diff -r 000000000000 -r 2ba5655f6297 patches/glibc/ports-2.13/360-tests-sandbox-libdl-paths.patch --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/patches/glibc/ports-2.13/360-tests-sandbox-libdl-paths.patch Tue May 03 00:19:56 2011 +0200 @@ -0,0 +1,193 @@ +when glibc runs its tests, it does so by invoking the local library loader. +in Gentoo, we build/run inside of our "sandbox" which itself is linked against +libdl (so that it can load libraries and pull out symbols). the trouble +is that when you upgrade from an older glibc to the new one, often times +internal symbols change name or abi. this is normally OK as you cannot use +libc.so from say version 2.3.6 but libpthread.so from say version 2.5, so +we always say "keep all of the glibc libraries from the same build". but +when glibc runs its tests, it uses dynamic paths to point to its new local +copies of libraries. if the test doesnt use libdl, then glibc doesnt add +its path, and when sandbox triggers the loading of libdl, glibc does so +from the host system system. this gets us into the case of all libraries +are from the locally compiled version of glibc except for libdl.so. + +Fix by Wormo + +http://bugs.gentoo.org/56898 + +diff -durN glibc-2.13.orig/grp/tst_fgetgrent.sh glibc-2.13/grp/tst_fgetgrent.sh +--- glibc-2.13.orig/grp/tst_fgetgrent.sh 2001-07-06 06:54:46.000000000 +0200 ++++ glibc-2.13/grp/tst_fgetgrent.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -24,7 +24,8 @@ + rtld_installed_name=$1; shift + + testout=${common_objpfx}/grp/tst_fgetgrent.out +-library_path=${common_objpfx} ++# make sure libdl is also in path in case sandbox is in use ++library_path=${common_objpfx}:${common_objpfx}/dlfcn + + result=0 + +diff -durN glibc-2.13.orig/iconvdata/run-iconv-test.sh glibc-2.13/iconvdata/run-iconv-test.sh +--- glibc-2.13.orig/iconvdata/run-iconv-test.sh 2008-05-15 03:59:44.000000000 +0200 ++++ glibc-2.13/iconvdata/run-iconv-test.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -34,7 +34,7 @@ + export GCONV_PATH + + # We have to have some directories in the library path. +-LIBPATH=$codir:$codir/iconvdata ++LIBPATH=$codir:$codir/iconvdata:$codir/dlfcn + + # How the start the iconv(1) program. + ICONV='$codir/elf/ld.so --library-path $LIBPATH --inhibit-rpath ${from}.so \ +diff -durN glibc-2.13.orig/iconvdata/tst-table.sh glibc-2.13/iconvdata/tst-table.sh +--- glibc-2.13.orig/iconvdata/tst-table.sh 2002-04-24 23:39:35.000000000 +0200 ++++ glibc-2.13/iconvdata/tst-table.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -59,8 +59,11 @@ + irreversible=${charset}.irreversible + fi + ++# make sure libdl is also in path in case sandbox is in use ++library_path=${common_objpfx}:${common_objpfx}/dlfcn ++ + # iconv in one direction. +-${common_objpfx}elf/ld.so --library-path $common_objpfx \ ++${common_objpfx}elf/ld.so --library-path $library_path \ + ${objpfx}tst-table-from ${charset} \ + > ${objpfx}tst-${charset}.table + +diff -durN glibc-2.13.orig/intl/tst-codeset.sh glibc-2.13/intl/tst-codeset.sh +--- glibc-2.13.orig/intl/tst-codeset.sh 2005-04-06 04:18:35.000000000 +0200 ++++ glibc-2.13/intl/tst-codeset.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -37,6 +37,9 @@ + LOCPATH=${common_objpfx}localedata + export LOCPATH + ++# make sure libdl is also in path in case sandbox is in use ++library_path=${common_objpfx}:${common_objpfx}/dlfcn ++ + ${common_objpfx}elf/ld.so --library-path $common_objpfx \ + ${objpfx}tst-codeset > ${objpfx}tst-codeset.out + +diff -durN glibc-2.13.orig/intl/tst-gettext.sh glibc-2.13/intl/tst-gettext.sh +--- glibc-2.13.orig/intl/tst-gettext.sh 2004-08-15 21:28:18.000000000 +0200 ++++ glibc-2.13/intl/tst-gettext.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -51,9 +51,12 @@ + LOCPATH=${common_objpfx}localedata + export LOCPATH + ++# make sure libdl is also in path in case sandbox is in use ++library_path=${common_objpfx}:${common_objpfx}/dlfcn ++ + # Now run the test. + MALLOC_TRACE=$malloc_trace LOCPATH=${objpfx}localedir:$LOCPATH \ +-${common_objpfx}elf/ld.so --library-path $common_objpfx \ ++${common_objpfx}elf/ld.so --library-path $library_path \ + ${objpfx}tst-gettext > ${objpfx}tst-gettext.out ${objpfx}domaindir + + exit $? +diff -durN glibc-2.13.orig/intl/tst-gettext2.sh glibc-2.13/intl/tst-gettext2.sh +--- glibc-2.13.orig/intl/tst-gettext2.sh 2005-05-04 19:54:48.000000000 +0200 ++++ glibc-2.13/intl/tst-gettext2.