kernel/linux: fix using custom tarball

The custom-tarball symlink was created in CT_SRC_DIR, when it
should be created in CT_TARBALLS_DIR.

Reported-by: Guylhem Aznar <crossgcc@guylhem.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: simplify and fix the toolchain config script

The script that is installed, and which sole purpose is to dump
the .config that was used to build the toolchain, is pure insanity.

Let's make it much, much more simpler...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/glibc: change default of "forced unwind" to 'y'

Virtually all our targets do support stack unwinding. For some of
them, ./configure can't detect that, and the build fails later on.

So, default to force unwind, and let the user disable it if it
breaks in his/her case.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: update GDB revisions

Update GDB with the latest available revisions.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

cc/gcc: update Linaro GCC revisions

Update Linaro GCC with the latest available revisions.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

kernel/linux: add latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: add xz support

Add support for the new XZ-compressed tarballs. At least glibc
uses that new format.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: test for decompressors before use

./configure does check for the presence of gz and bzip2, so we can
safely use them in the build scripts.

On the other hand, more recent formats (eg. XZ) are not yet widely
available, and we do not want, and can't, force the user to install
them as a pre-requisite.

So, build up a list of allowed tarball formats based on the available
decompressors. For no, this is a static list, but the upcoming XZ
support will conditionnaly add to this list.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: add test for xz-utils

Some upstream now release tarballs compressed with xz, along with the
more traditional bzip2 and/or gzip tarballs. xz (and its predecessor
lzma) achieves better compression, so is a good candidate to shorten
the time it takes to download the source tarballs.

Enable downloading xz-cmopressed tarballs if the user has xz-utils.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: do not require lzma

Nothing uses lzma now, so we can get rid of it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: commonalise tar options in CT_EXtract

This shortens command lines, so it's good! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: remove check for lzma tarballs

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: simplify custom tarball handling

Simplify the way the custom tarball is handled:
- fake version="custom"
- at download, simply link the custom tarball to:
"linux-custom.${custom_extension}"
- at extract, the above allows to simply extract "linux-${LINUX_VERSION}"
where LINUX_VERISON is set to the fake version="custom"

Not that much convoluted, in fact... :-/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: deprecate copying headers from pre-instaleld headers

No-one ever inquired about this feature. Due to the way it works, it is
rather unlikely that every user used a properly-formatted tarball, or a
properly structured directory as imput.

Beside, it is not really easy to maintain: I just spent one full day
remembering how it worked... Sigh... :-(

Just deprecate this, until next release, or until someone complains.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

samples: do not use the mirror by default

As the mirror is always tried first, and the default is my server,
it means every download will first hit my server. As I do not have
much mirrored there, it means a lot of time is lost.

Disable use of the mirror for all samples, except the one that does
need it for the uClibc snapshot.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/uClibc: force use of ctor/dtor

Although ctor/dtor do not seem strictly required, missing them proves
rather inconvenient, as ld can't link binaries.

Reported-by: John Spencer <maillist-uclibc@barfooze.de> (sh4rm4 on IRC)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: remove messages about failed downloads

When downloading via svn/cvs/... an attempt to retrieve from the
mirror is made. If the mirror does not have the required tarball,
an error message is printed. This is misleading, as the download
may later succeed via svn/cvs/...

Remove the messages about failed downloads altogether.

At the same time, use "if ... then ... fi" instead of "... && ..."

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: more autostuff compatibility

Ignore --program-prefix=...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from d28b764334b8f8f3acfecafea3b52a6cc2e8a272)

configure: more autostuff compatibility

Ignore --program-prefix=...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kerenl/linux: update to latest versions

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts: try the mirror even if downloads are forbidden

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: use array variables for URLs list

This is needed later, when we'll conditionnally use both the
upstream and the mirror URLs.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: always prefer the mirror

Currently, the mirror can be used either:
- as a fallback in case upstream is unavailable (default behavior)
- as the preferred source for downloads

But the most common use-case seems to provide a truely-LAN mirror
to speed up downloads in big corpos', and/or provide a 'trusted'
source for the tarballs.

So, make the following changes;
- if a mirror is specified, always try that before trying upstream

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: cvs retrieval first tries the mirror for tarballs

The cvs download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via cvs.

In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).

Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.

Of course, if no mirror is specified, no URL wil be available, and
the standard cvs retrieval will kick in.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

configure: do not require svn

svn is needed to download eglibc from the upstream repository.
In some situations, though, it can happen that:
- the developpers' machines do not have svn
- a LAN mirror has been set-up with pre-downloaded eglibc tarballs
In this case, it makes sense not to hard-depend on svn.

So, if svn is missing, just say so, and add a comment in the
menuconfig.

Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: svn retrieval first tries the mirror for tarballs

The svn download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via svn.

In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).

Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.

Of course, if no mirror is specified, no URL wil be available, and
the standard svn retrieval will kick in.

Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: if no upstream URL is given, silently ignore that

When retrieving tarballs from upstream, if no URL was given, do not
fail; simmply ignore that fact.

This will be used later when the SVN helper will call the standard
helper to try the LAN mirror before trying svn.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc: remove unneeded glibc/eglibc common functions

do_libc_locales_extract() and do_libc_locales() in glibc-eglibc.sh-common have
been overridden for both glibc and eglibc, so they can now be removed, which
this patch does.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

libc/glibc: add partial support for locales

This patch adds partial support for glibc locales.

