diff -r 9227d2a2c080 -r c4d124ed9f8e patches/glibc/2_9/400-tests-sandbox-libdl-paths.patch --- a/patches/glibc/2_9/400-tests-sandbox-libdl-paths.patch Sat Apr 11 19:03:02 2009 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,198 +0,0 @@ -Original patch from: gentoo/src/patchsets/glibc/2.9/3020_all_glibc-tests-sandbox-libdl-paths.patch - --= BEGIN original header =- -when glibc runs its tests, it does so by invoking the local library loader. -in Gentoo, we build/run inside of our "sandbox" which itself is linked against -libdl (so that it can load libraries and pull out symbols). the trouble -is that when you upgrade from an older glibc to the new one, often times -internal symbols change name or abi. this is normally OK as you cannot use -libc.so from say version 2.3.6 but libpthread.so from say version 2.5, so -we always say "keep all of the glibc libraries from the same build". but -when glibc runs its tests, it uses dynamic paths to point to its new local -copies of libraries. if the test doesnt use libdl, then glibc doesnt add -its path, and when sandbox triggers the loading of libdl, glibc does so -from the host system system. this gets us into the case of all libraries -are from the locally compiled version of glibc except for libdl.so. - -Fix by Wormo - -http://bugs.gentoo.org/56898 - --= END original header =- - -diff -durN glibc-2_9.orig/grp/tst_fgetgrent.sh glibc-2_9/grp/tst_fgetgrent.sh ---- glibc-2_9.orig/grp/tst_fgetgrent.sh 2001-07-06 06:54:46.000000000 +0200 -+++ glibc-2_9/grp/tst_fgetgrent.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -24,7 +24,8 @@ - rtld_installed_name=$1; shift - - testout=${common_objpfx}/grp/tst_fgetgrent.out --library_path=${common_objpfx} -+# make sure libdl is also in path in case sandbox is in use -+library_path=${common_objpfx}:${common_objpfx}/dlfcn - - result=0 - -diff -durN glibc-2_9.orig/iconvdata/run-iconv-test.sh glibc-2_9/iconvdata/run-iconv-test.sh ---- glibc-2_9.orig/iconvdata/run-iconv-test.sh 2008-05-15 03:59:44.000000000 +0200 -+++ glibc-2_9/iconvdata/run-iconv-test.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -34,7 +34,7 @@ - export GCONV_PATH - - # We have to have some directories in the library path. --LIBPATH=$codir:$codir/iconvdata -+LIBPATH=$codir:$codir/iconvdata:$codir/dlfcn - - # How the start the iconv(1) program. - ICONV='$codir/elf/ld.so --library-path $LIBPATH --inhibit-rpath ${from}.so \ -diff -durN glibc-2_9.orig/iconvdata/tst-table.sh glibc-2_9/iconvdata/tst-table.sh ---- glibc-2_9.orig/iconvdata/tst-table.sh 2002-04-24 23:39:35.000000000 +0200 -+++ glibc-2_9/iconvdata/tst-table.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -59,8 +59,11 @@ - irreversible=${charset}.irreversible - fi - -+# make sure libdl is also in path in case sandbox is in use -+library_path=${common_objpfx}:${common_objpfx}/dlfcn -+ - # iconv in one direction. --${common_objpfx}elf/ld.so --library-path $common_objpfx \ -+${common_objpfx}elf/ld.so --library-path $library_path \ - ${objpfx}tst-table-from ${charset} \ - > ${objpfx}tst-${charset}.table - -diff -durN glibc-2_9.orig/intl/tst-codeset.sh glibc-2_9/intl/tst-codeset.sh ---- glibc-2_9.orig/intl/tst-codeset.sh 2005-04-06 04:18:35.000000000 +0200 -+++ glibc-2_9/intl/tst-codeset.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -37,6 +37,9 @@ - LOCPATH=${common_objpfx}localedata - export LOCPATH - -+# make sure libdl is also in path in case sandbox is in use -+library_path=${common_objpfx}:${common_objpfx}/dlfcn -+ - ${common_objpfx}elf/ld.so --library-path $common_objpfx \ - ${objpfx}tst-codeset > ${objpfx}tst-codeset.out - -diff -durN glibc-2_9.orig/intl/tst-gettext.sh glibc-2_9/intl/tst-gettext.sh ---- glibc-2_9.orig/intl/tst-gettext.sh 2004-08-15 21:28:18.000000000 +0200 -+++ glibc-2_9/intl/tst-gettext.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -51,9 +51,12 @@ - LOCPATH=${common_objpfx}localedata - export LOCPATH - -+# make sure libdl is also in path in case sandbox is in use -+library_path=${common_objpfx}:${common_objpfx}/dlfcn -+ - # Now run the test. - MALLOC_TRACE=$malloc_trace LOCPATH=${objpfx}localedir:$LOCPATH \ --${common_objpfx}elf/ld.so --library-path $common_objpfx \ -+${common_objpfx}elf/ld.so --library-path $library_path \ - ${objpfx}tst-gettext > ${objpfx}tst-gettext.out ${objpfx}domaindir - - exit $? -diff -durN glibc-2_9.orig/intl/tst-gettext2.sh glibc-2_9/intl/tst-gettext2.sh ---- glibc-2_9.orig/intl/tst-gettext2.sh 2005-05-04 19:54:48.000000000 +0200 -+++ glibc-2_9/intl/tst-gettext2.