diff -r 11c23aa9c9f9 -r 4e9c41579ebd docs/ct-ng.1.in --- a/docs/ct-ng.1.in Wed Aug 15 22:06:22 2012 +0200 +++ b/docs/ct-ng.1.in Wed Jul 17 08:25:42 2013 +0200 @@ -22,7 +22,7 @@ .B crosstool-NG makes it easy to build cross-toolchains, and allows you to take all the juice out of your target by configuring the different components of the toolchain -accordingly to the targeted processor. +according to the targeted processor. ." ." .SH ACTIONS @@ -62,10 +62,10 @@ .TP .B defconfig Save the current configuration to a mini-defconfig file, that contains only -the strictly required symbols to reproduce the configuraiton. defconfig files +the strictly required symbols to reproduce the configuration. defconfig files are much smaller than a complete .config, so it is easy to send by mail. As only non-default symbols are present in a defconfig, it easy to spot the -meaningfull values. Also, it is easy to use defconfig files with newer +meaningful values. Also, it is easy to use defconfig files with newer versions of .BR crosstool-NG . By default the mini-defconfig is saved to a file named @@ -92,11 +92,11 @@ .B crosstool-NG using a mini-defconfig file (previously saved with .B defconfig -or manually edited). The default mini-defconfig is rad from the file +or manually edited). The default mini-defconfig is read from the file .IR defconfig , -unless the vraiable +unless the variable .B $DEFCONFIG -is set, inwhich case the mini-defconfig will be read from the file referenced +is set, in which case the mini-defconfig will be read from the file referenced by .B $DEFCONFIG ." @@ -162,9 +162,9 @@ ." .SH BUGS As of today (@@CT_DATE@@), building tarballs is broken. It is difficult to -foresee how every parts of +foresee how all parts of .B crosstool-NG -are going to be installed. Each parts is needed to build a tarball, as it +are going to be installed. Each part is needed to build a tarball, as it contains all that is needed to rebuild the toolchain from scratch: toolchain components' sources, .B crosstool-NG