr: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/gmp: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/trace: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/dmalloc: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/elf2flt: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: log even more

Also log variable assignement for single commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: allow logging of commands with variables

In a lot of places, we need to call some commands with specific
variable settings, a-la:
var1=val1 var2=val2 /foo/bar/buz opt1 opt2

Unfortunately, we currently can not log the variable settings.

Enhance CT_DoExecLog with a crude heuristic that works pretty well
and that can also log setting variables.

Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: leave changelog in build dir, copy to install dir

Users tend to look for the build log in the current working directory,
rather than in the toolchain's installation dir. While bundling the build
log in the toolchain installation dir is nice for distribution and review,
it can be easier to have the build log readily available in the working
directory, as it is quicker to get to it.

So, the build log stays in the working directory until the toolchain is
completely and successfully built, and then a (compressed) copy is made.

Reported-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/ppl: add latest version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add newer versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: fix stripping in finalisation step

The heuristic to find shell script is deficient. Fix it.

Reported-by: Kyle Grieb <grieb.kyle@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: new PPC e300c3 sample

Gustavo wrote:

---8<---
Attached my ct-ng e300c3 toolchain config for:

powerpc-e300c3-linux-gnu [l X]
OS : linux-2.6.36.3
Companion libs : gmp-5.0.1 mpfr-3.0.0 ppl-0.10.2 cloog-ppl-0.15.10 mpc-0.8.2 libelf-0.8.13
binutils : binutils-2.21
C compiler : gcc-4.5.2 (C,C++)
C library : eglibc-2_12
Tools :
---8<---

Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
["Yann E. MORIN" : updated to match new config options]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: update config.{guess,sub}

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: use log level CFG for ./configure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/libelf: use log level CFG for ./configure

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: do not chmod u+w the whole source directory

Doing a chmod on the whole source dir after every packages
are extracted can take a hell of a lot of time.

The offending packages are far from legion, and they now
have their own chmod u+w to cleanup their own mess...

Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

comptools/libtool: chmod files to u+w

The libtool-2.2.6b tarball contains RO files.
We have to chmod them u+w.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

comptools/autoconf: chmod files to u+w

The autoconf-2.65 tarball contains RO files.
We have to chmod them u+w.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

comptools/make: chmod files to u+w

The make-3.81 tarball contains RO files.
We have to chmod them u+w.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

comptools/automake: chmod files to u+w

The automake-1.11.1 tarball contains RO files.
We have to chmod them u+w.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: chmod ncurses files to u+w

The ncurses-5.7 tarball contains only RO files.
We have to chmod them u+w.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest 2.6.37.2 version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/sstrip: build statically for static toolchains

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/elf2flt: remove trailing spaces

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: rename chapter 9

Rename the file so that it is the same name as the chapter.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: add chapter 9 to ToC

Missed in the previous commit... :-/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: add an in-depth explanations of the build steps

The build process is quite complex: gcc is built three times, there are
two C library steps, there are those companion libraries...

People often wonder what all these steps do, and why they are needed.

Recently, someone proposed a tutorial on the crossgcc mailing list:
http://sourceware.org/ml/crossgcc/2011-01/msg00059.html

This meant that there was a need for such a tutorial, and explanations
on how a toolchain is built. So i decide to extend my answers:
http://sourceware.org/ml/crossgcc/2011-01/msg00060.html
http://sourceware.org/ml/crossgcc/2011-01/msg00125.html

into proper documentation in crosstool-NG.

Thanks go to Francesco for suggesting this. He has a fine tutorial
for beginners there:
http://fturco.org/wiki/doku.php?id=debian:cross-compiler

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/mpc: add latest version 0.9

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/ppl: add latest version 0.11.1

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: fix typo in version string

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: do not build plugins for static toolchains

Plugins are shared objects, and when building a toolchain statically,
the gcc build system breaks havok (although there is no hard technical
reasons it should not be possible)...

And consequently, do not enable plugin supoprt in binutils.

Reported-by: Thomas Spurden <thomas@ado.is-a-geek.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: LinuxThreads are no longer supported in latest versions

In fact, it is only supported in a few legacy versions.

