#!@@CT_bash@@

# Copyright 2007 Yann E. MORIN

# Licensed under the GPL v2. See COPYING in the root of this package.

# This is the main entry point to crosstool

# This will:

#   - download, extract and patch the toolchain components

#   - build and install each components in turn

#   - and eventually test the resulting toolchain

# What this file does is prepare the environment, based upon the user-choosen

# options. It also checks the existing environment for un-friendly variables,

# and builds the tools.

# Parse the common functions

# Note: some initialisation and sanitizing is done while parsing this file,

# most notably:

#  - set trap handler on errors,

#  - don't hash commands lookups,

#  - initialise logging.

. "${CT_LIB_DIR}/scripts/functions"

# Parse the configuration file

# It has some info about the logging facility, so include it early

. .config

# Yes! We can do full logging from now on!

# Overide the locale early, in case we ever translate crosstool-NG messages

if [ -z "${CT_NO_OVERIDE_LC_MESSAGES}" ]; then

    export LC_ALL=C

    export LANG=C

fi

# remove . from PATH since it can cause gcc build failures

CT_SanitizePath

# Some sanity checks in the environment and needed tools

CT_DoLog INFO "Performing some trivial sanity checks"

CT_TestAndAbort "Don't set LD_LIBRARY_PATH. It screws up the build." -n "${LD_LIBRARY_PATH}"

CT_TestAndAbort "Don't set CFLAGS. It screws up the build." -n "${CFLAGS}"

CT_TestAndAbort "Don't set CXXFLAGS. It screws up the build." -n "${CXXFLAGS}"

CT_Test "GREP_OPTIONS screws up the build. Resetting." -n "${GREP_OPTIONS}"

export GREP_OPTIONS=

# Some sanity checks on paths content

for d in            \

    LOCAL_TARBALLS  \

    WORK            \

    PREFIX          \

    INSTALL         \

    ; do

        eval dir="\${CT_${d}_DIR}"

        case "${dir}" in

            *" "*)

                CT_Abort "'CT_${d}_DIR'='${dir}' contains a space in it.\nDon't use spaces in paths, it breaks things."

                ;;

        esac

done

# Where will we work?

CT_WORK_DIR="${CT_WORK_DIR:-${CT_TOP_DIR}/targets}"

CT_DoExecLog ALL mkdir -p "${CT_WORK_DIR}"

# Check build file system case-sensitiveness

CT_DoExecLog DEBUG touch "${CT_WORK_DIR}/foo"

CT_TestAndAbort "Your file system in '${CT_WORK_DIR}' is *not* case-sensitive!" -f "${CT_WORK_DIR}/FOO"

CT_DoExecLog DEBUG rm -f "${CT_WORK_DIR}/foo"

# What's our shell?

# Will be plain /bin/sh on most systems, except if we have /bin/ash and we

# _explictly_ required using it

case "${CT_CONFIG_SHELL}" in

    sh)     CT_SHELL="/bin/sh";;

    ash)    CT_SHELL="/bin/ash";;

    bash)   CT_SHELL="${BASH}";;

    custom) CT_SHELL="${CT_CONFIG_SHELL_CUSTOM_PATH}";;

esac

# Check the user is using an existing SHELL to be used by ./configure and Makefiles

CT_TestOrAbort "The CONFIG_SHELL '${CT_CONFIG_SHELL}' (${CT_SHELL}) is not valid" -f "${CT_SHELL}" -a -x "${CT_SHELL}"

# Create the bin-overide early

# Contains symlinks to the tools found by ./configure

# Note: CT_DoLog and CT_DoExecLog do not use any of those tool, so

# they can be safely used

CT_TOOLS_OVERIDE_DIR="${CT_WORK_DIR}/tools"

CT_DoLog DEBUG "Creating bin-overide for tools in '${CT_TOOLS_OVERIDE_DIR}'"

CT_DoExecLog DEBUG mkdir -p "${CT_TOOLS_OVERIDE_DIR}/bin"

cat "${CT_LIB_DIR}/paths.mk" |while read trash line; do

    tool="${line%%=*}"

    path="${line#*=}"

