diff options
Diffstat (limited to 'patches/gcc/3.4.5')
| -rw-r--r-- | patches/gcc/3.4.5/fix-fixincl.patch | 70 | ||||
| -rw-r--r-- | patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch | 82 | ||||
| -rw-r--r-- | patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch | 27 | ||||
| -rw-r--r-- | patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch | 24 | ||||
| -rw-r--r-- | patches/gcc/3.4.5/pr15068-fix.patch | 44 |
5 files changed, 247 insertions, 0 deletions
diff --git a/patches/gcc/3.4.5/fix-fixincl.patch b/patches/gcc/3.4.5/fix-fixincl.patch new file mode 100644 index 0000000..7936b19 --- /dev/null +++ b/patches/gcc/3.4.5/fix-fixincl.patch @@ -0,0 +1,70 @@ +See http://gcc.gnu.org/PR22541 + +From: Dan Kegel + +When building gcc-3.4.3 or gcc-4.0.0 as a cross into a clean $PREFIX +(the only two I've tried like this), the configure script happily copies +the glibc include files from include to sys-include; here's the line +from the log file (with $PREFIX instead of the real prefix): + +Copying $PREFIX/i686-unknown-linux-gnu/include to $PREFIX/i686-unknown-linux-gnu/sys-include + +But later, when running fixincludes, it gives the error message + The directory that should contain system headers does not exist: + $PREFIX/lib/gcc/i686-unknown-linux-gnu/3.4.3/../../../../i686-unknown-linux-gnu/sys-include + +Nevertheless, it continues building; the header files it installs in + $PREFIX/lib/gcc/i686-unknown-linux-gnu/3.4.3/include +do not include the boilerplate that would cause it to #include_next the +glibc headers in the system header directory. +Thus the resulting toolchain can't compile the following program: +#include <limits.h> +int x = PATH_MAX; +because its limits.h doesn't include the glibc header. + +That's not nice. I suspect the problem is that gcc/Makefile.in assumes that +it can refer to $PREFIX/i686-unknown-linux-gnu with the path + $PREFIX/lib/../i686-unknown-linux-gnu, but +that fails because the directory $PREFIX/lib doesn't exist during 'make all'; +it is only created later, during 'make install'. (Which makes this problem +confusing, since one only notices the breakage well after 'make install', +at which point the path configure complained about does exist, and has the +right stuff in it.) + +A possible fix is to replace the line in gcc/Makefile.in that says + SYSTEM_HEADER_DIR = @SYSTEM_HEADER_DIR@ +with a version that gets rid of extra ..'s, e.g. + SYSTEM_HEADER_DIR = `echo @SYSTEM_HEADER_DIR@ | sed -e :a -e "s,[^/]*/\.\.\/,,;ta"` +(hey, that's the first time I've ever used a label in a sed script; thanks to the sed faq +for explaining the :a ... ta method of looping to repeat a search-and-replace until it doesn't match.) + + +--- gcc-3.4.3/gcc/Makefile.in.foo 2005-05-20 11:41:39.000000000 -0700 ++++ gcc-3.4.3/gcc/Makefile.in 2005-05-20 12:08:46.000000000 -0700 +@@ -350,7 +350,10 @@ + CROSS_SYSTEM_HEADER_DIR = @CROSS_SYSTEM_HEADER_DIR@ + + # autoconf sets SYSTEM_HEADER_DIR to one of the above. +-SYSTEM_HEADER_DIR = @SYSTEM_HEADER_DIR@ ++# Purge it of unneccessary internal relative paths ++# to directories that might not exist yet. ++# The sed idiom for this is to repeat the search-and-replace until it doesn't match, using :a ... ta. ++SYSTEM_HEADER_DIR = `echo @SYSTEM_HEADER_DIR@ | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta` + + # Control whether to run fixproto and fixincludes. + STMP_FIXPROTO = @STMP_FIXPROTO@ +@@ -2532,11 +2535,13 @@ + $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(gcc_tooldir) + + # Build fixed copies of system files. ++# Abort if no system headers available, unless building a crosscompiler. ++# FIXME: abort unless building --without-headers would be more accurate and less ugly + stmp-fixinc: fixinc.sh gsyslimits.h + @if test ! -d ${SYSTEM_HEADER_DIR}; then \ + echo The directory that should contain system headers does not exist: >&2 ; \ + echo " ${SYSTEM_HEADER_DIR}" >&2 ; \ +- if test "x${SYSTEM_HEADER_DIR}" = "x${gcc_tooldir}/sys-include"; \ ++ if test "x${SYSTEM_HEADER_DIR}" = "x`echo "${gcc_tooldir}/sys-include" | sed -e :a -e "s,[^/]*/\.\.\/,," -e ta`"; \ + then sleep 1; else exit 1; fi; \ + fi + rm -rf include; mkdir include diff --git a/patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch b/patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch new file mode 100644 index 0000000..f7178c1 --- /dev/null +++ b/patches/gcc/3.4.5/gcc-3.4.0-arm-bigendian.patch @@ -0,0 +1,82 @@ +By Lennert Buytenhek <buytenh@wantstofly.org> +Adds support for arm*b-linux* big-endian ARM targets + +Fixes build error + +/opt/crosstool/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/armeb-unknown-linux-gnu/bin/ld: unrecognised emulation mode: armelf_linux +Supported emulations: armelfb_linux armelfb +collect2: ld returned 1 exit status +make[2]: *** [/home/dank/wk/crosstool-0.28-rc36/build/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/build-glibc/csu/crt1.o] Error 1 +make[2]: Leaving directory `/home/dank/wk/crosstool-0.28-rc36/build/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/glibc-2.3.3/csu' +make[1]: *** [csu/subdir_lib] Error 2 +make[1]: Leaving directory `/home/dank/wk/crosstool-0.28-rc36/build/armeb-unknown-linux-gnu/gcc-3.4.2-glibc-2.3.3/glibc-2.3.3' +make: *** [all] Error 2 + + +See http://gcc.gnu.org/PR16350 + +diff -urN gcc-3.4.0.orig/gcc/config/arm/linux-elf.h gcc-3.4.0/gcc/config/arm/linux-elf.h +--- gcc-3.4.0.orig/gcc/config/arm/linux-elf.h 2004-01-31 07:18:11.000000000 +0100 ++++ gcc-3.4.0/gcc/config/arm/linux-elf.h 2004-07-02 14:46:29.225443757 +0200 +@@ -30,17 +30,34 @@ + /* Do not assume anything about header files. */ + #define NO_IMPLICIT_EXTERN_C + ++/* ++ * 'config.gcc' defines TARGET_BIG_ENDIAN_DEFAULT as 1 for arm*b-* ++ * (big endian) configurations. ++ */ ++#if TARGET_BIG_ENDIAN_DEFAULT ++#define TARGET_ENDIAN_DEFAULT ARM_FLAG_BIG_END ++#define TARGET_ENDIAN_OPTION "mbig-endian" ++#define TARGET_LINKER_EMULATION "armelfb_linux" ++#else ++#define TARGET_ENDIAN_DEFAULT 0 ++#define TARGET_ENDIAN_OPTION "mlittle-endian" ++#define TARGET_LINKER_EMULATION "armelf_linux" ++#endif ++ + /* Default is to use APCS-32 mode. */ + #undef TARGET_DEFAULT +-#define TARGET_DEFAULT (ARM_FLAG_APCS_32 | ARM_FLAG_MMU_TRAPS) ++#define TARGET_DEFAULT \ ++ ( ARM_FLAG_APCS_32 | \ ++ ARM_FLAG_MMU_TRAPS | \ ++ TARGET_ENDIAN_DEFAULT ) + + #define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm6 + +-#define SUBTARGET_EXTRA_LINK_SPEC " -m armelf_linux -p" ++#define SUBTARGET_EXTRA_LINK_SPEC " -m " TARGET_LINKER_EMULATION " -p" + + #undef MULTILIB_DEFAULTS + #define MULTILIB_DEFAULTS \ +- { "marm", "mlittle-endian", "mhard-float", "mapcs-32", "mno-thumb-interwork" } ++ { "marm", TARGET_ENDIAN_OPTION, "mhard-float", "mapcs-32", "mno-thumb-interwork" } + + #define CPP_APCS_PC_DEFAULT_SPEC "-D__APCS_32__" + +@@ -89,7 +106,7 @@ + %{rdynamic:-export-dynamic} \ + %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2} \ + -X \ +- %{mbig-endian:-EB}" \ ++ %{mbig-endian:-EB} %{mlittle-endian:-EL}" \ + SUBTARGET_EXTRA_LINK_SPEC + + #define TARGET_OS_CPP_BUILTINS() LINUX_TARGET_OS_CPP_BUILTINS() +diff -urN gcc-3.4.0.orig/gcc/config.gcc gcc-3.4.0/gcc/config.gcc +--- gcc-3.4.0.orig/gcc/config.gcc 2004-04-17 04:28:24.000000000 +0200 ++++ gcc-3.4.0/gcc/config.gcc 2004-07-02 14:44:40.045822542 +0200 +@@ -666,6 +666,11 @@ + ;; + arm*-*-linux*) # ARM GNU/Linux with ELF + tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h" ++ case $target in ++ arm*b-*) ++ tm_defines="TARGET_BIG_ENDIAN_DEFAULT=1 $tm_defines" ++ ;; ++ esac + tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux" + extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o" + gnu_ld=yes diff --git a/patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch b/patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch new file mode 100644 index 0000000..69a79d5 --- /dev/null +++ b/patches/gcc/3.4.5/gcc-3.4.0-arm-lib1asm.patch @@ -0,0 +1,27 @@ +# Origin: from a patch by Dimitry Andric <dimitry@andric.com>, 2004-05-01 +# See http://gcc.gnu.org/PR14352 and http://gcc.gnu.org/PR16314 +# See also http://gcc.gnu.org/ml/gcc-patches/2004-08/msg02568.html et seq for why this isn't in mainline +# Fixes errors like the following when building glibc (or any other executable +# or shared library) when using gcc 3.4.0 for ARM with softfloat: +# +# .../libc_pic.os(.text+0x15834): In function `__modf': undefined reference to `__subdf3' +# .../libc_pic.os(.text+0x158b8): In function `__modf': undefined reference to `__subdf3' +# .../libc_pic.os(.text+0x1590c): In function `scalbn': undefined reference to `__muldf3' +# .../libc_pic.os(.text+0x15e94): In function `__ldexpf': undefined reference to `__eqsf2' +# .../libc_pic.os(.text+0xcee4c): In function `monstartup': undefined reference to `__fixsfsi' + +diff -urNd gcc-3.4.0-orig/gcc/config/arm/t-linux gcc-3.4.0/gcc/config/arm/t-linux +--- gcc-3.4.0-orig/gcc/config/arm/t-linux 2003-09-20 23:09:07.000000000 +0200 ++++ gcc-3.4.0/gcc/config/arm/t-linux 2004-05-01 20:31:59.102846400 +0200 +@@ -4,7 +4,10 @@ + LIBGCC2_DEBUG_CFLAGS = -g0 + + LIB1ASMSRC = arm/lib1funcs.asm +-LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx ++LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \ ++ _negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi _fixunsdfsi \ ++ _truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \ ++ _fixsfsi _fixunssfsi + + # MULTILIB_OPTIONS = mhard-float/msoft-float + # MULTILIB_DIRNAMES = hard-float soft-float diff --git a/patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch b/patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch new file mode 100644 index 0000000..43eed3e --- /dev/null +++ b/patches/gcc/3.4.5/gcc-3.4.0-arm-nolibfloat.patch @@ -0,0 +1,24 @@ +# Dimitry Andric <dimitry@andric.com>, 2004-05-01 +# +# * Removed the extra -lfloat option from LIBGCC_SPEC, since it isn't needed +# anymore. (The required functions are now in libgcc.) +# +# Fixes errors like +# arm-softfloat-linux-gnu/3.4.0/../../../../arm-softfloat-linux-gnu/bin/ld: cannot find -lfloat +# collect2: ld returned 1 exit status +# make[2]: *** [arm-softfloat-linux-gnu/gcc-3.4.0-glibc-2.3.2/build-glibc/iconvdata/ISO8859-1.so] Error 1 +# when building glibc-2.3.3 with gcc-3.4.0 for arm-softfloat + +diff -urNd gcc-3.4.0-orig/gcc/config/arm/linux-elf.h gcc-3.4.0/gcc/config/arm/linux-elf.h +--- gcc-3.4.0-orig/gcc/config/arm/linux-elf.h 2004-01-31 07:18:11.000000000 +0100 ++++ gcc-3.4.0/gcc/config/arm/linux-elf.h 2004-05-01 19:19:06.935979200 +0200 +@@ -55,7 +73,7 @@ + %{shared:-lc} \ + %{!shared:%{profile:-lc_p}%{!profile:-lc}}" + +-#define LIBGCC_SPEC "%{msoft-float:-lfloat} -lgcc" ++#define LIBGCC_SPEC "-lgcc" + + /* Provide a STARTFILE_SPEC appropriate for GNU/Linux. Here we add + the GNU/Linux magical crtbegin.o file (see crtstuff.c) which + diff --git a/patches/gcc/3.4.5/pr15068-fix.patch b/patches/gcc/3.4.5/pr15068-fix.patch new file mode 100644 index 0000000..2977765 --- /dev/null +++ b/patches/gcc/3.4.5/pr15068-fix.patch @@ -0,0 +1,44 @@ +See http://gcc.gnu.org/PR15068 + +Fixes error + +../sysdeps/generic/s_fmax.c: In function `__fmax': +../sysdeps/generic/s_fmax.c:28: internal compiler error: in elim_reg_cond, at flow.c:3257 +Please submit a full bug report, +with preprocessed source if appropriate. +See <URL:http://gcc.gnu.org/bugs.html> for instructions. +make[2]: *** [/home/dank/wk/crosstool-0.28-rc35/build/arm-unknown-linux-gnu/gcc-3.4.1-glibc-20040822/build-glibc/math/s_fmax.o] Error 1 +make[2]: Leaving directory `/home/dank/wk/crosstool-0.28-rc35/build/arm-unknown-linux-gnu/gcc-3.4.1-glibc-20040822/glibc-20040822/math' +make[1]: *** [math/others] Error 2 +make[1]: Leaving directory `/home/dank/wk/crosstool-0.28-rc35/build/arm-unknown-linux-gnu/gcc-3.4.1-glibc-20040822/glibc-20040822' +make: *** [all] Error 2 + +[ rediffed against gcc-3.4.1, with elbow grease, ending up with same thing as +http://gcc.gnu.org/cgi-bin/cvsweb.cgi/gcc/gcc/flow.c.diff?cvsroot=gcc&only_with_tag=csl-arm-branch&r1=1.563.4.2&r2=1.563.4.3 ] + +--- gcc-3.4.1/gcc/flow.c.old 2004-02-27 19:39:19.000000000 -0800 ++++ gcc-3.4.1/gcc/flow.c 2004-08-26 07:29:46.000000000 -0700 +@@ -1878,6 +1878,7 @@ + rtx set_src = SET_SRC (pc_set (BB_END (bb))); + rtx cond_true = XEXP (set_src, 0); + rtx reg = XEXP (cond_true, 0); ++ enum rtx_code inv_cond; + + if (GET_CODE (reg) == SUBREG) + reg = SUBREG_REG (reg); +@@ -1886,11 +1887,13 @@ + in the form of a comparison of a register against zero. + If the condition is more complex than that, then it is safe + not to record any information. */ +- if (GET_CODE (reg) == REG ++ inv_cond = reversed_comparison_code (cond_true, BB_END (bb)); ++ if (inv_cond != UNKNOWN ++ && GET_CODE (reg) == REG + && XEXP (cond_true, 1) == const0_rtx) + { + rtx cond_false +- = gen_rtx_fmt_ee (reverse_condition (GET_CODE (cond_true)), ++ = gen_rtx_fmt_ee (inv_cond, + GET_MODE (cond_true), XEXP (cond_true, 0), + XEXP (cond_true, 1)); + if (GET_CODE (XEXP (set_src, 1)) == PC) |