1.1 --- a/docs/ct-ng.1.in Wed Jul 10 12:40:21 2013 +0100
1.2 +++ b/docs/ct-ng.1.in Wed Jul 17 08:25:42 2013 +0200
1.3 @@ -22,7 +22,7 @@
1.4 .B crosstool-NG
1.5 makes it easy to build cross-toolchains, and allows you to take all the juice
1.6 out of your target by configuring the different components of the toolchain
1.7 -accordingly to the targeted processor.
1.8 +according to the targeted processor.
1.9 ."
1.10 ."
1.11 .SH ACTIONS
1.12 @@ -62,10 +62,10 @@
1.13 .TP
1.14 .B defconfig
1.15 Save the current configuration to a mini-defconfig file, that contains only
1.16 -the strictly required symbols to reproduce the configuraiton. defconfig files
1.17 +the strictly required symbols to reproduce the configuration. defconfig files
1.18 are much smaller than a complete .config, so it is easy to send by mail. As
1.19 only non-default symbols are present in a defconfig, it easy to spot the
1.20 -meaningfull values. Also, it is easy to use defconfig files with newer
1.21 +meaningful values. Also, it is easy to use defconfig files with newer
1.22 versions of
1.23 .BR crosstool-NG .
1.24 By default the mini-defconfig is saved to a file named
1.25 @@ -92,11 +92,11 @@
1.26 .B crosstool-NG
1.27 using a mini-defconfig file (previously saved with
1.28 .B defconfig
1.29 -or manually edited). The default mini-defconfig is rad from the file
1.30 +or manually edited). The default mini-defconfig is read from the file
1.31 .IR defconfig ,
1.32 -unless the vraiable
1.33 +unless the variable
1.34 .B $DEFCONFIG
1.35 -is set, inwhich case the mini-defconfig will be read from the file referenced
1.36 +is set, in which case the mini-defconfig will be read from the file referenced
1.37 by
1.38 .B $DEFCONFIG
1.39 ."
1.40 @@ -162,9 +162,9 @@
1.41 ."
1.42 .SH BUGS
1.43 As of today (@@CT_DATE@@), building tarballs is broken. It is difficult to
1.44 -foresee how every parts of
1.45 +foresee how all parts of
1.46 .B crosstool-NG
1.47 -are going to be installed. Each parts is needed to build a tarball, as it
1.48 +are going to be installed. Each part is needed to build a tarball, as it
1.49 contains all that is needed to rebuild the toolchain from scratch: toolchain
1.50 components' sources,
1.51 .B crosstool-NG