    CT_DoLog DEBUG "Creating script-override for '${tool}' -> '${path}'"

    printf "#${BANG}${CT_SHELL}\nexec '${path}' \"\${@}\"\n" >"${CT_TOOLS_OVERIDE_DIR}/bin/${tool}"

    CT_DoExecLog ALL chmod 700 "${CT_TOOLS_OVERIDE_DIR}/bin/${tool}"

done

export PATH="${CT_TOOLS_OVERIDE_DIR}/bin:${PATH}"

# Start date. Can't be done until we know the locale

# Also requires the bin-override tools

CT_STAR_DATE=$(CT_DoDate +%s%N)

CT_STAR_DATE_HUMAN=$(CT_DoDate +%Y%m%d.%H%M%S)

# Log real begining of build, now

CT_DoLog INFO "Build started ${CT_STAR_DATE_HUMAN}"

CT_DoStep DEBUG "Dumping user-supplied crosstool-NG configuration"

CT_DoExecLog DEBUG grep -E '^(# |)CT_' .config

CT_EndStep

CT_DoLog DEBUG "Unsetting and unexporting MAKEFLAGS"

unset MAKEFLAGS

export MAKEFLAGS

CT_DoLog INFO "Building environment variables"

# Include sub-scripts instead of calling them: that way, we do not have to

# export any variable, nor re-parse the configuration and functions files.

. "${CT_LIB_DIR}/scripts/build/internals.sh"

. "${CT_LIB_DIR}/scripts/build/arch/${CT_ARCH}.sh"

. "${CT_LIB_DIR}/scripts/build/companion_tools.sh"

. "${CT_LIB_DIR}/scripts/build/kernel/${CT_KERNEL}.sh"

. "${CT_LIB_DIR}/scripts/build/companion_libs/gmp.sh"

. "${CT_LIB_DIR}/scripts/build/companion_libs/mpfr.sh"

. "${CT_LIB_DIR}/scripts/build/companion_libs/ppl.sh"

. "${CT_LIB_DIR}/scripts/build/companion_libs/cloog.sh"

. "${CT_LIB_DIR}/scripts/build/companion_libs/mpc.sh"

. "${CT_LIB_DIR}/scripts/build/companion_libs/libelf.sh"

. "${CT_LIB_DIR}/scripts/build/binutils/binutils.sh"

. "${CT_LIB_DIR}/scripts/build/binutils/elf2flt.sh"

. "${CT_LIB_DIR}/scripts/build/binutils/sstrip.sh"

. "${CT_LIB_DIR}/scripts/build/libc/${CT_LIBC}.sh"

. "${CT_LIB_DIR}/scripts/build/cc/${CT_CC}.sh"

. "${CT_LIB_DIR}/scripts/build/debug.sh"

. "${CT_LIB_DIR}/scripts/build/test_suite.sh"

# Target tuple: CT_TARGET needs a little love:

CT_DoBuildTargetTuple

# Kludge: If any of the configured options needs CT_TARGET,

# then rescan the options file now:

. .config

# Sanity check some directories

CT_TestAndAbort "'CT_PREFIX_DIR' is not set: where should I install?" -z "${CT_PREFIX_DIR}"

# Second kludge: merge user-supplied target CFLAGS with architecture-provided

# target CFLAGS. Do the same for LDFLAGS in case it happens in the future.

# Put user-supplied flags at the end, so that they take precedence.

CT_TARGET_CFLAGS="${CT_ARCH_TARGET_CFLAGS} ${CT_TARGET_CFLAGS}"

CT_TARGET_LDFLAGS="${CT_ARCH_TARGET_LDFLAGS} ${CT_TARGET_LDFLAGS}"

CT_CC_CORE_EXTRA_CONFIG="${CT_ARCH_CC_CORE_EXTRA_CONFIG} ${CT_CC_CORE_EXTRA_CONFIG}"

CT_CC_EXTRA_CONFIG="${CT_ARCH_CC_EXTRA_CONFIG} ${CT_CC_EXTRA_CONFIG}"