Keep LT available for all eglibc versions, although it might need
a similar safeguard...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: fix dubious construct when installing headers

This is dubious because if the copy fails, then we'll miss the error.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: only install start files for NPTL

Building the start files requires a shared-capable compiler, which we do
not have when the threading implementation is LinuxThreads.

So, only build the start files when the threading implementations is NPTL.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: add fortify option

By default, recent versions of glibc and eglibc will build some
functions that take format strings (eg. printf, syslog...) with
run-time checks against some format string attacks. This is
called a fortified build.

Unfortunately, this fails somehow while building the instrumented
version of syslog, with some kind of circular dependency...

Disable fortified builds by default, and hide the enabling option
behind EXPERIMENTAL for daring users...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

internals: don't remove lib64 symlinks in sysroot

The lib64 symlinks are needed for the linker to find the libraries.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

... and remove old versions.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

comptools: install them side-to-side with build tools

As companion tools might or might not be used to build each
toolchain, they do belong to that toolchain's build tools,
not to the generic override tools.

Fix a typo in the autoconf URL.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

buildtools: the buildtools dir is in fact a prefix

Consider the buildtools install directory as a prefix directory,
that is, install buildtools in prefix/bin/, not in prefix/.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

buildtools: move to working directory

There is absolutely *no* reason for the buildtools (wrappers to gcc, g++,
as, ld... for the local machine) to be in the toolchain directory. Moreover,
they are removed after the build completes.

Move them out of the toolchain directory, and into the build directory (but
yet the part specific to the current toolchain). This means we no longer
need to explicitly remove them either, BTW, but we need to save/restore them
for the restart feature.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

buildtools: store path to buildtools in a variable

Currently, the buildtools are installed relative to ${CT_PREFIX_DIR}.
Change that by introducing ${CT_BUILDTOOLS_DIR}, which is
still set relative to ${CT_PREFIX_DIR}, but which will make it easy
to change in the future.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: create the makeinfo wrapper before we set PATH

If we set PATH to the tools wrappers before we create the
makeinfo wrapper, then we may well wrap an existing wrapper
from a previous run.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel: move the headers install step

The kernel headers are only needed just before we build
the C library headers, and need not be present before.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: add versions from Linaro

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add versions from Linaro

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

internals: fix stripping host binaries

The gcc used by linaro has a version number specific to Linaro, but
identifies itself with its upstream version numbering scheme.

This breaks the strip in the finish step, because the actual gcc version
is not the same as the configured one (eg. 4.5.2 vs. linaro-4.5-2011.02-0).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: Make eglibc 2.11 and 2.12 not experimental

I haven't noticed the usual experimental testers complain about eglibc
2.11 or 2.12 being unstable. So stop marking them as experimental.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

libc/eglibc: Add 2.13 branch

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

1.10: update version to 1.10.0+hg

Tagging release 1.10.0

1.10: create maintenance branch, update version to 1.10.0

1.9: close branch

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.9: update version to 1.9.3+hg

Tagging release 1.9.3

1.9: update version to 1.9.3

libc/mingw: do not remove support symlink

Under mingw, it seems that there is a mix between the traditional /usr
directory, and a similar-purposed /mingw directory (both in the sysroot).

Currently, we create /mingw as a symlink to /usr, and we removed it in
the libc-finish step.

Unfortunately, this prevents the pre-processor to find the headers.
Keeping the symlink makes it magically work...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from fa5c70b11fecf390c78780fe8f8ba0a836a59e92)

samples: update the samples

Release time is coming at a fast pace. It is now time to
update the samples so they apply cleanly.

The canadian-cross sample mingw32,i686-none-linux-gnu has
been replaced with i586-mingw32msvc,i686-none-linux-gnu.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: add option to force unwind

We make it an option, as not all combinations of architectures
vs. compiler vs. glibc/eglibc exhibit the issue. Mostly visible
on old glibc versions, it seems...