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -65,8 +65,11 @@ - LOCPATH=${objpfx}domaindir - export LOCPATH - -+# make sure libdl is also in path in case sandbox is in use -+library_path=${common_objpfx}:${common_objpfx}/dlfcn -+ - # Now run the test. --${common_objpfx}elf/ld.so --library-path $common_objpfx \ -+${common_objpfx}elf/ld.so --library-path $library_path \ - ${objpfx}tst-gettext2 > ${objpfx}tst-gettext2.out ${objpfx}domaindir && - cmp ${objpfx}tst-gettext2.out - < ${objpfx}tst-translit.out ${objpfx}domaindir - - exit $? -diff -durN glibc-2_9.orig/malloc/tst-mtrace.sh glibc-2_9/malloc/tst-mtrace.sh ---- glibc-2_9.orig/malloc/tst-mtrace.sh 2005-10-15 01:40:35.000000000 +0200 -+++ glibc-2_9/malloc/tst-mtrace.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -24,9 +24,12 @@ - status=0 - trap "rm -f ${common_objpfx}malloc/tst-mtrace.leak; exit 1" 1 2 15 - -+# make sure libdl is also in path in case sandbox is in use -+library_path=${common_objpfx}:${common_objpfx}/dlfcn -+ - MALLOC_TRACE=${common_objpfx}malloc/tst-mtrace.leak \ - LOCPATH=${common_objpfx}localedata GCONV_PATH=${common_objpfx}iconvdata \ --${common_objpfx}elf/ld.so --library-path $common_objpfx \ -+${common_objpfx}elf/ld.so --library-path $library_path \ - ${common_objpfx}malloc/tst-mtrace || status=1 - - if test $status -eq 0 && test -f ${common_objpfx}malloc/mtrace; then -diff -durN glibc-2_9.orig/nptl/tst-tls6.sh glibc-2_9/nptl/tst-tls6.sh ---- glibc-2_9.orig/nptl/tst-tls6.sh 2003-09-03 00:02:59.000000000 +0200 -+++ glibc-2_9/nptl/tst-tls6.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -5,8 +5,8 @@ - rtld_installed_name=$1; shift - logfile=$common_objpfx/nptl/tst-tls6.out - --# We have to find libc and nptl --library_path=${common_objpfx}:${common_objpfx}nptl -+# We have to find libc and nptl (also libdl in case sandbox is in use) -+library_path=${common_objpfx}:${common_objpfx}nptl:${common_objpfx}/dlfcn - tst_tls5="${elf_objpfx}${rtld_installed_name} --library-path ${library_path} \ - ${common_objpfx}/nptl/tst-tls5" - -diff -durN glibc-2_9.orig/posix/globtest.sh glibc-2_9/posix/globtest.sh ---- glibc-2_9.orig/posix/globtest.sh 2007-02-14 20:52:33.000000000 +0100 -+++ glibc-2_9/posix/globtest.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -18,7 +18,7 @@ - esac - - # We have to find the libc and the NSS modules. --library_path=${common_objpfx}:${common_objpfx}nss:${common_objpfx}nis:${common_objpfx}db2:${common_objpfx}hesiod -+library_path=${common_objpfx}:${common_objpfx}nss:${common_objpfx}nis:${common_objpfx}db2:${common_objpfx}hesiod:${common_objpfx}/dlfcn - - # Since we use `sort' we must make sure to use the same locale everywhere. - LC_ALL=C -diff -durN glibc-2_9.orig/posix/tst-getconf.sh glibc-2_9/posix/tst-getconf.sh ---- glibc-2_9.orig/posix/tst-getconf.sh 2002-09-01 13:11:25.000000000 +0200 -+++ glibc-2_9/posix/tst-getconf.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -10,7 +10,10 @@ - else - rtld_installed_name=$1; shift - runit() { -- ${elf_objpfx}${rtld_installed_name} --library-path ${common_objpfx} "$@" -+ -+ # make sure libdl is also in path in case sandbox is in use -+ library_path=${common_objpfx}:${common_objpfx}/dlfcn -+ ${elf_objpfx}${rtld_installed_name} --library-path ${library_path} "$@" - } - fi - -diff -durN glibc-2_9.orig/posix/wordexp-tst.sh glibc-2_9/posix/wordexp-tst.sh ---- glibc-2_9.orig/posix/wordexp-tst.sh 2000-10-20 18:23:30.000000000 +0200 -+++ glibc-2_9/posix/wordexp-tst.sh 2009-02-02 22:01:23.000000000 +0100 -@@ -19,8 +19,11 @@ - " - export IFS - -+# make sure libdl is also in path in case sandbox is in use -+library_path=${common_objpfx}:${common_objpfx}/dlfcn -+ - failed=0 --${elf_objpfx}${rtld_installed_name} --library-path ${common_objpfx} \ -+${elf_objpfx}${rtld_installed_name} --library-path ${library_path} \ - ${common_objpfx}posix/wordexp-test '$*' > ${testout}1 - cat <<"EOF" | cmp - ${testout}1 >> $logfile || failed=1 - wordexp returned 0