# Compute the working directories names

CT_TARBALLS_DIR="${CT_WORK_DIR}/tarballs"

CT_SRC_DIR="${CT_WORK_DIR}/src"

CT_BUILD_DIR="${CT_WORK_DIR}/${CT_TARGET}/build"

CT_BUILDTOOLS_PREFIX_DIR="${CT_WORK_DIR}/${CT_TARGET}/buildtools"

CT_STATE_DIR="${CT_WORK_DIR}/${CT_TARGET}/state"

CT_CONFIG_DIR="${CT_BUILD_DIR}/configs"

if [ "${CT_COMPLIBS_SHARED}" = "y" ]; then

    CT_COMPLIBS_DIR="${CT_PREFIX_DIR}"

    # Set LD_LIBRARY_PATH to point to prefix/lib so we can find our own

    # libraries; add as first path, so we get hit first by the dynamic linker

    CT_SetLibPath "${CT_COMPLIBS_DIR}/lib" first

else

    CT_COMPLIBS_DIR="${CT_BUILD_DIR}/static"

fi

# Compute test suite install directory

CT_TEST_SUITE_DIR=${CT_INSTALL_DIR}/test-suite

# Note: we'll always install the core compiler in its own directory, so as to

# not mix the two builds: core and final.

CT_CC_CORE_STATIC_PREFIX_DIR="${CT_BUILD_DIR}/${CT_CC}-core-static"

CT_CC_CORE_SHARED_PREFIX_DIR="${CT_BUILD_DIR}/${CT_CC}-core-shared"

# We must ensure that we can restart if asked for!

if [ -n "${CT_RESTART}" -a ! -d "${CT_STATE_DIR}"  ]; then

    CT_DoLog ERROR "You asked to restart a non-restartable build"

    CT_DoLog ERROR "This happened because you didn't set CT_DEBUG_CT_SAVE_STEPS"

    CT_DoLog ERROR "in the config options for the previous build, or the state"

    CT_DoLog ERROR "directory for the previous build was deleted."

    CT_Abort "I will stop here to avoid any carnage"

fi

# If the local tarball directory does not exist, say so, and don't try to save there!

if [    "${CT_SAVE_TARBALLS}" = "y"     \

     -a ! -d "${CT_LOCAL_TARBALLS_DIR}" ]; then

    CT_DoLog WARN "Directory '${CT_LOCAL_TARBALLS_DIR}' does not exist."

    CT_DoLog WARN "Will not save downloaded tarballs to local storage."

    CT_SAVE_TARBALLS=

fi

# Check now if we can write to the destination directory:

if [ -d "${CT_INSTALL_DIR}" ]; then

    CT_TestAndAbort "Destination directory '${CT_INSTALL_DIR}' is not removable" ! -w $(dirname "${CT_INSTALL_DIR}")

fi

# Good, now grab a bit of informations on the system we're being run on,

# just in case something goes awok, and it's not our fault:

CT_SYS_USER=$(id -un)

CT_SYS_HOSTNAME=$(hostname -f 2>/dev/null || true)

# Hmmm. Some non-DHCP-enabled machines do not have an FQDN... Fall back to node name.

CT_SYS_HOSTNAME="${CT_SYS_HOSTNAME:-$(uname -n)}"

CT_SYS_KERNEL=$(uname -s)

CT_SYS_REVISION=$(uname -r)

CT_SYS_OS=$(uname -s)

CT_SYS_MACHINE=$(uname -m)

CT_SYS_PROCESSOR=$(uname -p)

CT_SYS_GCC=$(gcc -dumpversion)

CT_SYS_TARGET=$(CT_DoConfigGuess)

CT_TOOLCHAIN_ID="crosstool-${CT_VERSION} build ${CT_STAR_DATE_HUMAN} by ${CT_SYS_USER}@${CT_SYS_HOSTNAME}"

CT_DoLog EXTRA "Preparing working directories"