This is a missing part from the glibc/eglibc merger... :-/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: update tools

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: enable plugins if needed

Enabling plugins in binutils is not enough, and gcc also
needs to be ./configured with --enable-plugins, although
this is not documented anywhere... :-/

Reported-by: karthik duraisami <kdconstant@hotmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: squash the multi-slash in the sysroot symlink

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

comptools: add make-3.81

Since the advent of make-3.82, some packages now break due to changes
in make-3.82, being stricter than 3.81 when interpreting the Makefiles.

This has bugged us a bit too much so far, and I believe fixing all
of them is a long road, while simply building make-3.81 is the easiest
route for now.

Of course, in the long term, packages will get fixed upstream, and we
should back-port the fixes to old versions, and get rid of building
make-3.81. In the meantime...

Reported several times on the mailing list.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: add an option not to remove the destination directory

In certain circumstances, removing the destination/installation directory
is a bad idea. For example, when the build environment is already taking
care of sanitising the build tree, and pre-installs stuff in there, it is
a very bad idea to remove the destination directory.

This happens now in buildroot, as the crostool-NG backend now installs the
toolchain in the common host-tools directory, and pre-install there a few
host-utilities (eg. host-automake and host-gawk).

Provide a config knob to turn on/off the removal of the destination
directory, defaulting to 'y' (previous behavior), and forced to 'n' when
used as a backend.

Reported-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: update the mingw sample

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/mingw: do not remove support symlink

Under mingw, it seems that there is a mix between the traditional /usr
directory, and a similar-purposed /mingw directory (both in the sysroot).

Currently, we create /mingw as a symlink to /usr, and we removed it in
the libc-finish step.

Unfortunately, this prevents the pre-processor to find the headers.
Keeping the symlink makes it magically work...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config/toolchain: force use of sysroot if OBSOLETE is not set

Use of the sysroot is highly recommended, and the non-sysroot case is
both obsolete and not widely tested.

Before the non-sysroot case can go away, deprecate it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: fix double slash in paths

Computed paths may contain double slashes.
This is not an issue but it is just ugly to look at.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: add an option to name the sysroot directory

Depending on local policies, some users have expressed a need to
have the sysroot be named differently than the hard-coded name.

Add an option for that.
Default to 'sysroot' to match the existing literature.

While at it, replace 'sys-root' with 'sysroot' everywhere we
reference the sysroot.

Reported-by: Alexey Kuznetsov <Alexey.KUZNETSOV@youtransactor.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc: remove now unneeded do_libc_headers

do_libc_headers is now a noop, and is no longer used, so remove that step.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc-eglibc: misc janitorial cleanups.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: add glibc specifics to the shared code, and use it

Final step at sharing code between glibc and eglibc.
Fall, wall of shame, fall!... :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: PARALLELMFLAGS is evil, rename

The reunification of the glibc/eglibc code paths exposed a nasty
bug in the glibc build: use of PARALLELMFLAGS breaks the build.

See the explanations in that bug report against FC6:
https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=212111

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: commonalise assembling the list of addons

glibc and eglibc each have two very similar ways of building this list.
This can, and should definitetly, be shared.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: commonalise setting of the minimum supported kernel version

It will be possible to use that also with eglibc, so this hunk belongs to
the common code.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: use the common start_files procedure

Use the common procedure, shared between glibc and eglibc. This requires
that glibc-specific bits be included in the shared procedure.

But still build the full libc with the glibc-specific procedure. This will
be commonalised in a future commit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: cleanup common code for sharing with glibc

Some stuff is eglibc-specific, so needs to be conditonal.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: move generic code to a common file

The build procedure for eglibc is generic enough to
be shared between glibc and eglibc. This includes:
- headers install (empty!)
- start files build
- complete libc build
- libc finish (empty!)
- add-ons list

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/mingw: move content of do_libc_headers into do_libc_start_files

It is unnecessary to split C library preparation into two steps, as only
one really makes sense. So, do_libc_headers is bound to be withdrawn
short-term, in favor of do_libc_start_files.

mingw already had all its start files installation in do_libc_headers, and
do_libc_start_files was empty, just migrate the content of the former into
the latter.


Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/uClibc: move content of do_libc_headers into do_libc_start_files

It is unnecessary to split C library preparation into two steps, as only
one really makes sense. So, do_libc_headers is bound to be withdrawn
short-term, in favor of do_libc_start_files.

uClibc already had all its start files installation in do_libc_headers, and
do_libc_start_files was empty, just migrate the content of the former into
the latter.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc-glibc: remove 2.3.6

This is an obsolete version which is no longer used by any sample (the only
user, the ia64 sample, has been removed).

It also makes the code path a bit complex, with twists just to accomodate
that version. Removing the version will make those twists go away, and
will ease commonalisation of glibc and eglibc in the future (hopefully!).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

arch: remove ia64

ia64 is broken in every gcc/glibc combinations I tested (except for the
existing sample that used very old versions).

Nobody complained on the list about not being able to build recent versions.

So the only way forward I can see is to remove the architecture altogether.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: simplify the download URL

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: longterm kernel location changed

The location of the longterm Linux kernels on FTP has changed.
Here is a simple (but not very versatile) fix.

Signed-off-by: "Björn A. Herwig" <herwig@gdsys.de>
[yann.morin.1998@anciens.enib.fr: make it generic/versatile]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/cloog: regenerate autostuff files

Latest version of CLooG does not have properly generated autoconf files,
so they need to be regenerated before the call to ./configure

Signed-off-by: "Ilya A. Volynets-Evenbakh" <ilya@total-knowlege.com>
[yann.morin.1998@anciens.enib.fr: make it conditional on 0.15.10 only]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 32c7bbfa3f6514a0fbd5a7388d33e664ba62ed89)

complibs/cloog: regenerate autostuff files

Latest version of CLooG does not have properly generated autoconf files,
so they need to be regenerated before the call to ./configure

Signed-off-by: "Ilya A. Volynets-Evenbakh" <ilya@total-knowlege.com>
[yann.morin.1998@anciens.enib.fr: make it conditional on 0.15.10 only]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.9: update version to 1.9.2+hg

Tagging release 1.9.2

1.9: update version to 1.9.2

debug/ltrace: fix building for mips

ltrace 0.5.3 currently fails to build for target mips because MY_TARGET
(introduced by patches/ltrace/0.5.3/150-allow-configurable-arch.patch)
is set to 'mips' via CT_ARCH, while the mips specific stuff in ltrace
(0.5.3) is stored under sysdeps/linux-gnu/mipsel:

result: *** No rule to make target `mips/arch.h', needed by `sysdep.h'.
Stop.

The following patch fixes this issue

Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: reformat commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 2115901c7f07181d92ddbd7dd7ebeaa72e4fb176)

cc/gcc: fix building of ecjx

When building ecjx, the compiler for the build system must
be used, not for the compiler for the host system.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from fc967527069089dc376840cd1e51cd26eb56fc32)

complibs/libelf: build with -fPIC

libelf is used by gcc to build the lto-plugin used
by binutils' gold to perform LTO.

This requires that files in libelf be compiled with
-fPIC to generate a proper .so.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from c48aba92cbeb7b7dce956a63ec65d3296735cc16)

debug/gdb: fix for psim build failure due to -lz in gdb-7.2.

Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: fix space-damage]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 78286fe70b62cee395bc603a5e44ef136c4531e3)

internals: properly remove all docs

Part of the installed doc was not removed (if configured to).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from cb0f625b3f9f704140aaeed024baac05e6b27df0)

debug/ltrace: fix building for mips

ltrace 0.5.3 currently fails to build for target mips because MY_TARGET
(introduced by patches/ltrace/0.5.3/150-allow-configurable-arch.patch)
is set to 'mips' via CT_ARCH, while the mips specific stuff in ltrace
(0.5.3) is stored under sysdeps/linux-gnu/mipsel:

result: *** No rule to make target `mips/arch.h', needed by `sysdep.h'.
Stop.