For now, it only generates the appropriate locales when the host and the target
have the same endianness and uint32_t alignment.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

libc/eglibc: add support for locales

This patch adds support for eglibc locales.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

libc: create an infrastructure to build and install the libc locales

This patch adds a common glibc/eglibc infrastructure to build and install the
libc locales.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

1.12: update version to 1.12.0+hg

Tagging release 1.12.0

1.12: create maintenance branch, update version to 1.12.0

samples: update before release

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/mingw: fix mingw source dirs

Someof the mingw32 source tarballs have an appended '-src' after the
version.

Since changeset #6e1412ba8da9 (scripts/functions: force extract folder
to archive basename), it means mingw tarballs get extracted in a directory
ending with '-src'.

Fix that.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

cc/gcc: fortran requires GMP and MPFR

Even if gcc itself does not require GMP or MPFR (eg. gcc-4.2 and before
don't), building the fortran frontend always required those companion
libraries.

Select them if the Fortran language is selected.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

libc/uclibc: fix src dir location

Now that we akways extract the tarballs in a sane location (see changeset
#6e1412ba8da9: scripts/functions: force extract folder to archive basename),
the uClibc snapshot dir now has the date (as version) in it, eg.:
uClibc-20100710

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

Makefile: fix samples install

Installing samples was not installing the C library config file
and the reported.by description.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

config: don't require .config.2 to save a sample

Samples should contain kconfig-parsable definitions, not script variables.
.config.2 contains bash arrays, which is definitely not kconfig-safe...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

debug/gdb: don;t install sample gdbinit for old versions

Only starting with gdb-7 does installing the gdbinit sample makes senses.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

scripts/functions: force extract folder to archive basename

Some archives like those of the 2011.07 revisions of Linaro GCC contain a folder
name different from the archive basename, which leads to errors afterwards, e.g.
when patching. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 extracts to gcc-linaro-4.5-2011.07-0/

This patch changes CT_Extract() to force the extraction of all archives to a
folder named like the archive basename. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 now extracts to gcc-linaro-4.5-2011.07/

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

scripts/libc: do not build add-ons by default

Currently, no --enable-add-ons option is passed to libc configure when
"$(do_libc_add_ons_list ,)" is empty, which makes configure automatically search
for present add-ons. In that case, all present add-ons are built, although
no add-on was selected by the user in the config. Moreover, this can make the
configure fail if some non-standard add-ons like eglibc-localedef are present.

This behavior also leads to an inconsistency from a user point of view between
the following cases:
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS="none" in the config,
which makes "$(do_libc_add_ons_list ,)" return "", so all present add-ons
are built.
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS!="none" in the
config, which makes "$(do_libc_add_ons_list ,)" return the add-on supporting
the chosen threading implementation, e.g. "nptl", so only this add-on is
built.

This patch disables the building of all add-ons in that case.

It is still possible to build all present add-ons by adding --enable-add-ons to
LIBC_GLIBC_EXTRA_CONFIG_ARRAY.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

cc/gcc: bump Linaro GCC revisions to 2011.07

This patch bumps the Linaro GCC revisions to 2011.07 when applicable.
Note that the `-0' suffix has been removed from the Linaro versioning scheme
beginning with this version.

Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>

docs: add signed-off-by line to sample commit message

Signed-off-by: Titus von Boxberg <titus@v9g.de>

debug/gdb: install gdbinit sample file

gdb needs to know where to find the libstdc++ helper python script
to do, well, whatever it has to do with it...

We can't install that in the user's ~/.gdbinit, it's too complex to
handle all the cases. Moreover, if the user is using more than one
toolchain, we can't put all that stuff in there...

Just provide a sample config file the user can adapt to his/her
own needs.

Thanks go to Khem RAJ for providing such a hint:
http://sourceware.org/ml/crossgcc/2011-07/msg00026.html

Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: update table of content for known issues

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add 3.0 Woohoo! \o/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: prepare to handle 3.x

The place to get 3.x has changed; the version scheme has changed.

No need to be overkill, just support 3.x; 4.x is not even dreamt of.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

kernel/linux: add latest versions

Still waiting for 3.0, though... ;-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

docs: update known issues

Document the glibc build failures with male-3.82.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

misc: fix more typos here and there...

Reported-by: "Antony N. Pavlov" <antony@niisi.msk.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

misc: fix typos

Reported-by: "Antony N. Pavlov" <antony@niisi.msk.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>

1.11: update version to 1.11.4+hg

Tagging release 1.11.4

1.11: update version to 1.11.4

configure: add yet a bit more of autostuff compatibility

Well, at least it helps buildroot! :-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 9409fe04bb7ced9b228d6cce40d64ffbc41a964c)

scripts, cc/gcc: do not fail on existing symlinks or build.log

If the user builds a toolchain over an existing one, so, without removing
CT_PREFIX_DIR, the build fails as the symlinks already exist, as does the
build.log.

This can also happen (for build.log) if the user first ran in download-
or extract-only.

Patch (with no SoB) originally from:
Phil Wilshire <phil.wilshire@overturenetworks.com>

Modified by me as it did not apply cleanly.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 1ebc2248cc60230cd53ff94ae8f8f1e3261461a3)

scripts/internals: do not remove lib{32,64}/ symlinks after build

During the build, we create lib{32,64}/ symlinks out of the sysroot.
In some cases (eg. mingw32 target), these symlinks are still required
when running the toolchain. For other combinations, the symlinks are
without incidence, so they can be safely kept after the build.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 751c3f735ada4a95aa981841b832adb08b88ce27)

scripts: on startup, also remove the buildtools dir

In case there's one lingering around (whether the previous build was
successful, or failed), we have to remove the buildtools directory
as well as the toochain build dir.

This should also fix the case where out makeinfo wrapper calls
itself recursively.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
(transplanted from 0e8ff57073838afea8830fe09d1d01cdf7cb37d8)