# Ah! The build directory shall be eradicated, even if we restart!

if [ -d "${CT_BUILD_DIR}" ]; then

    CT_DoForceRmdir "${CT_BUILD_DIR}"

fi

# Don't eradicate directories if we need to restart

if [ -z "${CT_RESTART}" ]; then

    # Get rid of pre-existing installed toolchain and previous build directories.

    if [ "${CT_FORCE_DOWNLOAD}" = "y" -a -d "${CT_TARBALLS_DIR}" ]; then

        CT_DoForceRmdir "${CT_TARBALLS_DIR}"

    fi

    if [ "${CT_FORCE_EXTRACT}" = "y" -a -d "${CT_SRC_DIR}" ]; then

        CT_DoForceRmdir "${CT_SRC_DIR}"

    fi

    if [ -d "${CT_INSTALL_DIR}" -a "${CT_RM_RF_PREFIX_DIR}" = "y" ]; then

        CT_DoForceRmdir "${CT_INSTALL_DIR}"

    fi

    # In case we start anew, get rid of the previously saved state directory

    if [ -d "${CT_STATE_DIR}" ]; then

        CT_DoForceRmdir "${CT_STATE_DIR}"

    fi

fi

# Create the directories we'll use, even if restarting: it does no harm to

# create already existent directories, and CT_BUILD_DIR needs to be created

# anyway

CT_DoExecLog ALL mkdir -p "${CT_TARBALLS_DIR}"

CT_DoExecLog ALL mkdir -p "${CT_SRC_DIR}"

CT_DoExecLog ALL mkdir -p "${CT_BUILD_DIR}"

CT_DoExecLog ALL mkdir -p "${CT_BUILDTOOLS_PREFIX_DIR}/bin"

CT_DoExecLog ALL mkdir -p "${CT_CONFIG_DIR}"

CT_DoExecLog ALL mkdir -p "${CT_INSTALL_DIR}"

CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}"

CT_DoExecLog ALL mkdir -p "${CT_COMPLIBS_DIR}"

if [ -z "${CT_CANADIAN}" ]; then

    CT_DoExecLog ALL mkdir -p "${CT_CC_CORE_STATIC_PREFIX_DIR}"

    CT_DoExecLog ALL mkdir -p "${CT_CC_CORE_SHARED_PREFIX_DIR}"

fi

# Only create the state dir if asked for a restartable build

[ -n "${CT_DEBUG_CT_SAVE_STEPS}" ] && CT_DoExecLog ALL mkdir -p "${CT_STATE_DIR}"

# Check install file system case-sensitiveness

CT_DoExecLog DEBUG touch "${CT_PREFIX_DIR}/foo"

CT_TestAndAbort "Your file system in '${CT_PREFIX_DIR}' is *not* case-sensitive!" -f "${CT_PREFIX_DIR}/FOO"

CT_DoExecLog DEBUG rm -f "${CT_PREFIX_DIR}/foo"

# Kludge: CT_INSTALL_DIR and CT_PREFIX_DIR might have grown read-only if

# the previous build was successful.

CT_DoExecLog ALL chmod -R u+w "${CT_INSTALL_DIR}" "${CT_PREFIX_DIR}"

# Setting up the rest of the environment only if not restarting

if [ -z "${CT_RESTART}" ]; then

    case "${CT_SYSROOT_NAME}" in

        "")     CT_SYSROOT_NAME="sysroot";;

        .)      CT_Abort "Sysroot name is set to '.' which is forbidden";;

        *' '*)  CT_Abort "Sysroot name contains forbidden space(s): '${CT_SYSROOT_NAME}'";;

        */*)    CT_Abort "Sysroot name contains forbidden slash(es): '${CT_SYSROOT_NAME}'";;

    esac

    # Arrange paths depending on wether we use sysroot or not.

    if [ "${CT_USE_SYSROOT}" = "y" ]; then

        CT_SYSROOT_REL_DIR="${CT_SYSROOT_DIR_PREFIX}/${CT_SYSROOT_NAME}"

        CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/${CT_SYSROOT_REL_DIR}"

        CT_DEBUGROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}/${CT_SYSROOT_DIR_PREFIX}/debug-root"

        CT_HEADERS_DIR="${CT_SYSROOT_DIR}/usr/include"