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -65,8 +65,11 @@ + LOCPATH=${objpfx}domaindir + export LOCPATH + ++# make sure libdl is also in path in case sandbox is in use ++library_path=${common_objpfx}:${common_objpfx}/dlfcn ++ + # Now run the test. +-${common_objpfx}elf/ld.so --library-path $common_objpfx \ ++${common_objpfx}elf/ld.so --library-path $library_path \ + ${objpfx}tst-gettext2 > ${objpfx}tst-gettext2.out ${objpfx}domaindir && + cmp ${objpfx}tst-gettext2.out - < ${objpfx}tst-translit.out ${objpfx}domaindir + + exit $? +diff -durN glibc-2.13.orig/malloc/tst-mtrace.sh glibc-2.13/malloc/tst-mtrace.sh +--- glibc-2.13.orig/malloc/tst-mtrace.sh 2005-10-15 01:40:35.000000000 +0200 ++++ glibc-2.13/malloc/tst-mtrace.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -24,9 +24,12 @@ + status=0 + trap "rm -f ${common_objpfx}malloc/tst-mtrace.leak; exit 1" 1 2 15 + ++# make sure libdl is also in path in case sandbox is in use ++library_path=${common_objpfx}:${common_objpfx}/dlfcn ++ + MALLOC_TRACE=${common_objpfx}malloc/tst-mtrace.leak \ + LOCPATH=${common_objpfx}localedata GCONV_PATH=${common_objpfx}iconvdata \ +-${common_objpfx}elf/ld.so --library-path $common_objpfx \ ++${common_objpfx}elf/ld.so --library-path $library_path \ + ${common_objpfx}malloc/tst-mtrace || status=1 + + if test $status -eq 0 && test -f ${common_objpfx}malloc/mtrace; then +diff -durN glibc-2.13.orig/nptl/tst-tls6.sh glibc-2.13/nptl/tst-tls6.sh +--- glibc-2.13.orig/nptl/tst-tls6.sh 2003-09-03 00:02:59.000000000 +0200 ++++ glibc-2.13/nptl/tst-tls6.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -5,8 +5,8 @@ + rtld_installed_name=$1; shift + logfile=$common_objpfx/nptl/tst-tls6.out + +-# We have to find libc and nptl +-library_path=${common_objpfx}:${common_objpfx}nptl ++# We have to find libc and nptl (also libdl in case sandbox is in use) ++library_path=${common_objpfx}:${common_objpfx}nptl:${common_objpfx}/dlfcn + tst_tls5="${elf_objpfx}${rtld_installed_name} --library-path ${library_path} \ + ${common_objpfx}/nptl/tst-tls5" + +diff -durN glibc-2.13.orig/posix/globtest.sh glibc-2.13/posix/globtest.sh +--- glibc-2.13.orig/posix/globtest.sh 2008-12-06 07:05:39.000000000 +0100 ++++ glibc-2.13/posix/globtest.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -18,7 +18,7 @@ + esac + + # We have to find the libc and the NSS modules. +-library_path=${common_objpfx}:${common_objpfx}nss:${common_objpfx}nis:${common_objpfx}db2:${common_objpfx}hesiod ++library_path=${common_objpfx}:${common_objpfx}nss:${common_objpfx}nis:${common_objpfx}db2:${common_objpfx}hesiod:${common_objpfx}/dlfcn + + # Since we use `sort' we must make sure to use the same locale everywhere. + LC_ALL=C +diff -durN glibc-2.13.orig/posix/tst-getconf.sh glibc-2.13/posix/tst-getconf.sh +--- glibc-2.13.orig/posix/tst-getconf.sh 2002-09-01 13:11:25.000000000 +0200 ++++ glibc-2.13/posix/tst-getconf.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -10,7 +10,10 @@ + else + rtld_installed_name=$1; shift + runit() { +- ${elf_objpfx}${rtld_installed_name} --library-path ${common_objpfx} "$@" ++ ++ # make sure libdl is also in path in case sandbox is in use ++ library_path=${common_objpfx}:${common_objpfx}/dlfcn ++ ${elf_objpfx}${rtld_installed_name} --library-path ${library_path} "$@" + } + fi + +diff -durN glibc-2.13.orig/posix/wordexp-tst.sh glibc-2.13/posix/wordexp-tst.sh +--- glibc-2.13.orig/posix/wordexp-tst.sh 2000-10-20 18:23:30.000000000 +0200 ++++ glibc-2.13/posix/wordexp-tst.sh 2009-11-13 00:50:37.000000000 +0100 +@@ -19,8 +19,11 @@ + " + export IFS + ++# make sure libdl is also in path in case sandbox is in use ++library_path=${common_objpfx}:${common_objpfx}/dlfcn ++ + failed=0 +-${elf_objpfx}${rtld_installed_name} --library-path ${common_objpfx} \ ++${elf_objpfx}${rtld_installed_name} --library-path ${library_path} \ + ${common_objpfx}posix/wordexp-test '$*' > ${testout}1 + cat <<"EOF" | cmp - ${testout}1 >> $logfile || failed=1 + wordexp returned 0