The following patch fixes this issue

Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: reformat commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: update i686-nptl-linux-gnu

Enable Java and Fortran frontends.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix building of ecjx

When building ecjx, the compiler for the build system must
be used, not for the compiler for the host system.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: update i686-nptl-linux-gnu

Notable changes:
- uses binutils 2.21, builds gold, but defaults to ld
- uses gcc 4.5.2, with GRAPHITE and LTO, builds lto-plugin

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: build lto-plugin if binutils' gold is built

To properly enable LTO with gold, gcc has to install a plugin that gold
uses to handle the LTO information.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add wrapper to gold and ld

When both gold and ld are installed, add a wrapper that calls
to either gold or ld.

In case the wrapper is installed, we also need to symlink ld.bfd
and ld.gold for the core_cc steps.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add support for threaded gold

When configured with support for threads, gold can link in
parallel, possibly cooperating with a make jobserver.

Add an option enabling threads.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add support for plugins

Add an option to enable plugins support in binutils.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add option to enable gold

gold is a new, optimised, multi-threaded linker with support
for plugins.

Add support for gold starting with binutils 2.21. Although 2.20
also had gold, the configure flags have changed, and supporting
2.20 would be a mess in the code.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: add BINUTILS_2_21_or_later blind option

Add BINUTILS_2_21_or_later blind option. It will be used to add
conditional support for building 'gold' on versions that have it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/libelf: build with -fPIC

libelf is used by gcc to build the lto-plugin used
by binutils' gold to perform LTO.

This requires that files in libelf be compiled with
-fPIC to generate a proper .so.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: fix for psim build failure due to -lz in gdb-7.2.

Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: fix space-damage]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: update after libc versions renaming

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: normalize eglibc hidden version names

In the previous patches to glibc and uclibc, we standardized on hidden
version names:

LIBC_<LIBC NAME>_V_<VERSION>

This patch updates EGLIBC to be the same for consistency to:

LIBC_EGLIBC_V_<VERSION>

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

libc/uClibc: normalize uclibc hidden version names

Hidden version names for uClibc conflicted:

LIBC_UCLIBC_V_0_9_30_2
LIBC_V_0_9_30_1

name them constantly as:
LIBC_UCLIBC_V_<version>

Also update the build script where we use snapshots by version or snapshots by date.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

libc/glibc: normalize glibc hidden version names

Hidden version names for glibc conflicted:

LIBC_GLIBC_V_2.10.1
LIBC_V_2.10

name them constantly as:
LIBC_GLIBC_V_<version>

Reported-by: Esben Haabendal <eha@doredevelopment.dk>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

internals: properly remove all docs

Part of the installed doc was not removed (if configured to).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: add 2.12.1 and 2.12.2

Signed-off-by: Heiko Zuerker <heiko@zuerker.org>

libc/eglibc: remove obsolete patch

That patch has been applied upstream as r8690.

Signed-off-by: Chih-Min Chao <cmchao@gmail.com>

cc/gcc: Add gcc 4.5.2

Add gcc 4.5.2.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

libc/eglibc: fix installed scripts

Like rev 2002, eglibc installs some bash scripts, but use the path to the
buildtool bash as the interpreter (on the shebang line). This is only a
symlink to the real bash, and thus is not available at runtime.

Fix that by assuming that shell on the target *will* be /bin/bash.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
(transplanted from 6884dcb80121ebc8ce17deee62716ed75fc29393)

config: fix the patch fallbacks methods

Reported-by: Heiko Zuerker <heiko@zuerker.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from e48654bf7e49d2ee40fec5fbbdaf00440329ee5f)

patches/eglibc: remove 100-powerpc-private_futex.patch from trunk

100-powerpc-private_futex.patch no longer applies to eglibc trunk.
This patch was submitted upstream in trunk.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

libc/eglibc: fix installed scripts

Like rev 2002, eglibc installs some bash scripts, but use the path to the
buildtool bash as the interpreter (on the shebang line). This is only a
symlink to the real bash, and thus is not available at runtime.

Fix that by assuming that shell on the target *will* be /bin/bash.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>

kernel/linux: Cleanup unneeded files from 'headers_check' and 'headers_install'

headers_install makes .install and ..install.cmd files.
headers_check makes .check and ..check.cmd files.
Remove these files uncoditionaly after installing (and checking) header files
into the sys-root.

Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[Yann E. MORIN: reformat the patch, move hunk out of headers_check conditional]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: overview.txt is gone, point to the new documentation

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config/binutils: Add binutils 2.21

Currently depends on EXPERIMENTAL, as it is not well tested and I'm
not sure if/which patches need to be ported forward from 2.20.1.

config: fix the patch fallbacks methods

Reported-by: Heiko Zuerker <heiko@zuerker.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: add doc for patch-rework

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: update config.{sub,guess}

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: fix help for 2.6.35.10

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: bump to latest versions

- add 2.6.36.2.
- bump to 2.6.35.10, which is a new longterm.
- bump to 2.6.32.27 and 2.6.27.57, the two old longterms.
- update longterm descriptions.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.9: update version to 1.9.1+hg

Tagging release 1.9.1

1.9: update version to 1.9.1

complibs/libelf: use host compiler

It appears, that the configure scripts of libelf versions 0.8.13 and
0.8.12 do not honour the --host option. The compiler must be given as an
environment variable or the process will use the command "gcc" as the
compiler.

It seems that this is already done in the function do_libelf_target in
scripts/build/companion_libs/libelf.sh, but not in function do_libelf.
(transplanted from 81b4c0efa46f757b89c150f66e09615ee7c0f5a4)

complibs/libelf: use host compiler

It appears, that the configure scripts of libelf versions 0.8.13 and
0.8.12 do not honour the --host option. The compiler must be given as an
environment variable or the process will use the command "gcc" as the
compiler.

It seems that this is already done in the function do_libelf_target in
scripts/build/companion_libs/libelf.sh, but not in function do_libelf.

libc: hide no-thread for those C libraries that do not support it

Building non-threaded glibc has been unsupported for a long time, now:
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html

As eglibc is a spin-off of glibc: ditto.

So do not offer that possibility in the menuconfig.
Thanks to Thomas Petazzoni for spotting, and helping to solve, the issue!

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

internals: fix stripping

Do not try to strip any script.

Previously, only shell scripts were ignored, but when the Java frontend
is installed, it also installs a Python script. So we have to ignore
any "script text executable", and not restrict it to "shell script text
executable".

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/internals: strip all executables

Using a list of files to strip misses a few of them.
Now, scan appropriate directories, and strip all ELF
executables and shared objects.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: build bare-metal gcc statically

- add a new parameter to do_cc_core: build_statically=[yes|no]
- pass build_statically=yes in core_pass_2 when doing bare_metal
- fix handling the static / static libstdc++ / static complibs stuff
- add a commment to keep both blocks (in core and final) in sync

Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: build final gcc statically

If the global static option is set, then build the final gcc statically.

Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

binutils/binutils: build statically

If the global static option is set, then build binutils statically.

Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: global static forces static cross-gdb

If the global static option is set, then build host binutils statically.

Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs: do not prompt for shared libs if static selected

If the global static toolchain option is selected, then do not
prompt the user whether to build shared companion libraries.

Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: add option to build statically linked toolchain

Add a config option to statically build the host tools.
Impacted tools can use that option to decide wether to build
statically or shared.

For now, no tool uses it, but they'll be added one at a time
in the next commits.

Signed-off-by: "Bryan Hundven" <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/cloog: fix linking with libstdc++

This rules out 0.15.5 and previous versions, that did not
have this option, so remove them from the list. Anyway,
they were marked 'OBSOLETE', so it's not a big loss...

[Yann E. MORIN: remove obsolete versions]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: recover on partially downloaded files

Download to an intermediate temp file, and rename it to its final
name only of download succeeds.

This catches both a failed download, and also the case where the user
interrupts the download. Thus, the a partial download gets discarded,
and we no longer try to extract a partial tarball, which we would
previously have done.