        CT_SanitiseVarDir CT_SYSROOT_REL_DIR CT_SYSROOT_DIR CT_DEBUGROOT_DIR CT_HEADERS_DIR 

        BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"

        CC_CORE_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"

        CC_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"

        LIBC_SYSROOT_ARG=""

        # glibc's prefix must be exactly /usr, else --with-sysroot'd gcc will get

        # confused when $sysroot/usr/include is not present.

        # Note: --prefix=/usr is magic!

        # See http://www.gnu.org/software/libc/FAQ.html#s-2.2

    else

        # plain old way. All libraries in prefix/target/lib

        CT_SYSROOT_DIR="${CT_PREFIX_DIR}/${CT_TARGET}"

        CT_DEBUGROOT_DIR="${CT_SYSROOT_DIR}"

        CT_HEADERS_DIR="${CT_SYSROOT_DIR}/include"

        CT_SanitiseVarDir CT_SYSROOT_DIR CT_DEBUGROOT_DIR CT_HEADERS_DIR 

        # hack!  Always use --with-sysroot for binutils.

        # binutils 2.14 and later obey it, older binutils ignore it.

        # Lets you build a working 32->64 bit cross gcc

        BINUTILS_SYSROOT_ARG="--with-sysroot=${CT_SYSROOT_DIR}"

        # Use --with-headers, else final gcc will define disable_glibc while

        # building libgcc, and you'll have no profiling

        CC_CORE_SYSROOT_ARG="--without-headers"

        CC_SYSROOT_ARG="--with-headers=${CT_HEADERS_DIR}"

        LIBC_SYSROOT_ARG="prefix="

    fi

    CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}"

    CT_DoExecLog ALL mkdir -p "${CT_DEBUGROOT_DIR}"

    # Prepare the 'lib' directories in sysroot, else the ../lib64 hack used by

    # 32 -> 64 bit crosscompilers won't work, and build of final gcc will fail

    # with: "ld: cannot open crti.o: No such file or directory"

    # Also prepare the lib directory in the install dir, else some 64 bit archs

    # won't build

    CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}/lib"

    CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/lib"

    CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/usr/lib"

    CT_DoExecLog ALL mkdir -p "${CT_SYSROOT_DIR}/usr/include"

    if [ "${CT_USE_SYSROOT}" = "y" ]; then

        # Prevent gcc from installing its libraries outside of the sysroot

        CT_DoExecLog ALL ln -sf ".${CT_SYSROOT_REL_DIR}/lib" "${CT_PREFIX_DIR}/${CT_TARGET}/lib"

    fi

    # Since we're *not* multilib on the target side, we want all the

    # libraries to end up in "lib".  We create "lib64" (for 64-bit

    # build or host architectures) and "lib32" (for 32-bit emulation

    # on 64-bit) as symlinks to "lib".

    #

    # Not all of these symlinks are necessary, but better safe than

    # sorry. They are summarily removed by build/internals.sh:do_finish.

    for d in                            \

        "${CT_PREFIX_DIR}"              \

        "${CT_SYSROOT_DIR}"             \

        "${CT_SYSROOT_DIR}/usr"         \

        "${CT_PREFIX_DIR}/${CT_TARGET}" \

    ; do

        CT_DoExecLog ALL ln -sf "lib" "${d}/lib32"

        CT_DoExecLog ALL ln -sf "lib" "${d}/lib64"

    done

    # Determine build system if not set by the user

    if [ -z "${CT_BUILD}" ]; then

        CT_BUILD=$(CT_DoConfigGuess)

    fi

    # Prepare mangling patterns to later modify BUILD and HOST (see below)

    case "${CT_TOOLCHAIN_TYPE}" in

        cross)

            # A cross-compiler runs on the same machine it is built on

            CT_HOST="${CT_BUILD}"

            build_mangle="build_"

            host_mangle="build_"

            target_mangle=""

            install_build_tools_for="BUILD HOST"

            ;;

        canadian)

            build_mangle="build_"

            host_mangle="host_"

            target_mangle=""

            install_build_tools_for="BUILD HOST TARGET"

            ;;

        *)  CT_Abort "No code for '${CT_TOOLCHAIN_TYPE}' toolchain type!"

            ;;

    esac

    # Save the real tuples to generate shell-wrappers to the real tools

    CT_REAL_BUILD="${CT_BUILD}"

    CT_REAL_HOST="${CT_HOST}"

    CT_REAL_TARGET="${CT_TARGET}"

    # Canonicalise CT_BUILD and CT_HOST

    # Not only will it give us full-qualified tuples, but it will also ensure

    # that they are valid tuples (in case of typo with user-provided tuples)

    # That's way better than trying to rewrite config.sub ourselves...

    # CT_TARGET is already made canonical in CT_DoBuildTargetTuple

    CT_BUILD=$(CT_DoConfigSub "${CT_BUILD}")

    CT_HOST=$(CT_DoConfigSub "${CT_HOST}")

    # Modify BUILD and HOST so that gcc always generate a cross-compiler

    # even if any of the build, host or target machines are the same.

    # NOTE: we'll have to mangle the (BUILD|HOST)->TARGET x-compiler to

    #       support canadain build, later...

    CT_BUILD="${CT_BUILD/-/-${build_mangle}}"

    CT_HOST="${CT_HOST/-/-${host_mangle}}"

    CT_TARGET="${CT_TARGET/-/-${target_mangle}}"

    # Now we have mangled our BUILD and HOST tuples, we must fake the new

    # cross-tools for those mangled tuples.

    CT_DoLog DEBUG "Making build system tools available"

    for m in ${install_build_tools_for}; do

        r="CT_REAL_${m}"

        v="CT_${m}"

        p="CT_${m}_PREFIX"

        s="CT_${m}_SUFFIX"

        if [ -n "${!p}" ]; then

            t="${!p}"

        else

            t="${!r}-"

        fi

        for tool in ar as dlltool gcc g++ gcj gnatbind gnatmake ld nm objcopy objdump ranlib strip windres; do

            # First try with prefix + suffix

            # Then try with prefix only

            # Then try with suffix only, but only for BUILD, and HOST iff REAL_BUILD == REAL_HOST

            # Finally try with neither prefix nor suffix, but only for BUILD, and HOST iff REAL_BUILD == REAL_HOST

            # This is needed, because some tools have a prefix and

            # a suffix (eg. gcc), while others may have only one,

            # or even none (eg. binutils)

            where=$(CT_Which "${t}${tool}${!s}")

            [ -z "${where}" ] && where=$(CT_Which "${t}${tool}")

            if [    -z "${where}"                         \

                 -a \(    "${m}" = "BUILD"                \

                       -o "${CT_REAL_BUILD}" = "${!r}" \) ]; then

                where=$(CT_Which "${tool}${!s}")

            fi

            if [ -z "${where}"                            \

                 -a \(    "${m}" = "BUILD"                \

                       -o "${CT_REAL_BUILD}" = "${!r}" \) ]; then

                where=$(CT_Which "${tool}")

            fi

            # Not all tools are available for all platforms, but some are really,

            # bally needed

            if [ -n "${where}" ]; then

                CT_DoLog DEBUG "  '${!v}-${tool}' -> '${where}'"

                printf "#${BANG}${CT_SHELL}\nexec '${where}' \"\${@}\"\n" >"${CT_BUILDTOOLS_PREFIX_DIR}/bin/${!v}-${tool}"

                CT_DoExecLog ALL chmod 700 "${CT_BUILDTOOLS_PREFIX_DIR}/bin/${!v}-${tool}"

            else

                case "${tool}" in

                    # We'll at least need some of them...

                    ar|as|gcc|ld|nm|objcopy|objdump|ranlib)

                        CT_Abort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!"