Suggested by Thomas PETAZZONI.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: call curl and wget in sequence

It can happen, in some circumpstances, than one can succeed where
the other would fail. Those cases involves convoluted enterprise
networks with proxies playing tricks.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: remove aria2c as downloader, retain only curl and wget

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix pr42289: incorrect alignment on OABI

Fix building libffi on OABI.
Although it has been marked as 4.3-only, it is stil not fixed,
and also applies to 4.4.x

See:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=42289

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: 4.4.5, add arm-softfloat-libgcc patch from buildroot

Reported-by: M P <buserror@gmail.com>
[Yann E. MORIN: add the patch to other 4.4.x]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/CLooG: only install the libraries

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: better find sysroot with old gcc

Only starting with 4.4 does gcc have a -print-sysroot option.
For 4.3 or before, we have to play some tricks:
- ask gcc where libc.so is,
(we expect it in ${sysroot}/usr/lib/libc.so)
- trim /usr/lib/libc.so from the result

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from aa2305c5b2a57fbcda9a1b5bb5fb3a476ac49a13)

scripts/xldd: stop at first match

Break the library search loop as soon as a match is found.
Previously, if a library was present in different places,
then the last occurence would be returned, when the first
one would have been used at runtime.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 78d2f99d403f7092203fc7a119ec19f9a2108afa)

scripts/xldd: fix version string

The version string was hard-coded.
Now, the version string follows the crosstool-NG version.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from e826624966a1672422711f779d98686e03a30b90)

scripts/xldd: fix typoes

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from dbecd99ecba51980ec9938b1313effeb45ef2ce7)

scripts/xldd: install only when shared libs enabled

When the toolchain has no support for shared libraries, there is no
point in installing the cross-ldd helper.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 032ae3253a655d859f25a5c2bac1b72051f950b0)

scripts/xldd: try to handle RPATH tags

The RPATH tags allow a binary to tell the dynamic linker what
directories to search for libraries. The so-added paths are
searched into before any other paths.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: better handle the origin of the library

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: avoid reporting duplicates

Once a NEEDED dependency has been solved, do not report it
if other dependencies depend on it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

script/xldd: add debug traces

Add debug traces to help understand how xldd finds the
libraries, what directories it scans, in which order...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: parse /etc/ld.so.conf

Scan /etc/ld.so.conf for paths to search for libraries.
Also follow include directives in there.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: better find sysroot with old gcc

Only starting with 4.4 does gcc have a -print-sysroot option.
For 4.3 or before, we have to play some tricks:
- ask gcc where libc.so is,
(we expect it in ${sysroot}/usr/lib/libc.so)
- trim /usr/lib/libc.so from the result

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: report appropriate load address for 32- or 64-bit

For 32-bit target systems, report 4-byte (8-xdigit) wide adresses,
and for 64-bit, report 8-byte (16-xdigit) wide adresses.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: stop at first match

Break the library search loop as soon as a match is found.
Previously, if a library was present in different places,
then the last occurence would be returned, when the first
one would have been used at runtime.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: fix space-damage

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: fix version string

The version string was hard-coded.
Now, the version string follows the crosstool-NG version.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: fix typoes

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/xldd: install only when shared libs enabled

When the toolchain has no support for shared libraries, there is no
point in installing the cross-ldd helper.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/*glibc: enable selection of the oldest supported ABI

[Yann E. MORIN: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/*glibc: add option to disable symbols versioning

[Yann E. MORIN: split the original patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: fix downloading

Since Subversion 1.6.13 was released, it is no longer possible
to checkout/export to the current working directory using '.'
(eg. "svn co bla://blabla/foo/bar ." no longer extracts the content
of bar into ./ but into ./bar).

Fix this by luring Subversion to extract into "$(pwd)", which has
the advantage of working both with all known versions so far.

At the same time, remove the useless redirection.
(transplanted from 42cc9bd0db7ea6d690efab40742881414f7c1277)

libc/eglibc: fix downloading

Since Subversion 1.6.13 was released, it is no longer possible
to checkout/export to the current working directory using '.'
(eg. "svn co bla://blabla/foo/bar ." no longer extracts the content
of bar into ./ but into ./bar).

Fix this by luring Subversion to extract into "$(pwd)", which has
the advantage of working both with all known versions so far.

At the same time, remove the useless redirection.