                        ;;

                    # Some are conditionnally required

                    # Add them in alphabetical (C locale) ordering

                    g++)

                        # g++ (needed for companion lib), only needed for HOST

                        CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${m}" = "HOST"

                        ;;

                    gcj)

                        CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${CT_CC_LANG_JAVA}" = "y"

                        ;;

                    strip)

                        CT_TestAndAbort "Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : either needed!" "${CT_STRIP_ALL_TOOLCHAIN_EXECUTABLES}" = "y"

                        ;;

                    # If any other is missing, only warn at low level

                    *)

                        # It does not deserve a WARN level.

                        CT_DoLog DEBUG "  Missing: '${t}${tool}${!s}' or '${t}${tool}' or '${tool}' : not required."

                        ;;

                esac

            fi

        done

    done

    # Some makeinfo versions are a pain in [put your most sensible body part here].

    # Go ahead with those, by creating a wrapper that keeps partial files, and that

    # never fails:

    CT_DoLog DEBUG "  'makeinfo' -> '$(CT_Which makeinfo)'"

    printf "#${BANG}${CT_SHELL}\n$(CT_Which makeinfo) --force \"\${@}\"\ntrue\n" >"${CT_BUILDTOOLS_PREFIX_DIR}/bin/makeinfo"

    CT_DoExecLog ALL chmod 700 "${CT_BUILDTOOLS_PREFIX_DIR}/bin/makeinfo"

    # Carefully add paths in the order we want them:

    #  - first try in ${CT_PREFIX_DIR}/bin

    #  - then try in ${CT_CC_CORE_SHARED_PREFIX_DIR}/bin

    #  - then try in ${CT_CC_CORE_STATIC_PREFIX_DIR}/bin

    #  - fall back to searching user's PATH

    # Of course, neither cross-native nor canadian can run on BUILD,

    # so don't add those PATHs in this case...

    case "${CT_TOOLCHAIN_TYPE}" in

        cross)  export PATH="${CT_BUILDTOOLS_PREFIX_DIR}/bin:${CT_PREFIX_DIR}/bin:${CT_CC_CORE_SHARED_PREFIX_DIR}/bin:${CT_CC_CORE_STATIC_PREFIX_DIR}/bin:${PATH}";;

        canadian) export PATH="${CT_BUILDTOOLS_PREFIX_DIR}/bin:${PATH}";;

        *)  ;;

    esac

    # Help gcc

    CT_CFLAGS_FOR_HOST=

    [ "${CT_USE_PIPES}" = "y" ] && CT_CFLAGS_FOR_HOST="${CT_CFLAGS_FOR_HOST} -pipe"

    # Override the configured jobs with what's been given on the command line

    [ -n "${CT_JOBS}" ] && CT_PARALLEL_JOBS="${CT_JOBS}"

    # Set the shell to be used by ./configure scripts and by Makefiles (those

    # that support it!).

    export CONFIG_SHELL="${CT_SHELL}"   # for ./configure

    export SHELL="${CT_SHELL}"          # for Makefiles

    # And help make go faster

    JOBSFLAGS=

    [ ${CT_PARALLEL_JOBS} -ne 0 ] && JOBSFLAGS="${JOBSFLAGS} -j${CT_PARALLEL_JOBS}"

    [ ${CT_LOAD} -ne 0 ] && JOBSFLAGS="${JOBSFLAGS} -l${CT_LOAD}"

    CT_DoLog EXTRA "Installing user-supplied crosstool-NG configuration"

    CT_DoExecLog ALL mkdir -p "${CT_PREFIX_DIR}/bin"

    CT_DoExecLog DEBUG install -m 0755 "${CT_LIB_DIR}/scripts/toolchain-config.in" "${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"

    CT_DoExecLog DEBUG sed -i -e 's,@@grep@@,"'"${grep}"'",;' "${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"

    bzip2 -c -9 .config >>"${CT_PREFIX_DIR}/bin/${CT_TARGET}-ct-ng.config"

    CT_DoStep EXTRA "Dumping internal crosstool-NG configuration"

    CT_DoLog EXTRA "Building a toolchain for:"

    CT_DoLog EXTRA "  build  = ${CT_REAL_BUILD}"

    CT_DoLog EXTRA "  host   = ${CT_REAL_HOST}"

    CT_DoLog EXTRA "  target = ${CT_TARGET}"

    set |grep -E '^CT_.+=' |sort |CT_DoLog DEBUG

    CT_DoLog DEBUG "Other environment:"

    printenv |grep -v -E '^CT_.+=' |CT_DoLog DEBUG

    CT_EndStep

fi

if [ -z "${CT_RESTART}" ]; then

    if [ "${CT_FORBID_DOWNLOAD}" = "y" ]; then

        CT_DoLog INFO "Downloading forbidden by configuration, skipping downloads"

    else

        CT_DoStep INFO "Retrieving needed toolchain components' tarballs"

        do_companion_tools_get

        do_kernel_get

        do_gmp_get

        do_mpfr_get

        do_ppl_get

        do_cloog_get

        do_mpc_get

        do_libelf_get

        do_binutils_get

        do_elf2flt_get

        do_sstrip_get

        do_cc_get

        do_libc_get

        do_debug_get

        do_test_suite_get

        CT_EndStep

    fi

    if [ "${CT_ONLY_DOWNLOAD}" != "y" ]; then

        if [ "${CT_FORCE_EXTRACT}" = "y" ]; then

            CT_DoForceRmdir "${CT_SRC_DIR}"

            CT_DoExecLog ALL mkdir -p "${CT_SRC_DIR}"

        fi

        if [ "${CT_COMP_TOOLS}" = "y" ]; then

          CT_DoStep INFO "Extracting, patching and installing companion tools"

          do_companion_tools_extract

          do_companion_tools

          CT_EndStep

        fi

        CT_DoStep INFO "Extracting and patching toolchain components"

        do_kernel_extract

        do_gmp_extract

        do_mpfr_extract

        do_ppl_extract

        do_cloog_extract

        do_mpc_extract

        do_libelf_extract

        do_binutils_extract

        do_elf2flt_extract

        do_sstrip_extract

        do_cc_extract

        do_libc_extract

        do_debug_extract

        do_test_suite_extract

        CT_EndStep

    fi

fi

# Now for the job by itself. Go have a coffee!

if [ "${CT_ONLY_DOWNLOAD}" != "y" -a "${CT_ONLY_EXTRACT}" != "y" ]; then

    # Because of CT_RESTART, this becomes quite complex

    do_stop=0

    prev_step=

    [ -n "${CT_RESTART}" ] && do_it=0 || do_it=1

    # Aha! CT_STEPS comes from steps.mk!

    for step in ${CT_STEPS}; do

        if [ ${do_it} -eq 0 ]; then

            if [ "${CT_RESTART}" = "${step}" ]; then

                CT_DoLoadState "${step}"

                do_it=1

                do_stop=0

            fi

        else

            CT_DoSaveState ${step}

            if [ ${do_stop} -eq 1 ]; then

                CT_DoLog ERROR "Stopping just after step '${prev_step}', as requested."

                exit 0

            fi

        fi

        if [ ${do_it} -eq 1 ]; then

            do_${step}

            if [ "${CT_STOP}" = "${step}" ]; then

                do_stop=1

            fi

            if [ "${CT_DEBUG_PAUSE_STEPS}" = "y" ]; then

                CT_DoPause "Step '${step}' finished"

            fi

        fi

        prev_step="${step}"

    done

fi

CT_DoEnd INFO

# From now-on, it can become impossible to log any time, because

# either we're compressing the log file, or it can become RO any

# moment... Consign all ouptut to oblivion...

CT_DoLog INFO "Finishing installation (may take a few seconds)..."

exec >/dev/null 2>&1

if [ "${CT_LOG_TO_FILE}" = "y" ]; then

    cp "${tmp_log_file}" "${CT_PREFIX_DIR}/build.log"

    if [ "${CT_LOG_FILE_COMPRESS}" = y ]; then

        bzip2 -9 "${CT_PREFIX_DIR}/build.log"

    fi

fi

[ "${CT_INSTALL_DIR_RO}" = "y"  ] && chmod -R a-w "${CT_INSTALL_DIR}"

[ "${CT_TEST_SUITE}" = "y" ] && chmod -R u+w "${CT_TEST_SUITE_DIR}"

trap - EXIT