1.9: update version to 1.9.0+hg

Tagging release 1.9.0

1.9: create maintenance branch, update version to 1.9.0

1.8: close branch

samples: update all samples to latest config knobs

No new feature, no newer version, only updates so that
samples can be recalled without anything to set.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

testsuite: fix gcc test-suite

DG_TARGET does not exist as a variable, it is expanded only once
at installation time.

Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: also overide LANG

On some systems, we also need to overide LANG as well as LC_ALL.

Reported-by: Geoffrey Lee <geoffl@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

contrib: fix gcc test suite on system without echo -e

Fix the use of quotes in contrib/gcc-test-suite/Makefile to solve the
problem where board.exp is incorrectly generated on some build systems
where 'echo -e' is not handled correctly.

Signed-off-by: Andy Gibbs <andyg1001@hotmail.co.uk>
[Yann E. MORIN: fix space damage, pretty-up the stuff]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: fix glibc-2.10.1 patchset

There was a missing '#" to a '#define' line.

debug/gdb: Update version to 7.2

Signed-off-by: Jon Ringle <jon@ringle.org>

libc/newlib: add option to compile support for IOs on C99 formats

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/newlib: add option to compile support for long long IOs

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/newlib: add option to compile support for float IOs

Adds support to enable/disable IOs of floating point values
(float, double, and long double).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

Merge.

scripts: do not provide to-sysroot include symlink

Do not provide the PREFIX/TUPLE/include -> SYSROOT/usr/include symlink,
and let gcc install its dependable C++ headers were it sees fit to
install them.

See the test by Anthony (by the end of the messages):
http://sourceware.org/ml/crossgcc/2010-10/msg00129.html
http://sourceware.org/ml/crossgcc/2010-10/msg00134.html

See also the comment by Arnaud:
http://sourceware.org/ml/crossgcc/2010-10/msg00157.html

Reported-by: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

Merge.

Revert #a09246191120: cc/gcc: fix C++ headers location

This was intended as a fix for g++ not finding its headers,
but it breaks in othe horrible ways. So just revert it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: update versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: nuke oldish versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add 2.6.36

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

complibs/cloog: add latest version 0.15.10

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/eglibc: add 2.11 and 2.12 branches.

Also fix typo s/LIBC_V_2_10/EGLIBC_V_2_10/

scripts: add STATE logging level for state save/restore output.

The save/restore state output is voluminous; using this flag allows us
to quickly see or ignore when something is just being saved.

[Yann E. MORIN: this is a blind log level, and is used only to search
in the build-log afterward.]

Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>

scripts: add "FILE" and "CFG" debug levels.

I ran into some minor difficulties looking through the build log for a
particular file: I wasn't interested in seeing it unpacked, but only
when it is built or installed. Adding these two levels allows me to
differentiate between those cases.

[Yann E. MORIN: Those are blind log levels, and are used only to search
in the build-log afterward.]

Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>

cc/gcc: fix 128-bit long doubles option

Spotted by Arnaud LACOMBE:
http://sourceware.org/ml/crossgcc/2010-10/msg00122.html

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: update to not use // download

Parallel download can cause issues in some network environments
(eg. behind some firewalls/routers), so default to not //.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix 4.4.4 patchset

Most patches contained two spurious first lines.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from ada9128c98b89569b54aefe9b7a4b0bd2bd20023)

cc/gcc: fix C++ headers location

In case we build the C++ compiler, we have to tell gcc where to put the C++
headers, or else it will try to # put it in prefix/tuple/include, which we
make a symlink to sysroot/usr/include during the build, and that we delete
(the symlink!) after the build, but gcc will not look in sysroot/usr/inlcude
for C++ headers by default.

Implements a fix suggested by: Bryan Hundven <bryanhundven@gmail.com>

Reported-by: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from a0924619112015bdaa81a0a2313d21ef38607bc2)

cc/gcc: add 4.4.5

Add 4.4.5, propagate patchset from 4.4.4.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fix 4.4.4 patchset

Most patches contained two spurious first lines.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: update/fix patch-rework

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: add an option to enable/disable build of libssp

libssp is the run-time Stack-Smashing Protection library.
It can be usefull to have or miss, depends...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>